drm: Add crtc->name and use it in debug messages
Show a sensible name for the crtc in debug mesages. The driver may
supply its own name, otherwise the core genrates the name
("crtc-0", "crtc-1" etc.).
v2: kstrdup() the name passed by the caller (Jani)
v3: Generate a default name if the driver doesn't supply one
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1449592922-5545-6-git-send-email-ville.syrjala@linux.intel.com
diff --git a/drivers/gpu/drm/drm_atomic_helper.c b/drivers/gpu/drm/drm_atomic_helper.c
index 110f3db..6ba3fe5 100644
--- a/drivers/gpu/drm/drm_atomic_helper.c
+++ b/drivers/gpu/drm/drm_atomic_helper.c
@@ -143,9 +143,9 @@
*/
WARN_ON(!drm_modeset_is_locked(&config->connection_mutex));
- DRM_DEBUG_ATOMIC("[ENCODER:%d:%s] in use on [CRTC:%d], stealing it\n",
+ DRM_DEBUG_ATOMIC("[ENCODER:%d:%s] in use on [CRTC:%d:%s], stealing it\n",
encoder->base.id, encoder->name,
- encoder_crtc->base.id);
+ encoder_crtc->base.id, encoder_crtc->name);
crtc_state = drm_atomic_get_crtc_state(state, encoder_crtc);
if (IS_ERR(crtc_state))
@@ -246,12 +246,13 @@
}
if (new_encoder == connector_state->best_encoder) {
- DRM_DEBUG_ATOMIC("[CONNECTOR:%d:%s] keeps [ENCODER:%d:%s], now on [CRTC:%d]\n",
+ DRM_DEBUG_ATOMIC("[CONNECTOR:%d:%s] keeps [ENCODER:%d:%s], now on [CRTC:%d:%s]\n",
connector->base.id,
connector->name,
new_encoder->base.id,
new_encoder->name,
- connector_state->crtc->base.id);
+ connector_state->crtc->base.id,
+ connector_state->crtc->name);
return 0;
}
@@ -285,12 +286,13 @@
crtc_state = state->crtc_states[idx];
crtc_state->connectors_changed = true;
- DRM_DEBUG_ATOMIC("[CONNECTOR:%d:%s] using [ENCODER:%d:%s] on [CRTC:%d]\n",
+ DRM_DEBUG_ATOMIC("[CONNECTOR:%d:%s] using [ENCODER:%d:%s] on [CRTC:%d:%s]\n",
connector->base.id,
connector->name,
new_encoder->base.id,
new_encoder->name,
- connector_state->crtc->base.id);
+ connector_state->crtc->base.id,
+ connector_state->crtc->name);
return 0;
}
@@ -374,8 +376,8 @@
ret = funcs->mode_fixup(crtc, &crtc_state->mode,
&crtc_state->adjusted_mode);
if (!ret) {
- DRM_DEBUG_ATOMIC("[CRTC:%d] fixup failed\n",
- crtc->base.id);
+ DRM_DEBUG_ATOMIC("[CRTC:%d:%s] fixup failed\n",
+ crtc->base.id, crtc->name);
return -EINVAL;
}
}
@@ -422,14 +424,14 @@
for_each_crtc_in_state(state, crtc, crtc_state, i) {
if (!drm_mode_equal(&crtc->state->mode, &crtc_state->mode)) {
- DRM_DEBUG_ATOMIC("[CRTC:%d] mode changed\n",
- crtc->base.id);
+ DRM_DEBUG_ATOMIC("[CRTC:%d:%s] mode changed\n",
+ crtc->base.id, crtc->name);
crtc_state->mode_changed = true;
}
if (crtc->state->enable != crtc_state->enable) {
- DRM_DEBUG_ATOMIC("[CRTC:%d] enable changed\n",
- crtc->base.id);
+ DRM_DEBUG_ATOMIC("[CRTC:%d:%s] enable changed\n",
+ crtc->base.id, crtc->name);
/*
* For clarity this assignment is done here, but
@@ -470,18 +472,18 @@
* a full modeset because update_connector_routing force that.
*/
if (crtc->state->active != crtc_state->active) {
- DRM_DEBUG_ATOMIC("[CRTC:%d] active changed\n",
- crtc->base.id);
+ DRM_DEBUG_ATOMIC("[CRTC:%d:%s] active changed\n",
+ crtc->base.id, crtc->name);
crtc_state->active_changed = true;
}
if (!drm_atomic_crtc_needs_modeset(crtc_state))
continue;
- DRM_DEBUG_ATOMIC("[CRTC:%d] needs all connectors, enable: %c, active: %c\n",
- crtc->base.id,
+ DRM_DEBUG_ATOMIC("[CRTC:%d:%s] needs all connectors, enable: %c, active: %c\n",
+ crtc->base.id, crtc->name,
crtc_state->enable ? 'y' : 'n',
- crtc_state->active ? 'y' : 'n');
+ crtc_state->active ? 'y' : 'n');
ret = drm_atomic_add_affected_connectors(state, crtc);
if (ret != 0)
@@ -495,8 +497,8 @@
crtc);
if (crtc_state->enable != !!num_connectors) {
- DRM_DEBUG_ATOMIC("[CRTC:%d] enabled/connectors mismatch\n",
- crtc->base.id);
+ DRM_DEBUG_ATOMIC("[CRTC:%d:%s] enabled/connectors mismatch\n",
+ crtc->base.id, crtc->name);
return -EINVAL;
}
@@ -559,8 +561,8 @@
ret = funcs->atomic_check(crtc, state->crtc_states[i]);
if (ret) {
- DRM_DEBUG_ATOMIC("[CRTC:%d] atomic driver check failed\n",
- crtc->base.id);
+ DRM_DEBUG_ATOMIC("[CRTC:%d:%s] atomic driver check failed\n",
+ crtc->base.id, crtc->name);
return ret;
}
}
@@ -673,8 +675,8 @@
funcs = crtc->helper_private;
- DRM_DEBUG_ATOMIC("disabling [CRTC:%d]\n",
- crtc->base.id);
+ DRM_DEBUG_ATOMIC("disabling [CRTC:%d:%s]\n",
+ crtc->base.id, crtc->name);
/* Right function depends upon target state. */
@@ -785,8 +787,8 @@
funcs = crtc->helper_private;
if (crtc->state->enable && funcs->mode_set_nofb) {
- DRM_DEBUG_ATOMIC("modeset on [CRTC:%d]\n",
- crtc->base.id);
+ DRM_DEBUG_ATOMIC("modeset on [CRTC:%d:%s]\n",
+ crtc->base.id, crtc->name);
funcs->mode_set_nofb(crtc);
}
@@ -885,8 +887,8 @@
funcs = crtc->helper_private;
if (crtc->state->enable) {
- DRM_DEBUG_ATOMIC("enabling [CRTC:%d]\n",
- crtc->base.id);
+ DRM_DEBUG_ATOMIC("enabling [CRTC:%d:%s]\n",
+ crtc->base.id, crtc->name);
if (funcs->enable)
funcs->enable(crtc);