Staging: rt2870: remove DOT11_N_SUPPORT ifdefs
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
diff --git a/drivers/staging/rt2870/2870_main_dev.c b/drivers/staging/rt2870/2870_main_dev.c
index 683a5ed..85e7553 100644
--- a/drivers/staging/rt2870/2870_main_dev.c
+++ b/drivers/staging/rt2870/2870_main_dev.c
@@ -709,7 +709,6 @@
}
}
-#ifdef DOT11_N_SUPPORT
// For Sigma debug, dump the ba_reordering sequence.
if((needDumpSeq == TRUE) && (pAd->CommonCfg.bDisableReordering == 0))
{
@@ -737,7 +736,6 @@
NdisReleaseSpinLock(&pBAEntry->RxReRingLock);
}
}
-#endif // DOT11_N_SUPPORT //
}
/*
diff --git a/drivers/staging/rt2870/Makefile b/drivers/staging/rt2870/Makefile
index 31ed480..3c17921 100644
--- a/drivers/staging/rt2870/Makefile
+++ b/drivers/staging/rt2870/Makefile
@@ -4,7 +4,6 @@
EXTRA_CFLAGS += -DLINUX -DAGGREGATION_SUPPORT -DPIGGYBACK_SUPPORT -DWMM_SUPPORT
EXTRA_CFLAGS += -DRT2870
EXTRA_CFLAGS += -DDBG
-EXTRA_CFLAGS += -DDOT11_N_SUPPORT
rt2870sta-objs := \
common/md5.o \
diff --git a/drivers/staging/rt2870/ap.h b/drivers/staging/rt2870/ap.h
index 42f005d..217df0e 100644
--- a/drivers/staging/rt2870/ap.h
+++ b/drivers/staging/rt2870/ap.h
@@ -419,10 +419,8 @@
IN PUCHAR pAddr,
IN USHORT Event);
-#ifdef DOT11_N_SUPPORT
VOID APUpdateOperationMode(
IN PRTMP_ADAPTER pAd);
-#endif // DOT11_N_SUPPORT //
VOID APUpdateCapabilityAndErpIe(
IN PRTMP_ADAPTER pAd);
diff --git a/drivers/staging/rt2870/chlist.h b/drivers/staging/rt2870/chlist.h
index 9e15b9d..60f8548 100644
--- a/drivers/staging/rt2870/chlist.h
+++ b/drivers/staging/rt2870/chlist.h
@@ -957,16 +957,12 @@
switch(PhyMode)
{
case PHY_11A:
-#ifdef DOT11_N_SUPPORT
case PHY_11AN_MIXED:
-#endif // DOT11_N_SUPPORT //
*pChType = BAND_5G;
break;
case PHY_11ABG_MIXED:
-#ifdef DOT11_N_SUPPORT
case PHY_11AGN_MIXED:
case PHY_11ABGN_MIXED:
-#endif // DOT11_N_SUPPORT //
*pChType = BAND_BOTH;
break;
@@ -1114,8 +1110,6 @@
}
}
-
-#ifdef DOT11_N_SUPPORT
static inline BOOLEAN IsValidChannel(
IN PRTMP_ADAPTER pAd,
IN UCHAR channel)
@@ -1273,8 +1267,6 @@
pAd->CommonCfg.CentralChannel = pAd->CommonCfg.Channel;
}
}
-#endif // DOT11_N_SUPPORT //
-
static inline UINT8 GetCuntryMaxTxPwr(
IN PRTMP_ADAPTER pAd,
diff --git a/drivers/staging/rt2870/common/action.c b/drivers/staging/rt2870/common/action.c
index 8fc4c83..932afb6 100644
--- a/drivers/staging/rt2870/common/action.c
+++ b/drivers/staging/rt2870/common/action.c
@@ -73,13 +73,11 @@
StateMachineSetAction(S, ACT_IDLE, MT2_PEER_DLS_CATE, (STATE_MACHINE_FUNC)ReservedAction);
-#ifdef DOT11_N_SUPPORT
StateMachineSetAction(S, ACT_IDLE, MT2_PEER_BA_CATE, (STATE_MACHINE_FUNC)PeerBAAction);
StateMachineSetAction(S, ACT_IDLE, MT2_PEER_HT_CATE, (STATE_MACHINE_FUNC)PeerHTAction);
StateMachineSetAction(S, ACT_IDLE, MT2_MLME_ADD_BA_CATE, (STATE_MACHINE_FUNC)MlmeADDBAAction);
StateMachineSetAction(S, ACT_IDLE, MT2_MLME_ORI_DELBA_CATE, (STATE_MACHINE_FUNC)MlmeDELBAAction);
StateMachineSetAction(S, ACT_IDLE, MT2_MLME_REC_DELBA_CATE, (STATE_MACHINE_FUNC)MlmeDELBAAction);
-#endif // DOT11_N_SUPPORT //
StateMachineSetAction(S, ACT_IDLE, MT2_PEER_PUBLIC_CATE, (STATE_MACHINE_FUNC)PeerPublicAction);
StateMachineSetAction(S, ACT_IDLE, MT2_PEER_RM_CATE, (STATE_MACHINE_FUNC)PeerRMAction);
@@ -89,7 +87,6 @@
StateMachineSetAction(S, ACT_IDLE, MT2_ACT_INVALID, (STATE_MACHINE_FUNC)MlmeInvalidAction);
}
-#ifdef DOT11_N_SUPPORT
VOID MlmeADDBAAction(
IN PRTMP_ADAPTER pAd,
IN MLME_QUEUE_ELEM *Elem)
@@ -254,7 +251,6 @@
DBGPRINT(RT_DEBUG_TRACE, ("BA - MlmeDELBAAction() . 3 DELBA sent. Initiator(%d)\n", pInfo->Initiator));
}
}
-#endif // DOT11_N_SUPPORT //
VOID MlmeQOSAction(
IN PRTMP_ADAPTER pAd,
@@ -282,7 +278,6 @@
{
}
-#ifdef DOT11_N_SUPPORT
VOID PeerBAAction(
IN PRTMP_ADAPTER pAd,
IN MLME_QUEUE_ELEM *Elem)
@@ -302,7 +297,6 @@
break;
}
}
-#endif // DOT11_N_SUPPORT //
VOID PeerPublicAction(
IN PRTMP_ADAPTER pAd,
@@ -337,7 +331,6 @@
return;
}
-#ifdef DOT11_N_SUPPORT
static VOID respond_ht_information_exchange_action(
IN PRTMP_ADAPTER pAd,
IN MLME_QUEUE_ELEM *Elem)
@@ -557,7 +550,6 @@
}
}
}
-#endif // DOT11_N_SUPPORT //
VOID ActHeaderInit(
IN PRTMP_ADAPTER pAd,
diff --git a/drivers/staging/rt2870/common/ba_action.c b/drivers/staging/rt2870/common/ba_action.c
index bbd759f..f9d4572 100644
--- a/drivers/staging/rt2870/common/ba_action.c
+++ b/drivers/staging/rt2870/common/ba_action.c
@@ -26,8 +26,6 @@
*/
-#ifdef DOT11_N_SUPPORT
-
#include "../rt_config.h"
@@ -1764,6 +1762,3 @@
#endif
}
}
-
-#endif // DOT11_N_SUPPORT //
-
diff --git a/drivers/staging/rt2870/common/cmm_data.c b/drivers/staging/rt2870/common/cmm_data.c
index 3b1e10e..ee7480c 100644
--- a/drivers/staging/rt2870/common/cmm_data.c
+++ b/drivers/staging/rt2870/common/cmm_data.c
@@ -281,9 +281,7 @@
{
// Fixed W52 with Activity scan issue in ABG_MIXED and ABGN_MIXED mode.
if (pAd->CommonCfg.PhyMode == PHY_11ABG_MIXED
-#ifdef DOT11_N_SUPPORT
|| pAd->CommonCfg.PhyMode == PHY_11ABGN_MIXED
-#endif // DOT11_N_SUPPORT //
)
{
if (pAd->LatchRfRegs.Channel > 14)
@@ -511,9 +509,7 @@
UCHAR TxFrameType = TX_UNKOWN_FRAME;
UCHAR Wcid;
MAC_TABLE_ENTRY *pMacEntry = NULL;
-#ifdef DOT11_N_SUPPORT
BOOLEAN bHTRate = FALSE;
-#endif // DOT11_N_SUPPORT //
Wcid = RTMP_GET_PACKET_WCID(pPacket);
if (Wcid == MCAST_WCID)
@@ -527,7 +523,6 @@
{ // It's a specific packet need to force low rate, i.e., bDHCPFrame, bEAPOLFrame, bWAIFrame
TxFrameType = TX_LEGACY_FRAME;
}
-#ifdef DOT11_N_SUPPORT
else if (IS_HT_RATE(pMacEntry))
{ // it's a 11n capable packet
@@ -547,7 +542,6 @@
else
TxFrameType = TX_LEGACY_FRAME;
}
-#endif // DOT11_N_SUPPORT //
else
{ // it's a legacy b/g packet.
if ((CLIENT_STATUS_TEST_FLAG(pMacEntry, fCLIENT_STATUS_AGGREGATION_CAPABLE) && pAd->CommonCfg.bAggregationCapable) &&
@@ -649,7 +643,7 @@
((pAd->OpMode == OPMODE_AP) && (pMacEntry->MaxHTPhyMode.field.MODE == MODE_CCK) && (pMacEntry->MaxHTPhyMode.field.MCS == RATE_1)))
{ // Specific packet, i.e., bDHCPFrame, bEAPOLFrame, bWAIFrame, need force low rate.
pTxBlk->pTransmit = &pAd->MacTab.Content[MCAST_WCID].HTPhyMode;
-#ifdef DOT11_N_SUPPORT
+
// Modify the WMM bit for ICV issue. If we have a packet with EOSP field need to set as 1, how to handle it???
if (IS_HT_STA(pTxBlk->pMacEntry) &&
(CLIENT_STATUS_TEST_FLAG(pMacEntry, fCLIENT_STATUS_RALINK_CHIPSET)) &&
@@ -658,16 +652,13 @@
TX_BLK_CLEAR_FLAG(pTxBlk, fTX_bWMM);
TX_BLK_SET_FLAG(pTxBlk, fTX_bForceNonQoS);
}
-#endif // DOT11_N_SUPPORT //
}
-#ifdef DOT11_N_SUPPORT
if ( (IS_HT_RATE(pMacEntry) == FALSE) &&
(CLIENT_STATUS_TEST_FLAG(pMacEntry, fCLIENT_STATUS_PIGGYBACK_CAPABLE)))
{ // Currently piggy-back only support when peer is operate in b/g mode.
TX_BLK_SET_FLAG(pTxBlk, fTX_bPiggyBack);
}
-#endif // DOT11_N_SUPPORT //
if (RTMP_GET_PACKET_MOREDATA(pPacket))
{
@@ -1048,7 +1039,6 @@
pTxWI->NSEQ = NSeq;
// John tune the performace with Intel Client in 20 MHz performance
-#ifdef DOT11_N_SUPPORT
BASize = pAd->CommonCfg.TxBASize;
if( BASize >7 )
@@ -1056,7 +1046,6 @@
pTxWI->BAWinSize = BASize;
pTxWI->ShortGI = pTransmit->field.ShortGI;
pTxWI->STBC = pTransmit->field.STBC;
-#endif // DOT11_N_SUPPORT //
pTxWI->WirelessCliID = WCID;
pTxWI->MPDUtotalByteCount = Length;
@@ -1069,7 +1058,6 @@
pTxWI->PHYMODE = pTransmit->field.MODE;
pTxWI->CFACK = CfAck;
-#ifdef DOT11_N_SUPPORT
if (pMac)
{
if (pAd->CommonCfg.bMIMOPSEnable)
@@ -1099,7 +1087,6 @@
pTxWI->MpduDensity = pMac->MpduDensity;
}
}
-#endif // DOT11_N_SUPPORT //
pTxWI->PacketId = pTxWI->MCS;
NdisMoveMemory(pOutTxWI, &TxWI, sizeof(TXWI_STRUC));
@@ -1113,10 +1100,7 @@
{
HTTRANSMIT_SETTING *pTransmit;
PMAC_TABLE_ENTRY pMacEntry;
-#ifdef DOT11_N_SUPPORT
UCHAR BASize;
-#endif // DOT11_N_SUPPORT //
-
ASSERT(pTxWI);
@@ -1142,7 +1126,6 @@
// If CCK or OFDM, BW must be 20
pTxWI->BW = (pTransmit->field.MODE <= MODE_OFDM) ? (BW_20) : (pTransmit->field.BW);
-#ifdef DOT11_N_SUPPORT
pTxWI->AMPDU = ((pTxBlk->TxFrameType == TX_AMPDU_FRAME) ? TRUE : FALSE);
// John tune the performace with Intel Client in 20 MHz performance
@@ -1164,12 +1147,10 @@
pTxWI->BAWinSize = BASize;
pTxWI->ShortGI = pTransmit->field.ShortGI;
pTxWI->STBC = pTransmit->field.STBC;
-#endif // DOT11_N_SUPPORT //
pTxWI->MCS = pTransmit->field.MCS;
pTxWI->PHYMODE = pTransmit->field.MODE;
-#ifdef DOT11_N_SUPPORT
if (pMacEntry)
{
if ((pMacEntry->MmpsMode == MMPS_DYNAMIC) && (pTransmit->field.MCS > 7))
@@ -1196,7 +1177,6 @@
pTxWI->MpduDensity = pMacEntry->MpduDensity;
}
}
-#endif // DOT11_N_SUPPORT //
#ifdef DBG_DIAGNOSE
if (pTxBlk->QueIdx== 0)
@@ -1241,7 +1221,6 @@
pTxWI->PacketId = pTransmit->field.MCS;
}
-#ifdef DOT11_N_SUPPORT
pTxWI->AMPDU = ((pMacEntry->NoBADataCountDown == 0) ? TRUE: FALSE);
pTxWI->MIMOps = 0;
@@ -1263,7 +1242,6 @@
}
}
}
-#endif // DOT11_N_SUPPORT //
#ifdef DBG_DIAGNOSE
if (pTxBlk->QueIdx== 0)
@@ -1380,12 +1358,10 @@
if (pMacEntry != NULL && CLIENT_STATUS_TEST_FLAG(pMacEntry, AFlags))
{
-#ifdef DOT11_N_SUPPORT
if (pMacEntry->HTPhyMode.field.MODE >= MODE_HTMIX)
{
return TRUE;
}
-#endif // DOT11_N_SUPPORT //
#ifdef AGGREGATION_SUPPORT
if (TxRate >= RATE_6 && pAd->CommonCfg.bAggregationCapable && (!(OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_WMM_INUSED) && CLIENT_STATUS_TEST_FLAG(pMacEntry, fCLIENT_STATUS_WMM_CAPABLE))))
@@ -1852,11 +1828,8 @@
// Delete this entry from ASIC on-chip WCID Table
RT28XX_STA_ENTRY_MAC_RESET(pAd, wcid);
-#ifdef DOT11_N_SUPPORT
// free resources of BA
BASessionTearDownALL(pAd, pEntry->Aid);
-#endif // DOT11_N_SUPPORT //
-
pPrevEntry = NULL;
pProbeEntry = pAd->MacTab.Hash[HashIdx];
@@ -1910,9 +1883,7 @@
//Reset operating mode when no Sta.
if (pAd->MacTab.Size == 0)
{
-#ifdef DOT11_N_SUPPORT
pAd->CommonCfg.AddHTInfo.AddHtInfo2.OperaionMode = 0;
-#endif // DOT11_N_SUPPORT //
AsicUpdateProtect(pAd, 0 /*pAd->CommonCfg.AddHTInfo.AddHtInfo2.OperaionMode*/, (ALLN_SETPROTECT), TRUE, 0 /*pAd->MacTab.fAnyStationNonGF*/);
}
@@ -1939,11 +1910,8 @@
{
if (pAd->MacTab.Content[i].ValidAsCLI == TRUE)
{
-
-#ifdef DOT11_N_SUPPORT
// free resources of BA
BASessionTearDownALL(pAd, i);
-#endif // DOT11_N_SUPPORT //
pAd->MacTab.Content[i].ValidAsCLI = FALSE;
@@ -2279,7 +2247,6 @@
STATS_INC_RX_PACKETS(pAd, FromWhichBSSID);
#ifdef RT2870
-#ifdef DOT11_N_SUPPORT
if (pAd->CommonCfg.bDisableReordering == 0)
{
PBA_REC_ENTRY pBAEntry;
@@ -2309,7 +2276,6 @@
}
}
}
-#endif // DOT11_N_SUPPORT //
#endif // RT2870 //
wlan_802_11_to_802_3_packet(pAd, pRxBlk, Header802_3, FromWhichBSSID);
@@ -2328,22 +2294,18 @@
IN RX_BLK *pRxBlk,
IN UCHAR FromWhichBSSID)
{
-#ifdef DOT11_N_SUPPORT
if (RX_BLK_TEST_FLAG(pRxBlk, fRX_AMPDU) && (pAd->CommonCfg.bDisableReordering == 0))
{
Indicate_AMPDU_Packet(pAd, pRxBlk, FromWhichBSSID);
}
else
-#endif // DOT11_N_SUPPORT //
{
-#ifdef DOT11_N_SUPPORT
if (RX_BLK_TEST_FLAG(pRxBlk, fRX_AMSDU))
{
// handle A-MSDU
Indicate_AMSDU_Packet(pAd, pRxBlk, FromWhichBSSID);
}
else
-#endif // DOT11_N_SUPPORT //
{
Indicate_Legacy_Packet(pAd, pRxBlk, FromWhichBSSID);
}
diff --git a/drivers/staging/rt2870/common/cmm_info.c b/drivers/staging/rt2870/common/cmm_info.c
index 99a5ca6..0b54351 100644
--- a/drivers/staging/rt2870/common/cmm_info.c
+++ b/drivers/staging/rt2870/common/cmm_info.c
@@ -63,7 +63,6 @@
IN PRTMP_ADAPTER pAd,
OUT PUCHAR pBuf);
-#ifdef DOT11_N_SUPPORT
INT Show_HtBw_Proc(
IN PRTMP_ADAPTER pAd,
OUT PUCHAR pBuf);
@@ -103,7 +102,6 @@
INT Show_HtAutoBa_Proc(
IN PRTMP_ADAPTER pAd,
OUT PUCHAR pBuf);
-#endif // DOT11_N_SUPPORT //
INT Show_CountryRegion_Proc(
IN PRTMP_ADAPTER pAd,
@@ -182,7 +180,6 @@
{"BGProtection", Show_BGProtection_Proc},
{"RTSThreshold", Show_RTSThreshold_Proc},
{"FragThreshold", Show_FragThreshold_Proc},
-#ifdef DOT11_N_SUPPORT
{"HtBw", Show_HtBw_Proc},
{"HtMcs", Show_HtMcs_Proc},
{"HtGi", Show_HtGi_Proc},
@@ -193,7 +190,6 @@
{"HtRdg", Show_HtRdg_Proc},
{"HtAmsdu", Show_HtAmsdu_Proc},
{"HtAutoBa", Show_HtAutoBa_Proc},
-#endif // DOT11_N_SUPPORT //
{"CountryRegion", Show_CountryRegion_Proc},
{"CountryRegionABand", Show_CountryRegionABand_Proc},
{"CountryCode", Show_CountryCode_Proc},
@@ -344,14 +340,12 @@
{
INT MaxPhyMode = PHY_11G;
-#ifdef DOT11_N_SUPPORT
MaxPhyMode = PHY_11N_5G;
-#endif // DOT11_N_SUPPORT //
if (WirelessMode <= MaxPhyMode)
{
RTMPSetPhyMode(pAd, WirelessMode);
-#ifdef DOT11_N_SUPPORT
+
if (WirelessMode >= PHY_11ABGN_MIXED)
{
pAd->CommonCfg.BACapability.field.AutoBA = TRUE;
@@ -362,7 +356,7 @@
pAd->CommonCfg.BACapability.field.AutoBA = FALSE;
pAd->CommonCfg.REGBACapability.field.AutoBA = FALSE;
}
-#endif // DOT11_N_SUPPORT //
+
// Set AdhocMode rates
if (pAd->StaCfg.BssType == BSS_ADHOC)
{
@@ -380,9 +374,7 @@
// it is needed to set SSID to take effect
if (success == TRUE)
{
-#ifdef DOT11_N_SUPPORT
SetCommonHT(pAd);
-#endif // DOT11_N_SUPPORT //
DBGPRINT(RT_DEBUG_TRACE, ("Set_WirelessMode_Proc::(=%ld)\n", WirelessMode));
}
else
@@ -419,7 +411,6 @@
if (MONITOR_ON(pAd))
{
-#ifdef DOT11_N_SUPPORT
N_ChannelCheck(pAd);
if (pAd->CommonCfg.PhyMode >= PHY_11ABGN_MIXED &&
pAd->CommonCfg.RegTransmitSetting.field.BW == BW_40)
@@ -431,7 +422,6 @@
pAd->CommonCfg.Channel, pAd->CommonCfg.CentralChannel));
}
else
-#endif // DOT11_N_SUPPORT //
{
AsicSwitchChannel(pAd, pAd->CommonCfg.Channel, FALSE);
AsicLockChannel(pAd, pAd->CommonCfg.Channel);
@@ -1489,12 +1479,10 @@
case PHY_11G:
case PHY_11BG_MIXED:
case PHY_11ABG_MIXED:
-#ifdef DOT11_N_SUPPORT
case PHY_11N_2_4G:
case PHY_11ABGN_MIXED:
case PHY_11BGN_MIXED:
case PHY_11GN_MIXED:
-#endif // DOT11_N_SUPPORT //
pAd->CommonCfg.SupRate[0] = 0x82; // 1 mbps, in units of 0.5 Mbps, basic rate
pAd->CommonCfg.SupRate[1] = 0x84; // 2 mbps, in units of 0.5 Mbps, basic rate
pAd->CommonCfg.SupRate[2] = 0x8B; // 5.5 mbps, in units of 0.5 Mbps, basic rate
@@ -1524,11 +1512,9 @@
break;
case PHY_11A:
-#ifdef DOT11_N_SUPPORT
case PHY_11AN_MIXED:
case PHY_11AGN_MIXED:
case PHY_11N_5G:
-#endif // DOT11_N_SUPPORT //
pAd->CommonCfg.SupRate[0] = 0x8C; // 6 mbps, in units of 0.5 Mbps, basic rate
pAd->CommonCfg.SupRate[1] = 0x12; // 9 mbps, in units of 0.5 Mbps
pAd->CommonCfg.SupRate[2] = 0x98; // 12 mbps, in units of 0.5 Mbps, basic rate
@@ -1558,8 +1544,6 @@
pAd->CommonCfg.BandState = UNKNOWN_BAND;
}
-
-#ifdef DOT11_N_SUPPORT
/*
========================================================================
Routine Description:
@@ -1947,7 +1931,6 @@
DBGPRINT(RT_DEBUG_TRACE,("RTMPUpdateHTIE <== \n"));
}
-#endif // DOT11_N_SUPPORT //
/*
========================================================================
@@ -2229,9 +2212,7 @@
COPY_MAC_ADDR(MacTab.Entry[MacTab.Num].Addr, &pAd->MacTab.Content[i].Addr);
MacTab.Entry[MacTab.Num].Aid = (UCHAR)pAd->MacTab.Content[i].Aid;
MacTab.Entry[MacTab.Num].Psm = pAd->MacTab.Content[i].PsMode;
-#ifdef DOT11_N_SUPPORT
MacTab.Entry[MacTab.Num].MimoPs = pAd->MacTab.Content[i].MmpsMode;
-#endif // DOT11_N_SUPPORT //
// Fill in RSSI per entry
MacTab.Entry[MacTab.Num].AvgRssi0 = pAd->MacTab.Content[i].RssiSample.AvgRssi0;
@@ -2297,7 +2278,6 @@
kfree(msg);
}
-#ifdef DOT11_N_SUPPORT
INT Set_BASetup_Proc(
IN PRTMP_ADAPTER pAd,
IN PUCHAR arg)
@@ -2982,10 +2962,7 @@
return TRUE;
}
-#endif // DOT11_N_SUPPORT //
-
-#ifdef DOT11_N_SUPPORT
INT SetCommonHT(
IN PRTMP_ADAPTER pAd)
{
@@ -3007,7 +2984,6 @@
return TRUE;
}
-#endif // DOT11_N_SUPPORT //
INT Set_FixedTxMode_Proc(
IN PRTMP_ADAPTER pAd,
@@ -3138,7 +3114,6 @@
case PHY_11G:
sprintf(pBuf, "\t11G");
break;
-#ifdef DOT11_N_SUPPORT
case PHY_11ABGN_MIXED:
sprintf(pBuf, "\t11A/B/G/N");
break;
@@ -3160,7 +3135,6 @@
case PHY_11N_5G:
sprintf(pBuf, "\t11N only with 5G");
break;
-#endif // DOT11_N_SUPPORT //
default:
sprintf(pBuf, "\tUnknow Value(%d)", pAd->CommonCfg.PhyMode);
break;
@@ -3254,7 +3228,6 @@
return 0;
}
-#ifdef DOT11_N_SUPPORT
INT Show_HtBw_Proc(
IN PRTMP_ADAPTER pAd,
OUT PUCHAR pBuf)
@@ -3376,7 +3349,6 @@
sprintf(pBuf, "\t%s", pAd->CommonCfg.BACapability.field.AutoBA ? "TRUE":"FALSE");
return 0;
}
-#endif // DOT11_N_SUPPORT //
INT Show_CountryRegion_Proc(
IN PRTMP_ADAPTER pAd,
diff --git a/drivers/staging/rt2870/common/cmm_sanity.c b/drivers/staging/rt2870/common/cmm_sanity.c
index 1650779..1376787 100644
--- a/drivers/staging/rt2870/common/cmm_sanity.c
+++ b/drivers/staging/rt2870/common/cmm_sanity.c
@@ -588,7 +588,6 @@
else
*pRalinkIe = 0xf0000000; // Set to non-zero value (can't set bit0-2) to represent this is Ralink Chip. So at linkup, we will set ralinkchip flag.
}
-#ifdef DOT11_N_SUPPORT
// This HT IE is before IEEE draft set HT IE value.2006-09-28 by Jan.
// Other vendors had production before IE_HT_CAP value is assigned. To backward support those old-firmware AP,
@@ -607,7 +606,6 @@
*AddHtInfoLen = SIZE_ADD_HT_INFO_IE;
}
}
-#endif // DOT11_N_SUPPORT //
else if (NdisEqualMemory(pEid->Octet, WPA_OUI, 4))
{
// Copy to pVIE which will report to microsoft bssid list.
diff --git a/drivers/staging/rt2870/common/cmm_sync.c b/drivers/staging/rt2870/common/cmm_sync.c
index ea843e2..aac30cf 100644
--- a/drivers/staging/rt2870/common/cmm_sync.c
+++ b/drivers/staging/rt2870/common/cmm_sync.c
@@ -95,9 +95,7 @@
// if not 11a-only mode, channel list starts from 2.4Ghz band
if ((pAd->CommonCfg.PhyMode != PHY_11A)
-#ifdef DOT11_N_SUPPORT
&& (pAd->CommonCfg.PhyMode != PHY_11AN_MIXED) && (pAd->CommonCfg.PhyMode != PHY_11N_5G)
-#endif // DOT11_N_SUPPORT //
)
{
switch (pAd->CommonCfg.CountryRegion & 0x7f)
@@ -146,10 +144,8 @@
}
if ((pAd->CommonCfg.PhyMode == PHY_11A) || (pAd->CommonCfg.PhyMode == PHY_11ABG_MIXED)
-#ifdef DOT11_N_SUPPORT
|| (pAd->CommonCfg.PhyMode == PHY_11ABGN_MIXED) || (pAd->CommonCfg.PhyMode == PHY_11AN_MIXED)
|| (pAd->CommonCfg.PhyMode == PHY_11AGN_MIXED) || (pAd->CommonCfg.PhyMode == PHY_11N_5G)
-#endif // DOT11_N_SUPPORT //
)
{
switch (pAd->CommonCfg.CountryRegionForABand & 0x7f)
@@ -506,9 +502,7 @@
else // must be SCAN_PASSIVE or SCAN_ACTIVE
{
if ((pAd->CommonCfg.PhyMode == PHY_11ABG_MIXED)
-#ifdef DOT11_N_SUPPORT
|| (pAd->CommonCfg.PhyMode == PHY_11ABGN_MIXED) || (pAd->CommonCfg.PhyMode == PHY_11AGN_MIXED)
-#endif // DOT11_N_SUPPORT //
)
{
if (pAd->MlmeAux.Channel > 14)
@@ -567,7 +561,6 @@
FrameLen += Tmp;
}
-#ifdef DOT11_N_SUPPORT
if (pAd->CommonCfg.PhyMode >= PHY_11ABGN_MIXED)
{
ULONG Tmp;
@@ -597,8 +590,6 @@
}
FrameLen += Tmp;
}
-#endif // DOT11_N_SUPPORT //
-
MiniportMMRequest(pAd, 0, pOutBuffer, FrameLen);
MlmeFreeMemory(pAd, pOutBuffer);
diff --git a/drivers/staging/rt2870/common/mlme.c b/drivers/staging/rt2870/common/mlme.c
index b8e9db5..a3d5924 100644
--- a/drivers/staging/rt2870/common/mlme.c
+++ b/drivers/staging/rt2870/common/mlme.c
@@ -50,9 +50,7 @@
UCHAR RALINK_OUI[] = {0x00, 0x0c, 0x43};
UCHAR BROADCOM_OUI[] = {0x00, 0x90, 0x4c};
UCHAR WPS_OUI[] = {0x00, 0x50, 0xf2, 0x04};
-#ifdef DOT11_N_SUPPORT
UCHAR PRE_N_HT_OUI[] = {0x00, 0x90, 0x4c};
-#endif // DOT11_N_SUPPORT //
UCHAR RateSwitchTable[] = {
// Item No. Mode Curr-MCS TrainUp TrainDown // Mode- Bit0: STBC, Bit1: Short GI, Bit4,5: Mode(0:CCK, 1:OFDM, 2:HT Mix, 3:HT GF)
@@ -128,7 +126,6 @@
0x07, 0x10, 7, 10, 13,
};
-#ifdef DOT11_N_SUPPORT
UCHAR RateSwitchTable11N1S[] = {
// Item No. Mode Curr-MCS TrainUp TrainDown // Mode- Bit0: STBC, Bit1: Short GI, Bit4,5: Mode(0:CCK, 1:OFDM, 2:HT Mix, 3:HT GF)
0x09, 0x00, 0, 0, 0, // Initial used item after association
@@ -293,7 +290,6 @@
0x0a, 0x20, 23, 8, 25,
0x0b, 0x22, 23, 8, 25,
};
-#endif // DOT11_N_SUPPORT //
PUCHAR ReasonString[] = {
/* 0 */ "Reserved",
@@ -340,11 +336,9 @@
UCHAR SsidIe = IE_SSID;
UCHAR SupRateIe = IE_SUPP_RATES;
UCHAR ExtRateIe = IE_EXT_SUPP_RATES;
-#ifdef DOT11_N_SUPPORT
UCHAR HtCapIe = IE_HT_CAP;
UCHAR AddHtInfoIe = IE_ADD_HT;
UCHAR NewExtChanIe = IE_SECONDARY_CH_OFFSET;
-#endif // DOT11_N_SUPPORT //
UCHAR ErpIe = IE_ERP;
UCHAR DsIe = IE_DS_PARM;
UCHAR TimIe = IE_TIM;
@@ -861,10 +855,8 @@
RT2870_WatchDog(pAd);
#endif // RT2870 //
-#ifdef DOT11_N_SUPPORT
// Need statistics after read counter. So put after NICUpdateRawCounters
ORIBATimerTimeout(pAd);
-#endif // DOT11_N_SUPPORT //
// if MGMT RING is full more than twice within 1 second, we consider there's
// a hardware problem stucking the TX path. In this case, try a hardware reset
@@ -1135,7 +1127,6 @@
SKIP_AUTO_SCAN_CONN:
-#ifdef DOT11_N_SUPPORT
if ((pAd->MacTab.Content[BSSID_WCID].TXBAbitmap !=0) && (pAd->MacTab.fAnyBASession == FALSE))
{
pAd->MacTab.fAnyBASession = TRUE;
@@ -1146,7 +1137,6 @@
pAd->MacTab.fAnyBASession = FALSE;
AsicUpdateProtect(pAd, pAd->MlmeAux.AddHtInfo.AddHtInfo2.OperaionMode, ALLN_SETPROTECT, FALSE, FALSE);
}
-#endif // DOT11_N_SUPPORT //
return;
}
@@ -1256,7 +1246,6 @@
if ((pAd->OpMode == OPMODE_STA) && ADHOC_ON(pAd))
{
-#ifdef DOT11_N_SUPPORT
if ((pAd->CommonCfg.PhyMode >= PHY_11ABGN_MIXED) &&
(pEntry->HTCapability.MCSSet[0] == 0xff) &&
((pEntry->HTCapability.MCSSet[1] == 0x00) || (pAd->Antenna.field.TxPath == 1)))
@@ -1286,11 +1275,8 @@
}
else
-#endif // DOT11_N_SUPPORT //
if ((pEntry->RateLen == 4)
-#ifdef DOT11_N_SUPPORT
&& (pEntry->HTCapability.MCSSet[0] == 0) && (pEntry->HTCapability.MCSSet[1] == 0)
-#endif // DOT11_N_SUPPORT //
)
{
*ppTable = RateSwitchTable11B;
@@ -1315,7 +1301,6 @@
break;
}
-#ifdef DOT11_N_SUPPORT
//if ((pAd->StaActive.SupRateLen + pAd->StaActive.ExtRateLen == 12) && (pAd->StaActive.SupportedPhyInfo.MCSSet[0] == 0xff) &&
// ((pAd->StaActive.SupportedPhyInfo.MCSSet[1] == 0x00) || (pAd->Antenna.field.TxPath == 1)))
if ((pEntry->RateLen == 12) && (pEntry->HTCapability.MCSSet[0] == 0xff) &&
@@ -1378,12 +1363,10 @@
break;
}
-#endif // DOT11_N_SUPPORT //
+
//else if ((pAd->StaActive.SupRateLen == 4) && (pAd->StaActive.ExtRateLen == 0) && (pAd->StaActive.SupportedPhyInfo.MCSSet[0] == 0) && (pAd->StaActive.SupportedPhyInfo.MCSSet[1] == 0))
if ((pEntry->RateLen == 4)
-#ifdef DOT11_N_SUPPORT
&& (pEntry->HTCapability.MCSSet[0] == 0) && (pEntry->HTCapability.MCSSet[1] == 0)
-#endif // DOT11_N_SUPPORT //
)
{// B only AP
*ppTable = RateSwitchTable11B;
@@ -1395,9 +1378,7 @@
//else if ((pAd->StaActive.SupRateLen + pAd->StaActive.ExtRateLen > 8) && (pAd->StaActive.SupportedPhyInfo.MCSSet[0] == 0) && (pAd->StaActive.SupportedPhyInfo.MCSSet[1] == 0))
if ((pEntry->RateLen > 8)
-#ifdef DOT11_N_SUPPORT
&& (pEntry->HTCapability.MCSSet[0] == 0) && (pEntry->HTCapability.MCSSet[1] == 0)
-#endif // DOT11_N_SUPPORT //
)
{// B/G mixed AP
*ppTable = RateSwitchTable11BG;
@@ -1409,9 +1390,7 @@
//else if ((pAd->StaActive.SupRateLen + pAd->StaActive.ExtRateLen == 8) && (pAd->StaActive.SupportedPhyInfo.MCSSet[0] == 0) && (pAd->StaActive.SupportedPhyInfo.MCSSet[1] == 0))
if ((pEntry->RateLen == 8)
-#ifdef DOT11_N_SUPPORT
&& (pEntry->HTCapability.MCSSet[0] == 0) && (pEntry->HTCapability.MCSSet[1] == 0)
-#endif // DOT11_N_SUPPORT //
)
{// G only AP
*ppTable = RateSwitchTable11G;
@@ -1420,15 +1399,11 @@
break;
}
-#ifdef DOT11_N_SUPPORT
-#endif // DOT11_N_SUPPORT //
IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
{
-#ifdef DOT11_N_SUPPORT
//else if ((pAd->StaActive.SupportedPhyInfo.MCSSet[0] == 0) && (pAd->StaActive.SupportedPhyInfo.MCSSet[1] == 0))
if ((pEntry->HTCapability.MCSSet[0] == 0) && (pEntry->HTCapability.MCSSet[1] == 0))
-#endif // DOT11_N_SUPPORT //
{ // Legacy mode
if (pAd->CommonCfg.MaxTxRate <= RATE_11)
{
@@ -1451,7 +1426,7 @@
}
break;
}
-#ifdef DOT11_N_SUPPORT
+
if (pAd->LatchRfRegs.Channel <= 14)
{
if (pAd->CommonCfg.TxStream == 1)
@@ -1486,7 +1461,7 @@
DBGPRINT_RAW(RT_DEBUG_ERROR,("DRS: unkown mode,default use 11N 2S AP \n"));
}
}
-#endif // DOT11_N_SUPPORT //
+
DBGPRINT_RAW(RT_DEBUG_ERROR,("DRS: unkown mode (SupRateLen=%d, ExtRateLen=%d, MCSSet[0]=0x%x, MCSSet[1]=0x%x)\n",
pAd->StaActive.SupRateLen, pAd->StaActive.ExtRateLen, pAd->StaActive.SupportedPhyInfo.MCSSet[0], pAd->StaActive.SupportedPhyInfo.MCSSet[1]));
}
@@ -1710,13 +1685,11 @@
{
UCHAR MaxMode = MODE_OFDM;
-#ifdef DOT11_N_SUPPORT
MaxMode = MODE_HTGREENFIELD;
if (pTxRate->STBC && (pAd->StaCfg.MaxHTPhyMode.field.STBC) && (pAd->Antenna.field.TxPath == 2))
pAd->StaCfg.HTPhyMode.field.STBC = STBC_USE;
else
-#endif // DOT11_N_SUPPORT //
pAd->StaCfg.HTPhyMode.field.STBC = STBC_NONE;
if (pTxRate->CurrMCS < MCS_AUTO)
@@ -1746,14 +1719,11 @@
if (pTxRate->Mode <= MaxMode)
pAd->StaCfg.HTPhyMode.field.MODE = pTxRate->Mode;
-#ifdef DOT11_N_SUPPORT
if (pTxRate->ShortGI && (pAd->StaCfg.MaxHTPhyMode.field.ShortGI))
pAd->StaCfg.HTPhyMode.field.ShortGI = GI_400;
else
-#endif // DOT11_N_SUPPORT //
pAd->StaCfg.HTPhyMode.field.ShortGI = GI_800;
-#ifdef DOT11_N_SUPPORT
// Reexam each bandwidth's SGI support.
if (pAd->StaCfg.HTPhyMode.field.ShortGI == GI_400)
{
@@ -1797,17 +1767,15 @@
{
AsicUpdateProtect(pAd, HT_RTSCTS_6M, ALLN_SETPROTECT, TRUE, (BOOLEAN)pAd->MlmeAux.AddHtInfo.AddHtInfo2.NonGfPresent);
}
-#endif // DOT11_N_SUPPORT //
pEntry->HTPhyMode.field.STBC = pAd->StaCfg.HTPhyMode.field.STBC;
pEntry->HTPhyMode.field.ShortGI = pAd->StaCfg.HTPhyMode.field.ShortGI;
pEntry->HTPhyMode.field.MCS = pAd->StaCfg.HTPhyMode.field.MCS;
pEntry->HTPhyMode.field.MODE = pAd->StaCfg.HTPhyMode.field.MODE;
-#ifdef DOT11_N_SUPPORT
+
if ((pAd->StaCfg.MaxHTPhyMode.field.MODE == MODE_HTGREENFIELD) &&
pAd->WIFItestbed.bGreenField)
pEntry->HTPhyMode.field.MODE = MODE_HTGREENFIELD;
-#endif // DOT11_N_SUPPORT //
}
pAd->LastTxRate = (USHORT)(pEntry->HTPhyMode.word);
@@ -1959,14 +1927,12 @@
pCurrTxRate = (PRTMP_TX_RATE_SWITCH) &pTable[(CurrRateIdx+1)*5];
-#ifdef DOT11_N_SUPPORT
if ((Rssi > -65) && (pCurrTxRate->Mode >= MODE_HTMIX))
{
TrainUp = (pCurrTxRate->TrainUp + (pCurrTxRate->TrainUp >> 1));
TrainDown = (pCurrTxRate->TrainDown + (pCurrTxRate->TrainDown >> 1));
}
else
-#endif // DOT11_N_SUPPORT //
{
TrainUp = pCurrTxRate->TrainUp;
TrainDown = pCurrTxRate->TrainDown;
@@ -2090,7 +2056,7 @@
RssiOffset = 8;
}
}
-#ifdef DOT11_N_SUPPORT
+
/*if (MCS15)*/
if ((pTable == RateSwitchTable11BGN3S) ||
(pTable == RateSwitchTable11N3S) ||
@@ -2157,7 +2123,6 @@
TxRateIdx = MCS0;
}
else
-#endif // DOT11_N_SUPPORT //
{// Legacy mode
if (MCS7 && (Rssi > -70))
TxRateIdx = MCS7;
@@ -2391,14 +2356,12 @@
pCurrTxRate = (PRTMP_TX_RATE_SWITCH) &pTable[(CurrRateIdx+1)*5];
-#ifdef DOT11_N_SUPPORT
if ((Rssi > -65) && (pCurrTxRate->Mode >= MODE_HTMIX))
{
TrainUp = (pCurrTxRate->TrainUp + (pCurrTxRate->TrainUp >> 1));
TrainDown = (pCurrTxRate->TrainDown + (pCurrTxRate->TrainDown >> 1));
}
else
-#endif // DOT11_N_SUPPORT //
{
TrainUp = pCurrTxRate->TrainUp;
TrainDown = pCurrTxRate->TrainDown;
@@ -2961,9 +2924,7 @@
{
case PHY_11BG_MIXED:
case PHY_11B:
-#ifdef DOT11_N_SUPPORT
case PHY_11BGN_MIXED:
-#endif // DOT11_N_SUPPORT //
pAd->CommonCfg.MlmeRate = RATE_1;
pAd->CommonCfg.MlmeTransmit.field.MODE = MODE_CCK;
pAd->CommonCfg.MlmeTransmit.field.MCS = RATE_1;
@@ -2976,22 +2937,18 @@
break;
case PHY_11G:
case PHY_11A:
-#ifdef DOT11_N_SUPPORT
case PHY_11AGN_MIXED:
case PHY_11GN_MIXED:
case PHY_11N_2_4G:
case PHY_11AN_MIXED:
case PHY_11N_5G:
-#endif // DOT11_N_SUPPORT //
pAd->CommonCfg.MlmeRate = RATE_6;
pAd->CommonCfg.RtsRate = RATE_6;
pAd->CommonCfg.MlmeTransmit.field.MODE = MODE_OFDM;
pAd->CommonCfg.MlmeTransmit.field.MCS = OfdmRateToRxwiMCS[pAd->CommonCfg.MlmeRate];
break;
case PHY_11ABG_MIXED:
-#ifdef DOT11_N_SUPPORT
case PHY_11ABGN_MIXED:
-#endif // DOT11_N_SUPPORT //
if (pAd->CommonCfg.Channel <= 14)
{
pAd->CommonCfg.MlmeRate = RATE_1;
@@ -3034,7 +2991,6 @@
pAd->CommonCfg.MlmeTransmit.word, pAd->MacTab.Content[BSSID_WCID].MinHTPhyMode.word ,pAd->MacTab.Content[BSSID_WCID].MaxHTPhyMode.word ,pAd->MacTab.Content[BSSID_WCID].HTPhyMode.word ));
}
-#ifdef DOT11_N_SUPPORT
/*
==========================================================================
Description:
@@ -3185,7 +3141,6 @@
pHtPhy->field.BW, pHtPhy->field.ShortGI, pHtPhy->field.MODE));
DBGPRINT(RT_DEBUG_TRACE,("MlmeUpdateHtTxRates<=== \n"));
}
-#endif // DOT11_N_SUPPORT //
// IRQL = DISPATCH_LEVEL
VOID MlmeRadioOff(
@@ -3230,7 +3185,6 @@
}
}
-#ifdef DOT11_N_SUPPORT
VOID BATableInit(
IN PRTMP_ADAPTER pAd,
IN BA_TABLE *Tab)
@@ -3250,7 +3204,6 @@
Tab->BAOriEntry[i].ORI_BA_Status = Originator_NONE;
}
}
-#endif // DOT11_N_SUPPORT //
/*! \brief search the BSS table by SSID
* \param p_tab pointer to the bss table
@@ -3360,7 +3313,6 @@
}
}
-#ifdef DOT11_N_SUPPORT
/*
========================================================================
Routine Description:
@@ -3392,7 +3344,6 @@
NdisReleaseSpinLock(&pAd->BATabLock);
}
}
-#endif // DOT11_N_SUPPORT //
/*! \brief
* \param
@@ -3509,7 +3460,7 @@
pBss->AddHtInfoLen = 0;
pBss->HtCapabilityLen = 0;
-#ifdef DOT11_N_SUPPORT
+
if (HtCapabilityLen> 0)
{
pBss->HtCapabilityLen = HtCapabilityLen;
@@ -3529,7 +3480,6 @@
}
}
}
-#endif // DOT11_N_SUPPORT //
BssCipherParse(pBss);
@@ -3720,7 +3670,7 @@
(SSID_EQUAL(Ssid, SsidLen, pInBss->Ssid, pInBss->SsidLen) || bIsHiddenApIncluded))
{
BSS_ENTRY *pOutBss = &OutTab->BssEntry[OutTab->BssNr];
-#ifdef DOT11_N_SUPPORT
+
// 2.4G/5G N only mode
if ((pInBss->HtCapabilityLen == 0) &&
((pAd->CommonCfg.PhyMode == PHY_11N_2_4G) || (pAd->CommonCfg.PhyMode == PHY_11N_5G)))
@@ -3728,7 +3678,6 @@
DBGPRINT(RT_DEBUG_TRACE,("STA is in N-only Mode, this AP don't have Ht capability in Beacon.\n"));
continue;
}
-#endif // DOT11_N_SUPPORT //
// New for WPA2
// Check the Authmode first
@@ -3801,7 +3750,6 @@
if (SsidLen == 0)
continue;
-#ifdef DOT11_N_SUPPORT
// If both station and AP use 40MHz, still need to check if the 40MHZ band's legality in my country region
// If this 40MHz wideband is not allowed in my country list, use bandwidth 20MHZ instead,
if ((pInBss->CentralChannel != pInBss->Channel) &&
@@ -3821,7 +3769,6 @@
}
}
}
-#endif // DOT11_N_SUPPORT //
// copy matching BSS from InTab to OutTab
NdisMoveMemory(pOutBss, pInBss, sizeof(BSS_ENTRY));
@@ -3832,8 +3779,6 @@
{
BSS_ENTRY *pOutBss = &OutTab->BssEntry[OutTab->BssNr];
-
-#ifdef DOT11_N_SUPPORT
// 2.4G/5G N only mode
if ((pInBss->HtCapabilityLen == 0) &&
((pAd->CommonCfg.PhyMode == PHY_11N_2_4G) || (pAd->CommonCfg.PhyMode == PHY_11N_5G)))
@@ -3841,7 +3786,6 @@
DBGPRINT(RT_DEBUG_TRACE,("STA is in N-only Mode, this AP don't have Ht capability in Beacon.\n"));
continue;
}
-#endif // DOT11_N_SUPPORT //
// New for WPA2
// Check the Authmode first
@@ -3897,7 +3841,6 @@
else if (pAd->StaCfg.WepStatus != pInBss->WepStatus)
continue;
-#ifdef DOT11_N_SUPPORT
// If both station and AP use 40MHz, still need to check if the 40MHZ band's legality in my country region
// If this 40MHz wideband is not allowed in my country list, use bandwidth 20MHZ instead,
if ((pInBss->CentralChannel != pInBss->Channel) &&
@@ -3910,7 +3853,6 @@
pAd->CommonCfg.RegTransmitSetting.field.BW = BW_40;
}
}
-#endif // DOT11_N_SUPPORT //
// copy matching BSS from InTab to OutTab
NdisMoveMemory(pOutBss, pInBss, sizeof(BSS_ENTRY));
@@ -5076,7 +5018,6 @@
}
}
break;
-#ifdef DOT11_N_SUPPORT
case 2: //HT-MIX
case 3: //HT-GF
{
@@ -5138,7 +5079,6 @@
}
}
break;
-#endif // DOT11_N_SUPPORT //
}
pNextTxRate = pCurrTxRate;
@@ -5180,7 +5120,6 @@
UCHAR i;
UINT32 MacReg = 0;
-#ifdef DOT11_N_SUPPORT
if (!(pAd->CommonCfg.bHTProtect) && (OperationMode != 8))
{
return;
@@ -5194,7 +5133,6 @@
SetMask = ALLN_SETPROTECT;
OperationMode = 8;
}
-#endif // DOT11_N_SUPPORT //
// Config ASIC RTS threshold register
RTMP_IO_READ32(pAd, TX_RTS_CFG, &MacReg);
@@ -5204,9 +5142,7 @@
#else
// If the user want disable RtsThreshold and enable Amsdu/Ralink-Aggregation, set the RtsThreshold as 4096
if ((
-#ifdef DOT11_N_SUPPORT
(pAd->CommonCfg.BACapability.field.AmsduEnable) ||
-#endif // DOT11_N_SUPPORT //
(pAd->CommonCfg.bAggregationCapable == TRUE))
&& pAd->CommonCfg.RtsThreshold == MAX_RTS_THRESHOLD)
{
@@ -5255,7 +5191,6 @@
Protect[1] = ProtCfg.word;
}
-#ifdef DOT11_N_SUPPORT
// Decide HT frame protection.
if ((SetMask & ALLN_SETPROTECT) != 0)
{
@@ -5386,7 +5321,6 @@
break;
}
}
-#endif // DOT11_N_SUPPORT //
offset = CCK_PROT_CFG;
for (i = 0;i < 6;i++)
@@ -6203,9 +6137,7 @@
// Data |= 0x60; // for performance issue not set the TXOP to 0
#endif
if (RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_DYNAMIC_BE_TXOP_ACTIVE)
-#ifdef DOT11_N_SUPPORT
&& (pAd->MacTab.fAnyStationMIMOPSDynamic == FALSE)
-#endif // DOT11_N_SUPPORT //
)
{
// For CWC test, change txop from 0x30 to 0x20 in TxBurst mode
@@ -6643,9 +6575,7 @@
{
// force using short SLOT time for FAE to demo performance when TxBurst is ON
if (((pAd->StaActive.SupportedPhyInfo.bHtEnable == FALSE) && (OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_WMM_INUSED)))
-#ifdef DOT11_N_SUPPORT
|| ((pAd->StaActive.SupportedPhyInfo.bHtEnable == TRUE) && (pAd->CommonCfg.BACapability.field.Policy == BA_NOTUSE))
-#endif // DOT11_N_SUPPORT //
)
{
// In this case, we will think it is doing Wi-Fi test
@@ -7185,7 +7115,6 @@
NdisMoveMemory(SupRate, NewRate, NewRateLen);
}
-#ifdef DOT11_N_SUPPORT
BOOLEAN RTMPCheckChannel(
IN PRTMP_ADAPTER pAd,
IN UCHAR CentralChannel,
@@ -7331,7 +7260,6 @@
COPY_AP_HTSETTINGS_FROM_BEACON(pAd, pHtCapability);
return TRUE;
}
-#endif // DOT11_N_SUPPORT //
/*
========================================================================
@@ -7364,10 +7292,8 @@
MinimumRate = RATE_1;
break;
case PHY_11BG_MIXED:
-#ifdef DOT11_N_SUPPORT
case PHY_11ABGN_MIXED:
case PHY_11BGN_MIXED:
-#endif // DOT11_N_SUPPORT //
if ((pAd->MlmeAux.SupRateLen == 4) &&
(pAd->MlmeAux.ExtRateLen == 0))
// B only AP
@@ -7381,13 +7307,11 @@
MinimumRate = RATE_6;
break;
case PHY_11A:
-#ifdef DOT11_N_SUPPORT
case PHY_11N_2_4G: // rt2860 need to check mlmerate for 802.11n
case PHY_11GN_MIXED:
case PHY_11AGN_MIXED:
case PHY_11AN_MIXED:
case PHY_11N_5G:
-#endif // DOT11_N_SUPPORT //
ProperMlmeRate = RATE_24;
MinimumRate = RATE_6;
break;
@@ -7982,13 +7906,11 @@
R66 = (UCHAR)(0x32 + (GET_LNA_GAIN(pAd)*5)/3);
RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R66, R66);
}
-#ifdef DOT11_N_SUPPORT
else
{
R66 = (UCHAR)(0x3A + (GET_LNA_GAIN(pAd)*5)/3);
RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R66, R66);
}
-#endif // DOT11_N_SUPPORT //
}
}
diff --git a/drivers/staging/rt2870/common/rtmp_init.c b/drivers/staging/rt2870/common/rtmp_init.c
index 27cbb47..e3b846e 100644
--- a/drivers/staging/rt2870/common/rtmp_init.c
+++ b/drivers/staging/rt2870/common/rtmp_init.c
@@ -1504,13 +1504,11 @@
if ((pAd->CommonCfg.PhyMode == PHY_11ABG_MIXED) ||
(pAd->CommonCfg.PhyMode == PHY_11A))
pAd->CommonCfg.PhyMode = PHY_11BG_MIXED;
-#ifdef DOT11_N_SUPPORT
else if ((pAd->CommonCfg.PhyMode == PHY_11ABGN_MIXED) ||
(pAd->CommonCfg.PhyMode == PHY_11AN_MIXED) ||
(pAd->CommonCfg.PhyMode == PHY_11AGN_MIXED) ||
(pAd->CommonCfg.PhyMode == PHY_11N_5G))
pAd->CommonCfg.PhyMode = PHY_11BGN_MIXED;
-#endif // DOT11_N_SUPPORT //
}
// Read TSSI reference and TSSI boundary for temperature compensation. This is ugly
@@ -1601,9 +1599,7 @@
TmpPhy = pAd->CommonCfg.PhyMode;
pAd->CommonCfg.PhyMode = 0xff;
RTMPSetPhyMode(pAd, TmpPhy);
-#ifdef DOT11_N_SUPPORT
SetCommonHT(pAd);
-#endif // DOT11_N_SUPPORT //
}
//
@@ -2275,10 +2271,8 @@
pEntry->DebugFIFOCount++;
-#ifdef DOT11_N_SUPPORT
if (StaFifo.field.TxBF) // 3*3
pEntry->TxBFCount++;
-#endif // DOT11_N_SUPPORT //
#ifdef UAPSD_AP_SUPPORT
UAPSD_SP_AUE_Handle(pAd, pEntry, StaFifo.field.TxSuccess);
@@ -2296,19 +2290,15 @@
SendRefreshBAR(pAd, pEntry);
pEntry->NoBADataCountDown = 64;
#else
-#ifdef DOT11_N_SUPPORT
pEntry->NoBADataCountDown = 64;
-#endif // DOT11_N_SUPPORT //
if(pEntry->PsMode == PWR_ACTIVE)
{
-#ifdef DOT11_N_SUPPORT
int tid;
for (tid=0; tid<NUM_OF_TID; tid++)
{
BAOriSessionTearDown(pAd, pEntry->Aid, tid, FALSE, FALSE);
}
-#endif // DOT11_N_SUPPORT //
// Update the continuous transmission counter except PS mode
pEntry->ContinueTxFailCnt++;
@@ -2327,7 +2317,6 @@
}
else
{
-#ifdef DOT11_N_SUPPORT
if ((pEntry->PsMode != PWR_SAVE) && (pEntry->NoBADataCountDown > 0))
{
pEntry->NoBADataCountDown--;
@@ -2336,7 +2325,7 @@
DBGPRINT(RT_DEBUG_TRACE, ("@\n"));
}
}
-#endif // DOT11_N_SUPPORT //
+
pEntry->FIFOCount = 0;
pEntry->OneSecTxNoRetryOkCount++;
// update NoDataIdleCount when sucessful send packet to STA.
@@ -3191,7 +3180,6 @@
NdisZeroMemory(&pAd->BeaconTxWI, sizeof(pAd->BeaconTxWI));
-#ifdef DOT11_N_SUPPORT
NdisZeroMemory(&pAd->CommonCfg.HtCapability, sizeof(pAd->CommonCfg.HtCapability));
pAd->HTCEnable = FALSE;
pAd->bBroadComHT = FALSE;
@@ -3217,7 +3205,6 @@
pAd->CommonCfg.TxBASize = 7;
pAd->CommonCfg.REGBACapability.word = pAd->CommonCfg.BACapability.word;
-#endif // DOT11_N_SUPPORT //
//pAd->CommonCfg.HTPhyMode.field.BW = BW_20;
//pAd->CommonCfg.HTPhyMode.field.MCS = MCS_AUTO;
diff --git a/drivers/staging/rt2870/common/spectrum.c b/drivers/staging/rt2870/common/spectrum.c
index f2e0a8b..c2a9443 100644
--- a/drivers/staging/rt2870/common/spectrum.c
+++ b/drivers/staging/rt2870/common/spectrum.c
@@ -1068,9 +1068,9 @@
{
// start DFS procedure
pAd->CommonCfg.Channel = Channel;
-#ifdef DOT11_N_SUPPORT
+
N_ChannelCheck(pAd);
-#endif // DOT11_N_SUPPORT //
+
pAd->CommonCfg.RadarDetect.RDMode = RD_SWITCHING_MODE;
pAd->CommonCfg.RadarDetect.CSCount = 0;
}
diff --git a/drivers/staging/rt2870/oid.h b/drivers/staging/rt2870/oid.h
index cdd9c19..21c7278 100644
--- a/drivers/staging/rt2870/oid.h
+++ b/drivers/staging/rt2870/oid.h
@@ -712,7 +712,6 @@
PHY_11A,
PHY_11ABG_MIXED,
PHY_11G,
-#ifdef DOT11_N_SUPPORT
PHY_11ABGN_MIXED, // both band 5
PHY_11N_2_4G, // 11n-only with 2.4G band 6
PHY_11GN_MIXED, // 2.4G band 7
@@ -720,7 +719,6 @@
PHY_11BGN_MIXED, // if check 802.11b. 9
PHY_11AGN_MIXED, // if check 802.11b. 10
PHY_11N_5G, // 11n-only with 5G band 11
-#endif // DOT11_N_SUPPORT //
} RT_802_11_PHY_MODE;
// put all proprietery for-query objects here to reduce # of Query_OID
diff --git a/drivers/staging/rt2870/rt_linux.c b/drivers/staging/rt2870/rt_linux.c
index fb8f604..6c39ebb 100644
--- a/drivers/staging/rt2870/rt_linux.c
+++ b/drivers/staging/rt2870/rt_linux.c
@@ -983,13 +983,11 @@
ph->noise.len = 4;
ph->noise.data = 0;
-#ifdef DOT11_N_SUPPORT
if (pRxBlk->pRxWI->PHYMODE >= MODE_HTMIX)
{
rate_index = 16 + ((UCHAR)pRxBlk->pRxWI->BW *16) + ((UCHAR)pRxBlk->pRxWI->ShortGI *32) + ((UCHAR)pRxBlk->pRxWI->MCS);
}
else
-#endif // DOT11_N_SUPPORT //
if (pRxBlk->pRxWI->PHYMODE == MODE_OFDM)
rate_index = (UCHAR)(pRxBlk->pRxWI->MCS) + 4;
else
diff --git a/drivers/staging/rt2870/rt_main_dev.c b/drivers/staging/rt2870/rt_main_dev.c
index 474c3ad..15dc986 100644
--- a/drivers/staging/rt2870/rt_main_dev.c
+++ b/drivers/staging/rt2870/rt_main_dev.c
@@ -54,10 +54,8 @@
/*---------------------------------------------------------------------*/
/* Prototypes of Functions Used */
/*---------------------------------------------------------------------*/
-#ifdef DOT11_N_SUPPORT
extern BOOLEAN ba_reordering_resource_init(PRTMP_ADAPTER pAd, int num);
extern void ba_reordering_resource_release(PRTMP_ADAPTER pAd);
-#endif // DOT11_N_SUPPORT //
extern NDIS_STATUS NICLoadRateSwitchingParams(IN PRTMP_ADAPTER pAd);
@@ -323,10 +321,8 @@
RTMP_CLEAR_FLAG(pAd, fRTMP_ADAPTER_HALT_IN_PROGRESS);
-#ifdef DOT11_N_SUPPORT
// Free BA reorder resource
ba_reordering_resource_release(pAd);
-#endif // DOT11_N_SUPPORT //
RTMP_CLEAR_FLAG(pAd, fRTMP_ADAPTER_START_UP);
@@ -341,10 +337,8 @@
NDIS_STATUS Status;
UINT32 MacCsr0 = 0;
-#ifdef DOT11_N_SUPPORT
// Allocate BA Reordering memory
ba_reordering_resource_init(pAd, MAX_REORDERING_MPDU_NUM);
-#endif // DOT11_N_SUPPORT //
// Make sure MAC gets ready.
index = 0;
@@ -454,7 +448,6 @@
//Init Ba Capability parameters.
// RT28XX_BA_INIT(pAd);
-#ifdef DOT11_N_SUPPORT
pAd->CommonCfg.DesiredHtPhy.MpduDensity = (UCHAR)pAd->CommonCfg.BACapability.field.MpduDensity;
pAd->CommonCfg.DesiredHtPhy.AmsduEnable = (USHORT)pAd->CommonCfg.BACapability.field.AmsduEnable;
pAd->CommonCfg.DesiredHtPhy.AmsduSize = (USHORT)pAd->CommonCfg.BACapability.field.AmsduSize;
@@ -463,7 +456,6 @@
pAd->CommonCfg.HtCapability.HtCapInfo.MimoPs = (USHORT)pAd->CommonCfg.BACapability.field.MMPSmode;
pAd->CommonCfg.HtCapability.HtCapInfo.AMsduSize = (USHORT)pAd->CommonCfg.BACapability.field.AmsduSize;
pAd->CommonCfg.HtCapability.HtCapParm.MpduDensity = (UCHAR)pAd->CommonCfg.BACapability.field.MpduDensity;
-#endif // DOT11_N_SUPPORT //
// after reading Registry, we now know if in AP mode or STA mode
@@ -485,9 +477,7 @@
TmpPhy = pAd->CommonCfg.PhyMode;
pAd->CommonCfg.PhyMode = 0xff;
RTMPSetPhyMode(pAd, TmpPhy);
-#ifdef DOT11_N_SUPPORT
SetCommonHT(pAd);
-#endif // DOT11_N_SUPPORT //
// No valid channels.
if (pAd->ChannelListNum == 0)
@@ -496,11 +486,9 @@
goto err4;
}
-#ifdef DOT11_N_SUPPORT
printk("MCS Set = %02x %02x %02x %02x %02x\n", pAd->CommonCfg.HtCapability.MCSSet[0],
pAd->CommonCfg.HtCapability.MCSSet[1], pAd->CommonCfg.HtCapability.MCSSet[2],
pAd->CommonCfg.HtCapability.MCSSet[3], pAd->CommonCfg.HtCapability.MCSSet[4]);
-#endif // DOT11_N_SUPPORT //
#ifdef RT2870
//Init RT30xx RFRegisters after read RFIC type from EEPROM
@@ -580,10 +568,7 @@
RTMPFreeTxRxRingMemory(pAd);
// RTMPFreeAdapter(pAd);
err1:
-
-#ifdef DOT11_N_SUPPORT
os_free_mem(pAd, pAd->mpdu_blk_pool.mem); // free BA pool
-#endif // DOT11_N_SUPPORT //
RT28XX_IRQ_RELEASE(net_dev);
// shall not set ml_priv to NULL here because the ml_priv didn't been free yet.
diff --git a/drivers/staging/rt2870/rt_profile.c b/drivers/staging/rt2870/rt_profile.c
index 99e2364..58aa37a 100644
--- a/drivers/staging/rt2870/rt_profile.c
+++ b/drivers/staging/rt2870/rt_profile.c
@@ -27,12 +27,10 @@
#include "rt_config.h"
-#ifdef DOT11_N_SUPPORT
static void HTParametersHook(
IN PRTMP_ADAPTER pAd,
IN CHAR *pValueStr,
IN CHAR *pInput);
-#endif // DOT11_N_SUPPORT //
#define ETH_MAC_ADDR_STR_LEN 17 // in format of xx:xx:xx:xx:xx:xx
@@ -1009,9 +1007,7 @@
{
int value = 0, maxPhyMode = PHY_11G;
-#ifdef DOT11_N_SUPPORT
maxPhyMode = PHY_11N_5G;
-#endif // DOT11_N_SUPPORT //
value = simple_strtol(tmpbuf, 0, 10);
@@ -1399,9 +1395,7 @@
DBGPRINT(RT_DEBUG_TRACE, "HSCounter=%d\n", pAd->CommonCfg.bEnableHSCounter);
}*/
-#ifdef DOT11_N_SUPPORT
HTParametersHook(pAd, tmpbuf, buffer);
-#endif // DOT11_N_SUPPORT //
IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
{
@@ -1517,7 +1511,6 @@
return (NDIS_STATUS_SUCCESS);
}
-#ifdef DOT11_N_SUPPORT
static void HTParametersHook(
IN PRTMP_ADAPTER pAd,
IN CHAR *pValueStr,
@@ -1925,5 +1918,3 @@
}
}
-#endif // DOT11_N_SUPPORT //
-
diff --git a/drivers/staging/rt2870/rtmp.h b/drivers/staging/rt2870/rtmp.h
index 7bb226f..a51aa8b 100644
--- a/drivers/staging/rt2870/rtmp.h
+++ b/drivers/staging/rt2870/rtmp.h
@@ -234,11 +234,9 @@
extern UCHAR SupRateIe;
extern UCHAR ExtRateIe;
-#ifdef DOT11_N_SUPPORT
extern UCHAR HtCapIe;
extern UCHAR AddHtInfoIe;
extern UCHAR NewExtChanIe;
-#endif // DOT11_N_SUPPORT //
extern UCHAR ErpIe;
extern UCHAR DsIe;
@@ -263,7 +261,6 @@
extern UCHAR RateSwitchTable11G[];
extern UCHAR RateSwitchTable11BG[];
-#ifdef DOT11_N_SUPPORT
extern UCHAR RateSwitchTable11BGN1S[];
extern UCHAR RateSwitchTable11BGN2S[];
extern UCHAR RateSwitchTable11BGN2SForABand[];
@@ -272,11 +269,9 @@
extern UCHAR RateSwitchTable11N2SForABand[];
extern UCHAR PRE_N_HT_OUI[];
-#endif // DOT11_N_SUPPORT //
#define MAXSEQ (0xFFF)
-#ifdef DOT11_N_SUPPORT
struct reordering_mpdu
{
struct reordering_mpdu *next;
@@ -297,7 +292,6 @@
NDIS_SPIN_LOCK lock;
struct reordering_list freelist;
};
-#endif // DOT11_N_SUPPORT //
typedef struct _RSSI_SAMPLE {
CHAR LastRssi0; // last received RSSI
@@ -438,7 +432,6 @@
} \
}
-#ifdef DOT11_N_SUPPORT
// StaActive.SupportedHtPhy.MCSSet is copied from AP beacon. Don't need to update here.
#define COPY_HTSETTINGS_FROM_MLME_AUX_TO_ACTIVE_CFG(_pAd) \
{ \
@@ -462,7 +455,6 @@
_pAd->MacTab.Content[BSSID_WCID].MmpsMode= (UCHAR)(_pHtCapability->HtCapInfo.MimoPs); \
_pAd->MacTab.Content[BSSID_WCID].MaxRAmpduFactor = (UCHAR)(_pHtCapability->HtCapParm.MaxRAmpduFactor); \
}
-#endif // DOT11_N_SUPPORT //
//
// BBP & RF are using indirect access. Before write any value into it.
@@ -1290,7 +1282,6 @@
Originator_Done
} ORI_BLOCKACK_STATUS, *PORI_BLOCKACK_STATUS;
-#ifdef DOT11_N_SUPPORT
typedef struct _BA_ORI_ENTRY{
UCHAR Wcid;
UCHAR TID;
@@ -1376,7 +1367,6 @@
} field;
UINT32 word;
} BACAP_STRUC, *PBACAP_STRUC;
-#endif // DOT11_N_SUPPORT //
//This structure is for all 802.11n card InterOptibilityTest action. Reset all Num every n second. (Details see MLMEPeriodic)
typedef struct _IOT_STRUC {
@@ -1666,10 +1656,9 @@
ULONG TxPowerPercentage; // 0~100 %
ULONG TxPowerDefault; // keep for TxPowerPercentage
-#ifdef DOT11_N_SUPPORT
BACAP_STRUC BACapability; // NO USE = 0XFF ; IMMED_BA =1 ; DELAY_BA=0
BACAP_STRUC REGBACapability; // NO USE = 0XFF ; IMMED_BA =1 ; DELAY_BA=0
-#endif // DOT11_N_SUPPORT //
+
IOT_STRUC IOTestParm; // 802.11n InterOpbility Test Parameter;
ULONG TxPreamble; // Rt802_11PreambleLong, Rt802_11PreambleShort, Rt802_11PreambleAuto
BOOLEAN bUseZeroToDisableFragment; // Microsoft use 0 as disable
@@ -1681,9 +1670,8 @@
BOOLEAN bIEEE80211H; // 1: enable IEEE802.11h spec.
ULONG DisableOLBCDetect; // 0: enable OLBC detect; 1 disable OLBC detect
-#ifdef DOT11_N_SUPPORT
BOOLEAN bRdg;
-#endif // DOT11_N_SUPPORT //
+
BOOLEAN bWmmCapable; // 0:disable WMM, 1:enable WMM
QOS_CAPABILITY_PARM APQosCapability; // QOS capability of the current associated AP
EDCA_PARM APEdcaParm; // EDCA parameters of the current associated AP
@@ -1702,7 +1690,6 @@
// IEEE802.11H--DFS.
RADAR_DETECT_STRUCT RadarDetect;
-#ifdef DOT11_N_SUPPORT
// HT
UCHAR BASize; // USer desired BAWindowSize. Should not exceed our max capability
//RT_HT_CAPABILITY SupportedHtPhy;
@@ -1723,7 +1710,6 @@
ULONG LastRcvBSSWidthTriggerEventsTime;
UCHAR TxBASize;
-#endif // DOT11_N_SUPPORT //
// Enable wireless event
BOOLEAN bWirelessEvent;
@@ -2069,14 +2055,11 @@
UINT32 StaConnectTime; // the live time of this station since associated with AP
-
-#ifdef DOT11_N_SUPPORT
BOOLEAN bSendBAR;
USHORT NoBADataCountDown;
UINT32 CachedBuf[16]; // UINT (4 bytes) for alignment
UINT TxBFCount; // 3*3
-#endif // DOT11_N_SUPPORT //
UINT FIFOCount;
UINT DebugFIFOCount;
UINT DebugTxCount;
@@ -2114,10 +2097,8 @@
// see fOP_STATUS_xxx in RTMP_DEF.C for detail bit definition. fCLIENT_STATUS_AMSDU_INUSED
ULONG ClientStatusFlags;
- // TODO: Shall we move that to DOT11_N_SUPPORT???
HTTRANSMIT_SETTING HTPhyMode, MaxHTPhyMode, MinHTPhyMode;// For transmit phy setting in TXWI.
-#ifdef DOT11_N_SUPPORT
// HT EWC MIMO-N used parameters
USHORT RXBAbitmap; // fill to on-chip RXWI_BA_BITMASK in 8.1.3RX attribute entry format
USHORT TXBAbitmap; // This bitmap as originator, only keep in software used to mark AMPDU bit in TXWI
@@ -2134,7 +2115,6 @@
UCHAR MmpsMode; // MIMO power save more.
HT_CAPABILITY_IE HTCapability;
-#endif // DOT11_N_SUPPORT //
BOOLEAN bAutoTxRateSwitch;
@@ -2163,16 +2143,13 @@
BOOLEAN fAnyStationBadAtheros; // Check if any Station is atheros 802.11n Chip. We need to use RTS/CTS with Atheros 802,.11n chip.
BOOLEAN fAnyTxOPForceDisable; // Check if it is necessary to disable BE TxOP
BOOLEAN fAllStationAsRalink; // Check if all stations are ralink-chipset
-#ifdef DOT11_N_SUPPORT
BOOLEAN fAnyStationIsLegacy; // Check if I use legacy rate to transmit to my BSS Station/
BOOLEAN fAnyStationNonGF; // Check if any Station can't support GF.
BOOLEAN fAnyStation20Only; // Check if any Station can't support GF.
BOOLEAN fAnyStationMIMOPSDynamic; // Check if any Station is MIMO Dynamic
BOOLEAN fAnyBASession; // Check if there is BA session. Force turn on RTS/CTS
-#endif // DOT11_N_SUPPORT //
} MAC_TABLE, *PMAC_TABLE;
-#ifdef DOT11_N_SUPPORT
#define IS_HT_STA(_pMacEntry) \
(_pMacEntry->MaxHTPhyMode.field.MODE >= MODE_HTMIX)
@@ -2181,7 +2158,6 @@
#define PEER_IS_HT_RATE(_pMacEntry) \
(_pMacEntry->HTPhyMode.field.MODE >= MODE_HTMIX)
-#endif // DOT11_N_SUPPORT //
typedef struct _WDS_ENTRY {
BOOLEAN Valid;
@@ -2628,9 +2604,8 @@
MAC_TABLE MacTab; // ASIC on-chip WCID entry table. At TX, ASIC always use key according to this on-chip table.
NDIS_SPIN_LOCK MacTabLock;
-#ifdef DOT11_N_SUPPORT
BA_TABLE BATable;
-#endif // DOT11_N_SUPPORT //
+
NDIS_SPIN_LOCK BATabLock;
RALINK_TIMER_STRUCT RECBATimer;
@@ -2729,9 +2704,7 @@
struct wificonf WIFItestbed;
-#ifdef DOT11_N_SUPPORT
struct reordering_mpdu_pool mpdu_blk_pool;
-#endif // DOT11_N_SUPPORT //
ULONG OneSecondnonBEpackets; // record non BE packets per second
@@ -3173,7 +3146,6 @@
IN PRTMP_ADAPTER pAd,
IN MLME_QUEUE_ELEM *Elem);
-#ifdef DOT11_N_SUPPORT
VOID PeerAddBAReqAction(
IN PRTMP_ADAPTER pAd,
IN MLME_QUEUE_ELEM *Elem);
@@ -3189,7 +3161,6 @@
VOID PeerBAAction(
IN PRTMP_ADAPTER pAd,
IN MLME_QUEUE_ELEM *Elem);
-#endif // DOT11_N_SUPPORT //
VOID SendPSMPAction(
IN PRTMP_ADAPTER pAd,
@@ -3212,17 +3183,14 @@
IN PRTMP_ADAPTER pAd,
IN MLME_QUEUE_ELEM *Elem);
-#ifdef DOT11_N_SUPPORT
VOID PeerHTAction(
IN PRTMP_ADAPTER pAd,
IN MLME_QUEUE_ELEM *Elem);
-#endif // DOT11_N_SUPPORT //
VOID PeerQOSAction(
IN PRTMP_ADAPTER pAd,
IN MLME_QUEUE_ELEM *Elem);
-#ifdef DOT11_N_SUPPORT
VOID RECBATimerTimeout(
IN PVOID SystemSpecific1,
IN PVOID FunctionContext,
@@ -3235,7 +3203,6 @@
VOID SendRefreshBAR(
IN PRTMP_ADAPTER pAd,
IN MAC_TABLE_ENTRY *pEntry);
-#endif // DOT11_N_SUPPORT //
VOID ActHeaderInit(
IN PRTMP_ADAPTER pAd,
@@ -3268,7 +3235,6 @@
IN USHORT Datasize,
IN UINT CurRxIndex);
-#ifdef DOT11_N_SUPPORT
BOOLEAN CntlEnqueueForRecv(
IN PRTMP_ADAPTER pAd,
IN ULONG Wcid,
@@ -3277,7 +3243,6 @@
VOID BaAutoManSwitch(
IN PRTMP_ADAPTER pAd);
-#endif // DOT11_N_SUPPORT //
VOID HTIOTCheck(
IN PRTMP_ADAPTER pAd,
@@ -3770,11 +3735,9 @@
VOID BssTableInit(
IN BSS_TABLE *Tab);
-#ifdef DOT11_N_SUPPORT
VOID BATableInit(
IN PRTMP_ADAPTER pAd,
IN BA_TABLE *Tab);
-#endif // DOT11_N_SUPPORT //
ULONG BssTableSearch(
IN BSS_TABLE *Tab,
@@ -3800,7 +3763,6 @@
IN PUCHAR pBssid,
IN UCHAR Channel);
-#ifdef DOT11_N_SUPPORT
VOID BATableDeleteORIEntry(
IN OUT PRTMP_ADAPTER pAd,
IN BA_ORI_ENTRY *pBAORIEntry);
@@ -3821,7 +3783,6 @@
IN UCHAR TID,
IN UCHAR WCID,
IN BOOLEAN ALL);
-#endif // DOT11_N_SUPPORT //
VOID BssEntrySet(
IN PRTMP_ADAPTER pAd,
@@ -3883,7 +3844,6 @@
IN USHORT LengthVIE,
IN PNDIS_802_11_VARIABLE_IEs pVIE);
-#ifdef DOT11_N_SUPPORT
VOID BATableInsertEntry(
IN PRTMP_ADAPTER pAd,
IN USHORT Aid,
@@ -3893,7 +3853,6 @@
IN UCHAR BAWinSize,
IN UCHAR OriginatorStatus,
IN BOOLEAN IsRecipient);
-#endif // DOT11_N_SUPPORT //
VOID BssTableSsidSort(
IN PRTMP_ADAPTER pAd,
@@ -4632,11 +4591,9 @@
IN BOOLEAN bLinkUp,
IN UCHAR apidx);
-#ifdef DOT11_N_SUPPORT
VOID MlmeUpdateHtTxRates(
IN PRTMP_ADAPTER pAd,
IN UCHAR apidx);
-#endif // DOT11_N_SUPPORT //
VOID RTMPCheckRates(
IN PRTMP_ADAPTER pAd,
@@ -4899,7 +4856,6 @@
IN PNDIS_802_11_KEY pKey,
IN UCHAR CipherAlg);
-#ifdef DOT11_N_SUPPORT
VOID RTMPSetHT(
IN PRTMP_ADAPTER pAd,
IN OID_SET_HT_PHYMODE *pHTPhyMode);
@@ -4907,7 +4863,6 @@
VOID RTMPSetIndividualHT(
IN PRTMP_ADAPTER pAd,
IN UCHAR apidx);
-#endif // DOT11_N_SUPPORT //
VOID RTMPSendWirelessEvent(
IN PRTMP_ADAPTER pAd,
@@ -5568,7 +5523,6 @@
OUT PUCHAR pData,
IN UCHAR FromWhichBSSID);
-#ifdef DOT11_N_SUPPORT
void ba_flush_reordering_timeout_mpdus(
IN PRTMP_ADAPTER pAd,
IN PBA_REC_ENTRY pBAEntry,
@@ -5586,7 +5540,6 @@
VOID BASessionTearDownALL(
IN OUT PRTMP_ADAPTER pAd,
IN UCHAR Wcid);
-#endif // DOT11_N_SUPPORT //
BOOLEAN OS_Need_Clone_Packet(void);
@@ -5734,7 +5687,6 @@
IN PRTMP_ADAPTER pAd,
IN PUCHAR arg);
-#ifdef DOT11_N_SUPPORT
INT Set_BASetup_Proc(
IN PRTMP_ADAPTER pAd,
IN PUCHAR arg);
@@ -5835,19 +5787,16 @@
INT Set_HtTxBASize_Proc(
IN PRTMP_ADAPTER pAd,
IN PUCHAR arg);
-#endif // DOT11_N_SUPPORT //
//Dls , kathy
VOID RTMPSendDLSTearDownFrame(
IN PRTMP_ADAPTER pAd,
IN PUCHAR pDA);
-#ifdef DOT11_N_SUPPORT
//Block ACK
VOID QueryBATABLE(
IN PRTMP_ADAPTER pAd,
OUT PQUERYBA_TABLE pBAT);
-#endif // DOT11_N_SUPPORT //
INT WpaCheckEapCode(
IN PRTMP_ADAPTER pAd,
@@ -5865,15 +5814,12 @@
int wext_notify_event_assoc(
IN RTMP_ADAPTER *pAd);
-#ifdef DOT11_N_SUPPORT
VOID Handle_BSS_Width_Trigger_Events(
IN PRTMP_ADAPTER pAd);
void build_ext_channel_switch_ie(
IN PRTMP_ADAPTER pAd,
IN HT_EXT_CHANNEL_SWITCH_ANNOUNCEMENT_IE *pIE);
-#endif // DOT11_N_SUPPORT //
-
BOOLEAN APRxDoneInterruptHandle(
IN PRTMP_ADAPTER pAd);
@@ -5882,7 +5828,6 @@
IN PRTMP_ADAPTER pAd,
IN BOOLEAN argc);
-#ifdef DOT11_N_SUPPORT
// AMPDU packet indication
VOID Indicate_AMPDU_Packet(
IN PRTMP_ADAPTER pAd,
@@ -5894,7 +5839,6 @@
IN PRTMP_ADAPTER pAd,
IN RX_BLK *pRxBlk,
IN UCHAR FromWhichBSSID);
-#endif // DOT11_N_SUPPORT //
// Normal legacy Rx packet indication
VOID Indicate_Legacy_Packet(
@@ -6142,13 +6086,11 @@
case MODE_OFDM:
return "OFDM";
-#ifdef DOT11_N_SUPPORT
case MODE_HTMIX:
return "HTMIX";
case MODE_HTGREENFIELD:
return "GREEN";
-#endif // DOT11_N_SUPPORT //
default:
return "N/A";
}
@@ -6165,10 +6107,8 @@
case BW_20:
return "20M";
-#ifdef DOT11_N_SUPPORT
case BW_40:
return "40M";
-#endif // DOT11_N_SUPPORT //
default:
return "N/A";
}
diff --git a/drivers/staging/rt2870/rtmp_def.h b/drivers/staging/rt2870/rtmp_def.h
index e09a96c..75aa4c6 100644
--- a/drivers/staging/rt2870/rtmp_def.h
+++ b/drivers/staging/rt2870/rtmp_def.h
@@ -1010,10 +1010,9 @@
// Preamble MODE in TxD
#define MODE_CCK 0
#define MODE_OFDM 1
-#ifdef DOT11_N_SUPPORT
#define MODE_HTMIX 2
#define MODE_HTGREENFIELD 3
-#endif // DOT11_N_SUPPORT //
+
// MCS for CCK. BW.SGI.STBC are reserved
#define MCS_LONGP_RATE_1 0 // long preamble CCK 1Mbps
#define MCS_LONGP_RATE_2 1 // long preamble CCK 1Mbps
@@ -1060,12 +1059,10 @@
#define MCS_32 32
#define MCS_AUTO 33
-#ifdef DOT11_N_SUPPORT
// OID_HTPHYMODE
// MODE
#define HTMODE_MM 0
#define HTMODE_GF 1
-#endif // DOT11_N_SUPPORT //
// Fixed Tx MODE - HT, CCK or OFDM
#define FIXED_TXMODE_HT 0
@@ -1077,15 +1074,12 @@
#define BW_BOTH BAND_WIDTH_BOTH
#define BW_10 BAND_WIDTH_10 // 802.11j has 10MHz. This definition is for internal usage. doesn't fill in the IE or other field.
-#ifdef DOT11_N_SUPPORT
// SHORTGI
#define GI_400 GAP_INTERVAL_400 // only support in HT mode
#define GI_BOTH GAP_INTERVAL_BOTH
-#endif // DOT11_N_SUPPORT //
#define GI_800 GAP_INTERVAL_800
// STBC
#define STBC_NONE 0
-#ifdef DOT11_N_SUPPORT
#define STBC_USE 1 // limited use in rt2860b phy
#define RXSTBC_ONE 1 // rx support of one spatial stream
#define RXSTBC_TWO 2 // rx support of 1 and 2 spatial stream
@@ -1107,8 +1101,6 @@
#define AMSDU_0 0
#define AMSDU_1 1
-#endif // DOT11_N_SUPPORT //
-
// MCS use 7 bits
#define TXRATEMIMO 0x80
#define TXRATEMCS 0x7F
diff --git a/drivers/staging/rt2870/sta/assoc.c b/drivers/staging/rt2870/sta/assoc.c
index 3612bf0..1523f6c 100644
--- a/drivers/staging/rt2870/sta/assoc.c
+++ b/drivers/staging/rt2870/sta/assoc.c
@@ -341,7 +341,6 @@
FrameLen += tmp;
}
-#ifdef DOT11_N_SUPPORT
// HT
if ((pAd->MlmeAux.HtCapabilityLen > 0) && (pAd->CommonCfg.PhyMode >= PHY_11ABGN_MIXED))
{
@@ -368,7 +367,6 @@
}
FrameLen += TmpLen;
}
-#endif // DOT11_N_SUPPORT //
// add Ralink proprietary IE to inform AP this STA is going to use AGGREGATION or PIGGY-BACK+AGGREGATION
// Case I: (Aggregation + Piggy-Back)
@@ -676,7 +674,6 @@
FrameLen += tmp;
}
-#ifdef DOT11_N_SUPPORT
// HT
if ((pAd->MlmeAux.HtCapabilityLen > 0) && (pAd->CommonCfg.PhyMode >= PHY_11ABGN_MIXED))
{
@@ -703,7 +700,6 @@
}
FrameLen += TmpLen;
}
-#endif // DOT11_N_SUPPORT //
// add Ralink proprietary IE to inform AP this STA is going to use AGGREGATION or PIGGY-BACK+AGGREGATION
// Case I: (Aggregation + Piggy-Back)
@@ -882,9 +878,7 @@
if(MAC_ADDR_EQUAL(Addr2, pAd->MlmeAux.Bssid))
{
DBGPRINT(RT_DEBUG_TRACE, ("PeerAssocRspAction():ASSOC - receive ASSOC_RSP to me (status=%d)\n", Status));
-#ifdef DOT11_N_SUPPORT
DBGPRINT(RT_DEBUG_TRACE, ("PeerAssocRspAction():MacTable [%d].AMsduSize = %d. ClientStatusFlags = 0x%lx \n",Elem->Wcid, pAd->MacTab.Content[BSSID_WCID].AMsduSize, pAd->MacTab.Content[BSSID_WCID].ClientStatusFlags));
-#endif // DOT11_N_SUPPORT //
RTMPCancelTimer(&pAd->MlmeAux.AssocTimer, &TimerCancelled);
if(Status == MLME_SUCCESS)
{
@@ -1035,7 +1029,7 @@
COPY_MAC_ADDR(pAd->MlmeAux.Bssid, pAddr2);
pAd->MlmeAux.Aid = Aid;
pAd->MlmeAux.CapabilityInfo = CapabilityInfo & SUPPORTED_CAPABILITY_INFO;
-#ifdef DOT11_N_SUPPORT
+
// Some HT AP might lost WMM IE. We add WMM ourselves. beacuase HT requires QoS on.
if ((HtCapabilityLen > 0) && (pEdcaParm->bValid == FALSE))
{
@@ -1061,7 +1055,6 @@
pEdcaParm->Txop[3] = 48;
}
-#endif // DOT11_N_SUPPORT //
NdisMoveMemory(&pAd->MlmeAux.APEdcaParm, pEdcaParm, sizeof(EDCA_PARM));
@@ -1075,7 +1068,6 @@
NdisMoveMemory(pAd->MlmeAux.ExtRate, ExtRate, ExtRateLen);
RTMPCheckRates(pAd, pAd->MlmeAux.ExtRate, &pAd->MlmeAux.ExtRateLen);
-#ifdef DOT11_N_SUPPORT
if (HtCapabilityLen > 0)
{
RTMPCheckHt(pAd, BSSID_WCID, pHtCapability, pAddHtInfo);
@@ -1084,7 +1076,6 @@
DBGPRINT(RT_DEBUG_TRACE, ("AssocPostProc===> (Mmps=%d, AmsduSize=%d, )\n",
pAd->MacTab.Content[BSSID_WCID].MmpsMode, pAd->MacTab.Content[BSSID_WCID].AMsduSize));
-#endif // DOT11_N_SUPPORT //
// Set New WPA information
Idx = BssTableSearch(&pAd->ScanTab, pAddr2, pAd->MlmeAux.Channel);
@@ -1535,11 +1526,9 @@
if ((pAd->CommonCfg.PhyMode == PHY_11G) && (MaxSupportedRate < RATE_FIRST_OFDM_RATE))
return FALSE;
-#ifdef DOT11_N_SUPPORT
// 11n only
if (((pAd->CommonCfg.PhyMode == PHY_11N_2_4G) || (pAd->CommonCfg.PhyMode == PHY_11N_5G))&& (HtCapabilityLen == 0))
return FALSE;
-#endif // DOT11_N_SUPPORT //
if (!pEntry)
return FALSE;
@@ -1585,7 +1574,6 @@
CLIENT_STATUS_CLEAR_FLAG(pEntry, fCLIENT_STATUS_PIGGYBACK_CAPABLE);
}
-#ifdef DOT11_N_SUPPORT
// If this Entry supports 802.11n, upgrade to HT rate.
if ((HtCapabilityLen != 0) && (pAd->CommonCfg.PhyMode >= PHY_11ABGN_MIXED))
{
@@ -1684,7 +1672,6 @@
}
NdisMoveMemory(&pEntry->HTCapability, pHtCapability, sizeof(HT_CAPABILITY_IE));
-#endif // DOT11_N_SUPPORT //
pEntry->HTPhyMode.word = pEntry->MaxHTPhyMode.word;
pEntry->CurrTxRate = pEntry->MaxSupportedRate;
diff --git a/drivers/staging/rt2870/sta/connect.c b/drivers/staging/rt2870/sta/connect.c
index b06c5c1..76f1b98 100644
--- a/drivers/staging/rt2870/sta/connect.c
+++ b/drivers/staging/rt2870/sta/connect.c
@@ -816,7 +816,7 @@
DBGPRINT(RT_DEBUG_TRACE, ("CNTL - Channel=%d, Start adhoc on W53(52,56,60,64) Channels are not accepted\n", pAd->CommonCfg.Channel));
return;
}
-#ifdef DOT11_N_SUPPORT
+
if (pAd->CommonCfg.PhyMode >= PHY_11ABGN_MIXED)
{
N_ChannelCheck(pAd);
@@ -840,7 +840,6 @@
}
}
else
-#endif // DOT11_N_SUPPORT //
{
pAd->StaActive.SupportedPhyInfo.bHtEnable = FALSE;
}
@@ -1127,9 +1126,8 @@
COPY_SETTINGS_FROM_MLME_AUX_TO_ACTIVE_CFG(pAd);
-#ifdef DOT11_N_SUPPORT
COPY_HTSETTINGS_FROM_MLME_AUX_TO_ACTIVE_CFG(pAd);
-#endif // DOT11_N_SUPPORT //
+
// It's quite difficult to tell if a newly added KEY is WEP or CKIP until a new BSS
// is formed (either ASSOC/RE-ASSOC done or IBSS started. LinkUP should be a safe place
// to examine if cipher algorithm switching is required.
@@ -1142,10 +1140,8 @@
OPSTATUS_SET_FLAG(pAd, fOP_STATUS_ADHOC_ON);
OPSTATUS_CLEAR_FLAG(pAd, fOP_STATUS_INFRA_ON);
-#ifdef DOT11_N_SUPPORT
if (pAd->CommonCfg.PhyMode >= PHY_11ABGN_MIXED)
AdhocTurnOnQos(pAd);
-#endif // DOT11_N_SUPPORT //
DBGPRINT(RT_DEBUG_TRACE, ("!!!Adhoc LINK UP !!! \n" ));
}
@@ -1164,7 +1160,6 @@
Value |= pAd->CommonCfg.RegTransmitSetting.field.TxBF;
RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R4, Value);
-#ifdef DOT11_N_SUPPORT
// Change to AP channel
if ((pAd->CommonCfg.CentralChannel > pAd->CommonCfg.Channel) && (pAd->MlmeAux.HtCapability.HtCapInfo.ChannelWidth == BW_40))
{
@@ -1228,7 +1223,6 @@
DBGPRINT(RT_DEBUG_TRACE, ("!!! 40MHz Upper LINK UP !!! Control Channel at UpperCentral = %d \n", pAd->CommonCfg.CentralChannel ));
}
else
-#endif // DOT11_N_SUPPORT //
{
pAd->CommonCfg.BBPCurrentBW = BW_20;
pAd->CommonCfg.CentralChannel = pAd->CommonCfg.Channel;
@@ -1267,9 +1261,7 @@
DBGPRINT(RT_DEBUG_TRACE, ("!!! LINK UP !!! (BssType=%d, AID=%d, ssid=%s, Channel=%d, CentralChannel = %d)\n",
BssType, pAd->StaActive.Aid, pAd->CommonCfg.Ssid, pAd->CommonCfg.Channel, pAd->CommonCfg.CentralChannel));
-#ifdef DOT11_N_SUPPORT
DBGPRINT(RT_DEBUG_TRACE, ("!!! LINK UP !!! (Density =%d, )\n", pAd->MacTab.Content[BSSID_WCID].MpduDensity));
-#endif // DOT11_N_SUPPORT //
AsicSetBssid(pAd, pAd->CommonCfg.Bssid);
@@ -1279,7 +1271,6 @@
// Call this for RTS protectionfor legacy rate, we will always enable RTS threshold, but normally it will not hit
AsicUpdateProtect(pAd, 0, (OFDMSETPROTECT | CCKSETPROTECT), TRUE, FALSE);
-#ifdef DOT11_N_SUPPORT
if ((pAd->StaActive.SupportedPhyInfo.bHtEnable == TRUE))
{
// Update HT protectionfor based on AP's operating mode.
@@ -1290,7 +1281,6 @@
else
AsicUpdateProtect(pAd, pAd->MlmeAux.AddHtInfo.AddHtInfo2.OperaionMode, ALLN_SETPROTECT, FALSE, FALSE);
}
-#endif // DOT11_N_SUPPORT //
NdisZeroMemory(&pAd->DrsCounters, sizeof(COUNTER_DRS));
@@ -1538,10 +1528,8 @@
pAd->MacTab.Content[BSSID_WCID].ClientStatusFlags));
MlmeUpdateTxRates(pAd, TRUE, BSS0);
-#ifdef DOT11_N_SUPPORT
MlmeUpdateHtTxRates(pAd, BSS0);
DBGPRINT(RT_DEBUG_TRACE, ("!!! LINK UP !! (StaActive.bHtEnable =%d, )\n", pAd->StaActive.SupportedPhyInfo.bHtEnable));
-#endif // DOT11_N_SUPPORT //
if (pAd->CommonCfg.bAggregationCapable)
{
@@ -1561,12 +1549,11 @@
if (pAd->MlmeAux.APRalinkIe != 0x0)
{
-#ifdef DOT11_N_SUPPORT
if (CLIENT_STATUS_TEST_FLAG(&pAd->MacTab.Content[BSSID_WCID], fCLIENT_STATUS_RDG_CAPABLE))
{
AsicEnableRDG(pAd);
}
-#endif // DOT11_N_SUPPORT //
+
OPSTATUS_SET_FLAG(pAd, fCLIENT_STATUS_RALINK_CHIPSET);
CLIENT_STATUS_SET_FLAG(&pAd->MacTab.Content[BSSID_WCID], fCLIENT_STATUS_RALINK_CHIPSET);
}
@@ -1577,9 +1564,7 @@
}
}
-#ifdef DOT11_N_SUPPORT
DBGPRINT(RT_DEBUG_TRACE, ("NDIS_STATUS_MEDIA_CONNECT Event B!.BACapability = %x. ClientStatusFlags = %lx\n", pAd->CommonCfg.BACapability.word, pAd->MacTab.Content[BSSID_WCID].ClientStatusFlags));
-#endif // DOT11_N_SUPPORT //
// Set LED
RTMPSetLED(pAd, LED_LINK_UP);
@@ -1604,13 +1589,13 @@
if (pAd->StaCfg.bAutoTxRateSwitch == FALSE)
{
pEntry->bAutoTxRateSwitch = FALSE;
-#ifdef DOT11_N_SUPPORT
+
if (pEntry->HTPhyMode.field.MCS == 32)
pEntry->HTPhyMode.field.ShortGI = GI_800;
if ((pEntry->HTPhyMode.field.MCS > MCS_7) || (pEntry->HTPhyMode.field.MCS == 32))
pEntry->HTPhyMode.field.STBC = STBC_NONE;
-#endif // DOT11_N_SUPPORT //
+
// If the legacy mode is set, overwrite the transmit setting of this entry.
if (pEntry->HTPhyMode.field.MODE <= MODE_OFDM)
RTMPUpdateLegacyTxSetting((UCHAR)pAd->StaCfg.DesiredTransmitSetting.field.FixedTxMode, pEntry);
@@ -1639,7 +1624,6 @@
RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R1, Value);
}
-#ifdef DOT11_N_SUPPORT
if (pAd->StaActive.SupportedPhyInfo.bHtEnable == FALSE)
{
}
@@ -1649,7 +1633,6 @@
// Because our Init value is 1 at MACRegTable.
RTMP_IO_WRITE32(pAd, MAX_LEN_CFG, 0x0fff);
}
-#endif // DOT11_N_SUPPORT //
// Patch for Marvel AP to gain high throughput
// Need to set as following,
@@ -1661,7 +1644,6 @@
// Txop can only be modified when RDG is off, WMM is disable and TxBurst is enable
//
// if 1. Legacy AP WMM on, or 2. 11n AP, AMPDU disable. Force turn off burst no matter what bEnableTxBurst is.
-#ifdef DOT11_N_SUPPORT
if (((pAd->StaActive.SupportedPhyInfo.bHtEnable == FALSE) && (OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_WMM_INUSED)))
|| ((pAd->StaActive.SupportedPhyInfo.bHtEnable == TRUE) && (pAd->CommonCfg.BACapability.field.Policy == BA_NOTUSE)))
{
@@ -1673,7 +1655,6 @@
DBGPRINT(RT_DEBUG_TRACE, ("Txburst 1\n"));
}
else
-#endif // DOT11_N_SUPPORT //
if (pAd->CommonCfg.bEnableTxBurst)
{
RTMP_IO_READ32(pAd, EDCA_AC0_CFG, &Data);
@@ -1695,7 +1676,6 @@
DBGPRINT(RT_DEBUG_TRACE, ("Txburst 3\n"));
}
-#ifdef DOT11_N_SUPPORT
// Re-check to turn on TX burst or not.
if ((pAd->CommonCfg.IOTestParm.bLastAtheros == TRUE) && ((STA_WEP_ON(pAd))||(STA_TKIP_ON(pAd))))
{
@@ -1715,7 +1695,6 @@
{
pAd->CommonCfg.IOTestParm.bNextDisableRxBA = FALSE;
}
-#endif // DOT11_N_SUPPORT //
pAd->CommonCfg.IOTestParm.bLastAtheros = FALSE;
COPY_MAC_ADDR(pAd->CommonCfg.LastBssid, pAd->CommonCfg.Bssid);
@@ -1883,12 +1862,11 @@
NdisZeroMemory(pAd->CommonCfg.Ssid, MAX_LEN_OF_SSID);
pAd->CommonCfg.SsidLen = 0;
}
-#ifdef DOT11_N_SUPPORT
+
NdisZeroMemory(&pAd->MlmeAux.HtCapability, sizeof(HT_CAPABILITY_IE));
NdisZeroMemory(&pAd->MlmeAux.AddHtInfo, sizeof(ADD_HT_INFO_IE));
pAd->MlmeAux.HtCapabilityLen = 0;
pAd->MlmeAux.NewExtChannelOffset = 0xff;
-#endif // DOT11_N_SUPPORT //
// Reset WPA-PSK state. Only reset when supplicant enabled
if (pAd->StaCfg.WpaState != SS_NOTUSE)
@@ -1970,7 +1948,6 @@
pAd->CommonCfg.MlmeRate = pAd->CommonCfg.BasicMlmeRate;
pAd->CommonCfg.RtsRate = pAd->CommonCfg.BasicMlmeRate;
-#ifdef DOT11_N_SUPPORT
//
// After Link down, reset piggy-back setting in ASIC. Disable RDG.
//
@@ -1981,7 +1958,7 @@
ByteValue &= (~0x18);
RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R4, ByteValue);
}
-#endif // DOT11_N_SUPPORT //
+
// Reset DAC
RTMP_BBP_IO_READ8_BY_REG_ID(pAd, BBP_R1, &ByteValue);
ByteValue &= (~0x18);
@@ -1994,9 +1971,7 @@
RTMPSetPiggyBack(pAd,FALSE);
OPSTATUS_CLEAR_FLAG(pAd, fOP_STATUS_PIGGYBACK_INUSED);
-#ifdef DOT11_N_SUPPORT
pAd->CommonCfg.BACapability.word = pAd->CommonCfg.REGBACapability.word;
-#endif // DOT11_N_SUPPORT //
// Restore all settings in the following.
AsicUpdateProtect(pAd, 0, (ALLN_SETPROTECT|CCKSETPROTECT|OFDMSETPROTECT), TRUE, FALSE);
@@ -2420,7 +2395,6 @@
FrameLen += tmp;
}
-#ifdef DOT11_N_SUPPORT
if ((pAd->CommonCfg.PhyMode >= PHY_11ABGN_MIXED))
{
ULONG TmpLen;
@@ -2441,7 +2415,6 @@
FrameLen += TmpLen;
}
-#endif // DOT11_N_SUPPORT //
//beacon use reserved WCID 0xff
if (pAd->CommonCfg.Channel > 14)
diff --git a/drivers/staging/rt2870/sta/rtmp_data.c b/drivers/staging/rt2870/sta/rtmp_data.c
index 45b6c47..e84cb6f 100644
--- a/drivers/staging/rt2870/sta/rtmp_data.c
+++ b/drivers/staging/rt2870/sta/rtmp_data.c
@@ -182,13 +182,12 @@
else
{
RX_BLK_SET_FLAG(pRxBlk, fRX_EAP);
-#ifdef DOT11_N_SUPPORT
+
if (RX_BLK_TEST_FLAG(pRxBlk, fRX_AMPDU) && (pAd->CommonCfg.bDisableReordering == 0))
{
Indicate_AMPDU_Packet(pAd, pRxBlk, FromWhichBSSID);
}
else
-#endif // DOT11_N_SUPPORT //
{
// Determin the destination of the EAP frame
// to WPA state machine or upper layer
@@ -439,12 +438,10 @@
else
#endif
{
-#ifdef DOT11_N_SUPPORT
RX_BLK_SET_FLAG(pRxBlk, fRX_HTC);
// skip HTC contorl field
pRxBlk->pData += 4;
pRxBlk->DataSize -= 4;
-#endif // DOT11_N_SUPPORT //
}
}
@@ -457,13 +454,10 @@
pRxBlk->pData += 2;
}
-#ifdef DOT11_N_SUPPORT
if (pRxD->BA)
{
RX_BLK_SET_FLAG(pRxBlk, fRX_AMPDU);
}
-#endif // DOT11_N_SUPPORT //
-
//
// Case I Process Broadcast & Multicast data frame
@@ -592,21 +586,17 @@
IN PRTMP_ADAPTER pAd,
IN RX_BLK *pRxBlk)
{
-#ifdef DOT11_N_SUPPORT
PRXWI_STRUC pRxWI = pRxBlk->pRxWI;
-#endif // DOT11_N_SUPPORT //
PHEADER_802_11 pHeader = pRxBlk->pHeader;
PNDIS_PACKET pRxPacket = pRxBlk->pRxPacket;
switch (pHeader->FC.SubType)
{
case SUBTYPE_BLOCK_ACK_REQ:
-#ifdef DOT11_N_SUPPORT
{
CntlEnqueueForRecv(pAd, pRxWI->WirelessCliID, (pRxWI->MPDUtotalByteCount), (PFRAME_BA_REQ)pHeader);
}
break;
-#endif // DOT11_N_SUPPORT //
case SUBTYPE_BLOCK_ACK:
case SUBTYPE_ACK:
default:
@@ -983,10 +973,8 @@
NumberOfFrag = 1; // Aggregation overwhelms fragmentation
else if (CLIENT_STATUS_TEST_FLAG(pEntry, fCLIENT_STATUS_AMSDU_INUSED))
NumberOfFrag = 1; // Aggregation overwhelms fragmentation
-#ifdef DOT11_N_SUPPORT
else if ((pAd->StaCfg.HTPhyMode.field.MODE == MODE_HTMIX) || (pAd->StaCfg.HTPhyMode.field.MODE == MODE_HTGREENFIELD))
NumberOfFrag = 1; // MIMO RATE overwhelms fragmentation
-#endif // DOT11_N_SUPPORT //
else
{
// The calculated "NumberOfFrag" is a rough estimation because of various
@@ -1087,7 +1075,6 @@
}
RTMP_IRQ_UNLOCK(&pAd->irq_lock, IrqFlags);
-#ifdef DOT11_N_SUPPORT
if ((pAd->CommonCfg.BACapability.field.AutoBA == TRUE)&&
IS_HT_STA(pEntry))
{
@@ -1106,7 +1093,6 @@
BAOriSessionSetUp(pAd, pEntry, 0, 0, 10, FALSE);
}
}
-#endif // DOT11_N_SUPPORT //
pAd->RalinkCounters.OneSecOsTxCount[QueIdx]++; // TODO: for debug only. to be removed
return NDIS_STATUS_SUCCESS;
@@ -1426,7 +1412,6 @@
pHeader_802_11->FC.PwrMgmt = (pAd->StaCfg.Psm == PWR_SAVE);
}
-#ifdef DOT11_N_SUPPORT
VOID STABuildCache802_11Header(
IN RTMP_ADAPTER *pAd,
IN TX_BLK *pTxBlk,
@@ -1468,7 +1453,6 @@
else
pHeader80211->FC.PwrMgmt = (pAd->StaCfg.Psm == PWR_SAVE);
}
-#endif // DOT11_N_SUPPORT //
static inline PUCHAR STA_Build_ARalink_Frame_Header(
IN RTMP_ADAPTER *pAd,
@@ -1528,7 +1512,6 @@
}
-#ifdef DOT11_N_SUPPORT
static inline PUCHAR STA_Build_AMSDU_Frame_Header(
IN RTMP_ADAPTER *pAd,
IN TX_BLK *pTxBlk)
@@ -1850,7 +1833,6 @@
//
HAL_KickOutTx(pAd, pTxBlk, pTxBlk->QueIdx);
}
-#endif // DOT11_N_SUPPORT //
VOID STA_Legacy_Frame_Tx(
IN PRTMP_ADAPTER pAd,
@@ -2361,14 +2343,12 @@
switch (pTxBlk->TxFrameType)
{
-#ifdef DOT11_N_SUPPORT
case TX_AMPDU_FRAME:
STA_AMPDU_Frame_Tx(pAd, pTxBlk);
break;
case TX_AMSDU_FRAME:
STA_AMSDU_Frame_Tx(pAd, pTxBlk);
break;
-#endif // DOT11_N_SUPPORT //
case TX_LEGACY_FRAME:
STA_Legacy_Frame_Tx(pAd, pTxBlk);
break;
diff --git a/drivers/staging/rt2870/sta/sanity.c b/drivers/staging/rt2870/sta/sanity.c
index 2398724..7d530f6 100644
--- a/drivers/staging/rt2870/sta/sanity.c
+++ b/drivers/staging/rt2870/sta/sanity.c
@@ -184,7 +184,6 @@
}
break;
-#ifdef DOT11_N_SUPPORT
case IE_ADD_HT:
case IE_ADD_HT2:
if (pEid->Len >= sizeof(ADD_HT_INFO_IE))
@@ -213,7 +212,6 @@
{
DBGPRINT(RT_DEBUG_WARN, ("PeerAssocRspSanity - wrong IE_SECONDARY_CH_OFFSET. \n"));
}
-#endif // DOT11_N_SUPPORT //
break;
case IE_AIRONET_CKIP:
// 0. Check Aironet IE length, it must be larger or equal to 28
diff --git a/drivers/staging/rt2870/sta/sync.c b/drivers/staging/rt2870/sta/sync.c
index a489ebc..7533b9d 100644
--- a/drivers/staging/rt2870/sta/sync.c
+++ b/drivers/staging/rt2870/sta/sync.c
@@ -108,7 +108,6 @@
if (RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_HALT_IN_PROGRESS))
return;
-#ifdef DOT11_N_SUPPORT
if ((pAd->CommonCfg.BBPCurrentBW == BW_40)
)
{
@@ -121,7 +120,6 @@
RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R4, BBPValue);
DBGPRINT(RT_DEBUG_TRACE, ("SYNC - End of SCAN, restore to 40MHz channel %d, Total BSS[%02d]\n",pAd->CommonCfg.CentralChannel, pAd->ScanTab.BssNr));
}
-#endif // DOT11_N_SUPPORT //
MlmeEnqueue(pAd, SYNC_STATE_MACHINE, MT2_BEACON_TIMEOUT, 0, NULL);
RT28XX_MLME_HANDLER(pAd);
@@ -475,7 +473,7 @@
pAd->MlmeAux.ExtRateLen = pAd->CommonCfg.ExtRateLen;
NdisMoveMemory(pAd->MlmeAux.ExtRate, pAd->CommonCfg.ExtRate, MAX_LEN_OF_SUPPORTED_RATES);
RTMPCheckRates(pAd, pAd->MlmeAux.ExtRate, &pAd->MlmeAux.ExtRateLen);
-#ifdef DOT11_N_SUPPORT
+
if (pAd->CommonCfg.PhyMode >= PHY_11ABGN_MIXED)
{
RTMPUpdateHTIE(&pAd->CommonCfg.DesiredHtPhy, &pAd->StaCfg.DesiredHtPhyInfo.MCSSet[0], &pAd->MlmeAux.HtCapability, &pAd->MlmeAux.AddHtInfo);
@@ -484,7 +482,6 @@
DBGPRINT(RT_DEBUG_TRACE, ("SYNC -pAd->StaActive.SupportedHtPhy.bHtEnable = TRUE\n"));
}
else
-#endif // DOT11_N_SUPPORT //
{
pAd->MlmeAux.HtCapabilityLen = 0;
pAd->StaActive.SupportedPhyInfo.bHtEnable = FALSE;
@@ -554,10 +551,9 @@
// Init Variable IE structure
pVIE = (PNDIS_802_11_VARIABLE_IEs) VarIE;
pVIE->Length = 0;
-#ifdef DOT11_N_SUPPORT
+
RTMPZeroMemory(&HtCapability, sizeof(HtCapability));
RTMPZeroMemory(&AddHtInfo, sizeof(ADD_HT_INFO_IE));
-#endif // DOT11_N_SUPPORT //
if (PeerBeaconAndProbeRspSanity(pAd,
Elem->Msg,
@@ -608,11 +604,9 @@
Rssi = RTMPMaxRssi(pAd, ConvertToRssi(pAd, Elem->Rssi0, RSSI_0), ConvertToRssi(pAd, Elem->Rssi1, RSSI_1), ConvertToRssi(pAd, Elem->Rssi2, RSSI_2));
-
-#ifdef DOT11_N_SUPPORT
if ((HtCapabilityLen > 0) || (PreNHtCapabilityLen > 0))
HtCapabilityLen = SIZE_HT_CAP_IE;
-#endif // DOT11_N_SUPPORT //
+
if ((pAd->StaCfg.CCXReqType != MSRN_TYPE_UNUSED) && (Channel == pAd->StaCfg.CCXScanChannel))
{
Idx = BssTableSetEntry(pAd, &pAd->StaCfg.CCXBssTab, Bssid, Ssid, SsidLen, BssType, BeaconPeriod,
@@ -682,9 +676,7 @@
UCHAR HtCapabilityLen = 0, PreNHtCapabilityLen = 0;
UCHAR AddHtInfoLen;
UCHAR NewExtChannelOffset = 0xff;
-#ifdef DOT11_N_SUPPORT
UCHAR CentralChannel;
-#endif // DOT11_N_SUPPORT //
// Init Variable IE structure
pVIE = (PNDIS_802_11_VARIABLE_IEs) VarIE;
@@ -800,7 +792,7 @@
RTMPCheckRates(pAd, pAd->MlmeAux.ExtRate, &pAd->MlmeAux.ExtRateLen);
NdisZeroMemory(pAd->StaActive.SupportedPhyInfo.MCSSet, 16);
-#ifdef DOT11_N_SUPPORT
+
pAd->MlmeAux.NewExtChannelOffset = NewExtChannelOffset;
pAd->MlmeAux.HtCapabilityLen = HtCapabilityLen;
@@ -845,7 +837,6 @@
}
else
-#endif // DOT11_N_SUPPORT //
{
// To prevent error, let legacy AP must have same CentralChannel and Channel.
if ((HtCapabilityLen == 0) && (PreNHtCapabilityLen == 0))
@@ -860,9 +851,7 @@
// copy QOS related information
if ((pAd->CommonCfg.bWmmCapable)
-#ifdef DOT11_N_SUPPORT
|| (pAd->CommonCfg.PhyMode >= PHY_11ABGN_MIXED)
-#endif // DOT11_N_SUPPORT //
)
{
NdisMoveMemory(&pAd->MlmeAux.APEdcaParm, &EdcaParm, sizeof(EDCA_PARM));
@@ -1003,14 +992,12 @@
if (pAd->Mlme.CntlMachine.CurrState == CNTL_WAIT_DISASSOC)
return;
-#ifdef DOT11_N_SUPPORT
// Copy Control channel for this BSSID.
if (AddHtInfoLen != 0)
Channel = AddHtInfo.ControlChan;
if ((HtCapabilityLen > 0) || (PreNHtCapabilityLen > 0))
HtCapabilityLen = SIZE_HT_CAP_IE;
-#endif // DOT11_N_SUPPORT //
//
// Housekeeping "SsidBssTab" table for later-on ROAMing usage.
@@ -1248,7 +1235,6 @@
DBGPRINT(RT_DEBUG_WARN, ("SYNC - AP changed B/G protection to %d\n", bUseBGProtection));
}
-#ifdef DOT11_N_SUPPORT
// check Ht protection mode. and adhere to the Non-GF device indication by AP.
if ((AddHtInfoLen != 0) &&
((AddHtInfo.AddHtInfo2.OperaionMode != pAd->MlmeAux.AddHtInfo.AddHtInfo2.OperaionMode) ||
@@ -1265,7 +1251,6 @@
DBGPRINT(RT_DEBUG_TRACE, ("SYNC - AP changed N OperaionMode to %d\n", pAd->MlmeAux.AddHtInfo.AddHtInfo2.OperaionMode));
}
-#endif // DOT11_N_SUPPORT //
if (OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_SHORT_PREAMBLE_INUSED) &&
ERP_IS_USE_BARKER_PREAMBLE(Erp))
@@ -1360,9 +1345,7 @@
UCHAR Addr2[MAC_ADDR_LEN];
CHAR Ssid[MAX_LEN_OF_SSID];
UCHAR SsidLen;
-#ifdef DOT11_N_SUPPORT
UCHAR HtLen, AddHtLen, NewExtLen;
-#endif // DOT11_N_SUPPORT //
HEADER_802_11 ProbeRspHdr;
NDIS_STATUS NStatus;
PUCHAR pOutBuffer = NULL;
@@ -1435,7 +1418,7 @@
END_OF_ARGS);
FrameLen += tmp;
}
-#ifdef DOT11_N_SUPPORT
+
if (pAd->CommonCfg.PhyMode >= PHY_11ABGN_MIXED)
{
ULONG TmpLen;
@@ -1468,7 +1451,7 @@
}
FrameLen += TmpLen;
}
-#endif // DOT11_N_SUPPORT //
+
MiniportMMRequest(pAd, 0, pOutBuffer, FrameLen);
MlmeFreeMemory(pAd, pOutBuffer);
}
diff --git a/drivers/staging/rt2870/sta_ioctl.c b/drivers/staging/rt2870/sta_ioctl.c
index d02488a..e3294be 100644
--- a/drivers/staging/rt2870/sta_ioctl.c
+++ b/drivers/staging/rt2870/sta_ioctl.c
@@ -190,11 +190,9 @@
IN PRTMP_ADAPTER pAdapter,
IN PUCHAR arg);
-#ifdef DOT11_N_SUPPORT
INT Set_TGnWifiTest_Proc(
IN PRTMP_ADAPTER pAd,
IN PUCHAR arg);
-#endif // DOT11_N_SUPPORT //
INT Set_LongRetryLimit_Proc(
IN PRTMP_ADAPTER pAdapter,
@@ -224,7 +222,6 @@
{"BGProtection", Set_BGProtection_Proc},
{"RTSThreshold", Set_RTSThreshold_Proc},
{"FragThreshold", Set_FragThreshold_Proc},
-#ifdef DOT11_N_SUPPORT
{"HtBw", Set_HtBw_Proc},
{"HtMcs", Set_HtMcs_Proc},
{"HtGi", Set_HtGi_Proc},
@@ -238,8 +235,6 @@
{"HtBaDecline", Set_BADecline_Proc},
{"HtProtect", Set_HtProtect_Proc},
{"HtMimoPs", Set_HtMimoPs_Proc},
-#endif // DOT11_N_SUPPORT //
-
#ifdef AGGREGATION_SUPPORT
{"PktAggregate", Set_PktAggregate_Proc},
#endif
@@ -264,10 +259,8 @@
#endif
{"WpaSupport", Set_Wpa_Support},
{"FixedTxMode", Set_FixedTxMode_Proc},
-#ifdef DOT11_N_SUPPORT
{"TGnWifiTest", Set_TGnWifiTest_Proc},
{"ForceGF", Set_ForceGF_Proc},
-#endif // DOT11_N_SUPPORT //
{"LongRetry", Set_LongRetryLimit_Proc},
{"ShortRetry", Set_ShortRetryLimit_Proc},
{NULL,}
@@ -1888,7 +1881,6 @@
return Status;
}
-#ifdef DOT11_N_SUPPORT
void getBaInfo(
IN PRTMP_ADAPTER pAd,
IN PUCHAR pOutBuf)
@@ -1935,7 +1927,6 @@
return;
}
-#endif // DOT11_N_SUPPORT //
static int
rt_private_show(struct net_device *dev, struct iw_request_info *info,
@@ -1981,12 +1972,10 @@
case SHOW_CONN_STATUS:
if (MONITOR_ON(pAd))
{
-#ifdef DOT11_N_SUPPORT
if (pAd->CommonCfg.PhyMode >= PHY_11ABGN_MIXED &&
pAd->CommonCfg.RegTransmitSetting.field.BW)
sprintf(extra, "Monitor Mode(CentralChannel %d)\n", pAd->CommonCfg.CentralChannel);
else
-#endif // DOT11_N_SUPPORT //
sprintf(extra, "Monitor Mode(Channel %d)\n", pAd->CommonCfg.Channel);
}
else
@@ -2020,12 +2009,10 @@
sprintf(extra, "Driver version-%s, %s %s\n", STA_DRIVER_VERSION, __DATE__, __TIME__ );
wrq->length = strlen(extra) + 1; // 1: size of '\0'
break;
-#ifdef DOT11_N_SUPPORT
case SHOW_BA_INFO:
getBaInfo(pAd, extra);
wrq->length = strlen(extra) + 1; // 1: size of '\0'
break;
-#endif // DOT11_N_SUPPORT //
case SHOW_DESC_INFO:
{
Show_DescInfo_Proc(pAd, NULL);
@@ -2868,9 +2855,7 @@
(pAd->MacTab.Content[BSSID_WCID].HTPhyMode.field.MODE <= MODE_OFDM))
RTMPSetDesiredRates(pAd, -1);
-#ifdef DOT11_N_SUPPORT
SetCommonHT(pAd);
-#endif // DOT11_N_SUPPORT //
}
else
{
@@ -2883,9 +2868,7 @@
else
{
pAd->StaCfg.DesiredTransmitSetting.field.MCS = MCS_AUTO;
-#ifdef DOT11_N_SUPPORT
SetCommonHT(pAd);
-#endif // DOT11_N_SUPPORT //
}
DBGPRINT(RT_DEBUG_TRACE, ("rt_ioctl_siwrate::(HtMcs=%d)\n",pAd->StaCfg.DesiredTransmitSetting.field.MCS));
}
@@ -2933,14 +2916,12 @@
else
ht_setting.word = pAd->MacTab.Content[BSSID_WCID].HTPhyMode.word;
-#ifdef DOT11_N_SUPPORT
if (ht_setting.field.MODE >= MODE_HTMIX)
{
// rate_index = 12 + ((UCHAR)ht_setting.field.BW *16) + ((UCHAR)ht_setting.field.ShortGI *32) + ((UCHAR)ht_setting.field.MCS);
rate_index = 12 + ((UCHAR)ht_setting.field.BW *24) + ((UCHAR)ht_setting.field.ShortGI *48) + ((UCHAR)ht_setting.field.MCS);
}
else
-#endif // DOT11_N_SUPPORT //
if (ht_setting.field.MODE == MODE_OFDM)
rate_index = (UCHAR)(ht_setting.field.MCS) + 4;
else if (ht_setting.field.MODE == MODE_CCK)
@@ -3105,18 +3086,13 @@
ULONG PowerTemp;
BOOLEAN RadioState;
BOOLEAN StateMachineTouched = FALSE;
-#ifdef DOT11_N_SUPPORT
OID_SET_HT_PHYMODE HT_PhyMode; //11n ,kathy
-#endif // DOT11_N_SUPPORT //
PNDIS_802_11_PMKID pPmkId = NULL;
BOOLEAN IEEE8021xState = FALSE;
BOOLEAN IEEE8021x_required_keys = FALSE;
UCHAR wpa_supplicant_enable = 0;
-#ifdef DOT11_N_SUPPORT
MaxPhyMode = PHY_11N_5G;
-#endif // DOT11_N_SUPPORT //
-
DBGPRINT(RT_DEBUG_TRACE, ("-->RTMPSetInformation(), 0x%08x\n", cmd&0x7FFF));
switch(cmd & 0x7FFF) {
@@ -3136,9 +3112,7 @@
pAdapter->CommonCfg.PhyMode = 0xff;
// Build all corresponding channel information
RTMPSetPhyMode(pAdapter, TmpPhy);
-#ifdef DOT11_N_SUPPORT
SetCommonHT(pAdapter);
-#endif // DOT11_N_SUPPORT //
DBGPRINT(RT_DEBUG_TRACE, ("Set::RT_OID_802_11_COUNTRY_REGION (A:%d B/G:%d)\n", pAdapter->CommonCfg.CountryRegionForABand,
pAdapter->CommonCfg.CountryRegion));
}
@@ -3316,9 +3290,7 @@
if (PhyMode <= MaxPhyMode)
{
RTMPSetPhyMode(pAdapter, PhyMode);
-#ifdef DOT11_N_SUPPORT
SetCommonHT(pAdapter);
-#endif // DOT11_N_SUPPORT //
}
DBGPRINT(RT_DEBUG_TRACE, ("Set::RT_OID_802_11_PHY_MODE (=%d)\n", PhyMode));
}
@@ -3596,10 +3568,10 @@
RTMPSetPhyMode(pAdapter, PHY_11A);
else
Status = -EINVAL;
-#ifdef DOT11_N_SUPPORT
+
if (Status == NDIS_STATUS_SUCCESS)
SetCommonHT(pAdapter);
-#endif // DOT11_N_SUPPORT //
+
DBGPRINT(RT_DEBUG_TRACE, ("Set::OID_802_11_NETWORK_TYPE_IN_USE (=%d)\n",NetType));
}
break;
@@ -3743,7 +3715,6 @@
pAdapter->bConfigChanged = TRUE;
}
break;
-#ifdef DOT11_N_SUPPORT
case RT_OID_802_11_SET_HT_PHYMODE:
if (wrq->u.data.length != sizeof(OID_SET_HT_PHYMODE))
Status = -EINVAL;
@@ -3762,7 +3733,6 @@
pAdapter->StaCfg.HTPhyMode.field.MCS, pAdapter->StaCfg.HTPhyMode.field.BW, pAdapter->StaCfg.HTPhyMode.field.ShortGI,
pAdapter->StaCfg.HTPhyMode.field.STBC));
break;
-#endif // DOT11_N_SUPPORT //
case RT_OID_802_11_SET_APSD_SETTING:
if (wrq->u.data.length != sizeof(ULONG))
Status = -EINVAL;
@@ -3845,8 +3815,6 @@
StateMachineTouched = TRUE;
}
break;
-
-#ifdef DOT11_N_SUPPORT
case RT_OID_802_11_SET_IMME_BA_CAP:
if (wrq->u.data.length != sizeof(OID_BACAP_STRUC))
Status = -EINVAL;
@@ -4001,8 +3969,6 @@
}
}
break;
-#endif // DOT11_N_SUPPORT //
-
// For WPA_SUPPLICANT to set static wep key
case OID_802_11_ADD_WEP:
pWepKey = kmalloc(wrq->u.data.length, MEM_ALLOC_FLAG);
@@ -5342,19 +5308,14 @@
DBGPRINT(RT_DEBUG_TRACE, ("fOP_STATUS_MEDIA_STATE_CONNECTED \n"));
if (pAdapter->CommonCfg.CentralChannel == 0)
{
-#ifdef DOT11_N_SUPPORT
if (pAdapter->CommonCfg.PhyMode == PHY_11AN_MIXED)
pAdapter->CommonCfg.CentralChannel = 36;
else
-#endif // DOT11_N_SUPPORT //
pAdapter->CommonCfg.CentralChannel = 6;
}
-#ifdef DOT11_N_SUPPORT
else
N_ChannelCheck(pAdapter);
-#endif // DOT11_N_SUPPORT //
-#ifdef DOT11_N_SUPPORT
if (pAdapter->CommonCfg.PhyMode >= PHY_11ABGN_MIXED &&
pAdapter->CommonCfg.RegTransmitSetting.field.BW == BW_40 &&
pAdapter->CommonCfg.RegTransmitSetting.field.EXTCHA == EXTCHA_ABOVE)
@@ -5405,7 +5366,6 @@
pAdapter->CommonCfg.CentralChannel));
}
else
-#endif // DOT11_N_SUPPORT //
{
// 20MHz
RTMP_BBP_IO_READ8_BY_REG_ID(pAdapter, BBP_R4, &bbpValue);
@@ -6426,9 +6386,7 @@
sprintf(extra, "\n");
-#ifdef DOT11_N_SUPPORT
sprintf(extra + strlen(extra), "HT Operating Mode : %d\n", pAd->CommonCfg.AddHTInfo.AddHtInfo2.OperaionMode);
-#endif // DOT11_N_SUPPORT //
sprintf(extra + strlen(extra), "\n%-19s%-4s%-4s%-7s%-7s%-7s%-10s%-6s%-6s%-6s%-6s\n",
"MAC", "AID", "BSS", "RSSI0", "RSSI1", "RSSI2", "PhMd", "BW", "MCS", "SGI", "STBC");