drm/radeon/kms: add support for cayman gart setup
This patch sets up the gart in legacy mode. We
probably want to switch to full VM mode at some point.
Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
diff --git a/drivers/gpu/drm/radeon/nid.h b/drivers/gpu/drm/radeon/nid.h
index b4ba1b0..9dc2b34 100644
--- a/drivers/gpu/drm/radeon/nid.h
+++ b/drivers/gpu/drm/radeon/nid.h
@@ -43,10 +43,66 @@
#define DMIF_ADDR_CONFIG 0xBD4
+#define VM_CONTEXT0_REQUEST_RESPONSE 0x1470
+#define REQUEST_TYPE(x) (((x) & 0xf) << 0)
+#define RESPONSE_TYPE_MASK 0x000000F0
+#define RESPONSE_TYPE_SHIFT 4
+#define VM_L2_CNTL 0x1400
+#define ENABLE_L2_CACHE (1 << 0)
+#define ENABLE_L2_FRAGMENT_PROCESSING (1 << 1)
+#define ENABLE_L2_PTE_CACHE_LRU_UPDATE_BY_WRITE (1 << 9)
+#define ENABLE_L2_PDE0_CACHE_LRU_UPDATE_BY_WRITE (1 << 10)
+#define EFFECTIVE_L2_QUEUE_SIZE(x) (((x) & 7) << 14)
+#define CONTEXT1_IDENTITY_ACCESS_MODE(x) (((x) & 3) << 18)
+/* CONTEXT1_IDENTITY_ACCESS_MODE
+ * 0 physical = logical
+ * 1 logical via context1 page table
+ * 2 inside identity aperture use translation, outside physical = logical
+ * 3 inside identity aperture physical = logical, outside use translation
+ */
+#define VM_L2_CNTL2 0x1404
+#define INVALIDATE_ALL_L1_TLBS (1 << 0)
+#define INVALIDATE_L2_CACHE (1 << 1)
+#define VM_L2_CNTL3 0x1408
+#define BANK_SELECT(x) ((x) << 0)
+#define CACHE_UPDATE_MODE(x) ((x) << 6)
+#define L2_CACHE_BIGK_ASSOCIATIVITY (1 << 20)
+#define L2_CACHE_BIGK_FRAGMENT_SIZE(x) ((x) << 15)
+#define VM_L2_STATUS 0x140C
+#define L2_BUSY (1 << 0)
+#define VM_CONTEXT0_CNTL 0x1410
+#define ENABLE_CONTEXT (1 << 0)
+#define PAGE_TABLE_DEPTH(x) (((x) & 3) << 1)
+#define RANGE_PROTECTION_FAULT_ENABLE_DEFAULT (1 << 4)
+#define VM_CONTEXT1_CNTL 0x1414
+#define VM_CONTEXT0_CNTL2 0x1430
+#define VM_CONTEXT1_CNTL2 0x1434
+#define VM_INVALIDATE_REQUEST 0x1478
+#define VM_INVALIDATE_RESPONSE 0x147c
+#define VM_CONTEXT0_PROTECTION_FAULT_DEFAULT_ADDR 0x1518
+#define VM_CONTEXT1_PROTECTION_FAULT_DEFAULT_ADDR 0x151c
+#define VM_CONTEXT0_PAGE_TABLE_BASE_ADDR 0x153C
+#define VM_CONTEXT0_PAGE_TABLE_START_ADDR 0x155C
+#define VM_CONTEXT0_PAGE_TABLE_END_ADDR 0x157C
+
#define MC_SHARED_CHMAP 0x2004
#define NOOFCHAN_SHIFT 12
#define NOOFCHAN_MASK 0x00003000
#define MC_SHARED_CHREMAP 0x2008
+
+#define MC_VM_SYSTEM_APERTURE_LOW_ADDR 0x2034
+#define MC_VM_SYSTEM_APERTURE_HIGH_ADDR 0x2038
+#define MC_VM_SYSTEM_APERTURE_DEFAULT_ADDR 0x203C
+#define MC_VM_MX_L1_TLB_CNTL 0x2064
+#define ENABLE_L1_TLB (1 << 0)
+#define ENABLE_L1_FRAGMENT_PROCESSING (1 << 1)
+#define SYSTEM_ACCESS_MODE_PA_ONLY (0 << 3)
+#define SYSTEM_ACCESS_MODE_USE_SYS_MAP (1 << 3)
+#define SYSTEM_ACCESS_MODE_IN_SYS (2 << 3)
+#define SYSTEM_ACCESS_MODE_NOT_IN_SYS (3 << 3)
+#define SYSTEM_APERTURE_UNMAPPED_ACCESS_PASS_THRU (0 << 5)
+#define ENABLE_ADVANCED_DRIVER_MODEL (1 << 6)
+
#define MC_SHARED_BLACKOUT_CNTL 0x20ac
#define MC_ARB_RAMCFG 0x2760
#define NOOFBANK_SHIFT 0
@@ -87,6 +143,7 @@
#define CONFIG_MEMSIZE 0x5428
+#define HDP_MEM_COHERENCY_FLUSH_CNTL 0x5480
#define HDP_REG_COHERENCY_FLUSH_CNTL 0x54A0
#define GRBM_CNTL 0x8000