bcache: Drop some closure stuff
With a the recent bcache refactoring, some of the closure code isn't
needed anymore.
Signed-off-by: Kent Overstreet <kmo@daterainc.com>
diff --git a/drivers/md/bcache/closure.h b/drivers/md/bcache/closure.h
index ab011f0..9762f1b 100644
--- a/drivers/md/bcache/closure.h
+++ b/drivers/md/bcache/closure.h
@@ -155,21 +155,6 @@
* delayed_work embeds a work item and a timer_list. The important thing is, use
* it exactly like you would a regular closure and closure_put() will magically
* handle everything for you.
- *
- * We've got closures that embed timers, too. They're called, appropriately
- * enough:
- * struct closure_with_timer;
- *
- * This gives you access to closure_delay(). It takes a refcount for a specified
- * number of jiffies - you could then call closure_sync() (for a slightly
- * convoluted version of msleep()) or continue_at() - which gives you the same
- * effect as using a delayed work item, except you can reuse the work_struct
- * already embedded in struct closure.
- *
- * Lastly, there's struct closure_with_waitlist_and_timer. It does what you
- * probably expect, if you happen to need the features of both. (You don't
- * really want to know how all this is implemented, but if I've done my job
- * right you shouldn't have to care).
*/
struct closure;
@@ -182,16 +167,11 @@
enum closure_type {
TYPE_closure = 0,
TYPE_closure_with_waitlist = 1,
- TYPE_closure_with_timer = 2,
- TYPE_closure_with_waitlist_and_timer = 3,
- MAX_CLOSURE_TYPE = 3,
+ MAX_CLOSURE_TYPE = 1,
};
enum closure_state {
/*
- * CLOSURE_BLOCKING: Causes closure_wait_event() to block, instead of
- * waiting asynchronously
- *
* CLOSURE_WAITING: Set iff the closure is on a waitlist. Must be set by
* the thread that owns the closure, and cleared by the thread that's
* waking up the closure.
@@ -200,10 +180,6 @@
* - indicates that cl->task is valid and closure_put() may wake it up.
* Only set or cleared by the thread that owns the closure.
*
- * CLOSURE_TIMER: Analagous to CLOSURE_WAITING, indicates that a closure
- * has an outstanding timer. Must be set by the thread that owns the
- * closure, and cleared by the timer function when the timer goes off.
- *
* The rest are for debugging and don't affect behaviour:
*
* CLOSURE_RUNNING: Set when a closure is running (i.e. by
@@ -218,19 +194,17 @@
* closure with this flag set
*/
- CLOSURE_BITS_START = (1 << 19),
- CLOSURE_DESTRUCTOR = (1 << 19),
- CLOSURE_BLOCKING = (1 << 21),
- CLOSURE_WAITING = (1 << 23),
- CLOSURE_SLEEPING = (1 << 25),
- CLOSURE_TIMER = (1 << 27),
+ CLOSURE_BITS_START = (1 << 23),
+ CLOSURE_DESTRUCTOR = (1 << 23),
+ CLOSURE_WAITING = (1 << 25),
+ CLOSURE_SLEEPING = (1 << 27),
CLOSURE_RUNNING = (1 << 29),
CLOSURE_STACK = (1 << 31),
};
#define CLOSURE_GUARD_MASK \
- ((CLOSURE_DESTRUCTOR|CLOSURE_BLOCKING|CLOSURE_WAITING| \
- CLOSURE_SLEEPING|CLOSURE_TIMER|CLOSURE_RUNNING|CLOSURE_STACK) << 1)
+ ((CLOSURE_DESTRUCTOR|CLOSURE_WAITING|CLOSURE_SLEEPING| \
+ CLOSURE_RUNNING|CLOSURE_STACK) << 1)
#define CLOSURE_REMAINING_MASK (CLOSURE_BITS_START - 1)
#define CLOSURE_REMAINING_INITIALIZER (1|CLOSURE_RUNNING)
@@ -268,17 +242,6 @@
struct closure_waitlist wait;
};
-struct closure_with_timer {
- struct closure cl;
- struct timer_list timer;
-};
-
-struct closure_with_waitlist_and_timer {
- struct closure cl;
- struct closure_waitlist wait;
- struct timer_list timer;
-};
-
extern unsigned invalid_closure_type(void);
#define __CLOSURE_TYPE(cl, _t) \
@@ -289,14 +252,11 @@
( \
__CLOSURE_TYPE(cl, closure) \
__CLOSURE_TYPE(cl, closure_with_waitlist) \
- __CLOSURE_TYPE(cl, closure_with_timer) \
- __CLOSURE_TYPE(cl, closure_with_waitlist_and_timer) \
invalid_closure_type() \
)
void closure_sub(struct closure *cl, int v);
void closure_put(struct closure *cl);
-void closure_queue(struct closure *cl);
void __closure_wake_up(struct closure_waitlist *list);
bool closure_wait(struct closure_waitlist *list, struct closure *cl);
void closure_sync(struct closure *cl);
@@ -305,12 +265,6 @@
void __closure_lock(struct closure *cl, struct closure *parent,
struct closure_waitlist *wait_list);
-void do_closure_timer_init(struct closure *cl);
-bool __closure_delay(struct closure *cl, unsigned long delay,
- struct timer_list *timer);
-void __closure_flush(struct closure *cl, struct timer_list *timer);
-void __closure_flush_sync(struct closure *cl, struct timer_list *timer);
-
#ifdef CONFIG_BCACHE_CLOSURES_DEBUG
void closure_debug_init(void);
@@ -354,11 +308,6 @@
atomic_sub(CLOSURE_RUNNING, &cl->remaining);
}
-static inline bool closure_is_stopped(struct closure *cl)
-{
- return !(atomic_read(&cl->remaining) & CLOSURE_RUNNING);
-}
-
static inline bool closure_is_unlocked(struct closure *cl)
{
return atomic_read(&cl->remaining) == -1;
@@ -367,14 +316,6 @@
static inline void do_closure_init(struct closure *cl, struct closure *parent,
bool running)
{
- switch (cl->type) {
- case TYPE_closure_with_timer:
- case TYPE_closure_with_waitlist_and_timer:
- do_closure_timer_init(cl);
- default:
- break;
- }
-
cl->parent = parent;
if (parent)
closure_get(parent);
@@ -429,8 +370,7 @@
static inline void closure_init_stack(struct closure *cl)
{
memset(cl, 0, sizeof(struct closure));
- atomic_set(&cl->remaining, CLOSURE_REMAINING_INITIALIZER|
- CLOSURE_BLOCKING|CLOSURE_STACK);
+ atomic_set(&cl->remaining, CLOSURE_REMAINING_INITIALIZER|CLOSURE_STACK);
}
/**
@@ -461,24 +401,6 @@
#define closure_lock(cl, parent) \
__closure_lock(__to_internal_closure(cl), parent, &(cl)->wait)
-/**
- * closure_delay() - delay some number of jiffies
- * @cl: the closure that will sleep
- * @delay: the delay in jiffies
- *
- * Takes a refcount on @cl which will be released after @delay jiffies; this may
- * be used to have a function run after a delay with continue_at(), or
- * closure_sync() may be used for a convoluted version of msleep().
- */
-#define closure_delay(cl, delay) \
- __closure_delay(__to_internal_closure(cl), delay, &(cl)->timer)
-
-#define closure_flush(cl) \
- __closure_flush(__to_internal_closure(cl), &(cl)->timer)
-
-#define closure_flush_sync(cl) \
- __closure_flush_sync(__to_internal_closure(cl), &(cl)->timer)
-
static inline void __closure_end_sleep(struct closure *cl)
{
__set_current_state(TASK_RUNNING);
@@ -498,40 +420,6 @@
}
/**
- * closure_blocking() - returns true if the closure is in blocking mode.
- *
- * If a closure is in blocking mode, closure_wait_event() will sleep until the
- * condition is true instead of waiting asynchronously.
- */
-static inline bool closure_blocking(struct closure *cl)
-{
- return atomic_read(&cl->remaining) & CLOSURE_BLOCKING;
-}
-
-/**
- * set_closure_blocking() - put a closure in blocking mode.
- *
- * If a closure is in blocking mode, closure_wait_event() will sleep until the
- * condition is true instead of waiting asynchronously.
- *
- * Not thread safe - can only be called by the thread running the closure.
- */
-static inline void set_closure_blocking(struct closure *cl)
-{
- if (!closure_blocking(cl))
- atomic_add(CLOSURE_BLOCKING, &cl->remaining);
-}
-
-/*
- * Not thread safe - can only be called by the thread running the closure.
- */
-static inline void clear_closure_blocking(struct closure *cl)
-{
- if (closure_blocking(cl))
- atomic_sub(CLOSURE_BLOCKING, &cl->remaining);
-}
-
-/**
* closure_wake_up() - wake up all closures on a wait list.
*/
static inline void closure_wake_up(struct closure_waitlist *list)
@@ -561,63 +449,36 @@
* refcount on our closure. If this was a stack allocated closure, that would be
* bad.
*/
-#define __closure_wait_event(list, cl, condition, _block) \
+#define closure_wait_event(list, cl, condition) \
({ \
- bool block = _block; \
typeof(condition) ret; \
\
while (1) { \
ret = (condition); \
if (ret) { \
__closure_wake_up(list); \
- if (block) \
- closure_sync(cl); \
- \
+ closure_sync(cl); \
break; \
} \
\
- if (block) \
- __closure_start_sleep(cl); \
+ __closure_start_sleep(cl); \
\
- if (!closure_wait(list, cl)) { \
- if (!block) \
- break; \
- \
+ if (!closure_wait(list, cl)) \
schedule(); \
- } \
} \
\
ret; \
})
-/**
- * closure_wait_event() - wait on a condition, synchronously or asynchronously.
- * @list: the wait list to wait on
- * @cl: the closure that is doing the waiting
- * @condition: a C expression for the event to wait for
- *
- * If the closure is in blocking mode, sleeps until the @condition evaluates to
- * true - exactly like wait_event().
- *
- * If the closure is not in blocking mode, waits asynchronously; if the
- * condition is currently false the @cl is put onto @list and returns. @list
- * owns a refcount on @cl; closure_sync() or continue_at() may be used later to
- * wait for another thread to wake up @list, which drops the refcount on @cl.
- *
- * Returns the value of @condition; @cl will be on @list iff @condition was
- * false.
- *
- * closure_wake_up(@list) must be called after changing any variable that could
- * cause @condition to become true.
- */
-#define closure_wait_event(list, cl, condition) \
- __closure_wait_event(list, cl, condition, closure_blocking(cl))
-
-#define closure_wait_event_async(list, cl, condition) \
- __closure_wait_event(list, cl, condition, false)
-
-#define closure_wait_event_sync(list, cl, condition) \
- __closure_wait_event(list, cl, condition, true)
+static inline void closure_queue(struct closure *cl)
+{
+ struct workqueue_struct *wq = cl->wq;
+ if (wq) {
+ INIT_WORK(&cl->work, cl->work.func);
+ BUG_ON(!queue_work(wq, &cl->work));
+ } else
+ cl->fn(cl);
+}
static inline void set_closure_fn(struct closure *cl, closure_fn *fn,
struct workqueue_struct *wq)