rt2x00: Update rt2800 register definitions towards latest definitions.
Definitions taken from the latest rt2860 / rt2870 / rt3070 / rt3090 Ralink
vendor drivers.
Signed-off-by: Gertjan van Wingerde <gwingerde@gmail.com>
Acked-by: Ivo van Doorn <IvDoorn@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
diff --git a/drivers/net/wireless/rt2x00/rt2800.h b/drivers/net/wireless/rt2x00/rt2800.h
index 74c0433..455dc3f 100644
--- a/drivers/net/wireless/rt2x00/rt2800.h
+++ b/drivers/net/wireless/rt2x00/rt2800.h
@@ -56,6 +56,7 @@
#define RF3021 0x0007
#define RF3022 0x0008
#define RF3052 0x0009
+#define RF3320 0x000b
/*
* Chipset version.
@@ -90,10 +91,16 @@
#define NUM_TX_QUEUES 4
/*
- * USB registers.
+ * Registers.
*/
/*
+ * OPT_14: Unknown register used by rt3xxx devices.
+ */
+#define OPT_14_CSR 0x0114
+#define OPT_14_CSR_BIT0 FIELD32(0x00000001)
+
+/*
* INT_SOURCE_CSR: Interrupt source register.
* Write one to clear corresponding bit.
* TX_FIFO_STATUS: FIFO Statistics is full, sw should read 0x171c
@@ -398,6 +405,31 @@
#define EFUSE_DATA3 0x059c
/*
+ * LDO_CFG0
+ */
+#define LDO_CFG0 0x05d4
+#define LDO_CFG0_DELAY3 FIELD32(0x000000ff)
+#define LDO_CFG0_DELAY2 FIELD32(0x0000ff00)
+#define LDO_CFG0_DELAY1 FIELD32(0x00ff0000)
+#define LDO_CFG0_BGSEL FIELD32(0x03000000)
+#define LDO_CFG0_LDO_CORE_VLEVEL FIELD32(0x1c000000)
+#define LD0_CFG0_LDO25_LEVEL FIELD32(0x60000000)
+#define LDO_CFG0_LDO25_LARGEA FIELD32(0x80000000)
+
+/*
+ * GPIO_SWITCH
+ */
+#define GPIO_SWITCH 0x05dc
+#define GPIO_SWITCH_0 FIELD32(0x00000001)
+#define GPIO_SWITCH_1 FIELD32(0x00000002)
+#define GPIO_SWITCH_2 FIELD32(0x00000004)
+#define GPIO_SWITCH_3 FIELD32(0x00000008)
+#define GPIO_SWITCH_4 FIELD32(0x00000010)
+#define GPIO_SWITCH_5 FIELD32(0x00000020)
+#define GPIO_SWITCH_6 FIELD32(0x00000040)
+#define GPIO_SWITCH_7 FIELD32(0x00000080)
+
+/*
* MAC Control/Status Registers(CSR).
* Some values are set in TU, whereas 1 TU == 1024 us.
*/
@@ -1492,6 +1524,14 @@
#define BBP4_BANDWIDTH FIELD8(0x18)
/*
+ * BBP 138: Unknown
+ */
+#define BBP138_RX_ADC1 FIELD8(0x02)
+#define BBP138_RX_ADC2 FIELD8(0x04)
+#define BBP138_TX_DAC1 FIELD8(0x20)
+#define BBP138_TX_DAC2 FIELD8(0x40)
+
+/*
* RFCSR registers
* The wordsize of the RFCSR is 8 bits.
*/
@@ -1499,7 +1539,8 @@
/*
* RFCSR 6:
*/
-#define RFCSR6_R FIELD8(0x03)
+#define RFCSR6_R1 FIELD8(0x03)
+#define RFCSR6_R2 FIELD8(0x40)
/*
* RFCSR 7:
@@ -1512,6 +1553,14 @@
#define RFCSR12_TX_POWER FIELD8(0x1f)
/*
+ * RFCSR 17:
+ */
+#define RFCSR17_R1 FIELD8(0x07)
+#define RFCSR17_R2 FIELD8(0x08)
+#define RFCSR17_R3 FIELD8(0x20)
+
+
+/*
* RFCSR 22:
*/
#define RFCSR22_BASEBAND_LOOPBACK FIELD8(0x01)
@@ -1603,6 +1652,8 @@
#define EEPROM_NIC_WPS_PBC FIELD16(0x0080)
#define EEPROM_NIC_BW40M_BG FIELD16(0x0100)
#define EEPROM_NIC_BW40M_A FIELD16(0x0200)
+#define EEPROM_NIC_ANT_DIVERSITY FIELD16(0x0800)
+#define EEPROM_NIC_DAC_TEST FIELD16(0x8000)
/*
* EEPROM frequency
diff --git a/drivers/net/wireless/rt2x00/rt2800lib.c b/drivers/net/wireless/rt2x00/rt2800lib.c
index 6fdec15..394c8e4 100644
--- a/drivers/net/wireless/rt2x00/rt2800lib.c
+++ b/drivers/net/wireless/rt2x00/rt2800lib.c
@@ -797,7 +797,7 @@
rt2800_rfcsr_write(rt2x00dev, 3, rf->rf3);
rt2800_rfcsr_read(rt2x00dev, 6, &rfcsr);
- rt2x00_set_field8(&rfcsr, RFCSR6_R, rf->rf2);
+ rt2x00_set_field8(&rfcsr, RFCSR6_R1, rf->rf2);
rt2800_rfcsr_write(rt2x00dev, 6, rfcsr);
rt2800_rfcsr_read(rt2x00dev, 12, &rfcsr);