| /* |
| * Copyright (C) ST-Ericsson SA 2010 |
| * |
| * License Terms: GNU General Public License, version 2 |
| * Author: Hanumath Prasad <hanumath.prasad@stericsson.com> for ST-Ericsson |
| * Author: Rabin Vincent <rabin.vincent@stericsson.com> for ST-Ericsson |
| */ |
| |
| #include <linux/module.h> |
| #include <linux/interrupt.h> |
| #include <linux/irq.h> |
| #include <linux/slab.h> |
| #include <linux/i2c.h> |
| #include <linux/mfd/core.h> |
| #include <linux/mfd/tc3589x.h> |
| |
| #define TC3589x_CLKMODE_MODCTL_SLEEP 0x0 |
| #define TC3589x_CLKMODE_MODCTL_OPERATION (1 << 0) |
| |
| /** |
| * tc3589x_reg_read() - read a single TC3589x register |
| * @tc3589x: Device to read from |
| * @reg: Register to read |
| */ |
| int tc3589x_reg_read(struct tc3589x *tc3589x, u8 reg) |
| { |
| int ret; |
| |
| ret = i2c_smbus_read_byte_data(tc3589x->i2c, reg); |
| if (ret < 0) |
| dev_err(tc3589x->dev, "failed to read reg %#x: %d\n", |
| reg, ret); |
| |
| return ret; |
| } |
| EXPORT_SYMBOL_GPL(tc3589x_reg_read); |
| |
| /** |
| * tc3589x_reg_read() - write a single TC3589x register |
| * @tc3589x: Device to write to |
| * @reg: Register to read |
| * @data: Value to write |
| */ |
| int tc3589x_reg_write(struct tc3589x *tc3589x, u8 reg, u8 data) |
| { |
| int ret; |
| |
| ret = i2c_smbus_write_byte_data(tc3589x->i2c, reg, data); |
| if (ret < 0) |
| dev_err(tc3589x->dev, "failed to write reg %#x: %d\n", |
| reg, ret); |
| |
| return ret; |
| } |
| EXPORT_SYMBOL_GPL(tc3589x_reg_write); |
| |
| /** |
| * tc3589x_block_read() - read multiple TC3589x registers |
| * @tc3589x: Device to read from |
| * @reg: First register |
| * @length: Number of registers |
| * @values: Buffer to write to |
| */ |
| int tc3589x_block_read(struct tc3589x *tc3589x, u8 reg, u8 length, u8 *values) |
| { |
| int ret; |
| |
| ret = i2c_smbus_read_i2c_block_data(tc3589x->i2c, reg, length, values); |
| if (ret < 0) |
| dev_err(tc3589x->dev, "failed to read regs %#x: %d\n", |
| reg, ret); |
| |
| return ret; |
| } |
| EXPORT_SYMBOL_GPL(tc3589x_block_read); |
| |
| /** |
| * tc3589x_block_write() - write multiple TC3589x registers |
| * @tc3589x: Device to write to |
| * @reg: First register |
| * @length: Number of registers |
| * @values: Values to write |
| */ |
| int tc3589x_block_write(struct tc3589x *tc3589x, u8 reg, u8 length, |
| const u8 *values) |
| { |
| int ret; |
| |
| ret = i2c_smbus_write_i2c_block_data(tc3589x->i2c, reg, length, |
| values); |
| if (ret < 0) |
| dev_err(tc3589x->dev, "failed to write regs %#x: %d\n", |
| reg, ret); |
| |
| return ret; |
| } |
| EXPORT_SYMBOL_GPL(tc3589x_block_write); |
| |
| /** |
| * tc3589x_set_bits() - set the value of a bitfield in a TC3589x register |
| * @tc3589x: Device to write to |
| * @reg: Register to write |
| * @mask: Mask of bits to set |
| * @values: Value to set |
| */ |
| int tc3589x_set_bits(struct tc3589x *tc3589x, u8 reg, u8 mask, u8 val) |
| { |
| int ret; |
| |
| mutex_lock(&tc3589x->lock); |
| |
| ret = tc3589x_reg_read(tc3589x, reg); |
| if (ret < 0) |
| goto out; |
| |
| ret &= ~mask; |
| ret |= val; |
| |
| ret = tc3589x_reg_write(tc3589x, reg, ret); |
| |
| out: |
| mutex_unlock(&tc3589x->lock); |
| return ret; |
| } |
| EXPORT_SYMBOL_GPL(tc3589x_set_bits); |
| |
| static struct resource gpio_resources[] = { |
| { |
| .start = TC3589x_INT_GPIIRQ, |
| .end = TC3589x_INT_GPIIRQ, |
| .flags = IORESOURCE_IRQ, |
| }, |
| }; |
| |
| static struct resource keypad_resources[] = { |
| { |
| .start = TC3589x_INT_KBDIRQ, |
| .end = TC3589x_INT_KBDIRQ, |
| .flags = IORESOURCE_IRQ, |
| }, |
| }; |
| |
| static struct mfd_cell tc3589x_dev_gpio[] = { |
| { |
| .name = "tc3589x-gpio", |
| .num_resources = ARRAY_SIZE(gpio_resources), |
| .resources = &gpio_resources[0], |
| }, |
| }; |
| |
| static struct mfd_cell tc3589x_dev_keypad[] = { |
| { |
| .name = "tc3589x-keypad", |
| .num_resources = ARRAY_SIZE(keypad_resources), |
| .resources = &keypad_resources[0], |
| }, |
| }; |
| |
| static irqreturn_t tc3589x_irq(int irq, void *data) |
| { |
| struct tc3589x *tc3589x = data; |
| int status; |
| |
| again: |
| status = tc3589x_reg_read(tc3589x, TC3589x_IRQST); |
| if (status < 0) |
| return IRQ_NONE; |
| |
| while (status) { |
| int bit = __ffs(status); |
| |
| handle_nested_irq(tc3589x->irq_base + bit); |
| status &= ~(1 << bit); |
| } |
| |
| /* |
| * A dummy read or write (to any register) appears to be necessary to |
| * have the last interrupt clear (for example, GPIO IC write) take |
| * effect. In such a case, recheck for any interrupt which is still |
| * pending. |
| */ |
| status = tc3589x_reg_read(tc3589x, TC3589x_IRQST); |
| if (status) |
| goto again; |
| |
| return IRQ_HANDLED; |
| } |
| |
| static int tc3589x_irq_init(struct tc3589x *tc3589x) |
| { |
| int base = tc3589x->irq_base; |
| int irq; |
| |
| for (irq = base; irq < base + TC3589x_NR_INTERNAL_IRQS; irq++) { |
| irq_set_chip_data(irq, tc3589x); |
| irq_set_chip_and_handler(irq, &dummy_irq_chip, |
| handle_edge_irq); |
| irq_set_nested_thread(irq, 1); |
| #ifdef CONFIG_ARM |
| set_irq_flags(irq, IRQF_VALID); |
| #else |
| irq_set_noprobe(irq); |
| #endif |
| } |
| |
| return 0; |
| } |
| |
| static void tc3589x_irq_remove(struct tc3589x *tc3589x) |
| { |
| int base = tc3589x->irq_base; |
| int irq; |
| |
| for (irq = base; irq < base + TC3589x_NR_INTERNAL_IRQS; irq++) { |
| #ifdef CONFIG_ARM |
| set_irq_flags(irq, 0); |
| #endif |
| irq_set_chip_and_handler(irq, NULL, NULL); |
| irq_set_chip_data(irq, NULL); |
| } |
| } |
| |
| static int tc3589x_chip_init(struct tc3589x *tc3589x) |
| { |
| int manf, ver, ret; |
| |
| manf = tc3589x_reg_read(tc3589x, TC3589x_MANFCODE); |
| if (manf < 0) |
| return manf; |
| |
| ver = tc3589x_reg_read(tc3589x, TC3589x_VERSION); |
| if (ver < 0) |
| return ver; |
| |
| if (manf != TC3589x_MANFCODE_MAGIC) { |
| dev_err(tc3589x->dev, "unknown manufacturer: %#x\n", manf); |
| return -EINVAL; |
| } |
| |
| dev_info(tc3589x->dev, "manufacturer: %#x, version: %#x\n", manf, ver); |
| |
| /* |
| * Put everything except the IRQ module into reset; |
| * also spare the GPIO module for any pin initialization |
| * done during pre-kernel boot |
| */ |
| ret = tc3589x_reg_write(tc3589x, TC3589x_RSTCTRL, |
| TC3589x_RSTCTRL_TIMRST |
| | TC3589x_RSTCTRL_ROTRST |
| | TC3589x_RSTCTRL_KBDRST); |
| if (ret < 0) |
| return ret; |
| |
| /* Clear the reset interrupt. */ |
| return tc3589x_reg_write(tc3589x, TC3589x_RSTINTCLR, 0x1); |
| } |
| |
| static int __devinit tc3589x_device_init(struct tc3589x *tc3589x) |
| { |
| int ret = 0; |
| unsigned int blocks = tc3589x->pdata->block; |
| |
| if (blocks & TC3589x_BLOCK_GPIO) { |
| ret = mfd_add_devices(tc3589x->dev, -1, tc3589x_dev_gpio, |
| ARRAY_SIZE(tc3589x_dev_gpio), NULL, |
| tc3589x->irq_base); |
| if (ret) { |
| dev_err(tc3589x->dev, "failed to add gpio child\n"); |
| return ret; |
| } |
| dev_info(tc3589x->dev, "added gpio block\n"); |
| } |
| |
| if (blocks & TC3589x_BLOCK_KEYPAD) { |
| ret = mfd_add_devices(tc3589x->dev, -1, tc3589x_dev_keypad, |
| ARRAY_SIZE(tc3589x_dev_keypad), NULL, |
| tc3589x->irq_base); |
| if (ret) { |
| dev_err(tc3589x->dev, "failed to keypad child\n"); |
| return ret; |
| } |
| dev_info(tc3589x->dev, "added keypad block\n"); |
| } |
| |
| return ret; |
| } |
| |
| static int __devinit tc3589x_probe(struct i2c_client *i2c, |
| const struct i2c_device_id *id) |
| { |
| struct tc3589x_platform_data *pdata = i2c->dev.platform_data; |
| struct tc3589x *tc3589x; |
| int ret; |
| |
| if (!i2c_check_functionality(i2c->adapter, I2C_FUNC_SMBUS_BYTE_DATA |
| | I2C_FUNC_SMBUS_I2C_BLOCK)) |
| return -EIO; |
| |
| tc3589x = kzalloc(sizeof(struct tc3589x), GFP_KERNEL); |
| if (!tc3589x) |
| return -ENOMEM; |
| |
| mutex_init(&tc3589x->lock); |
| |
| tc3589x->dev = &i2c->dev; |
| tc3589x->i2c = i2c; |
| tc3589x->pdata = pdata; |
| tc3589x->irq_base = pdata->irq_base; |
| tc3589x->num_gpio = id->driver_data; |
| |
| i2c_set_clientdata(i2c, tc3589x); |
| |
| ret = tc3589x_chip_init(tc3589x); |
| if (ret) |
| goto out_free; |
| |
| ret = tc3589x_irq_init(tc3589x); |
| if (ret) |
| goto out_free; |
| |
| ret = request_threaded_irq(tc3589x->i2c->irq, NULL, tc3589x_irq, |
| IRQF_TRIGGER_FALLING | IRQF_ONESHOT, |
| "tc3589x", tc3589x); |
| if (ret) { |
| dev_err(tc3589x->dev, "failed to request IRQ: %d\n", ret); |
| goto out_removeirq; |
| } |
| |
| ret = tc3589x_device_init(tc3589x); |
| if (ret) { |
| dev_err(tc3589x->dev, "failed to add child devices\n"); |
| goto out_freeirq; |
| } |
| |
| return 0; |
| |
| out_freeirq: |
| free_irq(tc3589x->i2c->irq, tc3589x); |
| out_removeirq: |
| tc3589x_irq_remove(tc3589x); |
| out_free: |
| kfree(tc3589x); |
| return ret; |
| } |
| |
| static int __devexit tc3589x_remove(struct i2c_client *client) |
| { |
| struct tc3589x *tc3589x = i2c_get_clientdata(client); |
| |
| mfd_remove_devices(tc3589x->dev); |
| |
| free_irq(tc3589x->i2c->irq, tc3589x); |
| tc3589x_irq_remove(tc3589x); |
| |
| kfree(tc3589x); |
| |
| return 0; |
| } |
| |
| #ifdef CONFIG_PM |
| static int tc3589x_suspend(struct device *dev) |
| { |
| struct tc3589x *tc3589x = dev_get_drvdata(dev); |
| struct i2c_client *client = tc3589x->i2c; |
| int ret = 0; |
| |
| /* put the system to sleep mode */ |
| if (!device_may_wakeup(&client->dev)) |
| ret = tc3589x_reg_write(tc3589x, TC3589x_CLKMODE, |
| TC3589x_CLKMODE_MODCTL_SLEEP); |
| |
| return ret; |
| } |
| |
| static int tc3589x_resume(struct device *dev) |
| { |
| struct tc3589x *tc3589x = dev_get_drvdata(dev); |
| struct i2c_client *client = tc3589x->i2c; |
| int ret = 0; |
| |
| /* enable the system into operation */ |
| if (!device_may_wakeup(&client->dev)) |
| ret = tc3589x_reg_write(tc3589x, TC3589x_CLKMODE, |
| TC3589x_CLKMODE_MODCTL_OPERATION); |
| |
| return ret; |
| } |
| |
| static const SIMPLE_DEV_PM_OPS(tc3589x_dev_pm_ops, tc3589x_suspend, |
| tc3589x_resume); |
| #endif |
| |
| static const struct i2c_device_id tc3589x_id[] = { |
| { "tc3589x", 24 }, |
| { } |
| }; |
| MODULE_DEVICE_TABLE(i2c, tc3589x_id); |
| |
| static struct i2c_driver tc3589x_driver = { |
| .driver.name = "tc3589x", |
| .driver.owner = THIS_MODULE, |
| #ifdef CONFIG_PM |
| .driver.pm = &tc3589x_dev_pm_ops, |
| #endif |
| .probe = tc3589x_probe, |
| .remove = __devexit_p(tc3589x_remove), |
| .id_table = tc3589x_id, |
| }; |
| |
| static int __init tc3589x_init(void) |
| { |
| return i2c_add_driver(&tc3589x_driver); |
| } |
| subsys_initcall(tc3589x_init); |
| |
| static void __exit tc3589x_exit(void) |
| { |
| i2c_del_driver(&tc3589x_driver); |
| } |
| module_exit(tc3589x_exit); |
| |
| MODULE_LICENSE("GPL v2"); |
| MODULE_DESCRIPTION("TC3589x MFD core driver"); |
| MODULE_AUTHOR("Hanumath Prasad, Rabin Vincent"); |