| /* |
| * Freescale SPI/eSPI controller driver library. |
| * |
| * Maintainer: Kumar Gala |
| * |
| * Copyright (C) 2006 Polycom, Inc. |
| * |
| * CPM SPI and QE buffer descriptors mode support: |
| * Copyright (c) 2009 MontaVista Software, Inc. |
| * Author: Anton Vorontsov <avorontsov@ru.mvista.com> |
| * |
| * Copyright 2010 Freescale Semiconductor, Inc. |
| * |
| * This program is free software; you can redistribute it and/or modify it |
| * under the terms of the GNU General Public License as published by the |
| * Free Software Foundation; either version 2 of the License, or (at your |
| * option) any later version. |
| */ |
| #include <linux/dma-mapping.h> |
| #include <linux/fsl_devices.h> |
| #include <linux/interrupt.h> |
| #include <linux/kernel.h> |
| #include <linux/mm.h> |
| #include <linux/module.h> |
| #include <linux/of_platform.h> |
| #include <linux/spi/spi.h> |
| #ifdef CONFIG_FSL_SOC |
| #include <sysdev/fsl_soc.h> |
| #endif |
| |
| #include "spi-fsl-lib.h" |
| |
| #define MPC8XXX_SPI_RX_BUF(type) \ |
| void mpc8xxx_spi_rx_buf_##type(u32 data, struct mpc8xxx_spi *mpc8xxx_spi) \ |
| { \ |
| type *rx = mpc8xxx_spi->rx; \ |
| *rx++ = (type)(data >> mpc8xxx_spi->rx_shift); \ |
| mpc8xxx_spi->rx = rx; \ |
| } \ |
| EXPORT_SYMBOL_GPL(mpc8xxx_spi_rx_buf_##type); |
| |
| #define MPC8XXX_SPI_TX_BUF(type) \ |
| u32 mpc8xxx_spi_tx_buf_##type(struct mpc8xxx_spi *mpc8xxx_spi) \ |
| { \ |
| u32 data; \ |
| const type *tx = mpc8xxx_spi->tx; \ |
| if (!tx) \ |
| return 0; \ |
| data = *tx++ << mpc8xxx_spi->tx_shift; \ |
| mpc8xxx_spi->tx = tx; \ |
| return data; \ |
| } \ |
| EXPORT_SYMBOL_GPL(mpc8xxx_spi_tx_buf_##type); |
| |
| MPC8XXX_SPI_RX_BUF(u8) |
| MPC8XXX_SPI_RX_BUF(u16) |
| MPC8XXX_SPI_RX_BUF(u32) |
| MPC8XXX_SPI_TX_BUF(u8) |
| MPC8XXX_SPI_TX_BUF(u16) |
| MPC8XXX_SPI_TX_BUF(u32) |
| |
| struct mpc8xxx_spi_probe_info *to_of_pinfo(struct fsl_spi_platform_data *pdata) |
| { |
| return container_of(pdata, struct mpc8xxx_spi_probe_info, pdata); |
| } |
| EXPORT_SYMBOL_GPL(to_of_pinfo); |
| |
| const char *mpc8xxx_spi_strmode(unsigned int flags) |
| { |
| if (flags & SPI_QE_CPU_MODE) { |
| return "QE CPU"; |
| } else if (flags & SPI_CPM_MODE) { |
| if (flags & SPI_QE) |
| return "QE"; |
| else if (flags & SPI_CPM2) |
| return "CPM2"; |
| else |
| return "CPM1"; |
| } |
| return "CPU"; |
| } |
| EXPORT_SYMBOL_GPL(mpc8xxx_spi_strmode); |
| |
| void mpc8xxx_spi_probe(struct device *dev, struct resource *mem, |
| unsigned int irq) |
| { |
| struct fsl_spi_platform_data *pdata = dev_get_platdata(dev); |
| struct spi_master *master; |
| struct mpc8xxx_spi *mpc8xxx_spi; |
| |
| master = dev_get_drvdata(dev); |
| |
| /* the spi->mode bits understood by this driver: */ |
| master->mode_bits = SPI_CPOL | SPI_CPHA | SPI_CS_HIGH |
| | SPI_LSB_FIRST | SPI_LOOP; |
| |
| master->dev.of_node = dev->of_node; |
| |
| mpc8xxx_spi = spi_master_get_devdata(master); |
| mpc8xxx_spi->dev = dev; |
| mpc8xxx_spi->get_rx = mpc8xxx_spi_rx_buf_u8; |
| mpc8xxx_spi->get_tx = mpc8xxx_spi_tx_buf_u8; |
| mpc8xxx_spi->flags = pdata->flags; |
| mpc8xxx_spi->spibrg = pdata->sysclk; |
| mpc8xxx_spi->irq = irq; |
| |
| mpc8xxx_spi->rx_shift = 0; |
| mpc8xxx_spi->tx_shift = 0; |
| |
| master->bus_num = pdata->bus_num; |
| master->num_chipselect = pdata->max_chipselect; |
| |
| init_completion(&mpc8xxx_spi->done); |
| } |
| EXPORT_SYMBOL_GPL(mpc8xxx_spi_probe); |
| |
| int mpc8xxx_spi_remove(struct device *dev) |
| { |
| struct mpc8xxx_spi *mpc8xxx_spi; |
| struct spi_master *master; |
| |
| master = dev_get_drvdata(dev); |
| mpc8xxx_spi = spi_master_get_devdata(master); |
| |
| spi_unregister_master(master); |
| |
| free_irq(mpc8xxx_spi->irq, mpc8xxx_spi); |
| |
| if (mpc8xxx_spi->spi_remove) |
| mpc8xxx_spi->spi_remove(mpc8xxx_spi); |
| |
| return 0; |
| } |
| EXPORT_SYMBOL_GPL(mpc8xxx_spi_remove); |
| |
| int of_mpc8xxx_spi_probe(struct platform_device *ofdev) |
| { |
| struct device *dev = &ofdev->dev; |
| struct device_node *np = ofdev->dev.of_node; |
| struct mpc8xxx_spi_probe_info *pinfo; |
| struct fsl_spi_platform_data *pdata; |
| const void *prop; |
| int ret = -ENOMEM; |
| |
| pinfo = devm_kzalloc(&ofdev->dev, sizeof(*pinfo), GFP_KERNEL); |
| if (!pinfo) |
| return ret; |
| |
| pdata = &pinfo->pdata; |
| dev->platform_data = pdata; |
| |
| /* Allocate bus num dynamically. */ |
| pdata->bus_num = -1; |
| |
| #ifdef CONFIG_FSL_SOC |
| /* SPI controller is either clocked from QE or SoC clock. */ |
| pdata->sysclk = get_brgfreq(); |
| if (pdata->sysclk == -1) { |
| pdata->sysclk = fsl_get_sys_freq(); |
| if (pdata->sysclk == -1) |
| return -ENODEV; |
| } |
| #else |
| ret = of_property_read_u32(np, "clock-frequency", &pdata->sysclk); |
| if (ret) |
| return ret; |
| #endif |
| |
| prop = of_get_property(np, "mode", NULL); |
| if (prop && !strcmp(prop, "cpu-qe")) |
| pdata->flags = SPI_QE_CPU_MODE; |
| else if (prop && !strcmp(prop, "qe")) |
| pdata->flags = SPI_CPM_MODE | SPI_QE; |
| else if (of_device_is_compatible(np, "fsl,cpm2-spi")) |
| pdata->flags = SPI_CPM_MODE | SPI_CPM2; |
| else if (of_device_is_compatible(np, "fsl,cpm1-spi")) |
| pdata->flags = SPI_CPM_MODE | SPI_CPM1; |
| |
| return 0; |
| } |
| EXPORT_SYMBOL_GPL(of_mpc8xxx_spi_probe); |
| |
| MODULE_LICENSE("GPL"); |