[ARM] pxa: mmc: add 1st host controller support for pxa3xx
This patchis to add the first mmc controller support for pxa3xx.
It's valid for pxa3[0|1|2]0.
On zylonite, the first controller supports two slots, this patch
only support the first one right now.
Signed-off-by: Bridge Wu <bridge.wu@marvell.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
diff --git a/arch/arm/mach-pxa/zylonite_pxa300.c b/arch/arm/mach-pxa/zylonite_pxa300.c
index 1832bc3..cad92d4 100644
--- a/arch/arm/mach-pxa/zylonite_pxa300.c
+++ b/arch/arm/mach-pxa/zylonite_pxa300.c
@@ -88,6 +88,15 @@
GPIO4_2_KP_MKOUT_5,
GPIO5_2_KP_MKOUT_6,
GPIO6_2_KP_MKOUT_7,
+
+ /* MMC1 */
+ GPIO3_MMC1_DAT0,
+ GPIO4_MMC1_DAT1,
+ GPIO5_MMC1_DAT2,
+ GPIO6_MMC1_DAT3,
+ GPIO7_MMC1_CLK,
+ GPIO8_MMC1_CMD, /* CMD0 for slot 0 */
+ GPIO15_GPIO, /* CMD1 default as GPIO for slot 0 */
};
static mfp_cfg_t pxa300_mfp_cfg[] __initdata = {
@@ -174,6 +183,10 @@
/* GPIO pin assignment */
gpio_backlight = mfp_to_gpio(MFP_PIN_GPIO20);
+
+ /* MMC card detect & write protect for controller 0 */
+ zylonite_mmc_slot[0].gpio_cd = EXT_GPIO(0);
+ zylonite_mmc_slot[0].gpio_wp = EXT_GPIO(2);
}
if (cpu_is_pxa300()) {