Merge branch 'upstream-fixes'
diff --git a/Documentation/DocBook/Makefile b/Documentation/DocBook/Makefile
index 1c95588..2975291 100644
--- a/Documentation/DocBook/Makefile
+++ b/Documentation/DocBook/Makefile
@@ -9,7 +9,7 @@
DOCBOOKS := wanbook.xml z8530book.xml mcabook.xml videobook.xml \
kernel-hacking.xml kernel-locking.xml deviceiobook.xml \
procfs-guide.xml writing_usb_driver.xml \
- sis900.xml kernel-api.xml journal-api.xml lsm.xml usb.xml \
+ kernel-api.xml journal-api.xml lsm.xml usb.xml \
gadget.xml libata.xml mtdnand.xml librs.xml rapidio.xml
###
diff --git a/Documentation/DocBook/sis900.tmpl b/Documentation/DocBook/sis900.tmpl
deleted file mode 100644
index 6c2cbac..0000000
--- a/Documentation/DocBook/sis900.tmpl
+++ /dev/null
@@ -1,585 +0,0 @@
-<?xml version="1.0" encoding="UTF-8"?>
-<!DOCTYPE book PUBLIC "-//OASIS//DTD DocBook XML V4.1.2//EN"
- "http://www.oasis-open.org/docbook/xml/4.1.2/docbookx.dtd" []>
-
-<book id="SiS900Guide">
-
-<bookinfo>
-
-<title>SiS 900/7016 Fast Ethernet Device Driver</title>
-
-<authorgroup>
-<author>
-<firstname>Ollie</firstname>
-<surname>Lho</surname>
-</author>
-
-<author>
-<firstname>Lei Chun</firstname>
-<surname>Chang</surname>
-</author>
-</authorgroup>
-
-<edition>Document Revision: 0.3 for SiS900 driver v1.06 & v1.07</edition>
-<pubdate>November 16, 2000</pubdate>
-
-<copyright>
- <year>1999</year>
- <holder>Silicon Integrated System Corp.</holder>
-</copyright>
-
-<legalnotice>
- <para>
- This program is free software; you can redistribute it and/or modify
- it under the terms of the GNU General Public License as published by
- the Free Software Foundation; either version 2 of the License, or
- (at your option) any later version.
- </para>
-
- <para>
- This program is distributed in the hope that it will be useful,
- but WITHOUT ANY WARRANTY; without even the implied warranty of
- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- GNU General Public License for more details.
- </para>
-
- <para>
- You should have received a copy of the GNU General Public License
- along with this program; if not, write to the Free Software
- Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- </para>
-</legalnotice>
-
-<abstract>
-<para>
-This document gives some information on installation and usage of SiS 900/7016
-device driver under Linux.
-</para>
-</abstract>
-
-</bookinfo>
-
-<toc></toc>
-
-<chapter id="intro">
- <title>Introduction</title>
-
-<para>
-This document describes the revision 1.06 and 1.07 of SiS 900/7016 Fast Ethernet
-device driver under Linux. The driver is developed by Silicon Integrated
-System Corp. and distributed freely under the GNU General Public License (GPL).
-The driver can be compiled as a loadable module and used under Linux kernel
-version 2.2.x. (rev. 1.06)
-With minimal changes, the driver can also be used under 2.3.x and 2.4.x kernel
-(rev. 1.07), please see
-<xref linkend="install"/>. If you are intended to
-use the driver for earlier kernels, you are on your own.
-</para>
-
-<para>
-The driver is tested with usual TCP/IP applications including
-FTP, Telnet, Netscape etc. and is used constantly by the developers.
-</para>
-
-<para>
-Please send all comments/fixes/questions to
-<ulink url="mailto:lcchang@sis.com.tw">Lei-Chun Chang</ulink>.
-</para>
-</chapter>
-
-<chapter id="changes">
- <title>Changes</title>
-
-<para>
-Changes made in Revision 1.07
-
-<orderedlist>
-<listitem>
-<para>
-Separation of sis900.c and sis900.h in order to move most
-constant definition to sis900.h (many of those constants were
-corrected)
-</para>
-</listitem>
-
-<listitem>
-<para>
-Clean up PCI detection, the pci-scan from Donald Becker were not used,
-just simple pci_find_*.
-</para>
-</listitem>
-
-<listitem>
-<para>
-MII detection is modified to support multiple mii transceiver.
-</para>
-</listitem>
-
-<listitem>
-<para>
-Bugs in read_eeprom, mdio_* were removed.
-</para>
-</listitem>
-
-<listitem>
-<para>
-Lot of sis900 irrelevant comments were removed/changed and
-more comments were added to reflect the real situation.
-</para>
-</listitem>
-
-<listitem>
-<para>
-Clean up of physical/virtual address space mess in buffer
-descriptors.
-</para>
-</listitem>
-
-<listitem>
-<para>
-Better transmit/receive error handling.
-</para>
-</listitem>
-
-<listitem>
-<para>
-The driver now uses zero-copy single buffer management
-scheme to improve performance.
-</para>
-</listitem>
-
-<listitem>
-<para>
-Names of variables were changed to be more consistent.
-</para>
-</listitem>
-
-<listitem>
-<para>
-Clean up of auo-negotiation and timer code.
-</para>
-</listitem>
-
-<listitem>
-<para>
-Automatic detection and change of PHY on the fly.
-</para>
-</listitem>
-
-<listitem>
-<para>
-Bug in mac probing fixed.
-</para>
-</listitem>
-
-<listitem>
-<para>
-Fix 630E equalier problem by modifying the equalizer workaround rule.
-</para>
-</listitem>
-
-<listitem>
-<para>
-Support for ICS1893 10/100 Interated PHYceiver.
-</para>
-</listitem>
-
-<listitem>
-<para>
-Support for media select by ifconfig.
-</para>
-</listitem>
-
-<listitem>
-<para>
-Added kernel-doc extratable documentation.
-</para>
-</listitem>
-
-</orderedlist>
-</para>
-</chapter>
-
-<chapter id="tested">
- <title>Tested Environment</title>
-
-<para>
-This driver is developed on the following hardware
-
-<itemizedlist>
-<listitem>
-
-<para>
-Intel Celeron 500 with SiS 630 (rev 02) chipset
-</para>
-</listitem>
-<listitem>
-
-<para>
-SiS 900 (rev 01) and SiS 7016/7014 Fast Ethernet Card
-</para>
-</listitem>
-
-</itemizedlist>
-
-and tested with these software environments
-
-<itemizedlist>
-<listitem>
-
-<para>
-Red Hat Linux version 6.2
-</para>
-</listitem>
-<listitem>
-
-<para>
-Linux kernel version 2.4.0
-</para>
-</listitem>
-<listitem>
-
-<para>
-Netscape version 4.6
-</para>
-</listitem>
-<listitem>
-
-<para>
-NcFTP 3.0.0 beta 18
-</para>
-</listitem>
-<listitem>
-
-<para>
-Samba version 2.0.3
-</para>
-</listitem>
-
-</itemizedlist>
-
-</para>
-
-</chapter>
-
-<chapter id="files">
-<title>Files in This Package</title>
-
-<para>
-In the package you can find these files:
-</para>
-
-<para>
-<variablelist>
-
-<varlistentry>
-<term>sis900.c</term>
-<listitem>
-<para>
-Driver source file in C
-</para>
-</listitem>
-</varlistentry>
-
-<varlistentry>
-<term>sis900.h</term>
-<listitem>
-<para>
-Header file for sis900.c
-</para>
-</listitem>
-</varlistentry>
-
-<varlistentry>
-<term>sis900.sgml</term>
-<listitem>
-<para>
-DocBook SGML source of the document
-</para>
-</listitem>
-</varlistentry>
-
-<varlistentry>
-<term>sis900.txt</term>
-<listitem>
-<para>
-Driver document in plain text
-</para>
-</listitem>
-</varlistentry>
-
-</variablelist>
-</para>
-</chapter>
-
-<chapter id="install">
- <title>Installation</title>
-
-<para>
-Silicon Integrated System Corp. is cooperating closely with core Linux Kernel
-developers. The revisions of SiS 900 driver are distributed by the usuall channels
-for kernel tar files and patches. Those kernel tar files for official kernel and
-patches for kernel pre-release can be download at
-<ulink url="http://ftp.kernel.org/pub/linux/kernel/">official kernel ftp site</ulink>
-and its mirrors.
-The 1.06 revision can be found in kernel version later than 2.3.15 and pre-2.2.14,
-and 1.07 revision can be found in kernel version 2.4.0.
-If you have no prior experience in networking under Linux, please read
-<ulink url="http://www.tldp.org/">Ethernet HOWTO</ulink> and
-<ulink url="http://www.tldp.org/">Networking HOWTO</ulink> available from
-Linux Documentation Project (LDP).
-</para>
-
-<para>
-The driver is bundled in release later than 2.2.11 and 2.3.15 so this
-is the most easy case.
-Be sure you have the appropriate packages for compiling kernel source.
-Those packages are listed in Document/Changes in kernel source
-distribution. If you have to install the driver other than those bundled
-in kernel release, you should have your driver file
-<filename>sis900.c</filename> and <filename>sis900.h</filename>
-copied into <filename class="directory">/usr/src/linux/drivers/net/</filename> first.
-There are two alternative ways to install the driver
-</para>
-
-<sect1>
-<title>Building the driver as loadable module</title>
-
-<para>
-To build the driver as a loadable kernel module you have to reconfigure
-the kernel to activate network support by
-</para>
-
-<para><screen>
-make menuconfig
-</screen></para>
-
-<para>
-Choose <quote>Loadable module support ---></quote>,
-then select <quote>Enable loadable module support</quote>.
-</para>
-
-<para>
-Choose <quote>Network Device Support ---></quote>, select
-<quote>Ethernet (10 or 100Mbit)</quote>.
-Then select <quote>EISA, VLB, PCI and on board controllers</quote>,
-and choose <quote>SiS 900/7016 PCI Fast Ethernet Adapter support</quote>
-to <quote>M</quote>.
-</para>
-
-<para>
-After reconfiguring the kernel, you can make the driver module by
-</para>
-
-<para><screen>
-make modules
-</screen></para>
-
-<para>
-The driver should be compiled with no errors. After compiling the driver,
-the driver can be installed to proper place by
-</para>
-
-<para><screen>
-make modules_install
-</screen></para>
-
-<para>
-Load the driver into kernel by
-</para>
-
-<para><screen>
-insmod sis900
-</screen></para>
-
-<para>
-When loading the driver into memory, some information message can be view by
-</para>
-
-<para>
-<screen>
-dmesg
-</screen>
-
-or
-
-<screen>
-cat /var/log/message
-</screen>
-</para>
-
-<para>
-If the driver is loaded properly you will have messages similar to this:
-</para>
-
-<para><screen>
-sis900.c: v1.07.06 11/07/2000
-eth0: SiS 900 PCI Fast Ethernet at 0xd000, IRQ 10, 00:00:e8:83:7f:a4.
-eth0: SiS 900 Internal MII PHY transceiver found at address 1.
-eth0: Using SiS 900 Internal MII PHY as default
-</screen></para>
-
-<para>
-showing the version of the driver and the results of probing routine.
-</para>
-
-<para>
-Once the driver is loaded, network can be brought up by
-</para>
-
-<para><screen>
-/sbin/ifconfig eth0 IPADDR broadcast BROADCAST netmask NETMASK media TYPE
-</screen></para>
-
-<para>
-where IPADDR, BROADCAST, NETMASK are your IP address, broadcast address and
-netmask respectively. TYPE is used to set medium type used by the device.
-Typical values are "10baseT"(twisted-pair 10Mbps Ethernet) or "100baseT"
-(twisted-pair 100Mbps Ethernet). For more information on how to configure
-network interface, please refer to
-<ulink url="http://www.tldp.org/">Networking HOWTO</ulink>.
-</para>
-
-<para>
-The link status is also shown by kernel messages. For example, after the
-network interface is activated, you may have the message:
-</para>
-
-<para><screen>
-eth0: Media Link On 100mbps full-duplex
-</screen></para>
-
-<para>
-If you try to unplug the twist pair (TP) cable you will get
-</para>
-
-<para><screen>
-eth0: Media Link Off
-</screen></para>
-
-<para>
-indicating that the link is failed.
-</para>
-</sect1>
-
-<sect1>
-<title>Building the driver into kernel</title>
-
-<para>
-If you want to make the driver into kernel, choose <quote>Y</quote>
-rather than <quote>M</quote> on
-<quote>SiS 900/7016 PCI Fast Ethernet Adapter support</quote>
-when configuring the kernel. Build the kernel image in the usual way
-</para>
-
-<para><screen>
-make clean
-
-make bzlilo
-</screen></para>
-
-<para>
-Next time the system reboot, you have the driver in memory.
-</para>
-
-</sect1>
-</chapter>
-
-<chapter id="problems">
- <title>Known Problems and Bugs</title>
-
-<para>
-There are some known problems and bugs. If you find any other bugs please
-mail to <ulink url="mailto:lcchang@sis.com.tw">lcchang@sis.com.tw</ulink>
-
-<orderedlist>
-
-<listitem>
-<para>
-AM79C901 HomePNA PHY is not thoroughly tested, there may be some
-bugs in the <quote>on the fly</quote> change of transceiver.
-</para>
-</listitem>
-
-<listitem>
-<para>
-A bug is hidden somewhere in the receive buffer management code,
-the bug causes NULL pointer reference in the kernel. This fault is
-caught before bad things happen and reported with the message:
-
-<computeroutput>
-eth0: NULL pointer encountered in Rx ring, skipping
-</computeroutput>
-
-which can be viewed with <literal remap="tt">dmesg</literal> or
-<literal remap="tt">cat /var/log/message</literal>.
-</para>
-</listitem>
-
-<listitem>
-<para>
-The media type change from 10Mbps to 100Mbps twisted-pair ethernet
-by ifconfig causes the media link down.
-</para>
-</listitem>
-
-</orderedlist>
-</para>
-</chapter>
-
-<chapter id="RHistory">
- <title>Revision History</title>
-
-<para>
-<itemizedlist>
-
-<listitem>
-<para>
-November 13, 2000, Revision 1.07, seventh release, 630E problem fixed
-and further clean up.
-</para>
-</listitem>
-
-<listitem>
-<para>
-November 4, 1999, Revision 1.06, Second release, lots of clean up
-and optimization.
-</para>
-</listitem>
-
-<listitem>
-<para>
-August 8, 1999, Revision 1.05, Initial Public Release
-</para>
-</listitem>
-
-</itemizedlist>
-</para>
-</chapter>
-
-<chapter id="acknowledgements">
- <title>Acknowledgements</title>
-
-<para>
-This driver was originally derived form
-<ulink url="mailto:becker@cesdis1.gsfc.nasa.gov">Donald Becker</ulink>'s
-<ulink url="ftp://cesdis.gsfc.nasa.gov/pub/linux/drivers/kern-2.3/pci-skeleton.c"
->pci-skeleton</ulink> and
-<ulink url="ftp://cesdis.gsfc.nasa.gov/pub/linux/drivers/kern-2.3/rtl8139.c"
->rtl8139</ulink> drivers. Donald also provided various suggestion
-regarded with improvements made in revision 1.06.
-</para>
-
-<para>
-The 1.05 revision was created by
-<ulink url="mailto:cmhuang@sis.com.tw">Jim Huang</ulink>, AMD 79c901
-support was added by <ulink url="mailto:lcs@sis.com.tw">Chin-Shan Li</ulink>.
-</para>
-</chapter>
-
-<chapter id="functions">
-<title>List of Functions</title>
-!Idrivers/net/sis900.c
-</chapter>
-
-</book>
diff --git a/Documentation/feature-removal-schedule.txt b/Documentation/feature-removal-schedule.txt
index be5ae60..975e14e 100644
--- a/Documentation/feature-removal-schedule.txt
+++ b/Documentation/feature-removal-schedule.txt
@@ -151,6 +151,13 @@
---------------------------
+What: eepro100 network driver
+When: January 2007
+Why: replaced by the e100 driver
+Who: Adrian Bunk <bunk@stusta.de>
+
+---------------------------
+
What: Legacy /proc/pci interface (PCI_LEGACY_PROC)
When: March 2006
Why: deprecated since 2.5.53 in favor of lspci(8)
diff --git a/Documentation/networking/00-INDEX b/Documentation/networking/00-INDEX
index 5b01d5c..b1181ce 100644
--- a/Documentation/networking/00-INDEX
+++ b/Documentation/networking/00-INDEX
@@ -92,8 +92,6 @@
- the new routing mechanism
shaper.txt
- info on the module that can shape/limit transmitted traffic.
-sis900.txt
- - SiS 900/7016 Fast Ethernet device driver info.
sk98lin.txt
- Marvell Yukon Chipset / SysKonnect SK-98xx compliant Gigabit
Ethernet Adapter family driver info
diff --git a/Documentation/networking/sis900.txt b/Documentation/networking/sis900.txt
deleted file mode 100644
index bddffd7..0000000
--- a/Documentation/networking/sis900.txt
+++ /dev/null
@@ -1,257 +0,0 @@
-
-SiS 900/7016 Fast Ethernet Device Driver
-
-Ollie Lho
-
-Lei Chun Chang
-
- Copyright © 1999 by Silicon Integrated System Corp.
-
- This document gives some information on installation and usage of SiS
- 900/7016 device driver under Linux.
-
- This program is free software; you can redistribute it and/or modify
- it under the terms of the GNU General Public License as published by
- the Free Software Foundation; either version 2 of the License, or (at
- your option) any later version.
-
- This program is distributed in the hope that it will be useful, but
- WITHOUT ANY WARRANTY; without even the implied warranty of
- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
- General Public License for more details.
-
- You should have received a copy of the GNU General Public License
- along with this program; if not, write to the Free Software
- Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307
- USA
- _________________________________________________________________
-
- Table of Contents
- 1. Introduction
- 2. Changes
- 3. Tested Environment
- 4. Files in This Package
- 5. Installation
-
- Building the driver as loadable module
- Building the driver into kernel
-
- 6. Known Problems and Bugs
- 7. Revision History
- 8. Acknowledgements
- _________________________________________________________________
-
-Chapter 1. Introduction
-
- This document describes the revision 1.06 and 1.07 of SiS 900/7016
- Fast Ethernet device driver under Linux. The driver is developed by
- Silicon Integrated System Corp. and distributed freely under the GNU
- General Public License (GPL). The driver can be compiled as a loadable
- module and used under Linux kernel version 2.2.x. (rev. 1.06) With
- minimal changes, the driver can also be used under 2.3.x and 2.4.x
- kernel (rev. 1.07), please see Chapter 5. If you are intended to use
- the driver for earlier kernels, you are on your own.
-
- The driver is tested with usual TCP/IP applications including FTP,
- Telnet, Netscape etc. and is used constantly by the developers.
-
- Please send all comments/fixes/questions to Lei-Chun Chang.
- _________________________________________________________________
-
-Chapter 2. Changes
-
- Changes made in Revision 1.07
-
- 1. Separation of sis900.c and sis900.h in order to move most constant
- definition to sis900.h (many of those constants were corrected)
- 2. Clean up PCI detection, the pci-scan from Donald Becker were not
- used, just simple pci_find_*.
- 3. MII detection is modified to support multiple mii transceiver.
- 4. Bugs in read_eeprom, mdio_* were removed.
- 5. Lot of sis900 irrelevant comments were removed/changed and more
- comments were added to reflect the real situation.
- 6. Clean up of physical/virtual address space mess in buffer
- descriptors.
- 7. Better transmit/receive error handling.
- 8. The driver now uses zero-copy single buffer management scheme to
- improve performance.
- 9. Names of variables were changed to be more consistent.
- 10. Clean up of auo-negotiation and timer code.
- 11. Automatic detection and change of PHY on the fly.
- 12. Bug in mac probing fixed.
- 13. Fix 630E equalier problem by modifying the equalizer workaround
- rule.
- 14. Support for ICS1893 10/100 Interated PHYceiver.
- 15. Support for media select by ifconfig.
- 16. Added kernel-doc extratable documentation.
- _________________________________________________________________
-
-Chapter 3. Tested Environment
-
- This driver is developed on the following hardware
-
- * Intel Celeron 500 with SiS 630 (rev 02) chipset
- * SiS 900 (rev 01) and SiS 7016/7014 Fast Ethernet Card
-
- and tested with these software environments
-
- * Red Hat Linux version 6.2
- * Linux kernel version 2.4.0
- * Netscape version 4.6
- * NcFTP 3.0.0 beta 18
- * Samba version 2.0.3
- _________________________________________________________________
-
-Chapter 4. Files in This Package
-
- In the package you can find these files:
-
- sis900.c
- Driver source file in C
-
- sis900.h
- Header file for sis900.c
-
- sis900.sgml
- DocBook SGML source of the document
-
- sis900.txt
- Driver document in plain text
- _________________________________________________________________
-
-Chapter 5. Installation
-
- Silicon Integrated System Corp. is cooperating closely with core Linux
- Kernel developers. The revisions of SiS 900 driver are distributed by
- the usuall channels for kernel tar files and patches. Those kernel tar
- files for official kernel and patches for kernel pre-release can be
- download at official kernel ftp site and its mirrors. The 1.06
- revision can be found in kernel version later than 2.3.15 and
- pre-2.2.14, and 1.07 revision can be found in kernel version 2.4.0. If
- you have no prior experience in networking under Linux, please read
- Ethernet HOWTO and Networking HOWTO available from Linux Documentation
- Project (LDP).
-
- The driver is bundled in release later than 2.2.11 and 2.3.15 so this
- is the most easy case. Be sure you have the appropriate packages for
- compiling kernel source. Those packages are listed in Document/Changes
- in kernel source distribution. If you have to install the driver other
- than those bundled in kernel release, you should have your driver file
- sis900.c and sis900.h copied into /usr/src/linux/drivers/net/ first.
- There are two alternative ways to install the driver
- _________________________________________________________________
-
-Building the driver as loadable module
-
- To build the driver as a loadable kernel module you have to
- reconfigure the kernel to activate network support by
-
-make menuconfig
-
- Choose "Loadable module support --->", then select "Enable loadable
- module support".
-
- Choose "Network Device Support --->", select "Ethernet (10 or
- 100Mbit)". Then select "EISA, VLB, PCI and on board controllers", and
- choose "SiS 900/7016 PCI Fast Ethernet Adapter support" to "M".
-
- After reconfiguring the kernel, you can make the driver module by
-
-make modules
-
- The driver should be compiled with no errors. After compiling the
- driver, the driver can be installed to proper place by
-
-make modules_install
-
- Load the driver into kernel by
-
-insmod sis900
-
- When loading the driver into memory, some information message can be
- view by
-
-dmesg
-
- or
-cat /var/log/message
-
- If the driver is loaded properly you will have messages similar to
- this:
-
-sis900.c: v1.07.06 11/07/2000
-eth0: SiS 900 PCI Fast Ethernet at 0xd000, IRQ 10, 00:00:e8:83:7f:a4.
-eth0: SiS 900 Internal MII PHY transceiver found at address 1.
-eth0: Using SiS 900 Internal MII PHY as default
-
- showing the version of the driver and the results of probing routine.
-
- Once the driver is loaded, network can be brought up by
-
-/sbin/ifconfig eth0 IPADDR broadcast BROADCAST netmask NETMASK media TYPE
-
- where IPADDR, BROADCAST, NETMASK are your IP address, broadcast
- address and netmask respectively. TYPE is used to set medium type used
- by the device. Typical values are "10baseT"(twisted-pair 10Mbps
- Ethernet) or "100baseT" (twisted-pair 100Mbps Ethernet). For more
- information on how to configure network interface, please refer to
- Networking HOWTO.
-
- The link status is also shown by kernel messages. For example, after
- the network interface is activated, you may have the message:
-
-eth0: Media Link On 100mbps full-duplex
-
- If you try to unplug the twist pair (TP) cable you will get
-
-eth0: Media Link Off
-
- indicating that the link is failed.
- _________________________________________________________________
-
-Building the driver into kernel
-
- If you want to make the driver into kernel, choose "Y" rather than "M"
- on "SiS 900/7016 PCI Fast Ethernet Adapter support" when configuring
- the kernel. Build the kernel image in the usual way
-
-make clean
-
-make bzlilo
-
- Next time the system reboot, you have the driver in memory.
- _________________________________________________________________
-
-Chapter 6. Known Problems and Bugs
-
- There are some known problems and bugs. If you find any other bugs
- please mail to lcchang@sis.com.tw
-
- 1. AM79C901 HomePNA PHY is not thoroughly tested, there may be some
- bugs in the "on the fly" change of transceiver.
- 2. A bug is hidden somewhere in the receive buffer management code,
- the bug causes NULL pointer reference in the kernel. This fault is
- caught before bad things happen and reported with the message:
- eth0: NULL pointer encountered in Rx ring, skipping which can be
- viewed with dmesg or cat /var/log/message.
- 3. The media type change from 10Mbps to 100Mbps twisted-pair ethernet
- by ifconfig causes the media link down.
- _________________________________________________________________
-
-Chapter 7. Revision History
-
- * November 13, 2000, Revision 1.07, seventh release, 630E problem
- fixed and further clean up.
- * November 4, 1999, Revision 1.06, Second release, lots of clean up
- and optimization.
- * August 8, 1999, Revision 1.05, Initial Public Release
- _________________________________________________________________
-
-Chapter 8. Acknowledgements
-
- This driver was originally derived form Donald Becker's pci-skeleton
- and rtl8139 drivers. Donald also provided various suggestion regarded
- with improvements made in revision 1.06.
-
- The 1.05 revision was created by Jim Huang, AMD 79c901 support was
- added by Chin-Shan Li.
diff --git a/arch/ppc/platforms/hdpu.c b/arch/ppc/platforms/hdpu.c
index 50039a2..f945416 100644
--- a/arch/ppc/platforms/hdpu.c
+++ b/arch/ppc/platforms/hdpu.c
@@ -319,11 +319,10 @@
struct mv643xx_eth_platform_data *eth_pd;
eth_pd = pd->dev.platform_data;
- eth_pd->port_serial_control =
- mv64x60_read(&bh, MV643XX_ETH_PORT_SERIAL_CONTROL_REG(pd->id) & ~1);
-
eth_pd->force_phy_addr = 1;
eth_pd->phy_addr = pd->id;
+ eth_pd->speed = SPEED_100;
+ eth_pd->duplex = DUPLEX_FULL;
eth_pd->tx_queue_size = 400;
eth_pd->rx_queue_size = 800;
}
diff --git a/drivers/net/3c523.c b/drivers/net/3c523.c
index 9e1fe2e..b40885d4 100644
--- a/drivers/net/3c523.c
+++ b/drivers/net/3c523.c
@@ -105,6 +105,7 @@
#include <linux/mca-legacy.h>
#include <linux/ethtool.h>
#include <linux/bitops.h>
+#include <linux/jiffies.h>
#include <asm/uaccess.h>
#include <asm/processor.h>
@@ -658,7 +659,7 @@
s = jiffies; /* warning: only active with interrupts on !! */
while (!(cfg_cmd->cmd_status & STAT_COMPL)) {
- if (jiffies - s > 30*HZ/100)
+ if (time_after(jiffies, s + 30*HZ/100))
break;
}
@@ -684,7 +685,7 @@
s = jiffies;
while (!(ias_cmd->cmd_status & STAT_COMPL)) {
- if (jiffies - s > 30*HZ/100)
+ if (time_after(jiffies, s + 30*HZ/100))
break;
}
@@ -709,7 +710,7 @@
s = jiffies;
while (!(tdr_cmd->cmd_status & STAT_COMPL)) {
- if (jiffies - s > 30*HZ/100) {
+ if (time_after(jiffies, s + 30*HZ/100)) {
printk(KERN_WARNING "%s: %d Problems while running the TDR.\n", dev->name, __LINE__);
result = 1;
break;
@@ -798,7 +799,7 @@
elmc_id_attn586();
s = jiffies;
while (!(mc_cmd->cmd_status & STAT_COMPL)) {
- if (jiffies - s > 30*HZ/100)
+ if (time_after(jiffies, s + 30*HZ/100))
break;
}
if (!(mc_cmd->cmd_status & STAT_COMPL)) {
diff --git a/drivers/net/3c59x.c b/drivers/net/3c59x.c
index 7f47124..5d11a06 100644
--- a/drivers/net/3c59x.c
+++ b/drivers/net/3c59x.c
@@ -258,6 +258,7 @@
#include <linux/highmem.h>
#include <linux/eisa.h>
#include <linux/bitops.h>
+#include <linux/jiffies.h>
#include <asm/irq.h> /* For NR_IRQS only. */
#include <asm/io.h>
#include <asm/uaccess.h>
@@ -841,7 +842,7 @@
XCVR_100baseFx, XCVR_MII=6, XCVR_NWAY=8, XCVR_ExtMII=9, XCVR_Default=10,
};
-static struct media_table {
+static const struct media_table {
char *name;
unsigned int media_bits:16, /* Bits to set in Wn4_Media register. */
mask:8, /* The transceiver-present bit in Wn3_Config.*/
@@ -1445,7 +1446,7 @@
}
{
- static const char * ram_split[] = {"5:3", "3:1", "1:1", "3:5"};
+ static const char * const ram_split[] = {"5:3", "3:1", "1:1", "3:5"};
unsigned int config;
EL3WINDOW(3);
vp->available_media = ioread16(ioaddr + Wn3_Options);
@@ -2724,7 +2725,7 @@
skb = dev_alloc_skb(PKT_BUF_SZ);
if (skb == NULL) {
static unsigned long last_jif;
- if ((jiffies - last_jif) > 10 * HZ) {
+ if (time_after(jiffies, last_jif + 10 * HZ)) {
printk(KERN_WARNING "%s: memory shortage\n", dev->name);
last_jif = jiffies;
}
diff --git a/drivers/net/7990.c b/drivers/net/7990.c
index 18b027e..86633c5 100644
--- a/drivers/net/7990.c
+++ b/drivers/net/7990.c
@@ -29,7 +29,7 @@
#include <linux/slab.h>
#include <linux/string.h>
#include <linux/skbuff.h>
-#include <linux/irq.h>
+#include <asm/irq.h>
/* Used for the temporal inet entries and routing */
#include <linux/socket.h>
#include <linux/bitops.h>
diff --git a/drivers/net/8139cp.c b/drivers/net/8139cp.c
index dd41049..ce99845 100644
--- a/drivers/net/8139cp.c
+++ b/drivers/net/8139cp.c
@@ -1276,7 +1276,7 @@
}
#endif /* BROKEN */
-static char mii_2_8139_map[8] = {
+static const char mii_2_8139_map[8] = {
BasicModeCtrl,
BasicModeStatus,
0,
diff --git a/drivers/net/8139too.c b/drivers/net/8139too.c
index 2beac55..e58d4c50 100644
--- a/drivers/net/8139too.c
+++ b/drivers/net/8139too.c
@@ -229,7 +229,7 @@
/* indexed by board_t, above */
-static struct {
+static const struct {
const char *name;
u32 hw_flags;
} board_info[] __devinitdata = {
@@ -1192,7 +1192,7 @@
#define mdio_delay() RTL_R8(Config4)
-static char mii_2_8139_map[8] = {
+static const char mii_2_8139_map[8] = {
BasicModeCtrl,
BasicModeStatus,
0,
diff --git a/drivers/net/82596.c b/drivers/net/82596.c
index 13b745b..da0c878 100644
--- a/drivers/net/82596.c
+++ b/drivers/net/82596.c
@@ -614,7 +614,7 @@
static int init_i596_mem(struct net_device *dev)
{
struct i596_private *lp = dev->priv;
-#if !defined(ENABLE_MVME16x_NET) && !defined(ENABLE_BVME6000_NET)
+#if !defined(ENABLE_MVME16x_NET) && !defined(ENABLE_BVME6000_NET) || defined(ENABLE_APRICOT)
short ioaddr = dev->base_addr;
#endif
unsigned long flags;
diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig
index e45a8f9..bdf294d 100644
--- a/drivers/net/Kconfig
+++ b/drivers/net/Kconfig
@@ -66,7 +66,7 @@
'Trunking' by Sun, 802.3ad by the IEEE, and 'Bonding' in Linux.
The driver supports multiple bonding modes to allow for both high
- perfomance and high availability operation.
+ performance and high availability operation.
Refer to <file:Documentation/networking/bonding.txt> for more
information.
@@ -698,8 +698,8 @@
depends on NET_VENDOR_3COM && (PCI || EISA)
select MII
---help---
- This option enables driver support for a large number of 10mbps and
- 10/100mbps EISA, PCI and PCMCIA 3Com network cards:
+ This option enables driver support for a large number of 10Mbps and
+ 10/100Mbps EISA, PCI and PCMCIA 3Com network cards:
"Vortex" (Fast EtherLink 3c590/3c592/3c595/3c597) EISA and PCI
"Boomerang" (EtherLink XL 3c900 or 3c905) PCI
@@ -1021,7 +1021,7 @@
depends on NET_ISA
---help---
If you have a network (Ethernet) card of this type, say Y. This
- driver supports intel i82595{FX,TX} based boards. Note however
+ driver supports Intel i82595{FX,TX} based boards. Note however
that the EtherExpress PRO/100 Ethernet card has its own separate
driver. Please read the Ethernet-HOWTO, available from
<http://www.tldp.org/docs.html#howto>.
@@ -1207,7 +1207,7 @@
help
Additional receive skb headroom. Note, that driver
will always reserve at least 2 bytes to make IP header
- aligned, so usualy there is no need to add any additional
+ aligned, so usually there is no need to add any additional
headroom.
If unsure, set to 0.
@@ -1613,11 +1613,7 @@
---help---
This is a driver for the Fast Ethernet PCI network cards based on
the SiS 900 and SiS 7016 chips. The SiS 900 core is also embedded in
- SiS 630 and SiS 540 chipsets. If you have one of those, say Y and
- read the Ethernet-HOWTO, available at
- <http://www.tldp.org/docs.html#howto>. Please read
- <file:Documentation/networking/sis900.txt> and comments at the
- beginning of <file:drivers/net/sis900.c> for more information.
+ SiS 630 and SiS 540 chipsets.
This driver also supports AMD 79C901 HomePNA so that you can use
your phone line as a network cable.
@@ -1933,7 +1929,7 @@
will be called myri_sbus. This is recommended.
config NS83820
- tristate "National Semiconduct DP83820 support"
+ tristate "National Semiconductor DP83820 support"
depends on PCI
help
This is a driver for the National Semiconductor DP83820 series
@@ -2194,6 +2190,7 @@
config MV643XX_ETH
tristate "MV-643XX Ethernet support"
depends on MOMENCO_OCELOT_C || MOMENCO_JAGUAR_ATX || MV64360 || MOMENCO_OCELOT_3 || PPC_MULTIPLATFORM
+ select MII
help
This driver supports the gigabit Ethernet on the Marvell MV643XX
chipset which is used in the Momenco Ocelot C and Jaguar ATX and
@@ -2513,7 +2510,7 @@
Say Y here if you want to be able to filter the packets passing over
PPP interfaces. This allows you to control which packets count as
activity (i.e. which packets will reset the idle timer or bring up
- a demand-dialled link) and which packets are to be dropped entirely.
+ a demand-dialed link) and which packets are to be dropped entirely.
You need to say Y here if you wish to use the pass-filter and
active-filter options to pppd.
@@ -2701,8 +2698,8 @@
<file:Documentation/networking/shaper.txt> for more information.
An alternative to this traffic shaper is the experimental
- Class-Based Queueing (CBQ) scheduling support which you get if you
- say Y to "QoS and/or fair queueing" above.
+ Class-Based Queuing (CBQ) scheduling support which you get if you
+ say Y to "QoS and/or fair queuing" above.
To compile this driver as a module, choose M here: the module
will be called shaper. If unsure, say N.
diff --git a/drivers/net/apne.c b/drivers/net/apne.c
index a94216b..b9820b8 100644
--- a/drivers/net/apne.c
+++ b/drivers/net/apne.c
@@ -36,6 +36,7 @@
#include <linux/delay.h>
#include <linux/netdevice.h>
#include <linux/etherdevice.h>
+#include <linux/jiffies.h>
#include <asm/system.h>
#include <asm/io.h>
@@ -216,7 +217,7 @@
outb(inb(ioaddr + NE_RESET), ioaddr + NE_RESET);
while ((inb(ioaddr + NE_EN0_ISR) & ENISR_RESET) == 0)
- if (jiffies - reset_start_time > 2*HZ/100) {
+ if (time_after(jiffies, reset_start_time + 2*HZ/100)) {
printk(" not found (no reset ack).\n");
return -ENODEV;
}
@@ -382,7 +383,7 @@
/* This check _should_not_ be necessary, omit eventually. */
while ((inb(NE_BASE+NE_EN0_ISR) & ENISR_RESET) == 0)
- if (jiffies - reset_start_time > 2*HZ/100) {
+ if (time_after(jiffies, reset_start_time + 2*HZ/100)) {
printk("%s: ne_reset_8390() did not complete.\n", dev->name);
break;
}
@@ -530,7 +531,7 @@
dma_start = jiffies;
while ((inb(NE_BASE + NE_EN0_ISR) & ENISR_RDC) == 0)
- if (jiffies - dma_start > 2*HZ/100) { /* 20ms */
+ if (time_after(jiffies, dma_start + 2*HZ/100)) { /* 20ms */
printk("%s: timeout waiting for Tx RDC.\n", dev->name);
apne_reset_8390(dev);
NS8390_init(dev,1);
diff --git a/drivers/net/arcnet/Kconfig b/drivers/net/arcnet/Kconfig
index 948de25..7284cca 100644
--- a/drivers/net/arcnet/Kconfig
+++ b/drivers/net/arcnet/Kconfig
@@ -68,10 +68,10 @@
packet is stuffed with an extra 4 byte "cookie" which doesn't
actually appear on the network. After transmit the driver will send
back a packet with protocol byte 0 containing the status of the
- transmition:
+ transmission:
0=no hardware acknowledge
1=excessive nak
- 2=transmition accepted by the reciever hardware
+ 2=transmission accepted by the receiver hardware
Received packets are also stuffed with the extra 4 bytes but it will
be random data.
diff --git a/drivers/net/arcnet/arc-rawmode.c b/drivers/net/arcnet/arc-rawmode.c
index e1ea29b..e7555d4 100644
--- a/drivers/net/arcnet/arc-rawmode.c
+++ b/drivers/net/arcnet/arc-rawmode.c
@@ -42,7 +42,7 @@
static int prepare_tx(struct net_device *dev, struct archdr *pkt, int length,
int bufnum);
-struct ArcProto rawmode_proto =
+static struct ArcProto rawmode_proto =
{
.suffix = 'r',
.mtu = XMTU,
diff --git a/drivers/net/arcnet/arc-rimi.c b/drivers/net/arcnet/arc-rimi.c
index 38c3f03..8c8d6c4 100644
--- a/drivers/net/arcnet/arc-rimi.c
+++ b/drivers/net/arcnet/arc-rimi.c
@@ -97,25 +97,44 @@
"must specify the shmem and irq!\n");
return -ENODEV;
}
+ if (dev->dev_addr[0] == 0) {
+ BUGMSG(D_NORMAL, "You need to specify your card's station "
+ "ID!\n");
+ return -ENODEV;
+ }
/*
- * Grab the memory region at mem_start for BUFFER_SIZE bytes.
+ * Grab the memory region at mem_start for MIRROR_SIZE bytes.
* Later in arcrimi_found() the real size will be determined
* and this reserve will be released and the correct size
* will be taken.
*/
- if (!request_mem_region(dev->mem_start, BUFFER_SIZE, "arcnet (90xx)")) {
+ if (!request_mem_region(dev->mem_start, MIRROR_SIZE, "arcnet (90xx)")) {
BUGMSG(D_NORMAL, "Card memory already allocated\n");
return -ENODEV;
}
- if (dev->dev_addr[0] == 0) {
- release_mem_region(dev->mem_start, BUFFER_SIZE);
- BUGMSG(D_NORMAL, "You need to specify your card's station "
- "ID!\n");
- return -ENODEV;
- }
return arcrimi_found(dev);
}
+static int check_mirror(unsigned long addr, size_t size)
+{
+ void __iomem *p;
+ int res = -1;
+
+ if (!request_mem_region(addr, size, "arcnet (90xx)"))
+ return -1;
+
+ p = ioremap(addr, size);
+ if (p) {
+ if (readb(p) == TESTvalue)
+ res = 1;
+ else
+ res = 0;
+ iounmap(p);
+ }
+
+ release_mem_region(addr, size);
+ return res;
+}
/*
* Set up the struct net_device associated with this card. Called after
@@ -125,19 +144,28 @@
{
struct arcnet_local *lp;
unsigned long first_mirror, last_mirror, shmem;
+ void __iomem *p;
int mirror_size;
int err;
+ p = ioremap(dev->mem_start, MIRROR_SIZE);
+ if (!p) {
+ release_mem_region(dev->mem_start, MIRROR_SIZE);
+ BUGMSG(D_NORMAL, "Can't ioremap\n");
+ return -ENODEV;
+ }
+
/* reserve the irq */
if (request_irq(dev->irq, &arcnet_interrupt, 0, "arcnet (RIM I)", dev)) {
- release_mem_region(dev->mem_start, BUFFER_SIZE);
+ iounmap(p);
+ release_mem_region(dev->mem_start, MIRROR_SIZE);
BUGMSG(D_NORMAL, "Can't get IRQ %d!\n", dev->irq);
return -ENODEV;
}
shmem = dev->mem_start;
- isa_writeb(TESTvalue, shmem);
- isa_writeb(dev->dev_addr[0], shmem + 1); /* actually the node ID */
+ writeb(TESTvalue, p);
+ writeb(dev->dev_addr[0], p + 1); /* actually the node ID */
/* find the real shared memory start/end points, including mirrors */
@@ -146,17 +174,18 @@
* 2k (or there are no mirrors at all) but on some, it's 4k.
*/
mirror_size = MIRROR_SIZE;
- if (isa_readb(shmem) == TESTvalue
- && isa_readb(shmem - mirror_size) != TESTvalue
- && isa_readb(shmem - 2 * mirror_size) == TESTvalue)
- mirror_size *= 2;
+ if (readb(p) == TESTvalue
+ && check_mirror(shmem - MIRROR_SIZE, MIRROR_SIZE) == 0
+ && check_mirror(shmem - 2 * MIRROR_SIZE, MIRROR_SIZE) == 1)
+ mirror_size = 2 * MIRROR_SIZE;
- first_mirror = last_mirror = shmem;
- while (isa_readb(first_mirror) == TESTvalue)
+ first_mirror = shmem - mirror_size;
+ while (check_mirror(first_mirror, mirror_size) == 1)
first_mirror -= mirror_size;
first_mirror += mirror_size;
- while (isa_readb(last_mirror) == TESTvalue)
+ last_mirror = shmem + mirror_size;
+ while (check_mirror(last_mirror, mirror_size) == 1)
last_mirror += mirror_size;
last_mirror -= mirror_size;
@@ -181,7 +210,8 @@
* with the correct size. There is a VERY slim chance this could
* fail.
*/
- release_mem_region(shmem, BUFFER_SIZE);
+ iounmap(p);
+ release_mem_region(shmem, MIRROR_SIZE);
if (!request_mem_region(dev->mem_start,
dev->mem_end - dev->mem_start + 1,
"arcnet (90xx)")) {
diff --git a/drivers/net/arcnet/arcnet.c b/drivers/net/arcnet/arcnet.c
index 12ef52c..64e2caf3 100644
--- a/drivers/net/arcnet/arcnet.c
+++ b/drivers/net/arcnet/arcnet.c
@@ -52,6 +52,7 @@
#include <net/arp.h>
#include <linux/init.h>
#include <linux/arcdevice.h>
+#include <linux/jiffies.h>
/* "do nothing" functions for protocol drivers */
static void null_rx(struct net_device *dev, int bufnum,
@@ -61,6 +62,7 @@
static int null_prepare_tx(struct net_device *dev, struct archdr *pkt,
int length, int bufnum);
+static void arcnet_rx(struct net_device *dev, int bufnum);
/*
* one ArcProto per possible proto ID. None of the elements of
@@ -71,7 +73,7 @@
struct ArcProto *arc_proto_map[256], *arc_proto_default,
*arc_bcast_proto, *arc_raw_proto;
-struct ArcProto arc_proto_null =
+static struct ArcProto arc_proto_null =
{
.suffix = '?',
.mtu = XMTU,
@@ -90,7 +92,6 @@
EXPORT_SYMBOL(arc_proto_default);
EXPORT_SYMBOL(arc_bcast_proto);
EXPORT_SYMBOL(arc_raw_proto);
-EXPORT_SYMBOL(arc_proto_null);
EXPORT_SYMBOL(arcnet_unregister_proto);
EXPORT_SYMBOL(arcnet_debug);
EXPORT_SYMBOL(alloc_arcdev);
@@ -118,7 +119,7 @@
arcnet_debug = debug;
- printk(VERSION);
+ printk("arcnet loaded.\n");
#ifdef ALPHA_WARNING
BUGLVL(D_EXTRA) {
@@ -178,8 +179,8 @@
* Dump the contents of an ARCnet buffer
*/
#if (ARCNET_DEBUG_MAX & (D_RX | D_TX))
-void arcnet_dump_packet(struct net_device *dev, int bufnum, char *desc,
- int take_arcnet_lock)
+static void arcnet_dump_packet(struct net_device *dev, int bufnum,
+ char *desc, int take_arcnet_lock)
{
struct arcnet_local *lp = dev->priv;
int i, length;
@@ -208,7 +209,10 @@
}
-EXPORT_SYMBOL(arcnet_dump_packet);
+#else
+
+#define arcnet_dump_packet(dev, bufnum, desc,take_arcnet_lock) do { } while (0)
+
#endif
@@ -733,7 +737,7 @@
spin_unlock_irqrestore(&lp->lock, flags);
- if (jiffies - lp->last_timeout > 10*HZ) {
+ if (time_after(jiffies, lp->last_timeout + 10*HZ)) {
BUGMSG(D_EXTRA, "tx timed out%s (status=%Xh, intmask=%Xh, dest=%02Xh)\n",
msg, status, lp->intmask, lp->lasttrans_dest);
lp->last_timeout = jiffies;
@@ -996,7 +1000,7 @@
* This is a generic packet receiver that calls arcnet??_rx depending on the
* protocol ID found.
*/
-void arcnet_rx(struct net_device *dev, int bufnum)
+static void arcnet_rx(struct net_device *dev, int bufnum)
{
struct arcnet_local *lp = dev->priv;
struct archdr pkt;
diff --git a/drivers/net/arcnet/com90xx.c b/drivers/net/arcnet/com90xx.c
index 6c2c9b9..43150b2 100644
--- a/drivers/net/arcnet/com90xx.c
+++ b/drivers/net/arcnet/com90xx.c
@@ -53,7 +53,7 @@
/* Internal function declarations */
-static int com90xx_found(int ioaddr, int airq, u_long shmem);
+static int com90xx_found(int ioaddr, int airq, u_long shmem, void __iomem *);
static void com90xx_command(struct net_device *dev, int command);
static int com90xx_status(struct net_device *dev);
static void com90xx_setmask(struct net_device *dev, int mask);
@@ -116,14 +116,26 @@
unsigned long airqmask;
int ports[(0x3f0 - 0x200) / 16 + 1] =
{0};
- u_long shmems[(0xFF800 - 0xA0000) / 2048 + 1] =
- {0};
+ unsigned long *shmems;
+ void __iomem **iomem;
int numports, numshmems, *port;
u_long *p;
+ int index;
if (!io && !irq && !shmem && !*device && com90xx_skip_probe)
return;
+ shmems = kzalloc(((0x10000-0xa0000) / 0x800) * sizeof(unsigned long),
+ GFP_KERNEL);
+ if (!shmems)
+ return;
+ iomem = kzalloc(((0x10000-0xa0000) / 0x800) * sizeof(void __iomem *),
+ GFP_KERNEL);
+ if (!iomem) {
+ kfree(shmems);
+ return;
+ }
+
BUGLVL(D_NORMAL) printk(VERSION);
/* set up the arrays where we'll store the possible probe addresses */
@@ -179,6 +191,8 @@
if (!numports) {
BUGMSG2(D_NORMAL, "S1: No ARCnet cards found.\n");
+ kfree(shmems);
+ kfree(iomem);
return;
}
/* Stage 2: we have now reset any possible ARCnet cards, so we can't
@@ -202,8 +216,8 @@
* 0xD1 byte in the right place, or are read-only.
*/
numprint = -1;
- for (p = &shmems[0]; p < shmems + numshmems; p++) {
- u_long ptr = *p;
+ for (index = 0, p = &shmems[0]; index < numshmems; p++, index++) {
+ void __iomem *base;
numprint++;
numprint %= 8;
@@ -213,38 +227,49 @@
}
BUGMSG2(D_INIT, "%lXh ", *p);
- if (!request_mem_region(*p, BUFFER_SIZE, "arcnet (90xx)")) {
+ if (!request_mem_region(*p, MIRROR_SIZE, "arcnet (90xx)")) {
BUGMSG2(D_INIT_REASONS, "(request_mem_region)\n");
BUGMSG2(D_INIT_REASONS, "Stage 3: ");
BUGLVL(D_INIT_REASONS) numprint = 0;
- *p-- = shmems[--numshmems];
- continue;
+ goto out;
}
- if (isa_readb(ptr) != TESTvalue) {
+ base = ioremap(*p, MIRROR_SIZE);
+ if (!base) {
+ BUGMSG2(D_INIT_REASONS, "(ioremap)\n");
+ BUGMSG2(D_INIT_REASONS, "Stage 3: ");
+ BUGLVL(D_INIT_REASONS) numprint = 0;
+ goto out1;
+ }
+ if (readb(base) != TESTvalue) {
BUGMSG2(D_INIT_REASONS, "(%02Xh != %02Xh)\n",
- isa_readb(ptr), TESTvalue);
+ readb(base), TESTvalue);
BUGMSG2(D_INIT_REASONS, "S3: ");
BUGLVL(D_INIT_REASONS) numprint = 0;
- release_mem_region(*p, BUFFER_SIZE);
- *p-- = shmems[--numshmems];
- continue;
+ goto out2;
}
/* By writing 0x42 to the TESTvalue location, we also make
* sure no "mirror" shmem areas show up - if they occur
* in another pass through this loop, they will be discarded
* because *cptr != TESTvalue.
*/
- isa_writeb(0x42, ptr);
- if (isa_readb(ptr) != 0x42) {
+ writeb(0x42, base);
+ if (readb(base) != 0x42) {
BUGMSG2(D_INIT_REASONS, "(read only)\n");
BUGMSG2(D_INIT_REASONS, "S3: ");
- release_mem_region(*p, BUFFER_SIZE);
- *p-- = shmems[--numshmems];
- continue;
+ goto out2;
}
BUGMSG2(D_INIT_REASONS, "\n");
BUGMSG2(D_INIT_REASONS, "S3: ");
BUGLVL(D_INIT_REASONS) numprint = 0;
+ iomem[index] = base;
+ continue;
+ out2:
+ iounmap(base);
+ out1:
+ release_mem_region(*p, MIRROR_SIZE);
+ out:
+ *p-- = shmems[--numshmems];
+ index--;
}
BUGMSG2(D_INIT, "\n");
@@ -252,6 +277,8 @@
BUGMSG2(D_NORMAL, "S3: No ARCnet cards found.\n");
for (port = &ports[0]; port < ports + numports; port++)
release_region(*port, ARCNET_TOTAL_SIZE);
+ kfree(shmems);
+ kfree(iomem);
return;
}
/* Stage 4: something of a dummy, to report the shmems that are
@@ -351,30 +378,32 @@
mdelay(RESETtime);
} else {
/* just one shmem and port, assume they match */
- isa_writeb(TESTvalue, shmems[0]);
+ writeb(TESTvalue, iomem[0]);
}
#else
inb(_RESET);
mdelay(RESETtime);
#endif
- for (p = &shmems[0]; p < shmems + numshmems; p++) {
- u_long ptr = *p;
+ for (index = 0; index < numshmems; index++) {
+ u_long ptr = shmems[index];
+ void __iomem *base = iomem[index];
- if (isa_readb(ptr) == TESTvalue) { /* found one */
+ if (readb(base) == TESTvalue) { /* found one */
BUGMSG2(D_INIT, "%lXh)\n", *p);
openparen = 0;
/* register the card */
- if (com90xx_found(*port, airq, *p) == 0)
+ if (com90xx_found(*port, airq, ptr, base) == 0)
found = 1;
numprint = -1;
/* remove shmem from the list */
- *p = shmems[--numshmems];
+ shmems[index] = shmems[--numshmems];
+ iomem[index] = iomem[numshmems];
break; /* go to the next I/O port */
} else {
- BUGMSG2(D_INIT_REASONS, "%Xh-", isa_readb(ptr));
+ BUGMSG2(D_INIT_REASONS, "%Xh-", readb(base));
}
}
@@ -391,17 +420,40 @@
BUGLVL(D_INIT_REASONS) printk("\n");
/* Now put back TESTvalue on all leftover shmems. */
- for (p = &shmems[0]; p < shmems + numshmems; p++) {
- isa_writeb(TESTvalue, *p);
- release_mem_region(*p, BUFFER_SIZE);
+ for (index = 0; index < numshmems; index++) {
+ writeb(TESTvalue, iomem[index]);
+ iounmap(iomem[index]);
+ release_mem_region(shmems[index], MIRROR_SIZE);
}
+ kfree(shmems);
+ kfree(iomem);
}
+static int check_mirror(unsigned long addr, size_t size)
+{
+ void __iomem *p;
+ int res = -1;
+
+ if (!request_mem_region(addr, size, "arcnet (90xx)"))
+ return -1;
+
+ p = ioremap(addr, size);
+ if (p) {
+ if (readb(p) == TESTvalue)
+ res = 1;
+ else
+ res = 0;
+ iounmap(p);
+ }
+
+ release_mem_region(addr, size);
+ return res;
+}
/* Set up the struct net_device associated with this card. Called after
* probing succeeds.
*/
-static int __init com90xx_found(int ioaddr, int airq, u_long shmem)
+static int __init com90xx_found(int ioaddr, int airq, u_long shmem, void __iomem *p)
{
struct net_device *dev = NULL;
struct arcnet_local *lp;
@@ -412,7 +464,8 @@
dev = alloc_arcdev(device);
if (!dev) {
BUGMSG2(D_NORMAL, "com90xx: Can't allocate device!\n");
- release_mem_region(shmem, BUFFER_SIZE);
+ iounmap(p);
+ release_mem_region(shmem, MIRROR_SIZE);
return -ENOMEM;
}
lp = dev->priv;
@@ -423,24 +476,27 @@
* 2k (or there are no mirrors at all) but on some, it's 4k.
*/
mirror_size = MIRROR_SIZE;
- if (isa_readb(shmem) == TESTvalue
- && isa_readb(shmem - mirror_size) != TESTvalue
- && isa_readb(shmem - 2 * mirror_size) == TESTvalue)
- mirror_size *= 2;
+ if (readb(p) == TESTvalue &&
+ check_mirror(shmem - MIRROR_SIZE, MIRROR_SIZE) == 0 &&
+ check_mirror(shmem - 2 * MIRROR_SIZE, MIRROR_SIZE) == 1)
+ mirror_size = 2 * MIRROR_SIZE;
- first_mirror = last_mirror = shmem;
- while (isa_readb(first_mirror) == TESTvalue)
+ first_mirror = shmem - mirror_size;
+ while (check_mirror(first_mirror, mirror_size) == 1)
first_mirror -= mirror_size;
first_mirror += mirror_size;
- while (isa_readb(last_mirror) == TESTvalue)
+ last_mirror = shmem + mirror_size;
+ while (check_mirror(last_mirror, mirror_size) == 1)
last_mirror += mirror_size;
last_mirror -= mirror_size;
dev->mem_start = first_mirror;
dev->mem_end = last_mirror + MIRROR_SIZE - 1;
- release_mem_region(shmem, BUFFER_SIZE);
+ iounmap(p);
+ release_mem_region(shmem, MIRROR_SIZE);
+
if (!request_mem_region(dev->mem_start, dev->mem_end - dev->mem_start + 1, "arcnet (90xx)"))
goto err_free_dev;
diff --git a/drivers/net/arcnet/rfc1051.c b/drivers/net/arcnet/rfc1051.c
index 6d79137..6d6c69f 100644
--- a/drivers/net/arcnet/rfc1051.c
+++ b/drivers/net/arcnet/rfc1051.c
@@ -43,7 +43,7 @@
int bufnum);
-struct ArcProto rfc1051_proto =
+static struct ArcProto rfc1051_proto =
{
.suffix = 's',
.mtu = XMTU - RFC1051_HDR_SIZE,
diff --git a/drivers/net/arcnet/rfc1201.c b/drivers/net/arcnet/rfc1201.c
index 6b6ae4b..bee3422 100644
--- a/drivers/net/arcnet/rfc1201.c
+++ b/drivers/net/arcnet/rfc1201.c
@@ -43,7 +43,7 @@
int bufnum);
static int continue_tx(struct net_device *dev, int bufnum);
-struct ArcProto rfc1201_proto =
+static struct ArcProto rfc1201_proto =
{
.suffix = 'a',
.mtu = 1500, /* could be more, but some receivers can't handle it... */
diff --git a/drivers/net/arm/etherh.c b/drivers/net/arm/etherh.c
index 6a93b66..d52deb8 100644
--- a/drivers/net/arm/etherh.c
+++ b/drivers/net/arm/etherh.c
@@ -46,6 +46,7 @@
#include <linux/device.h>
#include <linux/init.h>
#include <linux/bitops.h>
+#include <linux/jiffies.h>
#include <asm/system.h>
#include <asm/ecard.h>
@@ -355,7 +356,7 @@
dma_start = jiffies;
while ((readb (addr + EN0_ISR) & ENISR_RDC) == 0)
- if (jiffies - dma_start > 2*HZ/100) { /* 20ms */
+ if (time_after(jiffies, dma_start + 2*HZ/100)) { /* 20ms */
printk(KERN_ERR "%s: timeout waiting for TX RDC\n",
dev->name);
etherh_reset (dev);
diff --git a/drivers/net/bnx2.c b/drivers/net/bnx2.c
index a24200d..b787b65 100644
--- a/drivers/net/bnx2.c
+++ b/drivers/net/bnx2.c
@@ -46,7 +46,7 @@
} board_t;
/* indexed by board_t, above */
-static struct {
+static const struct {
char *name;
} board_info[] __devinitdata = {
{ "Broadcom NetXtreme II BCM5706 1000Base-T" },
@@ -3476,7 +3476,7 @@
{
int ret;
int i;
- static struct {
+ static const struct {
u16 offset;
u16 flags;
u32 rw_mask;
@@ -3891,7 +3891,7 @@
static int
bnx2_do_mem_test(struct bnx2 *bp, u32 start, u32 size)
{
- static u32 test_pattern[] = { 0x00000000, 0xffffffff, 0x55555555,
+ static const u32 test_pattern[] = { 0x00000000, 0xffffffff, 0x55555555,
0xaaaaaaaa , 0xaa55aa55, 0x55aa55aa };
int i;
@@ -3916,7 +3916,7 @@
{
int ret = 0;
int i;
- static struct {
+ static const struct {
u32 offset;
u32 len;
} mem_tbl[] = {
@@ -5122,7 +5122,7 @@
#define STATS_OFFSET32(offset_name) (offsetof(struct statistics_block, offset_name) / 4)
-static unsigned long bnx2_stats_offset_arr[BNX2_NUM_STATS] = {
+static const unsigned long bnx2_stats_offset_arr[BNX2_NUM_STATS] = {
STATS_OFFSET32(stat_IfHCInOctets_hi),
STATS_OFFSET32(stat_IfHCInBadOctets_hi),
STATS_OFFSET32(stat_IfHCOutOctets_hi),
diff --git a/drivers/net/bnx2_fw.h b/drivers/net/bnx2_fw.h
index 0c21bd8..8158974 100644
--- a/drivers/net/bnx2_fw.h
+++ b/drivers/net/bnx2_fw.h
@@ -14,20 +14,20 @@
* accompanying it.
*/
-static int bnx2_COM_b06FwReleaseMajor = 0x1;
-static int bnx2_COM_b06FwReleaseMinor = 0x0;
-static int bnx2_COM_b06FwReleaseFix = 0x0;
-static u32 bnx2_COM_b06FwStartAddr = 0x080008b4;
-static u32 bnx2_COM_b06FwTextAddr = 0x08000000;
-static int bnx2_COM_b06FwTextLen = 0x57bc;
-static u32 bnx2_COM_b06FwDataAddr = 0x08005840;
-static int bnx2_COM_b06FwDataLen = 0x0;
-static u32 bnx2_COM_b06FwRodataAddr = 0x080057c0;
-static int bnx2_COM_b06FwRodataLen = 0x58;
-static u32 bnx2_COM_b06FwBssAddr = 0x08005860;
-static int bnx2_COM_b06FwBssLen = 0x88;
-static u32 bnx2_COM_b06FwSbssAddr = 0x08005840;
-static int bnx2_COM_b06FwSbssLen = 0x1c;
+static const int bnx2_COM_b06FwReleaseMajor = 0x1;
+static const int bnx2_COM_b06FwReleaseMinor = 0x0;
+static const int bnx2_COM_b06FwReleaseFix = 0x0;
+static const u32 bnx2_COM_b06FwStartAddr = 0x080008b4;
+static const u32 bnx2_COM_b06FwTextAddr = 0x08000000;
+static const int bnx2_COM_b06FwTextLen = 0x57bc;
+static const u32 bnx2_COM_b06FwDataAddr = 0x08005840;
+static const int bnx2_COM_b06FwDataLen = 0x0;
+static const u32 bnx2_COM_b06FwRodataAddr = 0x080057c0;
+static const int bnx2_COM_b06FwRodataLen = 0x58;
+static const u32 bnx2_COM_b06FwBssAddr = 0x08005860;
+static const int bnx2_COM_b06FwBssLen = 0x88;
+static const u32 bnx2_COM_b06FwSbssAddr = 0x08005840;
+static const int bnx2_COM_b06FwSbssLen = 0x1c;
static u32 bnx2_COM_b06FwText[(0x57bc/4) + 1] = {
0x0a00022d, 0x00000000, 0x00000000, 0x0000000d, 0x636f6d20, 0x322e352e,
0x38000000, 0x02050802, 0x00000000, 0x00000003, 0x00000014, 0x00000032,
@@ -2325,20 +2325,20 @@
0x0000000c, 0x29520000, 0x00000018, 0x80000002, 0x0000000c, 0x29800000,
0x00000018, 0x00570000 };
-static int bnx2_TPAT_b06FwReleaseMajor = 0x1;
-static int bnx2_TPAT_b06FwReleaseMinor = 0x0;
-static int bnx2_TPAT_b06FwReleaseFix = 0x0;
-static u32 bnx2_TPAT_b06FwStartAddr = 0x08000860;
-static u32 bnx2_TPAT_b06FwTextAddr = 0x08000800;
-static int bnx2_TPAT_b06FwTextLen = 0x122c;
-static u32 bnx2_TPAT_b06FwDataAddr = 0x08001a60;
-static int bnx2_TPAT_b06FwDataLen = 0x0;
-static u32 bnx2_TPAT_b06FwRodataAddr = 0x00000000;
-static int bnx2_TPAT_b06FwRodataLen = 0x0;
-static u32 bnx2_TPAT_b06FwBssAddr = 0x08001aa0;
-static int bnx2_TPAT_b06FwBssLen = 0x250;
-static u32 bnx2_TPAT_b06FwSbssAddr = 0x08001a60;
-static int bnx2_TPAT_b06FwSbssLen = 0x34;
+static const int bnx2_TPAT_b06FwReleaseMajor = 0x1;
+static const int bnx2_TPAT_b06FwReleaseMinor = 0x0;
+static const int bnx2_TPAT_b06FwReleaseFix = 0x0;
+static const u32 bnx2_TPAT_b06FwStartAddr = 0x08000860;
+static const u32 bnx2_TPAT_b06FwTextAddr = 0x08000800;
+static const int bnx2_TPAT_b06FwTextLen = 0x122c;
+static const u32 bnx2_TPAT_b06FwDataAddr = 0x08001a60;
+static const int bnx2_TPAT_b06FwDataLen = 0x0;
+static const u32 bnx2_TPAT_b06FwRodataAddr = 0x00000000;
+static const int bnx2_TPAT_b06FwRodataLen = 0x0;
+static const u32 bnx2_TPAT_b06FwBssAddr = 0x08001aa0;
+static const int bnx2_TPAT_b06FwBssLen = 0x250;
+static const u32 bnx2_TPAT_b06FwSbssAddr = 0x08001a60;
+static const int bnx2_TPAT_b06FwSbssLen = 0x34;
static u32 bnx2_TPAT_b06FwText[(0x122c/4) + 1] = {
0x0a000218, 0x00000000, 0x00000000, 0x0000000d, 0x74706174, 0x20322e35,
0x2e313100, 0x02050b01, 0x00000000, 0x00000000, 0x00000000, 0x00000000,
@@ -2540,20 +2540,20 @@
static u32 bnx2_TPAT_b06FwBss[(0x250/4) + 1] = { 0x0 };
static u32 bnx2_TPAT_b06FwSbss[(0x34/4) + 1] = { 0x0 };
-static int bnx2_TXP_b06FwReleaseMajor = 0x1;
-static int bnx2_TXP_b06FwReleaseMinor = 0x0;
-static int bnx2_TXP_b06FwReleaseFix = 0x0;
-static u32 bnx2_TXP_b06FwStartAddr = 0x080034b0;
-static u32 bnx2_TXP_b06FwTextAddr = 0x08000000;
-static int bnx2_TXP_b06FwTextLen = 0x5748;
-static u32 bnx2_TXP_b06FwDataAddr = 0x08005760;
-static int bnx2_TXP_b06FwDataLen = 0x0;
-static u32 bnx2_TXP_b06FwRodataAddr = 0x00000000;
-static int bnx2_TXP_b06FwRodataLen = 0x0;
-static u32 bnx2_TXP_b06FwBssAddr = 0x080057a0;
-static int bnx2_TXP_b06FwBssLen = 0x1c4;
-static u32 bnx2_TXP_b06FwSbssAddr = 0x08005760;
-static int bnx2_TXP_b06FwSbssLen = 0x38;
+static const int bnx2_TXP_b06FwReleaseMajor = 0x1;
+static const int bnx2_TXP_b06FwReleaseMinor = 0x0;
+static const int bnx2_TXP_b06FwReleaseFix = 0x0;
+static const u32 bnx2_TXP_b06FwStartAddr = 0x080034b0;
+static const u32 bnx2_TXP_b06FwTextAddr = 0x08000000;
+static const int bnx2_TXP_b06FwTextLen = 0x5748;
+static const u32 bnx2_TXP_b06FwDataAddr = 0x08005760;
+static const int bnx2_TXP_b06FwDataLen = 0x0;
+static const u32 bnx2_TXP_b06FwRodataAddr = 0x00000000;
+static const int bnx2_TXP_b06FwRodataLen = 0x0;
+static const u32 bnx2_TXP_b06FwBssAddr = 0x080057a0;
+static const int bnx2_TXP_b06FwBssLen = 0x1c4;
+static const u32 bnx2_TXP_b06FwSbssAddr = 0x08005760;
+static const int bnx2_TXP_b06FwSbssLen = 0x38;
static u32 bnx2_TXP_b06FwText[(0x5748/4) + 1] = {
0x0a000d2c, 0x00000000, 0x00000000, 0x0000000d, 0x74787020, 0x322e352e,
0x38000000, 0x02050800, 0x0000000a, 0x000003e8, 0x0000ea60, 0x00000000,
diff --git a/drivers/net/bonding/bond_alb.c b/drivers/net/bonding/bond_alb.c
index f2a6318..e83bc82 100644
--- a/drivers/net/bonding/bond_alb.c
+++ b/drivers/net/bonding/bond_alb.c
@@ -1261,7 +1261,7 @@
struct ethhdr *eth_data;
struct alb_bond_info *bond_info = &(BOND_ALB_INFO(bond));
struct slave *tx_slave = NULL;
- static u32 ip_bcast = 0xffffffff;
+ static const u32 ip_bcast = 0xffffffff;
int hash_size = 0;
int do_tx_balance = 1;
u32 hash_index = 0;
diff --git a/drivers/net/bonding/bond_main.c b/drivers/net/bonding/bond_main.c
index bcf9f17..2d0ac16 100644
--- a/drivers/net/bonding/bond_main.c
+++ b/drivers/net/bonding/bond_main.c
@@ -131,7 +131,7 @@
/*----------------------------- Global variables ----------------------------*/
-static const char *version =
+static const char * const version =
DRV_DESCRIPTION ": v" DRV_VERSION " (" DRV_RELDATE ")\n";
LIST_HEAD(bond_dev_list);
@@ -1040,6 +1040,10 @@
if ((bond->params.mode == BOND_MODE_TLB) ||
(bond->params.mode == BOND_MODE_ALB)) {
bond_alb_handle_active_change(bond, new_active);
+ if (old_active)
+ bond_set_slave_inactive_flags(old_active);
+ if (new_active)
+ bond_set_slave_active_flags(new_active);
} else {
bond->curr_active_slave = new_active;
}
@@ -1443,15 +1447,16 @@
switch (bond->params.mode) {
case BOND_MODE_ACTIVEBACKUP:
- /* if we're in active-backup mode, we need one and only one active
- * interface. The backup interfaces will have their NOARP flag set
- * because we need them to be completely deaf and not to respond to
- * any ARP request on the network to avoid fooling a switch. Thus,
- * since we guarantee that curr_active_slave always point to the last
- * usable interface, we just have to verify this interface's flag.
+ /* if we're in active-backup mode, we need one and
+ * only one active interface. The backup interfaces
+ * will have their SLAVE_INACTIVE flag set because we
+ * need them to be drop all packets. Thus, since we
+ * guarantee that curr_active_slave always point to
+ * the last usable interface, we just have to verify
+ * this interface's flag.
*/
if (((!bond->curr_active_slave) ||
- (bond->curr_active_slave->dev->flags & IFF_NOARP)) &&
+ (bond->curr_active_slave->dev->priv_flags & IFF_SLAVE_INACTIVE)) &&
(new_slave->link != BOND_LINK_DOWN)) {
dprintk("This is the first active slave\n");
/* first slave or no active slave yet, and this link
@@ -1492,6 +1497,8 @@
* is OK, so make this interface the active one
*/
bond_change_active_slave(bond, new_slave);
+ } else {
+ bond_set_slave_inactive_flags(new_slave);
}
break;
default:
@@ -1724,13 +1731,8 @@
addr.sa_family = slave_dev->type;
dev_set_mac_address(slave_dev, &addr);
- /* restore the original state of the
- * IFF_NOARP flag that might have been
- * set by bond_set_slave_inactive_flags()
- */
- if ((slave->original_flags & IFF_NOARP) == 0) {
- slave_dev->flags &= ~IFF_NOARP;
- }
+ slave_dev->priv_flags &= ~(IFF_MASTER_8023AD | IFF_MASTER_ALB |
+ IFF_SLAVE_INACTIVE);
kfree(slave);
@@ -1816,12 +1818,8 @@
addr.sa_family = slave_dev->type;
dev_set_mac_address(slave_dev, &addr);
- /* restore the original state of the IFF_NOARP flag that might have
- * been set by bond_set_slave_inactive_flags()
- */
- if ((slave->original_flags & IFF_NOARP) == 0) {
- slave_dev->flags &= ~IFF_NOARP;
- }
+ slave_dev->priv_flags &= ~(IFF_MASTER_8023AD | IFF_MASTER_ALB |
+ IFF_SLAVE_INACTIVE);
kfree(slave);
@@ -4061,14 +4059,17 @@
bond_dev->hard_start_xmit = bond_xmit_broadcast;
break;
case BOND_MODE_8023AD:
+ bond_set_master_3ad_flags(bond);
bond_dev->hard_start_xmit = bond_3ad_xmit_xor;
if (bond->params.xmit_policy == BOND_XMIT_POLICY_LAYER34)
bond->xmit_hash_policy = bond_xmit_hash_policy_l34;
else
bond->xmit_hash_policy = bond_xmit_hash_policy_l2;
break;
- case BOND_MODE_TLB:
case BOND_MODE_ALB:
+ bond_set_master_alb_flags(bond);
+ /* FALLTHRU */
+ case BOND_MODE_TLB:
bond_dev->hard_start_xmit = bond_alb_xmit;
bond_dev->set_mac_address = bond_alb_set_mac_address;
break;
diff --git a/drivers/net/bonding/bond_sysfs.c b/drivers/net/bonding/bond_sysfs.c
index 041bcc5..5a9bd95 100644
--- a/drivers/net/bonding/bond_sysfs.c
+++ b/drivers/net/bonding/bond_sysfs.c
@@ -424,6 +424,12 @@
ret = -EINVAL;
goto out;
} else {
+ if (bond->params.mode == BOND_MODE_8023AD)
+ bond_unset_master_3ad_flags(bond);
+
+ if (bond->params.mode == BOND_MODE_ALB)
+ bond_unset_master_alb_flags(bond);
+
bond->params.mode = new_value;
bond_set_mode_ops(bond, bond->params.mode);
printk(KERN_INFO DRV_NAME ": %s: setting mode to %s (%d).\n",
diff --git a/drivers/net/bonding/bonding.h b/drivers/net/bonding/bonding.h
index 3dd78d0..ce9dc9b 100644
--- a/drivers/net/bonding/bonding.h
+++ b/drivers/net/bonding/bonding.h
@@ -22,8 +22,8 @@
#include "bond_3ad.h"
#include "bond_alb.h"
-#define DRV_VERSION "3.0.1"
-#define DRV_RELDATE "January 9, 2006"
+#define DRV_VERSION "3.0.2"
+#define DRV_RELDATE "February 21, 2006"
#define DRV_NAME "bonding"
#define DRV_DESCRIPTION "Ethernet Channel Bonding Driver"
@@ -230,14 +230,37 @@
static inline void bond_set_slave_inactive_flags(struct slave *slave)
{
- slave->state = BOND_STATE_BACKUP;
- slave->dev->flags |= IFF_NOARP;
+ struct bonding *bond = slave->dev->master->priv;
+ if (bond->params.mode != BOND_MODE_TLB &&
+ bond->params.mode != BOND_MODE_ALB)
+ slave->state = BOND_STATE_BACKUP;
+ slave->dev->priv_flags |= IFF_SLAVE_INACTIVE;
}
static inline void bond_set_slave_active_flags(struct slave *slave)
{
slave->state = BOND_STATE_ACTIVE;
- slave->dev->flags &= ~IFF_NOARP;
+ slave->dev->priv_flags &= ~IFF_SLAVE_INACTIVE;
+}
+
+static inline void bond_set_master_3ad_flags(struct bonding *bond)
+{
+ bond->dev->priv_flags |= IFF_MASTER_8023AD;
+}
+
+static inline void bond_unset_master_3ad_flags(struct bonding *bond)
+{
+ bond->dev->priv_flags &= ~IFF_MASTER_8023AD;
+}
+
+static inline void bond_set_master_alb_flags(struct bonding *bond)
+{
+ bond->dev->priv_flags |= IFF_MASTER_ALB;
+}
+
+static inline void bond_unset_master_alb_flags(struct bonding *bond)
+{
+ bond->dev->priv_flags &= ~IFF_MASTER_ALB;
}
struct vlan_entry *bond_next_vlan(struct bonding *bond, struct vlan_entry *curr);
diff --git a/drivers/net/chelsio/subr.c b/drivers/net/chelsio/subr.c
index 1ebb5d1..12e4e96 100644
--- a/drivers/net/chelsio/subr.c
+++ b/drivers/net/chelsio/subr.c
@@ -686,7 +686,7 @@
*/
static void __devinit get_pci_mode(adapter_t *adapter, struct chelsio_pci_params *p)
{
- static unsigned short speed_map[] = { 33, 66, 100, 133 };
+ static const unsigned short speed_map[] = { 33, 66, 100, 133 };
u32 pci_mode;
pci_read_config_dword(adapter->pdev, A_PCICFG_MODE, &pci_mode);
diff --git a/drivers/net/dgrs.c b/drivers/net/dgrs.c
index 70b47e4..32d13166 100644
--- a/drivers/net/dgrs.c
+++ b/drivers/net/dgrs.c
@@ -993,7 +993,7 @@
int is;
unsigned long i;
- static int iv2is[16] = {
+ static const int iv2is[16] = {
0, 0, 0, ES4H_IS_INT3,
0, ES4H_IS_INT5, 0, ES4H_IS_INT7,
0, 0, ES4H_IS_INT10, ES4H_IS_INT11,
diff --git a/drivers/net/dgrs_firmware.c b/drivers/net/dgrs_firmware.c
index 1e49e1e..8c20d4c 100644
--- a/drivers/net/dgrs_firmware.c
+++ b/drivers/net/dgrs_firmware.c
@@ -1,4 +1,4 @@
-static int dgrs_firmnum = 550;
+static const int dgrs_firmnum = 550;
static char dgrs_firmver[] = "$Version$";
static char dgrs_firmdate[] = "11/16/96 03:45:15";
static unsigned char dgrs_code[] __initdata = {
@@ -9963,4 +9963,4 @@
109,46,99,0,114,99,0,0,48,120,0,0,
0,0,0,0,0,0,0,0,0,0,0,0
} ;
-static int dgrs_ncode = 119520 ;
+static const int dgrs_ncode = 119520 ;
diff --git a/drivers/net/dl2k.c b/drivers/net/dl2k.c
index 430c628..6376b63 100644
--- a/drivers/net/dl2k.c
+++ b/drivers/net/dl2k.c
@@ -90,8 +90,8 @@
#define EnableInt() \
writew(DEFAULT_INTR, ioaddr + IntEnable)
-static int max_intrloop = 50;
-static int multicast_filter_limit = 0x40;
+static const int max_intrloop = 50;
+static const int multicast_filter_limit = 0x40;
static int rio_open (struct net_device *dev);
static void rio_timer (unsigned long data);
diff --git a/drivers/net/e1000/e1000.h b/drivers/net/e1000/e1000.h
index 99baf0e..214468c 100644
--- a/drivers/net/e1000/e1000.h
+++ b/drivers/net/e1000/e1000.h
@@ -83,10 +83,6 @@
struct e1000_adapter;
#include "e1000_hw.h"
-#ifdef CONFIG_E1000_MQ
-#include <linux/cpu.h>
-#include <linux/smp.h>
-#endif
#ifdef DBG
#define E1000_DBG(args...) printk(KERN_DEBUG "e1000: " args)
@@ -169,12 +165,6 @@
uint16_t next_to_watch;
};
-#ifdef CONFIG_E1000_MQ
-struct e1000_queue_stats {
- uint64_t packets;
- uint64_t bytes;
-};
-#endif
struct e1000_ps_page { struct page *ps_page[PS_PAGE_BUFFERS]; };
struct e1000_ps_page_dma { uint64_t ps_page_dma[PS_PAGE_BUFFERS]; };
@@ -198,12 +188,7 @@
spinlock_t tx_lock;
uint16_t tdh;
uint16_t tdt;
-
boolean_t last_tx_tso;
-
-#ifdef CONFIG_E1000_MQ
- struct e1000_queue_stats tx_stats;
-#endif
};
struct e1000_rx_ring {
@@ -230,9 +215,6 @@
uint16_t rdh;
uint16_t rdt;
-#ifdef CONFIG_E1000_MQ
- struct e1000_queue_stats rx_stats;
-#endif
};
#define E1000_DESC_UNUSED(R) \
@@ -260,6 +242,7 @@
uint32_t rx_buffer_len;
uint32_t part_num;
uint32_t wol;
+ uint32_t ksp3_port_a;
uint32_t smartspeed;
uint32_t en_mng_pt;
uint16_t link_speed;
@@ -269,8 +252,8 @@
spinlock_t tx_queue_lock;
#endif
atomic_t irq_sem;
- struct work_struct tx_timeout_task;
struct work_struct watchdog_task;
+ struct work_struct reset_task;
uint8_t fc_autoneg;
struct timer_list blink_timer;
@@ -278,9 +261,6 @@
/* TX */
struct e1000_tx_ring *tx_ring; /* One per active queue */
-#ifdef CONFIG_E1000_MQ
- struct e1000_tx_ring **cpu_tx_ring; /* per-cpu */
-#endif
unsigned long tx_queue_len;
uint32_t txd_cmd;
uint32_t tx_int_delay;
@@ -301,24 +281,19 @@
/* RX */
#ifdef CONFIG_E1000_NAPI
boolean_t (*clean_rx) (struct e1000_adapter *adapter,
- struct e1000_rx_ring *rx_ring,
- int *work_done, int work_to_do);
+ struct e1000_rx_ring *rx_ring,
+ int *work_done, int work_to_do);
#else
boolean_t (*clean_rx) (struct e1000_adapter *adapter,
- struct e1000_rx_ring *rx_ring);
+ struct e1000_rx_ring *rx_ring);
#endif
void (*alloc_rx_buf) (struct e1000_adapter *adapter,
- struct e1000_rx_ring *rx_ring,
- int cleaned_count);
+ struct e1000_rx_ring *rx_ring,
+ int cleaned_count);
struct e1000_rx_ring *rx_ring; /* One per active queue */
#ifdef CONFIG_E1000_NAPI
struct net_device *polling_netdev; /* One per active queue */
#endif
-#ifdef CONFIG_E1000_MQ
- struct net_device **cpu_netdev; /* per-cpu */
- struct call_async_data_struct rx_sched_call_data;
- cpumask_t cpumask;
-#endif
int num_tx_queues;
int num_rx_queues;
@@ -353,10 +328,15 @@
struct e1000_rx_ring test_rx_ring;
- u32 *config_space;
+ uint32_t *config_space;
int msg_enable;
#ifdef CONFIG_PCI_MSI
boolean_t have_msi;
#endif
+ /* to not mess up cache alignment, always add to the bottom */
+ boolean_t txb2b;
+#ifdef NETIF_F_TSO
+ boolean_t tso_force;
+#endif
};
#endif /* _E1000_H_ */
diff --git a/drivers/net/e1000/e1000_ethtool.c b/drivers/net/e1000/e1000_ethtool.c
index 5cedc81..44d39f1 100644
--- a/drivers/net/e1000/e1000_ethtool.c
+++ b/drivers/net/e1000/e1000_ethtool.c
@@ -60,7 +60,6 @@
{ "tx_bytes", E1000_STAT(net_stats.tx_bytes) },
{ "rx_errors", E1000_STAT(net_stats.rx_errors) },
{ "tx_errors", E1000_STAT(net_stats.tx_errors) },
- { "rx_dropped", E1000_STAT(net_stats.rx_dropped) },
{ "tx_dropped", E1000_STAT(net_stats.tx_dropped) },
{ "multicast", E1000_STAT(net_stats.multicast) },
{ "collisions", E1000_STAT(net_stats.collisions) },
@@ -68,7 +67,6 @@
{ "rx_over_errors", E1000_STAT(net_stats.rx_over_errors) },
{ "rx_crc_errors", E1000_STAT(net_stats.rx_crc_errors) },
{ "rx_frame_errors", E1000_STAT(net_stats.rx_frame_errors) },
- { "rx_fifo_errors", E1000_STAT(net_stats.rx_fifo_errors) },
{ "rx_no_buffer_count", E1000_STAT(stats.rnbc) },
{ "rx_missed_errors", E1000_STAT(net_stats.rx_missed_errors) },
{ "tx_aborted_errors", E1000_STAT(net_stats.tx_aborted_errors) },
@@ -97,14 +95,7 @@
{ "alloc_rx_buff_failed", E1000_STAT(alloc_rx_buff_failed) },
};
-#ifdef CONFIG_E1000_MQ
-#define E1000_QUEUE_STATS_LEN \
- (((struct e1000_adapter *)netdev->priv)->num_tx_queues + \
- ((struct e1000_adapter *)netdev->priv)->num_rx_queues) \
- * (sizeof(struct e1000_queue_stats) / sizeof(uint64_t))
-#else
#define E1000_QUEUE_STATS_LEN 0
-#endif
#define E1000_GLOBAL_STATS_LEN \
sizeof(e1000_gstrings_stats) / sizeof(struct e1000_stats)
#define E1000_STATS_LEN (E1000_GLOBAL_STATS_LEN + E1000_QUEUE_STATS_LEN)
@@ -346,6 +337,9 @@
netdev->features |= NETIF_F_TSO;
else
netdev->features &= ~NETIF_F_TSO;
+
+ DPRINTK(PROBE, INFO, "TSO is %s\n", data ? "Enabled" : "Disabled");
+ adapter->tso_force = TRUE;
return 0;
}
#endif /* NETIF_F_TSO */
@@ -594,6 +588,7 @@
case e1000_82571:
case e1000_82572:
case e1000_82573:
+ case e1000_80003es2lan:
sprintf(firmware_version, "%d.%d-%d",
(eeprom_data & 0xF000) >> 12,
(eeprom_data & 0x0FF0) >> 4,
@@ -642,6 +637,9 @@
struct e1000_rx_ring *rxdr, *rx_old, *rx_new;
int i, err, tx_ring_size, rx_ring_size;
+ if ((ring->rx_mini_pending) || (ring->rx_jumbo_pending))
+ return -EINVAL;
+
tx_ring_size = sizeof(struct e1000_tx_ring) * adapter->num_tx_queues;
rx_ring_size = sizeof(struct e1000_rx_ring) * adapter->num_rx_queues;
@@ -669,9 +667,6 @@
txdr = adapter->tx_ring;
rxdr = adapter->rx_ring;
- if ((ring->rx_mini_pending) || (ring->rx_jumbo_pending))
- return -EINVAL;
-
rxdr->count = max(ring->rx_pending,(uint32_t)E1000_MIN_RXD);
rxdr->count = min(rxdr->count,(uint32_t)(mac_type < e1000_82544 ?
E1000_MAX_RXD : E1000_MAX_82544_RXD));
@@ -767,6 +762,7 @@
/* there are several bits on newer hardware that are r/w */
case e1000_82571:
case e1000_82572:
+ case e1000_80003es2lan:
toggle = 0x7FFFF3FF;
break;
case e1000_82573:
@@ -1256,6 +1252,10 @@
e1000_write_phy_reg(&adapter->hw, PHY_CTRL, 0x9140);
/* autoneg off */
e1000_write_phy_reg(&adapter->hw, PHY_CTRL, 0x8140);
+ } else if (adapter->hw.phy_type == e1000_phy_gg82563) {
+ e1000_write_phy_reg(&adapter->hw,
+ GG82563_PHY_KMRN_MODE_CTRL,
+ 0x1CE);
}
/* force 1000, set loopback */
e1000_write_phy_reg(&adapter->hw, PHY_CTRL, 0x4140);
@@ -1325,6 +1325,7 @@
case e1000_82571:
case e1000_82572:
case e1000_82573:
+ case e1000_80003es2lan:
return e1000_integrated_phy_loopback(adapter);
break;
@@ -1405,6 +1406,11 @@
case e1000_82546_rev_3:
default:
hw->autoneg = TRUE;
+ if (hw->phy_type == e1000_phy_gg82563) {
+ e1000_write_phy_reg(hw,
+ GG82563_PHY_KMRN_MODE_CTRL,
+ 0x180);
+ }
e1000_read_phy_reg(hw, PHY_CTRL, &phy_reg);
if (phy_reg & MII_CR_LOOPBACK) {
phy_reg &= ~MII_CR_LOOPBACK;
@@ -1640,10 +1646,26 @@
case E1000_DEV_ID_82546EB_QUAD_COPPER:
case E1000_DEV_ID_82545EM_FIBER:
case E1000_DEV_ID_82545EM_COPPER:
+ case E1000_DEV_ID_82546GB_QUAD_COPPER:
wol->supported = 0;
wol->wolopts = 0;
return;
+ case E1000_DEV_ID_82546GB_QUAD_COPPER_KSP3:
+ /* device id 10B5 port-A supports wol */
+ if (!adapter->ksp3_port_a) {
+ wol->supported = 0;
+ return;
+ }
+ /* KSP3 does not suppport UCAST wake-ups for any interface */
+ wol->supported = WAKE_MCAST | WAKE_BCAST | WAKE_MAGIC;
+
+ if (adapter->wol & E1000_WUFC_EX)
+ DPRINTK(DRV, ERR, "Interface does not support "
+ "directed (unicast) frame wake-up packets\n");
+ wol->wolopts = 0;
+ goto do_defaults;
+
case E1000_DEV_ID_82546EB_FIBER:
case E1000_DEV_ID_82546GB_FIBER:
case E1000_DEV_ID_82571EB_FIBER:
@@ -1658,8 +1680,9 @@
default:
wol->supported = WAKE_UCAST | WAKE_MCAST |
WAKE_BCAST | WAKE_MAGIC;
-
wol->wolopts = 0;
+
+do_defaults:
if (adapter->wol & E1000_WUFC_EX)
wol->wolopts |= WAKE_UCAST;
if (adapter->wol & E1000_WUFC_MC)
@@ -1684,10 +1707,22 @@
case E1000_DEV_ID_82543GC_COPPER:
case E1000_DEV_ID_82544EI_FIBER:
case E1000_DEV_ID_82546EB_QUAD_COPPER:
+ case E1000_DEV_ID_82546GB_QUAD_COPPER:
case E1000_DEV_ID_82545EM_FIBER:
case E1000_DEV_ID_82545EM_COPPER:
return wol->wolopts ? -EOPNOTSUPP : 0;
+ case E1000_DEV_ID_82546GB_QUAD_COPPER_KSP3:
+ /* device id 10B5 port-A supports wol */
+ if (!adapter->ksp3_port_a)
+ return wol->wolopts ? -EOPNOTSUPP : 0;
+
+ if (wol->wolopts & WAKE_UCAST) {
+ DPRINTK(DRV, ERR, "Interface does not support "
+ "directed (unicast) frame wake-up packets\n");
+ return -EOPNOTSUPP;
+ }
+
case E1000_DEV_ID_82546EB_FIBER:
case E1000_DEV_ID_82546GB_FIBER:
case E1000_DEV_ID_82571EB_FIBER:
@@ -1799,11 +1834,6 @@
struct ethtool_stats *stats, uint64_t *data)
{
struct e1000_adapter *adapter = netdev_priv(netdev);
-#ifdef CONFIG_E1000_MQ
- uint64_t *queue_stat;
- int stat_count = sizeof(struct e1000_queue_stats) / sizeof(uint64_t);
- int j, k;
-#endif
int i;
e1000_update_stats(adapter);
@@ -1812,29 +1842,12 @@
data[i] = (e1000_gstrings_stats[i].sizeof_stat ==
sizeof(uint64_t)) ? *(uint64_t *)p : *(uint32_t *)p;
}
-#ifdef CONFIG_E1000_MQ
- for (j = 0; j < adapter->num_tx_queues; j++) {
- queue_stat = (uint64_t *)&adapter->tx_ring[j].tx_stats;
- for (k = 0; k < stat_count; k++)
- data[i + k] = queue_stat[k];
- i += k;
- }
- for (j = 0; j < adapter->num_rx_queues; j++) {
- queue_stat = (uint64_t *)&adapter->rx_ring[j].rx_stats;
- for (k = 0; k < stat_count; k++)
- data[i + k] = queue_stat[k];
- i += k;
- }
-#endif
/* BUG_ON(i != E1000_STATS_LEN); */
}
static void
e1000_get_strings(struct net_device *netdev, uint32_t stringset, uint8_t *data)
{
-#ifdef CONFIG_E1000_MQ
- struct e1000_adapter *adapter = netdev_priv(netdev);
-#endif
uint8_t *p = data;
int i;
@@ -1849,20 +1862,6 @@
ETH_GSTRING_LEN);
p += ETH_GSTRING_LEN;
}
-#ifdef CONFIG_E1000_MQ
- for (i = 0; i < adapter->num_tx_queues; i++) {
- sprintf(p, "tx_queue_%u_packets", i);
- p += ETH_GSTRING_LEN;
- sprintf(p, "tx_queue_%u_bytes", i);
- p += ETH_GSTRING_LEN;
- }
- for (i = 0; i < adapter->num_rx_queues; i++) {
- sprintf(p, "rx_queue_%u_packets", i);
- p += ETH_GSTRING_LEN;
- sprintf(p, "rx_queue_%u_bytes", i);
- p += ETH_GSTRING_LEN;
- }
-#endif
/* BUG_ON(p - data != E1000_STATS_LEN * ETH_GSTRING_LEN); */
break;
}
diff --git a/drivers/net/e1000/e1000_hw.c b/drivers/net/e1000/e1000_hw.c
index beeec0f..523c2c9 100644
--- a/drivers/net/e1000/e1000_hw.c
+++ b/drivers/net/e1000/e1000_hw.c
@@ -100,6 +100,8 @@
#define E1000_WRITE_REG_IO(a, reg, val) \
e1000_write_reg_io((a), E1000_##reg, val)
+static int32_t e1000_configure_kmrn_for_10_100(struct e1000_hw *hw);
+static int32_t e1000_configure_kmrn_for_1000(struct e1000_hw *hw);
/* IGP cable length table */
static const
@@ -153,6 +155,11 @@
hw->phy_type = e1000_phy_igp;
break;
}
+ case GG82563_E_PHY_ID:
+ if (hw->mac_type == e1000_80003es2lan) {
+ hw->phy_type = e1000_phy_gg82563;
+ break;
+ }
/* Fall Through */
default:
/* Should never have loaded on this device */
@@ -353,12 +360,19 @@
case E1000_DEV_ID_82573L:
hw->mac_type = e1000_82573;
break;
+ case E1000_DEV_ID_80003ES2LAN_COPPER_DPT:
+ case E1000_DEV_ID_80003ES2LAN_SERDES_DPT:
+ hw->mac_type = e1000_80003es2lan;
+ break;
default:
/* Should never have loaded on this device */
return -E1000_ERR_MAC_TYPE;
}
switch(hw->mac_type) {
+ case e1000_80003es2lan:
+ hw->swfw_sync_present = TRUE;
+ /* fall through */
case e1000_82571:
case e1000_82572:
case e1000_82573:
@@ -399,6 +413,7 @@
case E1000_DEV_ID_82546GB_SERDES:
case E1000_DEV_ID_82571EB_SERDES:
case E1000_DEV_ID_82572EI_SERDES:
+ case E1000_DEV_ID_80003ES2LAN_SERDES_DPT:
hw->media_type = e1000_media_type_internal_serdes;
break;
default:
@@ -575,6 +590,7 @@
/* fall through */
case e1000_82571:
case e1000_82572:
+ case e1000_80003es2lan:
ret_val = e1000_get_auto_rd_done(hw);
if(ret_val)
/* We don't want to continue accessing MAC registers. */
@@ -641,6 +657,7 @@
uint16_t cmd_mmrbc;
uint16_t stat_mmrbc;
uint32_t mta_size;
+ uint32_t reg_data;
uint32_t ctrl_ext;
DEBUGFUNC("e1000_init_hw");
@@ -739,6 +756,7 @@
case e1000_82571:
case e1000_82572:
case e1000_82573:
+ case e1000_80003es2lan:
ctrl |= E1000_TXDCTL_COUNT_DESC;
break;
}
@@ -752,12 +770,34 @@
switch (hw->mac_type) {
default:
break;
+ case e1000_80003es2lan:
+ /* Enable retransmit on late collisions */
+ reg_data = E1000_READ_REG(hw, TCTL);
+ reg_data |= E1000_TCTL_RTLC;
+ E1000_WRITE_REG(hw, TCTL, reg_data);
+
+ /* Configure Gigabit Carry Extend Padding */
+ reg_data = E1000_READ_REG(hw, TCTL_EXT);
+ reg_data &= ~E1000_TCTL_EXT_GCEX_MASK;
+ reg_data |= DEFAULT_80003ES2LAN_TCTL_EXT_GCEX;
+ E1000_WRITE_REG(hw, TCTL_EXT, reg_data);
+
+ /* Configure Transmit Inter-Packet Gap */
+ reg_data = E1000_READ_REG(hw, TIPG);
+ reg_data &= ~E1000_TIPG_IPGT_MASK;
+ reg_data |= DEFAULT_80003ES2LAN_TIPG_IPGT_1000;
+ E1000_WRITE_REG(hw, TIPG, reg_data);
+
+ reg_data = E1000_READ_REG_ARRAY(hw, FFLT, 0x0001);
+ reg_data &= ~0x00100000;
+ E1000_WRITE_REG_ARRAY(hw, FFLT, 0x0001, reg_data);
+ /* Fall through */
case e1000_82571:
case e1000_82572:
ctrl = E1000_READ_REG(hw, TXDCTL1);
- ctrl &= ~E1000_TXDCTL_WTHRESH;
- ctrl |= E1000_TXDCTL_COUNT_DESC | E1000_TXDCTL_FULL_TX_DESC_WB;
- ctrl |= (1 << 22);
+ ctrl = (ctrl & ~E1000_TXDCTL_WTHRESH) | E1000_TXDCTL_FULL_TX_DESC_WB;
+ if(hw->mac_type >= e1000_82571)
+ ctrl |= E1000_TXDCTL_COUNT_DESC;
E1000_WRITE_REG(hw, TXDCTL1, ctrl);
break;
}
@@ -906,7 +946,13 @@
* signal detection. So this should be done before e1000_setup_pcs_link()
* or e1000_phy_setup() is called.
*/
- if(hw->mac_type == e1000_82543) {
+ if (hw->mac_type == e1000_82543) {
+ ret_val = e1000_read_eeprom(hw, EEPROM_INIT_CONTROL2_REG,
+ 1, &eeprom_data);
+ if (ret_val) {
+ DEBUGOUT("EEPROM Read Error\n");
+ return -E1000_ERR_EEPROM;
+ }
ctrl_ext = ((eeprom_data & EEPROM_WORD0F_SWPDIO_EXT) <<
SWDPIO__EXT_SHIFT);
E1000_WRITE_REG(hw, CTRL_EXT, ctrl_ext);
@@ -1308,6 +1354,154 @@
return E1000_SUCCESS;
}
+/********************************************************************
+* Copper link setup for e1000_phy_gg82563 series.
+*
+* hw - Struct containing variables accessed by shared code
+*********************************************************************/
+static int32_t
+e1000_copper_link_ggp_setup(struct e1000_hw *hw)
+{
+ int32_t ret_val;
+ uint16_t phy_data;
+ uint32_t reg_data;
+
+ DEBUGFUNC("e1000_copper_link_ggp_setup");
+
+ if(!hw->phy_reset_disable) {
+
+ /* Enable CRS on TX for half-duplex operation. */
+ ret_val = e1000_read_phy_reg(hw, GG82563_PHY_MAC_SPEC_CTRL,
+ &phy_data);
+ if(ret_val)
+ return ret_val;
+
+ phy_data |= GG82563_MSCR_ASSERT_CRS_ON_TX;
+ /* Use 25MHz for both link down and 1000BASE-T for Tx clock */
+ phy_data |= GG82563_MSCR_TX_CLK_1000MBPS_25MHZ;
+
+ ret_val = e1000_write_phy_reg(hw, GG82563_PHY_MAC_SPEC_CTRL,
+ phy_data);
+ if(ret_val)
+ return ret_val;
+
+ /* Options:
+ * MDI/MDI-X = 0 (default)
+ * 0 - Auto for all speeds
+ * 1 - MDI mode
+ * 2 - MDI-X mode
+ * 3 - Auto for 1000Base-T only (MDI-X for 10/100Base-T modes)
+ */
+ ret_val = e1000_read_phy_reg(hw, GG82563_PHY_SPEC_CTRL, &phy_data);
+ if(ret_val)
+ return ret_val;
+
+ phy_data &= ~GG82563_PSCR_CROSSOVER_MODE_MASK;
+
+ switch (hw->mdix) {
+ case 1:
+ phy_data |= GG82563_PSCR_CROSSOVER_MODE_MDI;
+ break;
+ case 2:
+ phy_data |= GG82563_PSCR_CROSSOVER_MODE_MDIX;
+ break;
+ case 0:
+ default:
+ phy_data |= GG82563_PSCR_CROSSOVER_MODE_AUTO;
+ break;
+ }
+
+ /* Options:
+ * disable_polarity_correction = 0 (default)
+ * Automatic Correction for Reversed Cable Polarity
+ * 0 - Disabled
+ * 1 - Enabled
+ */
+ phy_data &= ~GG82563_PSCR_POLARITY_REVERSAL_DISABLE;
+ if(hw->disable_polarity_correction == 1)
+ phy_data |= GG82563_PSCR_POLARITY_REVERSAL_DISABLE;
+ ret_val = e1000_write_phy_reg(hw, GG82563_PHY_SPEC_CTRL, phy_data);
+
+ if(ret_val)
+ return ret_val;
+
+ /* SW Reset the PHY so all changes take effect */
+ ret_val = e1000_phy_reset(hw);
+ if (ret_val) {
+ DEBUGOUT("Error Resetting the PHY\n");
+ return ret_val;
+ }
+ } /* phy_reset_disable */
+
+ if (hw->mac_type == e1000_80003es2lan) {
+ /* Bypass RX and TX FIFO's */
+ ret_val = e1000_write_kmrn_reg(hw, E1000_KUMCTRLSTA_OFFSET_FIFO_CTRL,
+ E1000_KUMCTRLSTA_FIFO_CTRL_RX_BYPASS |
+ E1000_KUMCTRLSTA_FIFO_CTRL_TX_BYPASS);
+ if (ret_val)
+ return ret_val;
+
+ ret_val = e1000_read_phy_reg(hw, GG82563_PHY_SPEC_CTRL_2, &phy_data);
+ if (ret_val)
+ return ret_val;
+
+ phy_data &= ~GG82563_PSCR2_REVERSE_AUTO_NEG;
+ ret_val = e1000_write_phy_reg(hw, GG82563_PHY_SPEC_CTRL_2, phy_data);
+
+ if (ret_val)
+ return ret_val;
+
+ reg_data = E1000_READ_REG(hw, CTRL_EXT);
+ reg_data &= ~(E1000_CTRL_EXT_LINK_MODE_MASK);
+ E1000_WRITE_REG(hw, CTRL_EXT, reg_data);
+
+ ret_val = e1000_read_phy_reg(hw, GG82563_PHY_PWR_MGMT_CTRL,
+ &phy_data);
+ if (ret_val)
+ return ret_val;
+
+ /* Do not init these registers when the HW is in IAMT mode, since the
+ * firmware will have already initialized them. We only initialize
+ * them if the HW is not in IAMT mode.
+ */
+ if (e1000_check_mng_mode(hw) == FALSE) {
+ /* Enable Electrical Idle on the PHY */
+ phy_data |= GG82563_PMCR_ENABLE_ELECTRICAL_IDLE;
+ ret_val = e1000_write_phy_reg(hw, GG82563_PHY_PWR_MGMT_CTRL,
+ phy_data);
+ if (ret_val)
+ return ret_val;
+
+ ret_val = e1000_read_phy_reg(hw, GG82563_PHY_KMRN_MODE_CTRL,
+ &phy_data);
+ if (ret_val)
+ return ret_val;
+
+ /* Enable Pass False Carrier on the PHY */
+ phy_data |= GG82563_KMCR_PASS_FALSE_CARRIER;
+
+ ret_val = e1000_write_phy_reg(hw, GG82563_PHY_KMRN_MODE_CTRL,
+ phy_data);
+ if (ret_val)
+ return ret_val;
+ }
+
+ /* Workaround: Disable padding in Kumeran interface in the MAC
+ * and in the PHY to avoid CRC errors.
+ */
+ ret_val = e1000_read_phy_reg(hw, GG82563_PHY_INBAND_CTRL,
+ &phy_data);
+ if (ret_val)
+ return ret_val;
+ phy_data |= GG82563_ICR_DIS_PADDING;
+ ret_val = e1000_write_phy_reg(hw, GG82563_PHY_INBAND_CTRL,
+ phy_data);
+ if (ret_val)
+ return ret_val;
+ }
+
+ return E1000_SUCCESS;
+}
/********************************************************************
* Copper link setup for e1000_phy_m88 series.
@@ -1518,6 +1712,7 @@
int32_t ret_val;
uint16_t i;
uint16_t phy_data;
+ uint16_t reg_data;
DEBUGFUNC("e1000_setup_copper_link");
@@ -1526,6 +1721,22 @@
if(ret_val)
return ret_val;
+ switch (hw->mac_type) {
+ case e1000_80003es2lan:
+ ret_val = e1000_read_kmrn_reg(hw, E1000_KUMCTRLSTA_OFFSET_INB_CTRL,
+ ®_data);
+ if (ret_val)
+ return ret_val;
+ reg_data |= E1000_KUMCTRLSTA_INB_CTRL_DIS_PADDING;
+ ret_val = e1000_write_kmrn_reg(hw, E1000_KUMCTRLSTA_OFFSET_INB_CTRL,
+ reg_data);
+ if (ret_val)
+ return ret_val;
+ break;
+ default:
+ break;
+ }
+
if (hw->phy_type == e1000_phy_igp ||
hw->phy_type == e1000_phy_igp_2) {
ret_val = e1000_copper_link_igp_setup(hw);
@@ -1535,6 +1746,10 @@
ret_val = e1000_copper_link_mgp_setup(hw);
if(ret_val)
return ret_val;
+ } else if (hw->phy_type == e1000_phy_gg82563) {
+ ret_val = e1000_copper_link_ggp_setup(hw);
+ if(ret_val)
+ return ret_val;
}
if(hw->autoneg) {
@@ -1582,6 +1797,59 @@
}
/******************************************************************************
+* Configure the MAC-to-PHY interface for 10/100Mbps
+*
+* hw - Struct containing variables accessed by shared code
+******************************************************************************/
+static int32_t
+e1000_configure_kmrn_for_10_100(struct e1000_hw *hw)
+{
+ int32_t ret_val = E1000_SUCCESS;
+ uint32_t tipg;
+ uint16_t reg_data;
+
+ DEBUGFUNC("e1000_configure_kmrn_for_10_100");
+
+ reg_data = E1000_KUMCTRLSTA_HD_CTRL_10_100_DEFAULT;
+ ret_val = e1000_write_kmrn_reg(hw, E1000_KUMCTRLSTA_OFFSET_HD_CTRL,
+ reg_data);
+ if (ret_val)
+ return ret_val;
+
+ /* Configure Transmit Inter-Packet Gap */
+ tipg = E1000_READ_REG(hw, TIPG);
+ tipg &= ~E1000_TIPG_IPGT_MASK;
+ tipg |= DEFAULT_80003ES2LAN_TIPG_IPGT_10_100;
+ E1000_WRITE_REG(hw, TIPG, tipg);
+
+ return ret_val;
+}
+
+static int32_t
+e1000_configure_kmrn_for_1000(struct e1000_hw *hw)
+{
+ int32_t ret_val = E1000_SUCCESS;
+ uint16_t reg_data;
+ uint32_t tipg;
+
+ DEBUGFUNC("e1000_configure_kmrn_for_1000");
+
+ reg_data = E1000_KUMCTRLSTA_HD_CTRL_1000_DEFAULT;
+ ret_val = e1000_write_kmrn_reg(hw, E1000_KUMCTRLSTA_OFFSET_HD_CTRL,
+ reg_data);
+ if (ret_val)
+ return ret_val;
+
+ /* Configure Transmit Inter-Packet Gap */
+ tipg = E1000_READ_REG(hw, TIPG);
+ tipg &= ~E1000_TIPG_IPGT_MASK;
+ tipg |= DEFAULT_80003ES2LAN_TIPG_IPGT_1000;
+ E1000_WRITE_REG(hw, TIPG, tipg);
+
+ return ret_val;
+}
+
+/******************************************************************************
* Configures PHY autoneg and flow control advertisement settings
*
* hw - Struct containing variables accessed by shared code
@@ -1802,7 +2070,8 @@
/* Write the configured values back to the Device Control Reg. */
E1000_WRITE_REG(hw, CTRL, ctrl);
- if (hw->phy_type == e1000_phy_m88) {
+ if ((hw->phy_type == e1000_phy_m88) ||
+ (hw->phy_type == e1000_phy_gg82563)) {
ret_val = e1000_read_phy_reg(hw, M88E1000_PHY_SPEC_CTRL, &phy_data);
if(ret_val)
return ret_val;
@@ -1871,7 +2140,8 @@
msec_delay(100);
}
if((i == 0) &&
- (hw->phy_type == e1000_phy_m88)) {
+ ((hw->phy_type == e1000_phy_m88) ||
+ (hw->phy_type == e1000_phy_gg82563))) {
/* We didn't get link. Reset the DSP and wait again for link. */
ret_val = e1000_phy_reset_dsp(hw);
if(ret_val) {
@@ -1930,6 +2200,27 @@
if(ret_val)
return ret_val;
}
+ } else if (hw->phy_type == e1000_phy_gg82563) {
+ /* The TX_CLK of the Extended PHY Specific Control Register defaults
+ * to 2.5MHz on a reset. We need to re-force it back to 25MHz, if
+ * we're not in a forced 10/duplex configuration. */
+ ret_val = e1000_read_phy_reg(hw, GG82563_PHY_MAC_SPEC_CTRL, &phy_data);
+ if (ret_val)
+ return ret_val;
+
+ phy_data &= ~GG82563_MSCR_TX_CLK_MASK;
+ if ((hw->forced_speed_duplex == e1000_10_full) ||
+ (hw->forced_speed_duplex == e1000_10_half))
+ phy_data |= GG82563_MSCR_TX_CLK_10MBPS_2_5MHZ;
+ else
+ phy_data |= GG82563_MSCR_TX_CLK_100MBPS_25MHZ;
+
+ /* Also due to the reset, we need to enable CRS on Tx. */
+ phy_data |= GG82563_MSCR_ASSERT_CRS_ON_TX;
+
+ ret_val = e1000_write_phy_reg(hw, GG82563_PHY_MAC_SPEC_CTRL, phy_data);
+ if (ret_val)
+ return ret_val;
}
return E1000_SUCCESS;
}
@@ -2592,6 +2883,16 @@
}
}
+ if ((hw->mac_type == e1000_80003es2lan) &&
+ (hw->media_type == e1000_media_type_copper)) {
+ if (*speed == SPEED_1000)
+ ret_val = e1000_configure_kmrn_for_1000(hw);
+ else
+ ret_val = e1000_configure_kmrn_for_10_100(hw);
+ if (ret_val)
+ return ret_val;
+ }
+
return E1000_SUCCESS;
}
@@ -2767,6 +3068,72 @@
return data;
}
+int32_t
+e1000_swfw_sync_acquire(struct e1000_hw *hw, uint16_t mask)
+{
+ uint32_t swfw_sync = 0;
+ uint32_t swmask = mask;
+ uint32_t fwmask = mask << 16;
+ int32_t timeout = 200;
+
+ DEBUGFUNC("e1000_swfw_sync_acquire");
+
+ if (!hw->swfw_sync_present)
+ return e1000_get_hw_eeprom_semaphore(hw);
+
+ while(timeout) {
+ if (e1000_get_hw_eeprom_semaphore(hw))
+ return -E1000_ERR_SWFW_SYNC;
+
+ swfw_sync = E1000_READ_REG(hw, SW_FW_SYNC);
+ if (!(swfw_sync & (fwmask | swmask))) {
+ break;
+ }
+
+ /* firmware currently using resource (fwmask) */
+ /* or other software thread currently using resource (swmask) */
+ e1000_put_hw_eeprom_semaphore(hw);
+ msec_delay_irq(5);
+ timeout--;
+ }
+
+ if (!timeout) {
+ DEBUGOUT("Driver can't access resource, SW_FW_SYNC timeout.\n");
+ return -E1000_ERR_SWFW_SYNC;
+ }
+
+ swfw_sync |= swmask;
+ E1000_WRITE_REG(hw, SW_FW_SYNC, swfw_sync);
+
+ e1000_put_hw_eeprom_semaphore(hw);
+ return E1000_SUCCESS;
+}
+
+void
+e1000_swfw_sync_release(struct e1000_hw *hw, uint16_t mask)
+{
+ uint32_t swfw_sync;
+ uint32_t swmask = mask;
+
+ DEBUGFUNC("e1000_swfw_sync_release");
+
+ if (!hw->swfw_sync_present) {
+ e1000_put_hw_eeprom_semaphore(hw);
+ return;
+ }
+
+ /* if (e1000_get_hw_eeprom_semaphore(hw))
+ * return -E1000_ERR_SWFW_SYNC; */
+ while (e1000_get_hw_eeprom_semaphore(hw) != E1000_SUCCESS);
+ /* empty */
+
+ swfw_sync = E1000_READ_REG(hw, SW_FW_SYNC);
+ swfw_sync &= ~swmask;
+ E1000_WRITE_REG(hw, SW_FW_SYNC, swfw_sync);
+
+ e1000_put_hw_eeprom_semaphore(hw);
+}
+
/*****************************************************************************
* Reads the value from a PHY register, if the value is on a specific non zero
* page, sets the page first.
@@ -2779,22 +3146,55 @@
uint16_t *phy_data)
{
uint32_t ret_val;
+ uint16_t swfw;
DEBUGFUNC("e1000_read_phy_reg");
+ if ((hw->mac_type == e1000_80003es2lan) &&
+ (E1000_READ_REG(hw, STATUS) & E1000_STATUS_FUNC_1)) {
+ swfw = E1000_SWFW_PHY1_SM;
+ } else {
+ swfw = E1000_SWFW_PHY0_SM;
+ }
+ if (e1000_swfw_sync_acquire(hw, swfw))
+ return -E1000_ERR_SWFW_SYNC;
+
if((hw->phy_type == e1000_phy_igp ||
hw->phy_type == e1000_phy_igp_2) &&
(reg_addr > MAX_PHY_MULTI_PAGE_REG)) {
ret_val = e1000_write_phy_reg_ex(hw, IGP01E1000_PHY_PAGE_SELECT,
(uint16_t)reg_addr);
if(ret_val) {
+ e1000_swfw_sync_release(hw, swfw);
return ret_val;
}
+ } else if (hw->phy_type == e1000_phy_gg82563) {
+ if (((reg_addr & MAX_PHY_REG_ADDRESS) > MAX_PHY_MULTI_PAGE_REG) ||
+ (hw->mac_type == e1000_80003es2lan)) {
+ /* Select Configuration Page */
+ if ((reg_addr & MAX_PHY_REG_ADDRESS) < GG82563_MIN_ALT_REG) {
+ ret_val = e1000_write_phy_reg_ex(hw, GG82563_PHY_PAGE_SELECT,
+ (uint16_t)((uint16_t)reg_addr >> GG82563_PAGE_SHIFT));
+ } else {
+ /* Use Alternative Page Select register to access
+ * registers 30 and 31
+ */
+ ret_val = e1000_write_phy_reg_ex(hw,
+ GG82563_PHY_PAGE_SELECT_ALT,
+ (uint16_t)((uint16_t)reg_addr >> GG82563_PAGE_SHIFT));
+ }
+
+ if (ret_val) {
+ e1000_swfw_sync_release(hw, swfw);
+ return ret_val;
+ }
+ }
}
ret_val = e1000_read_phy_reg_ex(hw, MAX_PHY_REG_ADDRESS & reg_addr,
phy_data);
+ e1000_swfw_sync_release(hw, swfw);
return ret_val;
}
@@ -2885,22 +3285,55 @@
uint16_t phy_data)
{
uint32_t ret_val;
+ uint16_t swfw;
DEBUGFUNC("e1000_write_phy_reg");
+ if ((hw->mac_type == e1000_80003es2lan) &&
+ (E1000_READ_REG(hw, STATUS) & E1000_STATUS_FUNC_1)) {
+ swfw = E1000_SWFW_PHY1_SM;
+ } else {
+ swfw = E1000_SWFW_PHY0_SM;
+ }
+ if (e1000_swfw_sync_acquire(hw, swfw))
+ return -E1000_ERR_SWFW_SYNC;
+
if((hw->phy_type == e1000_phy_igp ||
hw->phy_type == e1000_phy_igp_2) &&
(reg_addr > MAX_PHY_MULTI_PAGE_REG)) {
ret_val = e1000_write_phy_reg_ex(hw, IGP01E1000_PHY_PAGE_SELECT,
(uint16_t)reg_addr);
if(ret_val) {
+ e1000_swfw_sync_release(hw, swfw);
return ret_val;
}
+ } else if (hw->phy_type == e1000_phy_gg82563) {
+ if (((reg_addr & MAX_PHY_REG_ADDRESS) > MAX_PHY_MULTI_PAGE_REG) ||
+ (hw->mac_type == e1000_80003es2lan)) {
+ /* Select Configuration Page */
+ if ((reg_addr & MAX_PHY_REG_ADDRESS) < GG82563_MIN_ALT_REG) {
+ ret_val = e1000_write_phy_reg_ex(hw, GG82563_PHY_PAGE_SELECT,
+ (uint16_t)((uint16_t)reg_addr >> GG82563_PAGE_SHIFT));
+ } else {
+ /* Use Alternative Page Select register to access
+ * registers 30 and 31
+ */
+ ret_val = e1000_write_phy_reg_ex(hw,
+ GG82563_PHY_PAGE_SELECT_ALT,
+ (uint16_t)((uint16_t)reg_addr >> GG82563_PAGE_SHIFT));
+ }
+
+ if (ret_val) {
+ e1000_swfw_sync_release(hw, swfw);
+ return ret_val;
+ }
+ }
}
ret_val = e1000_write_phy_reg_ex(hw, MAX_PHY_REG_ADDRESS & reg_addr,
phy_data);
+ e1000_swfw_sync_release(hw, swfw);
return ret_val;
}
@@ -2967,6 +3400,65 @@
return E1000_SUCCESS;
}
+int32_t
+e1000_read_kmrn_reg(struct e1000_hw *hw,
+ uint32_t reg_addr,
+ uint16_t *data)
+{
+ uint32_t reg_val;
+ uint16_t swfw;
+ DEBUGFUNC("e1000_read_kmrn_reg");
+
+ if ((hw->mac_type == e1000_80003es2lan) &&
+ (E1000_READ_REG(hw, STATUS) & E1000_STATUS_FUNC_1)) {
+ swfw = E1000_SWFW_PHY1_SM;
+ } else {
+ swfw = E1000_SWFW_PHY0_SM;
+ }
+ if (e1000_swfw_sync_acquire(hw, swfw))
+ return -E1000_ERR_SWFW_SYNC;
+
+ /* Write register address */
+ reg_val = ((reg_addr << E1000_KUMCTRLSTA_OFFSET_SHIFT) &
+ E1000_KUMCTRLSTA_OFFSET) |
+ E1000_KUMCTRLSTA_REN;
+ E1000_WRITE_REG(hw, KUMCTRLSTA, reg_val);
+ udelay(2);
+
+ /* Read the data returned */
+ reg_val = E1000_READ_REG(hw, KUMCTRLSTA);
+ *data = (uint16_t)reg_val;
+
+ e1000_swfw_sync_release(hw, swfw);
+ return E1000_SUCCESS;
+}
+
+int32_t
+e1000_write_kmrn_reg(struct e1000_hw *hw,
+ uint32_t reg_addr,
+ uint16_t data)
+{
+ uint32_t reg_val;
+ uint16_t swfw;
+ DEBUGFUNC("e1000_write_kmrn_reg");
+
+ if ((hw->mac_type == e1000_80003es2lan) &&
+ (E1000_READ_REG(hw, STATUS) & E1000_STATUS_FUNC_1)) {
+ swfw = E1000_SWFW_PHY1_SM;
+ } else {
+ swfw = E1000_SWFW_PHY0_SM;
+ }
+ if (e1000_swfw_sync_acquire(hw, swfw))
+ return -E1000_ERR_SWFW_SYNC;
+
+ reg_val = ((reg_addr << E1000_KUMCTRLSTA_OFFSET_SHIFT) &
+ E1000_KUMCTRLSTA_OFFSET) | data;
+ E1000_WRITE_REG(hw, KUMCTRLSTA, reg_val);
+ udelay(2);
+
+ e1000_swfw_sync_release(hw, swfw);
+ return E1000_SUCCESS;
+}
/******************************************************************************
* Returns the PHY to the power-on reset state
@@ -2979,6 +3471,7 @@
uint32_t ctrl, ctrl_ext;
uint32_t led_ctrl;
int32_t ret_val;
+ uint16_t swfw;
DEBUGFUNC("e1000_phy_hw_reset");
@@ -2991,11 +3484,21 @@
DEBUGOUT("Resetting Phy...\n");
if(hw->mac_type > e1000_82543) {
+ if ((hw->mac_type == e1000_80003es2lan) &&
+ (E1000_READ_REG(hw, STATUS) & E1000_STATUS_FUNC_1)) {
+ swfw = E1000_SWFW_PHY1_SM;
+ } else {
+ swfw = E1000_SWFW_PHY0_SM;
+ }
+ if (e1000_swfw_sync_acquire(hw, swfw)) {
+ e1000_release_software_semaphore(hw);
+ return -E1000_ERR_SWFW_SYNC;
+ }
/* Read the device control register and assert the E1000_CTRL_PHY_RST
* bit. Then, take it out of reset.
* For pre-e1000_82571 hardware, we delay for 10ms between the assert
* and deassert. For e1000_82571 hardware and later, we instead delay
- * for 10ms after the deassertion.
+ * for 50us between and 10ms after the deassertion.
*/
ctrl = E1000_READ_REG(hw, CTRL);
E1000_WRITE_REG(hw, CTRL, ctrl | E1000_CTRL_PHY_RST);
@@ -3011,6 +3514,7 @@
if (hw->mac_type >= e1000_82571)
msec_delay(10);
+ e1000_swfw_sync_release(hw, swfw);
} else {
/* Read the Extended Device Control Register, assert the PHY_RESET_DIR
* bit to put the PHY into reset. Then, take it out of reset.
@@ -3037,6 +3541,7 @@
/* Wait for FW to finish PHY configuration. */
ret_val = e1000_get_phy_cfg_done(hw);
+ e1000_release_software_semaphore(hw);
return ret_val;
}
@@ -3114,6 +3619,15 @@
return E1000_SUCCESS;
}
+ /* ESB-2 PHY reads require e1000_phy_gg82563 to be set because of a work-
+ * around that forces PHY page 0 to be set or the reads fail. The rest of
+ * the code in this routine uses e1000_read_phy_reg to read the PHY ID.
+ * So for ESB-2 we need to have this set so our reads won't fail. If the
+ * attached PHY is not a e1000_phy_gg82563, the routines below will figure
+ * this out as well. */
+ if (hw->mac_type == e1000_80003es2lan)
+ hw->phy_type = e1000_phy_gg82563;
+
/* Read the PHY ID Registers to identify which PHY is onboard. */
ret_val = e1000_read_phy_reg(hw, PHY_ID1, &phy_id_high);
if(ret_val)
@@ -3151,6 +3665,9 @@
case e1000_82573:
if(hw->phy_id == M88E1111_I_PHY_ID) match = TRUE;
break;
+ case e1000_80003es2lan:
+ if (hw->phy_id == GG82563_E_PHY_ID) match = TRUE;
+ break;
default:
DEBUGOUT1("Invalid MAC type %d\n", hw->mac_type);
return -E1000_ERR_CONFIG;
@@ -3177,8 +3694,10 @@
DEBUGFUNC("e1000_phy_reset_dsp");
do {
- ret_val = e1000_write_phy_reg(hw, 29, 0x001d);
- if(ret_val) break;
+ if (hw->phy_type != e1000_phy_gg82563) {
+ ret_val = e1000_write_phy_reg(hw, 29, 0x001d);
+ if(ret_val) break;
+ }
ret_val = e1000_write_phy_reg(hw, 30, 0x00c1);
if(ret_val) break;
ret_val = e1000_write_phy_reg(hw, 30, 0x0000);
@@ -3310,8 +3829,17 @@
/* Cable Length Estimation and Local/Remote Receiver Information
* are only valid at 1000 Mbps.
*/
- phy_info->cable_length = ((phy_data & M88E1000_PSSR_CABLE_LENGTH) >>
- M88E1000_PSSR_CABLE_LENGTH_SHIFT);
+ if (hw->phy_type != e1000_phy_gg82563) {
+ phy_info->cable_length = ((phy_data & M88E1000_PSSR_CABLE_LENGTH) >>
+ M88E1000_PSSR_CABLE_LENGTH_SHIFT);
+ } else {
+ ret_val = e1000_read_phy_reg(hw, GG82563_PHY_DSP_DISTANCE,
+ &phy_data);
+ if (ret_val)
+ return ret_val;
+
+ phy_info->cable_length = phy_data & GG82563_DSPD_CABLE_LENGTH;
+ }
ret_val = e1000_read_phy_reg(hw, PHY_1000T_STATUS, &phy_data);
if(ret_val)
@@ -3392,7 +3920,8 @@
/******************************************************************************
* Sets up eeprom variables in the hw struct. Must be called after mac_type
- * is configured.
+ * is configured. Additionally, if this is ICH8, the flash controller GbE
+ * registers must be mapped, or this will crash.
*
* hw - Struct containing variables accessed by shared code
*****************************************************************************/
@@ -3505,6 +4034,20 @@
E1000_WRITE_REG(hw, EECD, eecd);
}
break;
+ case e1000_80003es2lan:
+ eeprom->type = e1000_eeprom_spi;
+ eeprom->opcode_bits = 8;
+ eeprom->delay_usec = 1;
+ if (eecd & E1000_EECD_ADDR_BITS) {
+ eeprom->page_size = 32;
+ eeprom->address_bits = 16;
+ } else {
+ eeprom->page_size = 8;
+ eeprom->address_bits = 8;
+ }
+ eeprom->use_eerd = TRUE;
+ eeprom->use_eewr = FALSE;
+ break;
default:
break;
}
@@ -3685,9 +4228,8 @@
DEBUGFUNC("e1000_acquire_eeprom");
- if(e1000_get_hw_eeprom_semaphore(hw))
- return -E1000_ERR_EEPROM;
-
+ if (e1000_swfw_sync_acquire(hw, E1000_SWFW_EEP_SM))
+ return -E1000_ERR_SWFW_SYNC;
eecd = E1000_READ_REG(hw, EECD);
if (hw->mac_type != e1000_82573) {
@@ -3706,7 +4248,7 @@
eecd &= ~E1000_EECD_REQ;
E1000_WRITE_REG(hw, EECD, eecd);
DEBUGOUT("Could not acquire EEPROM grant\n");
- e1000_put_hw_eeprom_semaphore(hw);
+ e1000_swfw_sync_release(hw, E1000_SWFW_EEP_SM);
return -E1000_ERR_EEPROM;
}
}
@@ -3829,7 +4371,7 @@
E1000_WRITE_REG(hw, EECD, eecd);
}
- e1000_put_hw_eeprom_semaphore(hw);
+ e1000_swfw_sync_release(hw, E1000_SWFW_EEP_SM);
}
/******************************************************************************
@@ -3908,6 +4450,8 @@
if (e1000_is_onboard_nvm_eeprom(hw) == TRUE &&
hw->eeprom.use_eerd == FALSE) {
switch (hw->mac_type) {
+ case e1000_80003es2lan:
+ break;
default:
/* Prepare the EEPROM for reading */
if (e1000_acquire_eeprom(hw) != E1000_SUCCESS)
@@ -4025,6 +4569,9 @@
uint32_t i = 0;
int32_t error = 0;
+ if (e1000_swfw_sync_acquire(hw, E1000_SWFW_EEP_SM))
+ return -E1000_ERR_SWFW_SYNC;
+
for (i = 0; i < words; i++) {
register_value = (data[i] << E1000_EEPROM_RW_REG_DATA) |
((offset+i) << E1000_EEPROM_RW_ADDR_SHIFT) |
@@ -4044,6 +4591,7 @@
}
}
+ e1000_swfw_sync_release(hw, E1000_SWFW_EEP_SM);
return error;
}
@@ -4085,6 +4633,8 @@
{
uint32_t eecd = 0;
+ DEBUGFUNC("e1000_is_onboard_nvm_eeprom");
+
if(hw->mac_type == e1000_82573) {
eecd = E1000_READ_REG(hw, EECD);
@@ -4511,6 +5061,7 @@
case e1000_82546:
case e1000_82546_rev_3:
case e1000_82571:
+ case e1000_80003es2lan:
if(E1000_READ_REG(hw, STATUS) & E1000_STATUS_FUNC_1)
hw->perm_mac_addr[5] ^= 0x01;
break;
@@ -4749,8 +5300,37 @@
rar_low = ((uint32_t) addr[0] |
((uint32_t) addr[1] << 8) |
((uint32_t) addr[2] << 16) | ((uint32_t) addr[3] << 24));
+ rar_high = ((uint32_t) addr[4] | ((uint32_t) addr[5] << 8));
- rar_high = ((uint32_t) addr[4] | ((uint32_t) addr[5] << 8) | E1000_RAH_AV);
+ /* Disable Rx and flush all Rx frames before enabling RSS to avoid Rx
+ * unit hang.
+ *
+ * Description:
+ * If there are any Rx frames queued up or otherwise present in the HW
+ * before RSS is enabled, and then we enable RSS, the HW Rx unit will
+ * hang. To work around this issue, we have to disable receives and
+ * flush out all Rx frames before we enable RSS. To do so, we modify we
+ * redirect all Rx traffic to manageability and then reset the HW.
+ * This flushes away Rx frames, and (since the redirections to
+ * manageability persists across resets) keeps new ones from coming in
+ * while we work. Then, we clear the Address Valid AV bit for all MAC
+ * addresses and undo the re-direction to manageability.
+ * Now, frames are coming in again, but the MAC won't accept them, so
+ * far so good. We now proceed to initialize RSS (if necessary) and
+ * configure the Rx unit. Last, we re-enable the AV bits and continue
+ * on our merry way.
+ */
+ switch (hw->mac_type) {
+ case e1000_82571:
+ case e1000_82572:
+ case e1000_80003es2lan:
+ if (hw->leave_av_bit_off == TRUE)
+ break;
+ default:
+ /* Indicate to hardware the Address is Valid. */
+ rar_high |= E1000_RAH_AV;
+ break;
+ }
E1000_WRITE_REG_ARRAY(hw, RA, (index << 1), rar_low);
E1000_WRITE_REG_ARRAY(hw, RA, ((index << 1) + 1), rar_high);
@@ -5330,6 +5910,7 @@
hw->bus_width = e1000_bus_width_pciex_1;
break;
case e1000_82571:
+ case e1000_80003es2lan:
hw->bus_type = e1000_bus_type_pci_express;
hw->bus_speed = e1000_bus_speed_2500;
hw->bus_width = e1000_bus_width_pciex_4;
@@ -5475,6 +6056,34 @@
return -E1000_ERR_PHY;
break;
}
+ } else if (hw->phy_type == e1000_phy_gg82563) {
+ ret_val = e1000_read_phy_reg(hw, GG82563_PHY_DSP_DISTANCE,
+ &phy_data);
+ if (ret_val)
+ return ret_val;
+ cable_length = phy_data & GG82563_DSPD_CABLE_LENGTH;
+
+ switch (cable_length) {
+ case e1000_gg_cable_length_60:
+ *min_length = 0;
+ *max_length = e1000_igp_cable_length_60;
+ break;
+ case e1000_gg_cable_length_60_115:
+ *min_length = e1000_igp_cable_length_60;
+ *max_length = e1000_igp_cable_length_115;
+ break;
+ case e1000_gg_cable_length_115_150:
+ *min_length = e1000_igp_cable_length_115;
+ *max_length = e1000_igp_cable_length_150;
+ break;
+ case e1000_gg_cable_length_150:
+ *min_length = e1000_igp_cable_length_150;
+ *max_length = e1000_igp_cable_length_180;
+ break;
+ default:
+ return -E1000_ERR_PHY;
+ break;
+ }
} else if(hw->phy_type == e1000_phy_igp) { /* For IGP PHY */
uint16_t agc_reg_array[IGP01E1000_PHY_CHANNEL_NUM] =
{IGP01E1000_PHY_AGC_A,
@@ -5584,7 +6193,8 @@
DEBUGFUNC("e1000_check_polarity");
- if(hw->phy_type == e1000_phy_m88) {
+ if ((hw->phy_type == e1000_phy_m88) ||
+ (hw->phy_type == e1000_phy_gg82563)) {
/* return the Polarity bit in the Status register. */
ret_val = e1000_read_phy_reg(hw, M88E1000_PHY_SPEC_STATUS,
&phy_data);
@@ -5653,7 +6263,8 @@
return ret_val;
hw->speed_downgraded = (phy_data & IGP01E1000_PLHR_SS_DOWNGRADE) ? 1 : 0;
- } else if(hw->phy_type == e1000_phy_m88) {
+ } else if ((hw->phy_type == e1000_phy_m88) ||
+ (hw->phy_type == e1000_phy_gg82563)) {
ret_val = e1000_read_phy_reg(hw, M88E1000_PHY_SPEC_STATUS,
&phy_data);
if(ret_val)
@@ -6686,6 +7297,7 @@
case e1000_82571:
case e1000_82572:
case e1000_82573:
+ case e1000_80003es2lan:
while(timeout) {
if (E1000_READ_REG(hw, EECD) & E1000_EECD_AUTO_RD) break;
else msec_delay(1);
@@ -6729,6 +7341,11 @@
default:
msec_delay(10);
break;
+ case e1000_80003es2lan:
+ /* Separate *_CFG_DONE_* bit for each port */
+ if (E1000_READ_REG(hw, STATUS) & E1000_STATUS_FUNC_1)
+ cfg_mask = E1000_EEPROM_CFG_DONE_PORT_1;
+ /* Fall Through */
case e1000_82571:
case e1000_82572:
while (timeout) {
@@ -6746,12 +7363,6 @@
break;
}
- /* PHY configuration from NVM just starts after EECD_AUTO_RD sets to high.
- * Need to wait for PHY configuration completion before accessing NVM
- * and PHY. */
- if (hw->mac_type == e1000_82573)
- msec_delay(25);
-
return E1000_SUCCESS;
}
@@ -6777,6 +7388,11 @@
if(!hw->eeprom_semaphore_present)
return E1000_SUCCESS;
+ if (hw->mac_type == e1000_80003es2lan) {
+ /* Get the SW semaphore. */
+ if (e1000_get_software_semaphore(hw) != E1000_SUCCESS)
+ return -E1000_ERR_EEPROM;
+ }
/* Get the FW semaphore. */
timeout = hw->eeprom.word_size + 1;
@@ -6822,10 +7438,75 @@
return;
swsm = E1000_READ_REG(hw, SWSM);
+ if (hw->mac_type == e1000_80003es2lan) {
+ /* Release both semaphores. */
+ swsm &= ~(E1000_SWSM_SMBI | E1000_SWSM_SWESMBI);
+ } else
swsm &= ~(E1000_SWSM_SWESMBI);
E1000_WRITE_REG(hw, SWSM, swsm);
}
+/***************************************************************************
+ *
+ * Obtaining software semaphore bit (SMBI) before resetting PHY.
+ *
+ * hw: Struct containing variables accessed by shared code
+ *
+ * returns: - E1000_ERR_RESET if fail to obtain semaphore.
+ * E1000_SUCCESS at any other case.
+ *
+ ***************************************************************************/
+int32_t
+e1000_get_software_semaphore(struct e1000_hw *hw)
+{
+ int32_t timeout = hw->eeprom.word_size + 1;
+ uint32_t swsm;
+
+ DEBUGFUNC("e1000_get_software_semaphore");
+
+ if (hw->mac_type != e1000_80003es2lan)
+ return E1000_SUCCESS;
+
+ while(timeout) {
+ swsm = E1000_READ_REG(hw, SWSM);
+ /* If SMBI bit cleared, it is now set and we hold the semaphore */
+ if(!(swsm & E1000_SWSM_SMBI))
+ break;
+ msec_delay_irq(1);
+ timeout--;
+ }
+
+ if(!timeout) {
+ DEBUGOUT("Driver can't access device - SMBI bit is set.\n");
+ return -E1000_ERR_RESET;
+ }
+
+ return E1000_SUCCESS;
+}
+
+/***************************************************************************
+ *
+ * Release semaphore bit (SMBI).
+ *
+ * hw: Struct containing variables accessed by shared code
+ *
+ ***************************************************************************/
+void
+e1000_release_software_semaphore(struct e1000_hw *hw)
+{
+ uint32_t swsm;
+
+ DEBUGFUNC("e1000_release_software_semaphore");
+
+ if (hw->mac_type != e1000_80003es2lan)
+ return;
+
+ swsm = E1000_READ_REG(hw, SWSM);
+ /* Release the SW semaphores.*/
+ swsm &= ~E1000_SWSM_SMBI;
+ E1000_WRITE_REG(hw, SWSM, swsm);
+}
+
/******************************************************************************
* Checks if PHY reset is blocked due to SOL/IDER session, for example.
* Returning E1000_BLK_PHY_RESET isn't necessarily an error. But it's up to
@@ -6862,6 +7543,7 @@
case e1000_82571:
case e1000_82572:
case e1000_82573:
+ case e1000_80003es2lan:
fwsm = E1000_READ_REG(hw, FWSM);
if((fwsm & E1000_FWSM_MODE_MASK) != 0)
return TRUE;
diff --git a/drivers/net/e1000/e1000_hw.h b/drivers/net/e1000/e1000_hw.h
index f1219dd..150e45e 100644
--- a/drivers/net/e1000/e1000_hw.h
+++ b/drivers/net/e1000/e1000_hw.h
@@ -60,6 +60,7 @@
e1000_82571,
e1000_82572,
e1000_82573,
+ e1000_80003es2lan,
e1000_num_macs
} e1000_mac_type;
@@ -139,6 +140,13 @@
} e1000_cable_length;
typedef enum {
+ e1000_gg_cable_length_60 = 0,
+ e1000_gg_cable_length_60_115 = 1,
+ e1000_gg_cable_length_115_150 = 2,
+ e1000_gg_cable_length_150 = 4
+} e1000_gg_cable_length;
+
+typedef enum {
e1000_igp_cable_length_10 = 10,
e1000_igp_cable_length_20 = 20,
e1000_igp_cable_length_30 = 30,
@@ -208,6 +216,7 @@
e1000_phy_m88 = 0,
e1000_phy_igp,
e1000_phy_igp_2,
+ e1000_phy_gg82563,
e1000_phy_undefined = 0xFF
} e1000_phy_type;
@@ -281,6 +290,7 @@
#define E1000_ERR_MASTER_REQUESTS_PENDING 10
#define E1000_ERR_HOST_INTERFACE_COMMAND 11
#define E1000_BLK_PHY_RESET 12
+#define E1000_ERR_SWFW_SYNC 13
/* Function prototypes */
/* Initialization */
@@ -304,6 +314,8 @@
int32_t e1000_phy_reset(struct e1000_hw *hw);
int32_t e1000_phy_get_info(struct e1000_hw *hw, struct e1000_phy_info *phy_info);
int32_t e1000_validate_mdi_setting(struct e1000_hw *hw);
+int32_t e1000_read_kmrn_reg(struct e1000_hw *hw, uint32_t reg_addr, uint16_t *data);
+int32_t e1000_write_kmrn_reg(struct e1000_hw *hw, uint32_t reg_addr, uint16_t data);
/* EEPROM Functions */
int32_t e1000_init_eeprom_params(struct e1000_hw *hw);
@@ -454,6 +466,8 @@
#define E1000_DEV_ID_82573E_IAMT 0x108C
#define E1000_DEV_ID_82573L 0x109A
#define E1000_DEV_ID_82546GB_QUAD_COPPER_KSP3 0x10B5
+#define E1000_DEV_ID_80003ES2LAN_COPPER_DPT 0x1096
+#define E1000_DEV_ID_80003ES2LAN_SERDES_DPT 0x1098
#define NODE_ADDRESS_SIZE 6
@@ -850,6 +864,7 @@
#define E1000_TXCW 0x00178 /* TX Configuration Word - RW */
#define E1000_RXCW 0x00180 /* RX Configuration Word - RO */
#define E1000_TCTL 0x00400 /* TX Control - RW */
+#define E1000_TCTL_EXT 0x00404 /* Extended TX Control - RW */
#define E1000_TIPG 0x00410 /* TX Inter-packet gap -RW */
#define E1000_TBT 0x00448 /* TX Burst Timer - RW */
#define E1000_AIT 0x00458 /* Adaptive Interframe Spacing Throttle - RW */
@@ -996,6 +1011,11 @@
#define E1000_FFMT 0x09000 /* Flexible Filter Mask Table - RW Array */
#define E1000_FFVT 0x09800 /* Flexible Filter Value Table - RW Array */
+#define E1000_KUMCTRLSTA 0x00034 /* MAC-PHY interface - RW */
+#define E1000_MDPHYA 0x0003C /* PHY address - RW */
+#define E1000_MANC2H 0x05860 /* Managment Control To Host - RW */
+#define E1000_SW_FW_SYNC 0x05B5C /* Software-Firmware Synchronization - RW */
+
#define E1000_GCR 0x05B00 /* PCI-Ex Control */
#define E1000_GSCL_1 0x05B10 /* PCI-Ex Statistic Control #1 */
#define E1000_GSCL_2 0x05B14 /* PCI-Ex Statistic Control #2 */
@@ -1065,6 +1085,7 @@
#define E1000_82542_RXCW E1000_RXCW
#define E1000_82542_MTA 0x00200
#define E1000_82542_TCTL E1000_TCTL
+#define E1000_82542_TCTL_EXT E1000_TCTL_EXT
#define E1000_82542_TIPG E1000_TIPG
#define E1000_82542_TDBAL 0x00420
#define E1000_82542_TDBAH 0x00424
@@ -1212,6 +1233,8 @@
#define E1000_82542_RSSRK E1000_RSSRK
#define E1000_82542_RSSIM E1000_RSSIM
#define E1000_82542_RSSIR E1000_RSSIR
+#define E1000_82542_KUMCTRLSTA E1000_KUMCTRLSTA
+#define E1000_82542_SW_FW_SYNC E1000_SW_FW_SYNC
/* Statistics counters collected by the MAC */
struct e1000_hw_stats {
@@ -1303,6 +1326,7 @@
e1000_ffe_config ffe_config_state;
uint32_t asf_firmware_present;
uint32_t eeprom_semaphore_present;
+ uint32_t swfw_sync_present;
unsigned long io_base;
uint32_t phy_id;
uint32_t phy_revision;
@@ -1361,6 +1385,7 @@
boolean_t ifs_params_forced;
boolean_t in_ifs_mode;
boolean_t mng_reg_access_disabled;
+ boolean_t leave_av_bit_off;
};
@@ -1393,6 +1418,8 @@
#define E1000_CTRL_FRCDPX 0x00001000 /* Force Duplex */
#define E1000_CTRL_D_UD_EN 0x00002000 /* Dock/Undock enable */
#define E1000_CTRL_D_UD_POLARITY 0x00004000 /* Defined polarity of Dock/Undock indication in SDP[0] */
+#define E1000_CTRL_FORCE_PHY_RESET 0x00008000 /* Reset both PHY ports, through PHYRST_N pin */
+#define E1000_CTRL_EXT_LINK_EN 0x00010000 /* enable link status from external LINK_0 and LINK_1 pins */
#define E1000_CTRL_SWDPIN0 0x00040000 /* SWDPIN 0 value */
#define E1000_CTRL_SWDPIN1 0x00080000 /* SWDPIN 1 value */
#define E1000_CTRL_SWDPIN2 0x00100000 /* SWDPIN 2 value */
@@ -1429,6 +1456,16 @@
#define E1000_STATUS_BUS64 0x00001000 /* In 64 bit slot */
#define E1000_STATUS_PCIX_MODE 0x00002000 /* PCI-X mode */
#define E1000_STATUS_PCIX_SPEED 0x0000C000 /* PCI-X bus speed */
+#define E1000_STATUS_BMC_SKU_0 0x00100000 /* BMC USB redirect disabled */
+#define E1000_STATUS_BMC_SKU_1 0x00200000 /* BMC SRAM disabled */
+#define E1000_STATUS_BMC_SKU_2 0x00400000 /* BMC SDRAM disabled */
+#define E1000_STATUS_BMC_CRYPTO 0x00800000 /* BMC crypto disabled */
+#define E1000_STATUS_BMC_LITE 0x01000000 /* BMC external code execution disabled */
+#define E1000_STATUS_RGMII_ENABLE 0x02000000 /* RGMII disabled */
+#define E1000_STATUS_FUSE_8 0x04000000
+#define E1000_STATUS_FUSE_9 0x08000000
+#define E1000_STATUS_SERDES0_DIS 0x10000000 /* SERDES disabled on port 0 */
+#define E1000_STATUS_SERDES1_DIS 0x20000000 /* SERDES disabled on port 1 */
/* Constants used to intrepret the masked PCI-X bus speed. */
#define E1000_STATUS_PCIX_SPEED_66 0x00000000 /* PCI-X bus speed 50-66 MHz */
@@ -1506,6 +1543,8 @@
#define E1000_CTRL_EXT_LINK_MODE_MASK 0x00C00000
#define E1000_CTRL_EXT_LINK_MODE_GMII 0x00000000
#define E1000_CTRL_EXT_LINK_MODE_TBI 0x00C00000
+#define E1000_CTRL_EXT_LINK_MODE_KMRN 0x00000000
+#define E1000_CTRL_EXT_LINK_MODE_SERDES 0x00C00000
#define E1000_CTRL_EXT_WR_WMARK_MASK 0x03000000
#define E1000_CTRL_EXT_WR_WMARK_256 0x00000000
#define E1000_CTRL_EXT_WR_WMARK_320 0x01000000
@@ -1515,6 +1554,9 @@
#define E1000_CTRL_EXT_DRV_LOAD 0x10000000 /* Driver loaded bit for FW */
#define E1000_CTRL_EXT_IAME 0x08000000 /* Interrupt acknowledge Auto-mask */
#define E1000_CTRL_EXT_INT_TIMER_CLR 0x20000000 /* Clear Interrupt timers after IMS clear */
+#define E1000_CRTL_EXT_PB_PAREN 0x01000000 /* packet buffer parity error detection enabled */
+#define E1000_CTRL_EXT_DF_PAREN 0x02000000 /* descriptor FIFO parity error detection enable */
+#define E1000_CTRL_EXT_GHOST_PAREN 0x40000000
/* MDI Control */
#define E1000_MDIC_DATA_MASK 0x0000FFFF
@@ -1528,6 +1570,32 @@
#define E1000_MDIC_INT_EN 0x20000000
#define E1000_MDIC_ERROR 0x40000000
+#define E1000_KUMCTRLSTA_MASK 0x0000FFFF
+#define E1000_KUMCTRLSTA_OFFSET 0x001F0000
+#define E1000_KUMCTRLSTA_OFFSET_SHIFT 16
+#define E1000_KUMCTRLSTA_REN 0x00200000
+
+#define E1000_KUMCTRLSTA_OFFSET_FIFO_CTRL 0x00000000
+#define E1000_KUMCTRLSTA_OFFSET_CTRL 0x00000001
+#define E1000_KUMCTRLSTA_OFFSET_INB_CTRL 0x00000002
+#define E1000_KUMCTRLSTA_OFFSET_DIAG 0x00000003
+#define E1000_KUMCTRLSTA_OFFSET_TIMEOUTS 0x00000004
+#define E1000_KUMCTRLSTA_OFFSET_INB_PARAM 0x00000009
+#define E1000_KUMCTRLSTA_OFFSET_HD_CTRL 0x00000010
+#define E1000_KUMCTRLSTA_OFFSET_M2P_SERDES 0x0000001E
+#define E1000_KUMCTRLSTA_OFFSET_M2P_MODES 0x0000001F
+
+/* FIFO Control */
+#define E1000_KUMCTRLSTA_FIFO_CTRL_RX_BYPASS 0x00000008
+#define E1000_KUMCTRLSTA_FIFO_CTRL_TX_BYPASS 0x00000800
+
+/* In-Band Control */
+#define E1000_KUMCTRLSTA_INB_CTRL_DIS_PADDING 0x00000010
+
+/* Half-Duplex Control */
+#define E1000_KUMCTRLSTA_HD_CTRL_10_100_DEFAULT 0x00000004
+#define E1000_KUMCTRLSTA_HD_CTRL_1000_DEFAULT 0x00000000
+
/* LED Control */
#define E1000_LEDCTL_LED0_MODE_MASK 0x0000000F
#define E1000_LEDCTL_LED0_MODE_SHIFT 0
@@ -1590,6 +1658,13 @@
#define E1000_ICR_MNG 0x00040000 /* Manageability event */
#define E1000_ICR_DOCK 0x00080000 /* Dock/Undock */
#define E1000_ICR_INT_ASSERTED 0x80000000 /* If this bit asserted, the driver should claim the interrupt */
+#define E1000_ICR_RXD_FIFO_PAR0 0x00100000 /* queue 0 Rx descriptor FIFO parity error */
+#define E1000_ICR_TXD_FIFO_PAR0 0x00200000 /* queue 0 Tx descriptor FIFO parity error */
+#define E1000_ICR_HOST_ARB_PAR 0x00400000 /* host arb read buffer parity error */
+#define E1000_ICR_PB_PAR 0x00800000 /* packet buffer parity error */
+#define E1000_ICR_RXD_FIFO_PAR1 0x01000000 /* queue 1 Rx descriptor FIFO parity error */
+#define E1000_ICR_TXD_FIFO_PAR1 0x02000000 /* queue 1 Tx descriptor FIFO parity error */
+#define E1000_ICR_ALL_PARITY 0x03F00000 /* all parity error bits */
/* Interrupt Cause Set */
#define E1000_ICS_TXDW E1000_ICR_TXDW /* Transmit desc written back */
@@ -1610,6 +1685,12 @@
#define E1000_ICS_ACK E1000_ICR_ACK /* Receive Ack frame */
#define E1000_ICS_MNG E1000_ICR_MNG /* Manageability event */
#define E1000_ICS_DOCK E1000_ICR_DOCK /* Dock/Undock */
+#define E1000_ICS_RXD_FIFO_PAR0 E1000_ICR_RXD_FIFO_PAR0 /* queue 0 Rx descriptor FIFO parity error */
+#define E1000_ICS_TXD_FIFO_PAR0 E1000_ICR_TXD_FIFO_PAR0 /* queue 0 Tx descriptor FIFO parity error */
+#define E1000_ICS_HOST_ARB_PAR E1000_ICR_HOST_ARB_PAR /* host arb read buffer parity error */
+#define E1000_ICS_PB_PAR E1000_ICR_PB_PAR /* packet buffer parity error */
+#define E1000_ICS_RXD_FIFO_PAR1 E1000_ICR_RXD_FIFO_PAR1 /* queue 1 Rx descriptor FIFO parity error */
+#define E1000_ICS_TXD_FIFO_PAR1 E1000_ICR_TXD_FIFO_PAR1 /* queue 1 Tx descriptor FIFO parity error */
/* Interrupt Mask Set */
#define E1000_IMS_TXDW E1000_ICR_TXDW /* Transmit desc written back */
@@ -1630,6 +1711,12 @@
#define E1000_IMS_ACK E1000_ICR_ACK /* Receive Ack frame */
#define E1000_IMS_MNG E1000_ICR_MNG /* Manageability event */
#define E1000_IMS_DOCK E1000_ICR_DOCK /* Dock/Undock */
+#define E1000_IMS_RXD_FIFO_PAR0 E1000_ICR_RXD_FIFO_PAR0 /* queue 0 Rx descriptor FIFO parity error */
+#define E1000_IMS_TXD_FIFO_PAR0 E1000_ICR_TXD_FIFO_PAR0 /* queue 0 Tx descriptor FIFO parity error */
+#define E1000_IMS_HOST_ARB_PAR E1000_ICR_HOST_ARB_PAR /* host arb read buffer parity error */
+#define E1000_IMS_PB_PAR E1000_ICR_PB_PAR /* packet buffer parity error */
+#define E1000_IMS_RXD_FIFO_PAR1 E1000_ICR_RXD_FIFO_PAR1 /* queue 1 Rx descriptor FIFO parity error */
+#define E1000_IMS_TXD_FIFO_PAR1 E1000_ICR_TXD_FIFO_PAR1 /* queue 1 Tx descriptor FIFO parity error */
/* Interrupt Mask Clear */
#define E1000_IMC_TXDW E1000_ICR_TXDW /* Transmit desc written back */
@@ -1650,6 +1737,12 @@
#define E1000_IMC_ACK E1000_ICR_ACK /* Receive Ack frame */
#define E1000_IMC_MNG E1000_ICR_MNG /* Manageability event */
#define E1000_IMC_DOCK E1000_ICR_DOCK /* Dock/Undock */
+#define E1000_IMC_RXD_FIFO_PAR0 E1000_ICR_RXD_FIFO_PAR0 /* queue 0 Rx descriptor FIFO parity error */
+#define E1000_IMC_TXD_FIFO_PAR0 E1000_ICR_TXD_FIFO_PAR0 /* queue 0 Tx descriptor FIFO parity error */
+#define E1000_IMC_HOST_ARB_PAR E1000_ICR_HOST_ARB_PAR /* host arb read buffer parity error */
+#define E1000_IMC_PB_PAR E1000_ICR_PB_PAR /* packet buffer parity error */
+#define E1000_IMC_RXD_FIFO_PAR1 E1000_ICR_RXD_FIFO_PAR1 /* queue 1 Rx descriptor FIFO parity error */
+#define E1000_IMC_TXD_FIFO_PAR1 E1000_ICR_TXD_FIFO_PAR1 /* queue 1 Tx descriptor FIFO parity error */
/* Receive Control */
#define E1000_RCTL_RST 0x00000001 /* Software reset */
@@ -1719,6 +1812,12 @@
#define E1000_PSRCTL_BSIZE2_SHIFT 6 /* Shift _left_ 6 */
#define E1000_PSRCTL_BSIZE3_SHIFT 14 /* Shift _left_ 14 */
+/* SW_W_SYNC definitions */
+#define E1000_SWFW_EEP_SM 0x0001
+#define E1000_SWFW_PHY0_SM 0x0002
+#define E1000_SWFW_PHY1_SM 0x0004
+#define E1000_SWFW_MAC_CSR_SM 0x0008
+
/* Receive Descriptor */
#define E1000_RDT_DELAY 0x0000ffff /* Delay timer (1=1024us) */
#define E1000_RDT_FPDB 0x80000000 /* Flush descriptor block */
@@ -1797,6 +1896,11 @@
#define E1000_TCTL_RTLC 0x01000000 /* Re-transmit on late collision */
#define E1000_TCTL_NRTU 0x02000000 /* No Re-transmit on underrun */
#define E1000_TCTL_MULR 0x10000000 /* Multiple request support */
+/* Extended Transmit Control */
+#define E1000_TCTL_EXT_BST_MASK 0x000003FF /* Backoff Slot Time */
+#define E1000_TCTL_EXT_GCEX_MASK 0x000FFC00 /* Gigabit Carry Extend Padding */
+
+#define DEFAULT_80003ES2LAN_TCTL_EXT_GCEX 0x00010000
/* Receive Checksum Control */
#define E1000_RXCSUM_PCSS_MASK 0x000000FF /* Packet Checksum Start */
@@ -1874,6 +1978,7 @@
#define E1000_MANC_TCO_RESET 0x00010000 /* TCO Reset Occurred */
#define E1000_MANC_RCV_TCO_EN 0x00020000 /* Receive TCO Packets Enabled */
#define E1000_MANC_REPORT_STATUS 0x00040000 /* Status Reporting Enabled */
+#define E1000_MANC_RCV_ALL 0x00080000 /* Receive All Enabled */
#define E1000_MANC_BLK_PHY_RST_ON_IDE 0x00040000 /* Block phy resets */
#define E1000_MANC_EN_MAC_ADDR_FILTER 0x00100000 /* Enable MAC address
* filtering */
@@ -1962,19 +2067,19 @@
/* PCI-Ex registers */
/* PCI-Ex Control Register */
-#define E1000_GCR_RXD_NO_SNOOP 0x00000001
-#define E1000_GCR_RXDSCW_NO_SNOOP 0x00000002
-#define E1000_GCR_RXDSCR_NO_SNOOP 0x00000004
-#define E1000_GCR_TXD_NO_SNOOP 0x00000008
-#define E1000_GCR_TXDSCW_NO_SNOOP 0x00000010
-#define E1000_GCR_TXDSCR_NO_SNOOP 0x00000020
+#define E1000_GCR_RXD_NO_SNOOP 0x00000001
+#define E1000_GCR_RXDSCW_NO_SNOOP 0x00000002
+#define E1000_GCR_RXDSCR_NO_SNOOP 0x00000004
+#define E1000_GCR_TXD_NO_SNOOP 0x00000008
+#define E1000_GCR_TXDSCW_NO_SNOOP 0x00000010
+#define E1000_GCR_TXDSCR_NO_SNOOP 0x00000020
-#define PCI_EX_NO_SNOOP_ALL (E1000_GCR_RXD_NO_SNOOP | \
- E1000_GCR_RXDSCW_NO_SNOOP | \
- E1000_GCR_RXDSCR_NO_SNOOP | \
- E1000_GCR TXD_NO_SNOOP | \
- E1000_GCR_TXDSCW_NO_SNOOP | \
- E1000_GCR_TXDSCR_NO_SNOOP)
+#define PCI_EX_NO_SNOOP_ALL (E1000_GCR_RXD_NO_SNOOP | \
+ E1000_GCR_RXDSCW_NO_SNOOP | \
+ E1000_GCR_RXDSCR_NO_SNOOP | \
+ E1000_GCR_TXD_NO_SNOOP | \
+ E1000_GCR_TXDSCW_NO_SNOOP | \
+ E1000_GCR_TXDSCR_NO_SNOOP)
#define E1000_GCR_L1_ACT_WITHOUT_L0S_RX 0x08000000
/* Function Active and Power State to MNG */
@@ -2035,12 +2140,14 @@
#define EEPROM_INIT_CONTROL1_REG 0x000A
#define EEPROM_INIT_CONTROL2_REG 0x000F
#define EEPROM_INIT_CONTROL3_PORT_B 0x0014
+#define EEPROM_INIT_3GIO_3 0x001A
#define EEPROM_INIT_CONTROL3_PORT_A 0x0024
#define EEPROM_CFG 0x0012
#define EEPROM_FLASH_VERSION 0x0032
#define EEPROM_CHECKSUM_REG 0x003F
#define E1000_EEPROM_CFG_DONE 0x00040000 /* MNG config cycle done */
+#define E1000_EEPROM_CFG_DONE_PORT_1 0x00080000 /* ...for second port */
/* Word definitions for ID LED Settings */
#define ID_LED_RESERVED_0000 0x0000
@@ -2084,6 +2191,9 @@
#define EEPROM_WORD0F_ANE 0x0800
#define EEPROM_WORD0F_SWPDIO_EXT 0x00F0
+/* Mask bits for fields in Word 0x1a of the EEPROM */
+#define EEPROM_WORD1A_ASPM_MASK 0x000C
+
/* For checksumming, the sum of all words in the EEPROM should equal 0xBABA. */
#define EEPROM_SUM 0xBABA
@@ -2126,8 +2236,11 @@
#define DEFAULT_82542_TIPG_IPGR2 10
#define DEFAULT_82543_TIPG_IPGR2 6
+#define DEFAULT_80003ES2LAN_TIPG_IPGR2 7
#define E1000_TIPG_IPGR2_SHIFT 20
+#define DEFAULT_80003ES2LAN_TIPG_IPGT_10_100 0x00000009
+#define DEFAULT_80003ES2LAN_TIPG_IPGT_1000 0x00000008
#define E1000_TXDMAC_DPP 0x00000001
/* Adaptive IFS defines */
@@ -2368,6 +2481,78 @@
#define IGP01E1000_ANALOG_REGS_PAGE 0x20C0
+/* Bits...
+ * 15-5: page
+ * 4-0: register offset
+ */
+#define GG82563_PAGE_SHIFT 5
+#define GG82563_REG(page, reg) \
+ (((page) << GG82563_PAGE_SHIFT) | ((reg) & MAX_PHY_REG_ADDRESS))
+#define GG82563_MIN_ALT_REG 30
+
+/* GG82563 Specific Registers */
+#define GG82563_PHY_SPEC_CTRL \
+ GG82563_REG(0, 16) /* PHY Specific Control */
+#define GG82563_PHY_SPEC_STATUS \
+ GG82563_REG(0, 17) /* PHY Specific Status */
+#define GG82563_PHY_INT_ENABLE \
+ GG82563_REG(0, 18) /* Interrupt Enable */
+#define GG82563_PHY_SPEC_STATUS_2 \
+ GG82563_REG(0, 19) /* PHY Specific Status 2 */
+#define GG82563_PHY_RX_ERR_CNTR \
+ GG82563_REG(0, 21) /* Receive Error Counter */
+#define GG82563_PHY_PAGE_SELECT \
+ GG82563_REG(0, 22) /* Page Select */
+#define GG82563_PHY_SPEC_CTRL_2 \
+ GG82563_REG(0, 26) /* PHY Specific Control 2 */
+#define GG82563_PHY_PAGE_SELECT_ALT \
+ GG82563_REG(0, 29) /* Alternate Page Select */
+#define GG82563_PHY_TEST_CLK_CTRL \
+ GG82563_REG(0, 30) /* Test Clock Control (use reg. 29 to select) */
+
+#define GG82563_PHY_MAC_SPEC_CTRL \
+ GG82563_REG(2, 21) /* MAC Specific Control Register */
+#define GG82563_PHY_MAC_SPEC_CTRL_2 \
+ GG82563_REG(2, 26) /* MAC Specific Control 2 */
+
+#define GG82563_PHY_DSP_DISTANCE \
+ GG82563_REG(5, 26) /* DSP Distance */
+
+/* Page 193 - Port Control Registers */
+#define GG82563_PHY_KMRN_MODE_CTRL \
+ GG82563_REG(193, 16) /* Kumeran Mode Control */
+#define GG82563_PHY_PORT_RESET \
+ GG82563_REG(193, 17) /* Port Reset */
+#define GG82563_PHY_REVISION_ID \
+ GG82563_REG(193, 18) /* Revision ID */
+#define GG82563_PHY_DEVICE_ID \
+ GG82563_REG(193, 19) /* Device ID */
+#define GG82563_PHY_PWR_MGMT_CTRL \
+ GG82563_REG(193, 20) /* Power Management Control */
+#define GG82563_PHY_RATE_ADAPT_CTRL \
+ GG82563_REG(193, 25) /* Rate Adaptation Control */
+
+/* Page 194 - KMRN Registers */
+#define GG82563_PHY_KMRN_FIFO_CTRL_STAT \
+ GG82563_REG(194, 16) /* FIFO's Control/Status */
+#define GG82563_PHY_KMRN_CTRL \
+ GG82563_REG(194, 17) /* Control */
+#define GG82563_PHY_INBAND_CTRL \
+ GG82563_REG(194, 18) /* Inband Control */
+#define GG82563_PHY_KMRN_DIAGNOSTIC \
+ GG82563_REG(194, 19) /* Diagnostic */
+#define GG82563_PHY_ACK_TIMEOUTS \
+ GG82563_REG(194, 20) /* Acknowledge Timeouts */
+#define GG82563_PHY_ADV_ABILITY \
+ GG82563_REG(194, 21) /* Advertised Ability */
+#define GG82563_PHY_LINK_PARTNER_ADV_ABILITY \
+ GG82563_REG(194, 23) /* Link Partner Advertised Ability */
+#define GG82563_PHY_ADV_NEXT_PAGE \
+ GG82563_REG(194, 24) /* Advertised Next Page */
+#define GG82563_PHY_LINK_PARTNER_ADV_NEXT_PAGE \
+ GG82563_REG(194, 25) /* Link Partner Advertised Next page */
+#define GG82563_PHY_KMRN_MISC \
+ GG82563_REG(194, 26) /* Misc. */
/* PHY Control Register */
#define MII_CR_SPEED_SELECT_MSB 0x0040 /* bits 6,13: 10=1000, 01=100, 00=10 */
@@ -2681,6 +2866,113 @@
#define IGP01E1000_ANALOG_FUSE_FINE_1 0x0080
#define IGP01E1000_ANALOG_FUSE_FINE_10 0x0500
+/* GG82563 PHY Specific Status Register (Page 0, Register 16 */
+#define GG82563_PSCR_DISABLE_JABBER 0x0001 /* 1=Disable Jabber */
+#define GG82563_PSCR_POLARITY_REVERSAL_DISABLE 0x0002 /* 1=Polarity Reversal Disabled */
+#define GG82563_PSCR_POWER_DOWN 0x0004 /* 1=Power Down */
+#define GG82563_PSCR_COPPER_TRANSMITER_DISABLE 0x0008 /* 1=Transmitter Disabled */
+#define GG82563_PSCR_CROSSOVER_MODE_MASK 0x0060
+#define GG82563_PSCR_CROSSOVER_MODE_MDI 0x0000 /* 00=Manual MDI configuration */
+#define GG82563_PSCR_CROSSOVER_MODE_MDIX 0x0020 /* 01=Manual MDIX configuration */
+#define GG82563_PSCR_CROSSOVER_MODE_AUTO 0x0060 /* 11=Automatic crossover */
+#define GG82563_PSCR_ENALBE_EXTENDED_DISTANCE 0x0080 /* 1=Enable Extended Distance */
+#define GG82563_PSCR_ENERGY_DETECT_MASK 0x0300
+#define GG82563_PSCR_ENERGY_DETECT_OFF 0x0000 /* 00,01=Off */
+#define GG82563_PSCR_ENERGY_DETECT_RX 0x0200 /* 10=Sense on Rx only (Energy Detect) */
+#define GG82563_PSCR_ENERGY_DETECT_RX_TM 0x0300 /* 11=Sense and Tx NLP */
+#define GG82563_PSCR_FORCE_LINK_GOOD 0x0400 /* 1=Force Link Good */
+#define GG82563_PSCR_DOWNSHIFT_ENABLE 0x0800 /* 1=Enable Downshift */
+#define GG82563_PSCR_DOWNSHIFT_COUNTER_MASK 0x7000
+#define GG82563_PSCR_DOWNSHIFT_COUNTER_SHIFT 12
+
+/* PHY Specific Status Register (Page 0, Register 17) */
+#define GG82563_PSSR_JABBER 0x0001 /* 1=Jabber */
+#define GG82563_PSSR_POLARITY 0x0002 /* 1=Polarity Reversed */
+#define GG82563_PSSR_LINK 0x0008 /* 1=Link is Up */
+#define GG82563_PSSR_ENERGY_DETECT 0x0010 /* 1=Sleep, 0=Active */
+#define GG82563_PSSR_DOWNSHIFT 0x0020 /* 1=Downshift */
+#define GG82563_PSSR_CROSSOVER_STATUS 0x0040 /* 1=MDIX, 0=MDI */
+#define GG82563_PSSR_RX_PAUSE_ENABLED 0x0100 /* 1=Receive Pause Enabled */
+#define GG82563_PSSR_TX_PAUSE_ENABLED 0x0200 /* 1=Transmit Pause Enabled */
+#define GG82563_PSSR_LINK_UP 0x0400 /* 1=Link Up */
+#define GG82563_PSSR_SPEED_DUPLEX_RESOLVED 0x0800 /* 1=Resolved */
+#define GG82563_PSSR_PAGE_RECEIVED 0x1000 /* 1=Page Received */
+#define GG82563_PSSR_DUPLEX 0x2000 /* 1-Full-Duplex */
+#define GG82563_PSSR_SPEED_MASK 0xC000
+#define GG82563_PSSR_SPEED_10MBPS 0x0000 /* 00=10Mbps */
+#define GG82563_PSSR_SPEED_100MBPS 0x4000 /* 01=100Mbps */
+#define GG82563_PSSR_SPEED_1000MBPS 0x8000 /* 10=1000Mbps */
+
+/* PHY Specific Status Register 2 (Page 0, Register 19) */
+#define GG82563_PSSR2_JABBER 0x0001 /* 1=Jabber */
+#define GG82563_PSSR2_POLARITY_CHANGED 0x0002 /* 1=Polarity Changed */
+#define GG82563_PSSR2_ENERGY_DETECT_CHANGED 0x0010 /* 1=Energy Detect Changed */
+#define GG82563_PSSR2_DOWNSHIFT_INTERRUPT 0x0020 /* 1=Downshift Detected */
+#define GG82563_PSSR2_MDI_CROSSOVER_CHANGE 0x0040 /* 1=Crossover Changed */
+#define GG82563_PSSR2_FALSE_CARRIER 0x0100 /* 1=False Carrier */
+#define GG82563_PSSR2_SYMBOL_ERROR 0x0200 /* 1=Symbol Error */
+#define GG82563_PSSR2_LINK_STATUS_CHANGED 0x0400 /* 1=Link Status Changed */
+#define GG82563_PSSR2_AUTO_NEG_COMPLETED 0x0800 /* 1=Auto-Neg Completed */
+#define GG82563_PSSR2_PAGE_RECEIVED 0x1000 /* 1=Page Received */
+#define GG82563_PSSR2_DUPLEX_CHANGED 0x2000 /* 1=Duplex Changed */
+#define GG82563_PSSR2_SPEED_CHANGED 0x4000 /* 1=Speed Changed */
+#define GG82563_PSSR2_AUTO_NEG_ERROR 0x8000 /* 1=Auto-Neg Error */
+
+/* PHY Specific Control Register 2 (Page 0, Register 26) */
+#define GG82563_PSCR2_10BT_POLARITY_FORCE 0x0002 /* 1=Force Negative Polarity */
+#define GG82563_PSCR2_1000MB_TEST_SELECT_MASK 0x000C
+#define GG82563_PSCR2_1000MB_TEST_SELECT_NORMAL 0x0000 /* 00,01=Normal Operation */
+#define GG82563_PSCR2_1000MB_TEST_SELECT_112NS 0x0008 /* 10=Select 112ns Sequence */
+#define GG82563_PSCR2_1000MB_TEST_SELECT_16NS 0x000C /* 11=Select 16ns Sequence */
+#define GG82563_PSCR2_REVERSE_AUTO_NEG 0x2000 /* 1=Reverse Auto-Negotiation */
+#define GG82563_PSCR2_1000BT_DISABLE 0x4000 /* 1=Disable 1000BASE-T */
+#define GG82563_PSCR2_TRANSMITER_TYPE_MASK 0x8000
+#define GG82563_PSCR2_TRANSMITTER_TYPE_CLASS_B 0x0000 /* 0=Class B */
+#define GG82563_PSCR2_TRANSMITTER_TYPE_CLASS_A 0x8000 /* 1=Class A */
+
+/* MAC Specific Control Register (Page 2, Register 21) */
+/* Tx clock speed for Link Down and 1000BASE-T for the following speeds */
+#define GG82563_MSCR_TX_CLK_MASK 0x0007
+#define GG82563_MSCR_TX_CLK_10MBPS_2_5MHZ 0x0004
+#define GG82563_MSCR_TX_CLK_100MBPS_25MHZ 0x0005
+#define GG82563_MSCR_TX_CLK_1000MBPS_2_5MHZ 0x0006
+#define GG82563_MSCR_TX_CLK_1000MBPS_25MHZ 0x0007
+
+#define GG82563_MSCR_ASSERT_CRS_ON_TX 0x0010 /* 1=Assert */
+
+/* DSP Distance Register (Page 5, Register 26) */
+#define GG82563_DSPD_CABLE_LENGTH 0x0007 /* 0 = <50M;
+ 1 = 50-80M;
+ 2 = 80-110M;
+ 3 = 110-140M;
+ 4 = >140M */
+
+/* Kumeran Mode Control Register (Page 193, Register 16) */
+#define GG82563_KMCR_PHY_LEDS_EN 0x0020 /* 1=PHY LEDs, 0=Kumeran Inband LEDs */
+#define GG82563_KMCR_FORCE_LINK_UP 0x0040 /* 1=Force Link Up */
+#define GG82563_KMCR_SUPPRESS_SGMII_EPD_EXT 0x0080
+#define GG82563_KMCR_MDIO_BUS_SPEED_SELECT_MASK 0x0400
+#define GG82563_KMCR_MDIO_BUS_SPEED_SELECT 0x0400 /* 1=6.25MHz, 0=0.8MHz */
+#define GG82563_KMCR_PASS_FALSE_CARRIER 0x0800
+
+/* Power Management Control Register (Page 193, Register 20) */
+#define GG82563_PMCR_ENABLE_ELECTRICAL_IDLE 0x0001 /* 1=Enalbe SERDES Electrical Idle */
+#define GG82563_PMCR_DISABLE_PORT 0x0002 /* 1=Disable Port */
+#define GG82563_PMCR_DISABLE_SERDES 0x0004 /* 1=Disable SERDES */
+#define GG82563_PMCR_REVERSE_AUTO_NEG 0x0008 /* 1=Enable Reverse Auto-Negotiation */
+#define GG82563_PMCR_DISABLE_1000_NON_D0 0x0010 /* 1=Disable 1000Mbps Auto-Neg in non D0 */
+#define GG82563_PMCR_DISABLE_1000 0x0020 /* 1=Disable 1000Mbps Auto-Neg Always */
+#define GG82563_PMCR_REVERSE_AUTO_NEG_D0A 0x0040 /* 1=Enable D0a Reverse Auto-Negotiation */
+#define GG82563_PMCR_FORCE_POWER_STATE 0x0080 /* 1=Force Power State */
+#define GG82563_PMCR_PROGRAMMED_POWER_STATE_MASK 0x0300
+#define GG82563_PMCR_PROGRAMMED_POWER_STATE_DR 0x0000 /* 00=Dr */
+#define GG82563_PMCR_PROGRAMMED_POWER_STATE_D0U 0x0100 /* 01=D0u */
+#define GG82563_PMCR_PROGRAMMED_POWER_STATE_D0A 0x0200 /* 10=D0a */
+#define GG82563_PMCR_PROGRAMMED_POWER_STATE_D3 0x0300 /* 11=D3 */
+
+/* In-Band Control Register (Page 194, Register 18) */
+#define GG82563_ICR_DIS_PADDING 0x0010 /* Disable Padding Use */
+
/* Bit definitions for valid PHY IDs. */
/* I = Integrated
@@ -2695,6 +2987,7 @@
#define M88E1011_I_REV_4 0x04
#define M88E1111_I_PHY_ID 0x01410CC0
#define L1LXT971A_PHY_ID 0x001378E0
+#define GG82563_E_PHY_ID 0x01410CA0
/* Miscellaneous PHY bit definitions. */
#define PHY_PREAMBLE 0xFFFFFFFF
diff --git a/drivers/net/e1000/e1000_main.c b/drivers/net/e1000/e1000_main.c
index 5b7d0f4..9adaf5f 100644
--- a/drivers/net/e1000/e1000_main.c
+++ b/drivers/net/e1000/e1000_main.c
@@ -29,6 +29,23 @@
#include "e1000.h"
/* Change Log
+ * 7.0.33 3-Feb-2006
+ * o Added another fix for the pass false carrier bit
+ * 7.0.32 24-Jan-2006
+ * o Need to rebuild with noew version number for the pass false carrier
+ * fix in e1000_hw.c
+ * 7.0.30 18-Jan-2006
+ * o fixup for tso workaround to disable it for pci-x
+ * o fix mem leak on 82542
+ * o fixes for 10 Mb/s connections and incorrect stats
+ * 7.0.28 01/06/2006
+ * o hardware workaround to only set "speed mode" bit for 1G link.
+ * 7.0.26 12/23/2005
+ * o wake on lan support modified for device ID 10B5
+ * o fix dhcp + vlan issue not making it to the iAMT firmware
+ * 7.0.24 12/9/2005
+ * o New hardware support for the Gigabit NIC embedded in the south bridge
+ * o Fixes to the recycling logic (skb->tail) from IBM LTC
* 6.3.9 12/16/2005
* o incorporate fix for recycled skbs from IBM LTC
* 6.3.7 11/18/2005
@@ -46,54 +63,8 @@
* rx_buffer_len
* 6.3.1 9/19/05
* o Use adapter->tx_timeout_factor in Tx Hung Detect logic
- (e1000_clean_tx_irq)
+ * (e1000_clean_tx_irq)
* o Support for 8086:10B5 device (Quad Port)
- * 6.2.14 9/15/05
- * o In AMT enabled configurations, set/reset DRV_LOAD bit on interface
- * open/close
- * 6.2.13 9/14/05
- * o Invoke e1000_check_mng_mode only for 8257x controllers since it
- * accesses the FWSM that is not supported in other controllers
- * 6.2.12 9/9/05
- * o Add support for device id E1000_DEV_ID_82546GB_QUAD_COPPER
- * o set RCTL:SECRC only for controllers newer than 82543.
- * o When the n/w interface comes down reset DRV_LOAD bit to notify f/w.
- * This code was moved from e1000_remove to e1000_close
- * 6.2.10 9/6/05
- * o Fix error in updating RDT in el1000_alloc_rx_buffers[_ps] -- one off.
- * o Enable fc by default on 82573 controllers (do not read eeprom)
- * o Fix rx_errors statistic not to include missed_packet_count
- * o Fix rx_dropped statistic not to include missed_packet_count
- (Padraig Brady)
- * 6.2.9 8/30/05
- * o Remove call to update statistics from the controller ib e1000_get_stats
- * 6.2.8 8/30/05
- * o Improved algorithm for rx buffer allocation/rdt update
- * o Flow control watermarks relative to rx PBA size
- * o Simplified 'Tx Hung' detect logic
- * 6.2.7 8/17/05
- * o Report rx buffer allocation failures and tx timeout counts in stats
- * 6.2.6 8/16/05
- * o Implement workaround for controller erratum -- linear non-tso packet
- * following a TSO gets written back prematurely
- * 6.2.5 8/15/05
- * o Set netdev->tx_queue_len based on link speed/duplex settings.
- * o Fix net_stats.rx_fifo_errors <p@draigBrady.com>
- * o Do not power off PHY if SoL/IDER session is active
- * 6.2.4 8/10/05
- * o Fix loopback test setup/cleanup for 82571/3 controllers
- * o Fix parsing of outgoing packets (e1000_transfer_dhcp_info) to treat
- * all packets as raw
- * o Prevent operations that will cause the PHY to be reset if SoL/IDER
- * sessions are active and log a message
- * 6.2.2 7/21/05
- * o used fixed size descriptors for all MTU sizes, reduces memory load
- * 6.1.2 4/13/05
- * o Fixed ethtool diagnostics
- * o Enabled flow control to take default eeprom settings
- * o Added stats_lock around e1000_read_phy_reg commands to avoid concurrent
- * calls, one from mii_ioctl and other from within update_stats while
- * processing MIIREG ioctl.
*/
char e1000_driver_name[] = "e1000";
@@ -103,7 +74,7 @@
#else
#define DRIVERNAPI "-NAPI"
#endif
-#define DRV_VERSION "6.3.9-k4"DRIVERNAPI
+#define DRV_VERSION "7.0.33-k2"DRIVERNAPI
char e1000_driver_version[] = DRV_VERSION;
static char e1000_copyright[] = "Copyright (c) 1999-2005 Intel Corporation.";
@@ -157,9 +128,12 @@
INTEL_E1000_ETHERNET_DEVICE(0x108A),
INTEL_E1000_ETHERNET_DEVICE(0x108B),
INTEL_E1000_ETHERNET_DEVICE(0x108C),
+ INTEL_E1000_ETHERNET_DEVICE(0x1096),
+ INTEL_E1000_ETHERNET_DEVICE(0x1098),
INTEL_E1000_ETHERNET_DEVICE(0x1099),
INTEL_E1000_ETHERNET_DEVICE(0x109A),
INTEL_E1000_ETHERNET_DEVICE(0x10B5),
+ INTEL_E1000_ETHERNET_DEVICE(0x10B9),
/* required last entry */
{0,}
};
@@ -175,13 +149,13 @@
void e1000_free_all_tx_resources(struct e1000_adapter *adapter);
void e1000_free_all_rx_resources(struct e1000_adapter *adapter);
static int e1000_setup_tx_resources(struct e1000_adapter *adapter,
- struct e1000_tx_ring *txdr);
+ struct e1000_tx_ring *txdr);
static int e1000_setup_rx_resources(struct e1000_adapter *adapter,
- struct e1000_rx_ring *rxdr);
+ struct e1000_rx_ring *rxdr);
static void e1000_free_tx_resources(struct e1000_adapter *adapter,
- struct e1000_tx_ring *tx_ring);
+ struct e1000_tx_ring *tx_ring);
static void e1000_free_rx_resources(struct e1000_adapter *adapter,
- struct e1000_rx_ring *rx_ring);
+ struct e1000_rx_ring *rx_ring);
void e1000_update_stats(struct e1000_adapter *adapter);
/* Local Function Prototypes */
@@ -191,9 +165,6 @@
static int e1000_probe(struct pci_dev *pdev, const struct pci_device_id *ent);
static void __devexit e1000_remove(struct pci_dev *pdev);
static int e1000_alloc_queues(struct e1000_adapter *adapter);
-#ifdef CONFIG_E1000_MQ
-static void e1000_setup_queue_mapping(struct e1000_adapter *adapter);
-#endif
static int e1000_sw_init(struct e1000_adapter *adapter);
static int e1000_open(struct net_device *netdev);
static int e1000_close(struct net_device *netdev);
@@ -245,7 +216,7 @@
static void e1000_enter_82542_rst(struct e1000_adapter *adapter);
static void e1000_leave_82542_rst(struct e1000_adapter *adapter);
static void e1000_tx_timeout(struct net_device *dev);
-static void e1000_tx_timeout_task(struct net_device *dev);
+static void e1000_reset_task(struct net_device *dev);
static void e1000_smartspeed(struct e1000_adapter *adapter);
static inline int e1000_82547_fifo_workaround(struct e1000_adapter *adapter,
struct sk_buff *skb);
@@ -265,10 +236,6 @@
static void e1000_netpoll (struct net_device *netdev);
#endif
-#ifdef CONFIG_E1000_MQ
-/* for multiple Rx queues */
-void e1000_rx_schedule(void *data);
-#endif
/* Exported from other modules */
@@ -380,7 +347,8 @@
(vid != old_vid) &&
!adapter->vlgrp->vlan_devices[old_vid])
e1000_vlan_rx_kill_vid(netdev, old_vid);
- }
+ } else
+ adapter->mng_vlan_id = vid;
}
}
@@ -502,10 +470,6 @@
return err;
}
-#ifdef CONFIG_E1000_MQ
- e1000_setup_queue_mapping(adapter);
-#endif
-
adapter->tx_queue_len = netdev->tx_queue_len;
mod_timer(&adapter->watchdog_timer, jiffies);
@@ -526,9 +490,7 @@
e1000_check_mng_mode(&adapter->hw);
e1000_irq_disable(adapter);
-#ifdef CONFIG_E1000_MQ
- while (atomic_read(&adapter->rx_sched_call_data.count) != 0);
-#endif
+
free_irq(adapter->pdev->irq, netdev);
#ifdef CONFIG_PCI_MSI
if (adapter->hw.mac_type > e1000_82547_rev_2 &&
@@ -587,6 +549,7 @@
break;
case e1000_82571:
case e1000_82572:
+ case e1000_80003es2lan:
pba = E1000_PBA_38K;
break;
case e1000_82573:
@@ -619,7 +582,10 @@
adapter->hw.fc_high_water = fc_high_water_mark;
adapter->hw.fc_low_water = fc_high_water_mark - 8;
- adapter->hw.fc_pause_time = E1000_FC_PAUSE_TIME;
+ if (adapter->hw.mac_type == e1000_80003es2lan)
+ adapter->hw.fc_pause_time = 0xFFFF;
+ else
+ adapter->hw.fc_pause_time = E1000_FC_PAUSE_TIME;
adapter->hw.fc_send_xon = 1;
adapter->hw.fc = adapter->hw.original_fc;
@@ -663,6 +629,7 @@
unsigned long mmio_start, mmio_len;
static int cards_found = 0;
+ static int e1000_ksp3_port_a = 0; /* global ksp3 port a indication */
int i, err, pci_using_dac;
uint16_t eeprom_data;
uint16_t eeprom_apme_mask = E1000_EEPROM_APME;
@@ -755,6 +722,15 @@
if ((err = e1000_check_phy_reset_block(&adapter->hw)))
DPRINTK(PROBE, INFO, "PHY reset is blocked due to SOL/IDER session.\n");
+ /* if ksp3, indicate if it's port a being setup */
+ if (pdev->device == E1000_DEV_ID_82546GB_QUAD_COPPER_KSP3 &&
+ e1000_ksp3_port_a == 0)
+ adapter->ksp3_port_a = 1;
+ e1000_ksp3_port_a++;
+ /* Reset for multiple KP3 adapters */
+ if (e1000_ksp3_port_a == 4)
+ e1000_ksp3_port_a = 0;
+
if (adapter->hw.mac_type >= e1000_82543) {
netdev->features = NETIF_F_SG |
NETIF_F_HW_CSUM |
@@ -826,8 +802,8 @@
adapter->phy_info_timer.function = &e1000_update_phy_info;
adapter->phy_info_timer.data = (unsigned long) adapter;
- INIT_WORK(&adapter->tx_timeout_task,
- (void (*)(void *))e1000_tx_timeout_task, netdev);
+ INIT_WORK(&adapter->reset_task,
+ (void (*)(void *))e1000_reset_task, netdev);
/* we're going to reset, so assume we have no link for now */
@@ -854,6 +830,7 @@
case e1000_82546:
case e1000_82546_rev_3:
case e1000_82571:
+ case e1000_80003es2lan:
if (E1000_READ_REG(&adapter->hw, STATUS) & E1000_STATUS_FUNC_1){
e1000_read_eeprom(&adapter->hw,
EEPROM_INIT_CONTROL3_PORT_B, 1, &eeprom_data);
@@ -972,10 +949,6 @@
iounmap(adapter->hw.hw_addr);
pci_release_regions(pdev);
-#ifdef CONFIG_E1000_MQ
- free_percpu(adapter->cpu_netdev);
- free_percpu(adapter->cpu_tx_ring);
-#endif
free_netdev(netdev);
pci_disable_device(pdev);
@@ -1056,40 +1029,8 @@
hw->master_slave = E1000_MASTER_SLAVE;
}
-#ifdef CONFIG_E1000_MQ
- /* Number of supported queues */
- switch (hw->mac_type) {
- case e1000_82571:
- case e1000_82572:
- /* These controllers support 2 tx queues, but with a single
- * qdisc implementation, multiple tx queues aren't quite as
- * interesting. If we can find a logical way of mapping
- * flows to a queue, then perhaps we can up the num_tx_queue
- * count back to its default. Until then, we run the risk of
- * terrible performance due to SACK overload. */
- adapter->num_tx_queues = 1;
- adapter->num_rx_queues = 2;
- break;
- default:
- adapter->num_tx_queues = 1;
- adapter->num_rx_queues = 1;
- break;
- }
- adapter->num_rx_queues = min(adapter->num_rx_queues, num_online_cpus());
- adapter->num_tx_queues = min(adapter->num_tx_queues, num_online_cpus());
- DPRINTK(DRV, INFO, "Multiqueue Enabled: Rx Queue count = %u %s\n",
- adapter->num_rx_queues,
- ((adapter->num_rx_queues == 1)
- ? ((num_online_cpus() > 1)
- ? "(due to unsupported feature in current adapter)"
- : "(due to unsupported system configuration)")
- : ""));
- DPRINTK(DRV, INFO, "Multiqueue Enabled: Tx Queue count = %u\n",
- adapter->num_tx_queues);
-#else
adapter->num_tx_queues = 1;
adapter->num_rx_queues = 1;
-#endif
if (e1000_alloc_queues(adapter)) {
DPRINTK(PROBE, ERR, "Unable to allocate memory for queues\n");
@@ -1152,51 +1093,9 @@
memset(adapter->polling_netdev, 0, size);
#endif
-#ifdef CONFIG_E1000_MQ
- adapter->rx_sched_call_data.func = e1000_rx_schedule;
- adapter->rx_sched_call_data.info = adapter->netdev;
-
- adapter->cpu_netdev = alloc_percpu(struct net_device *);
- adapter->cpu_tx_ring = alloc_percpu(struct e1000_tx_ring *);
-#endif
-
return E1000_SUCCESS;
}
-#ifdef CONFIG_E1000_MQ
-static void __devinit
-e1000_setup_queue_mapping(struct e1000_adapter *adapter)
-{
- int i, cpu;
-
- adapter->rx_sched_call_data.func = e1000_rx_schedule;
- adapter->rx_sched_call_data.info = adapter->netdev;
- cpus_clear(adapter->rx_sched_call_data.cpumask);
-
- adapter->cpu_netdev = alloc_percpu(struct net_device *);
- adapter->cpu_tx_ring = alloc_percpu(struct e1000_tx_ring *);
-
- lock_cpu_hotplug();
- i = 0;
- for_each_online_cpu(cpu) {
- *per_cpu_ptr(adapter->cpu_tx_ring, cpu) = &adapter->tx_ring[i % adapter->num_tx_queues];
- /* This is incomplete because we'd like to assign separate
- * physical cpus to these netdev polling structures and
- * avoid saturating a subset of cpus.
- */
- if (i < adapter->num_rx_queues) {
- *per_cpu_ptr(adapter->cpu_netdev, cpu) = &adapter->polling_netdev[i];
- adapter->rx_ring[i].cpu = cpu;
- cpu_set(cpu, adapter->cpumask);
- } else
- *per_cpu_ptr(adapter->cpu_netdev, cpu) = NULL;
-
- i++;
- }
- unlock_cpu_hotplug();
-}
-#endif
-
/**
* e1000_open - Called when a network interface is made active
* @netdev: network interface device structure
@@ -1435,18 +1334,6 @@
/* Setup the HW Tx Head and Tail descriptor pointers */
switch (adapter->num_tx_queues) {
- case 2:
- tdba = adapter->tx_ring[1].dma;
- tdlen = adapter->tx_ring[1].count *
- sizeof(struct e1000_tx_desc);
- E1000_WRITE_REG(hw, TDBAL1, (tdba & 0x00000000ffffffffULL));
- E1000_WRITE_REG(hw, TDBAH1, (tdba >> 32));
- E1000_WRITE_REG(hw, TDLEN1, tdlen);
- E1000_WRITE_REG(hw, TDH1, 0);
- E1000_WRITE_REG(hw, TDT1, 0);
- adapter->tx_ring[1].tdh = E1000_TDH1;
- adapter->tx_ring[1].tdt = E1000_TDT1;
- /* Fall Through */
case 1:
default:
tdba = adapter->tx_ring[0].dma;
@@ -1477,6 +1364,10 @@
ipgr1 = DEFAULT_82542_TIPG_IPGR1;
ipgr2 = DEFAULT_82542_TIPG_IPGR2;
break;
+ case e1000_80003es2lan:
+ ipgr1 = DEFAULT_82543_TIPG_IPGR1;
+ ipgr2 = DEFAULT_80003ES2LAN_TIPG_IPGR2;
+ break;
default:
ipgr1 = DEFAULT_82543_TIPG_IPGR1;
ipgr2 = DEFAULT_82543_TIPG_IPGR2;
@@ -1497,10 +1388,13 @@
tctl = E1000_READ_REG(hw, TCTL);
tctl &= ~E1000_TCTL_CT;
- tctl |= E1000_TCTL_EN | E1000_TCTL_PSP | E1000_TCTL_RTLC |
+ tctl |= E1000_TCTL_PSP | E1000_TCTL_RTLC |
(E1000_COLLISION_THRESHOLD << E1000_CT_SHIFT);
- E1000_WRITE_REG(hw, TCTL, tctl);
+#ifdef DISABLE_MULR
+ /* disable Multiple Reads for debugging */
+ tctl &= ~E1000_TCTL_MULR;
+#endif
if (hw->mac_type == e1000_82571 || hw->mac_type == e1000_82572) {
tarc = E1000_READ_REG(hw, TARC0);
@@ -1513,6 +1407,15 @@
else
tarc |= (1 << 28);
E1000_WRITE_REG(hw, TARC1, tarc);
+ } else if (hw->mac_type == e1000_80003es2lan) {
+ tarc = E1000_READ_REG(hw, TARC0);
+ tarc |= 1;
+ if (hw->media_type == e1000_media_type_internal_serdes)
+ tarc |= (1 << 20);
+ E1000_WRITE_REG(hw, TARC0, tarc);
+ tarc = E1000_READ_REG(hw, TARC1);
+ tarc |= 1;
+ E1000_WRITE_REG(hw, TARC1, tarc);
}
e1000_config_collision_dist(hw);
@@ -1531,6 +1434,9 @@
if (hw->mac_type == e1000_82544 &&
hw->bus_type == e1000_bus_type_pcix)
adapter->pcix_82544 = 1;
+
+ E1000_WRITE_REG(hw, TCTL, tctl);
+
}
/**
@@ -1790,12 +1696,9 @@
uint64_t rdba;
struct e1000_hw *hw = &adapter->hw;
uint32_t rdlen, rctl, rxcsum, ctrl_ext;
-#ifdef CONFIG_E1000_MQ
- uint32_t reta, mrqc;
- int i;
-#endif
if (adapter->rx_ps_pages) {
+ /* this is a 32 byte descriptor */
rdlen = adapter->rx_ring[0].count *
sizeof(union e1000_rx_desc_packet_split);
adapter->clean_rx = e1000_clean_rx_irq_ps;
@@ -1837,18 +1740,6 @@
/* Setup the HW Rx Head and Tail Descriptor Pointers and
* the Base and Length of the Rx Descriptor Ring */
switch (adapter->num_rx_queues) {
-#ifdef CONFIG_E1000_MQ
- case 2:
- rdba = adapter->rx_ring[1].dma;
- E1000_WRITE_REG(hw, RDBAL1, (rdba & 0x00000000ffffffffULL));
- E1000_WRITE_REG(hw, RDBAH1, (rdba >> 32));
- E1000_WRITE_REG(hw, RDLEN1, rdlen);
- E1000_WRITE_REG(hw, RDH1, 0);
- E1000_WRITE_REG(hw, RDT1, 0);
- adapter->rx_ring[1].rdh = E1000_RDH1;
- adapter->rx_ring[1].rdt = E1000_RDT1;
- /* Fall Through */
-#endif
case 1:
default:
rdba = adapter->rx_ring[0].dma;
@@ -1862,46 +1753,6 @@
break;
}
-#ifdef CONFIG_E1000_MQ
- if (adapter->num_rx_queues > 1) {
- uint32_t random[10];
-
- get_random_bytes(&random[0], 40);
-
- if (hw->mac_type <= e1000_82572) {
- E1000_WRITE_REG(hw, RSSIR, 0);
- E1000_WRITE_REG(hw, RSSIM, 0);
- }
-
- switch (adapter->num_rx_queues) {
- case 2:
- default:
- reta = 0x00800080;
- mrqc = E1000_MRQC_ENABLE_RSS_2Q;
- break;
- }
-
- /* Fill out redirection table */
- for (i = 0; i < 32; i++)
- E1000_WRITE_REG_ARRAY(hw, RETA, i, reta);
- /* Fill out hash function seeds */
- for (i = 0; i < 10; i++)
- E1000_WRITE_REG_ARRAY(hw, RSSRK, i, random[i]);
-
- mrqc |= (E1000_MRQC_RSS_FIELD_IPV4 |
- E1000_MRQC_RSS_FIELD_IPV4_TCP);
- E1000_WRITE_REG(hw, MRQC, mrqc);
- }
-
- /* Multiqueue and packet checksumming are mutually exclusive. */
- if (hw->mac_type >= e1000_82571) {
- rxcsum = E1000_READ_REG(hw, RXCSUM);
- rxcsum |= E1000_RXCSUM_PCSD;
- E1000_WRITE_REG(hw, RXCSUM, rxcsum);
- }
-
-#else
-
/* Enable 82543 Receive Checksum Offload for TCP and UDP */
if (hw->mac_type >= e1000_82543) {
rxcsum = E1000_READ_REG(hw, RXCSUM);
@@ -1920,7 +1771,6 @@
}
E1000_WRITE_REG(hw, RXCSUM, rxcsum);
}
-#endif /* CONFIG_E1000_MQ */
if (hw->mac_type == e1000_82573)
E1000_WRITE_REG(hw, ERT, 0x0100);
@@ -2392,7 +2242,7 @@
{
struct net_device *netdev = adapter->netdev;
struct e1000_tx_ring *txdr = adapter->tx_ring;
- uint32_t link;
+ uint32_t link, tctl;
e1000_check_for_link(&adapter->hw);
if (adapter->hw.mac_type == e1000_82573) {
@@ -2418,20 +2268,61 @@
adapter->link_duplex == FULL_DUPLEX ?
"Full Duplex" : "Half Duplex");
- /* tweak tx_queue_len according to speed/duplex */
+ /* tweak tx_queue_len according to speed/duplex
+ * and adjust the timeout factor */
netdev->tx_queue_len = adapter->tx_queue_len;
adapter->tx_timeout_factor = 1;
- if (adapter->link_duplex == HALF_DUPLEX) {
+ adapter->txb2b = 1;
+ switch (adapter->link_speed) {
+ case SPEED_10:
+ adapter->txb2b = 0;
+ netdev->tx_queue_len = 10;
+ adapter->tx_timeout_factor = 8;
+ break;
+ case SPEED_100:
+ adapter->txb2b = 0;
+ netdev->tx_queue_len = 100;
+ /* maybe add some timeout factor ? */
+ break;
+ }
+
+ if ((adapter->hw.mac_type == e1000_82571 ||
+ adapter->hw.mac_type == e1000_82572) &&
+ adapter->txb2b == 0) {
+#define SPEED_MODE_BIT (1 << 21)
+ uint32_t tarc0;
+ tarc0 = E1000_READ_REG(&adapter->hw, TARC0);
+ tarc0 &= ~SPEED_MODE_BIT;
+ E1000_WRITE_REG(&adapter->hw, TARC0, tarc0);
+ }
+
+#ifdef NETIF_F_TSO
+ /* disable TSO for pcie and 10/100 speeds, to avoid
+ * some hardware issues */
+ if (!adapter->tso_force &&
+ adapter->hw.bus_type == e1000_bus_type_pci_express){
switch (adapter->link_speed) {
case SPEED_10:
- netdev->tx_queue_len = 10;
- adapter->tx_timeout_factor = 8;
- break;
case SPEED_100:
- netdev->tx_queue_len = 100;
+ DPRINTK(PROBE,INFO,
+ "10/100 speed: disabling TSO\n");
+ netdev->features &= ~NETIF_F_TSO;
+ break;
+ case SPEED_1000:
+ netdev->features |= NETIF_F_TSO;
+ break;
+ default:
+ /* oops */
break;
}
}
+#endif
+
+ /* enable transmits in the hardware, need to do this
+ * after setting TARC0 */
+ tctl = E1000_READ_REG(&adapter->hw, TCTL);
+ tctl |= E1000_TCTL_EN;
+ E1000_WRITE_REG(&adapter->hw, TCTL, tctl);
netif_carrier_on(netdev);
netif_wake_queue(netdev);
@@ -2446,6 +2337,16 @@
netif_carrier_off(netdev);
netif_stop_queue(netdev);
mod_timer(&adapter->phy_info_timer, jiffies + 2 * HZ);
+
+ /* 80003ES2LAN workaround--
+ * For packet buffer work-around on link down event;
+ * disable receives in the ISR and
+ * reset device here in the watchdog
+ */
+ if (adapter->hw.mac_type == e1000_80003es2lan) {
+ /* reset device */
+ schedule_work(&adapter->reset_task);
+ }
}
e1000_smartspeed(adapter);
@@ -2465,16 +2366,14 @@
e1000_update_adaptive(&adapter->hw);
-#ifdef CONFIG_E1000_MQ
- txdr = *per_cpu_ptr(adapter->cpu_tx_ring, smp_processor_id());
-#endif
if (!netif_carrier_ok(netdev)) {
if (E1000_DESC_UNUSED(txdr) + 1 < txdr->count) {
/* We've lost link, so the controller stops DMA,
* but we've got queued Tx work that's never going
* to get done, so reset controller to flush Tx.
* (Do the reset outside of interrupt context). */
- schedule_work(&adapter->tx_timeout_task);
+ adapter->tx_timeout_count++;
+ schedule_work(&adapter->reset_task);
}
}
@@ -2649,9 +2548,9 @@
/* Workaround for Controller erratum --
* descriptor for non-tso packet in a linear SKB that follows a
* tso gets written back prematurely before the data is fully
- * DMAd to the controller */
+ * DMA'd to the controller */
if (!skb->data_len && tx_ring->last_tx_tso &&
- !skb_shinfo(skb)->tso_size) {
+ !skb_shinfo(skb)->tso_size) {
tx_ring->last_tx_tso = 0;
size -= 4;
}
@@ -2840,7 +2739,7 @@
E1000_MNG_DHCP_COOKIE_STATUS_VLAN_SUPPORT)) )
return 0;
}
- if ((skb->len > MINIMUM_DHCP_PACKET_SIZE) && (!skb->protocol)) {
+ if (skb->len > MINIMUM_DHCP_PACKET_SIZE) {
struct ethhdr *eth = (struct ethhdr *) skb->data;
if ((htons(ETH_P_IP) == eth->h_proto)) {
const struct iphdr *ip =
@@ -2881,11 +2780,7 @@
unsigned int f;
len -= skb->data_len;
-#ifdef CONFIG_E1000_MQ
- tx_ring = *per_cpu_ptr(adapter->cpu_tx_ring, smp_processor_id());
-#else
tx_ring = adapter->tx_ring;
-#endif
if (unlikely(skb->len <= 0)) {
dev_kfree_skb_any(skb);
@@ -2905,21 +2800,29 @@
max_per_txd = min(mss << 2, max_per_txd);
max_txd_pwr = fls(max_per_txd) - 1;
- /* TSO Workaround for 82571/2 Controllers -- if skb->data
+ /* TSO Workaround for 82571/2/3 Controllers -- if skb->data
* points to just header, pull a few bytes of payload from
* frags into skb->data */
hdr_len = ((skb->h.raw - skb->data) + (skb->h.th->doff << 2));
- if (skb->data_len && (hdr_len == (skb->len - skb->data_len)) &&
- (adapter->hw.mac_type == e1000_82571 ||
- adapter->hw.mac_type == e1000_82572)) {
- unsigned int pull_size;
- pull_size = min((unsigned int)4, skb->data_len);
- if (!__pskb_pull_tail(skb, pull_size)) {
- printk(KERN_ERR "__pskb_pull_tail failed.\n");
- dev_kfree_skb_any(skb);
- return -EFAULT;
+ if (skb->data_len && (hdr_len == (skb->len - skb->data_len))) {
+ switch (adapter->hw.mac_type) {
+ unsigned int pull_size;
+ case e1000_82571:
+ case e1000_82572:
+ case e1000_82573:
+ pull_size = min((unsigned int)4, skb->data_len);
+ if (!__pskb_pull_tail(skb, pull_size)) {
+ printk(KERN_ERR
+ "__pskb_pull_tail failed.\n");
+ dev_kfree_skb_any(skb);
+ return -EFAULT;
+ }
+ len = skb->len - skb->data_len;
+ break;
+ default:
+ /* do nothing */
+ break;
}
- len = skb->len - skb->data_len;
}
}
@@ -2935,7 +2838,7 @@
#ifdef NETIF_F_TSO
/* Controller Erratum workaround */
if (!skb->data_len && tx_ring->last_tx_tso &&
- !skb_shinfo(skb)->tso_size)
+ !skb_shinfo(skb)->tso_size)
count++;
#endif
@@ -2958,7 +2861,9 @@
if (adapter->pcix_82544)
count += nr_frags;
- if (adapter->hw.tx_pkt_filtering && (adapter->hw.mac_type == e1000_82573) )
+
+ if (adapter->hw.tx_pkt_filtering &&
+ (adapter->hw.mac_type == e1000_82573))
e1000_transfer_dhcp_info(adapter, skb);
local_irq_save(flags);
@@ -3036,15 +2941,15 @@
struct e1000_adapter *adapter = netdev_priv(netdev);
/* Do the reset outside of interrupt context */
- schedule_work(&adapter->tx_timeout_task);
+ adapter->tx_timeout_count++;
+ schedule_work(&adapter->reset_task);
}
static void
-e1000_tx_timeout_task(struct net_device *netdev)
+e1000_reset_task(struct net_device *netdev)
{
struct e1000_adapter *adapter = netdev_priv(netdev);
- adapter->tx_timeout_count++;
e1000_down(adapter);
e1000_up(adapter);
}
@@ -3079,6 +2984,7 @@
{
struct e1000_adapter *adapter = netdev_priv(netdev);
int max_frame = new_mtu + ENET_HEADER_SIZE + ETHERNET_FCS_SIZE;
+ uint16_t eeprom_data = 0;
if ((max_frame < MINIMUM_ETHERNET_FRAME_SIZE) ||
(max_frame > MAX_JUMBO_FRAME_SIZE)) {
@@ -3090,14 +2996,28 @@
switch (adapter->hw.mac_type) {
case e1000_82542_rev2_0:
case e1000_82542_rev2_1:
- case e1000_82573:
if (max_frame > MAXIMUM_ETHERNET_FRAME_SIZE) {
DPRINTK(PROBE, ERR, "Jumbo Frames not supported.\n");
return -EINVAL;
}
break;
+ case e1000_82573:
+ /* only enable jumbo frames if ASPM is disabled completely
+ * this means both bits must be zero in 0x1A bits 3:2 */
+ e1000_read_eeprom(&adapter->hw, EEPROM_INIT_3GIO_3, 1,
+ &eeprom_data);
+ if (eeprom_data & EEPROM_WORD1A_ASPM_MASK) {
+ if (max_frame > MAXIMUM_ETHERNET_FRAME_SIZE) {
+ DPRINTK(PROBE, ERR,
+ "Jumbo Frames not supported.\n");
+ return -EINVAL;
+ }
+ break;
+ }
+ /* fall through to get support */
case e1000_82571:
case e1000_82572:
+ case e1000_80003es2lan:
#define MAX_STD_JUMBO_FRAME_SIZE 9234
if (max_frame > MAX_STD_JUMBO_FRAME_SIZE) {
DPRINTK(PROBE, ERR, "MTU > 9216 not supported.\n");
@@ -3251,11 +3171,15 @@
/* Rx Errors */
+ /* RLEC on some newer hardware can be incorrect so build
+ * our own version based on RUC and ROC */
adapter->net_stats.rx_errors = adapter->stats.rxerrc +
adapter->stats.crcerrs + adapter->stats.algnerrc +
- adapter->stats.rlec + adapter->stats.cexterr;
+ adapter->stats.ruc + adapter->stats.roc +
+ adapter->stats.cexterr;
adapter->net_stats.rx_dropped = 0;
- adapter->net_stats.rx_length_errors = adapter->stats.rlec;
+ adapter->net_stats.rx_length_errors = adapter->stats.ruc +
+ adapter->stats.roc;
adapter->net_stats.rx_crc_errors = adapter->stats.crcerrs;
adapter->net_stats.rx_frame_errors = adapter->stats.algnerrc;
adapter->net_stats.rx_missed_errors = adapter->stats.mpc;
@@ -3288,29 +3212,6 @@
spin_unlock_irqrestore(&adapter->stats_lock, flags);
}
-#ifdef CONFIG_E1000_MQ
-void
-e1000_rx_schedule(void *data)
-{
- struct net_device *poll_dev, *netdev = data;
- struct e1000_adapter *adapter = netdev->priv;
- int this_cpu = get_cpu();
-
- poll_dev = *per_cpu_ptr(adapter->cpu_netdev, this_cpu);
- if (poll_dev == NULL) {
- put_cpu();
- return;
- }
-
- if (likely(netif_rx_schedule_prep(poll_dev)))
- __netif_rx_schedule(poll_dev);
- else
- e1000_irq_enable(adapter);
-
- put_cpu();
-}
-#endif
-
/**
* e1000_intr - Interrupt Handler
* @irq: interrupt number
@@ -3324,7 +3225,7 @@
struct net_device *netdev = data;
struct e1000_adapter *adapter = netdev_priv(netdev);
struct e1000_hw *hw = &adapter->hw;
- uint32_t icr = E1000_READ_REG(hw, ICR);
+ uint32_t rctl, icr = E1000_READ_REG(hw, ICR);
#ifndef CONFIG_E1000_NAPI
int i;
#else
@@ -3346,6 +3247,17 @@
if (unlikely(icr & (E1000_ICR_RXSEQ | E1000_ICR_LSC))) {
hw->get_link_status = 1;
+ /* 80003ES2LAN workaround--
+ * For packet buffer work-around on link down event;
+ * disable receives here in the ISR and
+ * reset adapter in watchdog
+ */
+ if (netif_carrier_ok(netdev) &&
+ (adapter->hw.mac_type == e1000_80003es2lan)) {
+ /* disable receives */
+ rctl = E1000_READ_REG(hw, RCTL);
+ E1000_WRITE_REG(hw, RCTL, rctl & ~E1000_RCTL_EN);
+ }
mod_timer(&adapter->watchdog_timer, jiffies);
}
@@ -3355,26 +3267,11 @@
E1000_WRITE_REG(hw, IMC, ~0);
E1000_WRITE_FLUSH(hw);
}
-#ifdef CONFIG_E1000_MQ
- if (atomic_read(&adapter->rx_sched_call_data.count) == 0) {
- /* We must setup the cpumask once count == 0 since
- * each cpu bit is cleared when the work is done. */
- adapter->rx_sched_call_data.cpumask = adapter->cpumask;
- atomic_add(adapter->num_rx_queues - 1, &adapter->irq_sem);
- atomic_set(&adapter->rx_sched_call_data.count,
- adapter->num_rx_queues);
- smp_call_async_mask(&adapter->rx_sched_call_data);
- } else {
- printk("call_data.count == %u\n", atomic_read(&adapter->rx_sched_call_data.count));
- }
-#else /* if !CONFIG_E1000_MQ */
if (likely(netif_rx_schedule_prep(&adapter->polling_netdev[0])))
__netif_rx_schedule(&adapter->polling_netdev[0]);
else
e1000_irq_enable(adapter);
-#endif /* CONFIG_E1000_MQ */
-
-#else /* if !CONFIG_E1000_NAPI */
+#else
/* Writing IMC and IMS is needed for 82547.
* Due to Hub Link bus being occupied, an interrupt
* de-assertion message is not able to be sent.
@@ -3398,7 +3295,7 @@
if (hw->mac_type == e1000_82547 || hw->mac_type == e1000_82547_rev_2)
e1000_irq_enable(adapter);
-#endif /* CONFIG_E1000_NAPI */
+#endif
return IRQ_HANDLED;
}
@@ -3474,6 +3371,9 @@
struct e1000_tx_desc *tx_desc, *eop_desc;
struct e1000_buffer *buffer_info;
unsigned int i, eop;
+#ifdef CONFIG_E1000_NAPI
+ unsigned int count = 0;
+#endif
boolean_t cleaned = FALSE;
i = tx_ring->next_to_clean;
@@ -3486,21 +3386,20 @@
buffer_info = &tx_ring->buffer_info[i];
cleaned = (i == eop);
-#ifdef CONFIG_E1000_MQ
- tx_ring->tx_stats.bytes += buffer_info->length;
-#endif
e1000_unmap_and_free_tx_resource(adapter, buffer_info);
memset(tx_desc, 0, sizeof(struct e1000_tx_desc));
if (unlikely(++i == tx_ring->count)) i = 0;
}
-#ifdef CONFIG_E1000_MQ
- tx_ring->tx_stats.packets++;
-#endif
eop = tx_ring->buffer_info[i].next_to_watch;
eop_desc = E1000_TX_DESC(*tx_ring, eop);
+#ifdef CONFIG_E1000_NAPI
+#define E1000_TX_WEIGHT 64
+ /* weight of a sort for tx, to avoid endless transmit cleanup */
+ if (count++ == E1000_TX_WEIGHT) break;
+#endif
}
tx_ring->next_to_clean = i;
@@ -3519,7 +3418,7 @@
adapter->detect_tx_hung = FALSE;
if (tx_ring->buffer_info[eop].dma &&
time_after(jiffies, tx_ring->buffer_info[eop].time_stamp +
- adapter->tx_timeout_factor * HZ)
+ (adapter->tx_timeout_factor * HZ))
&& !(E1000_READ_REG(&adapter->hw, STATUS) &
E1000_STATUS_TXOFF)) {
@@ -3644,10 +3543,15 @@
skb = buffer_info->skb;
buffer_info->skb = NULL;
+ prefetch(skb->data - NET_IP_ALIGN);
+
if (++i == rx_ring->count) i = 0;
next_rxd = E1000_RX_DESC(*rx_ring, i);
+ prefetch(next_rxd);
+
next_buffer = &rx_ring->buffer_info[i];
next_skb = next_buffer->skb;
+ prefetch(next_skb->data - NET_IP_ALIGN);
cleaned = TRUE;
cleaned_count++;
@@ -3733,10 +3637,6 @@
}
#endif /* CONFIG_E1000_NAPI */
netdev->last_rx = jiffies;
-#ifdef CONFIG_E1000_MQ
- rx_ring->rx_stats.packets++;
- rx_ring->rx_stats.bytes += length;
-#endif
next_desc:
rx_desc->status = 0;
@@ -3747,6 +3647,7 @@
cleaned_count = 0;
}
+ /* use prefetched values */
rx_desc = next_rxd;
buffer_info = next_buffer;
}
@@ -3789,9 +3690,9 @@
i = rx_ring->next_to_clean;
rx_desc = E1000_RX_DESC_PS(*rx_ring, i);
staterr = le32_to_cpu(rx_desc->wb.middle.status_error);
- buffer_info = &rx_ring->buffer_info[i];
while (staterr & E1000_RXD_STAT_DD) {
+ buffer_info = &rx_ring->buffer_info[i];
ps_page = &rx_ring->ps_page[i];
ps_page_dma = &rx_ring->ps_page_dma[i];
#ifdef CONFIG_E1000_NAPI
@@ -3801,10 +3702,16 @@
#endif
skb = buffer_info->skb;
+ /* in the packet split case this is header only */
+ prefetch(skb->data - NET_IP_ALIGN);
+
if (++i == rx_ring->count) i = 0;
next_rxd = E1000_RX_DESC_PS(*rx_ring, i);
+ prefetch(next_rxd);
+
next_buffer = &rx_ring->buffer_info[i];
next_skb = next_buffer->skb;
+ prefetch(next_skb->data - NET_IP_ALIGN);
cleaned = TRUE;
cleaned_count++;
@@ -3836,23 +3743,49 @@
/* Good Receive */
skb_put(skb, length);
- for (j = 0; j < adapter->rx_ps_pages; j++) {
- if (!(length = le16_to_cpu(rx_desc->wb.upper.length[j])))
- break;
+ {
+ /* this looks ugly, but it seems compiler issues make it
+ more efficient than reusing j */
+ int l1 = le16_to_cpu(rx_desc->wb.upper.length[0]);
+ /* page alloc/put takes too long and effects small packet
+ * throughput, so unsplit small packets and save the alloc/put*/
+ if (l1 && ((length + l1) < E1000_CB_LENGTH)) {
+ u8 *vaddr;
+ /* there is no documentation about how to call
+ * kmap_atomic, so we can't hold the mapping
+ * very long */
+ pci_dma_sync_single_for_cpu(pdev,
+ ps_page_dma->ps_page_dma[0],
+ PAGE_SIZE,
+ PCI_DMA_FROMDEVICE);
+ vaddr = kmap_atomic(ps_page->ps_page[0],
+ KM_SKB_DATA_SOFTIRQ);
+ memcpy(skb->tail, vaddr, l1);
+ kunmap_atomic(vaddr, KM_SKB_DATA_SOFTIRQ);
+ pci_dma_sync_single_for_device(pdev,
+ ps_page_dma->ps_page_dma[0],
+ PAGE_SIZE, PCI_DMA_FROMDEVICE);
+ skb_put(skb, l1);
+ length += l1;
+ goto copydone;
+ } /* if */
+ }
+
+ for (j = 0; j < adapter->rx_ps_pages; j++) {
+ if (!(length= le16_to_cpu(rx_desc->wb.upper.length[j])))
+ break;
pci_unmap_page(pdev, ps_page_dma->ps_page_dma[j],
PAGE_SIZE, PCI_DMA_FROMDEVICE);
ps_page_dma->ps_page_dma[j] = 0;
- skb_shinfo(skb)->frags[j].page =
- ps_page->ps_page[j];
+ skb_fill_page_desc(skb, j, ps_page->ps_page[j], 0,
+ length);
ps_page->ps_page[j] = NULL;
- skb_shinfo(skb)->frags[j].page_offset = 0;
- skb_shinfo(skb)->frags[j].size = length;
- skb_shinfo(skb)->nr_frags++;
skb->len += length;
skb->data_len += length;
}
+copydone:
e1000_rx_checksum(adapter, staterr,
rx_desc->wb.lower.hi_dword.csum_ip.csum, skb);
skb->protocol = eth_type_trans(skb, netdev);
@@ -3878,10 +3811,6 @@
}
#endif /* CONFIG_E1000_NAPI */
netdev->last_rx = jiffies;
-#ifdef CONFIG_E1000_MQ
- rx_ring->rx_stats.packets++;
- rx_ring->rx_stats.bytes += length;
-#endif
next_desc:
rx_desc->wb.middle.status_error &= ~0xFF;
@@ -3893,6 +3822,7 @@
cleaned_count = 0;
}
+ /* use prefetched values */
rx_desc = next_rxd;
buffer_info = next_buffer;
@@ -3936,7 +3866,6 @@
goto map_skb;
}
-
if (unlikely(!skb)) {
/* Better luck next round */
adapter->alloc_rx_buff_failed++;
@@ -4489,8 +4418,8 @@
}
#ifdef CONFIG_PM
-/* these functions save and restore 16 or 64 dwords (64-256 bytes) of config
- * space versus the 64 bytes that pci_[save|restore]_state handle
+/* Save/restore 16 or 64 dwords of PCI config space depending on which
+ * bus we're on (PCI(X) vs. PCI-E)
*/
#define PCIE_CONFIG_SPACE_LEN 256
#define PCI_CONFIG_SPACE_LEN 64
@@ -4500,6 +4429,7 @@
struct pci_dev *dev = adapter->pdev;
int size;
int i;
+
if (adapter->hw.mac_type >= e1000_82571)
size = PCIE_CONFIG_SPACE_LEN;
else
@@ -4523,8 +4453,10 @@
struct pci_dev *dev = adapter->pdev;
int size;
int i;
+
if (adapter->config_space == NULL)
return;
+
if (adapter->hw.mac_type >= e1000_82571)
size = PCIE_CONFIG_SPACE_LEN;
else
@@ -4552,8 +4484,8 @@
e1000_down(adapter);
#ifdef CONFIG_PM
- /* implement our own version of pci_save_state(pdev) because pci
- * express adapters have larger 256 byte config spaces */
+ /* Implement our own version of pci_save_state(pdev) because pci-
+ * express adapters have 256-byte config spaces. */
retval = e1000_pci_save_state(adapter);
if (retval)
return retval;
@@ -4610,7 +4542,7 @@
retval = pci_enable_wake(pdev, PCI_D3hot, 0);
if (retval)
DPRINTK(PROBE, ERR, "Error enabling D3 wake\n");
- retval = pci_enable_wake(pdev, PCI_D3cold, 0); /* 4 == D3 cold */
+ retval = pci_enable_wake(pdev, PCI_D3cold, 0);
if (retval)
DPRINTK(PROBE, ERR, "Error enabling D3 cold wake\n");
}
@@ -4626,7 +4558,8 @@
DPRINTK(PROBE, ERR, "Error enabling D3 wake\n");
retval = pci_enable_wake(pdev, PCI_D3cold, 1);
if (retval)
- DPRINTK(PROBE, ERR, "Error enabling D3 cold wake\n");
+ DPRINTK(PROBE, ERR,
+ "Error enabling D3 cold wake\n");
}
}
diff --git a/drivers/net/e1000/e1000_param.c b/drivers/net/e1000/e1000_param.c
index 3768d83..e0a4d37 100644
--- a/drivers/net/e1000/e1000_param.c
+++ b/drivers/net/e1000/e1000_param.c
@@ -268,7 +268,7 @@
BUG();
}
- DPRINTK(PROBE, INFO, "Invalid %s specified (%i) %s\n",
+ DPRINTK(PROBE, INFO, "Invalid %s value specified (%i) %s\n",
opt->name, *value, opt->err);
*value = opt->def;
return -1;
diff --git a/drivers/net/eepro100.c b/drivers/net/eepro100.c
index 8c62ced..467fc86 100644
--- a/drivers/net/eepro100.c
+++ b/drivers/net/eepro100.c
@@ -27,7 +27,7 @@
rx_align support: enables rx DMA without causing unaligned accesses.
*/
-static const char *version =
+static const char * const version =
"eepro100.c:v1.09j-t 9/29/99 Donald Becker http://www.scyld.com/network/eepro100.html\n"
"eepro100.c: $Revision: 1.36 $ 2000/11/17 Modified by Andrey V. Savochkin <saw@saw.sw.com.sg> and others\n";
@@ -469,7 +469,7 @@
0x31, 0x05, };
/* PHY media interface chips. */
-static const char *phys[] = {
+static const char * const phys[] = {
"None", "i82553-A/B", "i82553-C", "i82503",
"DP83840", "80c240", "80c24", "i82555",
"unknown-8", "unknown-9", "DP83840A", "unknown-11",
diff --git a/drivers/net/epic100.c b/drivers/net/epic100.c
index f119ec4..2f7b868 100644
--- a/drivers/net/epic100.c
+++ b/drivers/net/epic100.c
@@ -225,7 +225,7 @@
/* indexed by chip_t */
-static struct epic_chip_info pci_id_tbl[] = {
+static const struct epic_chip_info pci_id_tbl[] = {
{ "SMSC EPIC/100 83c170",
EPIC_IOTYPE, EPIC_TOTAL_SIZE, TYPE2_INTR | NO_MII | MII_PWRDWN },
{ "SMSC EPIC/100 83c170",
@@ -291,7 +291,7 @@
RxDone | RxStarted | RxEarlyWarn | RxOverflow | RxFull)
#define EpicNormalEvent (0x0000ffff & ~EpicNapiEvent)
-static u16 media2miictl[16] = {
+static const u16 media2miictl[16] = {
0, 0x0C00, 0x0C00, 0x2000, 0x0100, 0x2100, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0 };
diff --git a/drivers/net/eth16i.c b/drivers/net/eth16i.c
index f32a6b3..b67545b 100644
--- a/drivers/net/eth16i.c
+++ b/drivers/net/eth16i.c
@@ -161,6 +161,7 @@
#include <linux/etherdevice.h>
#include <linux/skbuff.h>
#include <linux/bitops.h>
+#include <linux/jiffies.h>
#include <asm/system.h>
#include <asm/io.h>
@@ -754,7 +755,7 @@
static int eth16i_send_probe_packet(int ioaddr, unsigned char *b, int l)
{
- int starttime;
+ unsigned long starttime;
outb(0xff, ioaddr + TX_STATUS_REG);
@@ -765,7 +766,7 @@
outb(TX_START | 1, ioaddr + TRANSMIT_START_REG);
while( (inb(ioaddr + TX_STATUS_REG) & 0x80) == 0) {
- if( (jiffies - starttime) > TX_TIMEOUT) {
+ if( time_after(jiffies, starttime + TX_TIMEOUT)) {
return -1;
}
}
@@ -775,18 +776,18 @@
static int eth16i_receive_probe_packet(int ioaddr)
{
- int starttime;
+ unsigned long starttime;
starttime = jiffies;
while((inb(ioaddr + TX_STATUS_REG) & 0x20) == 0) {
- if( (jiffies - starttime) > TX_TIMEOUT) {
+ if( time_after(jiffies, starttime + TX_TIMEOUT)) {
if(eth16i_debug > 1)
printk(KERN_DEBUG "Timeout occurred waiting transmit packet received\n");
starttime = jiffies;
while((inb(ioaddr + RX_STATUS_REG) & 0x80) == 0) {
- if( (jiffies - starttime) > TX_TIMEOUT) {
+ if( time_after(jiffies, starttime + TX_TIMEOUT)) {
if(eth16i_debug > 1)
printk(KERN_DEBUG "Timeout occurred waiting receive packet\n");
return -1;
diff --git a/drivers/net/fealnx.c b/drivers/net/fealnx.c
index 55dbe9a..a844926 100644
--- a/drivers/net/fealnx.c
+++ b/drivers/net/fealnx.c
@@ -160,7 +160,7 @@
int flags;
};
-static struct chip_info skel_netdrv_tbl[] = {
+static const struct chip_info skel_netdrv_tbl[] = {
{"100/10M Ethernet PCI Adapter", 136, HAS_MII_XCVR},
{"100/10M Ethernet PCI Adapter", 136, HAS_CHIP_XCVR},
{"1000/100/10M Ethernet PCI Adapter", 136, HAS_MII_XCVR},
diff --git a/drivers/net/forcedeth.c b/drivers/net/forcedeth.c
index 3682ec6..e7fc28b 100644
--- a/drivers/net/forcedeth.c
+++ b/drivers/net/forcedeth.c
@@ -102,6 +102,9 @@
* 0.47: 26 Oct 2005: Add phyaddr 0 in phy scan.
* 0.48: 24 Dec 2005: Disable TSO, bugfix for pci_map_single
* 0.49: 10 Dec 2005: Fix tso for large buffers.
+ * 0.50: 20 Jan 2006: Add 8021pq tagging support.
+ * 0.51: 20 Jan 2006: Add 64bit consistent memory allocation for rings.
+ * 0.52: 20 Jan 2006: Add MSI/MSIX support.
*
* Known bugs:
* We suspect that on some hardware no TX done interrupts are generated.
@@ -113,7 +116,7 @@
* DEV_NEED_TIMERIRQ will not harm you on sane hardware, only generating a few
* superfluous timer interrupts from the nic.
*/
-#define FORCEDETH_VERSION "0.49"
+#define FORCEDETH_VERSION "0.52"
#define DRV_NAME "forcedeth"
#include <linux/module.h>
@@ -153,6 +156,9 @@
#define DEV_HAS_LARGEDESC 0x0004 /* device supports jumbo frames and needs packet format 2 */
#define DEV_HAS_HIGH_DMA 0x0008 /* device supports 64bit dma */
#define DEV_HAS_CHECKSUM 0x0010 /* device supports tx and rx checksum offloads */
+#define DEV_HAS_VLAN 0x0020 /* device supports vlan tagging and striping */
+#define DEV_HAS_MSI 0x0040 /* device supports MSI */
+#define DEV_HAS_MSI_X 0x0080 /* device supports MSI-X */
enum {
NvRegIrqStatus = 0x000,
@@ -166,14 +172,17 @@
#define NVREG_IRQ_TX_OK 0x0010
#define NVREG_IRQ_TIMER 0x0020
#define NVREG_IRQ_LINK 0x0040
-#define NVREG_IRQ_TX_ERROR 0x0080
-#define NVREG_IRQ_TX1 0x0100
+#define NVREG_IRQ_RX_FORCED 0x0080
+#define NVREG_IRQ_TX_FORCED 0x0100
#define NVREG_IRQMASK_THROUGHPUT 0x00df
#define NVREG_IRQMASK_CPU 0x0040
+#define NVREG_IRQ_TX_ALL (NVREG_IRQ_TX_ERR|NVREG_IRQ_TX_OK|NVREG_IRQ_TX_FORCED)
+#define NVREG_IRQ_RX_ALL (NVREG_IRQ_RX_ERROR|NVREG_IRQ_RX|NVREG_IRQ_RX_NOBUF|NVREG_IRQ_RX_FORCED)
+#define NVREG_IRQ_OTHER (NVREG_IRQ_TIMER|NVREG_IRQ_LINK)
#define NVREG_IRQ_UNKNOWN (~(NVREG_IRQ_RX_ERROR|NVREG_IRQ_RX|NVREG_IRQ_RX_NOBUF|NVREG_IRQ_TX_ERR| \
- NVREG_IRQ_TX_OK|NVREG_IRQ_TIMER|NVREG_IRQ_LINK|NVREG_IRQ_TX_ERROR| \
- NVREG_IRQ_TX1))
+ NVREG_IRQ_TX_OK|NVREG_IRQ_TIMER|NVREG_IRQ_LINK|NVREG_IRQ_RX_FORCED| \
+ NVREG_IRQ_TX_FORCED))
NvRegUnknownSetupReg6 = 0x008,
#define NVREG_UNKSETUP6_VAL 3
@@ -185,6 +194,10 @@
NvRegPollingInterval = 0x00c,
#define NVREG_POLL_DEFAULT_THROUGHPUT 970
#define NVREG_POLL_DEFAULT_CPU 13
+ NvRegMSIMap0 = 0x020,
+ NvRegMSIMap1 = 0x024,
+ NvRegMSIIrqMask = 0x030,
+#define NVREG_MSI_VECTOR_0_ENABLED 0x01
NvRegMisc1 = 0x080,
#define NVREG_MISC1_HD 0x02
#define NVREG_MISC1_FORCE 0x3b0f3c
@@ -254,6 +267,10 @@
#define NVREG_TXRXCTL_DESC_1 0
#define NVREG_TXRXCTL_DESC_2 0x02100
#define NVREG_TXRXCTL_DESC_3 0x02200
+#define NVREG_TXRXCTL_VLANSTRIP 0x00040
+#define NVREG_TXRXCTL_VLANINS 0x00080
+ NvRegTxRingPhysAddrHigh = 0x148,
+ NvRegRxRingPhysAddrHigh = 0x14C,
NvRegMIIStatus = 0x180,
#define NVREG_MIISTAT_ERROR 0x0001
#define NVREG_MIISTAT_LINKCHANGE 0x0008
@@ -303,6 +320,11 @@
#define NVREG_POWERSTATE_D1 0x0001
#define NVREG_POWERSTATE_D2 0x0002
#define NVREG_POWERSTATE_D3 0x0003
+ NvRegVlanControl = 0x300,
+#define NVREG_VLANCONTROL_ENABLE 0x2000
+ NvRegMSIXMap0 = 0x3e0,
+ NvRegMSIXMap1 = 0x3e4,
+ NvRegMSIXIrqStatus = 0x3f0,
};
/* Big endian: should work, but is untested */
@@ -314,7 +336,7 @@
struct ring_desc_ex {
u32 PacketBufferHigh;
u32 PacketBufferLow;
- u32 Reserved;
+ u32 TxVlan;
u32 FlagLen;
};
@@ -355,6 +377,8 @@
#define NV_TX2_CHECKSUM_L3 (1<<27)
#define NV_TX2_CHECKSUM_L4 (1<<26)
+#define NV_TX3_VLAN_TAG_PRESENT (1<<18)
+
#define NV_RX_DESCRIPTORVALID (1<<16)
#define NV_RX_MISSEDFRAME (1<<17)
#define NV_RX_SUBSTRACT1 (1<<18)
@@ -385,6 +409,9 @@
#define NV_RX2_ERROR (1<<30)
#define NV_RX2_AVAIL (1<<31)
+#define NV_RX3_VLAN_TAG_PRESENT (1<<16)
+#define NV_RX3_VLAN_TAG_MASK (0x0000FFFF)
+
/* Miscelaneous hardware related defines: */
#define NV_PCI_REGSZ 0x270
@@ -475,6 +502,18 @@
#define LPA_1000FULL 0x0800
#define LPA_1000HALF 0x0400
+/* MSI/MSI-X defines */
+#define NV_MSI_X_MAX_VECTORS 8
+#define NV_MSI_X_VECTORS_MASK 0x000f
+#define NV_MSI_CAPABLE 0x0010
+#define NV_MSI_X_CAPABLE 0x0020
+#define NV_MSI_ENABLED 0x0040
+#define NV_MSI_X_ENABLED 0x0080
+
+#define NV_MSI_X_VECTOR_ALL 0x0
+#define NV_MSI_X_VECTOR_RX 0x0
+#define NV_MSI_X_VECTOR_TX 0x1
+#define NV_MSI_X_VECTOR_OTHER 0x2
/*
* SMP locking:
@@ -511,6 +550,7 @@
u32 irqmask;
u32 desc_ver;
u32 txrxctl_bits;
+ u32 vlanctl_bits;
void __iomem *base;
@@ -525,6 +565,7 @@
unsigned int pkt_limit;
struct timer_list oom_kick;
struct timer_list nic_poll;
+ u32 nic_poll_irq;
/* media detection workaround.
* Locking: Within irq hander or disable_irq+spin_lock(&np->lock);
@@ -540,6 +581,13 @@
dma_addr_t tx_dma[TX_RING];
unsigned int tx_dma_len[TX_RING];
u32 tx_flags;
+
+ /* vlan fields */
+ struct vlan_group *vlangrp;
+
+ /* msi/msi-x fields */
+ u32 msi_flags;
+ struct msix_entry msi_x_entry[NV_MSI_X_MAX_VECTORS];
};
/*
@@ -567,6 +615,16 @@
*/
static int poll_interval = -1;
+/*
+ * Disable MSI interrupts
+ */
+static int disable_msi = 0;
+
+/*
+ * Disable MSIX interrupts
+ */
+static int disable_msix = 0;
+
static inline struct fe_priv *get_nvpriv(struct net_device *dev)
{
return netdev_priv(dev);
@@ -612,6 +670,33 @@
return 0;
}
+#define NV_SETUP_RX_RING 0x01
+#define NV_SETUP_TX_RING 0x02
+
+static void setup_hw_rings(struct net_device *dev, int rxtx_flags)
+{
+ struct fe_priv *np = get_nvpriv(dev);
+ u8 __iomem *base = get_hwbase(dev);
+
+ if (np->desc_ver == DESC_VER_1 || np->desc_ver == DESC_VER_2) {
+ if (rxtx_flags & NV_SETUP_RX_RING) {
+ writel((u32) cpu_to_le64(np->ring_addr), base + NvRegRxRingPhysAddr);
+ }
+ if (rxtx_flags & NV_SETUP_TX_RING) {
+ writel((u32) cpu_to_le64(np->ring_addr + RX_RING*sizeof(struct ring_desc)), base + NvRegTxRingPhysAddr);
+ }
+ } else {
+ if (rxtx_flags & NV_SETUP_RX_RING) {
+ writel((u32) cpu_to_le64(np->ring_addr), base + NvRegRxRingPhysAddr);
+ writel((u32) (cpu_to_le64(np->ring_addr) >> 32), base + NvRegRxRingPhysAddrHigh);
+ }
+ if (rxtx_flags & NV_SETUP_TX_RING) {
+ writel((u32) cpu_to_le64(np->ring_addr + RX_RING*sizeof(struct ring_desc_ex)), base + NvRegTxRingPhysAddr);
+ writel((u32) (cpu_to_le64(np->ring_addr + RX_RING*sizeof(struct ring_desc_ex)) >> 32), base + NvRegTxRingPhysAddrHigh);
+ }
+ }
+}
+
#define MII_READ (-1)
/* mii_rw: read/write a register on the PHY.
*
@@ -903,14 +988,27 @@
struct net_device *dev = (struct net_device *) data;
struct fe_priv *np = netdev_priv(dev);
- disable_irq(dev->irq);
+
+ if (!(np->msi_flags & NV_MSI_X_ENABLED) ||
+ ((np->msi_flags & NV_MSI_X_ENABLED) &&
+ ((np->msi_flags & NV_MSI_X_VECTORS_MASK) == 0x1))) {
+ disable_irq(dev->irq);
+ } else {
+ disable_irq(np->msi_x_entry[NV_MSI_X_VECTOR_RX].vector);
+ }
if (nv_alloc_rx(dev)) {
spin_lock(&np->lock);
if (!np->in_shutdown)
mod_timer(&np->oom_kick, jiffies + OOM_REFILL);
spin_unlock(&np->lock);
}
- enable_irq(dev->irq);
+ if (!(np->msi_flags & NV_MSI_X_ENABLED) ||
+ ((np->msi_flags & NV_MSI_X_ENABLED) &&
+ ((np->msi_flags & NV_MSI_X_VECTORS_MASK) == 0x1))) {
+ enable_irq(dev->irq);
+ } else {
+ enable_irq(np->msi_x_entry[NV_MSI_X_VECTOR_RX].vector);
+ }
}
static void nv_init_rx(struct net_device *dev)
@@ -965,7 +1063,7 @@
}
if (np->tx_skbuff[skbnr]) {
- dev_kfree_skb_irq(np->tx_skbuff[skbnr]);
+ dev_kfree_skb_any(np->tx_skbuff[skbnr]);
np->tx_skbuff[skbnr] = NULL;
return 1;
} else {
@@ -1031,6 +1129,7 @@
u32 bcnt;
u32 size = skb->len-skb->data_len;
u32 entries = (size >> NV_TX2_TSO_MAX_SHIFT) + ((size & (NV_TX2_TSO_MAX_SIZE-1)) ? 1 : 0);
+ u32 tx_flags_vlan = 0;
/* add fragments to entries count */
for (i = 0; i < fragments; i++) {
@@ -1111,10 +1210,16 @@
#endif
tx_flags_extra = (skb->ip_summed == CHECKSUM_HW ? (NV_TX2_CHECKSUM_L3|NV_TX2_CHECKSUM_L4) : 0);
+ /* vlan tag */
+ if (np->vlangrp && vlan_tx_tag_present(skb)) {
+ tx_flags_vlan = NV_TX3_VLAN_TAG_PRESENT | vlan_tx_tag_get(skb);
+ }
+
/* set tx flags */
if (np->desc_ver == DESC_VER_1 || np->desc_ver == DESC_VER_2) {
np->tx_ring.orig[start_nr].FlagLen |= cpu_to_le32(tx_flags | tx_flags_extra);
} else {
+ np->tx_ring.ex[start_nr].TxVlan = cpu_to_le32(tx_flags_vlan);
np->tx_ring.ex[start_nr].FlagLen |= cpu_to_le32(tx_flags | tx_flags_extra);
}
@@ -1209,9 +1314,14 @@
{
struct fe_priv *np = netdev_priv(dev);
u8 __iomem *base = get_hwbase(dev);
+ u32 status;
- printk(KERN_INFO "%s: Got tx_timeout. irq: %08x\n", dev->name,
- readl(base + NvRegIrqStatus) & NVREG_IRQSTAT_MASK);
+ if (np->msi_flags & NV_MSI_X_ENABLED)
+ status = readl(base + NvRegMSIXIrqStatus) & NVREG_IRQSTAT_MASK;
+ else
+ status = readl(base + NvRegIrqStatus) & NVREG_IRQSTAT_MASK;
+
+ printk(KERN_INFO "%s: Got tx_timeout. irq: %08x\n", dev->name, status);
{
int i;
@@ -1273,10 +1383,7 @@
printk(KERN_DEBUG "%s: tx_timeout: dead entries!\n", dev->name);
nv_drain_tx(dev);
np->next_tx = np->nic_tx = 0;
- if (np->desc_ver == DESC_VER_1 || np->desc_ver == DESC_VER_2)
- writel((u32) (np->ring_addr + RX_RING*sizeof(struct ring_desc)), base + NvRegTxRingPhysAddr);
- else
- writel((u32) (np->ring_addr + RX_RING*sizeof(struct ring_desc_ex)), base + NvRegTxRingPhysAddr);
+ setup_hw_rings(dev, NV_SETUP_TX_RING);
netif_wake_queue(dev);
}
@@ -1342,6 +1449,8 @@
{
struct fe_priv *np = netdev_priv(dev);
u32 Flags;
+ u32 vlanflags = 0;
+
for (;;) {
struct sk_buff *skb;
@@ -1357,6 +1466,7 @@
} else {
Flags = le32_to_cpu(np->rx_ring.ex[i].FlagLen);
len = nv_descr_getlength_ex(&np->rx_ring.ex[i], np->desc_ver);
+ vlanflags = le32_to_cpu(np->rx_ring.ex[i].PacketBufferLow);
}
dprintk(KERN_DEBUG "%s: nv_rx_process: looking at packet %d, Flags 0x%x.\n",
@@ -1474,7 +1584,11 @@
skb->protocol = eth_type_trans(skb, dev);
dprintk(KERN_DEBUG "%s: nv_rx_process: packet %d with %d bytes, proto %d accepted.\n",
dev->name, np->cur_rx, len, skb->protocol);
- netif_rx(skb);
+ if (np->vlangrp && (vlanflags & NV_RX3_VLAN_TAG_PRESENT)) {
+ vlan_hwaccel_rx(skb, np->vlangrp, vlanflags & NV_RX3_VLAN_TAG_MASK);
+ } else {
+ netif_rx(skb);
+ }
dev->last_rx = jiffies;
np->stats.rx_packets++;
np->stats.rx_bytes += len;
@@ -1523,7 +1637,15 @@
* guessed, there is probably a simpler approach.
* Changing the MTU is a rare event, it shouldn't matter.
*/
- disable_irq(dev->irq);
+ if (!(np->msi_flags & NV_MSI_X_ENABLED) ||
+ ((np->msi_flags & NV_MSI_X_ENABLED) &&
+ ((np->msi_flags & NV_MSI_X_VECTORS_MASK) == 0x1))) {
+ disable_irq(dev->irq);
+ } else {
+ disable_irq(np->msi_x_entry[NV_MSI_X_VECTOR_RX].vector);
+ disable_irq(np->msi_x_entry[NV_MSI_X_VECTOR_TX].vector);
+ disable_irq(np->msi_x_entry[NV_MSI_X_VECTOR_OTHER].vector);
+ }
spin_lock_bh(&dev->xmit_lock);
spin_lock(&np->lock);
/* stop engines */
@@ -1544,11 +1666,7 @@
}
/* reinit nic view of the rx queue */
writel(np->rx_buf_sz, base + NvRegOffloadConfig);
- writel((u32) np->ring_addr, base + NvRegRxRingPhysAddr);
- if (np->desc_ver == DESC_VER_1 || np->desc_ver == DESC_VER_2)
- writel((u32) (np->ring_addr + RX_RING*sizeof(struct ring_desc)), base + NvRegTxRingPhysAddr);
- else
- writel((u32) (np->ring_addr + RX_RING*sizeof(struct ring_desc_ex)), base + NvRegTxRingPhysAddr);
+ setup_hw_rings(dev, NV_SETUP_RX_RING | NV_SETUP_TX_RING);
writel( ((RX_RING-1) << NVREG_RINGSZ_RXSHIFT) + ((TX_RING-1) << NVREG_RINGSZ_TXSHIFT),
base + NvRegRingSizes);
pci_push(base);
@@ -1560,7 +1678,15 @@
nv_start_tx(dev);
spin_unlock(&np->lock);
spin_unlock_bh(&dev->xmit_lock);
- enable_irq(dev->irq);
+ if (!(np->msi_flags & NV_MSI_X_ENABLED) ||
+ ((np->msi_flags & NV_MSI_X_ENABLED) &&
+ ((np->msi_flags & NV_MSI_X_VECTORS_MASK) == 0x1))) {
+ enable_irq(dev->irq);
+ } else {
+ enable_irq(np->msi_x_entry[NV_MSI_X_VECTOR_RX].vector);
+ enable_irq(np->msi_x_entry[NV_MSI_X_VECTOR_TX].vector);
+ enable_irq(np->msi_x_entry[NV_MSI_X_VECTOR_OTHER].vector);
+ }
}
return 0;
}
@@ -1866,8 +1992,13 @@
dprintk(KERN_DEBUG "%s: nv_nic_irq\n", dev->name);
for (i=0; ; i++) {
- events = readl(base + NvRegIrqStatus) & NVREG_IRQSTAT_MASK;
- writel(NVREG_IRQSTAT_MASK, base + NvRegIrqStatus);
+ if (!(np->msi_flags & NV_MSI_X_ENABLED)) {
+ events = readl(base + NvRegIrqStatus) & NVREG_IRQSTAT_MASK;
+ writel(NVREG_IRQSTAT_MASK, base + NvRegIrqStatus);
+ } else {
+ events = readl(base + NvRegMSIXIrqStatus) & NVREG_IRQSTAT_MASK;
+ writel(NVREG_IRQSTAT_MASK, base + NvRegMSIXIrqStatus);
+ }
pci_push(base);
dprintk(KERN_DEBUG "%s: irq: %08x\n", dev->name, events);
if (!(events & np->irqmask))
@@ -1907,11 +2038,16 @@
if (i > max_interrupt_work) {
spin_lock(&np->lock);
/* disable interrupts on the nic */
- writel(0, base + NvRegIrqMask);
+ if (!(np->msi_flags & NV_MSI_X_ENABLED))
+ writel(0, base + NvRegIrqMask);
+ else
+ writel(np->irqmask, base + NvRegIrqMask);
pci_push(base);
- if (!np->in_shutdown)
+ if (!np->in_shutdown) {
+ np->nic_poll_irq = np->irqmask;
mod_timer(&np->nic_poll, jiffies + POLL_WAIT);
+ }
printk(KERN_DEBUG "%s: too many iterations (%d) in nv_nic_irq.\n", dev->name, i);
spin_unlock(&np->lock);
break;
@@ -1923,22 +2059,212 @@
return IRQ_RETVAL(i);
}
+static irqreturn_t nv_nic_irq_tx(int foo, void *data, struct pt_regs *regs)
+{
+ struct net_device *dev = (struct net_device *) data;
+ struct fe_priv *np = netdev_priv(dev);
+ u8 __iomem *base = get_hwbase(dev);
+ u32 events;
+ int i;
+
+ dprintk(KERN_DEBUG "%s: nv_nic_irq_tx\n", dev->name);
+
+ for (i=0; ; i++) {
+ events = readl(base + NvRegMSIXIrqStatus) & NVREG_IRQ_TX_ALL;
+ writel(NVREG_IRQ_TX_ALL, base + NvRegMSIXIrqStatus);
+ pci_push(base);
+ dprintk(KERN_DEBUG "%s: tx irq: %08x\n", dev->name, events);
+ if (!(events & np->irqmask))
+ break;
+
+ spin_lock(&np->lock);
+ nv_tx_done(dev);
+ spin_unlock(&np->lock);
+
+ if (events & (NVREG_IRQ_TX_ERR)) {
+ dprintk(KERN_DEBUG "%s: received irq with events 0x%x. Probably TX fail.\n",
+ dev->name, events);
+ }
+ if (i > max_interrupt_work) {
+ spin_lock(&np->lock);
+ /* disable interrupts on the nic */
+ writel(NVREG_IRQ_TX_ALL, base + NvRegIrqMask);
+ pci_push(base);
+
+ if (!np->in_shutdown) {
+ np->nic_poll_irq |= NVREG_IRQ_TX_ALL;
+ mod_timer(&np->nic_poll, jiffies + POLL_WAIT);
+ }
+ printk(KERN_DEBUG "%s: too many iterations (%d) in nv_nic_irq_tx.\n", dev->name, i);
+ spin_unlock(&np->lock);
+ break;
+ }
+
+ }
+ dprintk(KERN_DEBUG "%s: nv_nic_irq_tx completed\n", dev->name);
+
+ return IRQ_RETVAL(i);
+}
+
+static irqreturn_t nv_nic_irq_rx(int foo, void *data, struct pt_regs *regs)
+{
+ struct net_device *dev = (struct net_device *) data;
+ struct fe_priv *np = netdev_priv(dev);
+ u8 __iomem *base = get_hwbase(dev);
+ u32 events;
+ int i;
+
+ dprintk(KERN_DEBUG "%s: nv_nic_irq_rx\n", dev->name);
+
+ for (i=0; ; i++) {
+ events = readl(base + NvRegMSIXIrqStatus) & NVREG_IRQ_RX_ALL;
+ writel(NVREG_IRQ_RX_ALL, base + NvRegMSIXIrqStatus);
+ pci_push(base);
+ dprintk(KERN_DEBUG "%s: rx irq: %08x\n", dev->name, events);
+ if (!(events & np->irqmask))
+ break;
+
+ nv_rx_process(dev);
+ if (nv_alloc_rx(dev)) {
+ spin_lock(&np->lock);
+ if (!np->in_shutdown)
+ mod_timer(&np->oom_kick, jiffies + OOM_REFILL);
+ spin_unlock(&np->lock);
+ }
+
+ if (i > max_interrupt_work) {
+ spin_lock(&np->lock);
+ /* disable interrupts on the nic */
+ writel(NVREG_IRQ_RX_ALL, base + NvRegIrqMask);
+ pci_push(base);
+
+ if (!np->in_shutdown) {
+ np->nic_poll_irq |= NVREG_IRQ_RX_ALL;
+ mod_timer(&np->nic_poll, jiffies + POLL_WAIT);
+ }
+ printk(KERN_DEBUG "%s: too many iterations (%d) in nv_nic_irq_rx.\n", dev->name, i);
+ spin_unlock(&np->lock);
+ break;
+ }
+
+ }
+ dprintk(KERN_DEBUG "%s: nv_nic_irq_rx completed\n", dev->name);
+
+ return IRQ_RETVAL(i);
+}
+
+static irqreturn_t nv_nic_irq_other(int foo, void *data, struct pt_regs *regs)
+{
+ struct net_device *dev = (struct net_device *) data;
+ struct fe_priv *np = netdev_priv(dev);
+ u8 __iomem *base = get_hwbase(dev);
+ u32 events;
+ int i;
+
+ dprintk(KERN_DEBUG "%s: nv_nic_irq_other\n", dev->name);
+
+ for (i=0; ; i++) {
+ events = readl(base + NvRegMSIXIrqStatus) & NVREG_IRQ_OTHER;
+ writel(NVREG_IRQ_OTHER, base + NvRegMSIXIrqStatus);
+ pci_push(base);
+ dprintk(KERN_DEBUG "%s: irq: %08x\n", dev->name, events);
+ if (!(events & np->irqmask))
+ break;
+
+ if (events & NVREG_IRQ_LINK) {
+ spin_lock(&np->lock);
+ nv_link_irq(dev);
+ spin_unlock(&np->lock);
+ }
+ if (np->need_linktimer && time_after(jiffies, np->link_timeout)) {
+ spin_lock(&np->lock);
+ nv_linkchange(dev);
+ spin_unlock(&np->lock);
+ np->link_timeout = jiffies + LINK_TIMEOUT;
+ }
+ if (events & (NVREG_IRQ_UNKNOWN)) {
+ printk(KERN_DEBUG "%s: received irq with unknown events 0x%x. Please report\n",
+ dev->name, events);
+ }
+ if (i > max_interrupt_work) {
+ spin_lock(&np->lock);
+ /* disable interrupts on the nic */
+ writel(NVREG_IRQ_OTHER, base + NvRegIrqMask);
+ pci_push(base);
+
+ if (!np->in_shutdown) {
+ np->nic_poll_irq |= NVREG_IRQ_OTHER;
+ mod_timer(&np->nic_poll, jiffies + POLL_WAIT);
+ }
+ printk(KERN_DEBUG "%s: too many iterations (%d) in nv_nic_irq_other.\n", dev->name, i);
+ spin_unlock(&np->lock);
+ break;
+ }
+
+ }
+ dprintk(KERN_DEBUG "%s: nv_nic_irq_other completed\n", dev->name);
+
+ return IRQ_RETVAL(i);
+}
+
static void nv_do_nic_poll(unsigned long data)
{
struct net_device *dev = (struct net_device *) data;
struct fe_priv *np = netdev_priv(dev);
u8 __iomem *base = get_hwbase(dev);
+ u32 mask = 0;
- disable_irq(dev->irq);
- /* FIXME: Do we need synchronize_irq(dev->irq) here? */
/*
+ * First disable irq(s) and then
* reenable interrupts on the nic, we have to do this before calling
* nv_nic_irq because that may decide to do otherwise
*/
- writel(np->irqmask, base + NvRegIrqMask);
+
+ if (!(np->msi_flags & NV_MSI_X_ENABLED) ||
+ ((np->msi_flags & NV_MSI_X_ENABLED) &&
+ ((np->msi_flags & NV_MSI_X_VECTORS_MASK) == 0x1))) {
+ disable_irq(dev->irq);
+ mask = np->irqmask;
+ } else {
+ if (np->nic_poll_irq & NVREG_IRQ_RX_ALL) {
+ disable_irq(np->msi_x_entry[NV_MSI_X_VECTOR_RX].vector);
+ mask |= NVREG_IRQ_RX_ALL;
+ }
+ if (np->nic_poll_irq & NVREG_IRQ_TX_ALL) {
+ disable_irq(np->msi_x_entry[NV_MSI_X_VECTOR_TX].vector);
+ mask |= NVREG_IRQ_TX_ALL;
+ }
+ if (np->nic_poll_irq & NVREG_IRQ_OTHER) {
+ disable_irq(np->msi_x_entry[NV_MSI_X_VECTOR_OTHER].vector);
+ mask |= NVREG_IRQ_OTHER;
+ }
+ }
+ np->nic_poll_irq = 0;
+
+ /* FIXME: Do we need synchronize_irq(dev->irq) here? */
+
+ writel(mask, base + NvRegIrqMask);
pci_push(base);
- nv_nic_irq((int) 0, (void *) data, (struct pt_regs *) NULL);
- enable_irq(dev->irq);
+
+ if (!(np->msi_flags & NV_MSI_X_ENABLED) ||
+ ((np->msi_flags & NV_MSI_X_ENABLED) &&
+ ((np->msi_flags & NV_MSI_X_VECTORS_MASK) == 0x1))) {
+ nv_nic_irq((int) 0, (void *) data, (struct pt_regs *) NULL);
+ enable_irq(dev->irq);
+ } else {
+ if (np->nic_poll_irq & NVREG_IRQ_RX_ALL) {
+ nv_nic_irq_rx((int) 0, (void *) data, (struct pt_regs *) NULL);
+ enable_irq(np->msi_x_entry[NV_MSI_X_VECTOR_RX].vector);
+ }
+ if (np->nic_poll_irq & NVREG_IRQ_TX_ALL) {
+ nv_nic_irq_tx((int) 0, (void *) data, (struct pt_regs *) NULL);
+ enable_irq(np->msi_x_entry[NV_MSI_X_VECTOR_TX].vector);
+ }
+ if (np->nic_poll_irq & NVREG_IRQ_OTHER) {
+ nv_nic_irq_other((int) 0, (void *) data, (struct pt_regs *) NULL);
+ enable_irq(np->msi_x_entry[NV_MSI_X_VECTOR_OTHER].vector);
+ }
+ }
}
#ifdef CONFIG_NET_POLL_CONTROLLER
@@ -2217,11 +2543,66 @@
.get_perm_addr = ethtool_op_get_perm_addr,
};
+static void nv_vlan_rx_register(struct net_device *dev, struct vlan_group *grp)
+{
+ struct fe_priv *np = get_nvpriv(dev);
+
+ spin_lock_irq(&np->lock);
+
+ /* save vlan group */
+ np->vlangrp = grp;
+
+ if (grp) {
+ /* enable vlan on MAC */
+ np->txrxctl_bits |= NVREG_TXRXCTL_VLANSTRIP | NVREG_TXRXCTL_VLANINS;
+ } else {
+ /* disable vlan on MAC */
+ np->txrxctl_bits &= ~NVREG_TXRXCTL_VLANSTRIP;
+ np->txrxctl_bits &= ~NVREG_TXRXCTL_VLANINS;
+ }
+
+ writel(np->txrxctl_bits, get_hwbase(dev) + NvRegTxRxControl);
+
+ spin_unlock_irq(&np->lock);
+};
+
+static void nv_vlan_rx_kill_vid(struct net_device *dev, unsigned short vid)
+{
+ /* nothing to do */
+};
+
+static void set_msix_vector_map(struct net_device *dev, u32 vector, u32 irqmask)
+{
+ u8 __iomem *base = get_hwbase(dev);
+ int i;
+ u32 msixmap = 0;
+
+ /* Each interrupt bit can be mapped to a MSIX vector (4 bits).
+ * MSIXMap0 represents the first 8 interrupts and MSIXMap1 represents
+ * the remaining 8 interrupts.
+ */
+ for (i = 0; i < 8; i++) {
+ if ((irqmask >> i) & 0x1) {
+ msixmap |= vector << (i << 2);
+ }
+ }
+ writel(readl(base + NvRegMSIXMap0) | msixmap, base + NvRegMSIXMap0);
+
+ msixmap = 0;
+ for (i = 0; i < 8; i++) {
+ if ((irqmask >> (i + 8)) & 0x1) {
+ msixmap |= vector << (i << 2);
+ }
+ }
+ writel(readl(base + NvRegMSIXMap1) | msixmap, base + NvRegMSIXMap1);
+}
+
static int nv_open(struct net_device *dev)
{
struct fe_priv *np = netdev_priv(dev);
u8 __iomem *base = get_hwbase(dev);
- int ret, oom, i;
+ int ret = 1;
+ int oom, i;
dprintk(KERN_DEBUG "nv_open: begin\n");
@@ -2253,11 +2634,7 @@
nv_copy_mac_to_hw(dev);
/* 4) give hw rings */
- writel((u32) np->ring_addr, base + NvRegRxRingPhysAddr);
- if (np->desc_ver == DESC_VER_1 || np->desc_ver == DESC_VER_2)
- writel((u32) (np->ring_addr + RX_RING*sizeof(struct ring_desc)), base + NvRegTxRingPhysAddr);
- else
- writel((u32) (np->ring_addr + RX_RING*sizeof(struct ring_desc_ex)), base + NvRegTxRingPhysAddr);
+ setup_hw_rings(dev, NV_SETUP_RX_RING | NV_SETUP_TX_RING);
writel( ((RX_RING-1) << NVREG_RINGSZ_RXSHIFT) + ((TX_RING-1) << NVREG_RINGSZ_TXSHIFT),
base + NvRegRingSizes);
@@ -2265,6 +2642,7 @@
writel(np->linkspeed, base + NvRegLinkSpeed);
writel(NVREG_UNKSETUP3_VAL1, base + NvRegUnknownSetupReg3);
writel(np->txrxctl_bits, base + NvRegTxRxControl);
+ writel(np->vlanctl_bits, base + NvRegVlanControl);
pci_push(base);
writel(NVREG_TXRXCTL_BIT1|np->txrxctl_bits, base + NvRegTxRxControl);
reg_delay(dev, NvRegUnknownSetupReg5, NVREG_UNKSETUP5_BIT31, NVREG_UNKSETUP5_BIT31,
@@ -2315,9 +2693,77 @@
writel(NVREG_IRQSTAT_MASK, base + NvRegIrqStatus);
pci_push(base);
- ret = request_irq(dev->irq, &nv_nic_irq, SA_SHIRQ, dev->name, dev);
- if (ret)
- goto out_drain;
+ if (np->msi_flags & NV_MSI_X_CAPABLE) {
+ for (i = 0; i < (np->msi_flags & NV_MSI_X_VECTORS_MASK); i++) {
+ np->msi_x_entry[i].entry = i;
+ }
+ if ((ret = pci_enable_msix(np->pci_dev, np->msi_x_entry, (np->msi_flags & NV_MSI_X_VECTORS_MASK))) == 0) {
+ np->msi_flags |= NV_MSI_X_ENABLED;
+ if (optimization_mode == NV_OPTIMIZATION_MODE_THROUGHPUT) {
+ /* Request irq for rx handling */
+ if (request_irq(np->msi_x_entry[NV_MSI_X_VECTOR_RX].vector, &nv_nic_irq_rx, SA_SHIRQ, dev->name, dev) != 0) {
+ printk(KERN_INFO "forcedeth: request_irq failed for rx %d\n", ret);
+ pci_disable_msix(np->pci_dev);
+ np->msi_flags &= ~NV_MSI_X_ENABLED;
+ goto out_drain;
+ }
+ /* Request irq for tx handling */
+ if (request_irq(np->msi_x_entry[NV_MSI_X_VECTOR_TX].vector, &nv_nic_irq_tx, SA_SHIRQ, dev->name, dev) != 0) {
+ printk(KERN_INFO "forcedeth: request_irq failed for tx %d\n", ret);
+ pci_disable_msix(np->pci_dev);
+ np->msi_flags &= ~NV_MSI_X_ENABLED;
+ goto out_drain;
+ }
+ /* Request irq for link and timer handling */
+ if (request_irq(np->msi_x_entry[NV_MSI_X_VECTOR_OTHER].vector, &nv_nic_irq_other, SA_SHIRQ, dev->name, dev) != 0) {
+ printk(KERN_INFO "forcedeth: request_irq failed for link %d\n", ret);
+ pci_disable_msix(np->pci_dev);
+ np->msi_flags &= ~NV_MSI_X_ENABLED;
+ goto out_drain;
+ }
+
+ /* map interrupts to their respective vector */
+ writel(0, base + NvRegMSIXMap0);
+ writel(0, base + NvRegMSIXMap1);
+ set_msix_vector_map(dev, NV_MSI_X_VECTOR_RX, NVREG_IRQ_RX_ALL);
+ set_msix_vector_map(dev, NV_MSI_X_VECTOR_TX, NVREG_IRQ_TX_ALL);
+ set_msix_vector_map(dev, NV_MSI_X_VECTOR_OTHER, NVREG_IRQ_OTHER);
+ } else {
+ /* Request irq for all interrupts */
+ if (request_irq(np->msi_x_entry[NV_MSI_X_VECTOR_ALL].vector, &nv_nic_irq, SA_SHIRQ, dev->name, dev) != 0) {
+ printk(KERN_INFO "forcedeth: request_irq failed %d\n", ret);
+ pci_disable_msix(np->pci_dev);
+ np->msi_flags &= ~NV_MSI_X_ENABLED;
+ goto out_drain;
+ }
+
+ /* map interrupts to vector 0 */
+ writel(0, base + NvRegMSIXMap0);
+ writel(0, base + NvRegMSIXMap1);
+ }
+ }
+ }
+ if (ret != 0 && np->msi_flags & NV_MSI_CAPABLE) {
+ if ((ret = pci_enable_msi(np->pci_dev)) == 0) {
+ np->msi_flags |= NV_MSI_ENABLED;
+ if (request_irq(np->pci_dev->irq, &nv_nic_irq, SA_SHIRQ, dev->name, dev) != 0) {
+ printk(KERN_INFO "forcedeth: request_irq failed %d\n", ret);
+ pci_disable_msi(np->pci_dev);
+ np->msi_flags &= ~NV_MSI_ENABLED;
+ goto out_drain;
+ }
+
+ /* map interrupts to vector 0 */
+ writel(0, base + NvRegMSIMap0);
+ writel(0, base + NvRegMSIMap1);
+ /* enable msi vector 0 */
+ writel(NVREG_MSI_VECTOR_0_ENABLED, base + NvRegMSIIrqMask);
+ }
+ }
+ if (ret != 0) {
+ if (request_irq(np->pci_dev->irq, &nv_nic_irq, SA_SHIRQ, dev->name, dev) != 0)
+ goto out_drain;
+ }
/* ask for interrupts */
writel(np->irqmask, base + NvRegIrqMask);
@@ -2364,6 +2810,7 @@
{
struct fe_priv *np = netdev_priv(dev);
u8 __iomem *base;
+ int i;
spin_lock_irq(&np->lock);
np->in_shutdown = 1;
@@ -2381,13 +2828,31 @@
/* disable interrupts on the nic or we will lock up */
base = get_hwbase(dev);
- writel(0, base + NvRegIrqMask);
+ if (np->msi_flags & NV_MSI_X_ENABLED) {
+ writel(np->irqmask, base + NvRegIrqMask);
+ } else {
+ if (np->msi_flags & NV_MSI_ENABLED)
+ writel(0, base + NvRegMSIIrqMask);
+ writel(0, base + NvRegIrqMask);
+ }
pci_push(base);
dprintk(KERN_INFO "%s: Irqmask is zero again\n", dev->name);
spin_unlock_irq(&np->lock);
- free_irq(dev->irq, dev);
+ if (np->msi_flags & NV_MSI_X_ENABLED) {
+ for (i = 0; i < (np->msi_flags & NV_MSI_X_VECTORS_MASK); i++) {
+ free_irq(np->msi_x_entry[i].vector, dev);
+ }
+ pci_disable_msix(np->pci_dev);
+ np->msi_flags &= ~NV_MSI_X_ENABLED;
+ } else {
+ free_irq(np->pci_dev->irq, dev);
+ if (np->msi_flags & NV_MSI_ENABLED) {
+ pci_disable_msi(np->pci_dev);
+ np->msi_flags &= ~NV_MSI_ENABLED;
+ }
+ }
drain_ring(dev);
@@ -2471,7 +2936,14 @@
printk(KERN_INFO "forcedeth: 64-bit DMA failed, using 32-bit addressing for device %s.\n",
pci_name(pci_dev));
} else {
- dev->features |= NETIF_F_HIGHDMA;
+ if (pci_set_consistent_dma_mask(pci_dev, 0x0000007fffffffffULL)) {
+ printk(KERN_INFO "forcedeth: 64-bit DMA (consistent) failed for device %s.\n",
+ pci_name(pci_dev));
+ goto out_relreg;
+ } else {
+ dev->features |= NETIF_F_HIGHDMA;
+ printk(KERN_INFO "forcedeth: using HIGHDMA\n");
+ }
}
np->txrxctl_bits = NVREG_TXRXCTL_DESC_3;
} else if (id->driver_data & DEV_HAS_LARGEDESC) {
@@ -2496,6 +2968,22 @@
#endif
}
+ np->vlanctl_bits = 0;
+ if (id->driver_data & DEV_HAS_VLAN) {
+ np->vlanctl_bits = NVREG_VLANCONTROL_ENABLE;
+ dev->features |= NETIF_F_HW_VLAN_RX | NETIF_F_HW_VLAN_TX;
+ dev->vlan_rx_register = nv_vlan_rx_register;
+ dev->vlan_rx_kill_vid = nv_vlan_rx_kill_vid;
+ }
+
+ np->msi_flags = 0;
+ if ((id->driver_data & DEV_HAS_MSI) && !disable_msi) {
+ np->msi_flags |= NV_MSI_CAPABLE;
+ }
+ if ((id->driver_data & DEV_HAS_MSI_X) && !disable_msix) {
+ np->msi_flags |= NV_MSI_X_CAPABLE;
+ }
+
err = -ENOMEM;
np->base = ioremap(addr, NV_PCI_REGSZ);
if (!np->base)
@@ -2578,10 +3066,15 @@
} else {
np->tx_flags = NV_TX2_VALID;
}
- if (optimization_mode == NV_OPTIMIZATION_MODE_THROUGHPUT)
+ if (optimization_mode == NV_OPTIMIZATION_MODE_THROUGHPUT) {
np->irqmask = NVREG_IRQMASK_THROUGHPUT;
- else
+ if (np->msi_flags & NV_MSI_X_CAPABLE) /* set number of vectors */
+ np->msi_flags |= 0x0003;
+ } else {
np->irqmask = NVREG_IRQMASK_CPU;
+ if (np->msi_flags & NV_MSI_X_CAPABLE) /* set number of vectors */
+ np->msi_flags |= 0x0001;
+ }
if (id->driver_data & DEV_NEED_TIMERIRQ)
np->irqmask |= NVREG_IRQ_TIMER;
@@ -2737,11 +3230,11 @@
},
{ /* MCP55 Ethernet Controller */
PCI_DEVICE(PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NVENET_14),
- .driver_data = DEV_NEED_TIMERIRQ|DEV_NEED_LINKTIMER|DEV_HAS_LARGEDESC|DEV_HAS_CHECKSUM|DEV_HAS_HIGH_DMA,
+ .driver_data = DEV_NEED_TIMERIRQ|DEV_NEED_LINKTIMER|DEV_HAS_LARGEDESC|DEV_HAS_CHECKSUM|DEV_HAS_HIGH_DMA|DEV_HAS_VLAN|DEV_HAS_MSI|DEV_HAS_MSI_X,
},
{ /* MCP55 Ethernet Controller */
PCI_DEVICE(PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NVENET_15),
- .driver_data = DEV_NEED_TIMERIRQ|DEV_NEED_LINKTIMER|DEV_HAS_LARGEDESC|DEV_HAS_CHECKSUM|DEV_HAS_HIGH_DMA,
+ .driver_data = DEV_NEED_TIMERIRQ|DEV_NEED_LINKTIMER|DEV_HAS_LARGEDESC|DEV_HAS_CHECKSUM|DEV_HAS_HIGH_DMA|DEV_HAS_VLAN|DEV_HAS_MSI|DEV_HAS_MSI_X,
},
{0,},
};
@@ -2771,6 +3264,10 @@
MODULE_PARM_DESC(optimization_mode, "In throughput mode (0), every tx & rx packet will generate an interrupt. In CPU mode (1), interrupts are controlled by a timer.");
module_param(poll_interval, int, 0);
MODULE_PARM_DESC(poll_interval, "Interval determines how frequent timer interrupt is generated by [(time_in_micro_secs * 100) / (2^10)]. Min is 0 and Max is 65535.");
+module_param(disable_msi, int, 0);
+MODULE_PARM_DESC(disable_msi, "Disable MSI interrupts by setting to 1.");
+module_param(disable_msix, int, 0);
+MODULE_PARM_DESC(disable_msix, "Disable MSIX interrupts by setting to 1.");
MODULE_AUTHOR("Manfred Spraul <manfred@colorfullife.com>");
MODULE_DESCRIPTION("Reverse Engineered nForce ethernet driver");
diff --git a/drivers/net/hamachi.c b/drivers/net/hamachi.c
index bc9a3bf..0ea4cb4 100644
--- a/drivers/net/hamachi.c
+++ b/drivers/net/hamachi.c
@@ -427,7 +427,7 @@
static void hamachi_timer(unsigned long data);
enum capability_flags {CanHaveMII=1, };
-static struct chip_info {
+static const struct chip_info {
u16 vendor_id, device_id, device_id_mask, pad;
const char *name;
void (*media_timer)(unsigned long data);
diff --git a/drivers/net/hamradio/baycom_epp.c b/drivers/net/hamradio/baycom_epp.c
index e4188d0..9220de9 100644
--- a/drivers/net/hamradio/baycom_epp.c
+++ b/drivers/net/hamradio/baycom_epp.c
@@ -905,7 +905,7 @@
/* autoprobe baud rate */
tstart = jiffies;
i = 0;
- while ((signed)(jiffies-tstart-HZ/3) < 0) {
+ while (time_before(jiffies, tstart + HZ/3)) {
if (pp->ops->epp_read_addr(pp, &stat, 1, 0) != 1)
goto epptimeout;
if ((stat & (EPP_NRAEF|EPP_NRHF)) == EPP_NRHF) {
diff --git a/drivers/net/hp100.c b/drivers/net/hp100.c
index 55c7ed6..247c8ca 100644
--- a/drivers/net/hp100.c
+++ b/drivers/net/hp100.c
@@ -115,6 +115,7 @@
#include <linux/delay.h>
#include <linux/init.h>
#include <linux/bitops.h>
+#include <linux/jiffies.h>
#include <asm/io.h>
@@ -1499,7 +1500,7 @@
printk("hp100: %s: start_xmit_bm: No TX PDL available.\n", dev->name);
#endif
/* not waited long enough since last tx? */
- if (jiffies - dev->trans_start < HZ)
+ if (time_before(jiffies, dev->trans_start + HZ))
return -EAGAIN;
if (hp100_check_lan(dev))
@@ -1652,7 +1653,7 @@
printk("hp100: %s: start_xmit: tx free mem = 0x%x\n", dev->name, i);
#endif
/* not waited long enough since last failed tx try? */
- if (jiffies - dev->trans_start < HZ) {
+ if (time_before(jiffies, dev->trans_start + HZ)) {
#ifdef HP100_DEBUG
printk("hp100: %s: trans_start timing problem\n",
dev->name);
@@ -1718,17 +1719,10 @@
hp100_outw(i, FRAGMENT_LEN); /* and first/only fragment length */
if (lp->mode == 2) { /* memory mapped */
- if (lp->mem_ptr_virt) { /* high pci memory was remapped */
- /* Note: The J2585B needs alignment to 32bits here! */
- memcpy_toio(lp->mem_ptr_virt, skb->data, (skb->len + 3) & ~3);
- if (!ok_flag)
- memset_io(lp->mem_ptr_virt, 0, HP100_MIN_PACKET_SIZE - skb->len);
- } else {
- /* Note: The J2585B needs alignment to 32bits here! */
- isa_memcpy_toio(lp->mem_ptr_phys, skb->data, (skb->len + 3) & ~3);
- if (!ok_flag)
- isa_memset_io(lp->mem_ptr_phys, 0, HP100_MIN_PACKET_SIZE - skb->len);
- }
+ /* Note: The J2585B needs alignment to 32bits here! */
+ memcpy_toio(lp->mem_ptr_virt, skb->data, (skb->len + 3) & ~3);
+ if (!ok_flag)
+ memset_io(lp->mem_ptr_virt, 0, HP100_MIN_PACKET_SIZE - skb->len);
} else { /* programmed i/o */
outsl(ioaddr + HP100_REG_DATA32, skb->data,
(skb->len + 3) >> 2);
@@ -1798,10 +1792,7 @@
/* First we get the header, which contains information about the */
/* actual length of the received packet. */
if (lp->mode == 2) { /* memory mapped mode */
- if (lp->mem_ptr_virt) /* if memory was remapped */
- header = readl(lp->mem_ptr_virt);
- else
- header = isa_readl(lp->mem_ptr_phys);
+ header = readl(lp->mem_ptr_virt);
} else /* programmed i/o */
header = hp100_inl(DATA32);
@@ -1833,13 +1824,9 @@
ptr = skb->data;
/* Now transfer the data from the card into that area */
- if (lp->mode == 2) {
- if (lp->mem_ptr_virt)
- memcpy_fromio(ptr, lp->mem_ptr_virt,pkt_len);
- /* Note alignment to 32bit transfers */
- else
- isa_memcpy_fromio(ptr, lp->mem_ptr_phys, pkt_len);
- } else /* io mapped */
+ if (lp->mode == 2)
+ memcpy_fromio(ptr, lp->mem_ptr_virt,pkt_len);
+ else /* io mapped */
insl(ioaddr + HP100_REG_DATA32, ptr, pkt_len >> 2);
skb->protocol = eth_type_trans(skb, dev);
diff --git a/drivers/net/ibm_emac/ibm_emac_core.c b/drivers/net/ibm_emac/ibm_emac_core.c
index 591c586..7e49522 100644
--- a/drivers/net/ibm_emac/ibm_emac_core.c
+++ b/drivers/net/ibm_emac/ibm_emac_core.c
@@ -204,7 +204,7 @@
static inline void emac_tx_enable(struct ocp_enet_private *dev)
{
- struct emac_regs *p = dev->emacp;
+ struct emac_regs __iomem *p = dev->emacp;
unsigned long flags;
u32 r;
@@ -220,7 +220,7 @@
static void emac_tx_disable(struct ocp_enet_private *dev)
{
- struct emac_regs *p = dev->emacp;
+ struct emac_regs __iomem *p = dev->emacp;
unsigned long flags;
u32 r;
@@ -244,7 +244,7 @@
static void emac_rx_enable(struct ocp_enet_private *dev)
{
- struct emac_regs *p = dev->emacp;
+ struct emac_regs __iomem *p = dev->emacp;
unsigned long flags;
u32 r;
@@ -275,7 +275,7 @@
static void emac_rx_disable(struct ocp_enet_private *dev)
{
- struct emac_regs *p = dev->emacp;
+ struct emac_regs __iomem *p = dev->emacp;
unsigned long flags;
u32 r;
@@ -299,7 +299,7 @@
static inline void emac_rx_disable_async(struct ocp_enet_private *dev)
{
- struct emac_regs *p = dev->emacp;
+ struct emac_regs __iomem *p = dev->emacp;
unsigned long flags;
u32 r;
@@ -315,7 +315,7 @@
static int emac_reset(struct ocp_enet_private *dev)
{
- struct emac_regs *p = dev->emacp;
+ struct emac_regs __iomem *p = dev->emacp;
unsigned long flags;
int n = 20;
@@ -348,7 +348,7 @@
static void emac_hash_mc(struct ocp_enet_private *dev)
{
- struct emac_regs *p = dev->emacp;
+ struct emac_regs __iomem *p = dev->emacp;
u16 gaht[4] = { 0 };
struct dev_mc_list *dmi;
@@ -393,7 +393,7 @@
/* BHs disabled */
static int emac_configure(struct ocp_enet_private *dev)
{
- struct emac_regs *p = dev->emacp;
+ struct emac_regs __iomem *p = dev->emacp;
struct net_device *ndev = dev->ndev;
int gige;
u32 r;
@@ -555,7 +555,7 @@
static int __emac_mdio_read(struct ocp_enet_private *dev, u8 id, u8 reg)
{
- struct emac_regs *p = dev->emacp;
+ struct emac_regs __iomem *p = dev->emacp;
u32 r;
int n;
@@ -604,7 +604,7 @@
static void __emac_mdio_write(struct ocp_enet_private *dev, u8 id, u8 reg,
u16 val)
{
- struct emac_regs *p = dev->emacp;
+ struct emac_regs __iomem *p = dev->emacp;
int n;
DBG2("%d: mdio_write(%02x,%02x,%04x)" NL, dev->def->index, id, reg,
@@ -666,7 +666,7 @@
static void emac_set_multicast_list(struct net_device *ndev)
{
struct ocp_enet_private *dev = ndev->priv;
- struct emac_regs *p = dev->emacp;
+ struct emac_regs __iomem *p = dev->emacp;
u32 rmr = emac_iff2rmr(ndev);
DBG("%d: multicast %08x" NL, dev->def->index, rmr);
@@ -825,7 +825,7 @@
}
static inline int emac_alloc_rx_skb(struct ocp_enet_private *dev, int slot,
- int flags)
+ gfp_t flags)
{
struct sk_buff *skb = alloc_skb(dev->rx_skb_size, flags);
if (unlikely(!skb))
@@ -1047,7 +1047,7 @@
static inline int emac_xmit_finish(struct ocp_enet_private *dev, int len)
{
- struct emac_regs *p = dev->emacp;
+ struct emac_regs __iomem *p = dev->emacp;
struct net_device *ndev = dev->ndev;
/* Send the packet out */
@@ -1519,7 +1519,7 @@
static irqreturn_t emac_irq(int irq, void *dev_instance, struct pt_regs *regs)
{
struct ocp_enet_private *dev = dev_instance;
- struct emac_regs *p = dev->emacp;
+ struct emac_regs __iomem *p = dev->emacp;
struct ibm_emac_error_stats *st = &dev->estats;
u32 isr = in_be32(&p->isr);
@@ -1619,17 +1619,17 @@
DBG("%d: remove" NL, dev->def->index);
- ocp_set_drvdata(ocpdev, 0);
+ ocp_set_drvdata(ocpdev, NULL);
unregister_netdev(dev->ndev);
tah_fini(dev->tah_dev);
rgmii_fini(dev->rgmii_dev, dev->rgmii_input);
zmii_fini(dev->zmii_dev, dev->zmii_input);
- emac_dbg_register(dev->def->index, 0);
+ emac_dbg_register(dev->def->index, NULL);
mal_unregister_commac(dev->mal, &dev->commac);
- iounmap((void *)dev->emacp);
+ iounmap(dev->emacp);
kfree(dev->ndev);
}
@@ -2048,9 +2048,7 @@
goto out4;
/* Map EMAC regs */
- dev->emacp =
- (struct emac_regs *)ioremap(dev->def->paddr,
- sizeof(struct emac_regs));
+ dev->emacp = ioremap(dev->def->paddr, sizeof(struct emac_regs));
if (!dev->emacp) {
printk(KERN_ERR "emac%d: could not ioremap device registers!\n",
dev->def->index);
@@ -2210,7 +2208,7 @@
return 0;
out6:
- iounmap((void *)dev->emacp);
+ iounmap(dev->emacp);
out5:
tah_fini(dev->tah_dev);
out4:
diff --git a/drivers/net/ibm_emac/ibm_emac_core.h b/drivers/net/ibm_emac/ibm_emac_core.h
index 911abba..f61273b 100644
--- a/drivers/net/ibm_emac/ibm_emac_core.h
+++ b/drivers/net/ibm_emac/ibm_emac_core.h
@@ -155,7 +155,7 @@
struct ocp_enet_private {
struct net_device *ndev; /* 0 */
- struct emac_regs *emacp;
+ struct emac_regs __iomem *emacp;
struct mal_descriptor *tx_desc;
int tx_cnt;
diff --git a/drivers/net/ibm_emac/ibm_emac_debug.c b/drivers/net/ibm_emac/ibm_emac_debug.c
index 75d3b86..c7e1ecf 100644
--- a/drivers/net/ibm_emac/ibm_emac_debug.c
+++ b/drivers/net/ibm_emac/ibm_emac_debug.c
@@ -58,7 +58,7 @@
static void emac_mac_dump(int idx, struct ocp_enet_private *dev)
{
- struct emac_regs *p = dev->emacp;
+ struct emac_regs __iomem *p = dev->emacp;
printk("** EMAC%d registers **\n"
"MR0 = 0x%08x MR1 = 0x%08x TMR0 = 0x%08x TMR1 = 0x%08x\n"
diff --git a/drivers/net/ibm_emac/ibm_emac_rgmii.h b/drivers/net/ibm_emac/ibm_emac_rgmii.h
index a1ffb8a..7f03d53 100644
--- a/drivers/net/ibm_emac/ibm_emac_rgmii.h
+++ b/drivers/net/ibm_emac/ibm_emac_rgmii.h
@@ -31,7 +31,7 @@
/* RGMII device */
struct ibm_ocp_rgmii {
- struct rgmii_regs *base;
+ struct rgmii_regs __iomem *base;
int users; /* number of EMACs using this RGMII bridge */
};
diff --git a/drivers/net/ibm_emac/ibm_emac_zmii.c b/drivers/net/ibm_emac/ibm_emac_zmii.c
index 35c1185..e129e0a 100644
--- a/drivers/net/ibm_emac/ibm_emac_zmii.c
+++ b/drivers/net/ibm_emac/ibm_emac_zmii.c
@@ -80,7 +80,7 @@
static int __init zmii_init(struct ocp_device *ocpdev, int input, int *mode)
{
struct ibm_ocp_zmii *dev = ocp_get_drvdata(ocpdev);
- struct zmii_regs *p;
+ struct zmii_regs __iomem *p;
ZMII_DBG("%d: init(%d, %d)" NL, ocpdev->def->index, input, *mode);
@@ -94,8 +94,7 @@
}
dev->mode = PHY_MODE_NA;
- p = (struct zmii_regs *)ioremap(ocpdev->def->paddr,
- sizeof(struct zmii_regs));
+ p = ioremap(ocpdev->def->paddr, sizeof(struct zmii_regs));
if (!p) {
printk(KERN_ERR
"zmii%d: could not ioremap device registers!\n",
@@ -231,7 +230,7 @@
if (!--dev->users) {
/* Free everything if this is the last user */
ocp_set_drvdata(ocpdev, NULL);
- iounmap((void *)dev->base);
+ iounmap(dev->base);
kfree(dev);
}
}
diff --git a/drivers/net/ibm_emac/ibm_emac_zmii.h b/drivers/net/ibm_emac/ibm_emac_zmii.h
index 0bb2606..92c8544 100644
--- a/drivers/net/ibm_emac/ibm_emac_zmii.h
+++ b/drivers/net/ibm_emac/ibm_emac_zmii.h
@@ -32,7 +32,7 @@
/* ZMII device */
struct ibm_ocp_zmii {
- struct zmii_regs *base;
+ struct zmii_regs __iomem *base;
int mode; /* subset of PHY_MODE_XXXX */
int users; /* number of EMACs using this ZMII bridge */
u32 fer_save; /* FER value left by firmware */
diff --git a/drivers/net/irda/Kconfig b/drivers/net/irda/Kconfig
index 7a08134..c81fe1c 100644
--- a/drivers/net/irda/Kconfig
+++ b/drivers/net/irda/Kconfig
@@ -283,7 +283,7 @@
Say Y here if you want to build support for the USB IrDA FIR Dongle
device driver. To compile it as a module, choose M here: the module
will be called irda-usb. IrDA-USB support the various IrDA USB
- dongles available and most of their pecularities. Those dongles
+ dongles available and most of their peculiarities. Those dongles
plug in the USB port of your computer, are plug and play, and
support SIR and FIR (4Mbps) speeds. On the other hand, those
dongles tend to be less efficient than a FIR chipset.
@@ -360,7 +360,7 @@
help
Say Y here if you want to build support for the ALi M5123 FIR
Controller. The ALi M5123 FIR Controller is embedded in ALi M1543C,
- M1535, M1535D, M1535+, M1535D Sourth Bridge. This driver supports
+ M1535, M1535D, M1535+, M1535D South Bridge. This driver supports
SIR, MIR and FIR (4Mbps) speeds.
To compile it as a module, choose M here: the module will be called
diff --git a/drivers/net/macsonic.c b/drivers/net/macsonic.c
index 02d5c68..f6f3daf 100644
--- a/drivers/net/macsonic.c
+++ b/drivers/net/macsonic.c
@@ -622,7 +622,7 @@
return 0;
out_unregister:
- driver_unregister(&mac_sonic_driver);
+ platform_driver_unregister(&mac_sonic_driver);
return -ENOMEM;
}
diff --git a/drivers/net/mv643xx_eth.c b/drivers/net/mv643xx_eth.c
index c0998ef..9f26613 100644
--- a/drivers/net/mv643xx_eth.c
+++ b/drivers/net/mv643xx_eth.c
@@ -10,7 +10,7 @@
*
* Copyright (C) 2003 Ralf Baechle <ralf@linux-mips.org>
*
- * Copyright (C) 2004-2005 MontaVista Software, Inc.
+ * Copyright (C) 2004-2006 MontaVista Software, Inc.
* Dale Farnsworth <dale@farnsworth.org>
*
* Copyright (C) 2004 Steven J. Hill <sjhill1@rockwellcollins.com>
@@ -37,8 +37,6 @@
#include <linux/tcp.h>
#include <linux/udp.h>
#include <linux/etherdevice.h>
-#include <linux/in.h>
-#include <linux/ip.h>
#include <linux/bitops.h>
#include <linux/delay.h>
@@ -52,39 +50,16 @@
#include <asm/delay.h>
#include "mv643xx_eth.h"
-/*
- * The first part is the high level driver of the gigE ethernet ports.
- */
-
-/* Constants */
-#define VLAN_HLEN 4
-#define FCS_LEN 4
-#define DMA_ALIGN 8 /* hw requires 8-byte alignment */
-#define HW_IP_ALIGN 2 /* hw aligns IP header */
-#define WRAP HW_IP_ALIGN + ETH_HLEN + VLAN_HLEN + FCS_LEN
-#define RX_SKB_SIZE ((dev->mtu + WRAP + 7) & ~0x7)
-
-#define INT_UNMASK_ALL 0x0007ffff
-#define INT_UNMASK_ALL_EXT 0x0011ffff
-#define INT_MASK_ALL 0x00000000
-#define INT_MASK_ALL_EXT 0x00000000
-#define INT_CAUSE_CHECK_BITS INT_CAUSE_UNMASK_ALL
-#define INT_CAUSE_CHECK_BITS_EXT INT_CAUSE_UNMASK_ALL_EXT
-
-#ifdef MV643XX_CHECKSUM_OFFLOAD_TX
-#define MAX_DESCS_PER_SKB (MAX_SKB_FRAGS + 1)
-#else
-#define MAX_DESCS_PER_SKB 1
-#endif
-
-#define PHY_WAIT_ITERATIONS 1000 /* 1000 iterations * 10uS = 10mS max */
-#define PHY_WAIT_MICRO_SECONDS 10
-
/* Static function declarations */
-static int eth_port_link_is_up(unsigned int eth_port_num);
static void eth_port_uc_addr_get(struct net_device *dev,
unsigned char *MacAddr);
static void eth_port_set_multicast_list(struct net_device *);
+static void mv643xx_eth_port_enable_tx(unsigned int port_num,
+ unsigned int queues);
+static void mv643xx_eth_port_enable_rx(unsigned int port_num,
+ unsigned int queues);
+static unsigned int mv643xx_eth_port_disable_tx(unsigned int port_num);
+static unsigned int mv643xx_eth_port_disable_rx(unsigned int port_num);
static int mv643xx_eth_open(struct net_device *);
static int mv643xx_eth_stop(struct net_device *);
static int mv643xx_eth_change_mtu(struct net_device *, int);
@@ -93,8 +68,12 @@
#ifdef MV643XX_NAPI
static int mv643xx_poll(struct net_device *dev, int *budget);
#endif
+static int ethernet_phy_get(unsigned int eth_port_num);
static void ethernet_phy_set(unsigned int eth_port_num, int phy_addr);
static int ethernet_phy_detect(unsigned int eth_port_num);
+static int mv643xx_mdio_read(struct net_device *dev, int phy_id, int location);
+static void mv643xx_mdio_write(struct net_device *dev, int phy_id, int location, int val);
+static int mv643xx_eth_do_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd);
static struct ethtool_ops mv643xx_ethtool_ops;
static char mv643xx_driver_name[] = "mv643xx_eth";
@@ -153,67 +132,53 @@
}
/*
- * mv643xx_eth_rx_task
+ * mv643xx_eth_rx_refill_descs
*
* Fills / refills RX queue on a certain gigabit ethernet port
*
* Input : pointer to ethernet interface network device structure
* Output : N/A
*/
-static void mv643xx_eth_rx_task(void *data)
+static void mv643xx_eth_rx_refill_descs(struct net_device *dev)
{
- struct net_device *dev = (struct net_device *)data;
struct mv643xx_private *mp = netdev_priv(dev);
struct pkt_info pkt_info;
struct sk_buff *skb;
int unaligned;
- if (test_and_set_bit(0, &mp->rx_task_busy))
- panic("%s: Error in test_set_bit / clear_bit", dev->name);
-
- while (mp->rx_ring_skbs < (mp->rx_ring_size - 5)) {
- skb = dev_alloc_skb(RX_SKB_SIZE + DMA_ALIGN);
+ while (mp->rx_desc_count < mp->rx_ring_size) {
+ skb = dev_alloc_skb(ETH_RX_SKB_SIZE + ETH_DMA_ALIGN);
if (!skb)
break;
- mp->rx_ring_skbs++;
- unaligned = (u32)skb->data & (DMA_ALIGN - 1);
+ mp->rx_desc_count++;
+ unaligned = (u32)skb->data & (ETH_DMA_ALIGN - 1);
if (unaligned)
- skb_reserve(skb, DMA_ALIGN - unaligned);
+ skb_reserve(skb, ETH_DMA_ALIGN - unaligned);
pkt_info.cmd_sts = ETH_RX_ENABLE_INTERRUPT;
- pkt_info.byte_cnt = RX_SKB_SIZE;
- pkt_info.buf_ptr = dma_map_single(NULL, skb->data, RX_SKB_SIZE,
- DMA_FROM_DEVICE);
+ pkt_info.byte_cnt = ETH_RX_SKB_SIZE;
+ pkt_info.buf_ptr = dma_map_single(NULL, skb->data,
+ ETH_RX_SKB_SIZE, DMA_FROM_DEVICE);
pkt_info.return_info = skb;
if (eth_rx_return_buff(mp, &pkt_info) != ETH_OK) {
printk(KERN_ERR
"%s: Error allocating RX Ring\n", dev->name);
break;
}
- skb_reserve(skb, HW_IP_ALIGN);
+ skb_reserve(skb, ETH_HW_IP_ALIGN);
}
- clear_bit(0, &mp->rx_task_busy);
/*
* If RX ring is empty of SKB, set a timer to try allocating
- * again in a later time .
+ * again at a later time.
*/
- if ((mp->rx_ring_skbs == 0) && (mp->rx_timer_flag == 0)) {
+ if (mp->rx_desc_count == 0) {
printk(KERN_INFO "%s: Rx ring is empty\n", dev->name);
- /* After 100mSec */
- mp->timeout.expires = jiffies + (HZ / 10);
+ mp->timeout.expires = jiffies + (HZ / 10); /* 100 mSec */
add_timer(&mp->timeout);
- mp->rx_timer_flag = 1;
}
-#ifdef MV643XX_RX_QUEUE_FILL_ON_TASK
- else {
- /* Return interrupts */
- mv_write(MV643XX_ETH_INTERRUPT_MASK_REG(mp->port_num),
- INT_UNMASK_ALL);
- }
-#endif
}
/*
- * mv643xx_eth_rx_task_timer_wrapper
+ * mv643xx_eth_rx_refill_descs_timer_wrapper
*
* Timer routine to wake up RX queue filling task. This function is
* used only in case the RX queue is empty, and all alloc_skb has
@@ -222,13 +187,9 @@
* Input : pointer to ethernet interface network device structure
* Output : N/A
*/
-static void mv643xx_eth_rx_task_timer_wrapper(unsigned long data)
+static inline void mv643xx_eth_rx_refill_descs_timer_wrapper(unsigned long data)
{
- struct net_device *dev = (struct net_device *)data;
- struct mv643xx_private *mp = netdev_priv(dev);
-
- mp->rx_timer_flag = 0;
- mv643xx_eth_rx_task((void *)data);
+ mv643xx_eth_rx_refill_descs((struct net_device *)data);
}
/*
@@ -245,8 +206,7 @@
unsigned int port_num = mp->port_num;
eth_port_init_mac_tables(port_num);
- memcpy(mp->port_mac_addr, dev->dev_addr, 6);
- eth_port_uc_addr_set(port_num, mp->port_mac_addr);
+ eth_port_uc_addr_set(port_num, dev->dev_addr);
}
/*
@@ -260,13 +220,14 @@
static void mv643xx_eth_set_rx_mode(struct net_device *dev)
{
struct mv643xx_private *mp = netdev_priv(dev);
+ u32 config_reg;
+ config_reg = mv_read(MV643XX_ETH_PORT_CONFIG_REG(mp->port_num));
if (dev->flags & IFF_PROMISC)
- mp->port_config |= (u32) MV643XX_ETH_UNICAST_PROMISCUOUS_MODE;
+ config_reg |= (u32) MV643XX_ETH_UNICAST_PROMISCUOUS_MODE;
else
- mp->port_config &= ~(u32) MV643XX_ETH_UNICAST_PROMISCUOUS_MODE;
-
- mv_write(MV643XX_ETH_PORT_CONFIG_REG(mp->port_num), mp->port_config);
+ config_reg &= ~(u32) MV643XX_ETH_UNICAST_PROMISCUOUS_MODE;
+ mv_write(MV643XX_ETH_PORT_CONFIG_REG(mp->port_num), config_reg);
eth_port_set_multicast_list(dev);
}
@@ -322,53 +283,82 @@
netif_device_detach(dev);
eth_port_reset(mp->port_num);
- eth_port_start(mp);
+ eth_port_start(dev);
netif_device_attach(dev);
}
-/*
- * mv643xx_eth_free_tx_queue
+/**
+ * mv643xx_eth_free_tx_descs - Free the tx desc data for completed descriptors
*
- * Input : dev - a pointer to the required interface
- *
- * Output : 0 if was able to release skb , nonzero otherwise
+ * If force is non-zero, frees uncompleted descriptors as well
*/
-static int mv643xx_eth_free_tx_queue(struct net_device *dev,
- unsigned int eth_int_cause_ext)
+int mv643xx_eth_free_tx_descs(struct net_device *dev, int force)
{
struct mv643xx_private *mp = netdev_priv(dev);
- struct net_device_stats *stats = &mp->stats;
- struct pkt_info pkt_info;
- int released = 1;
+ struct eth_tx_desc *desc;
+ u32 cmd_sts;
+ struct sk_buff *skb;
+ unsigned long flags;
+ int tx_index;
+ dma_addr_t addr;
+ int count;
+ int released = 0;
- if (!(eth_int_cause_ext & (BIT0 | BIT8)))
- return released;
+ while (mp->tx_desc_count > 0) {
+ spin_lock_irqsave(&mp->lock, flags);
+ tx_index = mp->tx_used_desc_q;
+ desc = &mp->p_tx_desc_area[tx_index];
+ cmd_sts = desc->cmd_sts;
- /* Check only queue 0 */
- while (eth_tx_return_desc(mp, &pkt_info) == ETH_OK) {
- if (pkt_info.cmd_sts & BIT0) {
+ if (!force && (cmd_sts & ETH_BUFFER_OWNED_BY_DMA)) {
+ spin_unlock_irqrestore(&mp->lock, flags);
+ return released;
+ }
+
+ mp->tx_used_desc_q = (tx_index + 1) % mp->tx_ring_size;
+ mp->tx_desc_count--;
+
+ addr = desc->buf_ptr;
+ count = desc->byte_cnt;
+ skb = mp->tx_skb[tx_index];
+ if (skb)
+ mp->tx_skb[tx_index] = NULL;
+
+ spin_unlock_irqrestore(&mp->lock, flags);
+
+ if (cmd_sts & ETH_ERROR_SUMMARY) {
printk("%s: Error in TX\n", dev->name);
- stats->tx_errors++;
+ mp->stats.tx_errors++;
}
- if (pkt_info.cmd_sts & ETH_TX_FIRST_DESC)
- dma_unmap_single(NULL, pkt_info.buf_ptr,
- pkt_info.byte_cnt,
- DMA_TO_DEVICE);
+ if (cmd_sts & ETH_TX_FIRST_DESC)
+ dma_unmap_single(NULL, addr, count, DMA_TO_DEVICE);
else
- dma_unmap_page(NULL, pkt_info.buf_ptr,
- pkt_info.byte_cnt,
- DMA_TO_DEVICE);
+ dma_unmap_page(NULL, addr, count, DMA_TO_DEVICE);
- if (pkt_info.return_info) {
- dev_kfree_skb_irq(pkt_info.return_info);
- released = 0;
- }
+ if (skb)
+ dev_kfree_skb_irq(skb);
+
+ released = 1;
}
return released;
}
+static void mv643xx_eth_free_completed_tx_descs(struct net_device *dev)
+{
+ struct mv643xx_private *mp = netdev_priv(dev);
+
+ if (mv643xx_eth_free_tx_descs(dev, 0) &&
+ mp->tx_ring_size - mp->tx_desc_count >= MAX_DESCS_PER_SKB)
+ netif_wake_queue(dev);
+}
+
+static void mv643xx_eth_free_all_tx_descs(struct net_device *dev)
+{
+ mv643xx_eth_free_tx_descs(dev, 1);
+}
+
/*
* mv643xx_eth_receive
*
@@ -380,11 +370,7 @@
*
* Output : number of served packets
*/
-#ifdef MV643XX_NAPI
static int mv643xx_eth_receive_queue(struct net_device *dev, int budget)
-#else
-static int mv643xx_eth_receive_queue(struct net_device *dev)
-#endif
{
struct mv643xx_private *mp = netdev_priv(dev);
struct net_device_stats *stats = &mp->stats;
@@ -392,15 +378,14 @@
struct sk_buff *skb;
struct pkt_info pkt_info;
-#ifdef MV643XX_NAPI
while (budget-- > 0 && eth_port_receive(mp, &pkt_info) == ETH_OK) {
-#else
- while (eth_port_receive(mp, &pkt_info) == ETH_OK) {
-#endif
- mp->rx_ring_skbs--;
+ mp->rx_desc_count--;
received_packets++;
- /* Update statistics. Note byte count includes 4 byte CRC count */
+ /*
+ * Update statistics.
+ * Note byte count includes 4 byte CRC count
+ */
stats->rx_packets++;
stats->rx_bytes += pkt_info.byte_cnt;
skb = pkt_info.return_info;
@@ -448,10 +433,61 @@
}
dev->last_rx = jiffies;
}
+ mv643xx_eth_rx_refill_descs(dev); /* Fill RX ring with skb's */
return received_packets;
}
+/* Set the mv643xx port configuration register for the speed/duplex mode. */
+static void mv643xx_eth_update_pscr(struct net_device *dev,
+ struct ethtool_cmd *ecmd)
+{
+ struct mv643xx_private *mp = netdev_priv(dev);
+ int port_num = mp->port_num;
+ u32 o_pscr, n_pscr;
+ unsigned int queues;
+
+ o_pscr = mv_read(MV643XX_ETH_PORT_SERIAL_CONTROL_REG(port_num));
+ n_pscr = o_pscr;
+
+ /* clear speed, duplex and rx buffer size fields */
+ n_pscr &= ~(MV643XX_ETH_SET_MII_SPEED_TO_100 |
+ MV643XX_ETH_SET_GMII_SPEED_TO_1000 |
+ MV643XX_ETH_SET_FULL_DUPLEX_MODE |
+ MV643XX_ETH_MAX_RX_PACKET_MASK);
+
+ if (ecmd->duplex == DUPLEX_FULL)
+ n_pscr |= MV643XX_ETH_SET_FULL_DUPLEX_MODE;
+
+ if (ecmd->speed == SPEED_1000)
+ n_pscr |= MV643XX_ETH_SET_GMII_SPEED_TO_1000 |
+ MV643XX_ETH_MAX_RX_PACKET_9700BYTE;
+ else {
+ if (ecmd->speed == SPEED_100)
+ n_pscr |= MV643XX_ETH_SET_MII_SPEED_TO_100;
+ n_pscr |= MV643XX_ETH_MAX_RX_PACKET_1522BYTE;
+ }
+
+ if (n_pscr != o_pscr) {
+ if ((o_pscr & MV643XX_ETH_SERIAL_PORT_ENABLE) == 0)
+ mv_write(MV643XX_ETH_PORT_SERIAL_CONTROL_REG(port_num),
+ n_pscr);
+ else {
+ queues = mv643xx_eth_port_disable_tx(port_num);
+
+ o_pscr &= ~MV643XX_ETH_SERIAL_PORT_ENABLE;
+ mv_write(MV643XX_ETH_PORT_SERIAL_CONTROL_REG(port_num),
+ o_pscr);
+ mv_write(MV643XX_ETH_PORT_SERIAL_CONTROL_REG(port_num),
+ n_pscr);
+ mv_write(MV643XX_ETH_PORT_SERIAL_CONTROL_REG(port_num),
+ n_pscr);
+ if (queues)
+ mv643xx_eth_port_enable_tx(port_num, queues);
+ }
+ }
+}
+
/*
* mv643xx_eth_int_handler
*
@@ -473,78 +509,52 @@
/* Read interrupt cause registers */
eth_int_cause = mv_read(MV643XX_ETH_INTERRUPT_CAUSE_REG(port_num)) &
- INT_UNMASK_ALL;
-
- if (eth_int_cause & BIT1)
+ ETH_INT_UNMASK_ALL;
+ if (eth_int_cause & ETH_INT_CAUSE_EXT) {
eth_int_cause_ext = mv_read(
MV643XX_ETH_INTERRUPT_CAUSE_EXTEND_REG(port_num)) &
- INT_UNMASK_ALL_EXT;
+ ETH_INT_UNMASK_ALL_EXT;
+ mv_write(MV643XX_ETH_INTERRUPT_CAUSE_EXTEND_REG(port_num),
+ ~eth_int_cause_ext);
+ }
-#ifdef MV643XX_NAPI
- if (!(eth_int_cause & 0x0007fffd)) {
- /* Dont ack the Rx interrupt */
-#endif
- /*
- * Clear specific ethernet port intrerrupt registers by
- * acknowleding relevant bits.
- */
- mv_write(MV643XX_ETH_INTERRUPT_CAUSE_REG(port_num),
- ~eth_int_cause);
- if (eth_int_cause_ext != 0x0)
- mv_write(MV643XX_ETH_INTERRUPT_CAUSE_EXTEND_REG
- (port_num), ~eth_int_cause_ext);
+ /* PHY status changed */
+ if (eth_int_cause_ext & ETH_INT_CAUSE_PHY) {
+ struct ethtool_cmd cmd;
- /* UDP change : We may need this */
- if ((eth_int_cause_ext & 0x0000ffff) &&
- (mv643xx_eth_free_tx_queue(dev, eth_int_cause_ext) == 0) &&
- (mp->tx_ring_size > mp->tx_ring_skbs + MAX_DESCS_PER_SKB))
- netif_wake_queue(dev);
-#ifdef MV643XX_NAPI
- } else {
- if (netif_rx_schedule_prep(dev)) {
- /* Mask all the interrupts */
- mv_write(MV643XX_ETH_INTERRUPT_MASK_REG(port_num),
- INT_MASK_ALL);
- /* wait for previous write to complete */
- mv_read(MV643XX_ETH_INTERRUPT_MASK_REG(port_num));
- __netif_rx_schedule(dev);
+ if (mii_link_ok(&mp->mii)) {
+ mii_ethtool_gset(&mp->mii, &cmd);
+ mv643xx_eth_update_pscr(dev, &cmd);
+ mv643xx_eth_port_enable_tx(port_num,
+ ETH_TX_QUEUES_ENABLED);
+ if (!netif_carrier_ok(dev)) {
+ netif_carrier_on(dev);
+ if (mp->tx_ring_size - mp->tx_desc_count >=
+ MAX_DESCS_PER_SKB)
+ netif_wake_queue(dev);
+ }
+ } else if (netif_carrier_ok(dev)) {
+ netif_stop_queue(dev);
+ netif_carrier_off(dev);
}
-#else
- if (eth_int_cause & (BIT2 | BIT11))
- mv643xx_eth_receive_queue(dev, 0);
+ }
- /*
- * After forwarded received packets to upper layer, add a task
- * in an interrupts enabled context that refills the RX ring
- * with skb's.
- */
-#ifdef MV643XX_RX_QUEUE_FILL_ON_TASK
- /* Mask all interrupts on ethernet port */
+#ifdef MV643XX_NAPI
+ if (eth_int_cause & ETH_INT_CAUSE_RX) {
+ /* schedule the NAPI poll routine to maintain port */
mv_write(MV643XX_ETH_INTERRUPT_MASK_REG(port_num),
- INT_MASK_ALL);
- /* wait for previous write to take effect */
+ ETH_INT_MASK_ALL);
+ /* wait for previous write to complete */
mv_read(MV643XX_ETH_INTERRUPT_MASK_REG(port_num));
- queue_task(&mp->rx_task, &tq_immediate);
- mark_bh(IMMEDIATE_BH);
+ netif_rx_schedule(dev);
+ }
#else
- mp->rx_task.func(dev);
+ if (eth_int_cause & ETH_INT_CAUSE_RX)
+ mv643xx_eth_receive_queue(dev, INT_MAX);
+ if (eth_int_cause_ext & ETH_INT_CAUSE_TX)
+ mv643xx_eth_free_completed_tx_descs(dev);
#endif
-#endif
- }
- /* PHY status changed */
- if (eth_int_cause_ext & (BIT16 | BIT20)) {
- if (eth_port_link_is_up(port_num)) {
- netif_carrier_on(dev);
- netif_wake_queue(dev);
- /* Start TX queue */
- mv_write(MV643XX_ETH_TRANSMIT_QUEUE_COMMAND_REG
- (port_num), 1);
- } else {
- netif_carrier_off(dev);
- netif_stop_queue(dev);
- }
- }
/*
* If no real interrupt occured, exit.
@@ -670,9 +680,6 @@
mp->rx_used_desc_q = 0;
mp->rx_desc_area_size = rx_desc_num * sizeof(struct eth_rx_desc);
-
- /* Add the queue to the list of RX queues of this port */
- mp->port_rx_queue_command |= 1;
}
/*
@@ -712,14 +719,36 @@
mp->tx_curr_desc_q = 0;
mp->tx_used_desc_q = 0;
-#ifdef MV643XX_CHECKSUM_OFFLOAD_TX
- mp->tx_first_desc_q = 0;
-#endif
mp->tx_desc_area_size = tx_desc_num * sizeof(struct eth_tx_desc);
+}
- /* Add the queue to the list of Tx queues of this port */
- mp->port_tx_queue_command |= 1;
+static int mv643xx_set_settings(struct net_device *dev, struct ethtool_cmd *cmd)
+{
+ struct mv643xx_private *mp = netdev_priv(dev);
+ int err;
+
+ spin_lock_irq(&mp->lock);
+ err = mii_ethtool_sset(&mp->mii, cmd);
+ spin_unlock_irq(&mp->lock);
+
+ return err;
+}
+
+static int mv643xx_get_settings(struct net_device *dev, struct ethtool_cmd *cmd)
+{
+ struct mv643xx_private *mp = netdev_priv(dev);
+ int err;
+
+ spin_lock_irq(&mp->lock);
+ err = mii_ethtool_gset(&mp->mii, cmd);
+ spin_unlock_irq(&mp->lock);
+
+ /* The PHY may support 1000baseT_Half, but the mv643xx does not */
+ cmd->supported &= ~SUPPORTED_1000baseT_Half;
+ cmd->advertising &= ~ADVERTISED_1000baseT_Half;
+
+ return err;
}
/*
@@ -750,23 +779,12 @@
return -EAGAIN;
}
- /* Stop RX Queues */
- mv_write(MV643XX_ETH_RECEIVE_QUEUE_COMMAND_REG(port_num), 0x0000ff00);
-
- /* Set the MAC Address */
- memcpy(mp->port_mac_addr, dev->dev_addr, 6);
-
eth_port_init(mp);
- INIT_WORK(&mp->rx_task, (void (*)(void *))mv643xx_eth_rx_task, dev);
-
memset(&mp->timeout, 0, sizeof(struct timer_list));
- mp->timeout.function = mv643xx_eth_rx_task_timer_wrapper;
+ mp->timeout.function = mv643xx_eth_rx_refill_descs_timer_wrapper;
mp->timeout.data = (unsigned long)dev;
- mp->rx_task_busy = 0;
- mp->rx_timer_flag = 0;
-
/* Allocate RX and TX skb rings */
mp->rx_skb = kmalloc(sizeof(*mp->rx_skb) * mp->rx_ring_size,
GFP_KERNEL);
@@ -784,7 +802,7 @@
}
/* Allocate TX ring */
- mp->tx_ring_skbs = 0;
+ mp->tx_desc_count = 0;
size = mp->tx_ring_size * sizeof(struct eth_tx_desc);
mp->tx_desc_area_size = size;
@@ -809,7 +827,7 @@
ether_init_tx_desc_ring(mp);
/* Allocate RX ring */
- mp->rx_ring_skbs = 0;
+ mp->rx_desc_count = 0;
size = mp->rx_ring_size * sizeof(struct eth_rx_desc);
mp->rx_desc_area_size = size;
@@ -839,9 +857,13 @@
ether_init_rx_desc_ring(mp);
- mv643xx_eth_rx_task(dev); /* Fill RX ring with skb's */
+ mv643xx_eth_rx_refill_descs(dev); /* Fill RX ring with skb's */
- eth_port_start(mp);
+ /* Clear any pending ethernet port interrupts */
+ mv_write(MV643XX_ETH_INTERRUPT_CAUSE_REG(port_num), 0);
+ mv_write(MV643XX_ETH_INTERRUPT_CAUSE_EXTEND_REG(port_num), 0);
+
+ eth_port_start(dev);
/* Interrupt Coalescing */
@@ -853,16 +875,13 @@
mp->tx_int_coal =
eth_port_set_tx_coal(port_num, 133000000, MV643XX_TX_COAL);
- /* Clear any pending ethernet port interrupts */
- mv_write(MV643XX_ETH_INTERRUPT_CAUSE_REG(port_num), 0);
- mv_write(MV643XX_ETH_INTERRUPT_CAUSE_EXTEND_REG(port_num), 0);
-
/* Unmask phy and link status changes interrupts */
mv_write(MV643XX_ETH_INTERRUPT_EXTEND_MASK_REG(port_num),
- INT_UNMASK_ALL_EXT);
+ ETH_INT_UNMASK_ALL_EXT);
/* Unmask RX buffer and TX end interrupt */
- mv_write(MV643XX_ETH_INTERRUPT_MASK_REG(port_num), INT_UNMASK_ALL);
+ mv_write(MV643XX_ETH_INTERRUPT_MASK_REG(port_num), ETH_INT_UNMASK_ALL);
+
return 0;
out_free_tx_skb:
@@ -878,25 +897,14 @@
static void mv643xx_eth_free_tx_rings(struct net_device *dev)
{
struct mv643xx_private *mp = netdev_priv(dev);
- unsigned int port_num = mp->port_num;
- unsigned int curr;
- struct sk_buff *skb;
/* Stop Tx Queues */
- mv_write(MV643XX_ETH_TRANSMIT_QUEUE_COMMAND_REG(port_num), 0x0000ff00);
+ mv643xx_eth_port_disable_tx(mp->port_num);
- /* Free outstanding skb's on TX rings */
- for (curr = 0; mp->tx_ring_skbs && curr < mp->tx_ring_size; curr++) {
- skb = mp->tx_skb[curr];
- if (skb) {
- mp->tx_ring_skbs -= skb_shinfo(skb)->nr_frags;
- dev_kfree_skb(skb);
- mp->tx_ring_skbs--;
- }
- }
- if (mp->tx_ring_skbs)
- printk("%s: Error on Tx descriptor free - could not free %d"
- " descriptors\n", dev->name, mp->tx_ring_skbs);
+ /* Free outstanding skb's on TX ring */
+ mv643xx_eth_free_all_tx_descs(dev);
+
+ BUG_ON(mp->tx_used_desc_q != mp->tx_curr_desc_q);
/* Free TX ring */
if (mp->tx_sram_size)
@@ -913,21 +921,21 @@
int curr;
/* Stop RX Queues */
- mv_write(MV643XX_ETH_RECEIVE_QUEUE_COMMAND_REG(port_num), 0x0000ff00);
+ mv643xx_eth_port_disable_rx(port_num);
/* Free preallocated skb's on RX rings */
- for (curr = 0; mp->rx_ring_skbs && curr < mp->rx_ring_size; curr++) {
+ for (curr = 0; mp->rx_desc_count && curr < mp->rx_ring_size; curr++) {
if (mp->rx_skb[curr]) {
dev_kfree_skb(mp->rx_skb[curr]);
- mp->rx_ring_skbs--;
+ mp->rx_desc_count--;
}
}
- if (mp->rx_ring_skbs)
+ if (mp->rx_desc_count)
printk(KERN_ERR
"%s: Error in freeing Rx Ring. %d skb's still"
" stuck in RX Ring - ignoring them\n", dev->name,
- mp->rx_ring_skbs);
+ mp->rx_desc_count);
/* Free RX ring */
if (mp->rx_sram_size)
iounmap(mp->p_rx_desc_area);
@@ -952,7 +960,7 @@
unsigned int port_num = mp->port_num;
/* Mask all interrupts on ethernet port */
- mv_write(MV643XX_ETH_INTERRUPT_MASK_REG(port_num), INT_MASK_ALL);
+ mv_write(MV643XX_ETH_INTERRUPT_MASK_REG(port_num), ETH_INT_MASK_ALL);
/* wait for previous write to complete */
mv_read(MV643XX_ETH_INTERRUPT_MASK_REG(port_num));
@@ -977,30 +985,6 @@
}
#ifdef MV643XX_NAPI
-static void mv643xx_tx(struct net_device *dev)
-{
- struct mv643xx_private *mp = netdev_priv(dev);
- struct pkt_info pkt_info;
-
- while (eth_tx_return_desc(mp, &pkt_info) == ETH_OK) {
- if (pkt_info.cmd_sts & ETH_TX_FIRST_DESC)
- dma_unmap_single(NULL, pkt_info.buf_ptr,
- pkt_info.byte_cnt,
- DMA_TO_DEVICE);
- else
- dma_unmap_page(NULL, pkt_info.buf_ptr,
- pkt_info.byte_cnt,
- DMA_TO_DEVICE);
-
- if (pkt_info.return_info)
- dev_kfree_skb_irq(pkt_info.return_info);
- }
-
- if (netif_queue_stopped(dev) &&
- mp->tx_ring_size > mp->tx_ring_skbs + MAX_DESCS_PER_SKB)
- netif_wake_queue(dev);
-}
-
/*
* mv643xx_poll
*
@@ -1014,7 +998,7 @@
#ifdef MV643XX_TX_FAST_REFILL
if (++mp->tx_clean_threshold > 5) {
- mv643xx_tx(dev);
+ mv643xx_eth_free_completed_tx_descs(dev);
mp->tx_clean_threshold = 0;
}
#endif
@@ -1025,7 +1009,6 @@
if (orig_budget > dev->quota)
orig_budget = dev->quota;
work_done = mv643xx_eth_receive_queue(dev, orig_budget);
- mp->rx_task.func(dev);
*budget -= work_done;
dev->quota -= work_done;
if (work_done >= orig_budget)
@@ -1037,14 +1020,17 @@
mv_write(MV643XX_ETH_INTERRUPT_CAUSE_REG(port_num), 0);
mv_write(MV643XX_ETH_INTERRUPT_CAUSE_EXTEND_REG(port_num), 0);
mv_write(MV643XX_ETH_INTERRUPT_MASK_REG(port_num),
- INT_UNMASK_ALL);
+ ETH_INT_UNMASK_ALL);
}
return done ? 0 : 1;
}
#endif
-/* Hardware can't handle unaligned fragments smaller than 9 bytes.
+/**
+ * has_tiny_unaligned_frags - check if skb has any small, unaligned fragments
+ *
+ * Hardware can't handle unaligned fragments smaller than 9 bytes.
* This helper function detects that case.
*/
@@ -1061,51 +1047,147 @@
return 0;
}
+/**
+ * eth_alloc_tx_desc_index - return the index of the next available tx desc
+ */
+static int eth_alloc_tx_desc_index(struct mv643xx_private *mp)
+{
+ int tx_desc_curr;
-/*
- * mv643xx_eth_start_xmit
+ BUG_ON(mp->tx_desc_count >= mp->tx_ring_size);
+
+ tx_desc_curr = mp->tx_curr_desc_q;
+ mp->tx_curr_desc_q = (tx_desc_curr + 1) % mp->tx_ring_size;
+
+ BUG_ON(mp->tx_curr_desc_q == mp->tx_used_desc_q);
+
+ return tx_desc_curr;
+}
+
+/**
+ * eth_tx_fill_frag_descs - fill tx hw descriptors for an skb's fragments.
*
- * This function is queues a packet in the Tx descriptor for
- * required port.
+ * Ensure the data for each fragment to be transmitted is mapped properly,
+ * then fill in descriptors in the tx hw queue.
+ */
+static void eth_tx_fill_frag_descs(struct mv643xx_private *mp,
+ struct sk_buff *skb)
+{
+ int frag;
+ int tx_index;
+ struct eth_tx_desc *desc;
+
+ for (frag = 0; frag < skb_shinfo(skb)->nr_frags; frag++) {
+ skb_frag_t *this_frag = &skb_shinfo(skb)->frags[frag];
+
+ tx_index = eth_alloc_tx_desc_index(mp);
+ desc = &mp->p_tx_desc_area[tx_index];
+
+ desc->cmd_sts = ETH_BUFFER_OWNED_BY_DMA;
+ /* Last Frag enables interrupt and frees the skb */
+ if (frag == (skb_shinfo(skb)->nr_frags - 1)) {
+ desc->cmd_sts |= ETH_ZERO_PADDING |
+ ETH_TX_LAST_DESC |
+ ETH_TX_ENABLE_INTERRUPT;
+ mp->tx_skb[tx_index] = skb;
+ } else
+ mp->tx_skb[tx_index] = 0;
+
+ desc = &mp->p_tx_desc_area[tx_index];
+ desc->l4i_chk = 0;
+ desc->byte_cnt = this_frag->size;
+ desc->buf_ptr = dma_map_page(NULL, this_frag->page,
+ this_frag->page_offset,
+ this_frag->size,
+ DMA_TO_DEVICE);
+ }
+}
+
+/**
+ * eth_tx_submit_descs_for_skb - submit data from an skb to the tx hw
*
- * Input : skb - a pointer to socket buffer
- * dev - a pointer to the required port
+ * Ensure the data for an skb to be transmitted is mapped properly,
+ * then fill in descriptors in the tx hw queue and start the hardware.
+ */
+static void eth_tx_submit_descs_for_skb(struct mv643xx_private *mp,
+ struct sk_buff *skb)
+{
+ int tx_index;
+ struct eth_tx_desc *desc;
+ u32 cmd_sts;
+ int length;
+ int nr_frags = skb_shinfo(skb)->nr_frags;
+
+ cmd_sts = ETH_TX_FIRST_DESC | ETH_GEN_CRC | ETH_BUFFER_OWNED_BY_DMA;
+
+ tx_index = eth_alloc_tx_desc_index(mp);
+ desc = &mp->p_tx_desc_area[tx_index];
+
+ if (nr_frags) {
+ eth_tx_fill_frag_descs(mp, skb);
+
+ length = skb_headlen(skb);
+ mp->tx_skb[tx_index] = 0;
+ } else {
+ cmd_sts |= ETH_ZERO_PADDING |
+ ETH_TX_LAST_DESC |
+ ETH_TX_ENABLE_INTERRUPT;
+ length = skb->len;
+ mp->tx_skb[tx_index] = skb;
+ }
+
+ desc->byte_cnt = length;
+ desc->buf_ptr = dma_map_single(NULL, skb->data, length, DMA_TO_DEVICE);
+
+ if (skb->ip_summed == CHECKSUM_HW) {
+ BUG_ON(skb->protocol != ETH_P_IP);
+
+ cmd_sts |= ETH_GEN_TCP_UDP_CHECKSUM |
+ ETH_GEN_IP_V_4_CHECKSUM |
+ skb->nh.iph->ihl << ETH_TX_IHL_SHIFT;
+
+ switch (skb->nh.iph->protocol) {
+ case IPPROTO_UDP:
+ cmd_sts |= ETH_UDP_FRAME;
+ desc->l4i_chk = skb->h.uh->check;
+ break;
+ case IPPROTO_TCP:
+ desc->l4i_chk = skb->h.th->check;
+ break;
+ default:
+ BUG();
+ }
+ } else {
+ /* Errata BTS #50, IHL must be 5 if no HW checksum */
+ cmd_sts |= 5 << ETH_TX_IHL_SHIFT;
+ desc->l4i_chk = 0;
+ }
+
+ /* ensure all other descriptors are written before first cmd_sts */
+ wmb();
+ desc->cmd_sts = cmd_sts;
+
+ /* ensure all descriptors are written before poking hardware */
+ wmb();
+ mv643xx_eth_port_enable_tx(mp->port_num, ETH_TX_QUEUES_ENABLED);
+
+ mp->tx_desc_count += nr_frags + 1;
+}
+
+/**
+ * mv643xx_eth_start_xmit - queue an skb to the hardware for transmission
*
- * Output : zero upon success
*/
static int mv643xx_eth_start_xmit(struct sk_buff *skb, struct net_device *dev)
{
struct mv643xx_private *mp = netdev_priv(dev);
struct net_device_stats *stats = &mp->stats;
- ETH_FUNC_RET_STATUS status;
unsigned long flags;
- struct pkt_info pkt_info;
- if (netif_queue_stopped(dev)) {
- printk(KERN_ERR
- "%s: Tried sending packet when interface is stopped\n",
- dev->name);
- return 1;
- }
+ BUG_ON(netif_queue_stopped(dev));
+ BUG_ON(skb == NULL);
+ BUG_ON(mp->tx_ring_size - mp->tx_desc_count < MAX_DESCS_PER_SKB);
- /* This is a hard error, log it. */
- if ((mp->tx_ring_size - mp->tx_ring_skbs) <=
- (skb_shinfo(skb)->nr_frags + 1)) {
- netif_stop_queue(dev);
- printk(KERN_ERR
- "%s: Bug in mv643xx_eth - Trying to transmit when"
- " queue full !\n", dev->name);
- return 1;
- }
-
- /* Paranoid check - this shouldn't happen */
- if (skb == NULL) {
- stats->tx_dropped++;
- printk(KERN_ERR "mv64320_eth paranoid check failed\n");
- return 1;
- }
-
-#ifdef MV643XX_CHECKSUM_OFFLOAD_TX
if (has_tiny_unaligned_frags(skb)) {
if ((skb_linearize(skb, GFP_ATOMIC) != 0)) {
stats->tx_dropped++;
@@ -1117,167 +1199,14 @@
spin_lock_irqsave(&mp->lock, flags);
- if (!skb_shinfo(skb)->nr_frags) {
- if (skb->ip_summed != CHECKSUM_HW) {
- /* Errata BTS #50, IHL must be 5 if no HW checksum */
- pkt_info.cmd_sts = ETH_TX_ENABLE_INTERRUPT |
- ETH_TX_FIRST_DESC |
- ETH_TX_LAST_DESC |
- 5 << ETH_TX_IHL_SHIFT;
- pkt_info.l4i_chk = 0;
- } else {
- pkt_info.cmd_sts = ETH_TX_ENABLE_INTERRUPT |
- ETH_TX_FIRST_DESC |
- ETH_TX_LAST_DESC |
- ETH_GEN_TCP_UDP_CHECKSUM |
- ETH_GEN_IP_V_4_CHECKSUM |
- skb->nh.iph->ihl << ETH_TX_IHL_SHIFT;
- /* CPU already calculated pseudo header checksum. */
- if ((skb->protocol == ETH_P_IP) &&
- (skb->nh.iph->protocol == IPPROTO_UDP) ) {
- pkt_info.cmd_sts |= ETH_UDP_FRAME;
- pkt_info.l4i_chk = skb->h.uh->check;
- } else if ((skb->protocol == ETH_P_IP) &&
- (skb->nh.iph->protocol == IPPROTO_TCP))
- pkt_info.l4i_chk = skb->h.th->check;
- else {
- printk(KERN_ERR
- "%s: chksum proto != IPv4 TCP or UDP\n",
- dev->name);
- spin_unlock_irqrestore(&mp->lock, flags);
- return 1;
- }
- }
- pkt_info.byte_cnt = skb->len;
- pkt_info.buf_ptr = dma_map_single(NULL, skb->data, skb->len,
- DMA_TO_DEVICE);
- pkt_info.return_info = skb;
- status = eth_port_send(mp, &pkt_info);
- if ((status == ETH_ERROR) || (status == ETH_QUEUE_FULL))
- printk(KERN_ERR "%s: Error on transmitting packet\n",
- dev->name);
- stats->tx_bytes += pkt_info.byte_cnt;
- } else {
- unsigned int frag;
-
- /* first frag which is skb header */
- pkt_info.byte_cnt = skb_headlen(skb);
- pkt_info.buf_ptr = dma_map_single(NULL, skb->data,
- skb_headlen(skb),
- DMA_TO_DEVICE);
- pkt_info.l4i_chk = 0;
- pkt_info.return_info = 0;
-
- if (skb->ip_summed != CHECKSUM_HW)
- /* Errata BTS #50, IHL must be 5 if no HW checksum */
- pkt_info.cmd_sts = ETH_TX_FIRST_DESC |
- 5 << ETH_TX_IHL_SHIFT;
- else {
- pkt_info.cmd_sts = ETH_TX_FIRST_DESC |
- ETH_GEN_TCP_UDP_CHECKSUM |
- ETH_GEN_IP_V_4_CHECKSUM |
- skb->nh.iph->ihl << ETH_TX_IHL_SHIFT;
- /* CPU already calculated pseudo header checksum. */
- if ((skb->protocol == ETH_P_IP) &&
- (skb->nh.iph->protocol == IPPROTO_UDP)) {
- pkt_info.cmd_sts |= ETH_UDP_FRAME;
- pkt_info.l4i_chk = skb->h.uh->check;
- } else if ((skb->protocol == ETH_P_IP) &&
- (skb->nh.iph->protocol == IPPROTO_TCP))
- pkt_info.l4i_chk = skb->h.th->check;
- else {
- printk(KERN_ERR
- "%s: chksum proto != IPv4 TCP or UDP\n",
- dev->name);
- spin_unlock_irqrestore(&mp->lock, flags);
- return 1;
- }
- }
-
- status = eth_port_send(mp, &pkt_info);
- if (status != ETH_OK) {
- if ((status == ETH_ERROR))
- printk(KERN_ERR
- "%s: Error on transmitting packet\n",
- dev->name);
- if (status == ETH_QUEUE_FULL)
- printk("Error on Queue Full \n");
- if (status == ETH_QUEUE_LAST_RESOURCE)
- printk("Tx resource error \n");
- }
- stats->tx_bytes += pkt_info.byte_cnt;
-
- /* Check for the remaining frags */
- for (frag = 0; frag < skb_shinfo(skb)->nr_frags; frag++) {
- skb_frag_t *this_frag = &skb_shinfo(skb)->frags[frag];
- pkt_info.l4i_chk = 0x0000;
- pkt_info.cmd_sts = 0x00000000;
-
- /* Last Frag enables interrupt and frees the skb */
- if (frag == (skb_shinfo(skb)->nr_frags - 1)) {
- pkt_info.cmd_sts |= ETH_TX_ENABLE_INTERRUPT |
- ETH_TX_LAST_DESC;
- pkt_info.return_info = skb;
- } else {
- pkt_info.return_info = 0;
- }
- pkt_info.l4i_chk = 0;
- pkt_info.byte_cnt = this_frag->size;
-
- pkt_info.buf_ptr = dma_map_page(NULL, this_frag->page,
- this_frag->page_offset,
- this_frag->size,
- DMA_TO_DEVICE);
-
- status = eth_port_send(mp, &pkt_info);
-
- if (status != ETH_OK) {
- if ((status == ETH_ERROR))
- printk(KERN_ERR "%s: Error on "
- "transmitting packet\n",
- dev->name);
-
- if (status == ETH_QUEUE_LAST_RESOURCE)
- printk("Tx resource error \n");
-
- if (status == ETH_QUEUE_FULL)
- printk("Queue is full \n");
- }
- stats->tx_bytes += pkt_info.byte_cnt;
- }
- }
-#else
- spin_lock_irqsave(&mp->lock, flags);
-
- pkt_info.cmd_sts = ETH_TX_ENABLE_INTERRUPT | ETH_TX_FIRST_DESC |
- ETH_TX_LAST_DESC;
- pkt_info.l4i_chk = 0;
- pkt_info.byte_cnt = skb->len;
- pkt_info.buf_ptr = dma_map_single(NULL, skb->data, skb->len,
- DMA_TO_DEVICE);
- pkt_info.return_info = skb;
- status = eth_port_send(mp, &pkt_info);
- if ((status == ETH_ERROR) || (status == ETH_QUEUE_FULL))
- printk(KERN_ERR "%s: Error on transmitting packet\n",
- dev->name);
- stats->tx_bytes += pkt_info.byte_cnt;
-#endif
-
- /* Check if TX queue can handle another skb. If not, then
- * signal higher layers to stop requesting TX
- */
- if (mp->tx_ring_size <= (mp->tx_ring_skbs + MAX_DESCS_PER_SKB))
- /*
- * Stop getting skb's from upper layers.
- * Getting skb's from upper layers will be enabled again after
- * packets are released.
- */
- netif_stop_queue(dev);
-
- /* Update statistics and start of transmittion time */
+ eth_tx_submit_descs_for_skb(mp, skb);
+ stats->tx_bytes = skb->len;
stats->tx_packets++;
dev->trans_start = jiffies;
+ if (mp->tx_ring_size - mp->tx_desc_count < MAX_DESCS_PER_SKB)
+ netif_stop_queue(dev);
+
spin_unlock_irqrestore(&mp->lock, flags);
return 0; /* success */
@@ -1306,16 +1235,45 @@
struct mv643xx_private *mp = netdev_priv(netdev);
int port_num = mp->port_num;
- mv_write(MV643XX_ETH_INTERRUPT_MASK_REG(port_num), INT_MASK_ALL);
+ mv_write(MV643XX_ETH_INTERRUPT_MASK_REG(port_num), ETH_INT_MASK_ALL);
/* wait for previous write to complete */
mv_read(MV643XX_ETH_INTERRUPT_MASK_REG(port_num));
mv643xx_eth_int_handler(netdev->irq, netdev, NULL);
- mv_write(MV643XX_ETH_INTERRUPT_MASK_REG(port_num), INT_UNMASK_ALL);
+ mv_write(MV643XX_ETH_INTERRUPT_MASK_REG(port_num), ETH_INT_UNMASK_ALL);
}
#endif
+static void mv643xx_init_ethtool_cmd(struct net_device *dev, int phy_address,
+ int speed, int duplex,
+ struct ethtool_cmd *cmd)
+{
+ struct mv643xx_private *mp = netdev_priv(dev);
+
+ memset(cmd, 0, sizeof(*cmd));
+
+ cmd->port = PORT_MII;
+ cmd->transceiver = XCVR_INTERNAL;
+ cmd->phy_address = phy_address;
+
+ if (speed == 0) {
+ cmd->autoneg = AUTONEG_ENABLE;
+ /* mii lib checks, but doesn't use speed on AUTONEG_ENABLE */
+ cmd->speed = SPEED_100;
+ cmd->advertising = ADVERTISED_10baseT_Half |
+ ADVERTISED_10baseT_Full |
+ ADVERTISED_100baseT_Half |
+ ADVERTISED_100baseT_Full;
+ if (mp->mii.supports_gmii)
+ cmd->advertising |= ADVERTISED_1000baseT_Full;
+ } else {
+ cmd->autoneg = AUTONEG_DISABLE;
+ cmd->speed = speed;
+ cmd->duplex = duplex;
+ }
+}
+
/*/
* mv643xx_eth_probe
*
@@ -1336,6 +1294,9 @@
u8 *p;
struct resource *res;
int err;
+ struct ethtool_cmd cmd;
+ int duplex = DUPLEX_HALF;
+ int speed = 0; /* default to auto-negotiation */
dev = alloc_etherdev(sizeof(struct mv643xx_private));
if (!dev)
@@ -1373,6 +1334,7 @@
dev->tx_queue_len = mp->tx_ring_size;
dev->base_addr = 0;
dev->change_mtu = mv643xx_eth_change_mtu;
+ dev->do_ioctl = mv643xx_eth_do_ioctl;
SET_ETHTOOL_OPS(dev, &mv643xx_ethtool_ops);
#ifdef MV643XX_CHECKSUM_OFFLOAD_TX
@@ -1393,33 +1355,17 @@
/* set default config values */
eth_port_uc_addr_get(dev, dev->dev_addr);
- mp->port_config = MV643XX_ETH_PORT_CONFIG_DEFAULT_VALUE;
- mp->port_config_extend = MV643XX_ETH_PORT_CONFIG_EXTEND_DEFAULT_VALUE;
- mp->port_sdma_config = MV643XX_ETH_PORT_SDMA_CONFIG_DEFAULT_VALUE;
- mp->port_serial_control = MV643XX_ETH_PORT_SERIAL_CONTROL_DEFAULT_VALUE;
mp->rx_ring_size = MV643XX_ETH_PORT_DEFAULT_RECEIVE_QUEUE_SIZE;
mp->tx_ring_size = MV643XX_ETH_PORT_DEFAULT_TRANSMIT_QUEUE_SIZE;
pd = pdev->dev.platform_data;
if (pd) {
- if (pd->mac_addr != NULL)
+ if (pd->mac_addr)
memcpy(dev->dev_addr, pd->mac_addr, 6);
if (pd->phy_addr || pd->force_phy_addr)
ethernet_phy_set(port_num, pd->phy_addr);
- if (pd->port_config || pd->force_port_config)
- mp->port_config = pd->port_config;
-
- if (pd->port_config_extend || pd->force_port_config_extend)
- mp->port_config_extend = pd->port_config_extend;
-
- if (pd->port_sdma_config || pd->force_port_sdma_config)
- mp->port_sdma_config = pd->port_sdma_config;
-
- if (pd->port_serial_control || pd->force_port_serial_control)
- mp->port_serial_control = pd->port_serial_control;
-
if (pd->rx_queue_size)
mp->rx_ring_size = pd->rx_queue_size;
@@ -1435,16 +1381,33 @@
mp->rx_sram_size = pd->rx_sram_size;
mp->rx_sram_addr = pd->rx_sram_addr;
}
+
+ duplex = pd->duplex;
+ speed = pd->speed;
}
+ /* Hook up MII support for ethtool */
+ mp->mii.dev = dev;
+ mp->mii.mdio_read = mv643xx_mdio_read;
+ mp->mii.mdio_write = mv643xx_mdio_write;
+ mp->mii.phy_id = ethernet_phy_get(port_num);
+ mp->mii.phy_id_mask = 0x3f;
+ mp->mii.reg_num_mask = 0x1f;
+
err = ethernet_phy_detect(port_num);
if (err) {
pr_debug("MV643xx ethernet port %d: "
"No PHY detected at addr %d\n",
port_num, ethernet_phy_get(port_num));
- return err;
+ goto out;
}
+ ethernet_phy_reset(port_num);
+ mp->mii.supports_gmii = mii_check_gmii_support(&mp->mii);
+ mv643xx_init_ethtool_cmd(dev, mp->mii.phy_id, speed, duplex, &cmd);
+ mv643xx_eth_update_pscr(dev, &cmd);
+ mv643xx_set_settings(dev, &cmd);
+
err = register_netdev(dev);
if (err)
goto out;
@@ -1689,26 +1652,9 @@
* to the Rx descriptor ring to enable the reuse of this source.
* Return Rx resource is done using the eth_rx_return_buff API.
*
- * Transmit operation:
- * The eth_port_send API supports Scatter-Gather which enables to
- * send a packet spanned over multiple buffers. This means that
- * for each packet info structure given by the user and put into
- * the Tx descriptors ring, will be transmitted only if the 'LAST'
- * bit will be set in the packet info command status field. This
- * API also consider restriction regarding buffer alignments and
- * sizes.
- * The user must return a Tx resource after ensuring the buffer
- * has been transmitted to enable the Tx ring indexes to update.
- *
- * BOARD LAYOUT
- * This device is on-board. No jumper diagram is necessary.
- *
- * EXTERNAL INTERFACE
- *
* Prior to calling the initialization routine eth_port_init() the user
* must set the following fields under mv643xx_private struct:
* port_num User Ethernet port number.
- * port_mac_addr[6] User defined port MAC address.
* port_config User port configuration value.
* port_config_extend User port config extend value.
* port_sdma_config User port SDMA config value.
@@ -1725,20 +1671,12 @@
* return_info Tx/Rx user resource return information.
*/
-/* defines */
-/* SDMA command macros */
-#define ETH_ENABLE_TX_QUEUE(eth_port) \
- mv_write(MV643XX_ETH_TRANSMIT_QUEUE_COMMAND_REG(eth_port), 1)
-
-/* locals */
-
/* PHY routines */
static int ethernet_phy_get(unsigned int eth_port_num);
static void ethernet_phy_set(unsigned int eth_port_num, int phy_addr);
/* Ethernet Port routines */
-static int eth_port_uc_addr(unsigned int eth_port_num, unsigned char uc_nibble,
- int option);
+static void eth_port_set_filter_table_entry(int table, unsigned char entry);
/*
* eth_port_init - Initialize the Ethernet port driver
@@ -1766,17 +1704,11 @@
*/
static void eth_port_init(struct mv643xx_private *mp)
{
- mp->port_rx_queue_command = 0;
- mp->port_tx_queue_command = 0;
-
mp->rx_resource_err = 0;
- mp->tx_resource_err = 0;
eth_port_reset(mp->port_num);
eth_port_init_mac_tables(mp->port_num);
-
- ethernet_phy_reset(mp->port_num);
}
/*
@@ -1798,7 +1730,7 @@
* and ether_init_rx_desc_ring for Rx queues).
*
* INPUT:
- * struct mv643xx_private *mp Ethernet port control struct
+ * dev - a pointer to the required interface
*
* OUTPUT:
* Ethernet port is ready to receive and transmit.
@@ -1806,10 +1738,13 @@
* RETURN:
* None.
*/
-static void eth_port_start(struct mv643xx_private *mp)
+static void eth_port_start(struct net_device *dev)
{
+ struct mv643xx_private *mp = netdev_priv(dev);
unsigned int port_num = mp->port_num;
int tx_curr_desc, rx_curr_desc;
+ u32 pscr;
+ struct ethtool_cmd ethtool_cmd;
/* Assignment of Tx CTRP of given queue */
tx_curr_desc = mp->tx_curr_desc_q;
@@ -1822,37 +1757,45 @@
(u32)((struct eth_rx_desc *)mp->rx_desc_dma + rx_curr_desc));
/* Add the assigned Ethernet address to the port's address table */
- eth_port_uc_addr_set(port_num, mp->port_mac_addr);
+ eth_port_uc_addr_set(port_num, dev->dev_addr);
/* Assign port configuration and command. */
- mv_write(MV643XX_ETH_PORT_CONFIG_REG(port_num), mp->port_config);
+ mv_write(MV643XX_ETH_PORT_CONFIG_REG(port_num),
+ MV643XX_ETH_PORT_CONFIG_DEFAULT_VALUE);
mv_write(MV643XX_ETH_PORT_CONFIG_EXTEND_REG(port_num),
- mp->port_config_extend);
+ MV643XX_ETH_PORT_CONFIG_EXTEND_DEFAULT_VALUE);
+ pscr = mv_read(MV643XX_ETH_PORT_SERIAL_CONTROL_REG(port_num));
- /* Increase the Rx side buffer size if supporting GigE */
- if (mp->port_serial_control & MV643XX_ETH_SET_GMII_SPEED_TO_1000)
- mv_write(MV643XX_ETH_PORT_SERIAL_CONTROL_REG(port_num),
- (mp->port_serial_control & 0xfff1ffff) | (0x5 << 17));
- else
- mv_write(MV643XX_ETH_PORT_SERIAL_CONTROL_REG(port_num),
- mp->port_serial_control);
+ pscr &= ~(MV643XX_ETH_SERIAL_PORT_ENABLE | MV643XX_ETH_FORCE_LINK_PASS);
+ mv_write(MV643XX_ETH_PORT_SERIAL_CONTROL_REG(port_num), pscr);
- mv_write(MV643XX_ETH_PORT_SERIAL_CONTROL_REG(port_num),
- mv_read(MV643XX_ETH_PORT_SERIAL_CONTROL_REG(port_num)) |
- MV643XX_ETH_SERIAL_PORT_ENABLE);
+ pscr |= MV643XX_ETH_DISABLE_AUTO_NEG_FOR_FLOW_CTRL |
+ MV643XX_ETH_DISABLE_AUTO_NEG_SPEED_GMII |
+ MV643XX_ETH_DISABLE_AUTO_NEG_FOR_DUPLX |
+ MV643XX_ETH_DO_NOT_FORCE_LINK_FAIL |
+ MV643XX_ETH_SERIAL_PORT_CONTROL_RESERVED;
+
+ mv_write(MV643XX_ETH_PORT_SERIAL_CONTROL_REG(port_num), pscr);
+
+ pscr |= MV643XX_ETH_SERIAL_PORT_ENABLE;
+ mv_write(MV643XX_ETH_PORT_SERIAL_CONTROL_REG(port_num), pscr);
/* Assign port SDMA configuration */
mv_write(MV643XX_ETH_SDMA_CONFIG_REG(port_num),
- mp->port_sdma_config);
+ MV643XX_ETH_PORT_SDMA_CONFIG_DEFAULT_VALUE);
/* Enable port Rx. */
- mv_write(MV643XX_ETH_RECEIVE_QUEUE_COMMAND_REG(port_num),
- mp->port_rx_queue_command);
+ mv643xx_eth_port_enable_rx(port_num, ETH_RX_QUEUES_ENABLED);
/* Disable port bandwidth limits by clearing MTU register */
mv_write(MV643XX_ETH_MAXIMUM_TRANSMIT_UNIT(port_num), 0);
+
+ /* save phy settings across reset */
+ mv643xx_get_settings(dev, ðtool_cmd);
+ ethernet_phy_reset(mp->port_num);
+ mv643xx_set_settings(dev, ðtool_cmd);
}
/*
@@ -1866,8 +1809,9 @@
* char * p_addr Address to be set
*
* OUTPUT:
- * Set MAC address low and high registers. also calls eth_port_uc_addr()
- * To set the unicast table with the proper information.
+ * Set MAC address low and high registers. also calls
+ * eth_port_set_filter_table_entry() to set the unicast
+ * table with the proper information.
*
* RETURN:
* N/A.
@@ -1878,6 +1822,7 @@
{
unsigned int mac_h;
unsigned int mac_l;
+ int table;
mac_l = (p_addr[4] << 8) | (p_addr[5]);
mac_h = (p_addr[0] << 24) | (p_addr[1] << 16) | (p_addr[2] << 8) |
@@ -1887,9 +1832,8 @@
mv_write(MV643XX_ETH_MAC_ADDR_HIGH(eth_port_num), mac_h);
/* Accept frames of this address */
- eth_port_uc_addr(eth_port_num, p_addr[5], ACCEPT_MAC_ADDR);
-
- return;
+ table = MV643XX_ETH_DA_FILTER_UNICAST_TABLE_BASE(eth_port_num);
+ eth_port_set_filter_table_entry(table, p_addr[5] & 0x0f);
}
/*
@@ -1928,72 +1872,6 @@
}
/*
- * eth_port_uc_addr - This function Set the port unicast address table
- *
- * DESCRIPTION:
- * This function locates the proper entry in the Unicast table for the
- * specified MAC nibble and sets its properties according to function
- * parameters.
- *
- * INPUT:
- * unsigned int eth_port_num Port number.
- * unsigned char uc_nibble Unicast MAC Address last nibble.
- * int option 0 = Add, 1 = remove address.
- *
- * OUTPUT:
- * This function add/removes MAC addresses from the port unicast address
- * table.
- *
- * RETURN:
- * true is output succeeded.
- * false if option parameter is invalid.
- *
- */
-static int eth_port_uc_addr(unsigned int eth_port_num, unsigned char uc_nibble,
- int option)
-{
- unsigned int unicast_reg;
- unsigned int tbl_offset;
- unsigned int reg_offset;
-
- /* Locate the Unicast table entry */
- uc_nibble = (0xf & uc_nibble);
- tbl_offset = (uc_nibble / 4) * 4; /* Register offset from unicast table base */
- reg_offset = uc_nibble % 4; /* Entry offset within the above register */
-
- switch (option) {
- case REJECT_MAC_ADDR:
- /* Clear accepts frame bit at given unicast DA table entry */
- unicast_reg = mv_read((MV643XX_ETH_DA_FILTER_UNICAST_TABLE_BASE
- (eth_port_num) + tbl_offset));
-
- unicast_reg &= (0x0E << (8 * reg_offset));
-
- mv_write((MV643XX_ETH_DA_FILTER_UNICAST_TABLE_BASE
- (eth_port_num) + tbl_offset), unicast_reg);
- break;
-
- case ACCEPT_MAC_ADDR:
- /* Set accepts frame bit at unicast DA filter table entry */
- unicast_reg =
- mv_read((MV643XX_ETH_DA_FILTER_UNICAST_TABLE_BASE
- (eth_port_num) + tbl_offset));
-
- unicast_reg |= (0x01 << (8 * reg_offset));
-
- mv_write((MV643XX_ETH_DA_FILTER_UNICAST_TABLE_BASE
- (eth_port_num) + tbl_offset), unicast_reg);
-
- break;
-
- default:
- return 0;
- }
-
- return 1;
-}
-
-/*
* The entries in each table are indexed by a hash of a packet's MAC
* address. One bit in each entry determines whether the packet is
* accepted. There are 4 entries (each 8 bits wide) in each register
@@ -2205,8 +2083,8 @@
/* Clear DA filter unicast table (Ex_dFUT) */
for (table_index = 0; table_index <= 0xC; table_index += 4)
- mv_write((MV643XX_ETH_DA_FILTER_UNICAST_TABLE_BASE
- (eth_port_num) + table_index), 0);
+ mv_write(MV643XX_ETH_DA_FILTER_UNICAST_TABLE_BASE
+ (eth_port_num) + table_index, 0);
for (table_index = 0; table_index <= 0xFC; table_index += 4) {
/* Clear DA filter special multicast table (Ex_dFSMT) */
@@ -2389,6 +2267,73 @@
eth_port_read_smi_reg(eth_port_num, 0, &phy_reg_data);
phy_reg_data |= 0x8000; /* Set bit 15 to reset the PHY */
eth_port_write_smi_reg(eth_port_num, 0, phy_reg_data);
+
+ /* wait for PHY to come out of reset */
+ do {
+ udelay(1);
+ eth_port_read_smi_reg(eth_port_num, 0, &phy_reg_data);
+ } while (phy_reg_data & 0x8000);
+}
+
+static void mv643xx_eth_port_enable_tx(unsigned int port_num,
+ unsigned int queues)
+{
+ mv_write(MV643XX_ETH_TRANSMIT_QUEUE_COMMAND_REG(port_num), queues);
+}
+
+static void mv643xx_eth_port_enable_rx(unsigned int port_num,
+ unsigned int queues)
+{
+ mv_write(MV643XX_ETH_RECEIVE_QUEUE_COMMAND_REG(port_num), queues);
+}
+
+static unsigned int mv643xx_eth_port_disable_tx(unsigned int port_num)
+{
+ u32 queues;
+
+ /* Stop Tx port activity. Check port Tx activity. */
+ queues = mv_read(MV643XX_ETH_TRANSMIT_QUEUE_COMMAND_REG(port_num))
+ & 0xFF;
+ if (queues) {
+ /* Issue stop command for active queues only */
+ mv_write(MV643XX_ETH_TRANSMIT_QUEUE_COMMAND_REG(port_num),
+ (queues << 8));
+
+ /* Wait for all Tx activity to terminate. */
+ /* Check port cause register that all Tx queues are stopped */
+ while (mv_read(MV643XX_ETH_TRANSMIT_QUEUE_COMMAND_REG(port_num))
+ & 0xFF)
+ udelay(PHY_WAIT_MICRO_SECONDS);
+
+ /* Wait for Tx FIFO to empty */
+ while (mv_read(MV643XX_ETH_PORT_STATUS_REG(port_num)) &
+ ETH_PORT_TX_FIFO_EMPTY)
+ udelay(PHY_WAIT_MICRO_SECONDS);
+ }
+
+ return queues;
+}
+
+static unsigned int mv643xx_eth_port_disable_rx(unsigned int port_num)
+{
+ u32 queues;
+
+ /* Stop Rx port activity. Check port Rx activity. */
+ queues = mv_read(MV643XX_ETH_RECEIVE_QUEUE_COMMAND_REG(port_num))
+ & 0xFF;
+ if (queues) {
+ /* Issue stop command for active queues only */
+ mv_write(MV643XX_ETH_RECEIVE_QUEUE_COMMAND_REG(port_num),
+ (queues << 8));
+
+ /* Wait for all Rx activity to terminate. */
+ /* Check port cause register that all Rx queues are stopped */
+ while (mv_read(MV643XX_ETH_RECEIVE_QUEUE_COMMAND_REG(port_num))
+ & 0xFF)
+ udelay(PHY_WAIT_MICRO_SECONDS);
+ }
+
+ return queues;
}
/*
@@ -2413,70 +2358,21 @@
{
unsigned int reg_data;
- /* Stop Tx port activity. Check port Tx activity. */
- reg_data = mv_read(MV643XX_ETH_TRANSMIT_QUEUE_COMMAND_REG(port_num));
-
- if (reg_data & 0xFF) {
- /* Issue stop command for active channels only */
- mv_write(MV643XX_ETH_TRANSMIT_QUEUE_COMMAND_REG(port_num),
- (reg_data << 8));
-
- /* Wait for all Tx activity to terminate. */
- /* Check port cause register that all Tx queues are stopped */
- while (mv_read(MV643XX_ETH_TRANSMIT_QUEUE_COMMAND_REG(port_num))
- & 0xFF)
- udelay(10);
- }
-
- /* Stop Rx port activity. Check port Rx activity. */
- reg_data = mv_read(MV643XX_ETH_RECEIVE_QUEUE_COMMAND_REG(port_num));
-
- if (reg_data & 0xFF) {
- /* Issue stop command for active channels only */
- mv_write(MV643XX_ETH_RECEIVE_QUEUE_COMMAND_REG(port_num),
- (reg_data << 8));
-
- /* Wait for all Rx activity to terminate. */
- /* Check port cause register that all Rx queues are stopped */
- while (mv_read(MV643XX_ETH_RECEIVE_QUEUE_COMMAND_REG(port_num))
- & 0xFF)
- udelay(10);
- }
+ mv643xx_eth_port_disable_tx(port_num);
+ mv643xx_eth_port_disable_rx(port_num);
/* Clear all MIB counters */
eth_clear_mib_counters(port_num);
/* Reset the Enable bit in the Configuration Register */
reg_data = mv_read(MV643XX_ETH_PORT_SERIAL_CONTROL_REG(port_num));
- reg_data &= ~MV643XX_ETH_SERIAL_PORT_ENABLE;
+ reg_data &= ~(MV643XX_ETH_SERIAL_PORT_ENABLE |
+ MV643XX_ETH_DO_NOT_FORCE_LINK_FAIL |
+ MV643XX_ETH_FORCE_LINK_PASS);
mv_write(MV643XX_ETH_PORT_SERIAL_CONTROL_REG(port_num), reg_data);
}
-static int eth_port_autoneg_supported(unsigned int eth_port_num)
-{
- unsigned int phy_reg_data0;
-
- eth_port_read_smi_reg(eth_port_num, 0, &phy_reg_data0);
-
- return phy_reg_data0 & 0x1000;
-}
-
-static int eth_port_link_is_up(unsigned int eth_port_num)
-{
- unsigned int phy_reg_data1;
-
- eth_port_read_smi_reg(eth_port_num, 1, &phy_reg_data1);
-
- if (eth_port_autoneg_supported(eth_port_num)) {
- if (phy_reg_data1 & 0x20) /* auto-neg complete */
- return 1;
- } else if (phy_reg_data1 & 0x4) /* link up */
- return 1;
-
- return 0;
-}
-
/*
* eth_port_read_smi_reg - Read PHY registers
*
@@ -2582,250 +2478,21 @@
}
/*
- * eth_port_send - Send an Ethernet packet
- *
- * DESCRIPTION:
- * This routine send a given packet described by p_pktinfo parameter. It
- * supports transmitting of a packet spaned over multiple buffers. The
- * routine updates 'curr' and 'first' indexes according to the packet
- * segment passed to the routine. In case the packet segment is first,
- * the 'first' index is update. In any case, the 'curr' index is updated.
- * If the routine get into Tx resource error it assigns 'curr' index as
- * 'first'. This way the function can abort Tx process of multiple
- * descriptors per packet.
- *
- * INPUT:
- * struct mv643xx_private *mp Ethernet Port Control srtuct.
- * struct pkt_info *p_pkt_info User packet buffer.
- *
- * OUTPUT:
- * Tx ring 'curr' and 'first' indexes are updated.
- *
- * RETURN:
- * ETH_QUEUE_FULL in case of Tx resource error.
- * ETH_ERROR in case the routine can not access Tx desc ring.
- * ETH_QUEUE_LAST_RESOURCE if the routine uses the last Tx resource.
- * ETH_OK otherwise.
- *
+ * Wrappers for MII support library.
*/
-#ifdef MV643XX_CHECKSUM_OFFLOAD_TX
-/*
- * Modified to include the first descriptor pointer in case of SG
- */
-static ETH_FUNC_RET_STATUS eth_port_send(struct mv643xx_private *mp,
- struct pkt_info *p_pkt_info)
+static int mv643xx_mdio_read(struct net_device *dev, int phy_id, int location)
{
- int tx_desc_curr, tx_desc_used, tx_first_desc, tx_next_desc;
- struct eth_tx_desc *current_descriptor;
- struct eth_tx_desc *first_descriptor;
- u32 command;
+ int val;
+ struct mv643xx_private *mp = netdev_priv(dev);
- /* Do not process Tx ring in case of Tx ring resource error */
- if (mp->tx_resource_err)
- return ETH_QUEUE_FULL;
-
- /*
- * The hardware requires that each buffer that is <= 8 bytes
- * in length must be aligned on an 8 byte boundary.
- */
- if (p_pkt_info->byte_cnt <= 8 && p_pkt_info->buf_ptr & 0x7) {
- printk(KERN_ERR
- "mv643xx_eth port %d: packet size <= 8 problem\n",
- mp->port_num);
- return ETH_ERROR;
- }
-
- mp->tx_ring_skbs++;
- BUG_ON(mp->tx_ring_skbs > mp->tx_ring_size);
-
- /* Get the Tx Desc ring indexes */
- tx_desc_curr = mp->tx_curr_desc_q;
- tx_desc_used = mp->tx_used_desc_q;
-
- current_descriptor = &mp->p_tx_desc_area[tx_desc_curr];
-
- tx_next_desc = (tx_desc_curr + 1) % mp->tx_ring_size;
-
- current_descriptor->buf_ptr = p_pkt_info->buf_ptr;
- current_descriptor->byte_cnt = p_pkt_info->byte_cnt;
- current_descriptor->l4i_chk = p_pkt_info->l4i_chk;
- mp->tx_skb[tx_desc_curr] = p_pkt_info->return_info;
-
- command = p_pkt_info->cmd_sts | ETH_ZERO_PADDING | ETH_GEN_CRC |
- ETH_BUFFER_OWNED_BY_DMA;
- if (command & ETH_TX_FIRST_DESC) {
- tx_first_desc = tx_desc_curr;
- mp->tx_first_desc_q = tx_first_desc;
- first_descriptor = current_descriptor;
- mp->tx_first_command = command;
- } else {
- tx_first_desc = mp->tx_first_desc_q;
- first_descriptor = &mp->p_tx_desc_area[tx_first_desc];
- BUG_ON(first_descriptor == NULL);
- current_descriptor->cmd_sts = command;
- }
-
- if (command & ETH_TX_LAST_DESC) {
- wmb();
- first_descriptor->cmd_sts = mp->tx_first_command;
-
- wmb();
- ETH_ENABLE_TX_QUEUE(mp->port_num);
-
- /*
- * Finish Tx packet. Update first desc in case of Tx resource
- * error */
- tx_first_desc = tx_next_desc;
- mp->tx_first_desc_q = tx_first_desc;
- }
-
- /* Check for ring index overlap in the Tx desc ring */
- if (tx_next_desc == tx_desc_used) {
- mp->tx_resource_err = 1;
- mp->tx_curr_desc_q = tx_first_desc;
-
- return ETH_QUEUE_LAST_RESOURCE;
- }
-
- mp->tx_curr_desc_q = tx_next_desc;
-
- return ETH_OK;
+ eth_port_read_smi_reg(mp->port_num, location, &val);
+ return val;
}
-#else
-static ETH_FUNC_RET_STATUS eth_port_send(struct mv643xx_private *mp,
- struct pkt_info *p_pkt_info)
+
+static void mv643xx_mdio_write(struct net_device *dev, int phy_id, int location, int val)
{
- int tx_desc_curr;
- int tx_desc_used;
- struct eth_tx_desc *current_descriptor;
- unsigned int command_status;
-
- /* Do not process Tx ring in case of Tx ring resource error */
- if (mp->tx_resource_err)
- return ETH_QUEUE_FULL;
-
- mp->tx_ring_skbs++;
- BUG_ON(mp->tx_ring_skbs > mp->tx_ring_size);
-
- /* Get the Tx Desc ring indexes */
- tx_desc_curr = mp->tx_curr_desc_q;
- tx_desc_used = mp->tx_used_desc_q;
- current_descriptor = &mp->p_tx_desc_area[tx_desc_curr];
-
- command_status = p_pkt_info->cmd_sts | ETH_ZERO_PADDING | ETH_GEN_CRC;
- current_descriptor->buf_ptr = p_pkt_info->buf_ptr;
- current_descriptor->byte_cnt = p_pkt_info->byte_cnt;
- mp->tx_skb[tx_desc_curr] = p_pkt_info->return_info;
-
- /* Set last desc with DMA ownership and interrupt enable. */
- wmb();
- current_descriptor->cmd_sts = command_status |
- ETH_BUFFER_OWNED_BY_DMA | ETH_TX_ENABLE_INTERRUPT;
-
- wmb();
- ETH_ENABLE_TX_QUEUE(mp->port_num);
-
- /* Finish Tx packet. Update first desc in case of Tx resource error */
- tx_desc_curr = (tx_desc_curr + 1) % mp->tx_ring_size;
-
- /* Update the current descriptor */
- mp->tx_curr_desc_q = tx_desc_curr;
-
- /* Check for ring index overlap in the Tx desc ring */
- if (tx_desc_curr == tx_desc_used) {
- mp->tx_resource_err = 1;
- return ETH_QUEUE_LAST_RESOURCE;
- }
-
- return ETH_OK;
-}
-#endif
-
-/*
- * eth_tx_return_desc - Free all used Tx descriptors
- *
- * DESCRIPTION:
- * This routine returns the transmitted packet information to the caller.
- * It uses the 'first' index to support Tx desc return in case a transmit
- * of a packet spanned over multiple buffer still in process.
- * In case the Tx queue was in "resource error" condition, where there are
- * no available Tx resources, the function resets the resource error flag.
- *
- * INPUT:
- * struct mv643xx_private *mp Ethernet Port Control srtuct.
- * struct pkt_info *p_pkt_info User packet buffer.
- *
- * OUTPUT:
- * Tx ring 'first' and 'used' indexes are updated.
- *
- * RETURN:
- * ETH_OK on success
- * ETH_ERROR otherwise.
- *
- */
-static ETH_FUNC_RET_STATUS eth_tx_return_desc(struct mv643xx_private *mp,
- struct pkt_info *p_pkt_info)
-{
- int tx_desc_used;
- int tx_busy_desc;
- struct eth_tx_desc *p_tx_desc_used;
- unsigned int command_status;
- unsigned long flags;
- int err = ETH_OK;
-
- spin_lock_irqsave(&mp->lock, flags);
-
-#ifdef MV643XX_CHECKSUM_OFFLOAD_TX
- tx_busy_desc = mp->tx_first_desc_q;
-#else
- tx_busy_desc = mp->tx_curr_desc_q;
-#endif
-
- /* Get the Tx Desc ring indexes */
- tx_desc_used = mp->tx_used_desc_q;
-
- p_tx_desc_used = &mp->p_tx_desc_area[tx_desc_used];
-
- /* Sanity check */
- if (p_tx_desc_used == NULL) {
- err = ETH_ERROR;
- goto out;
- }
-
- /* Stop release. About to overlap the current available Tx descriptor */
- if (tx_desc_used == tx_busy_desc && !mp->tx_resource_err) {
- err = ETH_ERROR;
- goto out;
- }
-
- command_status = p_tx_desc_used->cmd_sts;
-
- /* Still transmitting... */
- if (command_status & (ETH_BUFFER_OWNED_BY_DMA)) {
- err = ETH_ERROR;
- goto out;
- }
-
- /* Pass the packet information to the caller */
- p_pkt_info->cmd_sts = command_status;
- p_pkt_info->return_info = mp->tx_skb[tx_desc_used];
- p_pkt_info->buf_ptr = p_tx_desc_used->buf_ptr;
- p_pkt_info->byte_cnt = p_tx_desc_used->byte_cnt;
- mp->tx_skb[tx_desc_used] = NULL;
-
- /* Update the next descriptor to release. */
- mp->tx_used_desc_q = (tx_desc_used + 1) % mp->tx_ring_size;
-
- /* Any Tx return cancels the Tx resource error status */
- mp->tx_resource_err = 0;
-
- BUG_ON(mp->tx_ring_skbs == 0);
- mp->tx_ring_skbs--;
-
-out:
- spin_unlock_irqrestore(&mp->lock, flags);
-
- return err;
+ struct mv643xx_private *mp = netdev_priv(dev);
+ eth_port_write_smi_reg(mp->port_num, location, val);
}
/*
@@ -3017,111 +2684,6 @@
#define MV643XX_STATS_LEN \
sizeof(mv643xx_gstrings_stats) / sizeof(struct mv643xx_stats)
-static int
-mv643xx_get_settings(struct net_device *netdev, struct ethtool_cmd *ecmd)
-{
- struct mv643xx_private *mp = netdev->priv;
- int port_num = mp->port_num;
- int autoneg = eth_port_autoneg_supported(port_num);
- int mode_10_bit;
- int auto_duplex;
- int half_duplex = 0;
- int full_duplex = 0;
- int auto_speed;
- int speed_10 = 0;
- int speed_100 = 0;
- int speed_1000 = 0;
-
- u32 pcs = mv_read(MV643XX_ETH_PORT_SERIAL_CONTROL_REG(port_num));
- u32 psr = mv_read(MV643XX_ETH_PORT_STATUS_REG(port_num));
-
- mode_10_bit = psr & MV643XX_ETH_PORT_STATUS_MODE_10_BIT;
-
- if (mode_10_bit) {
- ecmd->supported = SUPPORTED_10baseT_Half;
- } else {
- ecmd->supported = (SUPPORTED_10baseT_Half |
- SUPPORTED_10baseT_Full |
- SUPPORTED_100baseT_Half |
- SUPPORTED_100baseT_Full |
- SUPPORTED_1000baseT_Full |
- (autoneg ? SUPPORTED_Autoneg : 0) |
- SUPPORTED_TP);
-
- auto_duplex = !(pcs & MV643XX_ETH_DISABLE_AUTO_NEG_FOR_DUPLX);
- auto_speed = !(pcs & MV643XX_ETH_DISABLE_AUTO_NEG_SPEED_GMII);
-
- ecmd->advertising = ADVERTISED_TP;
-
- if (autoneg) {
- ecmd->advertising |= ADVERTISED_Autoneg;
-
- if (auto_duplex) {
- half_duplex = 1;
- full_duplex = 1;
- } else {
- if (pcs & MV643XX_ETH_SET_FULL_DUPLEX_MODE)
- full_duplex = 1;
- else
- half_duplex = 1;
- }
-
- if (auto_speed) {
- speed_10 = 1;
- speed_100 = 1;
- speed_1000 = 1;
- } else {
- if (pcs & MV643XX_ETH_SET_GMII_SPEED_TO_1000)
- speed_1000 = 1;
- else if (pcs & MV643XX_ETH_SET_MII_SPEED_TO_100)
- speed_100 = 1;
- else
- speed_10 = 1;
- }
-
- if (speed_10 & half_duplex)
- ecmd->advertising |= ADVERTISED_10baseT_Half;
- if (speed_10 & full_duplex)
- ecmd->advertising |= ADVERTISED_10baseT_Full;
- if (speed_100 & half_duplex)
- ecmd->advertising |= ADVERTISED_100baseT_Half;
- if (speed_100 & full_duplex)
- ecmd->advertising |= ADVERTISED_100baseT_Full;
- if (speed_1000)
- ecmd->advertising |= ADVERTISED_1000baseT_Full;
- }
- }
-
- ecmd->port = PORT_TP;
- ecmd->phy_address = ethernet_phy_get(port_num);
-
- ecmd->transceiver = XCVR_EXTERNAL;
-
- if (netif_carrier_ok(netdev)) {
- if (mode_10_bit)
- ecmd->speed = SPEED_10;
- else {
- if (psr & MV643XX_ETH_PORT_STATUS_GMII_1000)
- ecmd->speed = SPEED_1000;
- else if (psr & MV643XX_ETH_PORT_STATUS_MII_100)
- ecmd->speed = SPEED_100;
- else
- ecmd->speed = SPEED_10;
- }
-
- if (psr & MV643XX_ETH_PORT_STATUS_FULL_DUPLEX)
- ecmd->duplex = DUPLEX_FULL;
- else
- ecmd->duplex = DUPLEX_HALF;
- } else {
- ecmd->speed = -1;
- ecmd->duplex = -1;
- }
-
- ecmd->autoneg = autoneg ? AUTONEG_ENABLE : AUTONEG_DISABLE;
- return 0;
-}
-
static void mv643xx_get_drvinfo(struct net_device *netdev,
struct ethtool_drvinfo *drvinfo)
{
@@ -3168,15 +2730,41 @@
}
}
+static u32 mv643xx_eth_get_link(struct net_device *dev)
+{
+ struct mv643xx_private *mp = netdev_priv(dev);
+
+ return mii_link_ok(&mp->mii);
+}
+
+static int mv643xx_eth_nway_restart(struct net_device *dev)
+{
+ struct mv643xx_private *mp = netdev_priv(dev);
+
+ return mii_nway_restart(&mp->mii);
+}
+
+static int mv643xx_eth_do_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd)
+{
+ struct mv643xx_private *mp = netdev_priv(dev);
+
+ return generic_mii_ioctl(&mp->mii, if_mii(ifr), cmd, NULL);
+}
+
static struct ethtool_ops mv643xx_ethtool_ops = {
.get_settings = mv643xx_get_settings,
+ .set_settings = mv643xx_set_settings,
.get_drvinfo = mv643xx_get_drvinfo,
- .get_link = ethtool_op_get_link,
+ .get_link = mv643xx_eth_get_link,
.get_sg = ethtool_op_get_sg,
.set_sg = ethtool_op_set_sg,
.get_strings = mv643xx_get_strings,
.get_stats_count = mv643xx_get_stats_count,
.get_ethtool_stats = mv643xx_get_ethtool_stats,
+ .get_strings = mv643xx_get_strings,
+ .get_stats_count = mv643xx_get_stats_count,
+ .get_ethtool_stats = mv643xx_get_ethtool_stats,
+ .nway_reset = mv643xx_eth_nway_restart,
};
/************* End ethtool support *************************/
diff --git a/drivers/net/mv643xx_eth.h b/drivers/net/mv643xx_eth.h
index f769f9b..7754d19 100644
--- a/drivers/net/mv643xx_eth.h
+++ b/drivers/net/mv643xx_eth.h
@@ -5,53 +5,16 @@
#include <linux/kernel.h>
#include <linux/spinlock.h>
#include <linux/workqueue.h>
+#include <linux/mii.h>
#include <linux/mv643xx.h>
-#define BIT0 0x00000001
-#define BIT1 0x00000002
-#define BIT2 0x00000004
-#define BIT3 0x00000008
-#define BIT4 0x00000010
-#define BIT5 0x00000020
-#define BIT6 0x00000040
-#define BIT7 0x00000080
-#define BIT8 0x00000100
-#define BIT9 0x00000200
-#define BIT10 0x00000400
-#define BIT11 0x00000800
-#define BIT12 0x00001000
-#define BIT13 0x00002000
-#define BIT14 0x00004000
-#define BIT15 0x00008000
-#define BIT16 0x00010000
-#define BIT17 0x00020000
-#define BIT18 0x00040000
-#define BIT19 0x00080000
-#define BIT20 0x00100000
-#define BIT21 0x00200000
-#define BIT22 0x00400000
-#define BIT23 0x00800000
-#define BIT24 0x01000000
-#define BIT25 0x02000000
-#define BIT26 0x04000000
-#define BIT27 0x08000000
-#define BIT28 0x10000000
-#define BIT29 0x20000000
-#define BIT30 0x40000000
-#define BIT31 0x80000000
-
-/*
- * The first part is the high level driver of the gigE ethernet ports.
- */
-
/* Checksum offload for Tx works for most packets, but
* fails if previous packet sent did not use hw csum
*/
#define MV643XX_CHECKSUM_OFFLOAD_TX
#define MV643XX_NAPI
#define MV643XX_TX_FAST_REFILL
-#undef MV643XX_RX_QUEUE_FILL_ON_TASK /* Does not work, yet */
#undef MV643XX_COAL
/*
@@ -73,25 +36,40 @@
#define MV643XX_RX_COAL 100
#endif
-/*
- * The second part is the low level driver of the gigE ethernet ports.
- */
+#ifdef MV643XX_CHECKSUM_OFFLOAD_TX
+#define MAX_DESCS_PER_SKB (MAX_SKB_FRAGS + 1)
+#else
+#define MAX_DESCS_PER_SKB 1
+#endif
-/*
- * Header File for : MV-643xx network interface header
- *
- * DESCRIPTION:
- * This header file contains macros typedefs and function declaration for
- * the Marvell Gig Bit Ethernet Controller.
- *
- * DEPENDENCIES:
- * None.
- *
- */
+#define ETH_VLAN_HLEN 4
+#define ETH_FCS_LEN 4
+#define ETH_DMA_ALIGN 8 /* hw requires 8-byte alignment */
+#define ETH_HW_IP_ALIGN 2 /* hw aligns IP header */
+#define ETH_WRAPPER_LEN (ETH_HW_IP_ALIGN + ETH_HLEN + \
+ ETH_VLAN_HLEN + ETH_FCS_LEN)
+#define ETH_RX_SKB_SIZE ((dev->mtu + ETH_WRAPPER_LEN + 7) & ~0x7)
-/* MAC accepet/reject macros */
-#define ACCEPT_MAC_ADDR 0
-#define REJECT_MAC_ADDR 1
+#define ETH_RX_QUEUES_ENABLED (1 << 0) /* use only Q0 for receive */
+#define ETH_TX_QUEUES_ENABLED (1 << 0) /* use only Q0 for transmit */
+
+#define ETH_INT_CAUSE_RX_DONE (ETH_RX_QUEUES_ENABLED << 2)
+#define ETH_INT_CAUSE_RX_ERROR (ETH_RX_QUEUES_ENABLED << 9)
+#define ETH_INT_CAUSE_RX (ETH_INT_CAUSE_RX_DONE | ETH_INT_CAUSE_RX_ERROR)
+#define ETH_INT_CAUSE_EXT 0x00000002
+#define ETH_INT_UNMASK_ALL (ETH_INT_CAUSE_RX | ETH_INT_CAUSE_EXT)
+
+#define ETH_INT_CAUSE_TX_DONE (ETH_TX_QUEUES_ENABLED << 0)
+#define ETH_INT_CAUSE_TX_ERROR (ETH_TX_QUEUES_ENABLED << 8)
+#define ETH_INT_CAUSE_TX (ETH_INT_CAUSE_TX_DONE | ETH_INT_CAUSE_TX_ERROR)
+#define ETH_INT_CAUSE_PHY 0x00010000
+#define ETH_INT_UNMASK_ALL_EXT (ETH_INT_CAUSE_TX | ETH_INT_CAUSE_PHY)
+
+#define ETH_INT_MASK_ALL 0x00000000
+#define ETH_INT_MASK_ALL_EXT 0x00000000
+
+#define PHY_WAIT_ITERATIONS 1000 /* 1000 iterations * 10uS = 10mS max */
+#define PHY_WAIT_MICRO_SECONDS 10
/* Buffer offset from buffer pointer */
#define RX_BUF_OFFSET 0x2
@@ -133,88 +111,71 @@
#define ETH_MIB_LATE_COLLISION 0x7c
/* Port serial status reg (PSR) */
-#define ETH_INTERFACE_GMII_MII 0
-#define ETH_INTERFACE_PCM BIT0
-#define ETH_LINK_IS_DOWN 0
-#define ETH_LINK_IS_UP BIT1
-#define ETH_PORT_AT_HALF_DUPLEX 0
-#define ETH_PORT_AT_FULL_DUPLEX BIT2
-#define ETH_RX_FLOW_CTRL_DISABLED 0
-#define ETH_RX_FLOW_CTRL_ENBALED BIT3
-#define ETH_GMII_SPEED_100_10 0
-#define ETH_GMII_SPEED_1000 BIT4
-#define ETH_MII_SPEED_10 0
-#define ETH_MII_SPEED_100 BIT5
-#define ETH_NO_TX 0
-#define ETH_TX_IN_PROGRESS BIT7
-#define ETH_BYPASS_NO_ACTIVE 0
-#define ETH_BYPASS_ACTIVE BIT8
-#define ETH_PORT_NOT_AT_PARTITION_STATE 0
-#define ETH_PORT_AT_PARTITION_STATE BIT9
-#define ETH_PORT_TX_FIFO_NOT_EMPTY 0
-#define ETH_PORT_TX_FIFO_EMPTY BIT10
-
-#define ETH_DEFAULT_RX_BPDU_QUEUE_3 (BIT23 | BIT22)
-#define ETH_DEFAULT_RX_BPDU_QUEUE_4 BIT24
-#define ETH_DEFAULT_RX_BPDU_QUEUE_5 (BIT24 | BIT22)
-#define ETH_DEFAULT_RX_BPDU_QUEUE_6 (BIT24 | BIT23)
-#define ETH_DEFAULT_RX_BPDU_QUEUE_7 (BIT24 | BIT23 | BIT22)
+#define ETH_INTERFACE_PCM 0x00000001
+#define ETH_LINK_IS_UP 0x00000002
+#define ETH_PORT_AT_FULL_DUPLEX 0x00000004
+#define ETH_RX_FLOW_CTRL_ENABLED 0x00000008
+#define ETH_GMII_SPEED_1000 0x00000010
+#define ETH_MII_SPEED_100 0x00000020
+#define ETH_TX_IN_PROGRESS 0x00000080
+#define ETH_BYPASS_ACTIVE 0x00000100
+#define ETH_PORT_AT_PARTITION_STATE 0x00000200
+#define ETH_PORT_TX_FIFO_EMPTY 0x00000400
/* SMI reg */
-#define ETH_SMI_BUSY BIT28 /* 0 - Write, 1 - Read */
-#define ETH_SMI_READ_VALID BIT27 /* 0 - Write, 1 - Read */
-#define ETH_SMI_OPCODE_WRITE 0 /* Completion of Read operation */
-#define ETH_SMI_OPCODE_READ BIT26 /* Operation is in progress */
+#define ETH_SMI_BUSY 0x10000000 /* 0 - Write, 1 - Read */
+#define ETH_SMI_READ_VALID 0x08000000 /* 0 - Write, 1 - Read */
+#define ETH_SMI_OPCODE_WRITE 0 /* Completion of Read */
+#define ETH_SMI_OPCODE_READ 0x04000000 /* Operation is in progress */
+
+/* Interrupt Cause Register Bit Definitions */
/* SDMA command status fields macros */
/* Tx & Rx descriptors status */
-#define ETH_ERROR_SUMMARY (BIT0)
+#define ETH_ERROR_SUMMARY 0x00000001
/* Tx & Rx descriptors command */
-#define ETH_BUFFER_OWNED_BY_DMA (BIT31)
+#define ETH_BUFFER_OWNED_BY_DMA 0x80000000
/* Tx descriptors status */
-#define ETH_LC_ERROR (0 )
-#define ETH_UR_ERROR (BIT1 )
-#define ETH_RL_ERROR (BIT2 )
-#define ETH_LLC_SNAP_FORMAT (BIT9 )
+#define ETH_LC_ERROR 0
+#define ETH_UR_ERROR 0x00000002
+#define ETH_RL_ERROR 0x00000004
+#define ETH_LLC_SNAP_FORMAT 0x00000200
/* Rx descriptors status */
-#define ETH_CRC_ERROR (0 )
-#define ETH_OVERRUN_ERROR (BIT1 )
-#define ETH_MAX_FRAME_LENGTH_ERROR (BIT2 )
-#define ETH_RESOURCE_ERROR ((BIT2 | BIT1))
-#define ETH_VLAN_TAGGED (BIT19)
-#define ETH_BPDU_FRAME (BIT20)
-#define ETH_TCP_FRAME_OVER_IP_V_4 (0 )
-#define ETH_UDP_FRAME_OVER_IP_V_4 (BIT21)
-#define ETH_OTHER_FRAME_TYPE (BIT22)
-#define ETH_LAYER_2_IS_ETH_V_2 (BIT23)
-#define ETH_FRAME_TYPE_IP_V_4 (BIT24)
-#define ETH_FRAME_HEADER_OK (BIT25)
-#define ETH_RX_LAST_DESC (BIT26)
-#define ETH_RX_FIRST_DESC (BIT27)
-#define ETH_UNKNOWN_DESTINATION_ADDR (BIT28)
-#define ETH_RX_ENABLE_INTERRUPT (BIT29)
-#define ETH_LAYER_4_CHECKSUM_OK (BIT30)
+#define ETH_OVERRUN_ERROR 0x00000002
+#define ETH_MAX_FRAME_LENGTH_ERROR 0x00000004
+#define ETH_RESOURCE_ERROR 0x00000006
+#define ETH_VLAN_TAGGED 0x00080000
+#define ETH_BPDU_FRAME 0x00100000
+#define ETH_UDP_FRAME_OVER_IP_V_4 0x00200000
+#define ETH_OTHER_FRAME_TYPE 0x00400000
+#define ETH_LAYER_2_IS_ETH_V_2 0x00800000
+#define ETH_FRAME_TYPE_IP_V_4 0x01000000
+#define ETH_FRAME_HEADER_OK 0x02000000
+#define ETH_RX_LAST_DESC 0x04000000
+#define ETH_RX_FIRST_DESC 0x08000000
+#define ETH_UNKNOWN_DESTINATION_ADDR 0x10000000
+#define ETH_RX_ENABLE_INTERRUPT 0x20000000
+#define ETH_LAYER_4_CHECKSUM_OK 0x40000000
/* Rx descriptors byte count */
-#define ETH_FRAME_FRAGMENTED (BIT2)
+#define ETH_FRAME_FRAGMENTED 0x00000004
/* Tx descriptors command */
-#define ETH_LAYER_4_CHECKSUM_FIRST_DESC (BIT10)
-#define ETH_FRAME_SET_TO_VLAN (BIT15)
-#define ETH_TCP_FRAME (0 )
-#define ETH_UDP_FRAME (BIT16)
-#define ETH_GEN_TCP_UDP_CHECKSUM (BIT17)
-#define ETH_GEN_IP_V_4_CHECKSUM (BIT18)
-#define ETH_ZERO_PADDING (BIT19)
-#define ETH_TX_LAST_DESC (BIT20)
-#define ETH_TX_FIRST_DESC (BIT21)
-#define ETH_GEN_CRC (BIT22)
-#define ETH_TX_ENABLE_INTERRUPT (BIT23)
-#define ETH_AUTO_MODE (BIT30)
+#define ETH_LAYER_4_CHECKSUM_FIRST_DESC 0x00000400
+#define ETH_FRAME_SET_TO_VLAN 0x00008000
+#define ETH_UDP_FRAME 0x00010000
+#define ETH_GEN_TCP_UDP_CHECKSUM 0x00020000
+#define ETH_GEN_IP_V_4_CHECKSUM 0x00040000
+#define ETH_ZERO_PADDING 0x00080000
+#define ETH_TX_LAST_DESC 0x00100000
+#define ETH_TX_FIRST_DESC 0x00200000
+#define ETH_GEN_CRC 0x00400000
+#define ETH_TX_ENABLE_INTERRUPT 0x00800000
+#define ETH_AUTO_MODE 0x40000000
#define ETH_TX_IHL_SHIFT 11
@@ -324,13 +285,6 @@
struct mv643xx_private {
int port_num; /* User Ethernet port number */
- u8 port_mac_addr[6]; /* User defined port MAC address.*/
- u32 port_config; /* User port configuration value*/
- u32 port_config_extend; /* User port config extend value*/
- u32 port_sdma_config; /* User port SDMA config value */
- u32 port_serial_control; /* User port serial control value */
- u32 port_tx_queue_command; /* Port active Tx queues summary*/
- u32 port_rx_queue_command; /* Port active Rx queues summary*/
u32 rx_sram_addr; /* Base address of rx sram area */
u32 rx_sram_size; /* Size of rx sram area */
@@ -338,7 +292,6 @@
u32 tx_sram_size; /* Size of tx sram area */
int rx_resource_err; /* Rx ring resource error flag */
- int tx_resource_err; /* Tx ring resource error flag */
/* Tx/Rx rings managment indexes fields. For driver use */
@@ -347,10 +300,6 @@
/* Next available and first returning Tx resource */
int tx_curr_desc_q, tx_used_desc_q;
-#ifdef MV643XX_CHECKSUM_OFFLOAD_TX
- int tx_first_desc_q;
- u32 tx_first_command;
-#endif
#ifdef MV643XX_TX_FAST_REFILL
u32 tx_clean_threshold;
@@ -358,54 +307,43 @@
struct eth_rx_desc *p_rx_desc_area;
dma_addr_t rx_desc_dma;
- unsigned int rx_desc_area_size;
+ int rx_desc_area_size;
struct sk_buff **rx_skb;
struct eth_tx_desc *p_tx_desc_area;
dma_addr_t tx_desc_dma;
- unsigned int tx_desc_area_size;
+ int tx_desc_area_size;
struct sk_buff **tx_skb;
struct work_struct tx_timeout_task;
- /*
- * Former struct mv643xx_eth_priv members start here
- */
struct net_device_stats stats;
struct mv643xx_mib_counters mib_counters;
spinlock_t lock;
/* Size of Tx Ring per queue */
- unsigned int tx_ring_size;
- /* Ammont of SKBs outstanding on Tx queue */
- unsigned int tx_ring_skbs;
+ int tx_ring_size;
+ /* Number of tx descriptors in use */
+ int tx_desc_count;
/* Size of Rx Ring per queue */
- unsigned int rx_ring_size;
- /* Ammount of SKBs allocated to Rx Ring per queue */
- unsigned int rx_ring_skbs;
-
- /*
- * rx_task used to fill RX ring out of bottom half context
- */
- struct work_struct rx_task;
+ int rx_ring_size;
+ /* Number of rx descriptors in use */
+ int rx_desc_count;
/*
* Used in case RX Ring is empty, which can be caused when
* system does not have resources (skb's)
*/
struct timer_list timeout;
- long rx_task_busy __attribute__ ((aligned(SMP_CACHE_BYTES)));
- unsigned rx_timer_flag;
u32 rx_int_coal;
u32 tx_int_coal;
+ struct mii_if_info mii;
};
-/* ethernet.h API list */
-
/* Port operation control routines */
static void eth_port_init(struct mv643xx_private *mp);
static void eth_port_reset(unsigned int eth_port_num);
-static void eth_port_start(struct mv643xx_private *mp);
+static void eth_port_start(struct net_device *dev);
/* Port MAC address routines */
static void eth_port_uc_addr_set(unsigned int eth_port_num,
@@ -423,10 +361,6 @@
static void eth_clear_mib_counters(unsigned int eth_port_num);
/* Port data flow control routines */
-static ETH_FUNC_RET_STATUS eth_port_send(struct mv643xx_private *mp,
- struct pkt_info *p_pkt_info);
-static ETH_FUNC_RET_STATUS eth_tx_return_desc(struct mv643xx_private *mp,
- struct pkt_info *p_pkt_info);
static ETH_FUNC_RET_STATUS eth_port_receive(struct mv643xx_private *mp,
struct pkt_info *p_pkt_info);
static ETH_FUNC_RET_STATUS eth_rx_return_buff(struct mv643xx_private *mp,
diff --git a/drivers/net/natsemi.c b/drivers/net/natsemi.c
index 9d6d254..0192064 100644
--- a/drivers/net/natsemi.c
+++ b/drivers/net/natsemi.c
@@ -189,7 +189,7 @@
/* Maximum number of multicast addresses to filter (vs. rx-all-multicast).
This chip uses a 512 element hash table based on the Ethernet CRC. */
-static int multicast_filter_limit = 100;
+static const int multicast_filter_limit = 100;
/* Set the copy breakpoint for the copy-only-tiny-frames scheme.
Setting to > 1518 effectively disables this feature. */
@@ -374,7 +374,7 @@
/* array of board data directly indexed by pci_tbl[x].driver_data */
-static struct {
+static const struct {
const char *name;
unsigned long flags;
} natsemi_pci_info[] __devinitdata = {
diff --git a/drivers/net/ne-h8300.c b/drivers/net/ne-h8300.c
index 8f40368..aaebd28 100644
--- a/drivers/net/ne-h8300.c
+++ b/drivers/net/ne-h8300.c
@@ -27,6 +27,7 @@
#include <linux/delay.h>
#include <linux/netdevice.h>
#include <linux/etherdevice.h>
+#include <linux/jiffies.h>
#include <asm/system.h>
#include <asm/io.h>
@@ -365,7 +366,7 @@
/* This check _should_not_ be necessary, omit eventually. */
while ((inb_p(NE_BASE+EN0_ISR) & ENISR_RESET) == 0)
- if (jiffies - reset_start_time > 2*HZ/100) {
+ if (time_after(jiffies, reset_start_time + 2*HZ/100)) {
printk(KERN_WARNING "%s: ne_reset_8390() did not complete.\n", dev->name);
break;
}
@@ -580,7 +581,7 @@
#endif
while ((inb_p(NE_BASE + EN0_ISR) & ENISR_RDC) == 0)
- if (jiffies - dma_start > 2*HZ/100) { /* 20ms */
+ if (time_after(jiffies, dma_start + 2*HZ/100)) { /* 20ms */
printk(KERN_WARNING "%s: timeout waiting for Tx RDC.\n", dev->name);
ne_reset_8390(dev);
NS8390_init(dev,1);
diff --git a/drivers/net/ne.c b/drivers/net/ne.c
index 94f782d..08b218c 100644
--- a/drivers/net/ne.c
+++ b/drivers/net/ne.c
@@ -50,6 +50,7 @@
#include <linux/delay.h>
#include <linux/netdevice.h>
#include <linux/etherdevice.h>
+#include <linux/jiffies.h>
#include <asm/system.h>
#include <asm/io.h>
@@ -341,7 +342,7 @@
outb(inb(ioaddr + NE_RESET), ioaddr + NE_RESET);
while ((inb_p(ioaddr + EN0_ISR) & ENISR_RESET) == 0)
- if (jiffies - reset_start_time > 2*HZ/100) {
+ if (time_after(jiffies, reset_start_time + 2*HZ/100)) {
if (bad_card) {
printk(" (warning: no reset ack)");
break;
@@ -580,7 +581,7 @@
/* This check _should_not_ be necessary, omit eventually. */
while ((inb_p(NE_BASE+EN0_ISR) & ENISR_RESET) == 0)
- if (jiffies - reset_start_time > 2*HZ/100) {
+ if (time_after(jiffies, reset_start_time + 2*HZ/100)) {
printk(KERN_WARNING "%s: ne_reset_8390() did not complete.\n", dev->name);
break;
}
@@ -787,7 +788,7 @@
#endif
while ((inb_p(nic_base + EN0_ISR) & ENISR_RDC) == 0)
- if (jiffies - dma_start > 2*HZ/100) { /* 20ms */
+ if (time_after(jiffies, dma_start + 2*HZ/100)) { /* 20ms */
printk(KERN_WARNING "%s: timeout waiting for Tx RDC.\n", dev->name);
ne_reset_8390(dev);
NS8390_init(dev,1);
diff --git a/drivers/net/ne2.c b/drivers/net/ne2.c
index e6df375..2aa7b77f 100644
--- a/drivers/net/ne2.c
+++ b/drivers/net/ne2.c
@@ -75,6 +75,7 @@
#include <linux/etherdevice.h>
#include <linux/skbuff.h>
#include <linux/bitops.h>
+#include <linux/jiffies.h>
#include <asm/system.h>
#include <asm/io.h>
@@ -395,7 +396,7 @@
outb(inb(base_addr + NE_RESET), base_addr + NE_RESET);
while ((inb_p(base_addr + EN0_ISR) & ENISR_RESET) == 0)
- if (jiffies - reset_start_time > 2*HZ/100) {
+ if (time_after(jiffies, reset_start_time + 2*HZ/100)) {
printk(" not found (no reset ack).\n");
retval = -ENODEV;
goto out;
@@ -548,7 +549,7 @@
/* This check _should_not_ be necessary, omit eventually. */
while ((inb_p(NE_BASE+EN0_ISR) & ENISR_RESET) == 0)
- if (jiffies - reset_start_time > 2*HZ/100) {
+ if (time_after(jiffies, reset_start_time + 2*HZ/100)) {
printk("%s: ne_reset_8390() did not complete.\n",
dev->name);
break;
@@ -749,7 +750,7 @@
#endif
while ((inb_p(nic_base + EN0_ISR) & ENISR_RDC) == 0)
- if (jiffies - dma_start > 2*HZ/100) { /* 20ms */
+ if (time_after(jiffies, dma_start + 2*HZ/100)) { /* 20ms */
printk("%s: timeout waiting for Tx RDC.\n", dev->name);
ne_reset_8390(dev);
NS8390_init(dev,1);
diff --git a/drivers/net/ne2k-pci.c b/drivers/net/ne2k-pci.c
index d11821d..e3ebb58 100644
--- a/drivers/net/ne2k-pci.c
+++ b/drivers/net/ne2k-pci.c
@@ -117,7 +117,7 @@
};
-static struct {
+static const struct {
char *name;
int flags;
} pci_clone_list[] __devinitdata = {
diff --git a/drivers/net/ns83820.c b/drivers/net/ns83820.c
index b0c3b6a..0fede50a 100644
--- a/drivers/net/ns83820.c
+++ b/drivers/net/ns83820.c
@@ -116,6 +116,7 @@
#include <linux/timer.h>
#include <linux/if_vlan.h>
#include <linux/rtnetlink.h>
+#include <linux/jiffies.h>
#include <asm/io.h>
#include <asm/uaccess.h>
@@ -651,7 +652,7 @@
static void fastcall phy_intr(struct net_device *ndev)
{
struct ns83820 *dev = PRIV(ndev);
- static char *speeds[] = { "10", "100", "1000", "1000(?)", "1000F" };
+ static const char *speeds[] = { "10", "100", "1000", "1000(?)", "1000F" };
u32 cfg, new_cfg;
u32 tbisr, tanar, tanlpar;
int speed, fullduplex, newlinkstate;
@@ -1607,7 +1608,7 @@
{
struct ns83820 *dev = PRIV(ndev);
int timed_out = 0;
- long start;
+ unsigned long start;
u32 status;
int loops = 0;
@@ -1625,7 +1626,7 @@
break;
if (status & fail)
break;
- if ((jiffies - start) >= HZ) {
+ if (time_after_eq(jiffies, start + HZ)) {
timed_out = 1;
break;
}
diff --git a/drivers/net/oaknet.c b/drivers/net/oaknet.c
index 62167a2..d0f686d 100644
--- a/drivers/net/oaknet.c
+++ b/drivers/net/oaknet.c
@@ -20,6 +20,7 @@
#include <linux/netdevice.h>
#include <linux/etherdevice.h>
#include <linux/init.h>
+#include <linux/jiffies.h>
#include <asm/board.h>
#include <asm/io.h>
@@ -606,7 +607,7 @@
#endif
while ((ei_ibp(base + EN0_ISR) & ENISR_RDC) == 0) {
- if (jiffies - start > OAKNET_WAIT) {
+ if (time_after(jiffies, start + OAKNET_WAIT)) {
printk("%s: timeout waiting for Tx RDC.\n", dev->name);
oaknet_reset_8390(dev);
NS8390_init(dev, TRUE);
diff --git a/drivers/net/pcmcia/3c574_cs.c b/drivers/net/pcmcia/3c574_cs.c
index 48774ef..ce90bec 100644
--- a/drivers/net/pcmcia/3c574_cs.c
+++ b/drivers/net/pcmcia/3c574_cs.c
@@ -341,7 +341,7 @@
#define CS_CHECK(fn, ret) \
do { last_fn = (fn); if ((last_ret = (ret)) != 0) goto cs_failed; } while (0)
-static char *ram_split[] = {"5:3", "3:1", "1:1", "3:5"};
+static const char *ram_split[] = {"5:3", "3:1", "1:1", "3:5"};
static void tc574_config(dev_link_t *link)
{
diff --git a/drivers/net/pcmcia/3c589_cs.c b/drivers/net/pcmcia/3c589_cs.c
index 1c3c9c6..3dba508 100644
--- a/drivers/net/pcmcia/3c589_cs.c
+++ b/drivers/net/pcmcia/3c589_cs.c
@@ -39,6 +39,7 @@
#include <linux/if_arp.h>
#include <linux/ioport.h>
#include <linux/bitops.h>
+#include <linux/jiffies.h>
#include <pcmcia/cs_types.h>
#include <pcmcia/cs.h>
@@ -115,7 +116,7 @@
spinlock_t lock;
};
-static char *if_names[] = { "auto", "10baseT", "10base2", "AUI" };
+static const char *if_names[] = { "auto", "10baseT", "10base2", "AUI" };
/*====================================================================*/
@@ -796,7 +797,7 @@
media = inw(ioaddr+WN4_MEDIA) & 0xc810;
/* Ignore collisions unless we've had no irq's recently */
- if (jiffies - lp->last_irq < HZ) {
+ if (time_before(jiffies, lp->last_irq + HZ)) {
media &= ~0x0010;
} else {
/* Try harder to detect carrier errors */
diff --git a/drivers/net/pcmcia/fmvj18x_cs.c b/drivers/net/pcmcia/fmvj18x_cs.c
index 28fe2fb..b7ac14ba 100644
--- a/drivers/net/pcmcia/fmvj18x_cs.c
+++ b/drivers/net/pcmcia/fmvj18x_cs.c
@@ -309,7 +309,7 @@
static int mfc_try_io_port(dev_link_t *link)
{
int i, ret;
- static kio_addr_t serial_base[5] = { 0x3f8, 0x2f8, 0x3e8, 0x2e8, 0x0 };
+ static const kio_addr_t serial_base[5] = { 0x3f8, 0x2f8, 0x3e8, 0x2e8, 0x0 };
for (i = 0; i < 5; i++) {
link->io.BasePort2 = serial_base[i];
diff --git a/drivers/net/pcmcia/nmclan_cs.c b/drivers/net/pcmcia/nmclan_cs.c
index 4a23225..787176c 100644
--- a/drivers/net/pcmcia/nmclan_cs.c
+++ b/drivers/net/pcmcia/nmclan_cs.c
@@ -388,7 +388,7 @@
DRV_NAME " " DRV_VERSION " (Roger C. Pao)";
#endif
-static char *if_names[]={
+static const char *if_names[]={
"Auto", "10baseT", "BNC",
};
diff --git a/drivers/net/pcmcia/pcnet_cs.c b/drivers/net/pcmcia/pcnet_cs.c
index d85b758f3..b46e5f7 100644
--- a/drivers/net/pcmcia/pcnet_cs.c
+++ b/drivers/net/pcmcia/pcnet_cs.c
@@ -66,7 +66,7 @@
#define PCNET_RDC_TIMEOUT (2*HZ/100) /* Max wait in jiffies for Tx RDC */
-static char *if_names[] = { "auto", "10baseT", "10base2"};
+static const char *if_names[] = { "auto", "10baseT", "10base2"};
#ifdef PCMCIA_DEBUG
static int pc_debug = PCMCIA_DEBUG;
@@ -1727,6 +1727,7 @@
PCMCIA_DEVICE_PROD_ID12("Linksys", "EtherFast 10/100 PC Card (PCMPC100 V2)", 0x0733cc81, 0x3a3b28e9),
PCMCIA_DEVICE_PROD_ID12("Linksys", "HomeLink Phoneline + 10/100 Network PC Card (PCM100H1)", 0x733cc81, 0x7a3e5c3a),
PCMCIA_DEVICE_PROD_ID12("Logitec", "LPM-LN100TX", 0x88fcdeda, 0x6d772737),
+ PCMCIA_DEVICE_PROD_ID12("Logitec", "LPM-LN100TE", 0x88fcdeda, 0x0e714bee),
PCMCIA_DEVICE_PROD_ID12("Logitec", "LPM-LN20T", 0x88fcdeda, 0x81090922),
PCMCIA_DEVICE_PROD_ID12("LONGSHINE", "PCMCIA Ethernet Card", 0xf866b0b0, 0x6f6652e0),
PCMCIA_DEVICE_PROD_ID12("MACNICA", "ME1-JEIDA", 0x20841b68, 0xaf8a3578),
diff --git a/drivers/net/pcmcia/smc91c92_cs.c b/drivers/net/pcmcia/smc91c92_cs.c
index 0122415df..8839c4f 100644
--- a/drivers/net/pcmcia/smc91c92_cs.c
+++ b/drivers/net/pcmcia/smc91c92_cs.c
@@ -59,7 +59,7 @@
/*====================================================================*/
-static char *if_names[] = { "auto", "10baseT", "10base2"};
+static const char *if_names[] = { "auto", "10baseT", "10base2"};
/* Module parameters */
@@ -777,7 +777,7 @@
static int osi_config(dev_link_t *link)
{
struct net_device *dev = link->priv;
- static kio_addr_t com[4] = { 0x3f8, 0x2f8, 0x3e8, 0x2e8 };
+ static const kio_addr_t com[4] = { 0x3f8, 0x2f8, 0x3e8, 0x2e8 };
int i, j;
link->conf.Attributes |= CONF_ENABLE_SPKR;
diff --git a/drivers/net/pcmcia/xirc2ps_cs.c b/drivers/net/pcmcia/xirc2ps_cs.c
index 593d8ad..eed4968 100644
--- a/drivers/net/pcmcia/xirc2ps_cs.c
+++ b/drivers/net/pcmcia/xirc2ps_cs.c
@@ -208,7 +208,7 @@
#define XIRCREG45_REV 15 /* Revision Register (rd) */
#define XIRCREG50_IA 8 /* Individual Address (8-13) */
-static char *if_names[] = { "Auto", "10BaseT", "10Base2", "AUI", "100BaseT" };
+static const char *if_names[] = { "Auto", "10BaseT", "10Base2", "AUI", "100BaseT" };
/****************
* All the PCMCIA modules use PCMCIA_DEBUG to control debugging. If
diff --git a/drivers/net/pcnet32.c b/drivers/net/pcnet32.c
index 8f6cf8c..7e90057 100644
--- a/drivers/net/pcnet32.c
+++ b/drivers/net/pcnet32.c
@@ -26,7 +26,7 @@
#define DRV_RELDATE "01.Nov.2005"
#define PFX DRV_NAME ": "
-static const char *version =
+static const char * const version =
DRV_NAME ".c:v" DRV_VERSION " " DRV_RELDATE " tsbogend@alpha.franken.de\n";
#include <linux/module.h>
@@ -109,7 +109,7 @@
* table to translate option values from tulip
* to internal options
*/
-static unsigned char options_mapping[] = {
+static const unsigned char options_mapping[] = {
PCNET32_PORT_ASEL, /* 0 Auto-select */
PCNET32_PORT_AUI, /* 1 BNC/AUI */
PCNET32_PORT_AUI, /* 2 AUI/BNC */
@@ -733,7 +733,7 @@
int rc; /* return code */
int size; /* size of packets */
unsigned char *packet; /* source packet data */
- static int data_len = 60; /* length of source packets */
+ static const int data_len = 60; /* length of source packets */
unsigned long flags;
unsigned long ticks;
diff --git a/drivers/net/phy/phy.c b/drivers/net/phy/phy.c
index 1474b7c..33cec2d 100644
--- a/drivers/net/phy/phy.c
+++ b/drivers/net/phy/phy.c
@@ -132,7 +132,7 @@
};
/* A mapping of all SUPPORTED settings to speed/duplex */
-static struct phy_setting settings[] = {
+static const struct phy_setting settings[] = {
{
.speed = 10000,
.duplex = DUPLEX_FULL,
diff --git a/drivers/net/plip.c b/drivers/net/plip.c
index 87ee327..d4449d6 100644
--- a/drivers/net/plip.c
+++ b/drivers/net/plip.c
@@ -123,7 +123,7 @@
#ifndef NET_DEBUG
#define NET_DEBUG 1
#endif
-static unsigned int net_debug = NET_DEBUG;
+static const unsigned int net_debug = NET_DEBUG;
#define ENABLE(irq) if (irq != -1) enable_irq(irq)
#define DISABLE(irq) if (irq != -1) disable_irq(irq)
@@ -351,7 +351,7 @@
typedef int (*plip_func)(struct net_device *dev, struct net_local *nl,
struct plip_local *snd, struct plip_local *rcv);
-static plip_func connection_state_table[] =
+static const plip_func connection_state_table[] =
{
plip_none,
plip_receive_packet,
diff --git a/drivers/net/ppp_async.c b/drivers/net/ppp_async.c
index aa6540b..23659fd 100644
--- a/drivers/net/ppp_async.c
+++ b/drivers/net/ppp_async.c
@@ -30,6 +30,7 @@
#include <linux/ppp_channel.h>
#include <linux/spinlock.h>
#include <linux/init.h>
+#include <linux/jiffies.h>
#include <asm/uaccess.h>
#include <asm/string.h>
@@ -570,7 +571,7 @@
* character if necessary.
*/
if (islcp || flag_time == 0
- || jiffies - ap->last_xmit >= flag_time)
+ || time_after_eq(jiffies, ap->last_xmit + flag_time))
*buf++ = PPP_FLAG;
ap->last_xmit = jiffies;
fcs = PPP_INITFCS;
diff --git a/drivers/net/ppp_synctty.c b/drivers/net/ppp_synctty.c
index 33cb825..33255fe 100644
--- a/drivers/net/ppp_synctty.c
+++ b/drivers/net/ppp_synctty.c
@@ -108,7 +108,7 @@
ppp_print_hex (register __u8 * out, const __u8 * in, int count)
{
register __u8 next_ch;
- static char hex[] = "0123456789ABCDEF";
+ static const char hex[] = "0123456789ABCDEF";
while (count-- > 0) {
next_ch = *in++;
diff --git a/drivers/net/r8169.c b/drivers/net/r8169.c
index 8cc0d0b..0ad3310 100644
--- a/drivers/net/r8169.c
+++ b/drivers/net/r8169.c
@@ -113,11 +113,11 @@
static int num_media = 0;
/* Maximum events (Rx packets, etc.) to handle at each interrupt. */
-static int max_interrupt_work = 20;
+static const int max_interrupt_work = 20;
/* Maximum number of multicast addresses to filter (vs. Rx-all-multicast).
The RTL chips use a 64 element hash table based on the Ethernet CRC. */
-static int multicast_filter_limit = 32;
+static const int multicast_filter_limit = 32;
/* MAC address length */
#define MAC_ADDR_LEN 6
diff --git a/drivers/net/s2io.c b/drivers/net/s2io.c
index b7f00d6..79208f4 100644
--- a/drivers/net/s2io.c
+++ b/drivers/net/s2io.c
@@ -57,23 +57,27 @@
#include <linux/ethtool.h>
#include <linux/workqueue.h>
#include <linux/if_vlan.h>
+#include <linux/ip.h>
+#include <linux/tcp.h>
+#include <net/tcp.h>
#include <asm/system.h>
#include <asm/uaccess.h>
#include <asm/io.h>
+#include <asm/div64.h>
/* local include */
#include "s2io.h"
#include "s2io-regs.h"
-#define DRV_VERSION "Version 2.0.9.4"
+#define DRV_VERSION "2.0.11.2"
/* S2io Driver name & version. */
static char s2io_driver_name[] = "Neterion";
static char s2io_driver_version[] = DRV_VERSION;
-int rxd_size[4] = {32,48,48,64};
-int rxd_count[4] = {127,85,85,63};
+static int rxd_size[4] = {32,48,48,64};
+static int rxd_count[4] = {127,85,85,63};
static inline int RXD_IS_UP2DT(RxD_t *rxdp)
{
@@ -168,6 +172,11 @@
{"\n DRIVER STATISTICS"},
{"single_bit_ecc_errs"},
{"double_bit_ecc_errs"},
+ ("lro_aggregated_pkts"),
+ ("lro_flush_both_count"),
+ ("lro_out_of_sequence_pkts"),
+ ("lro_flush_due_to_max_pkts"),
+ ("lro_avg_aggr_pkts"),
};
#define S2IO_STAT_LEN sizeof(ethtool_stats_keys)/ ETH_GSTRING_LEN
@@ -214,7 +223,7 @@
#define SWITCH_SIGN 0xA5A5A5A5A5A5A5A5ULL
#define END_SIGN 0x0
-static u64 herc_act_dtx_cfg[] = {
+static const u64 herc_act_dtx_cfg[] = {
/* Set address */
0x8000051536750000ULL, 0x80000515367500E0ULL,
/* Write data */
@@ -235,7 +244,7 @@
END_SIGN
};
-static u64 xena_mdio_cfg[] = {
+static const u64 xena_mdio_cfg[] = {
/* Reset PMA PLL */
0xC001010000000000ULL, 0xC0010100000000E0ULL,
0xC0010100008000E4ULL,
@@ -245,7 +254,7 @@
END_SIGN
};
-static u64 xena_dtx_cfg[] = {
+static const u64 xena_dtx_cfg[] = {
0x8000051500000000ULL, 0x80000515000000E0ULL,
0x80000515D93500E4ULL, 0x8001051500000000ULL,
0x80010515000000E0ULL, 0x80010515001E00E4ULL,
@@ -273,7 +282,7 @@
* Constants for Fixing the MacAddress problem seen mostly on
* Alpha machines.
*/
-static u64 fix_mac[] = {
+static const u64 fix_mac[] = {
0x0060000000000000ULL, 0x0060600000000000ULL,
0x0040600000000000ULL, 0x0000600000000000ULL,
0x0020600000000000ULL, 0x0060600000000000ULL,
@@ -317,6 +326,12 @@
static unsigned int rxsync_frequency = 3;
/* Interrupt type. Values can be 0(INTA), 1(MSI), 2(MSI_X) */
static unsigned int intr_type = 0;
+/* Large receive offload feature */
+static unsigned int lro = 0;
+/* Max pkts to be aggregated by LRO at one time. If not specified,
+ * aggregation happens until we hit max IP pkt size(64K)
+ */
+static unsigned int lro_max_pkts = 0xFFFF;
/*
* S2IO device table.
@@ -1476,6 +1491,19 @@
writel((u32) (val64 >> 32), (add + 4));
val64 = readq(&bar0->mac_cfg);
+ /* Enable FCS stripping by adapter */
+ add = &bar0->mac_cfg;
+ val64 = readq(&bar0->mac_cfg);
+ val64 |= MAC_CFG_RMAC_STRIP_FCS;
+ if (nic->device_type == XFRAME_II_DEVICE)
+ writeq(val64, &bar0->mac_cfg);
+ else {
+ writeq(RMAC_CFG_KEY(0x4C0D), &bar0->rmac_cfg_key);
+ writel((u32) (val64), add);
+ writeq(RMAC_CFG_KEY(0x4C0D), &bar0->rmac_cfg_key);
+ writel((u32) (val64 >> 32), (add + 4));
+ }
+
/*
* Set the time value to be inserted in the pause frame
* generated by xena.
@@ -2127,7 +2155,7 @@
}
}
-int fill_rxd_3buf(nic_t *nic, RxD_t *rxdp, struct sk_buff *skb)
+static int fill_rxd_3buf(nic_t *nic, RxD_t *rxdp, struct sk_buff *skb)
{
struct net_device *dev = nic->dev;
struct sk_buff *frag_list;
@@ -2569,6 +2597,8 @@
#ifndef CONFIG_S2IO_NAPI
int pkt_cnt = 0;
#endif
+ int i;
+
spin_lock(&nic->rx_lock);
if (atomic_read(&nic->card_state) == CARD_DOWN) {
DBG_PRINT(INTR_DBG, "%s: %s going down for reset\n",
@@ -2661,6 +2691,18 @@
break;
#endif
}
+ if (nic->lro) {
+ /* Clear all LRO sessions before exiting */
+ for (i=0; i<MAX_LRO_SESSIONS; i++) {
+ lro_t *lro = &nic->lro0_n[i];
+ if (lro->in_use) {
+ update_L3L4_header(nic, lro);
+ queue_rx_frame(lro->parent);
+ clear_lro_session(lro);
+ }
+ }
+ }
+
spin_unlock(&nic->rx_lock);
}
@@ -2852,7 +2894,7 @@
* void.
*/
-void s2io_reset(nic_t * sp)
+static void s2io_reset(nic_t * sp)
{
XENA_dev_config_t __iomem *bar0 = sp->bar0;
u64 val64;
@@ -2940,7 +2982,7 @@
* SUCCESS on success and FAILURE on failure.
*/
-int s2io_set_swapper(nic_t * sp)
+static int s2io_set_swapper(nic_t * sp)
{
struct net_device *dev = sp->dev;
XENA_dev_config_t __iomem *bar0 = sp->bar0;
@@ -3089,7 +3131,7 @@
return ret;
}
-void restore_xmsi_data(nic_t *nic)
+static void restore_xmsi_data(nic_t *nic)
{
XENA_dev_config_t __iomem *bar0 = nic->bar0;
u64 val64;
@@ -3180,7 +3222,7 @@
return 0;
}
-int s2io_enable_msi_x(nic_t *nic)
+static int s2io_enable_msi_x(nic_t *nic)
{
XENA_dev_config_t __iomem *bar0 = nic->bar0;
u64 tx_mat, rx_mat;
@@ -3668,23 +3710,32 @@
* else schedule a tasklet to reallocate the buffers.
*/
for (i = 0; i < config->rx_ring_num; i++) {
- int rxb_size = atomic_read(&sp->rx_bufs_left[i]);
- int level = rx_buffer_level(sp, rxb_size, i);
+ if (!sp->lro) {
+ int rxb_size = atomic_read(&sp->rx_bufs_left[i]);
+ int level = rx_buffer_level(sp, rxb_size, i);
- if ((level == PANIC) && (!TASKLET_IN_USE)) {
- DBG_PRINT(INTR_DBG, "%s: Rx BD hit ", dev->name);
- DBG_PRINT(INTR_DBG, "PANIC levels\n");
- if ((ret = fill_rx_buffers(sp, i)) == -ENOMEM) {
- DBG_PRINT(ERR_DBG, "%s:Out of memory",
- dev->name);
- DBG_PRINT(ERR_DBG, " in ISR!!\n");
+ if ((level == PANIC) && (!TASKLET_IN_USE)) {
+ DBG_PRINT(INTR_DBG, "%s: Rx BD hit ",
+ dev->name);
+ DBG_PRINT(INTR_DBG, "PANIC levels\n");
+ if ((ret = fill_rx_buffers(sp, i)) == -ENOMEM) {
+ DBG_PRINT(ERR_DBG, "%s:Out of memory",
+ dev->name);
+ DBG_PRINT(ERR_DBG, " in ISR!!\n");
+ clear_bit(0, (&sp->tasklet_status));
+ atomic_dec(&sp->isr_cnt);
+ return IRQ_HANDLED;
+ }
clear_bit(0, (&sp->tasklet_status));
- atomic_dec(&sp->isr_cnt);
- return IRQ_HANDLED;
+ } else if (level == LOW) {
+ tasklet_schedule(&sp->task);
}
- clear_bit(0, (&sp->tasklet_status));
- } else if (level == LOW) {
- tasklet_schedule(&sp->task);
+ }
+ else if (fill_rx_buffers(sp, i) == -ENOMEM) {
+ DBG_PRINT(ERR_DBG, "%s:Out of memory",
+ dev->name);
+ DBG_PRINT(ERR_DBG, " in Rx Intr!!\n");
+ break;
}
}
@@ -3697,29 +3748,37 @@
{
ring_info_t *ring = (ring_info_t *)dev_id;
nic_t *sp = ring->nic;
+ struct net_device *dev = (struct net_device *) dev_id;
int rxb_size, level, rng_n;
atomic_inc(&sp->isr_cnt);
rx_intr_handler(ring);
rng_n = ring->ring_no;
- rxb_size = atomic_read(&sp->rx_bufs_left[rng_n]);
- level = rx_buffer_level(sp, rxb_size, rng_n);
+ if (!sp->lro) {
+ rxb_size = atomic_read(&sp->rx_bufs_left[rng_n]);
+ level = rx_buffer_level(sp, rxb_size, rng_n);
- if ((level == PANIC) && (!TASKLET_IN_USE)) {
- int ret;
- DBG_PRINT(INTR_DBG, "%s: Rx BD hit ", __FUNCTION__);
- DBG_PRINT(INTR_DBG, "PANIC levels\n");
- if ((ret = fill_rx_buffers(sp, rng_n)) == -ENOMEM) {
- DBG_PRINT(ERR_DBG, "Out of memory in %s",
- __FUNCTION__);
+ if ((level == PANIC) && (!TASKLET_IN_USE)) {
+ int ret;
+ DBG_PRINT(INTR_DBG, "%s: Rx BD hit ", __FUNCTION__);
+ DBG_PRINT(INTR_DBG, "PANIC levels\n");
+ if ((ret = fill_rx_buffers(sp, rng_n)) == -ENOMEM) {
+ DBG_PRINT(ERR_DBG, "Out of memory in %s",
+ __FUNCTION__);
+ clear_bit(0, (&sp->tasklet_status));
+ return IRQ_HANDLED;
+ }
clear_bit(0, (&sp->tasklet_status));
- return IRQ_HANDLED;
+ } else if (level == LOW) {
+ tasklet_schedule(&sp->task);
}
- clear_bit(0, (&sp->tasklet_status));
- } else if (level == LOW) {
- tasklet_schedule(&sp->task);
}
+ else if (fill_rx_buffers(sp, rng_n) == -ENOMEM) {
+ DBG_PRINT(ERR_DBG, "%s:Out of memory", dev->name);
+ DBG_PRINT(ERR_DBG, " in Rx Intr!!\n");
+ }
+
atomic_dec(&sp->isr_cnt);
return IRQ_HANDLED;
@@ -3875,24 +3934,33 @@
*/
#ifndef CONFIG_S2IO_NAPI
for (i = 0; i < config->rx_ring_num; i++) {
- int ret;
- int rxb_size = atomic_read(&sp->rx_bufs_left[i]);
- int level = rx_buffer_level(sp, rxb_size, i);
+ if (!sp->lro) {
+ int ret;
+ int rxb_size = atomic_read(&sp->rx_bufs_left[i]);
+ int level = rx_buffer_level(sp, rxb_size, i);
- if ((level == PANIC) && (!TASKLET_IN_USE)) {
- DBG_PRINT(INTR_DBG, "%s: Rx BD hit ", dev->name);
- DBG_PRINT(INTR_DBG, "PANIC levels\n");
- if ((ret = fill_rx_buffers(sp, i)) == -ENOMEM) {
- DBG_PRINT(ERR_DBG, "%s:Out of memory",
- dev->name);
- DBG_PRINT(ERR_DBG, " in ISR!!\n");
+ if ((level == PANIC) && (!TASKLET_IN_USE)) {
+ DBG_PRINT(INTR_DBG, "%s: Rx BD hit ",
+ dev->name);
+ DBG_PRINT(INTR_DBG, "PANIC levels\n");
+ if ((ret = fill_rx_buffers(sp, i)) == -ENOMEM) {
+ DBG_PRINT(ERR_DBG, "%s:Out of memory",
+ dev->name);
+ DBG_PRINT(ERR_DBG, " in ISR!!\n");
+ clear_bit(0, (&sp->tasklet_status));
+ atomic_dec(&sp->isr_cnt);
+ return IRQ_HANDLED;
+ }
clear_bit(0, (&sp->tasklet_status));
- atomic_dec(&sp->isr_cnt);
- return IRQ_HANDLED;
+ } else if (level == LOW) {
+ tasklet_schedule(&sp->task);
}
- clear_bit(0, (&sp->tasklet_status));
- } else if (level == LOW) {
- tasklet_schedule(&sp->task);
+ }
+ else if (fill_rx_buffers(sp, i) == -ENOMEM) {
+ DBG_PRINT(ERR_DBG, "%s:Out of memory",
+ dev->name);
+ DBG_PRINT(ERR_DBG, " in Rx intr!!\n");
+ break;
}
}
#endif
@@ -4129,7 +4197,7 @@
* as defined in errno.h file on failure.
*/
-int s2io_set_mac_addr(struct net_device *dev, u8 * addr)
+static int s2io_set_mac_addr(struct net_device *dev, u8 * addr)
{
nic_t *sp = dev->priv;
XENA_dev_config_t __iomem *bar0 = sp->bar0;
@@ -5044,6 +5112,7 @@
int i = 0;
nic_t *sp = dev->priv;
StatInfo_t *stat_info = sp->mac_control.stats_info;
+ u64 tmp;
s2io_updt_stats(sp);
tmp_stats[i++] =
@@ -5135,6 +5204,16 @@
tmp_stats[i++] = 0;
tmp_stats[i++] = stat_info->sw_stat.single_ecc_errs;
tmp_stats[i++] = stat_info->sw_stat.double_ecc_errs;
+ tmp_stats[i++] = stat_info->sw_stat.clubbed_frms_cnt;
+ tmp_stats[i++] = stat_info->sw_stat.sending_both;
+ tmp_stats[i++] = stat_info->sw_stat.outof_sequence_pkts;
+ tmp_stats[i++] = stat_info->sw_stat.flush_max_pkts;
+ tmp = 0;
+ if (stat_info->sw_stat.num_aggregations) {
+ tmp = stat_info->sw_stat.sum_avg_pkts_aggregated;
+ do_div(tmp, stat_info->sw_stat.num_aggregations);
+ }
+ tmp_stats[i++] = tmp;
}
static int s2io_ethtool_get_regs_len(struct net_device *dev)
@@ -5516,6 +5595,14 @@
/* Setting its receive mode */
s2io_set_multicast(dev);
+ if (sp->lro) {
+ /* Initialize max aggregatable pkts based on MTU */
+ sp->lro_max_aggr_per_sess = ((1<<16) - 1) / dev->mtu;
+ /* Check if we can use(if specified) user provided value */
+ if (lro_max_pkts < sp->lro_max_aggr_per_sess)
+ sp->lro_max_aggr_per_sess = lro_max_pkts;
+ }
+
/* Enable tasklet for the device */
tasklet_init(&sp->task, s2io_tasklet, (unsigned long) dev);
@@ -5608,6 +5695,7 @@
((unsigned long) rxdp->Host_Control);
int ring_no = ring_data->ring_no;
u16 l3_csum, l4_csum;
+ lro_t *lro;
skb->dev = dev;
if (rxdp->Control_1 & RXD_T_CODE) {
@@ -5656,7 +5744,8 @@
skb_put(skb, buf2_len);
}
- if ((rxdp->Control_1 & TCP_OR_UDP_FRAME) &&
+ if ((rxdp->Control_1 & TCP_OR_UDP_FRAME) && ((!sp->lro) ||
+ (sp->lro && (!(rxdp->Control_1 & RXD_FRAME_IP_FRAG)))) &&
(sp->rx_csum)) {
l3_csum = RXD_GET_L3_CKSUM(rxdp->Control_1);
l4_csum = RXD_GET_L4_CKSUM(rxdp->Control_1);
@@ -5667,6 +5756,54 @@
* a flag in the RxD.
*/
skb->ip_summed = CHECKSUM_UNNECESSARY;
+ if (sp->lro) {
+ u32 tcp_len;
+ u8 *tcp;
+ int ret = 0;
+
+ ret = s2io_club_tcp_session(skb->data, &tcp,
+ &tcp_len, &lro, rxdp, sp);
+ switch (ret) {
+ case 3: /* Begin anew */
+ lro->parent = skb;
+ goto aggregate;
+ case 1: /* Aggregate */
+ {
+ lro_append_pkt(sp, lro,
+ skb, tcp_len);
+ goto aggregate;
+ }
+ case 4: /* Flush session */
+ {
+ lro_append_pkt(sp, lro,
+ skb, tcp_len);
+ queue_rx_frame(lro->parent);
+ clear_lro_session(lro);
+ sp->mac_control.stats_info->
+ sw_stat.flush_max_pkts++;
+ goto aggregate;
+ }
+ case 2: /* Flush both */
+ lro->parent->data_len =
+ lro->frags_len;
+ sp->mac_control.stats_info->
+ sw_stat.sending_both++;
+ queue_rx_frame(lro->parent);
+ clear_lro_session(lro);
+ goto send_up;
+ case 0: /* sessions exceeded */
+ case 5: /*
+ * First pkt in session not
+ * L3/L4 aggregatable
+ */
+ break;
+ default:
+ DBG_PRINT(ERR_DBG,
+ "%s: Samadhana!!\n",
+ __FUNCTION__);
+ BUG();
+ }
+ }
} else {
/*
* Packet with erroneous checksum, let the
@@ -5678,25 +5815,31 @@
skb->ip_summed = CHECKSUM_NONE;
}
- skb->protocol = eth_type_trans(skb, dev);
+ if (!sp->lro) {
+ skb->protocol = eth_type_trans(skb, dev);
#ifdef CONFIG_S2IO_NAPI
- if (sp->vlgrp && RXD_GET_VLAN_TAG(rxdp->Control_2)) {
- /* Queueing the vlan frame to the upper layer */
- vlan_hwaccel_receive_skb(skb, sp->vlgrp,
- RXD_GET_VLAN_TAG(rxdp->Control_2));
- } else {
- netif_receive_skb(skb);
- }
+ if (sp->vlgrp && RXD_GET_VLAN_TAG(rxdp->Control_2)) {
+ /* Queueing the vlan frame to the upper layer */
+ vlan_hwaccel_receive_skb(skb, sp->vlgrp,
+ RXD_GET_VLAN_TAG(rxdp->Control_2));
+ } else {
+ netif_receive_skb(skb);
+ }
#else
- if (sp->vlgrp && RXD_GET_VLAN_TAG(rxdp->Control_2)) {
- /* Queueing the vlan frame to the upper layer */
- vlan_hwaccel_rx(skb, sp->vlgrp,
- RXD_GET_VLAN_TAG(rxdp->Control_2));
- } else {
- netif_rx(skb);
- }
+ if (sp->vlgrp && RXD_GET_VLAN_TAG(rxdp->Control_2)) {
+ /* Queueing the vlan frame to the upper layer */
+ vlan_hwaccel_rx(skb, sp->vlgrp,
+ RXD_GET_VLAN_TAG(rxdp->Control_2));
+ } else {
+ netif_rx(skb);
+ }
#endif
+ } else {
+send_up:
+ queue_rx_frame(skb);
+ }
dev->last_rx = jiffies;
+aggregate:
atomic_dec(&sp->rx_bufs_left[ring_no]);
return SUCCESS;
}
@@ -5714,7 +5857,7 @@
* void.
*/
-void s2io_link(nic_t * sp, int link)
+static void s2io_link(nic_t * sp, int link)
{
struct net_device *dev = (struct net_device *) sp->dev;
@@ -5739,7 +5882,7 @@
* returns the revision ID of the device.
*/
-int get_xena_rev_id(struct pci_dev *pdev)
+static int get_xena_rev_id(struct pci_dev *pdev)
{
u8 id = 0;
int ret;
@@ -5808,6 +5951,8 @@
#endif
module_param(rxsync_frequency, int, 0);
module_param(intr_type, int, 0);
+module_param(lro, int, 0);
+module_param(lro_max_pkts, int, 0);
/**
* s2io_init_nic - Initialization of the adapter .
@@ -5939,6 +6084,7 @@
else
sp->device_type = XFRAME_I_DEVICE;
+ sp->lro = lro;
/* Initialize some PCI/PCI-X fields of the NIC. */
s2io_init_pci(sp);
@@ -6242,6 +6388,10 @@
DBG_PRINT(ERR_DBG, "%s: 3-Buffer mode support has been "
"enabled\n",dev->name);
+ if (sp->lro)
+ DBG_PRINT(ERR_DBG, "%s: Large receive offload enabled\n",
+ dev->name);
+
/* Initialize device name */
strcpy(sp->name, dev->name);
if (sp->device_type & XFRAME_II_DEVICE)
@@ -6344,7 +6494,7 @@
* Description: This function is the cleanup routine for the driver. It unregist * ers the driver.
*/
-void s2io_closer(void)
+static void s2io_closer(void)
{
pci_unregister_driver(&s2io_driver);
DBG_PRINT(INIT_DBG, "cleanup done\n");
@@ -6352,3 +6502,318 @@
module_init(s2io_starter);
module_exit(s2io_closer);
+
+static int check_L2_lro_capable(u8 *buffer, struct iphdr **ip,
+ struct tcphdr **tcp, RxD_t *rxdp)
+{
+ int ip_off;
+ u8 l2_type = (u8)((rxdp->Control_1 >> 37) & 0x7), ip_len;
+
+ if (!(rxdp->Control_1 & RXD_FRAME_PROTO_TCP)) {
+ DBG_PRINT(INIT_DBG,"%s: Non-TCP frames not supported for LRO\n",
+ __FUNCTION__);
+ return -1;
+ }
+
+ /* TODO:
+ * By default the VLAN field in the MAC is stripped by the card, if this
+ * feature is turned off in rx_pa_cfg register, then the ip_off field
+ * has to be shifted by a further 2 bytes
+ */
+ switch (l2_type) {
+ case 0: /* DIX type */
+ case 4: /* DIX type with VLAN */
+ ip_off = HEADER_ETHERNET_II_802_3_SIZE;
+ break;
+ /* LLC, SNAP etc are considered non-mergeable */
+ default:
+ return -1;
+ }
+
+ *ip = (struct iphdr *)((u8 *)buffer + ip_off);
+ ip_len = (u8)((*ip)->ihl);
+ ip_len <<= 2;
+ *tcp = (struct tcphdr *)((unsigned long)*ip + ip_len);
+
+ return 0;
+}
+
+static int check_for_socket_match(lro_t *lro, struct iphdr *ip,
+ struct tcphdr *tcp)
+{
+ DBG_PRINT(INFO_DBG,"%s: Been here...\n", __FUNCTION__);
+ if ((lro->iph->saddr != ip->saddr) || (lro->iph->daddr != ip->daddr) ||
+ (lro->tcph->source != tcp->source) || (lro->tcph->dest != tcp->dest))
+ return -1;
+ return 0;
+}
+
+static inline int get_l4_pyld_length(struct iphdr *ip, struct tcphdr *tcp)
+{
+ return(ntohs(ip->tot_len) - (ip->ihl << 2) - (tcp->doff << 2));
+}
+
+static void initiate_new_session(lro_t *lro, u8 *l2h,
+ struct iphdr *ip, struct tcphdr *tcp, u32 tcp_pyld_len)
+{
+ DBG_PRINT(INFO_DBG,"%s: Been here...\n", __FUNCTION__);
+ lro->l2h = l2h;
+ lro->iph = ip;
+ lro->tcph = tcp;
+ lro->tcp_next_seq = tcp_pyld_len + ntohl(tcp->seq);
+ lro->tcp_ack = ntohl(tcp->ack_seq);
+ lro->sg_num = 1;
+ lro->total_len = ntohs(ip->tot_len);
+ lro->frags_len = 0;
+ /*
+ * check if we saw TCP timestamp. Other consistency checks have
+ * already been done.
+ */
+ if (tcp->doff == 8) {
+ u32 *ptr;
+ ptr = (u32 *)(tcp+1);
+ lro->saw_ts = 1;
+ lro->cur_tsval = *(ptr+1);
+ lro->cur_tsecr = *(ptr+2);
+ }
+ lro->in_use = 1;
+}
+
+static void update_L3L4_header(nic_t *sp, lro_t *lro)
+{
+ struct iphdr *ip = lro->iph;
+ struct tcphdr *tcp = lro->tcph;
+ u16 nchk;
+ StatInfo_t *statinfo = sp->mac_control.stats_info;
+ DBG_PRINT(INFO_DBG,"%s: Been here...\n", __FUNCTION__);
+
+ /* Update L3 header */
+ ip->tot_len = htons(lro->total_len);
+ ip->check = 0;
+ nchk = ip_fast_csum((u8 *)lro->iph, ip->ihl);
+ ip->check = nchk;
+
+ /* Update L4 header */
+ tcp->ack_seq = lro->tcp_ack;
+ tcp->window = lro->window;
+
+ /* Update tsecr field if this session has timestamps enabled */
+ if (lro->saw_ts) {
+ u32 *ptr = (u32 *)(tcp + 1);
+ *(ptr+2) = lro->cur_tsecr;
+ }
+
+ /* Update counters required for calculation of
+ * average no. of packets aggregated.
+ */
+ statinfo->sw_stat.sum_avg_pkts_aggregated += lro->sg_num;
+ statinfo->sw_stat.num_aggregations++;
+}
+
+static void aggregate_new_rx(lro_t *lro, struct iphdr *ip,
+ struct tcphdr *tcp, u32 l4_pyld)
+{
+ DBG_PRINT(INFO_DBG,"%s: Been here...\n", __FUNCTION__);
+ lro->total_len += l4_pyld;
+ lro->frags_len += l4_pyld;
+ lro->tcp_next_seq += l4_pyld;
+ lro->sg_num++;
+
+ /* Update ack seq no. and window ad(from this pkt) in LRO object */
+ lro->tcp_ack = tcp->ack_seq;
+ lro->window = tcp->window;
+
+ if (lro->saw_ts) {
+ u32 *ptr;
+ /* Update tsecr and tsval from this packet */
+ ptr = (u32 *) (tcp + 1);
+ lro->cur_tsval = *(ptr + 1);
+ lro->cur_tsecr = *(ptr + 2);
+ }
+}
+
+static int verify_l3_l4_lro_capable(lro_t *l_lro, struct iphdr *ip,
+ struct tcphdr *tcp, u32 tcp_pyld_len)
+{
+ u8 *ptr;
+
+ DBG_PRINT(INFO_DBG,"%s: Been here...\n", __FUNCTION__);
+
+ if (!tcp_pyld_len) {
+ /* Runt frame or a pure ack */
+ return -1;
+ }
+
+ if (ip->ihl != 5) /* IP has options */
+ return -1;
+
+ if (tcp->urg || tcp->psh || tcp->rst || tcp->syn || tcp->fin ||
+ !tcp->ack) {
+ /*
+ * Currently recognize only the ack control word and
+ * any other control field being set would result in
+ * flushing the LRO session
+ */
+ return -1;
+ }
+
+ /*
+ * Allow only one TCP timestamp option. Don't aggregate if
+ * any other options are detected.
+ */
+ if (tcp->doff != 5 && tcp->doff != 8)
+ return -1;
+
+ if (tcp->doff == 8) {
+ ptr = (u8 *)(tcp + 1);
+ while (*ptr == TCPOPT_NOP)
+ ptr++;
+ if (*ptr != TCPOPT_TIMESTAMP || *(ptr+1) != TCPOLEN_TIMESTAMP)
+ return -1;
+
+ /* Ensure timestamp value increases monotonically */
+ if (l_lro)
+ if (l_lro->cur_tsval > *((u32 *)(ptr+2)))
+ return -1;
+
+ /* timestamp echo reply should be non-zero */
+ if (*((u32 *)(ptr+6)) == 0)
+ return -1;
+ }
+
+ return 0;
+}
+
+static int
+s2io_club_tcp_session(u8 *buffer, u8 **tcp, u32 *tcp_len, lro_t **lro,
+ RxD_t *rxdp, nic_t *sp)
+{
+ struct iphdr *ip;
+ struct tcphdr *tcph;
+ int ret = 0, i;
+
+ if (!(ret = check_L2_lro_capable(buffer, &ip, (struct tcphdr **)tcp,
+ rxdp))) {
+ DBG_PRINT(INFO_DBG,"IP Saddr: %x Daddr: %x\n",
+ ip->saddr, ip->daddr);
+ } else {
+ return ret;
+ }
+
+ tcph = (struct tcphdr *)*tcp;
+ *tcp_len = get_l4_pyld_length(ip, tcph);
+ for (i=0; i<MAX_LRO_SESSIONS; i++) {
+ lro_t *l_lro = &sp->lro0_n[i];
+ if (l_lro->in_use) {
+ if (check_for_socket_match(l_lro, ip, tcph))
+ continue;
+ /* Sock pair matched */
+ *lro = l_lro;
+
+ if ((*lro)->tcp_next_seq != ntohl(tcph->seq)) {
+ DBG_PRINT(INFO_DBG, "%s:Out of order. expected "
+ "0x%x, actual 0x%x\n", __FUNCTION__,
+ (*lro)->tcp_next_seq,
+ ntohl(tcph->seq));
+
+ sp->mac_control.stats_info->
+ sw_stat.outof_sequence_pkts++;
+ ret = 2;
+ break;
+ }
+
+ if (!verify_l3_l4_lro_capable(l_lro, ip, tcph,*tcp_len))
+ ret = 1; /* Aggregate */
+ else
+ ret = 2; /* Flush both */
+ break;
+ }
+ }
+
+ if (ret == 0) {
+ /* Before searching for available LRO objects,
+ * check if the pkt is L3/L4 aggregatable. If not
+ * don't create new LRO session. Just send this
+ * packet up.
+ */
+ if (verify_l3_l4_lro_capable(NULL, ip, tcph, *tcp_len)) {
+ return 5;
+ }
+
+ for (i=0; i<MAX_LRO_SESSIONS; i++) {
+ lro_t *l_lro = &sp->lro0_n[i];
+ if (!(l_lro->in_use)) {
+ *lro = l_lro;
+ ret = 3; /* Begin anew */
+ break;
+ }
+ }
+ }
+
+ if (ret == 0) { /* sessions exceeded */
+ DBG_PRINT(INFO_DBG,"%s:All LRO sessions already in use\n",
+ __FUNCTION__);
+ *lro = NULL;
+ return ret;
+ }
+
+ switch (ret) {
+ case 3:
+ initiate_new_session(*lro, buffer, ip, tcph, *tcp_len);
+ break;
+ case 2:
+ update_L3L4_header(sp, *lro);
+ break;
+ case 1:
+ aggregate_new_rx(*lro, ip, tcph, *tcp_len);
+ if ((*lro)->sg_num == sp->lro_max_aggr_per_sess) {
+ update_L3L4_header(sp, *lro);
+ ret = 4; /* Flush the LRO */
+ }
+ break;
+ default:
+ DBG_PRINT(ERR_DBG,"%s:Dont know, can't say!!\n",
+ __FUNCTION__);
+ break;
+ }
+
+ return ret;
+}
+
+static void clear_lro_session(lro_t *lro)
+{
+ static u16 lro_struct_size = sizeof(lro_t);
+
+ memset(lro, 0, lro_struct_size);
+}
+
+static void queue_rx_frame(struct sk_buff *skb)
+{
+ struct net_device *dev = skb->dev;
+
+ skb->protocol = eth_type_trans(skb, dev);
+#ifdef CONFIG_S2IO_NAPI
+ netif_receive_skb(skb);
+#else
+ netif_rx(skb);
+#endif
+}
+
+static void lro_append_pkt(nic_t *sp, lro_t *lro, struct sk_buff *skb,
+ u32 tcp_len)
+{
+ struct sk_buff *tmp, *first = lro->parent;
+
+ first->len += tcp_len;
+ first->data_len = lro->frags_len;
+ skb_pull(skb, (skb->len - tcp_len));
+ if ((tmp = skb_shinfo(first)->frag_list)) {
+ while (tmp->next)
+ tmp = tmp->next;
+ tmp->next = skb;
+ }
+ else
+ skb_shinfo(first)->frag_list = skb;
+ sp->mac_control.stats_info->sw_stat.clubbed_frms_cnt++;
+ return;
+}
diff --git a/drivers/net/s2io.h b/drivers/net/s2io.h
index 852a6a8..0a0b5b2 100644
--- a/drivers/net/s2io.h
+++ b/drivers/net/s2io.h
@@ -64,7 +64,7 @@
#define INTR_DBG 4
/* Global variable that defines the present debug level of the driver. */
-int debug_level = ERR_DBG; /* Default level. */
+static int debug_level = ERR_DBG;
/* DEBUG message print. */
#define DBG_PRINT(dbg_level, args...) if(!(debug_level<dbg_level)) printk(args)
@@ -78,6 +78,13 @@
typedef struct {
unsigned long long single_ecc_errs;
unsigned long long double_ecc_errs;
+ /* LRO statistics */
+ unsigned long long clubbed_frms_cnt;
+ unsigned long long sending_both;
+ unsigned long long outof_sequence_pkts;
+ unsigned long long flush_max_pkts;
+ unsigned long long sum_avg_pkts_aggregated;
+ unsigned long long num_aggregations;
} swStat_t;
/* The statistics block of Xena */
@@ -268,7 +275,7 @@
#define MAX_RX_RINGS 8
/* FIFO mappings for all possible number of fifos configured */
-int fifo_map[][MAX_TX_FIFOS] = {
+static int fifo_map[][MAX_TX_FIFOS] = {
{0, 0, 0, 0, 0, 0, 0, 0},
{0, 0, 0, 0, 1, 1, 1, 1},
{0, 0, 0, 1, 1, 1, 2, 2},
@@ -680,6 +687,24 @@
u64 data;
};
+/* Data structure to represent a LRO session */
+typedef struct lro {
+ struct sk_buff *parent;
+ u8 *l2h;
+ struct iphdr *iph;
+ struct tcphdr *tcph;
+ u32 tcp_next_seq;
+ u32 tcp_ack;
+ int total_len;
+ int frags_len;
+ int sg_num;
+ int in_use;
+ u16 window;
+ u32 cur_tsval;
+ u32 cur_tsecr;
+ u8 saw_ts;
+}lro_t;
+
/* Structure representing one instance of the NIC */
struct s2io_nic {
int rxd_mode;
@@ -784,6 +809,13 @@
#define XFRAME_II_DEVICE 2
u8 device_type;
+#define MAX_LRO_SESSIONS 32
+ lro_t lro0_n[MAX_LRO_SESSIONS];
+ unsigned long clubbed_frms_cnt;
+ unsigned long sending_both;
+ u8 lro;
+ u16 lro_max_aggr_per_sess;
+
#define INTA 0
#define MSI 1
#define MSI_X 2
@@ -911,18 +943,16 @@
static void alarm_intr_handler(struct s2io_nic *sp);
static int s2io_starter(void);
-void s2io_closer(void);
static void s2io_tx_watchdog(struct net_device *dev);
static void s2io_tasklet(unsigned long dev_addr);
static void s2io_set_multicast(struct net_device *dev);
static int rx_osm_handler(ring_info_t *ring_data, RxD_t * rxdp);
-void s2io_link(nic_t * sp, int link);
-void s2io_reset(nic_t * sp);
+static void s2io_link(nic_t * sp, int link);
#if defined(CONFIG_S2IO_NAPI)
static int s2io_poll(struct net_device *dev, int *budget);
#endif
static void s2io_init_pci(nic_t * sp);
-int s2io_set_mac_addr(struct net_device *dev, u8 * addr);
+static int s2io_set_mac_addr(struct net_device *dev, u8 * addr);
static void s2io_alarm_handle(unsigned long data);
static int s2io_enable_msi(nic_t *nic);
static irqreturn_t s2io_msi_handle(int irq, void *dev_id, struct pt_regs *regs);
@@ -930,14 +960,19 @@
s2io_msix_ring_handle(int irq, void *dev_id, struct pt_regs *regs);
static irqreturn_t
s2io_msix_fifo_handle(int irq, void *dev_id, struct pt_regs *regs);
-int s2io_enable_msi_x(nic_t *nic);
static irqreturn_t s2io_isr(int irq, void *dev_id, struct pt_regs *regs);
static int verify_xena_quiescence(nic_t *sp, u64 val64, int flag);
static struct ethtool_ops netdev_ethtool_ops;
static void s2io_set_link(unsigned long data);
-int s2io_set_swapper(nic_t * sp);
+static int s2io_set_swapper(nic_t * sp);
static void s2io_card_down(nic_t *nic);
static int s2io_card_up(nic_t *nic);
-int get_xena_rev_id(struct pci_dev *pdev);
-void restore_xmsi_data(nic_t *nic);
+static int get_xena_rev_id(struct pci_dev *pdev);
+static void restore_xmsi_data(nic_t *nic);
+
+static int s2io_club_tcp_session(u8 *buffer, u8 **tcp, u32 *tcp_len, lro_t **lro, RxD_t *rxdp, nic_t *sp);
+static void clear_lro_session(lro_t *lro);
+static void queue_rx_frame(struct sk_buff *skb);
+static void update_L3L4_header(nic_t *sp, lro_t *lro);
+static void lro_append_pkt(nic_t *sp, lro_t *lro, struct sk_buff *skb, u32 tcp_len);
#endif /* _S2IO_H */
diff --git a/drivers/net/sb1000.c b/drivers/net/sb1000.c
index 7613947..66cf226 100644
--- a/drivers/net/sb1000.c
+++ b/drivers/net/sb1000.c
@@ -59,7 +59,7 @@
#ifdef SB1000_DEBUG
static int sb1000_debug = SB1000_DEBUG;
#else
-static int sb1000_debug = 1;
+static const int sb1000_debug = 1;
#endif
static const int SB1000_IO_EXTENT = 8;
diff --git a/drivers/net/sb1250-mac.c b/drivers/net/sb1250-mac.c
index aa4ca18..f2be9f8 100644
--- a/drivers/net/sb1250-mac.c
+++ b/drivers/net/sb1250-mac.c
@@ -1,5 +1,5 @@
/*
- * Copyright (C) 2001,2002,2003 Broadcom Corporation
+ * Copyright (C) 2001,2002,2003,2004 Broadcom Corporation
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
@@ -43,6 +43,7 @@
#define SBMAC_ETH0_HWADDR "40:00:00:00:01:00"
#define SBMAC_ETH1_HWADDR "40:00:00:00:01:01"
#define SBMAC_ETH2_HWADDR "40:00:00:00:01:02"
+#define SBMAC_ETH3_HWADDR "40:00:00:00:01:03"
#endif
@@ -57,7 +58,7 @@
#define CONFIG_SBMAC_COALESCE
-#define MAX_UNITS 3 /* More are supported, limit only on options */
+#define MAX_UNITS 4 /* More are supported, limit only on options */
/* Time in jiffies before concluding the transmitter is hung. */
#define TX_TIMEOUT (2*HZ)
@@ -85,11 +86,11 @@
The media type is usually passed in 'options[]'.
*/
#ifdef MODULE
-static int options[MAX_UNITS] = {-1, -1, -1};
+static int options[MAX_UNITS] = {-1, -1, -1, -1};
module_param_array(options, int, NULL, S_IRUGO);
MODULE_PARM_DESC(options, "1-" __MODULE_STRING(MAX_UNITS));
-static int full_duplex[MAX_UNITS] = {-1, -1, -1};
+static int full_duplex[MAX_UNITS] = {-1, -1, -1, -1};
module_param_array(full_duplex, int, NULL, S_IRUGO);
MODULE_PARM_DESC(full_duplex, "1-" __MODULE_STRING(MAX_UNITS));
#endif
@@ -105,13 +106,26 @@
#endif
#include <asm/sibyte/sb1250.h>
-#include <asm/sibyte/sb1250_defs.h>
+#if defined(CONFIG_SIBYTE_BCM1x55) || defined(CONFIG_SIBYTE_BCM1x80)
+#include <asm/sibyte/bcm1480_regs.h>
+#include <asm/sibyte/bcm1480_int.h>
+#elif defined(CONFIG_SIBYTE_SB1250) || defined(CONFIG_SIBYTE_BCM112X)
#include <asm/sibyte/sb1250_regs.h>
+#include <asm/sibyte/sb1250_int.h>
+#else
+#error invalid SiByte MAC configuation
+#endif
+#include <asm/sibyte/sb1250_scd.h>
#include <asm/sibyte/sb1250_mac.h>
#include <asm/sibyte/sb1250_dma.h>
-#include <asm/sibyte/sb1250_int.h>
-#include <asm/sibyte/sb1250_scd.h>
+#if defined(CONFIG_SIBYTE_BCM1x55) || defined(CONFIG_SIBYTE_BCM1x80)
+#define UNIT_INT(n) (K_BCM1480_INT_MAC_0 + ((n) * 2))
+#elif defined(CONFIG_SIBYTE_SB1250) || defined(CONFIG_SIBYTE_BCM112X)
+#define UNIT_INT(n) (K_INT_MAC_0 + (n))
+#else
+#error invalid SiByte MAC configuation
+#endif
/**********************************************************************
* Simple types
@@ -1476,10 +1490,10 @@
* and make sure that RD_THRSH + WR_THRSH <=128 for pass2 and above
* Use a larger RD_THRSH for gigabit
*/
- if (periph_rev >= 2)
- th_value = 64;
- else
+ if (soc_type == K_SYS_SOC_TYPE_BCM1250 && periph_rev < 2)
th_value = 28;
+ else
+ th_value = 64;
fifo = V_MAC_TX_WR_THRSH(4) | /* Must be '4' or '8' */
((s->sbm_speed == sbmac_speed_1000)
@@ -1589,13 +1603,17 @@
* Turn on the rest of the bits in the enable register
*/
+#if defined(CONFIG_SIBYTE_BCM1x55) || defined(CONFIG_SIBYTE_BCM1x80)
+ __raw_writeq(M_MAC_RXDMA_EN0 |
+ M_MAC_TXDMA_EN0, s->sbm_macenable);
+#elif defined(CONFIG_SIBYTE_SB1250) || defined(CONFIG_SIBYTE_BCM112X)
__raw_writeq(M_MAC_RXDMA_EN0 |
M_MAC_TXDMA_EN0 |
M_MAC_RX_ENABLE |
M_MAC_TX_ENABLE, s->sbm_macenable);
-
-
-
+#else
+#error invalid SiByte MAC configuation
+#endif
#ifdef CONFIG_SBMAC_COALESCE
/*
@@ -1786,11 +1804,12 @@
reg &= ~M_MAC_IPHDR_OFFSET | V_MAC_IPHDR_OFFSET(15);
__raw_writeq(reg, sc->sbm_rxfilter);
- /* read system identification to determine revision */
- if (periph_rev >= 2) {
- sc->rx_hw_checksum = ENABLE;
- } else {
+ /* BCM1250 pass1 didn't have hardware checksum. Everything
+ later does. */
+ if (soc_type == K_SYS_SOC_TYPE_BCM1250 && periph_rev < 2) {
sc->rx_hw_checksum = DISABLE;
+ } else {
+ sc->rx_hw_checksum = ENABLE;
}
}
@@ -2220,7 +2239,7 @@
-#if defined(SBMAC_ETH0_HWADDR) || defined(SBMAC_ETH1_HWADDR) || defined(SBMAC_ETH2_HWADDR)
+#if defined(SBMAC_ETH0_HWADDR) || defined(SBMAC_ETH1_HWADDR) || defined(SBMAC_ETH2_HWADDR) || defined(SBMAC_ETH3_HWADDR)
/**********************************************************************
* SBMAC_PARSE_XDIGIT(str)
*
@@ -2792,7 +2811,7 @@
-#if defined(SBMAC_ETH0_HWADDR) || defined(SBMAC_ETH1_HWADDR) || defined(SBMAC_ETH2_HWADDR)
+#if defined(SBMAC_ETH0_HWADDR) || defined(SBMAC_ETH1_HWADDR) || defined(SBMAC_ETH2_HWADDR) || defined(SBMAC_ETH3_HWADDR)
static void
sbmac_setup_hwaddr(int chan,char *addr)
{
@@ -2818,25 +2837,7 @@
unsigned long port;
int chip_max_units;
- /*
- * For bringup when not using the firmware, we can pre-fill
- * the MAC addresses using the environment variables
- * specified in this file (or maybe from the config file?)
- */
-#ifdef SBMAC_ETH0_HWADDR
- sbmac_setup_hwaddr(0,SBMAC_ETH0_HWADDR);
-#endif
-#ifdef SBMAC_ETH1_HWADDR
- sbmac_setup_hwaddr(1,SBMAC_ETH1_HWADDR);
-#endif
-#ifdef SBMAC_ETH2_HWADDR
- sbmac_setup_hwaddr(2,SBMAC_ETH2_HWADDR);
-#endif
-
- /*
- * Walk through the Ethernet controllers and find
- * those who have their MAC addresses set.
- */
+ /* Set the number of available units based on the SOC type. */
switch (soc_type) {
case K_SYS_SOC_TYPE_BCM1250:
case K_SYS_SOC_TYPE_BCM1250_ALT:
@@ -2848,6 +2849,10 @@
case K_SYS_SOC_TYPE_BCM1250_ALT2: /* Hybrid */
chip_max_units = 2;
break;
+ case K_SYS_SOC_TYPE_BCM1x55:
+ case K_SYS_SOC_TYPE_BCM1x80:
+ chip_max_units = 4;
+ break;
default:
chip_max_units = 0;
break;
@@ -2855,6 +2860,32 @@
if (chip_max_units > MAX_UNITS)
chip_max_units = MAX_UNITS;
+ /*
+ * For bringup when not using the firmware, we can pre-fill
+ * the MAC addresses using the environment variables
+ * specified in this file (or maybe from the config file?)
+ */
+#ifdef SBMAC_ETH0_HWADDR
+ if (chip_max_units > 0)
+ sbmac_setup_hwaddr(0,SBMAC_ETH0_HWADDR);
+#endif
+#ifdef SBMAC_ETH1_HWADDR
+ if (chip_max_units > 1)
+ sbmac_setup_hwaddr(1,SBMAC_ETH1_HWADDR);
+#endif
+#ifdef SBMAC_ETH2_HWADDR
+ if (chip_max_units > 2)
+ sbmac_setup_hwaddr(2,SBMAC_ETH2_HWADDR);
+#endif
+#ifdef SBMAC_ETH3_HWADDR
+ if (chip_max_units > 3)
+ sbmac_setup_hwaddr(3,SBMAC_ETH3_HWADDR);
+#endif
+
+ /*
+ * Walk through the Ethernet controllers and find
+ * those who have their MAC addresses set.
+ */
for (idx = 0; idx < chip_max_units; idx++) {
/*
@@ -2886,7 +2917,7 @@
printk(KERN_DEBUG "sbmac: configuring MAC at %lx\n", port);
- dev->irq = K_INT_MAC_0 + idx;
+ dev->irq = UNIT_INT(idx);
dev->base_addr = port;
dev->mem_end = 0;
if (sbmac_init(dev, idx)) {
diff --git a/drivers/net/seeq8005.c b/drivers/net/seeq8005.c
index 79dca39..bcef03f 100644
--- a/drivers/net/seeq8005.c
+++ b/drivers/net/seeq8005.c
@@ -46,6 +46,7 @@
#include <linux/etherdevice.h>
#include <linux/skbuff.h>
#include <linux/bitops.h>
+#include <linux/jiffies.h>
#include <asm/system.h>
#include <asm/io.h>
@@ -699,7 +700,7 @@
int ioaddr = dev->base_addr;
int status = inw(SEEQ_STATUS);
int transmit_ptr = 0;
- int tmp;
+ unsigned long tmp;
if (net_debug>4) {
printk("%s: send 0x%04x\n",dev->name,length);
@@ -724,7 +725,7 @@
/* drain FIFO */
tmp = jiffies;
- while ( (((status=inw(SEEQ_STATUS)) & SEEQSTAT_FIFO_EMPTY) == 0) && (jiffies - tmp < HZ))
+ while ( (((status=inw(SEEQ_STATUS)) & SEEQSTAT_FIFO_EMPTY) == 0) && time_before(jiffies, tmp + HZ))
mb();
/* doit ! */
diff --git a/drivers/net/shaper.c b/drivers/net/shaper.c
index 221354e..88e2120 100644
--- a/drivers/net/shaper.c
+++ b/drivers/net/shaper.c
@@ -83,6 +83,7 @@
#include <linux/if_arp.h>
#include <linux/init.h>
#include <linux/if_shaper.h>
+#include <linux/jiffies.h>
#include <net/dst.h>
#include <net/arp.h>
@@ -168,7 +169,7 @@
/*
* Queue over time. Spill packet.
*/
- if(SHAPERCB(skb)->shapeclock-jiffies > SHAPER_LATENCY) {
+ if(time_after(SHAPERCB(skb)->shapeclock,jiffies + SHAPER_LATENCY)) {
dev_kfree_skb(skb);
shaper->stats.tx_dropped++;
} else
diff --git a/drivers/net/sis190.c b/drivers/net/sis190.c
index ed4bc91..31dd3f0 100644
--- a/drivers/net/sis190.c
+++ b/drivers/net/sis190.c
@@ -366,7 +366,7 @@
* Maximum number of multicast addresses to filter (vs. Rx-all-multicast).
* The chips use a 64 element hash table based on the Ethernet CRC.
*/
-static int multicast_filter_limit = 32;
+static const int multicast_filter_limit = 32;
static void __mdio_cmd(void __iomem *ioaddr, u32 ctl)
{
diff --git a/drivers/net/sis900.c b/drivers/net/sis900.c
index 7a952fe..a1cb07c 100644
--- a/drivers/net/sis900.c
+++ b/drivers/net/sis900.c
@@ -100,7 +100,7 @@
SIS_900 = 0,
SIS_7016
};
-static char * card_names[] = {
+static const char * card_names[] = {
"SiS 900 PCI Fast Ethernet",
"SiS 7016 PCI Fast Ethernet"
};
@@ -115,7 +115,7 @@
static void sis900_read_mode(struct net_device *net_dev, int *speed, int *duplex);
-static struct mii_chip_info {
+static const struct mii_chip_info {
const char * name;
u16 phy_id0;
u16 phy_id1;
@@ -400,7 +400,7 @@
void *ring_space;
long ioaddr;
int i, ret;
- char *card_name = card_names[pci_id->driver_data];
+ const char *card_name = card_names[pci_id->driver_data];
const char *dev_name = pci_name(pci_dev);
/* when built into the kernel, we only print version if device is found */
@@ -1275,7 +1275,7 @@
struct net_device *net_dev = (struct net_device *)data;
struct sis900_private *sis_priv = net_dev->priv;
struct mii_phy *mii_phy = sis_priv->mii;
- static int next_tick = 5*HZ;
+ static const int next_tick = 5*HZ;
u16 status;
if (!sis_priv->autong_complete){
diff --git a/drivers/net/sk98lin/h/skaddr.h b/drivers/net/sk98lin/h/skaddr.h
index 3a2ea4a..423ad06 100644
--- a/drivers/net/sk98lin/h/skaddr.h
+++ b/drivers/net/sk98lin/h/skaddr.h
@@ -236,18 +236,6 @@
SK_U32 PortNumber,
int Flags);
-extern int SkAddrXmacMcClear(
- SK_AC *pAC,
- SK_IOC IoC,
- SK_U32 PortNumber,
- int Flags);
-
-extern int SkAddrGmacMcClear(
- SK_AC *pAC,
- SK_IOC IoC,
- SK_U32 PortNumber,
- int Flags);
-
extern int SkAddrMcAdd(
SK_AC *pAC,
SK_IOC IoC,
@@ -255,35 +243,11 @@
SK_MAC_ADDR *pMc,
int Flags);
-extern int SkAddrXmacMcAdd(
- SK_AC *pAC,
- SK_IOC IoC,
- SK_U32 PortNumber,
- SK_MAC_ADDR *pMc,
- int Flags);
-
-extern int SkAddrGmacMcAdd(
- SK_AC *pAC,
- SK_IOC IoC,
- SK_U32 PortNumber,
- SK_MAC_ADDR *pMc,
- int Flags);
-
extern int SkAddrMcUpdate(
SK_AC *pAC,
SK_IOC IoC,
SK_U32 PortNumber);
-extern int SkAddrXmacMcUpdate(
- SK_AC *pAC,
- SK_IOC IoC,
- SK_U32 PortNumber);
-
-extern int SkAddrGmacMcUpdate(
- SK_AC *pAC,
- SK_IOC IoC,
- SK_U32 PortNumber);
-
extern int SkAddrOverride(
SK_AC *pAC,
SK_IOC IoC,
@@ -297,18 +261,6 @@
SK_U32 PortNumber,
int NewPromMode);
-extern int SkAddrXmacPromiscuousChange(
- SK_AC *pAC,
- SK_IOC IoC,
- SK_U32 PortNumber,
- int NewPromMode);
-
-extern int SkAddrGmacPromiscuousChange(
- SK_AC *pAC,
- SK_IOC IoC,
- SK_U32 PortNumber,
- int NewPromMode);
-
#ifndef SK_SLIM
extern int SkAddrSwap(
SK_AC *pAC,
diff --git a/drivers/net/sk98lin/h/skcsum.h b/drivers/net/sk98lin/h/skcsum.h
index 2b94adb..6e256bd 100644
--- a/drivers/net/sk98lin/h/skcsum.h
+++ b/drivers/net/sk98lin/h/skcsum.h
@@ -203,12 +203,6 @@
unsigned Checksum2,
int NetNumber);
-extern void SkCsGetSendInfo(
- SK_AC *pAc,
- void *pIpHeader,
- SKCS_PACKET_INFO *pPacketInfo,
- int NetNumber);
-
extern void SkCsSetReceiveFlags(
SK_AC *pAc,
unsigned ReceiveFlags,
diff --git a/drivers/net/sk98lin/h/skgeinit.h b/drivers/net/sk98lin/h/skgeinit.h
index 184f47c..143e635 100644
--- a/drivers/net/sk98lin/h/skgeinit.h
+++ b/drivers/net/sk98lin/h/skgeinit.h
@@ -464,12 +464,6 @@
/*
* public functions in skgeinit.c
*/
-extern void SkGePollRxD(
- SK_AC *pAC,
- SK_IOC IoC,
- int Port,
- SK_BOOL PollRxD);
-
extern void SkGePollTxD(
SK_AC *pAC,
SK_IOC IoC,
@@ -522,10 +516,6 @@
int Led,
int Mode);
-extern void SkGeInitRamIface(
- SK_AC *pAC,
- SK_IOC IoC);
-
extern int SkGeInitAssignRamToQueues(
SK_AC *pAC,
int ActivePort,
@@ -549,11 +539,6 @@
SK_IOC IoC,
int Port);
-extern void SkMacClearRst(
- SK_AC *pAC,
- SK_IOC IoC,
- int Port);
-
extern void SkXmInitMac(
SK_AC *pAC,
SK_IOC IoC,
@@ -580,11 +565,6 @@
SK_IOC IoC,
int Port);
-extern void SkMacFlushRxFifo(
- SK_AC *pAC,
- SK_IOC IoC,
- int Port);
-
extern void SkMacIrq(
SK_AC *pAC,
SK_IOC IoC,
@@ -601,12 +581,6 @@
int Port,
SK_U16 IStatus);
-extern void SkMacSetRxTxEn(
- SK_AC *pAC,
- SK_IOC IoC,
- int Port,
- int Para);
-
extern int SkMacRxTxEnable(
SK_AC *pAC,
SK_IOC IoC,
@@ -659,16 +633,6 @@
int StartNum,
int StopNum);
-extern void SkXmInitDupMd(
- SK_AC *pAC,
- SK_IOC IoC,
- int Port);
-
-extern void SkXmInitPauseMd(
- SK_AC *pAC,
- SK_IOC IoC,
- int Port);
-
extern void SkXmAutoNegLipaXmac(
SK_AC *pAC,
SK_IOC IoC,
@@ -729,17 +693,6 @@
int Port,
SK_BOOL StartTest);
-extern int SkGmEnterLowPowerMode(
- SK_AC *pAC,
- SK_IOC IoC,
- int Port,
- SK_U8 Mode);
-
-extern int SkGmLeaveLowPowerMode(
- SK_AC *pAC,
- SK_IOC IoC,
- int Port);
-
#ifdef SK_DIAG
extern void SkGePhyRead(
SK_AC *pAC,
@@ -782,7 +735,6 @@
/*
* public functions in skgeinit.c
*/
-extern void SkGePollRxD();
extern void SkGePollTxD();
extern void SkGeYellowLED();
extern int SkGeCfgSync();
@@ -792,7 +744,6 @@
extern void SkGeDeInit();
extern int SkGeInitPort();
extern void SkGeXmitLED();
-extern void SkGeInitRamIface();
extern int SkGeInitAssignRamToQueues();
/*
@@ -801,18 +752,15 @@
extern void SkMacRxTxDisable();
extern void SkMacSoftRst();
extern void SkMacHardRst();
-extern void SkMacClearRst();
extern void SkMacInitPhy();
extern int SkMacRxTxEnable();
extern void SkMacPromiscMode();
extern void SkMacHashing();
extern void SkMacIrqDisable();
extern void SkMacFlushTxFifo();
-extern void SkMacFlushRxFifo();
extern void SkMacIrq();
extern int SkMacAutoNegDone();
extern void SkMacAutoNegLipaPhy();
-extern void SkMacSetRxTxEn();
extern void SkXmInitMac();
extern void SkXmPhyRead();
extern void SkXmPhyWrite();
@@ -820,8 +768,6 @@
extern void SkGmPhyRead();
extern void SkGmPhyWrite();
extern void SkXmClrExactAddr();
-extern void SkXmInitDupMd();
-extern void SkXmInitPauseMd();
extern void SkXmAutoNegLipaXmac();
extern int SkXmUpdateStats();
extern int SkGmUpdateStats();
@@ -832,8 +778,6 @@
extern int SkXmOverflowStatus();
extern int SkGmOverflowStatus();
extern int SkGmCableDiagStatus();
-extern int SkGmEnterLowPowerMode();
-extern int SkGmLeaveLowPowerMode();
#ifdef SK_DIAG
extern void SkGePhyRead();
diff --git a/drivers/net/sk98lin/h/skgepnmi.h b/drivers/net/sk98lin/h/skgepnmi.h
index 3b2773e..1ed214c 100644
--- a/drivers/net/sk98lin/h/skgepnmi.h
+++ b/drivers/net/sk98lin/h/skgepnmi.h
@@ -946,10 +946,6 @@
* Function prototypes
*/
extern int SkPnmiInit(SK_AC *pAC, SK_IOC IoC, int Level);
-extern int SkPnmiGetVar(SK_AC *pAC, SK_IOC IoC, SK_U32 Id, void* pBuf,
- unsigned int* pLen, SK_U32 Instance, SK_U32 NetIndex);
-extern int SkPnmiPreSetVar(SK_AC *pAC, SK_IOC IoC, SK_U32 Id,
- void* pBuf, unsigned int *pLen, SK_U32 Instance, SK_U32 NetIndex);
extern int SkPnmiSetVar(SK_AC *pAC, SK_IOC IoC, SK_U32 Id, void* pBuf,
unsigned int *pLen, SK_U32 Instance, SK_U32 NetIndex);
extern int SkPnmiGetStruct(SK_AC *pAC, SK_IOC IoC, void* pBuf,
diff --git a/drivers/net/sk98lin/h/skgesirq.h b/drivers/net/sk98lin/h/skgesirq.h
index b486bd9..3eec627 100644
--- a/drivers/net/sk98lin/h/skgesirq.h
+++ b/drivers/net/sk98lin/h/skgesirq.h
@@ -105,7 +105,6 @@
extern void SkGeSirqIsr(SK_AC *pAC, SK_IOC IoC, SK_U32 Istatus);
extern int SkGeSirqEvent(SK_AC *pAC, SK_IOC IoC, SK_U32 Event, SK_EVPARA Para);
-extern void SkHWLinkUp(SK_AC *pAC, SK_IOC IoC, int Port);
extern void SkHWLinkDown(SK_AC *pAC, SK_IOC IoC, int Port);
#endif /* _INC_SKGESIRQ_H_ */
diff --git a/drivers/net/sk98lin/h/ski2c.h b/drivers/net/sk98lin/h/ski2c.h
index 598bb42..6a63f4a 100644
--- a/drivers/net/sk98lin/h/ski2c.h
+++ b/drivers/net/sk98lin/h/ski2c.h
@@ -162,9 +162,6 @@
} SK_I2C;
extern int SkI2cInit(SK_AC *pAC, SK_IOC IoC, int Level);
-extern int SkI2cWrite(SK_AC *pAC, SK_IOC IoC, SK_U32 Data, int Dev, int Size,
- int Reg, int Burst);
-extern int SkI2cReadSensor(SK_AC *pAC, SK_IOC IoC, SK_SENSOR *pSen);
#ifdef SK_DIAG
extern SK_U32 SkI2cRead(SK_AC *pAC, SK_IOC IoC, int Dev, int Size, int Reg,
int Burst);
diff --git a/drivers/net/sk98lin/h/skvpd.h b/drivers/net/sk98lin/h/skvpd.h
index daa9a8d..fdd9e48 100644
--- a/drivers/net/sk98lin/h/skvpd.h
+++ b/drivers/net/sk98lin/h/skvpd.h
@@ -183,14 +183,6 @@
int addr);
#endif /* SKDIAG */
-extern int VpdSetupPara(
- SK_AC *pAC,
- const char *key,
- const char *buf,
- int len,
- int type,
- int op);
-
extern SK_VPD_STATUS *VpdStat(
SK_AC *pAC,
SK_IOC IoC);
@@ -227,11 +219,6 @@
SK_AC *pAC,
SK_IOC IoC);
-extern void VpdErrLog(
- SK_AC *pAC,
- SK_IOC IoC,
- char *msg);
-
#ifdef SKDIAG
extern int VpdReadBlock(
SK_AC *pAC,
@@ -249,7 +236,6 @@
#endif /* SKDIAG */
#else /* SK_KR_PROTO */
extern SK_U32 VpdReadDWord();
-extern int VpdSetupPara();
extern SK_VPD_STATUS *VpdStat();
extern int VpdKeys();
extern int VpdRead();
@@ -257,7 +243,6 @@
extern int VpdWrite();
extern int VpdDelete();
extern int VpdUpdate();
-extern void VpdErrLog();
#endif /* SK_KR_PROTO */
#endif /* __INC_SKVPD_H_ */
diff --git a/drivers/net/sk98lin/skaddr.c b/drivers/net/sk98lin/skaddr.c
index a7e25ed..6e6c56a 100644
--- a/drivers/net/sk98lin/skaddr.c
+++ b/drivers/net/sk98lin/skaddr.c
@@ -87,6 +87,21 @@
static int Next0[SK_MAX_MACS] = {0};
#endif /* DEBUG */
+static int SkAddrGmacMcAdd(SK_AC *pAC, SK_IOC IoC, SK_U32 PortNumber,
+ SK_MAC_ADDR *pMc, int Flags);
+static int SkAddrGmacMcClear(SK_AC *pAC, SK_IOC IoC, SK_U32 PortNumber,
+ int Flags);
+static int SkAddrGmacMcUpdate(SK_AC *pAC, SK_IOC IoC, SK_U32 PortNumber);
+static int SkAddrGmacPromiscuousChange(SK_AC *pAC, SK_IOC IoC,
+ SK_U32 PortNumber, int NewPromMode);
+static int SkAddrXmacMcAdd(SK_AC *pAC, SK_IOC IoC, SK_U32 PortNumber,
+ SK_MAC_ADDR *pMc, int Flags);
+static int SkAddrXmacMcClear(SK_AC *pAC, SK_IOC IoC, SK_U32 PortNumber,
+ int Flags);
+static int SkAddrXmacMcUpdate(SK_AC *pAC, SK_IOC IoC, SK_U32 PortNumber);
+static int SkAddrXmacPromiscuousChange(SK_AC *pAC, SK_IOC IoC,
+ SK_U32 PortNumber, int NewPromMode);
+
/* functions ******************************************************************/
/******************************************************************************
@@ -372,7 +387,7 @@
* SK_ADDR_SUCCESS
* SK_ADDR_ILLEGAL_PORT
*/
-int SkAddrXmacMcClear(
+static int SkAddrXmacMcClear(
SK_AC *pAC, /* adapter context */
SK_IOC IoC, /* I/O context */
SK_U32 PortNumber, /* Index of affected port */
@@ -429,7 +444,7 @@
* SK_ADDR_SUCCESS
* SK_ADDR_ILLEGAL_PORT
*/
-int SkAddrGmacMcClear(
+static int SkAddrGmacMcClear(
SK_AC *pAC, /* adapter context */
SK_IOC IoC, /* I/O context */
SK_U32 PortNumber, /* Index of affected port */
@@ -519,7 +534,7 @@
* Returns:
* Hash value of multicast address.
*/
-SK_U32 SkXmacMcHash(
+static SK_U32 SkXmacMcHash(
unsigned char *pMc) /* Multicast address */
{
SK_U32 Idx;
@@ -557,7 +572,7 @@
* Returns:
* Hash value of multicast address.
*/
-SK_U32 SkGmacMcHash(
+static SK_U32 SkGmacMcHash(
unsigned char *pMc) /* Multicast address */
{
SK_U32 Data;
@@ -672,7 +687,7 @@
* SK_MC_ILLEGAL_ADDRESS
* SK_MC_RLMT_OVERFLOW
*/
-int SkAddrXmacMcAdd(
+static int SkAddrXmacMcAdd(
SK_AC *pAC, /* adapter context */
SK_IOC IoC, /* I/O context */
SK_U32 PortNumber, /* Port Number */
@@ -778,7 +793,7 @@
* SK_MC_FILTERING_INEXACT
* SK_MC_ILLEGAL_ADDRESS
*/
-int SkAddrGmacMcAdd(
+static int SkAddrGmacMcAdd(
SK_AC *pAC, /* adapter context */
SK_IOC IoC, /* I/O context */
SK_U32 PortNumber, /* Port Number */
@@ -937,7 +952,7 @@
* SK_MC_FILTERING_INEXACT
* SK_ADDR_ILLEGAL_PORT
*/
-int SkAddrXmacMcUpdate(
+static int SkAddrXmacMcUpdate(
SK_AC *pAC, /* adapter context */
SK_IOC IoC, /* I/O context */
SK_U32 PortNumber) /* Port Number */
@@ -1082,7 +1097,7 @@
* SK_MC_FILTERING_INEXACT
* SK_ADDR_ILLEGAL_PORT
*/
-int SkAddrGmacMcUpdate(
+static int SkAddrGmacMcUpdate(
SK_AC *pAC, /* adapter context */
SK_IOC IoC, /* I/O context */
SK_U32 PortNumber) /* Port Number */
@@ -1468,7 +1483,7 @@
* SK_ADDR_SUCCESS
* SK_ADDR_ILLEGAL_PORT
*/
-int SkAddrXmacPromiscuousChange(
+static int SkAddrXmacPromiscuousChange(
SK_AC *pAC, /* adapter context */
SK_IOC IoC, /* I/O context */
SK_U32 PortNumber, /* port whose promiscuous mode changes */
@@ -1585,7 +1600,7 @@
* SK_ADDR_SUCCESS
* SK_ADDR_ILLEGAL_PORT
*/
-int SkAddrGmacPromiscuousChange(
+static int SkAddrGmacPromiscuousChange(
SK_AC *pAC, /* adapter context */
SK_IOC IoC, /* I/O context */
SK_U32 PortNumber, /* port whose promiscuous mode changes */
diff --git a/drivers/net/sk98lin/skgeinit.c b/drivers/net/sk98lin/skgeinit.c
index 6cb49dd..67f1d6a 100644
--- a/drivers/net/sk98lin/skgeinit.c
+++ b/drivers/net/sk98lin/skgeinit.c
@@ -59,34 +59,6 @@
/******************************************************************************
*
- * SkGePollRxD() - Enable / Disable Descriptor Polling of RxD Ring
- *
- * Description:
- * Enable or disable the descriptor polling of the receive descriptor
- * ring (RxD) for port 'Port'.
- * The new configuration is *not* saved over any SkGeStopPort() and
- * SkGeInitPort() calls.
- *
- * Returns:
- * nothing
- */
-void SkGePollRxD(
-SK_AC *pAC, /* adapter context */
-SK_IOC IoC, /* IO context */
-int Port, /* Port Index (MAC_1 + n) */
-SK_BOOL PollRxD) /* SK_TRUE (enable pol.), SK_FALSE (disable pol.) */
-{
- SK_GEPORT *pPrt;
-
- pPrt = &pAC->GIni.GP[Port];
-
- SK_OUT32(IoC, Q_ADDR(pPrt->PRxQOff, Q_CSR), (PollRxD) ?
- CSR_ENA_POL : CSR_DIS_POL);
-} /* SkGePollRxD */
-
-
-/******************************************************************************
- *
* SkGePollTxD() - Enable / Disable Descriptor Polling of TxD Rings
*
* Description:
@@ -952,7 +924,7 @@
* Returns:
* nothing
*/
-void SkGeInitRamIface(
+static void SkGeInitRamIface(
SK_AC *pAC, /* adapter context */
SK_IOC IoC) /* IO context */
{
@@ -1409,83 +1381,6 @@
} /* SkGeInit0*/
-#ifdef SK_PCI_RESET
-
-/******************************************************************************
- *
- * SkGePciReset() - Reset PCI interface
- *
- * Description:
- * o Read PCI configuration.
- * o Change power state to 3.
- * o Change power state to 0.
- * o Restore PCI configuration.
- *
- * Returns:
- * 0: Success.
- * 1: Power state could not be changed to 3.
- */
-static int SkGePciReset(
-SK_AC *pAC, /* adapter context */
-SK_IOC IoC) /* IO context */
-{
- int i;
- SK_U16 PmCtlSts;
- SK_U32 Bp1;
- SK_U32 Bp2;
- SK_U16 PciCmd;
- SK_U8 Cls;
- SK_U8 Lat;
- SK_U8 ConfigSpace[PCI_CFG_SIZE];
-
- /*
- * Note: Switching to D3 state is like a software reset.
- * Switching from D3 to D0 is a hardware reset.
- * We have to save and restore the configuration space.
- */
- for (i = 0; i < PCI_CFG_SIZE; i++) {
- SkPciReadCfgDWord(pAC, i*4, &ConfigSpace[i]);
- }
-
- /* We know the RAM Interface Arbiter is enabled. */
- SkPciWriteCfgWord(pAC, PCI_PM_CTL_STS, PCI_PM_STATE_D3);
- SkPciReadCfgWord(pAC, PCI_PM_CTL_STS, &PmCtlSts);
-
- if ((PmCtlSts & PCI_PM_STATE_MSK) != PCI_PM_STATE_D3) {
- return(1);
- }
-
- /* Return to D0 state. */
- SkPciWriteCfgWord(pAC, PCI_PM_CTL_STS, PCI_PM_STATE_D0);
-
- /* Check for D0 state. */
- SkPciReadCfgWord(pAC, PCI_PM_CTL_STS, &PmCtlSts);
-
- if ((PmCtlSts & PCI_PM_STATE_MSK) != PCI_PM_STATE_D0) {
- return(1);
- }
-
- /* Check PCI Config Registers. */
- SkPciReadCfgWord(pAC, PCI_COMMAND, &PciCmd);
- SkPciReadCfgByte(pAC, PCI_CACHE_LSZ, &Cls);
- SkPciReadCfgDWord(pAC, PCI_BASE_1ST, &Bp1);
- SkPciReadCfgDWord(pAC, PCI_BASE_2ND, &Bp2);
- SkPciReadCfgByte(pAC, PCI_LAT_TIM, &Lat);
-
- if (PciCmd != 0 || Cls != (SK_U8)0 || Lat != (SK_U8)0 ||
- (Bp1 & 0xfffffff0L) != 0 || Bp2 != 1) {
- return(1);
- }
-
- /* Restore PCI Config Space. */
- for (i = 0; i < PCI_CFG_SIZE; i++) {
- SkPciWriteCfgDWord(pAC, i*4, ConfigSpace[i]);
- }
-
- return(0);
-} /* SkGePciReset */
-
-#endif /* SK_PCI_RESET */
/******************************************************************************
*
@@ -1524,10 +1419,6 @@
/* save CLK_RUN bits (YUKON-Lite) */
SK_IN16(IoC, B0_CTST, &CtrlStat);
-#ifdef SK_PCI_RESET
- (void)SkGePciReset(pAC, IoC);
-#endif /* SK_PCI_RESET */
-
/* do the SW-reset */
SK_OUT8(IoC, B0_CTST, CS_RST_SET);
@@ -1991,11 +1882,6 @@
int i;
SK_U16 Word;
-#ifdef SK_PHY_LP_MODE
- SK_U8 Byte;
- SK_U16 PmCtlSts;
-#endif /* SK_PHY_LP_MODE */
-
#if (!defined(SK_SLIM) && !defined(VCPU))
/* ensure I2C is ready */
SkI2cWaitIrq(pAC, IoC);
@@ -2010,38 +1896,6 @@
}
}
-#ifdef SK_PHY_LP_MODE
- /*
- * for power saving purposes within mobile environments
- * we set the PHY to coma mode and switch to D3 power state.
- */
- if (pAC->GIni.GIYukonLite &&
- pAC->GIni.GIChipRev >= CHIP_REV_YU_LITE_A3) {
-
- /* for all ports switch PHY to coma mode */
- for (i = 0; i < pAC->GIni.GIMacsFound; i++) {
-
- SkGmEnterLowPowerMode(pAC, IoC, i, PHY_PM_DEEP_SLEEP);
- }
-
- if (pAC->GIni.GIVauxAvail) {
- /* switch power to VAUX */
- Byte = PC_VAUX_ENA | PC_VCC_ENA | PC_VAUX_ON | PC_VCC_OFF;
-
- SK_OUT8(IoC, B0_POWER_CTRL, Byte);
- }
-
- /* switch to D3 state */
- SK_IN16(IoC, PCI_C(PCI_PM_CTL_STS), &PmCtlSts);
-
- PmCtlSts |= PCI_PM_STATE_D3;
-
- SK_OUT8(IoC, B2_TST_CTRL1, TST_CFG_WRITE_ON);
-
- SK_OUT16(IoC, PCI_C(PCI_PM_CTL_STS), PmCtlSts);
- }
-#endif /* SK_PHY_LP_MODE */
-
/* Reset all bits in the PCI STATUS register */
/*
* Note: PCI Cfg cycles cannot be used, because they are not
diff --git a/drivers/net/sk98lin/skgemib.c b/drivers/net/sk98lin/skgemib.c
index 2991bc8..0a6f67a 100644
--- a/drivers/net/sk98lin/skgemib.c
+++ b/drivers/net/sk98lin/skgemib.c
@@ -871,13 +871,6 @@
sizeof(SK_PNMI_CONF),
SK_PNMI_OFF(Conf) + SK_PNMI_CNF_OFF(ConfPhyType),
SK_PNMI_RO, MacPrivateConf, 0},
-#ifdef SK_PHY_LP_MODE
- {OID_SKGE_PHY_LP_MODE,
- SK_PNMI_MAC_ENTRIES,
- sizeof(SK_PNMI_CONF),
- SK_PNMI_OFF(Conf) + SK_PNMI_CNF_OFF(ConfPhyMode),
- SK_PNMI_RW, MacPrivateConf, 0},
-#endif
{OID_SKGE_LINK_CAP,
SK_PNMI_MAC_ENTRIES,
sizeof(SK_PNMI_CONF),
diff --git a/drivers/net/sk98lin/skgepnmi.c b/drivers/net/sk98lin/skgepnmi.c
index a386172..b36dd9a 100644
--- a/drivers/net/sk98lin/skgepnmi.c
+++ b/drivers/net/sk98lin/skgepnmi.c
@@ -56,10 +56,6 @@
* Public Function prototypes
*/
int SkPnmiInit(SK_AC *pAC, SK_IOC IoC, int level);
-int SkPnmiGetVar(SK_AC *pAC, SK_IOC IoC, SK_U32 Id, void *pBuf,
- unsigned int *pLen, SK_U32 Instance, SK_U32 NetIndex);
-int SkPnmiPreSetVar(SK_AC *pAC, SK_IOC IoC, SK_U32 Id, void *pBuf,
- unsigned int *pLen, SK_U32 Instance, SK_U32 NetIndex);
int SkPnmiSetVar(SK_AC *pAC, SK_IOC IoC, SK_U32 Id, void *pBuf,
unsigned int *pLen, SK_U32 Instance, SK_U32 NetIndex);
int SkPnmiGetStruct(SK_AC *pAC, SK_IOC IoC, void *pBuf,
@@ -587,7 +583,7 @@
* exist (e.g. port instance 3 on a two port
* adapter.
*/
-int SkPnmiGetVar(
+static int SkPnmiGetVar(
SK_AC *pAC, /* Pointer to adapter context */
SK_IOC IoC, /* IO context handle */
SK_U32 Id, /* Object ID that is to be processed */
@@ -629,7 +625,7 @@
* exist (e.g. port instance 3 on a two port
* adapter.
*/
-int SkPnmiPreSetVar(
+static int SkPnmiPreSetVar(
SK_AC *pAC, /* Pointer to adapter context */
SK_IOC IoC, /* IO context handle */
SK_U32 Id, /* Object ID that is to be processed */
@@ -5062,9 +5058,6 @@
case OID_SKGE_SPEED_CAP:
case OID_SKGE_SPEED_MODE:
case OID_SKGE_SPEED_STATUS:
-#ifdef SK_PHY_LP_MODE
- case OID_SKGE_PHY_LP_MODE:
-#endif
if (*pLen < (Limit - LogPortIndex) * sizeof(SK_U8)) {
*pLen = (Limit - LogPortIndex) * sizeof(SK_U8);
@@ -5140,28 +5133,6 @@
Offset += sizeof(SK_U32);
break;
-#ifdef SK_PHY_LP_MODE
- case OID_SKGE_PHY_LP_MODE:
- if (!pAC->Pnmi.DualNetActiveFlag) { /* SingleNetMode */
- if (LogPortIndex == 0) {
- continue;
- }
- else {
- /* Get value for physical ports */
- PhysPortIndex = SK_PNMI_PORT_LOG2PHYS(pAC, LogPortIndex);
- Val8 = (SK_U8) pAC->GIni.GP[PhysPortIndex].PPhyPowerState;
- *pBufPtr = Val8;
- }
- }
- else { /* DualNetMode */
-
- Val8 = (SK_U8) pAC->GIni.GP[PhysPortIndex].PPhyPowerState;
- *pBufPtr = Val8;
- }
- Offset += sizeof(SK_U8);
- break;
-#endif
-
case OID_SKGE_LINK_CAP:
if (!pAC->Pnmi.DualNetActiveFlag) { /* SingleNetMode */
if (LogPortIndex == 0) {
@@ -5478,16 +5449,6 @@
}
break;
-#ifdef SK_PHY_LP_MODE
- case OID_SKGE_PHY_LP_MODE:
- if (*pLen < Limit - LogPortIndex) {
-
- *pLen = Limit - LogPortIndex;
- return (SK_PNMI_ERR_TOO_SHORT);
- }
- break;
-#endif
-
case OID_SKGE_MTU:
if (*pLen < sizeof(SK_U32)) {
@@ -5845,116 +5806,6 @@
Offset += sizeof(SK_U32);
break;
-#ifdef SK_PHY_LP_MODE
- case OID_SKGE_PHY_LP_MODE:
- /* The preset ends here */
- if (Action == SK_PNMI_PRESET) {
-
- return (SK_PNMI_ERR_OK);
- }
-
- if (!pAC->Pnmi.DualNetActiveFlag) { /* SingleNetMode */
- if (LogPortIndex == 0) {
- Offset = 0;
- continue;
- }
- else {
- /* Set value for physical ports */
- PhysPortIndex = SK_PNMI_PORT_LOG2PHYS(pAC, LogPortIndex);
-
- switch (*(pBuf + Offset)) {
- case 0:
- /* If LowPowerMode is active, we can leave it. */
- if (pAC->GIni.GP[PhysPortIndex].PPhyPowerState) {
-
- Val32 = SkGmLeaveLowPowerMode(pAC, IoC, PhysPortIndex);
-
- if (pAC->GIni.GP[PhysPortIndex].PPhyPowerState < 3) {
-
- SkDrvInitAdapter(pAC);
- }
- break;
- }
- else {
- *pLen = 0;
- return (SK_PNMI_ERR_GENERAL);
- }
- case 1:
- case 2:
- case 3:
- case 4:
- /* If no LowPowerMode is active, we can enter it. */
- if (!pAC->GIni.GP[PhysPortIndex].PPhyPowerState) {
-
- if ((*(pBuf + Offset)) < 3) {
-
- SkDrvDeInitAdapter(pAC);
- }
-
- Val32 = SkGmEnterLowPowerMode(pAC, IoC, PhysPortIndex, *pBuf);
- break;
- }
- else {
- *pLen = 0;
- return (SK_PNMI_ERR_GENERAL);
- }
- default:
- *pLen = 0;
- return (SK_PNMI_ERR_BAD_VALUE);
- }
- }
- }
- else { /* DualNetMode */
-
- switch (*(pBuf + Offset)) {
- case 0:
- /* If we are in a LowPowerMode, we can leave it. */
- if (pAC->GIni.GP[PhysPortIndex].PPhyPowerState) {
-
- Val32 = SkGmLeaveLowPowerMode(pAC, IoC, PhysPortIndex);
-
- if (pAC->GIni.GP[PhysPortIndex].PPhyPowerState < 3) {
-
- SkDrvInitAdapter(pAC);
- }
- break;
- }
- else {
- *pLen = 0;
- return (SK_PNMI_ERR_GENERAL);
- }
-
- case 1:
- case 2:
- case 3:
- case 4:
- /* If we are not already in LowPowerMode, we can enter it. */
- if (!pAC->GIni.GP[PhysPortIndex].PPhyPowerState) {
-
- if ((*(pBuf + Offset)) < 3) {
-
- SkDrvDeInitAdapter(pAC);
- }
- else {
-
- Val32 = SkGmEnterLowPowerMode(pAC, IoC, PhysPortIndex, *pBuf);
- }
- break;
- }
- else {
- *pLen = 0;
- return (SK_PNMI_ERR_GENERAL);
- }
-
- default:
- *pLen = 0;
- return (SK_PNMI_ERR_BAD_VALUE);
- }
- }
- Offset += sizeof(SK_U8);
- break;
-#endif
-
default:
SK_DBG_MSG(pAC, SK_DBGMOD_PNMI, SK_DBGCAT_ERR,
("MacPrivateConf: Unknown OID should be handled before set"));
diff --git a/drivers/net/sk98lin/skgesirq.c b/drivers/net/sk98lin/skgesirq.c
index 87520f0..ab66d80 100644
--- a/drivers/net/sk98lin/skgesirq.c
+++ b/drivers/net/sk98lin/skgesirq.c
@@ -265,7 +265,7 @@
*
* Returns: N/A
*/
-void SkHWLinkUp(
+static void SkHWLinkUp(
SK_AC *pAC, /* adapter context */
SK_IOC IoC, /* IO context */
int Port) /* Port Index (MAC_1 + n) */
@@ -612,14 +612,6 @@
* we ignore those
*/
pPrt->HalfDupTimerActive = SK_TRUE;
-#ifdef XXX
- Len = sizeof(SK_U64);
- SkPnmiGetVar(pAC, IoC, OID_SKGE_STAT_TX_OCTETS, (char *)&Octets,
- &Len, (SK_U32)SK_PNMI_PORT_PHYS2INST(pAC, 0),
- pAC->Rlmt.Port[0].Net->NetNumber);
-
- pPrt->LastOctets = Octets;
-#endif /* XXX */
/* Snap statistic counters */
(void)SkXmUpdateStats(pAC, IoC, 0);
@@ -653,14 +645,6 @@
pPrt->PLinkModeStatus == SK_LMODE_STAT_AUTOHALF) &&
!pPrt->HalfDupTimerActive) {
pPrt->HalfDupTimerActive = SK_TRUE;
-#ifdef XXX
- Len = sizeof(SK_U64);
- SkPnmiGetVar(pAC, IoC, OID_SKGE_STAT_TX_OCTETS, (char *)&Octets,
- &Len, (SK_U32)SK_PNMI_PORT_PHYS2INST(pAC, 1),
- pAC->Rlmt.Port[1].Net->NetNumber);
-
- pPrt->LastOctets = Octets;
-#endif /* XXX */
/* Snap statistic counters */
(void)SkXmUpdateStats(pAC, IoC, 1);
@@ -2085,12 +2069,6 @@
pPrt->HalfDupTimerActive = SK_FALSE;
if (pPrt->PLinkModeStatus == SK_LMODE_STAT_HALF ||
pPrt->PLinkModeStatus == SK_LMODE_STAT_AUTOHALF) {
-#ifdef XXX
- Len = sizeof(SK_U64);
- SkPnmiGetVar(pAC, IoC, OID_SKGE_STAT_TX_OCTETS, (char *)&Octets,
- &Len, (SK_U32)SK_PNMI_PORT_PHYS2INST(pAC, Port),
- pAC->Rlmt.Port[Port].Net->NetNumber);
-#endif /* XXX */
/* Snap statistic counters */
(void)SkXmUpdateStats(pAC, IoC, Port);
diff --git a/drivers/net/sk98lin/ski2c.c b/drivers/net/sk98lin/ski2c.c
index 075a046..79bf57c 100644
--- a/drivers/net/sk98lin/ski2c.c
+++ b/drivers/net/sk98lin/ski2c.c
@@ -396,7 +396,7 @@
* 1: error, transfer does not complete, I2C transfer
* killed, wait loop terminated.
*/
-int SkI2cWait(
+static int SkI2cWait(
SK_AC *pAC, /* Adapter Context */
SK_IOC IoC, /* I/O Context */
int Event) /* complete event to wait for (I2C_READ or I2C_WRITE) */
@@ -481,7 +481,7 @@
* returns 0: success
* 1: error
*/
-int SkI2cWrite(
+static int SkI2cWrite(
SK_AC *pAC, /* Adapter Context */
SK_IOC IoC, /* I/O Context */
SK_U32 I2cData, /* I2C Data to write */
@@ -538,7 +538,7 @@
* 1 if the read is completed
* 0 if the read must be continued (I2C Bus still allocated)
*/
-int SkI2cReadSensor(
+static int SkI2cReadSensor(
SK_AC *pAC, /* Adapter Context */
SK_IOC IoC, /* I/O Context */
SK_SENSOR *pSen) /* Sensor to be read */
diff --git a/drivers/net/sk98lin/sklm80.c b/drivers/net/sk98lin/sklm80.c
index 68292d1..a204f5b 100644
--- a/drivers/net/sk98lin/sklm80.c
+++ b/drivers/net/sk98lin/sklm80.c
@@ -34,79 +34,7 @@
#include "h/lm80.h"
#include "h/skdrv2nd.h" /* Adapter Control- and Driver specific Def. */
-#ifdef SK_DIAG
-#define BREAK_OR_WAIT(pAC,IoC,Event) SkI2cWait(pAC,IoC,Event)
-#else /* nSK_DIAG */
#define BREAK_OR_WAIT(pAC,IoC,Event) break
-#endif /* nSK_DIAG */
-
-#ifdef SK_DIAG
-/*
- * read the register 'Reg' from the device 'Dev'
- *
- * return read error -1
- * success the read value
- */
-int SkLm80RcvReg(
-SK_IOC IoC, /* Adapter Context */
-int Dev, /* I2C device address */
-int Reg) /* register to read */
-{
- int Val = 0;
- int TempExt;
-
- /* Signal device number */
- if (SkI2cSndDev(IoC, Dev, I2C_WRITE)) {
- return(-1);
- }
-
- if (SkI2cSndByte(IoC, Reg)) {
- return(-1);
- }
-
- /* repeat start */
- if (SkI2cSndDev(IoC, Dev, I2C_READ)) {
- return(-1);
- }
-
- switch (Reg) {
- case LM80_TEMP_IN:
- Val = (int)SkI2cRcvByte(IoC, 1);
-
- /* First: correct the value: it might be negative */
- if ((Val & 0x80) != 0) {
- /* Value is negative */
- Val = Val - 256;
- }
- Val = Val * SK_LM80_TEMP_LSB;
- SkI2cStop(IoC);
-
- TempExt = (int)SkLm80RcvReg(IoC, LM80_ADDR, LM80_TEMP_CTRL);
-
- if (Val > 0) {
- Val += ((TempExt >> 7) * SK_LM80_TEMPEXT_LSB);
- }
- else {
- Val -= ((TempExt >> 7) * SK_LM80_TEMPEXT_LSB);
- }
- return(Val);
- break;
- case LM80_VT0_IN:
- case LM80_VT1_IN:
- case LM80_VT2_IN:
- case LM80_VT3_IN:
- Val = (int)SkI2cRcvByte(IoC, 1) * SK_LM80_VT_LSB;
- break;
-
- default:
- Val = (int)SkI2cRcvByte(IoC, 1);
- break;
- }
-
- SkI2cStop(IoC);
- return(Val);
-}
-#endif /* SK_DIAG */
/*
* read a sensors value (LM80 specific)
diff --git a/drivers/net/sk98lin/skrlmt.c b/drivers/net/sk98lin/skrlmt.c
index 9ea11ab..be8d1cc 100644
--- a/drivers/net/sk98lin/skrlmt.c
+++ b/drivers/net/sk98lin/skrlmt.c
@@ -282,7 +282,6 @@
SK_MAC_ADDR SkRlmtMcAddr = {{0x01, 0x00, 0x5A, 0x52, 0x4C, 0x4D}};
SK_MAC_ADDR BridgeMcAddr = {{0x01, 0x80, 0xC2, 0x00, 0x00, 0x00}};
-SK_MAC_ADDR BcAddr = {{0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF}};
/* local variables ************************************************************/
diff --git a/drivers/net/sk98lin/skvpd.c b/drivers/net/sk98lin/skvpd.c
index eb3c898..1778605 100644
--- a/drivers/net/sk98lin/skvpd.c
+++ b/drivers/net/sk98lin/skvpd.c
@@ -132,65 +132,6 @@
#endif /* SKDIAG */
-#if 0
-
-/*
- Write the dword 'data' at address 'addr' into the VPD EEPROM, and
- verify that the data is written.
-
- Needed Time:
-
-. MIN MAX
-. -------------------------------------------------------------------
-. write 1.8 ms 3.6 ms
-. internal write cyles 0.7 ms 7.0 ms
-. -------------------------------------------------------------------
-. over all program time 2.5 ms 10.6 ms
-. read 1.3 ms 2.6 ms
-. -------------------------------------------------------------------
-. over all 3.8 ms 13.2 ms
-.
-
-
- Returns 0: success
- 1: error, I2C transfer does not terminate
- 2: error, data verify error
-
- */
-static int VpdWriteDWord(
-SK_AC *pAC, /* pAC pointer */
-SK_IOC IoC, /* IO Context */
-int addr, /* VPD address */
-SK_U32 data) /* VPD data to write */
-{
- /* start VPD write */
- /* Don't swap here, it's a data stream of bytes */
- SK_DBG_MSG(pAC, SK_DBGMOD_VPD, SK_DBGCAT_CTRL,
- ("VPD write dword at addr 0x%x, data = 0x%x\n",addr,data));
- VPD_OUT32(pAC, IoC, PCI_VPD_DAT_REG, (SK_U32)data);
- /* But do it here */
- addr |= VPD_WRITE;
-
- VPD_OUT16(pAC, IoC, PCI_VPD_ADR_REG, (SK_U16)(addr | VPD_WRITE));
-
- /* this may take up to 10,6 ms */
- if (VpdWait(pAC, IoC, VPD_WRITE)) {
- SK_DBG_MSG(pAC, SK_DBGMOD_VPD, SK_DBGCAT_ERR,
- ("Write Timed Out\n"));
- return(1);
- };
-
- /* verify data */
- if (VpdReadDWord(pAC, IoC, addr) != data) {
- SK_DBG_MSG(pAC, SK_DBGMOD_VPD, SK_DBGCAT_ERR | SK_DBGCAT_FATAL,
- ("Data Verify Error\n"));
- return(2);
- }
- return(0);
-} /* VpdWriteDWord */
-
-#endif /* 0 */
-
/*
* Read one Stream of 'len' bytes of VPD data, starting at 'addr' from
* or to the I2C EEPROM.
@@ -728,7 +669,7 @@
* 6: fatal VPD error
*
*/
-int VpdSetupPara(
+static int VpdSetupPara(
SK_AC *pAC, /* common data base */
const char *key, /* keyword to insert */
const char *buf, /* buffer with the keyword value */
@@ -1148,50 +1089,3 @@
return(0);
}
-
-
-/*
- * Read the contents of the VPD EEPROM and copy it to the VPD buffer
- * if not already done. If the keyword "VF" is not present it will be
- * created and the error log message will be stored to this keyword.
- * If "VF" is not present the error log message will be stored to the
- * keyword "VL". "VL" will created or overwritten if "VF" is present.
- * The VPD read/write area is saved to the VPD EEPROM.
- *
- * returns nothing, errors will be ignored.
- */
-void VpdErrLog(
-SK_AC *pAC, /* common data base */
-SK_IOC IoC, /* IO Context */
-char *msg) /* error log message */
-{
- SK_VPD_PARA *v, vf; /* VF */
- int len;
-
- SK_DBG_MSG(pAC, SK_DBGMOD_VPD, SK_DBGCAT_TX,
- ("VPD error log msg %s\n", msg));
- if ((pAC->vpd.v.vpd_status & VPD_VALID) == 0) {
- if (VpdInit(pAC, IoC) != 0) {
- SK_DBG_MSG(pAC, SK_DBGMOD_VPD, SK_DBGCAT_ERR,
- ("VPD init error\n"));
- return;
- }
- }
-
- len = strlen(msg);
- if (len > VPD_MAX_LEN) {
- /* cut it */
- len = VPD_MAX_LEN;
- }
- if ((v = vpd_find_para(pAC, VPD_VF, &vf)) != NULL) {
- SK_DBG_MSG(pAC, SK_DBGMOD_VPD, SK_DBGCAT_TX, ("overwrite VL\n"));
- (void)VpdSetupPara(pAC, VPD_VL, msg, len, VPD_RW_KEY, OWR_KEY);
- }
- else {
- SK_DBG_MSG(pAC, SK_DBGMOD_VPD, SK_DBGCAT_TX, ("write VF\n"));
- (void)VpdSetupPara(pAC, VPD_VF, msg, len, VPD_RW_KEY, ADD_KEY);
- }
-
- (void)VpdUpdate(pAC, IoC);
-}
-
diff --git a/drivers/net/sk98lin/skxmac2.c b/drivers/net/sk98lin/skxmac2.c
index 42d2d96..b4e7502 100644
--- a/drivers/net/sk98lin/skxmac2.c
+++ b/drivers/net/sk98lin/skxmac2.c
@@ -41,13 +41,13 @@
#endif
#ifdef GENESIS
-BCOM_HACK BcomRegA1Hack[] = {
+static BCOM_HACK BcomRegA1Hack[] = {
{ 0x18, 0x0c20 }, { 0x17, 0x0012 }, { 0x15, 0x1104 }, { 0x17, 0x0013 },
{ 0x15, 0x0404 }, { 0x17, 0x8006 }, { 0x15, 0x0132 }, { 0x17, 0x8006 },
{ 0x15, 0x0232 }, { 0x17, 0x800D }, { 0x15, 0x000F }, { 0x18, 0x0420 },
{ 0, 0 }
};
-BCOM_HACK BcomRegC0Hack[] = {
+static BCOM_HACK BcomRegC0Hack[] = {
{ 0x18, 0x0c20 }, { 0x17, 0x0012 }, { 0x15, 0x1204 }, { 0x17, 0x0013 },
{ 0x15, 0x0A04 }, { 0x18, 0x0420 },
{ 0, 0 }
@@ -790,7 +790,7 @@
* Returns:
* nothing
*/
-void SkMacFlushRxFifo(
+static void SkMacFlushRxFifo(
SK_AC *pAC, /* adapter context */
SK_IOC IoC, /* IO context */
int Port) /* Port Index (MAC_1 + n) */
@@ -1231,38 +1231,6 @@
} /* SkMacHardRst */
-/******************************************************************************
- *
- * SkMacClearRst() - Clear the MAC reset
- *
- * Description: calls a clear MAC reset routine dep. on board type
- *
- * Returns:
- * nothing
- */
-void SkMacClearRst(
-SK_AC *pAC, /* adapter context */
-SK_IOC IoC, /* IO context */
-int Port) /* Port Index (MAC_1 + n) */
-{
-
-#ifdef GENESIS
- if (pAC->GIni.GIGenesis) {
-
- SkXmClearRst(pAC, IoC, Port);
- }
-#endif /* GENESIS */
-
-#ifdef YUKON
- if (pAC->GIni.GIYukon) {
-
- SkGmClearRst(pAC, IoC, Port);
- }
-#endif /* YUKON */
-
-} /* SkMacClearRst */
-
-
#ifdef GENESIS
/******************************************************************************
*
@@ -1713,7 +1681,7 @@
* Returns:
* nothing
*/
-void SkXmInitDupMd(
+static void SkXmInitDupMd(
SK_AC *pAC, /* adapter context */
SK_IOC IoC, /* IO context */
int Port) /* Port Index (MAC_1 + n) */
@@ -1761,7 +1729,7 @@
* Returns:
* nothing
*/
-void SkXmInitPauseMd(
+static void SkXmInitPauseMd(
SK_AC *pAC, /* adapter context */
SK_IOC IoC, /* IO context */
int Port) /* Port Index (MAC_1 + n) */
@@ -2076,283 +2044,7 @@
} /* SkXmInitPhyBcom */
#endif /* GENESIS */
-
#ifdef YUKON
-#ifndef SK_SLIM
-/******************************************************************************
- *
- * SkGmEnterLowPowerMode()
- *
- * Description:
- * This function sets the Marvell Alaska PHY to the low power mode
- * given by parameter mode.
- * The following low power modes are available:
- *
- * - Coma Mode (Deep Sleep):
- * Power consumption: ~15 - 30 mW
- * The PHY cannot wake up on its own.
- *
- * - IEEE 22.2.4.1.5 compatible power down mode
- * Power consumption: ~240 mW
- * The PHY cannot wake up on its own.
- *
- * - energy detect mode
- * Power consumption: ~160 mW
- * The PHY can wake up on its own by detecting activity
- * on the CAT 5 cable.
- *
- * - energy detect plus mode
- * Power consumption: ~150 mW
- * The PHY can wake up on its own by detecting activity
- * on the CAT 5 cable.
- * Connected devices can be woken up by sending normal link
- * pulses every one second.
- *
- * Note:
- *
- * Returns:
- * 0: ok
- * 1: error
- */
-int SkGmEnterLowPowerMode(
-SK_AC *pAC, /* adapter context */
-SK_IOC IoC, /* IO context */
-int Port, /* Port Index (e.g. MAC_1) */
-SK_U8 Mode) /* low power mode */
-{
- SK_U16 Word;
- SK_U32 DWord;
- SK_U8 LastMode;
- int Ret = 0;
-
- if (pAC->GIni.GIYukonLite &&
- pAC->GIni.GIChipRev >= CHIP_REV_YU_LITE_A3) {
-
- /* save current power mode */
- LastMode = pAC->GIni.GP[Port].PPhyPowerState;
- pAC->GIni.GP[Port].PPhyPowerState = Mode;
-
- switch (Mode) {
- /* coma mode (deep sleep) */
- case PHY_PM_DEEP_SLEEP:
- /* setup General Purpose Control Register */
- GM_OUT16(IoC, 0, GM_GP_CTRL, GM_GPCR_FL_PASS |
- GM_GPCR_SPEED_100 | GM_GPCR_AU_ALL_DIS);
-
- /* apply COMA mode workaround */
- SkGmPhyWrite(pAC, IoC, Port, 29, 0x001f);
- SkGmPhyWrite(pAC, IoC, Port, 30, 0xfff3);
-
- SK_IN32(IoC, PCI_C(PCI_OUR_REG_1), &DWord);
-
- SK_OUT8(IoC, B2_TST_CTRL1, TST_CFG_WRITE_ON);
-
- /* Set PHY to Coma Mode */
- SK_OUT32(IoC, PCI_C(PCI_OUR_REG_1), DWord | PCI_PHY_COMA);
-
- SK_OUT8(IoC, B2_TST_CTRL1, TST_CFG_WRITE_OFF);
-
- break;
-
- /* IEEE 22.2.4.1.5 compatible power down mode */
- case PHY_PM_IEEE_POWER_DOWN:
- /*
- * - disable MAC 125 MHz clock
- * - allow MAC power down
- */
- SkGmPhyRead(pAC, IoC, Port, PHY_MARV_PHY_CTRL, &Word);
- Word |= PHY_M_PC_DIS_125CLK;
- Word &= ~PHY_M_PC_MAC_POW_UP;
- SkGmPhyWrite(pAC, IoC, Port, PHY_MARV_PHY_CTRL, Word);
-
- /*
- * register changes must be followed by a software
- * reset to take effect
- */
- SkGmPhyRead(pAC, IoC, Port, PHY_MARV_CTRL, &Word);
- Word |= PHY_CT_RESET;
- SkGmPhyWrite(pAC, IoC, Port, PHY_MARV_CTRL, Word);
-
- /* switch IEEE compatible power down mode on */
- SkGmPhyRead(pAC, IoC, Port, PHY_MARV_CTRL, &Word);
- Word |= PHY_CT_PDOWN;
- SkGmPhyWrite(pAC, IoC, Port, PHY_MARV_CTRL, Word);
- break;
-
- /* energy detect and energy detect plus mode */
- case PHY_PM_ENERGY_DETECT:
- case PHY_PM_ENERGY_DETECT_PLUS:
- /*
- * - disable MAC 125 MHz clock
- */
- SkGmPhyRead(pAC, IoC, Port, PHY_MARV_PHY_CTRL, &Word);
- Word |= PHY_M_PC_DIS_125CLK;
- SkGmPhyWrite(pAC, IoC, Port, PHY_MARV_PHY_CTRL, Word);
-
- /* activate energy detect mode 1 */
- SkGmPhyRead(pAC, IoC, Port, PHY_MARV_PHY_CTRL, &Word);
-
- /* energy detect mode */
- if (Mode == PHY_PM_ENERGY_DETECT) {
- Word |= PHY_M_PC_EN_DET;
- }
- /* energy detect plus mode */
- else {
- Word |= PHY_M_PC_EN_DET_PLUS;
- }
-
- SkGmPhyWrite(pAC, IoC, Port, PHY_MARV_PHY_CTRL, Word);
-
- /*
- * reinitialize the PHY to force a software reset
- * which is necessary after the register settings
- * for the energy detect modes.
- * Furthermore reinitialisation prevents that the
- * PHY is running out of a stable state.
- */
- SkGmInitPhyMarv(pAC, IoC, Port, SK_FALSE);
- break;
-
- /* don't change current power mode */
- default:
- pAC->GIni.GP[Port].PPhyPowerState = LastMode;
- Ret = 1;
- break;
- }
- }
- /* low power modes are not supported by this chip */
- else {
- Ret = 1;
- }
-
- return(Ret);
-
-} /* SkGmEnterLowPowerMode */
-
-/******************************************************************************
- *
- * SkGmLeaveLowPowerMode()
- *
- * Description:
- * Leave the current low power mode and switch to normal mode
- *
- * Note:
- *
- * Returns:
- * 0: ok
- * 1: error
- */
-int SkGmLeaveLowPowerMode(
-SK_AC *pAC, /* adapter context */
-SK_IOC IoC, /* IO context */
-int Port) /* Port Index (e.g. MAC_1) */
-{
- SK_U32 DWord;
- SK_U16 Word;
- SK_U8 LastMode;
- int Ret = 0;
-
- if (pAC->GIni.GIYukonLite &&
- pAC->GIni.GIChipRev >= CHIP_REV_YU_LITE_A3) {
-
- /* save current power mode */
- LastMode = pAC->GIni.GP[Port].PPhyPowerState;
- pAC->GIni.GP[Port].PPhyPowerState = PHY_PM_OPERATIONAL_MODE;
-
- switch (LastMode) {
- /* coma mode (deep sleep) */
- case PHY_PM_DEEP_SLEEP:
- SK_IN32(IoC, PCI_C(PCI_OUR_REG_1), &DWord);
-
- SK_OUT8(IoC, B2_TST_CTRL1, TST_CFG_WRITE_ON);
-
- /* Release PHY from Coma Mode */
- SK_OUT32(IoC, PCI_C(PCI_OUR_REG_1), DWord & ~PCI_PHY_COMA);
-
- SK_OUT8(IoC, B2_TST_CTRL1, TST_CFG_WRITE_OFF);
-
- SK_IN32(IoC, B2_GP_IO, &DWord);
-
- /* set to output */
- DWord |= (GP_DIR_9 | GP_IO_9);
-
- /* set PHY reset */
- SK_OUT32(IoC, B2_GP_IO, DWord);
-
- DWord &= ~GP_IO_9; /* clear PHY reset (active high) */
-
- /* clear PHY reset */
- SK_OUT32(IoC, B2_GP_IO, DWord);
- break;
-
- /* IEEE 22.2.4.1.5 compatible power down mode */
- case PHY_PM_IEEE_POWER_DOWN:
- /*
- * - enable MAC 125 MHz clock
- * - set MAC power up
- */
- SkGmPhyRead(pAC, IoC, Port, PHY_MARV_PHY_CTRL, &Word);
- Word &= ~PHY_M_PC_DIS_125CLK;
- Word |= PHY_M_PC_MAC_POW_UP;
- SkGmPhyWrite(pAC, IoC, Port, PHY_MARV_PHY_CTRL, Word);
-
- /*
- * register changes must be followed by a software
- * reset to take effect
- */
- SkGmPhyRead(pAC, IoC, Port, PHY_MARV_CTRL, &Word);
- Word |= PHY_CT_RESET;
- SkGmPhyWrite(pAC, IoC, Port, PHY_MARV_CTRL, Word);
-
- /* switch IEEE compatible power down mode off */
- SkGmPhyRead(pAC, IoC, Port, PHY_MARV_CTRL, &Word);
- Word &= ~PHY_CT_PDOWN;
- SkGmPhyWrite(pAC, IoC, Port, PHY_MARV_CTRL, Word);
- break;
-
- /* energy detect and energy detect plus mode */
- case PHY_PM_ENERGY_DETECT:
- case PHY_PM_ENERGY_DETECT_PLUS:
- /*
- * - enable MAC 125 MHz clock
- */
- SkGmPhyRead(pAC, IoC, Port, PHY_MARV_PHY_CTRL, &Word);
- Word &= ~PHY_M_PC_DIS_125CLK;
- SkGmPhyWrite(pAC, IoC, Port, PHY_MARV_PHY_CTRL, Word);
-
- /* disable energy detect mode */
- SkGmPhyRead(pAC, IoC, Port, PHY_MARV_PHY_CTRL, &Word);
- Word &= ~PHY_M_PC_EN_DET_MSK;
- SkGmPhyWrite(pAC, IoC, Port, PHY_MARV_PHY_CTRL, Word);
-
- /*
- * reinitialize the PHY to force a software reset
- * which is necessary after the register settings
- * for the energy detect modes.
- * Furthermore reinitialisation prevents that the
- * PHY is running out of a stable state.
- */
- SkGmInitPhyMarv(pAC, IoC, Port, SK_FALSE);
- break;
-
- /* don't change current power mode */
- default:
- pAC->GIni.GP[Port].PPhyPowerState = LastMode;
- Ret = 1;
- break;
- }
- }
- /* low power modes are not supported by this chip */
- else {
- Ret = 1;
- }
-
- return(Ret);
-
-} /* SkGmLeaveLowPowerMode */
-#endif /* !SK_SLIM */
-
-
/******************************************************************************
*
* SkGmInitPhyMarv() - Initialize the Marvell Phy registers
@@ -3420,145 +3112,6 @@
} /* SkMacAutoNegDone */
-#ifdef GENESIS
-/******************************************************************************
- *
- * SkXmSetRxTxEn() - Special Set Rx/Tx Enable and some features in XMAC
- *
- * Description:
- * sets MAC or PHY LoopBack and Duplex Mode in the MMU Command Reg.
- * enables Rx/Tx
- *
- * Returns: N/A
- */
-static void SkXmSetRxTxEn(
-SK_AC *pAC, /* Adapter Context */
-SK_IOC IoC, /* IO context */
-int Port, /* Port Index (MAC_1 + n) */
-int Para) /* Parameter to set: MAC or PHY LoopBack, Duplex Mode */
-{
- SK_U16 Word;
-
- XM_IN16(IoC, Port, XM_MMU_CMD, &Word);
-
- switch (Para & (SK_MAC_LOOPB_ON | SK_MAC_LOOPB_OFF)) {
- case SK_MAC_LOOPB_ON:
- Word |= XM_MMU_MAC_LB;
- break;
- case SK_MAC_LOOPB_OFF:
- Word &= ~XM_MMU_MAC_LB;
- break;
- }
-
- switch (Para & (SK_PHY_LOOPB_ON | SK_PHY_LOOPB_OFF)) {
- case SK_PHY_LOOPB_ON:
- Word |= XM_MMU_GMII_LOOP;
- break;
- case SK_PHY_LOOPB_OFF:
- Word &= ~XM_MMU_GMII_LOOP;
- break;
- }
-
- switch (Para & (SK_PHY_FULLD_ON | SK_PHY_FULLD_OFF)) {
- case SK_PHY_FULLD_ON:
- Word |= XM_MMU_GMII_FD;
- break;
- case SK_PHY_FULLD_OFF:
- Word &= ~XM_MMU_GMII_FD;
- break;
- }
-
- XM_OUT16(IoC, Port, XM_MMU_CMD, Word | XM_MMU_ENA_RX | XM_MMU_ENA_TX);
-
- /* dummy read to ensure writing */
- XM_IN16(IoC, Port, XM_MMU_CMD, &Word);
-
-} /* SkXmSetRxTxEn */
-#endif /* GENESIS */
-
-
-#ifdef YUKON
-/******************************************************************************
- *
- * SkGmSetRxTxEn() - Special Set Rx/Tx Enable and some features in GMAC
- *
- * Description:
- * sets MAC LoopBack and Duplex Mode in the General Purpose Control Reg.
- * enables Rx/Tx
- *
- * Returns: N/A
- */
-static void SkGmSetRxTxEn(
-SK_AC *pAC, /* Adapter Context */
-SK_IOC IoC, /* IO context */
-int Port, /* Port Index (MAC_1 + n) */
-int Para) /* Parameter to set: MAC LoopBack, Duplex Mode */
-{
- SK_U16 Ctrl;
-
- GM_IN16(IoC, Port, GM_GP_CTRL, &Ctrl);
-
- switch (Para & (SK_MAC_LOOPB_ON | SK_MAC_LOOPB_OFF)) {
- case SK_MAC_LOOPB_ON:
- Ctrl |= GM_GPCR_LOOP_ENA;
- break;
- case SK_MAC_LOOPB_OFF:
- Ctrl &= ~GM_GPCR_LOOP_ENA;
- break;
- }
-
- switch (Para & (SK_PHY_FULLD_ON | SK_PHY_FULLD_OFF)) {
- case SK_PHY_FULLD_ON:
- Ctrl |= GM_GPCR_DUP_FULL;
- break;
- case SK_PHY_FULLD_OFF:
- Ctrl &= ~GM_GPCR_DUP_FULL;
- break;
- }
-
- GM_OUT16(IoC, Port, GM_GP_CTRL, (SK_U16)(Ctrl | GM_GPCR_RX_ENA |
- GM_GPCR_TX_ENA));
-
- /* dummy read to ensure writing */
- GM_IN16(IoC, Port, GM_GP_CTRL, &Ctrl);
-
-} /* SkGmSetRxTxEn */
-#endif /* YUKON */
-
-
-#ifndef SK_SLIM
-/******************************************************************************
- *
- * SkMacSetRxTxEn() - Special Set Rx/Tx Enable and parameters
- *
- * Description: calls the Special Set Rx/Tx Enable routines dep. on board type
- *
- * Returns: N/A
- */
-void SkMacSetRxTxEn(
-SK_AC *pAC, /* Adapter Context */
-SK_IOC IoC, /* IO context */
-int Port, /* Port Index (MAC_1 + n) */
-int Para)
-{
-#ifdef GENESIS
- if (pAC->GIni.GIGenesis) {
-
- SkXmSetRxTxEn(pAC, IoC, Port, Para);
- }
-#endif /* GENESIS */
-
-#ifdef YUKON
- if (pAC->GIni.GIYukon) {
-
- SkGmSetRxTxEn(pAC, IoC, Port, Para);
- }
-#endif /* YUKON */
-
-} /* SkMacSetRxTxEn */
-#endif /* !SK_SLIM */
-
-
/******************************************************************************
*
* SkMacRxTxEnable() - Enable Rx/Tx activity if port is up
@@ -3976,7 +3529,7 @@
* Returns:
* nothing
*/
-void SkXmIrq(
+static void SkXmIrq(
SK_AC *pAC, /* adapter context */
SK_IOC IoC, /* IO context */
int Port) /* Port Index (MAC_1 + n) */
@@ -4112,7 +3665,7 @@
* Returns:
* nothing
*/
-void SkGmIrq(
+static void SkGmIrq(
SK_AC *pAC, /* adapter context */
SK_IOC IoC, /* IO context */
int Port) /* Port Index (MAC_1 + n) */
diff --git a/drivers/net/skfp/fplustm.c b/drivers/net/skfp/fplustm.c
index a2ed47f..a4b2b69 100644
--- a/drivers/net/skfp/fplustm.c
+++ b/drivers/net/skfp/fplustm.c
@@ -89,21 +89,21 @@
/*
* useful interrupt bits
*/
-static int mac_imsk1u = FM_STXABRS | FM_STXABRA0 | FM_SXMTABT ;
-static int mac_imsk1l = FM_SQLCKS | FM_SQLCKA0 | FM_SPCEPDS | FM_SPCEPDA0|
+static const int mac_imsk1u = FM_STXABRS | FM_STXABRA0 | FM_SXMTABT ;
+static const int mac_imsk1l = FM_SQLCKS | FM_SQLCKA0 | FM_SPCEPDS | FM_SPCEPDA0|
FM_STBURS | FM_STBURA0 ;
/* delete FM_SRBFL after tests */
-static int mac_imsk2u = FM_SERRSF | FM_SNFSLD | FM_SRCVOVR | FM_SRBFL |
+static const int mac_imsk2u = FM_SERRSF | FM_SNFSLD | FM_SRCVOVR | FM_SRBFL |
FM_SMYCLM ;
-static int mac_imsk2l = FM_STRTEXR | FM_SDUPCLM | FM_SFRMCTR |
+static const int mac_imsk2l = FM_STRTEXR | FM_SDUPCLM | FM_SFRMCTR |
FM_SERRCTR | FM_SLSTCTR |
FM_STRTEXP | FM_SMULTDA | FM_SRNGOP ;
-static int mac_imsk3u = FM_SRCVOVR2 | FM_SRBFL2 ;
-static int mac_imsk3l = FM_SRPERRQ2 | FM_SRPERRQ1 ;
+static const int mac_imsk3u = FM_SRCVOVR2 | FM_SRBFL2 ;
+static const int mac_imsk3l = FM_SRPERRQ2 | FM_SRPERRQ1 ;
-static int mac_beacon_imsk2u = FM_SOTRBEC | FM_SMYBEC | FM_SBEC |
+static const int mac_beacon_imsk2u = FM_SOTRBEC | FM_SMYBEC | FM_SBEC |
FM_SLOCLM | FM_SHICLM | FM_SMYCLM | FM_SCLM ;
diff --git a/drivers/net/skfp/pcmplc.c b/drivers/net/skfp/pcmplc.c
index cd0aa4c..74e129f 100644
--- a/drivers/net/skfp/pcmplc.c
+++ b/drivers/net/skfp/pcmplc.c
@@ -186,7 +186,7 @@
* Do we need the EBUF error during signaling, too, to detect SUPERNET_3
* PLL bug?
*/
-static int plc_imsk_na = PL_PCM_CODE | PL_TRACE_PROP | PL_PCM_BREAK |
+static const int plc_imsk_na = PL_PCM_CODE | PL_TRACE_PROP | PL_PCM_BREAK |
PL_PCM_ENABLED | PL_SELF_TEST | PL_EBUF_ERR;
#else /* SUPERNET_3 */
/*
@@ -195,7 +195,7 @@
static int plc_imsk_na = PL_PCM_CODE | PL_TRACE_PROP | PL_PCM_BREAK |
PL_PCM_ENABLED | PL_SELF_TEST ;
#endif /* SUPERNET_3 */
-static int plc_imsk_act = PL_PCM_CODE | PL_TRACE_PROP | PL_PCM_BREAK |
+static const int plc_imsk_act = PL_PCM_CODE | PL_TRACE_PROP | PL_PCM_BREAK |
PL_PCM_ENABLED | PL_SELF_TEST | PL_EBUF_ERR;
/* external functions */
diff --git a/drivers/net/skfp/skfddi.c b/drivers/net/skfp/skfddi.c
index 4b5ed2c..c7fb613 100644
--- a/drivers/net/skfp/skfddi.c
+++ b/drivers/net/skfp/skfddi.c
@@ -67,7 +67,7 @@
/* each new release!!! */
#define VERSION "2.07"
-static const char *boot_msg =
+static const char * const boot_msg =
"SysKonnect FDDI PCI Adapter driver v" VERSION " for\n"
" SK-55xx/SK-58xx adapters (SK-NET FDDI-FP/UP/LP)";
diff --git a/drivers/net/starfire.c b/drivers/net/starfire.c
index d167ded..35b1805 100644
--- a/drivers/net/starfire.c
+++ b/drivers/net/starfire.c
@@ -201,7 +201,7 @@
static int mtu;
/* Maximum number of multicast addresses to filter (vs. rx-all-multicast).
The Starfire has a 512 element hash table based on the Ethernet CRC. */
-static int multicast_filter_limit = 512;
+static const int multicast_filter_limit = 512;
/* Whether to do TCP/UDP checksums in hardware */
static int enable_hw_cksum = 1;
@@ -463,7 +463,7 @@
MODULE_DEVICE_TABLE(pci, starfire_pci_tbl);
/* A chip capabilities table, matching the CH_xxx entries in xxx_pci_tbl[] above. */
-static struct chip_info {
+static const struct chip_info {
const char *name;
int drv_flags;
} netdrv_tbl[] __devinitdata = {
@@ -2084,6 +2084,38 @@
return 0;
}
+#ifdef CONFIG_PM
+static int starfire_suspend(struct pci_dev *pdev, pm_message_t state)
+{
+ struct net_device *dev = pci_get_drvdata(pdev);
+
+ if (netif_running(dev)) {
+ netif_device_detach(dev);
+ netdev_close(dev);
+ }
+
+ pci_save_state(pdev);
+ pci_set_power_state(pdev, pci_choose_state(pdev,state));
+
+ return 0;
+}
+
+static int starfire_resume(struct pci_dev *pdev)
+{
+ struct net_device *dev = pci_get_drvdata(pdev);
+
+ pci_set_power_state(pdev, PCI_D0);
+ pci_restore_state(pdev);
+
+ if (netif_running(dev)) {
+ netdev_open(dev);
+ netif_device_attach(dev);
+ }
+
+ return 0;
+}
+#endif /* CONFIG_PM */
+
static void __devexit starfire_remove_one (struct pci_dev *pdev)
{
@@ -2115,6 +2147,10 @@
.name = DRV_NAME,
.probe = starfire_init_one,
.remove = __devexit_p(starfire_remove_one),
+#ifdef CONFIG_PM
+ .suspend = starfire_suspend,
+ .resume = starfire_resume,
+#endif /* CONFIG_PM */
.id_table = starfire_pci_tbl,
};
diff --git a/drivers/net/sundance.c b/drivers/net/sundance.c
index 0ab9c38..61eec46 100644
--- a/drivers/net/sundance.c
+++ b/drivers/net/sundance.c
@@ -106,7 +106,7 @@
static int debug = 1; /* 1 normal messages, 0 quiet .. 7 verbose. */
/* Maximum number of multicast addresses to filter (vs. rx-all-multicast).
Typical is a 64 element hash table based on the Ethernet CRC. */
-static int multicast_filter_limit = 32;
+static const int multicast_filter_limit = 32;
/* Set the copy breakpoint for the copy-only-tiny-frames scheme.
Setting to > 1518 effectively disables this feature.
@@ -298,7 +298,7 @@
struct pci_id_info {
const char *name;
};
-static struct pci_id_info pci_id_tbl[] = {
+static const struct pci_id_info pci_id_tbl[] = {
{"D-Link DFE-550TX FAST Ethernet Adapter"},
{"D-Link DFE-550FX 100Mbps Fiber-optics Adapter"},
{"D-Link DFE-580TX 4 port Server Adapter"},
@@ -633,9 +633,13 @@
np->phys[0] = 1; /* Default setting */
np->mii_preamble_required++;
+ /*
+ * It seems some phys doesn't deal well with address 0 being accessed
+ * first, so leave address zero to the end of the loop (32 & 31).
+ */
for (phy = 1; phy <= 32 && phy_idx < MII_CNT; phy++) {
- int mii_status = mdio_read(dev, phy, MII_BMSR);
int phyx = phy & 0x1f;
+ int mii_status = mdio_read(dev, phyx, MII_BMSR);
if (mii_status != 0xffff && mii_status != 0x0000) {
np->phys[phy_idx++] = phyx;
np->mii_if.advertising = mdio_read(dev, phyx, MII_ADVERTISE);
diff --git a/drivers/net/sungem_phy.c b/drivers/net/sungem_phy.c
index d3ddb41..cb0aba9 100644
--- a/drivers/net/sungem_phy.c
+++ b/drivers/net/sungem_phy.c
@@ -39,7 +39,7 @@
#include "sungem_phy.h"
/* Link modes of the BCM5400 PHY */
-static int phy_BCM5400_link_table[8][3] = {
+static const int phy_BCM5400_link_table[8][3] = {
{ 0, 0, 0 }, /* No link */
{ 0, 0, 0 }, /* 10BT Half Duplex */
{ 1, 0, 0 }, /* 10BT Full Duplex */
diff --git a/drivers/net/tg3.c b/drivers/net/tg3.c
index e8e92c8..83ff599 100644
--- a/drivers/net/tg3.c
+++ b/drivers/net/tg3.c
@@ -7785,7 +7785,7 @@
}
/* Only test the commonly used registers */
-static int tg3_test_registers(struct tg3 *tp)
+static const int tg3_test_registers(struct tg3 *tp)
{
int i, is_5705;
u32 offset, read_mask, write_mask, val, save_val, read_val;
@@ -7999,7 +7999,7 @@
static int tg3_do_mem_test(struct tg3 *tp, u32 offset, u32 len)
{
- static u32 test_pattern[] = { 0x00000000, 0xffffffff, 0xaa55a55a };
+ static const u32 test_pattern[] = { 0x00000000, 0xffffffff, 0xaa55a55a };
int i;
u32 j;
diff --git a/drivers/net/tokenring/lanstreamer.c b/drivers/net/tokenring/lanstreamer.c
index 97712c3..c58a4c3 100644
--- a/drivers/net/tokenring/lanstreamer.c
+++ b/drivers/net/tokenring/lanstreamer.c
@@ -122,6 +122,7 @@
#include <linux/spinlock.h>
#include <linux/version.h>
#include <linux/bitops.h>
+#include <linux/jiffies.h>
#include <net/checksum.h>
@@ -512,7 +513,7 @@
while (!((readw(streamer_mmio + SISR)) & SISR_SRB_REPLY)) {
msleep_interruptible(100);
- if (jiffies - t > 40 * HZ) {
+ if (time_after(jiffies, t + 40 * HZ)) {
printk(KERN_ERR
"IBM PCI tokenring card not responding\n");
release_region(dev->base_addr, STREAMER_IO_SPACE);
diff --git a/drivers/net/tokenring/olympic.c b/drivers/net/tokenring/olympic.c
index 05477d2..23032a7 100644
--- a/drivers/net/tokenring/olympic.c
+++ b/drivers/net/tokenring/olympic.c
@@ -100,6 +100,7 @@
#include <linux/pci.h>
#include <linux/spinlock.h>
#include <linux/bitops.h>
+#include <linux/jiffies.h>
#include <net/checksum.h>
@@ -307,7 +308,7 @@
t=jiffies;
while((readl(olympic_mmio+BCTL)) & BCTL_SOFTRESET) {
schedule();
- if(jiffies-t > 40*HZ) {
+ if(time_after(jiffies, t + 40*HZ)) {
printk(KERN_ERR "IBM PCI tokenring card not responding.\n");
return -ENODEV;
}
@@ -359,7 +360,7 @@
t=jiffies;
while (!readl(olympic_mmio+CLKCTL) & CLKCTL_PAUSE) {
schedule() ;
- if(jiffies-t > 2*HZ) {
+ if(time_after(jiffies, t + 2*HZ)) {
printk(KERN_ERR "IBM Cardbus tokenring adapter not responsing.\n") ;
return -ENODEV;
}
@@ -373,7 +374,7 @@
t=jiffies;
while(!((readl(olympic_mmio+SISR_RR)) & SISR_SRB_REPLY)) {
schedule();
- if(jiffies-t > 15*HZ) {
+ if(time_after(jiffies, t + 15*HZ)) {
printk(KERN_ERR "IBM PCI tokenring card not responding.\n");
return -ENODEV;
}
@@ -519,7 +520,7 @@
olympic_priv->srb_queued=0;
break;
}
- if ((jiffies-t) > 10*HZ) {
+ if (time_after(jiffies, t + 10*HZ)) {
printk(KERN_WARNING "%s: SRB timed out. \n",dev->name) ;
olympic_priv->srb_queued=0;
break ;
diff --git a/drivers/net/tulip/de2104x.c b/drivers/net/tulip/de2104x.c
index d7fb3ff..d6c3d52 100644
--- a/drivers/net/tulip/de2104x.c
+++ b/drivers/net/tulip/de2104x.c
@@ -402,8 +402,7 @@
unsigned copying_skb, buflen;
skb = de->rx_skb[rx_tail].skb;
- if (!skb)
- BUG();
+ BUG_ON(!skb);
rmb();
status = le32_to_cpu(de->rx_ring[rx_tail].opts1);
if (status & DescOwn)
@@ -545,8 +544,7 @@
break;
skb = de->tx_skb[tx_tail].skb;
- if (!skb)
- BUG();
+ BUG_ON(!skb);
if (unlikely(skb == DE_DUMMY_SKB))
goto next;
@@ -789,8 +787,7 @@
de->tx_head = NEXT_TX(entry);
- if (TX_BUFFS_AVAIL(de) < 0)
- BUG();
+ BUG_ON(TX_BUFFS_AVAIL(de) < 0);
if (TX_BUFFS_AVAIL(de) == 0)
netif_stop_queue(dev);
@@ -916,8 +913,7 @@
unsigned media = de->media_type;
u32 macmode = dr32(MacMode);
- if (de_is_running(de))
- BUG();
+ BUG_ON(de_is_running(de));
if (de->de21040)
dw32(CSR11, FULL_DUPLEX_MAGIC);
@@ -1153,8 +1149,7 @@
return;
}
- if (!(status & LinkFail))
- BUG();
+ BUG_ON(!(status & LinkFail));
if (netif_carrier_ok(de->dev)) {
de_link_down(de);
@@ -2092,8 +2087,7 @@
struct net_device *dev = pci_get_drvdata(pdev);
struct de_private *de = dev->priv;
- if (!dev)
- BUG();
+ BUG_ON(!dev);
unregister_netdev(dev);
kfree(de->ee_data);
iounmap(de->regs);
diff --git a/drivers/net/tulip/pnic.c b/drivers/net/tulip/pnic.c
index d9980bd..ca7e532 100644
--- a/drivers/net/tulip/pnic.c
+++ b/drivers/net/tulip/pnic.c
@@ -16,6 +16,7 @@
#include <linux/kernel.h>
#include <linux/pci.h>
+#include <linux/jiffies.h>
#include "tulip.h"
@@ -68,7 +69,7 @@
*/
if (tulip_media_cap[dev->if_port] & MediaIsMII)
return;
- if (! tp->nwayset || jiffies - dev->trans_start > 1*HZ) {
+ if (! tp->nwayset || time_after(jiffies, dev->trans_start + 1*HZ)) {
tp->csr6 = 0x00420000 | (tp->csr6 & 0x0000fdff);
iowrite32(tp->csr6, ioaddr + CSR6);
iowrite32(0x30, ioaddr + CSR12);
diff --git a/drivers/net/tulip/winbond-840.c b/drivers/net/tulip/winbond-840.c
index 5b1af39..ba05ded 100644
--- a/drivers/net/tulip/winbond-840.c
+++ b/drivers/net/tulip/winbond-840.c
@@ -1645,7 +1645,7 @@
/* no more hardware accesses behind this line. */
- if (np->csr6) BUG();
+ BUG_ON(np->csr6);
if (ioread32(ioaddr + IntrEnable)) BUG();
/* pci_power_off(pdev, -1); */
diff --git a/drivers/net/tulip/xircom_cb.c b/drivers/net/tulip/xircom_cb.c
index 60d1e05..5634410 100644
--- a/drivers/net/tulip/xircom_cb.c
+++ b/drivers/net/tulip/xircom_cb.c
@@ -32,6 +32,9 @@
#include <asm/uaccess.h>
#include <asm/io.h>
+#ifdef CONFIG_NET_POLL_CONTROLLER
+#include <asm/irq.h>
+#endif
#ifdef DEBUG
#define enter(x) printk("Enter: %s, %s line %i\n",x,__FILE__,__LINE__)
@@ -598,10 +601,8 @@
enter("setup_descriptors");
- if (card->rx_buffer == NULL)
- BUG();
- if (card->tx_buffer == NULL)
- BUG();
+ BUG_ON(card->rx_buffer == NULL);
+ BUG_ON(card->tx_buffer == NULL);
/* Receive descriptors */
memset(card->rx_buffer, 0, 128); /* clear the descriptors */
diff --git a/drivers/net/typhoon.c b/drivers/net/typhoon.c
index 4c76cb7..cde35dd 100644
--- a/drivers/net/typhoon.c
+++ b/drivers/net/typhoon.c
@@ -178,7 +178,7 @@
};
/* directly indexed by enum typhoon_cards, above */
-static struct typhoon_card_info typhoon_card_info[] __devinitdata = {
+static const struct typhoon_card_info typhoon_card_info[] __devinitdata = {
{ "3Com Typhoon (3C990-TX)",
TYPHOON_CRYPTO_NONE},
{ "3Com Typhoon (3CR990-TX-95)",
diff --git a/drivers/net/wan/Kconfig b/drivers/net/wan/Kconfig
index 18c27e1..883cf7d 100644
--- a/drivers/net/wan/Kconfig
+++ b/drivers/net/wan/Kconfig
@@ -459,7 +459,7 @@
bool "WANPIPE Frame Relay support"
depends on VENDOR_SANGOMA
help
- Connect a WANPIPE card to a Frame Relay network, or use Frame Felay
+ Connect a WANPIPE card to a Frame Relay network, or use Frame Relay
API to develop custom applications.
Contains the Ethernet Bridging over Frame Relay feature, where
diff --git a/drivers/net/wan/hostess_sv11.c b/drivers/net/wan/hostess_sv11.c
index 7db1d1d..cf5c805 100644
--- a/drivers/net/wan/hostess_sv11.c
+++ b/drivers/net/wan/hostess_sv11.c
@@ -29,6 +29,7 @@
#include <linux/ioport.h>
#include <net/arp.h>
+#include <asm/irq.h>
#include <asm/io.h>
#include <asm/dma.h>
#include <asm/byteorder.h>
diff --git a/drivers/net/wan/sealevel.c b/drivers/net/wan/sealevel.c
index 5380ddf..050e854 100644
--- a/drivers/net/wan/sealevel.c
+++ b/drivers/net/wan/sealevel.c
@@ -23,6 +23,7 @@
#include <linux/init.h>
#include <net/arp.h>
+#include <asm/irq.h>
#include <asm/io.h>
#include <asm/dma.h>
#include <asm/byteorder.h>
diff --git a/drivers/net/wireless/Kconfig b/drivers/net/wireless/Kconfig
index ef85d76..5b0a19a 100644
--- a/drivers/net/wireless/Kconfig
+++ b/drivers/net/wireless/Kconfig
@@ -6,7 +6,8 @@
depends on NETDEVICES
config NET_RADIO
- bool "Wireless LAN drivers (non-hamradio) & Wireless Extensions"
+ bool "Wireless LAN drivers (non-hamradio)"
+ select WIRELESS_EXT
---help---
Support for wireless LANs and everything having to do with radio,
but not with amateur radio or FM broadcasting.
@@ -135,8 +136,9 @@
config IPW2100
tristate "Intel PRO/Wireless 2100 Network Connection"
- depends on NET_RADIO && PCI && IEEE80211
+ depends on NET_RADIO && PCI
select FW_LOADER
+ select IEEE80211
---help---
A driver for the Intel PRO/Wireless 2100 Network
Connection 802.11b wireless network adapter.
@@ -188,8 +190,9 @@
config IPW2200
tristate "Intel PRO/Wireless 2200BG and 2915ABG Network Connection"
- depends on NET_RADIO && IEEE80211 && PCI
+ depends on NET_RADIO && PCI
select FW_LOADER
+ select IEEE80211
---help---
A driver for the Intel PRO/Wireless 2200BG and 2915ABG Network
Connection adapters.
@@ -201,7 +204,7 @@
In order to use this driver, you will need a firmware image for it.
You can obtain the firmware from
<http://ipw2200.sf.net/>. See the above referenced README.ipw2200
- for information on where to install the firmare images.
+ for information on where to install the firmware images.
You will also very likely need the Wireless Tools in order to
configure your card:
@@ -213,6 +216,19 @@
say M here and read <file:Documentation/modules.txt>. The module
will be called ipw2200.ko.
+config IPW2200_MONITOR
+ bool "Enable promiscuous mode"
+ depends on IPW2200
+ ---help---
+ Enables promiscuous/monitor mode support for the ipw2200 driver.
+ With this feature compiled into the driver, you can switch to
+ promiscuous mode via the Wireless Tool's Monitor mode. While in this
+ mode, no packets can be sent.
+
+config IPW_QOS
+ bool "Enable QoS support"
+ depends on IPW2200 && EXPERIMENTAL
+
config IPW2200_DEBUG
bool "Enable full debugging output in IPW2200 module."
depends on IPW2200
@@ -239,13 +255,14 @@
config AIRO
tristate "Cisco/Aironet 34X/35X/4500/4800 ISA and PCI cards"
- depends on NET_RADIO && ISA_DMA_API && CRYPTO && (PCI || BROKEN)
+ depends on NET_RADIO && ISA_DMA_API && (PCI || BROKEN)
+ select CRYPTO
---help---
This is the standard Linux driver to support Cisco/Aironet ISA and
PCI 802.11 wireless cards.
It supports the new 802.11b cards from Cisco (Cisco 34X, Cisco 35X
- with or without encryption) as well as card before the Cisco
- aquisition (Aironet 4500, Aironet 4800, Aironet 4800B).
+ acquisition (Aironet 4500, Aironet 4800, Aironet 4800B).
This driver support both the standard Linux Wireless Extensions
and Cisco proprietary API, so both the Linux Wireless Tools and the
@@ -387,13 +404,14 @@
config AIRO_CS
tristate "Cisco/Aironet 34X/35X/4500/4800 PCMCIA cards"
depends on NET_RADIO && PCMCIA && (BROKEN || !M32R)
+ select CRYPTO
---help---
This is the standard Linux driver to support Cisco/Aironet PCMCIA
802.11 wireless cards. This driver is the same as the Aironet
driver part of the Linux Pcmcia package.
It supports the new 802.11b cards from Cisco (Cisco 34X, Cisco 35X
- with or without encryption) as well as card before the Cisco
- aquisition (Aironet 4500, Aironet 4800, Aironet 4800B). It also
+ acquisition (Aironet 4500, Aironet 4800, Aironet 4800B). It also
supports OEM of Cisco such as the DELL TrueMobile 4800 and Xircom
802.11b cards.
diff --git a/drivers/net/wireless/airo.c b/drivers/net/wireless/airo.c
index a4c7ae9..864937a 100644
--- a/drivers/net/wireless/airo.c
+++ b/drivers/net/wireless/airo.c
@@ -36,6 +36,7 @@
#include <linux/in.h>
#include <linux/bitops.h>
#include <linux/scatterlist.h>
+#include <linux/crypto.h>
#include <asm/io.h>
#include <asm/system.h>
@@ -87,14 +88,6 @@
#include <linux/delay.h>
#endif
-/* Support Cisco MIC feature */
-#define MICSUPPORT
-
-#if defined(MICSUPPORT) && !defined(CONFIG_CRYPTO)
-#warning MIC support requires Crypto API
-#undef MICSUPPORT
-#endif
-
/* Hack to do some power saving */
#define POWER_ON_DOWN
@@ -1118,7 +1111,6 @@
static int writerids(struct net_device *dev, aironet_ioctl *comp);
static int flashcard(struct net_device *dev, aironet_ioctl *comp);
#endif /* CISCO_EXT */
-#ifdef MICSUPPORT
static void micinit(struct airo_info *ai);
static int micsetup(struct airo_info *ai);
static int encapsulate(struct airo_info *ai, etherHead *pPacket, MICBuffer *buffer, int len);
@@ -1127,9 +1119,6 @@
static u8 airo_rssi_to_dbm (tdsRssiEntry *rssi_rid, u8 rssi);
static u8 airo_dbm_to_pct (tdsRssiEntry *rssi_rid, u8 dbm);
-#include <linux/crypto.h>
-#endif
-
struct airo_info {
struct net_device_stats stats;
struct net_device *dev;
@@ -1190,12 +1179,10 @@
unsigned long scan_timestamp; /* Time started to scan */
struct iw_spy_data spy_data;
struct iw_public_data wireless_data;
-#ifdef MICSUPPORT
/* MIC stuff */
struct crypto_tfm *tfm;
mic_module mod[2];
mic_statistics micstats;
-#endif
HostRxDesc rxfids[MPI_MAX_FIDS]; // rx/tx/config MPI350 descriptors
HostTxDesc txfids[MPI_MAX_FIDS];
HostRidDesc config_desc;
@@ -1229,7 +1216,6 @@
static int flashputbuf(struct airo_info *ai);
static int flashrestart(struct airo_info *ai,struct net_device *dev);
-#ifdef MICSUPPORT
/***********************************************************************
* MIC ROUTINES *
***********************************************************************
@@ -1686,7 +1672,6 @@
digest[2] = (val>>8) & 0xFF;
digest[3] = val & 0xFF;
}
-#endif
static int readBSSListRid(struct airo_info *ai, int first,
BSSListRid *list) {
@@ -2005,7 +1990,6 @@
* Firmware automaticly puts 802 header on so
* we don't need to account for it in the length
*/
-#ifdef MICSUPPORT
if (test_bit(FLAG_MIC_CAPABLE, &ai->flags) && ai->micstats.enabled &&
(ntohs(((u16 *)buffer)[6]) != 0x888E)) {
MICBuffer pMic;
@@ -2022,9 +2006,7 @@
memcpy (sendbuf, &pMic, sizeof(pMic));
sendbuf += sizeof(pMic);
memcpy (sendbuf, buffer, len - sizeof(etherHead));
- } else
-#endif
- {
+ } else {
*payloadLen = cpu_to_le16(len - sizeof(etherHead));
dev->trans_start = jiffies;
@@ -2400,9 +2382,7 @@
ai->shared, ai->shared_dma);
}
}
-#ifdef MICSUPPORT
crypto_free_tfm(ai->tfm);
-#endif
del_airo_dev( dev );
free_netdev( dev );
}
@@ -2726,9 +2706,7 @@
ai->thr_pid = kernel_thread(airo_thread, dev, CLONE_FS | CLONE_FILES);
if (ai->thr_pid < 0)
goto err_out_free;
-#ifdef MICSUPPORT
ai->tfm = NULL;
-#endif
rc = add_airo_dev( dev );
if (rc)
goto err_out_thr;
@@ -2969,10 +2947,8 @@
airo_read_wireless_stats(ai);
else if (test_bit(JOB_PROMISC, &ai->flags))
airo_set_promisc(ai);
-#ifdef MICSUPPORT
else if (test_bit(JOB_MIC, &ai->flags))
micinit(ai);
-#endif
else if (test_bit(JOB_EVENT, &ai->flags))
airo_send_event(dev);
else if (test_bit(JOB_AUTOWEP, &ai->flags))
@@ -3010,12 +2986,10 @@
if ( status & EV_MIC ) {
OUT4500( apriv, EVACK, EV_MIC );
-#ifdef MICSUPPORT
if (test_bit(FLAG_MIC_CAPABLE, &apriv->flags)) {
set_bit(JOB_MIC, &apriv->flags);
wake_up_interruptible(&apriv->thr_wait);
}
-#endif
}
if ( status & EV_LINK ) {
union iwreq_data wrqu;
@@ -3194,11 +3168,8 @@
}
bap_read (apriv, buffer + hdrlen/2, len, BAP0);
} else {
-#ifdef MICSUPPORT
MICBuffer micbuf;
-#endif
bap_read (apriv, buffer, ETH_ALEN*2, BAP0);
-#ifdef MICSUPPORT
if (apriv->micstats.enabled) {
bap_read (apriv,(u16*)&micbuf,sizeof(micbuf),BAP0);
if (ntohs(micbuf.typelen) > 0x05DC)
@@ -3211,15 +3182,10 @@
skb_trim (skb, len + hdrlen);
}
}
-#endif
bap_read(apriv,buffer+ETH_ALEN,len,BAP0);
-#ifdef MICSUPPORT
if (decapsulate(apriv,&micbuf,(etherHead*)buffer,len)) {
badmic:
dev_kfree_skb_irq (skb);
-#else
- if (0) {
-#endif
badrx:
OUT4500( apriv, EVACK, EV_RX);
goto exitrx;
@@ -3430,10 +3396,8 @@
int len = 0;
struct sk_buff *skb;
char *buffer;
-#ifdef MICSUPPORT
int off = 0;
MICBuffer micbuf;
-#endif
memcpy_fromio(&rxd, ai->rxfids[0].card_ram_off, sizeof(rxd));
/* Make sure we got something */
@@ -3448,7 +3412,6 @@
goto badrx;
}
buffer = skb_put(skb,len);
-#ifdef MICSUPPORT
memcpy(buffer, ai->rxfids[0].virtual_host_addr, ETH_ALEN * 2);
if (ai->micstats.enabled) {
memcpy(&micbuf,
@@ -3470,9 +3433,6 @@
dev_kfree_skb_irq (skb);
goto badrx;
}
-#else
- memcpy(buffer, ai->rxfids[0].virtual_host_addr, len);
-#endif
#ifdef WIRELESS_SPY
if (ai->spy_data.spy_number > 0) {
char *sa;
@@ -3689,13 +3649,11 @@
ai->config.authType = AUTH_OPEN;
ai->config.modulation = MOD_CCK;
-#ifdef MICSUPPORT
if ((cap_rid.len>=sizeof(cap_rid)) && (cap_rid.extSoftCap&1) &&
(micsetup(ai) == SUCCESS)) {
ai->config.opmode |= MODE_MIC;
set_bit(FLAG_MIC_CAPABLE, &ai->flags);
}
-#endif
/* Save off the MAC */
for( i = 0; i < ETH_ALEN; i++ ) {
@@ -4170,15 +4128,12 @@
}
len -= ETH_ALEN * 2;
-#ifdef MICSUPPORT
if (test_bit(FLAG_MIC_CAPABLE, &ai->flags) && ai->micstats.enabled &&
(ntohs(((u16 *)pPacket)[6]) != 0x888E)) {
if (encapsulate(ai,(etherHead *)pPacket,&pMic,len) != SUCCESS)
return ERROR;
miclen = sizeof(pMic);
}
-#endif
-
// packet is destination[6], source[6], payload[len-12]
// write the payload length and dst/src/payload
if (bap_setup(ai, txFid, 0x0036, BAP1) != SUCCESS) return ERROR;
@@ -5081,7 +5036,6 @@
wkr.len = sizeof(wkr);
wkr.kindex = 0xffff;
wkr.mac[0] = (char)index;
- if (perm) printk(KERN_INFO "Setting transmit key to %d\n", index);
if (perm) ai->defindex = (char)index;
} else {
// We are actually setting the key
@@ -5090,7 +5044,6 @@
wkr.klen = keylen;
memcpy( wkr.key, key, keylen );
memcpy( wkr.mac, macaddr, ETH_ALEN );
- printk(KERN_INFO "Setting key %d\n", index);
}
if (perm) disable_MAC(ai, lock);
@@ -5801,11 +5754,13 @@
Cmd cmd;
Resp rsp;
APListRid APList_rid;
- static const unsigned char bcast[ETH_ALEN] = { 255, 255, 255, 255, 255, 255 };
+ static const u8 any[ETH_ALEN] = { 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF };
+ static const u8 off[ETH_ALEN] = { 0x00, 0x00, 0x00, 0x00, 0x00, 0x00 };
if (awrq->sa_family != ARPHRD_ETHER)
return -EINVAL;
- else if (!memcmp(bcast, awrq->sa_data, ETH_ALEN)) {
+ else if (!memcmp(any, awrq->sa_data, ETH_ALEN) ||
+ !memcmp(off, awrq->sa_data, ETH_ALEN)) {
memset(&cmd, 0, sizeof(cmd));
cmd.cmd=CMD_LOSE_SYNC;
if (down_interruptible(&local->sem))
@@ -6296,6 +6251,272 @@
/*------------------------------------------------------------------*/
/*
+ * Wireless Handler : set extended Encryption parameters
+ */
+static int airo_set_encodeext(struct net_device *dev,
+ struct iw_request_info *info,
+ union iwreq_data *wrqu,
+ char *extra)
+{
+ struct airo_info *local = dev->priv;
+ struct iw_point *encoding = &wrqu->encoding;
+ struct iw_encode_ext *ext = (struct iw_encode_ext *)extra;
+ CapabilityRid cap_rid; /* Card capability info */
+ int perm = ( encoding->flags & IW_ENCODE_TEMP ? 0 : 1 );
+ u16 currentAuthType = local->config.authType;
+ int idx, key_len, alg = ext->alg, set_key = 1;
+ wep_key_t key;
+
+ /* Is WEP supported ? */
+ readCapabilityRid(local, &cap_rid, 1);
+ /* Older firmware doesn't support this...
+ if(!(cap_rid.softCap & 2)) {
+ return -EOPNOTSUPP;
+ } */
+ readConfigRid(local, 1);
+
+ /* Determine and validate the key index */
+ idx = encoding->flags & IW_ENCODE_INDEX;
+ if (idx) {
+ if (idx < 1 || idx > ((cap_rid.softCap & 0x80) ? 4:1))
+ return -EINVAL;
+ idx--;
+ } else
+ idx = get_wep_key(local, 0xffff);
+
+ if (encoding->flags & IW_ENCODE_DISABLED)
+ alg = IW_ENCODE_ALG_NONE;
+
+ if (ext->ext_flags & IW_ENCODE_EXT_SET_TX_KEY) {
+ /* Only set transmit key index here, actual
+ * key is set below if needed.
+ */
+ set_wep_key(local, idx, NULL, 0, perm, 1);
+ set_key = ext->key_len > 0 ? 1 : 0;
+ }
+
+ if (set_key) {
+ /* Set the requested key first */
+ memset(key.key, 0, MAX_KEY_SIZE);
+ switch (alg) {
+ case IW_ENCODE_ALG_NONE:
+ key.len = 0;
+ break;
+ case IW_ENCODE_ALG_WEP:
+ if (ext->key_len > MIN_KEY_SIZE) {
+ key.len = MAX_KEY_SIZE;
+ } else if (ext->key_len > 0) {
+ key.len = MIN_KEY_SIZE;
+ } else {
+ return -EINVAL;
+ }
+ key_len = min (ext->key_len, key.len);
+ memcpy(key.key, ext->key, key_len);
+ break;
+ default:
+ return -EINVAL;
+ }
+ /* Send the key to the card */
+ set_wep_key(local, idx, key.key, key.len, perm, 1);
+ }
+
+ /* Read the flags */
+ if(encoding->flags & IW_ENCODE_DISABLED)
+ local->config.authType = AUTH_OPEN; // disable encryption
+ if(encoding->flags & IW_ENCODE_RESTRICTED)
+ local->config.authType = AUTH_SHAREDKEY; // Only Both
+ if(encoding->flags & IW_ENCODE_OPEN)
+ local->config.authType = AUTH_ENCRYPT; // Only Wep
+ /* Commit the changes to flags if needed */
+ if (local->config.authType != currentAuthType)
+ set_bit (FLAG_COMMIT, &local->flags);
+
+ return -EINPROGRESS;
+}
+
+
+/*------------------------------------------------------------------*/
+/*
+ * Wireless Handler : get extended Encryption parameters
+ */
+static int airo_get_encodeext(struct net_device *dev,
+ struct iw_request_info *info,
+ union iwreq_data *wrqu,
+ char *extra)
+{
+ struct airo_info *local = dev->priv;
+ struct iw_point *encoding = &wrqu->encoding;
+ struct iw_encode_ext *ext = (struct iw_encode_ext *)extra;
+ CapabilityRid cap_rid; /* Card capability info */
+ int idx, max_key_len;
+
+ /* Is it supported ? */
+ readCapabilityRid(local, &cap_rid, 1);
+ if(!(cap_rid.softCap & 2)) {
+ return -EOPNOTSUPP;
+ }
+ readConfigRid(local, 1);
+
+ max_key_len = encoding->length - sizeof(*ext);
+ if (max_key_len < 0)
+ return -EINVAL;
+
+ idx = encoding->flags & IW_ENCODE_INDEX;
+ if (idx) {
+ if (idx < 1 || idx > ((cap_rid.softCap & 0x80) ? 4:1))
+ return -EINVAL;
+ idx--;
+ } else
+ idx = get_wep_key(local, 0xffff);
+
+ encoding->flags = idx + 1;
+ memset(ext, 0, sizeof(*ext));
+
+ /* Check encryption mode */
+ switch(local->config.authType) {
+ case AUTH_ENCRYPT:
+ encoding->flags = IW_ENCODE_ALG_WEP | IW_ENCODE_ENABLED;
+ break;
+ case AUTH_SHAREDKEY:
+ encoding->flags = IW_ENCODE_ALG_WEP | IW_ENCODE_ENABLED;
+ break;
+ default:
+ case AUTH_OPEN:
+ encoding->flags = IW_ENCODE_ALG_NONE | IW_ENCODE_DISABLED;
+ break;
+ }
+ /* We can't return the key, so set the proper flag and return zero */
+ encoding->flags |= IW_ENCODE_NOKEY;
+ memset(extra, 0, 16);
+
+ /* Copy the key to the user buffer */
+ ext->key_len = get_wep_key(local, idx);
+ if (ext->key_len > 16) {
+ ext->key_len=0;
+ }
+
+ return 0;
+}
+
+
+/*------------------------------------------------------------------*/
+/*
+ * Wireless Handler : set extended authentication parameters
+ */
+static int airo_set_auth(struct net_device *dev,
+ struct iw_request_info *info,
+ union iwreq_data *wrqu, char *extra)
+{
+ struct airo_info *local = dev->priv;
+ struct iw_param *param = &wrqu->param;
+ u16 currentAuthType = local->config.authType;
+
+ switch (param->flags & IW_AUTH_INDEX) {
+ case IW_AUTH_WPA_VERSION:
+ case IW_AUTH_CIPHER_PAIRWISE:
+ case IW_AUTH_CIPHER_GROUP:
+ case IW_AUTH_KEY_MGMT:
+ case IW_AUTH_RX_UNENCRYPTED_EAPOL:
+ case IW_AUTH_PRIVACY_INVOKED:
+ /*
+ * airo does not use these parameters
+ */
+ break;
+
+ case IW_AUTH_DROP_UNENCRYPTED:
+ if (param->value) {
+ /* Only change auth type if unencrypted */
+ if (currentAuthType == AUTH_OPEN)
+ local->config.authType = AUTH_ENCRYPT;
+ } else {
+ local->config.authType = AUTH_OPEN;
+ }
+
+ /* Commit the changes to flags if needed */
+ if (local->config.authType != currentAuthType)
+ set_bit (FLAG_COMMIT, &local->flags);
+ break;
+
+ case IW_AUTH_80211_AUTH_ALG: {
+ /* FIXME: What about AUTH_OPEN? This API seems to
+ * disallow setting our auth to AUTH_OPEN.
+ */
+ if (param->value & IW_AUTH_ALG_SHARED_KEY) {
+ local->config.authType = AUTH_SHAREDKEY;
+ } else if (param->value & IW_AUTH_ALG_OPEN_SYSTEM) {
+ local->config.authType = AUTH_ENCRYPT;
+ } else
+ return -EINVAL;
+ break;
+
+ /* Commit the changes to flags if needed */
+ if (local->config.authType != currentAuthType)
+ set_bit (FLAG_COMMIT, &local->flags);
+ }
+
+ case IW_AUTH_WPA_ENABLED:
+ /* Silently accept disable of WPA */
+ if (param->value > 0)
+ return -EOPNOTSUPP;
+ break;
+
+ default:
+ return -EOPNOTSUPP;
+ }
+ return -EINPROGRESS;
+}
+
+
+/*------------------------------------------------------------------*/
+/*
+ * Wireless Handler : get extended authentication parameters
+ */
+static int airo_get_auth(struct net_device *dev,
+ struct iw_request_info *info,
+ union iwreq_data *wrqu, char *extra)
+{
+ struct airo_info *local = dev->priv;
+ struct iw_param *param = &wrqu->param;
+ u16 currentAuthType = local->config.authType;
+
+ switch (param->flags & IW_AUTH_INDEX) {
+ case IW_AUTH_DROP_UNENCRYPTED:
+ switch (currentAuthType) {
+ case AUTH_SHAREDKEY:
+ case AUTH_ENCRYPT:
+ param->value = 1;
+ break;
+ default:
+ param->value = 0;
+ break;
+ }
+ break;
+
+ case IW_AUTH_80211_AUTH_ALG:
+ switch (currentAuthType) {
+ case AUTH_SHAREDKEY:
+ param->value = IW_AUTH_ALG_SHARED_KEY;
+ break;
+ case AUTH_ENCRYPT:
+ default:
+ param->value = IW_AUTH_ALG_OPEN_SYSTEM;
+ break;
+ }
+ break;
+
+ case IW_AUTH_WPA_ENABLED:
+ param->value = 0;
+ break;
+
+ default:
+ return -EOPNOTSUPP;
+ }
+ return 0;
+}
+
+
+/*------------------------------------------------------------------*/
+/*
* Wireless Handler : set Tx-Power
*/
static int airo_set_txpow(struct net_device *dev,
@@ -7050,6 +7271,15 @@
(iw_handler) airo_get_encode, /* SIOCGIWENCODE */
(iw_handler) airo_set_power, /* SIOCSIWPOWER */
(iw_handler) airo_get_power, /* SIOCGIWPOWER */
+ (iw_handler) NULL, /* -- hole -- */
+ (iw_handler) NULL, /* -- hole -- */
+ (iw_handler) NULL, /* SIOCSIWGENIE */
+ (iw_handler) NULL, /* SIOCGIWGENIE */
+ (iw_handler) airo_set_auth, /* SIOCSIWAUTH */
+ (iw_handler) airo_get_auth, /* SIOCGIWAUTH */
+ (iw_handler) airo_set_encodeext, /* SIOCSIWENCODEEXT */
+ (iw_handler) airo_get_encodeext, /* SIOCGIWENCODEEXT */
+ (iw_handler) NULL, /* SIOCSIWPMKSA */
};
/* Note : don't describe AIROIDIFC and AIROOLDIDIFC in here.
@@ -7270,13 +7500,11 @@
case AIROGSTAT: ridcode = RID_STATUS; break;
case AIROGSTATSD32: ridcode = RID_STATSDELTA; break;
case AIROGSTATSC32: ridcode = RID_STATS; break;
-#ifdef MICSUPPORT
case AIROGMICSTATS:
if (copy_to_user(comp->data, &ai->micstats,
min((int)comp->len,(int)sizeof(ai->micstats))))
return -EFAULT;
return 0;
-#endif
case AIRORRID: ridcode = comp->ridnum; break;
default:
return -EINVAL;
@@ -7308,9 +7536,7 @@
static int writerids(struct net_device *dev, aironet_ioctl *comp) {
struct airo_info *ai = dev->priv;
int ridcode;
-#ifdef MICSUPPORT
int enabled;
-#endif
Resp rsp;
static int (* writer)(struct airo_info *, u16 rid, const void *, int, int);
unsigned char *iobuf;
@@ -7367,11 +7593,9 @@
PC4500_readrid(ai,RID_STATSDELTACLEAR,iobuf,RIDSIZE, 1);
-#ifdef MICSUPPORT
enabled = ai->micstats.enabled;
memset(&ai->micstats,0,sizeof(ai->micstats));
ai->micstats.enabled = enabled;
-#endif
if (copy_to_user(comp->data, iobuf,
min((int)comp->len, (int)RIDSIZE))) {
diff --git a/drivers/net/wireless/atmel.c b/drivers/net/wireless/atmel.c
index dfc2401..87afa68 100644
--- a/drivers/net/wireless/atmel.c
+++ b/drivers/net/wireless/atmel.c
@@ -137,44 +137,6 @@
#define MAC_BOOT_COMPLETE 0x0010 // MAC boot has been completed
#define MAC_INIT_OK 0x0002 // MAC boot has been completed
-#define C80211_SUBTYPE_MGMT_ASS_REQUEST 0x00
-#define C80211_SUBTYPE_MGMT_ASS_RESPONSE 0x10
-#define C80211_SUBTYPE_MGMT_REASS_REQUEST 0x20
-#define C80211_SUBTYPE_MGMT_REASS_RESPONSE 0x30
-#define C80211_SUBTYPE_MGMT_ProbeRequest 0x40
-#define C80211_SUBTYPE_MGMT_ProbeResponse 0x50
-#define C80211_SUBTYPE_MGMT_BEACON 0x80
-#define C80211_SUBTYPE_MGMT_ATIM 0x90
-#define C80211_SUBTYPE_MGMT_DISASSOSIATION 0xA0
-#define C80211_SUBTYPE_MGMT_Authentication 0xB0
-#define C80211_SUBTYPE_MGMT_Deauthentication 0xC0
-
-#define C80211_MGMT_AAN_OPENSYSTEM 0x0000
-#define C80211_MGMT_AAN_SHAREDKEY 0x0001
-
-#define C80211_MGMT_CAPABILITY_ESS 0x0001 // see 802.11 p.58
-#define C80211_MGMT_CAPABILITY_IBSS 0x0002 // - " -
-#define C80211_MGMT_CAPABILITY_CFPollable 0x0004 // - " -
-#define C80211_MGMT_CAPABILITY_CFPollRequest 0x0008 // - " -
-#define C80211_MGMT_CAPABILITY_Privacy 0x0010 // - " -
-
-#define C80211_MGMT_SC_Success 0
-#define C80211_MGMT_SC_Unspecified 1
-#define C80211_MGMT_SC_SupportCapabilities 10
-#define C80211_MGMT_SC_ReassDenied 11
-#define C80211_MGMT_SC_AssDenied 12
-#define C80211_MGMT_SC_AuthAlgNotSupported 13
-#define C80211_MGMT_SC_AuthTransSeqNumError 14
-#define C80211_MGMT_SC_AuthRejectChallenge 15
-#define C80211_MGMT_SC_AuthRejectTimeout 16
-#define C80211_MGMT_SC_AssDeniedHandleAP 17
-#define C80211_MGMT_SC_AssDeniedBSSRate 18
-
-#define C80211_MGMT_ElementID_SSID 0
-#define C80211_MGMT_ElementID_SupportedRates 1
-#define C80211_MGMT_ElementID_ChallengeText 16
-#define C80211_MGMT_CAPABILITY_ShortPreamble 0x0020
-
#define MIB_MAX_DATA_BYTES 212
#define MIB_HEADER_SIZE 4 /* first four fields */
@@ -2835,7 +2797,7 @@
u8 channel)
{
int rejoin = 0;
- int new = capability & C80211_MGMT_CAPABILITY_ShortPreamble ?
+ int new = capability & MFIE_TYPE_POWER_CONSTRAINT ?
SHORT_PREAMBLE : LONG_PREAMBLE;
if (priv->preamble != new) {
@@ -2921,11 +2883,11 @@
memcpy(header.addr2, priv->dev->dev_addr, 6);
memcpy(header.addr3, priv->CurrentBSSID, 6);
- body.capability = cpu_to_le16(C80211_MGMT_CAPABILITY_ESS);
+ body.capability = cpu_to_le16(WLAN_CAPABILITY_ESS);
if (priv->wep_is_on)
- body.capability |= cpu_to_le16(C80211_MGMT_CAPABILITY_Privacy);
+ body.capability |= cpu_to_le16(WLAN_CAPABILITY_PRIVACY);
if (priv->preamble == SHORT_PREAMBLE)
- body.capability |= cpu_to_le16(C80211_MGMT_CAPABILITY_ShortPreamble);
+ body.capability |= cpu_to_le16(MFIE_TYPE_POWER_CONSTRAINT);
body.listen_interval = cpu_to_le16(priv->listen_interval * priv->beacon_period);
@@ -2939,10 +2901,10 @@
bodysize = 12 + priv->SSID_size;
}
- ssid_el_p[0] = C80211_MGMT_ElementID_SSID;
+ ssid_el_p[0] = MFIE_TYPE_SSID;
ssid_el_p[1] = priv->SSID_size;
memcpy(ssid_el_p + 2, priv->SSID, priv->SSID_size);
- ssid_el_p[2 + priv->SSID_size] = C80211_MGMT_ElementID_SupportedRates;
+ ssid_el_p[2 + priv->SSID_size] = MFIE_TYPE_RATES;
ssid_el_p[3 + priv->SSID_size] = 4; /* len of suported rates */
memcpy(ssid_el_p + 4 + priv->SSID_size, atmel_basic_rates, 4);
@@ -3004,7 +2966,7 @@
u16 beacon_period, u8 channel, u8 rssi, u8 ssid_len,
u8 *ssid, int is_beacon)
{
- u8 *bss = capability & C80211_MGMT_CAPABILITY_ESS ? header->addr2 : header->addr3;
+ u8 *bss = capability & WLAN_CAPABILITY_ESS ? header->addr2 : header->addr3;
int i, index;
for (index = -1, i = 0; i < priv->BSS_list_entries; i++)
@@ -3030,16 +2992,16 @@
priv->BSSinfo[index].channel = channel;
priv->BSSinfo[index].beacon_period = beacon_period;
- priv->BSSinfo[index].UsingWEP = capability & C80211_MGMT_CAPABILITY_Privacy;
+ priv->BSSinfo[index].UsingWEP = capability & WLAN_CAPABILITY_PRIVACY;
memcpy(priv->BSSinfo[index].SSID, ssid, ssid_len);
priv->BSSinfo[index].SSIDsize = ssid_len;
- if (capability & C80211_MGMT_CAPABILITY_IBSS)
+ if (capability & WLAN_CAPABILITY_IBSS)
priv->BSSinfo[index].BSStype = IW_MODE_ADHOC;
- else if (capability & C80211_MGMT_CAPABILITY_ESS)
+ else if (capability & WLAN_CAPABILITY_ESS)
priv->BSSinfo[index].BSStype =IW_MODE_INFRA;
- priv->BSSinfo[index].preamble = capability & C80211_MGMT_CAPABILITY_ShortPreamble ?
+ priv->BSSinfo[index].preamble = capability & MFIE_TYPE_POWER_CONSTRAINT ?
SHORT_PREAMBLE : LONG_PREAMBLE;
}
@@ -3050,7 +3012,7 @@
u16 trans_seq_no = le16_to_cpu(auth->trans_seq);
u16 system = le16_to_cpu(auth->alg);
- if (status == C80211_MGMT_SC_Success && !priv->wep_is_on) {
+ if (status == WLAN_STATUS_SUCCESS && !priv->wep_is_on) {
/* no WEP */
if (priv->station_was_associated) {
atmel_enter_state(priv, STATION_STATE_REASSOCIATING);
@@ -3063,19 +3025,19 @@
}
}
- if (status == C80211_MGMT_SC_Success && priv->wep_is_on) {
+ if (status == WLAN_STATUS_SUCCESS && priv->wep_is_on) {
int should_associate = 0;
/* WEP */
if (trans_seq_no != priv->ExpectedAuthentTransactionSeqNum)
return;
- if (system == C80211_MGMT_AAN_OPENSYSTEM) {
+ if (system == WLAN_AUTH_OPEN) {
if (trans_seq_no == 0x0002) {
should_associate = 1;
}
- } else if (system == C80211_MGMT_AAN_SHAREDKEY) {
+ } else if (system == WLAN_AUTH_SHARED_KEY) {
if (trans_seq_no == 0x0002 &&
- auth->el_id == C80211_MGMT_ElementID_ChallengeText) {
+ auth->el_id == MFIE_TYPE_CHALLENGE) {
send_authentication_request(priv, system, auth->chall_text, auth->chall_text_len);
return;
} else if (trans_seq_no == 0x0004) {
@@ -3140,8 +3102,8 @@
if (frame_len < 8 + rates_len)
return;
- if (status == C80211_MGMT_SC_Success) {
- if (subtype == C80211_SUBTYPE_MGMT_ASS_RESPONSE)
+ if (status == WLAN_STATUS_SUCCESS) {
+ if (subtype == IEEE80211_STYPE_ASSOC_RESP)
priv->AssociationRequestRetryCnt = 0;
else
priv->ReAssociationRequestRetryCnt = 0;
@@ -3178,9 +3140,9 @@
return;
}
- if (subtype == C80211_SUBTYPE_MGMT_ASS_RESPONSE &&
- status != C80211_MGMT_SC_AssDeniedBSSRate &&
- status != C80211_MGMT_SC_SupportCapabilities &&
+ if (subtype == IEEE80211_STYPE_ASSOC_RESP &&
+ status != WLAN_STATUS_ASSOC_DENIED_RATES &&
+ status != WLAN_STATUS_CAPS_UNSUPPORTED &&
priv->AssociationRequestRetryCnt < MAX_ASSOCIATION_RETRIES) {
mod_timer(&priv->management_timer, jiffies + MGMT_JIFFIES);
priv->AssociationRequestRetryCnt++;
@@ -3188,9 +3150,9 @@
return;
}
- if (subtype == C80211_SUBTYPE_MGMT_REASS_RESPONSE &&
- status != C80211_MGMT_SC_AssDeniedBSSRate &&
- status != C80211_MGMT_SC_SupportCapabilities &&
+ if (subtype == IEEE80211_STYPE_REASSOC_RESP &&
+ status != WLAN_STATUS_ASSOC_DENIED_RATES &&
+ status != WLAN_STATUS_CAPS_UNSUPPORTED &&
priv->AssociationRequestRetryCnt < MAX_ASSOCIATION_RETRIES) {
mod_timer(&priv->management_timer, jiffies + MGMT_JIFFIES);
priv->ReAssociationRequestRetryCnt++;
@@ -3325,8 +3287,8 @@
subtype = le16_to_cpu(header->frame_ctl) & IEEE80211_FCTL_STYPE;
switch (subtype) {
- case C80211_SUBTYPE_MGMT_BEACON:
- case C80211_SUBTYPE_MGMT_ProbeResponse:
+ case IEEE80211_STYPE_BEACON:
+ case IEEE80211_STYPE_PROBE_RESP:
/* beacon frame has multiple variable-length fields -
never let an engineer loose with a data structure design. */
@@ -3384,19 +3346,19 @@
beacon_interval, channel, rssi,
ssid_length,
&beacon->rates_el_id,
- subtype == C80211_SUBTYPE_MGMT_BEACON);
+ subtype == IEEE80211_STYPE_BEACON);
}
break;
- case C80211_SUBTYPE_MGMT_Authentication:
+ case IEEE80211_STYPE_AUTH:
if (priv->station_state == STATION_STATE_AUTHENTICATING)
authenticate(priv, frame_len);
break;
- case C80211_SUBTYPE_MGMT_ASS_RESPONSE:
- case C80211_SUBTYPE_MGMT_REASS_RESPONSE:
+ case IEEE80211_STYPE_ASSOC_RESP:
+ case IEEE80211_STYPE_REASSOC_RESP:
if (priv->station_state == STATION_STATE_ASSOCIATING ||
priv->station_state == STATION_STATE_REASSOCIATING)
@@ -3404,7 +3366,7 @@
break;
- case C80211_SUBTYPE_MGMT_DISASSOSIATION:
+ case IEEE80211_STYPE_DISASSOC:
if (priv->station_is_associated &&
priv->operating_mode == IW_MODE_INFRA &&
is_frame_from_current_bss(priv, header)) {
@@ -3417,7 +3379,7 @@
break;
- case C80211_SUBTYPE_MGMT_Deauthentication:
+ case IEEE80211_STYPE_DEAUTH:
if (priv->operating_mode == IW_MODE_INFRA &&
is_frame_from_current_bss(priv, header)) {
priv->station_was_associated = 0;
@@ -3453,12 +3415,12 @@
priv->AuthenticationRequestRetryCnt = 0;
restart_search(priv);
} else {
- int auth = C80211_MGMT_AAN_OPENSYSTEM;
+ int auth = WLAN_AUTH_OPEN;
priv->AuthenticationRequestRetryCnt++;
priv->CurrentAuthentTransactionSeqNum = 0x0001;
mod_timer(&priv->management_timer, jiffies + MGMT_JIFFIES);
if (priv->wep_is_on && priv->exclude_unencrypted)
- auth = C80211_MGMT_AAN_SHAREDKEY;
+ auth = WLAN_AUTH_SHARED_KEY;
send_authentication_request(priv, auth, NULL, 0);
}
break;
@@ -3558,14 +3520,14 @@
priv->station_was_associated = priv->station_is_associated;
atmel_enter_state(priv, STATION_STATE_READY);
} else {
- int auth = C80211_MGMT_AAN_OPENSYSTEM;
+ int auth = WLAN_AUTH_OPEN;
priv->AuthenticationRequestRetryCnt = 0;
atmel_enter_state(priv, STATION_STATE_AUTHENTICATING);
mod_timer(&priv->management_timer, jiffies + MGMT_JIFFIES);
priv->CurrentAuthentTransactionSeqNum = 0x0001;
if (priv->wep_is_on && priv->exclude_unencrypted)
- auth = C80211_MGMT_AAN_SHAREDKEY;
+ auth = WLAN_AUTH_SHARED_KEY;
send_authentication_request(priv, auth, NULL, 0);
}
return;
diff --git a/drivers/net/wireless/ipw2100.c b/drivers/net/wireless/ipw2100.c
index 6290c9f..eb79198 100644
--- a/drivers/net/wireless/ipw2100.c
+++ b/drivers/net/wireless/ipw2100.c
@@ -167,7 +167,7 @@
#include "ipw2100.h"
-#define IPW2100_VERSION "1.1.3"
+#define IPW2100_VERSION "git-1.1.4"
#define DRV_NAME "ipw2100"
#define DRV_VERSION IPW2100_VERSION
@@ -1672,6 +1672,18 @@
return err;
}
+static const struct ieee80211_geo ipw_geos[] = {
+ { /* Restricted */
+ "---",
+ .bg_channels = 14,
+ .bg = {{2412, 1}, {2417, 2}, {2422, 3},
+ {2427, 4}, {2432, 5}, {2437, 6},
+ {2442, 7}, {2447, 8}, {2452, 9},
+ {2457, 10}, {2462, 11}, {2467, 12},
+ {2472, 13}, {2484, 14}},
+ },
+};
+
static int ipw2100_up(struct ipw2100_priv *priv, int deferred)
{
unsigned long flags;
@@ -1727,6 +1739,13 @@
goto exit;
}
+ /* Initialize the geo */
+ if (ieee80211_set_geo(priv->ieee, &ipw_geos[0])) {
+ printk(KERN_WARNING DRV_NAME "Could not set geo\n");
+ return 0;
+ }
+ priv->ieee->freq_band = IEEE80211_24GHZ_BAND;
+
lock = LOCK_NONE;
if (ipw2100_set_ordinal(priv, IPW_ORD_PERS_DB_LOCK, &lock, &ord_len)) {
printk(KERN_ERR DRV_NAME
@@ -3750,7 +3769,7 @@
struct net_device *dev = priv->net_dev;
const char *p = buf;
- (void) dev; /* kill unused-var warning for debug-only code */
+ (void)dev; /* kill unused-var warning for debug-only code */
if (count < 1)
return count;
@@ -4070,7 +4089,7 @@
unsigned long val;
char *p = buffer;
- (void) dev; /* kill unused-var warning for debug-only code */
+ (void)dev; /* kill unused-var warning for debug-only code */
IPW_DEBUG_INFO("enter\n");
@@ -5107,12 +5126,13 @@
.host_command_length = 4
};
int err = 0;
+ u32 tmp = tx_power;
if (tx_power != IPW_TX_POWER_DEFAULT)
- tx_power = (tx_power - IPW_TX_POWER_MIN_DBM) * 16 /
- (IPW_TX_POWER_MAX_DBM - IPW_TX_POWER_MIN_DBM);
+ tmp = (tx_power - IPW_TX_POWER_MIN_DBM) * 16 /
+ (IPW_TX_POWER_MAX_DBM - IPW_TX_POWER_MIN_DBM);
- cmd.host_command_parameters[0] = tx_power;
+ cmd.host_command_parameters[0] = tmp;
if (priv->ieee->iw_mode == IW_MODE_ADHOC)
err = ipw2100_hw_send_command(priv, &cmd);
@@ -5365,9 +5385,12 @@
SEC_LEVEL_0, 0, 1);
} else {
auth_mode = IPW_AUTH_OPEN;
- if ((priv->ieee->sec.flags & SEC_AUTH_MODE) &&
- (priv->ieee->sec.auth_mode == WLAN_AUTH_SHARED_KEY))
- auth_mode = IPW_AUTH_SHARED;
+ if (priv->ieee->sec.flags & SEC_AUTH_MODE) {
+ if (priv->ieee->sec.auth_mode == WLAN_AUTH_SHARED_KEY)
+ auth_mode = IPW_AUTH_SHARED;
+ else if (priv->ieee->sec.auth_mode == WLAN_AUTH_LEAP)
+ auth_mode = IPW_AUTH_LEAP_CISCO_ID;
+ }
sec_level = SEC_LEVEL_0;
if (priv->ieee->sec.flags & SEC_LEVEL)
@@ -5760,6 +5783,9 @@
} else if (value & IW_AUTH_ALG_OPEN_SYSTEM) {
sec.auth_mode = WLAN_AUTH_OPEN;
ieee->open_wep = 1;
+ } else if (value & IW_AUTH_ALG_LEAP) {
+ sec.auth_mode = WLAN_AUTH_LEAP;
+ ieee->open_wep = 1;
} else
return -EINVAL;
@@ -5771,8 +5797,8 @@
return ret;
}
-void ipw2100_wpa_assoc_frame(struct ipw2100_priv *priv,
- char *wpa_ie, int wpa_ie_len)
+static void ipw2100_wpa_assoc_frame(struct ipw2100_priv *priv,
+ char *wpa_ie, int wpa_ie_len)
{
struct ipw2100_wpa_assoc_frame frame;
diff --git a/drivers/net/wireless/ipw2100.h b/drivers/net/wireless/ipw2100.h
index f6c5144..5136091 100644
--- a/drivers/net/wireless/ipw2100.h
+++ b/drivers/net/wireless/ipw2100.h
@@ -392,8 +392,10 @@
#define IPW_WEP104_CIPHER (1<<5)
#define IPW_CKIP_CIPHER (1<<6)
-#define IPW_AUTH_OPEN 0
-#define IPW_AUTH_SHARED 1
+#define IPW_AUTH_OPEN 0
+#define IPW_AUTH_SHARED 1
+#define IPW_AUTH_LEAP 2
+#define IPW_AUTH_LEAP_CISCO_ID 0x80
struct statistic {
int value;
diff --git a/drivers/net/wireless/ipw2200.c b/drivers/net/wireless/ipw2200.c
index 287676a..ed37141 100644
--- a/drivers/net/wireless/ipw2200.c
+++ b/drivers/net/wireless/ipw2200.c
@@ -33,7 +33,7 @@
#include "ipw2200.h"
#include <linux/version.h>
-#define IPW2200_VERSION "git-1.0.8"
+#define IPW2200_VERSION "git-1.0.10"
#define DRV_DESCRIPTION "Intel(R) PRO/Wireless 2200/2915 Network Driver"
#define DRV_COPYRIGHT "Copyright(c) 2003-2005 Intel Corporation"
#define DRV_VERSION IPW2200_VERSION
@@ -55,7 +55,9 @@
static int auto_create = 1;
static int led = 0;
static int disable = 0;
-static int hwcrypto = 1;
+static int bt_coexist = 0;
+static int hwcrypto = 0;
+static int roaming = 1;
static const char ipw_modes[] = {
'a', 'b', 'g', '?'
};
@@ -227,12 +229,15 @@
return total;
}
+/* alias for 32-bit indirect read (for SRAM/reg above 4K), with debug wrapper */
static u32 _ipw_read_reg32(struct ipw_priv *priv, u32 reg);
#define ipw_read_reg32(a, b) _ipw_read_reg32(a, b)
+/* alias for 8-bit indirect read (for SRAM/reg above 4K), with debug wrapper */
static u8 _ipw_read_reg8(struct ipw_priv *ipw, u32 reg);
#define ipw_read_reg8(a, b) _ipw_read_reg8(a, b)
+/* 8-bit indirect write (for SRAM/reg above 4K), with debug wrapper */
static void _ipw_write_reg8(struct ipw_priv *priv, u32 reg, u8 value);
static inline void ipw_write_reg8(struct ipw_priv *a, u32 b, u8 c)
{
@@ -241,6 +246,7 @@
_ipw_write_reg8(a, b, c);
}
+/* 16-bit indirect write (for SRAM/reg above 4K), with debug wrapper */
static void _ipw_write_reg16(struct ipw_priv *priv, u32 reg, u16 value);
static inline void ipw_write_reg16(struct ipw_priv *a, u32 b, u16 c)
{
@@ -249,6 +255,7 @@
_ipw_write_reg16(a, b, c);
}
+/* 32-bit indirect write (for SRAM/reg above 4K), with debug wrapper */
static void _ipw_write_reg32(struct ipw_priv *priv, u32 reg, u32 value);
static inline void ipw_write_reg32(struct ipw_priv *a, u32 b, u32 c)
{
@@ -257,48 +264,70 @@
_ipw_write_reg32(a, b, c);
}
+/* 8-bit direct write (low 4K) */
#define _ipw_write8(ipw, ofs, val) writeb((val), (ipw)->hw_base + (ofs))
+
+/* 8-bit direct write (for low 4K of SRAM/regs), with debug wrapper */
#define ipw_write8(ipw, ofs, val) \
IPW_DEBUG_IO("%s %d: write_direct8(0x%08X, 0x%08X)\n", __FILE__, __LINE__, (u32)(ofs), (u32)(val)); \
_ipw_write8(ipw, ofs, val)
+/* 16-bit direct write (low 4K) */
#define _ipw_write16(ipw, ofs, val) writew((val), (ipw)->hw_base + (ofs))
+
+/* 16-bit direct write (for low 4K of SRAM/regs), with debug wrapper */
#define ipw_write16(ipw, ofs, val) \
IPW_DEBUG_IO("%s %d: write_direct16(0x%08X, 0x%08X)\n", __FILE__, __LINE__, (u32)(ofs), (u32)(val)); \
_ipw_write16(ipw, ofs, val)
+/* 32-bit direct write (low 4K) */
#define _ipw_write32(ipw, ofs, val) writel((val), (ipw)->hw_base + (ofs))
+
+/* 32-bit direct write (for low 4K of SRAM/regs), with debug wrapper */
#define ipw_write32(ipw, ofs, val) \
IPW_DEBUG_IO("%s %d: write_direct32(0x%08X, 0x%08X)\n", __FILE__, __LINE__, (u32)(ofs), (u32)(val)); \
_ipw_write32(ipw, ofs, val)
+/* 8-bit direct read (low 4K) */
#define _ipw_read8(ipw, ofs) readb((ipw)->hw_base + (ofs))
+
+/* 8-bit direct read (low 4K), with debug wrapper */
static inline u8 __ipw_read8(char *f, u32 l, struct ipw_priv *ipw, u32 ofs)
{
IPW_DEBUG_IO("%s %d: read_direct8(0x%08X)\n", f, l, (u32) (ofs));
return _ipw_read8(ipw, ofs);
}
+/* alias to 8-bit direct read (low 4K of SRAM/regs), with debug wrapper */
#define ipw_read8(ipw, ofs) __ipw_read8(__FILE__, __LINE__, ipw, ofs)
+/* 16-bit direct read (low 4K) */
#define _ipw_read16(ipw, ofs) readw((ipw)->hw_base + (ofs))
+
+/* 16-bit direct read (low 4K), with debug wrapper */
static inline u16 __ipw_read16(char *f, u32 l, struct ipw_priv *ipw, u32 ofs)
{
IPW_DEBUG_IO("%s %d: read_direct16(0x%08X)\n", f, l, (u32) (ofs));
return _ipw_read16(ipw, ofs);
}
+/* alias to 16-bit direct read (low 4K of SRAM/regs), with debug wrapper */
#define ipw_read16(ipw, ofs) __ipw_read16(__FILE__, __LINE__, ipw, ofs)
+/* 32-bit direct read (low 4K) */
#define _ipw_read32(ipw, ofs) readl((ipw)->hw_base + (ofs))
+
+/* 32-bit direct read (low 4K), with debug wrapper */
static inline u32 __ipw_read32(char *f, u32 l, struct ipw_priv *ipw, u32 ofs)
{
IPW_DEBUG_IO("%s %d: read_direct32(0x%08X)\n", f, l, (u32) (ofs));
return _ipw_read32(ipw, ofs);
}
+/* alias to 32-bit direct read (low 4K of SRAM/regs), with debug wrapper */
#define ipw_read32(ipw, ofs) __ipw_read32(__FILE__, __LINE__, ipw, ofs)
+/* multi-byte read (above 4K), with debug wrapper */
static void _ipw_read_indirect(struct ipw_priv *, u32, u8 *, int);
static inline void __ipw_read_indirect(const char *f, int l,
struct ipw_priv *a, u32 b, u8 * c, int d)
@@ -308,15 +337,17 @@
_ipw_read_indirect(a, b, c, d);
}
+/* alias to multi-byte read (SRAM/regs above 4K), with debug wrapper */
#define ipw_read_indirect(a, b, c, d) __ipw_read_indirect(__FILE__, __LINE__, a, b, c, d)
+/* alias to multi-byte read (SRAM/regs above 4K), with debug wrapper */
static void _ipw_write_indirect(struct ipw_priv *priv, u32 addr, u8 * data,
int num);
#define ipw_write_indirect(a, b, c, d) \
IPW_DEBUG_IO("%s %d: write_indirect(0x%08X) %d bytes\n", __FILE__, __LINE__, (u32)(b), d); \
_ipw_write_indirect(a, b, c, d)
-/* indirect write s */
+/* 32-bit indirect write (above 4K) */
static void _ipw_write_reg32(struct ipw_priv *priv, u32 reg, u32 value)
{
IPW_DEBUG_IO(" %p : reg = 0x%8X : value = 0x%8X\n", priv, reg, value);
@@ -324,22 +355,29 @@
_ipw_write32(priv, IPW_INDIRECT_DATA, value);
}
+/* 8-bit indirect write (above 4K) */
static void _ipw_write_reg8(struct ipw_priv *priv, u32 reg, u8 value)
{
+ u32 aligned_addr = reg & IPW_INDIRECT_ADDR_MASK; /* dword align */
+ u32 dif_len = reg - aligned_addr;
+
IPW_DEBUG_IO(" reg = 0x%8X : value = 0x%8X\n", reg, value);
- _ipw_write32(priv, IPW_INDIRECT_ADDR, reg & IPW_INDIRECT_ADDR_MASK);
- _ipw_write8(priv, IPW_INDIRECT_DATA, value);
+ _ipw_write32(priv, IPW_INDIRECT_ADDR, aligned_addr);
+ _ipw_write8(priv, IPW_INDIRECT_DATA + dif_len, value);
}
+/* 16-bit indirect write (above 4K) */
static void _ipw_write_reg16(struct ipw_priv *priv, u32 reg, u16 value)
{
+ u32 aligned_addr = reg & IPW_INDIRECT_ADDR_MASK; /* dword align */
+ u32 dif_len = (reg - aligned_addr) & (~0x1ul);
+
IPW_DEBUG_IO(" reg = 0x%8X : value = 0x%8X\n", reg, value);
- _ipw_write32(priv, IPW_INDIRECT_ADDR, reg & IPW_INDIRECT_ADDR_MASK);
- _ipw_write16(priv, IPW_INDIRECT_DATA, value);
+ _ipw_write32(priv, IPW_INDIRECT_ADDR, aligned_addr);
+ _ipw_write16(priv, IPW_INDIRECT_DATA + dif_len, value);
}
-/* indirect read s */
-
+/* 8-bit indirect read (above 4K) */
static u8 _ipw_read_reg8(struct ipw_priv *priv, u32 reg)
{
u32 word;
@@ -349,6 +387,7 @@
return (word >> ((reg & 0x3) * 8)) & 0xff;
}
+/* 32-bit indirect read (above 4K) */
static u32 _ipw_read_reg32(struct ipw_priv *priv, u32 reg)
{
u32 value;
@@ -361,11 +400,12 @@
return value;
}
-/* iterative/auto-increment 32 bit reads and writes */
+/* General purpose, no alignment requirement, iterative (multi-byte) read, */
+/* for area above 1st 4K of SRAM/reg space */
static void _ipw_read_indirect(struct ipw_priv *priv, u32 addr, u8 * buf,
int num)
{
- u32 aligned_addr = addr & IPW_INDIRECT_ADDR_MASK;
+ u32 aligned_addr = addr & IPW_INDIRECT_ADDR_MASK; /* dword align */
u32 dif_len = addr - aligned_addr;
u32 i;
@@ -375,7 +415,7 @@
return;
}
- /* Read the first nibble byte by byte */
+ /* Read the first dword (or portion) byte by byte */
if (unlikely(dif_len)) {
_ipw_write32(priv, IPW_INDIRECT_ADDR, aligned_addr);
/* Start reading at aligned_addr + dif_len */
@@ -384,11 +424,12 @@
aligned_addr += 4;
}
+ /* Read all of the middle dwords as dwords, with auto-increment */
_ipw_write32(priv, IPW_AUTOINC_ADDR, aligned_addr);
for (; num >= 4; buf += 4, aligned_addr += 4, num -= 4)
*(u32 *) buf = _ipw_read32(priv, IPW_AUTOINC_DATA);
- /* Copy the last nibble */
+ /* Read the last dword (or portion) byte by byte */
if (unlikely(num)) {
_ipw_write32(priv, IPW_INDIRECT_ADDR, aligned_addr);
for (i = 0; num > 0; i++, num--)
@@ -396,10 +437,12 @@
}
}
+/* General purpose, no alignment requirement, iterative (multi-byte) write, */
+/* for area above 1st 4K of SRAM/reg space */
static void _ipw_write_indirect(struct ipw_priv *priv, u32 addr, u8 * buf,
int num)
{
- u32 aligned_addr = addr & IPW_INDIRECT_ADDR_MASK;
+ u32 aligned_addr = addr & IPW_INDIRECT_ADDR_MASK; /* dword align */
u32 dif_len = addr - aligned_addr;
u32 i;
@@ -409,20 +452,21 @@
return;
}
- /* Write the first nibble byte by byte */
+ /* Write the first dword (or portion) byte by byte */
if (unlikely(dif_len)) {
_ipw_write32(priv, IPW_INDIRECT_ADDR, aligned_addr);
- /* Start reading at aligned_addr + dif_len */
+ /* Start writing at aligned_addr + dif_len */
for (i = dif_len; ((i < 4) && (num > 0)); i++, num--, buf++)
_ipw_write8(priv, IPW_INDIRECT_DATA + i, *buf);
aligned_addr += 4;
}
+ /* Write all of the middle dwords as dwords, with auto-increment */
_ipw_write32(priv, IPW_AUTOINC_ADDR, aligned_addr);
for (; num >= 4; buf += 4, aligned_addr += 4, num -= 4)
_ipw_write32(priv, IPW_AUTOINC_DATA, *(u32 *) buf);
- /* Copy the last nibble */
+ /* Write the last dword (or portion) byte by byte */
if (unlikely(num)) {
_ipw_write32(priv, IPW_INDIRECT_ADDR, aligned_addr);
for (i = 0; num > 0; i++, num--, buf++)
@@ -430,17 +474,21 @@
}
}
+/* General purpose, no alignment requirement, iterative (multi-byte) write, */
+/* for 1st 4K of SRAM/regs space */
static void ipw_write_direct(struct ipw_priv *priv, u32 addr, void *buf,
int num)
{
memcpy_toio((priv->hw_base + addr), buf, num);
}
+/* Set bit(s) in low 4K of SRAM/regs */
static inline void ipw_set_bit(struct ipw_priv *priv, u32 reg, u32 mask)
{
ipw_write32(priv, reg, ipw_read32(priv, reg) | mask);
}
+/* Clear bit(s) in low 4K of SRAM/regs */
static inline void ipw_clear_bit(struct ipw_priv *priv, u32 reg, u32 mask)
{
ipw_write32(priv, reg, ipw_read32(priv, reg) & ~mask);
@@ -701,7 +749,7 @@
}
-u32 ipw_register_toggle(u32 reg)
+static u32 ipw_register_toggle(u32 reg)
{
reg &= ~IPW_START_STANDBY;
if (reg & IPW_GATE_ODMA)
@@ -722,11 +770,11 @@
* - On radio OFF, turn off any LEDs started during radio on
*
*/
-#define LD_TIME_LINK_ON 300
-#define LD_TIME_LINK_OFF 2700
-#define LD_TIME_ACT_ON 250
+#define LD_TIME_LINK_ON msecs_to_jiffies(300)
+#define LD_TIME_LINK_OFF msecs_to_jiffies(2700)
+#define LD_TIME_ACT_ON msecs_to_jiffies(250)
-void ipw_led_link_on(struct ipw_priv *priv)
+static void ipw_led_link_on(struct ipw_priv *priv)
{
unsigned long flags;
u32 led;
@@ -764,12 +812,12 @@
static void ipw_bg_led_link_on(void *data)
{
struct ipw_priv *priv = data;
- down(&priv->sem);
+ mutex_lock(&priv->mutex);
ipw_led_link_on(data);
- up(&priv->sem);
+ mutex_unlock(&priv->mutex);
}
-void ipw_led_link_off(struct ipw_priv *priv)
+static void ipw_led_link_off(struct ipw_priv *priv)
{
unsigned long flags;
u32 led;
@@ -808,9 +856,9 @@
static void ipw_bg_led_link_off(void *data)
{
struct ipw_priv *priv = data;
- down(&priv->sem);
+ mutex_lock(&priv->mutex);
ipw_led_link_off(data);
- up(&priv->sem);
+ mutex_unlock(&priv->mutex);
}
static void __ipw_led_activity_on(struct ipw_priv *priv)
@@ -847,6 +895,7 @@
}
}
+#if 0
void ipw_led_activity_on(struct ipw_priv *priv)
{
unsigned long flags;
@@ -854,8 +903,9 @@
__ipw_led_activity_on(priv);
spin_unlock_irqrestore(&priv->lock, flags);
}
+#endif /* 0 */
-void ipw_led_activity_off(struct ipw_priv *priv)
+static void ipw_led_activity_off(struct ipw_priv *priv)
{
unsigned long flags;
u32 led;
@@ -885,12 +935,12 @@
static void ipw_bg_led_activity_off(void *data)
{
struct ipw_priv *priv = data;
- down(&priv->sem);
+ mutex_lock(&priv->mutex);
ipw_led_activity_off(data);
- up(&priv->sem);
+ mutex_unlock(&priv->mutex);
}
-void ipw_led_band_on(struct ipw_priv *priv)
+static void ipw_led_band_on(struct ipw_priv *priv)
{
unsigned long flags;
u32 led;
@@ -925,7 +975,7 @@
spin_unlock_irqrestore(&priv->lock, flags);
}
-void ipw_led_band_off(struct ipw_priv *priv)
+static void ipw_led_band_off(struct ipw_priv *priv)
{
unsigned long flags;
u32 led;
@@ -948,24 +998,24 @@
spin_unlock_irqrestore(&priv->lock, flags);
}
-void ipw_led_radio_on(struct ipw_priv *priv)
+static void ipw_led_radio_on(struct ipw_priv *priv)
{
ipw_led_link_on(priv);
}
-void ipw_led_radio_off(struct ipw_priv *priv)
+static void ipw_led_radio_off(struct ipw_priv *priv)
{
ipw_led_activity_off(priv);
ipw_led_link_off(priv);
}
-void ipw_led_link_up(struct ipw_priv *priv)
+static void ipw_led_link_up(struct ipw_priv *priv)
{
/* Set the Link Led on for all nic types */
ipw_led_link_on(priv);
}
-void ipw_led_link_down(struct ipw_priv *priv)
+static void ipw_led_link_down(struct ipw_priv *priv)
{
ipw_led_activity_off(priv);
ipw_led_link_off(priv);
@@ -974,7 +1024,7 @@
ipw_led_radio_off(priv);
}
-void ipw_led_init(struct ipw_priv *priv)
+static void ipw_led_init(struct ipw_priv *priv)
{
priv->nic_type = priv->eeprom[EEPROM_NIC_TYPE];
@@ -1025,7 +1075,7 @@
}
}
-void ipw_led_shutdown(struct ipw_priv *priv)
+static void ipw_led_shutdown(struct ipw_priv *priv)
{
ipw_led_activity_off(priv);
ipw_led_link_off(priv);
@@ -1074,6 +1124,7 @@
static inline u32 ipw_get_event_log_len(struct ipw_priv *priv)
{
+ /* length = 1st dword in log */
return ipw_read_reg32(priv, ipw_read32(priv, IPW_EVENT_LOG));
}
@@ -1870,7 +1921,8 @@
}
#define HOST_COMPLETE_TIMEOUT HZ
-static int ipw_send_cmd(struct ipw_priv *priv, struct host_cmd *cmd)
+
+static int __ipw_send_cmd(struct ipw_priv *priv, struct host_cmd *cmd)
{
int rc = 0;
unsigned long flags;
@@ -1897,9 +1949,15 @@
IPW_DEBUG_HC("%s command (#%d) %d bytes: 0x%08X\n",
get_cmd_string(cmd->cmd), cmd->cmd, cmd->len,
priv->status);
- printk_buf(IPW_DL_HOST_COMMAND, (u8 *) cmd->param, cmd->len);
- rc = ipw_queue_tx_hcmd(priv, cmd->cmd, &cmd->param, cmd->len, 0);
+#ifndef DEBUG_CMD_WEP_KEY
+ if (cmd->cmd == IPW_CMD_WEP_KEY)
+ IPW_DEBUG_HC("WEP_KEY command masked out for secure.\n");
+ else
+#endif
+ printk_buf(IPW_DL_HOST_COMMAND, (u8 *) cmd->param, cmd->len);
+
+ rc = ipw_queue_tx_hcmd(priv, cmd->cmd, cmd->param, cmd->len, 0);
if (rc) {
priv->status &= ~STATUS_HCMD_ACTIVE;
IPW_ERROR("Failed to send %s: Reason %d\n",
@@ -1942,61 +2000,62 @@
return rc;
}
-static int ipw_send_host_complete(struct ipw_priv *priv)
+static int ipw_send_cmd_simple(struct ipw_priv *priv, u8 command)
{
struct host_cmd cmd = {
- .cmd = IPW_CMD_HOST_COMPLETE,
- .len = 0
+ .cmd = command,
};
+ return __ipw_send_cmd(priv, &cmd);
+}
+
+static int ipw_send_cmd_pdu(struct ipw_priv *priv, u8 command, u8 len,
+ void *data)
+{
+ struct host_cmd cmd = {
+ .cmd = command,
+ .len = len,
+ .param = data,
+ };
+
+ return __ipw_send_cmd(priv, &cmd);
+}
+
+static int ipw_send_host_complete(struct ipw_priv *priv)
+{
if (!priv) {
IPW_ERROR("Invalid args\n");
return -1;
}
- return ipw_send_cmd(priv, &cmd);
+ return ipw_send_cmd_simple(priv, IPW_CMD_HOST_COMPLETE);
}
static int ipw_send_system_config(struct ipw_priv *priv,
struct ipw_sys_config *config)
{
- struct host_cmd cmd = {
- .cmd = IPW_CMD_SYSTEM_CONFIG,
- .len = sizeof(*config)
- };
-
if (!priv || !config) {
IPW_ERROR("Invalid args\n");
return -1;
}
- memcpy(cmd.param, config, sizeof(*config));
- return ipw_send_cmd(priv, &cmd);
+ return ipw_send_cmd_pdu(priv, IPW_CMD_SYSTEM_CONFIG, sizeof(*config),
+ config);
}
static int ipw_send_ssid(struct ipw_priv *priv, u8 * ssid, int len)
{
- struct host_cmd cmd = {
- .cmd = IPW_CMD_SSID,
- .len = min(len, IW_ESSID_MAX_SIZE)
- };
-
if (!priv || !ssid) {
IPW_ERROR("Invalid args\n");
return -1;
}
- memcpy(cmd.param, ssid, cmd.len);
- return ipw_send_cmd(priv, &cmd);
+ return ipw_send_cmd_pdu(priv, IPW_CMD_SSID, min(len, IW_ESSID_MAX_SIZE),
+ ssid);
}
static int ipw_send_adapter_address(struct ipw_priv *priv, u8 * mac)
{
- struct host_cmd cmd = {
- .cmd = IPW_CMD_ADAPTER_ADDRESS,
- .len = ETH_ALEN
- };
-
if (!priv || !mac) {
IPW_ERROR("Invalid args\n");
return -1;
@@ -2005,8 +2064,7 @@
IPW_DEBUG_INFO("%s: Setting MAC to " MAC_FMT "\n",
priv->net_dev->name, MAC_ARG(mac));
- memcpy(cmd.param, mac, ETH_ALEN);
- return ipw_send_cmd(priv, &cmd);
+ return ipw_send_cmd_pdu(priv, IPW_CMD_ADAPTER_ADDRESS, ETH_ALEN, mac);
}
/*
@@ -2036,9 +2094,9 @@
static void ipw_bg_adapter_restart(void *data)
{
struct ipw_priv *priv = data;
- down(&priv->sem);
+ mutex_lock(&priv->mutex);
ipw_adapter_restart(data);
- up(&priv->sem);
+ mutex_unlock(&priv->mutex);
}
#define IPW_SCAN_CHECK_WATCHDOG (5 * HZ)
@@ -2048,8 +2106,8 @@
struct ipw_priv *priv = data;
if (priv->status & (STATUS_SCANNING | STATUS_SCAN_ABORTING)) {
IPW_DEBUG_SCAN("Scan completion watchdog resetting "
- "adapter (%dms).\n",
- IPW_SCAN_CHECK_WATCHDOG / 100);
+ "adapter after (%dms).\n",
+ jiffies_to_msecs(IPW_SCAN_CHECK_WATCHDOG));
queue_work(priv->workqueue, &priv->adapter_restart);
}
}
@@ -2057,59 +2115,48 @@
static void ipw_bg_scan_check(void *data)
{
struct ipw_priv *priv = data;
- down(&priv->sem);
+ mutex_lock(&priv->mutex);
ipw_scan_check(data);
- up(&priv->sem);
+ mutex_unlock(&priv->mutex);
}
static int ipw_send_scan_request_ext(struct ipw_priv *priv,
struct ipw_scan_request_ext *request)
{
- struct host_cmd cmd = {
- .cmd = IPW_CMD_SCAN_REQUEST_EXT,
- .len = sizeof(*request)
- };
-
- memcpy(cmd.param, request, sizeof(*request));
- return ipw_send_cmd(priv, &cmd);
+ return ipw_send_cmd_pdu(priv, IPW_CMD_SCAN_REQUEST_EXT,
+ sizeof(*request), request);
}
static int ipw_send_scan_abort(struct ipw_priv *priv)
{
- struct host_cmd cmd = {
- .cmd = IPW_CMD_SCAN_ABORT,
- .len = 0
- };
-
if (!priv) {
IPW_ERROR("Invalid args\n");
return -1;
}
- return ipw_send_cmd(priv, &cmd);
+ return ipw_send_cmd_simple(priv, IPW_CMD_SCAN_ABORT);
}
static int ipw_set_sensitivity(struct ipw_priv *priv, u16 sens)
{
- struct host_cmd cmd = {
- .cmd = IPW_CMD_SENSITIVITY_CALIB,
- .len = sizeof(struct ipw_sensitivity_calib)
+ struct ipw_sensitivity_calib calib = {
+ .beacon_rssi_raw = sens,
};
- struct ipw_sensitivity_calib *calib = (struct ipw_sensitivity_calib *)
- &cmd.param;
- calib->beacon_rssi_raw = sens;
- return ipw_send_cmd(priv, &cmd);
+
+ return ipw_send_cmd_pdu(priv, IPW_CMD_SENSITIVITY_CALIB, sizeof(calib),
+ &calib);
}
static int ipw_send_associate(struct ipw_priv *priv,
struct ipw_associate *associate)
{
- struct host_cmd cmd = {
- .cmd = IPW_CMD_ASSOCIATE,
- .len = sizeof(*associate)
- };
-
struct ipw_associate tmp_associate;
+
+ if (!priv || !associate) {
+ IPW_ERROR("Invalid args\n");
+ return -1;
+ }
+
memcpy(&tmp_associate, associate, sizeof(*associate));
tmp_associate.policy_support =
cpu_to_le16(tmp_associate.policy_support);
@@ -2122,80 +2169,55 @@
cpu_to_le16(tmp_associate.beacon_interval);
tmp_associate.atim_window = cpu_to_le16(tmp_associate.atim_window);
- if (!priv || !associate) {
- IPW_ERROR("Invalid args\n");
- return -1;
- }
-
- memcpy(cmd.param, &tmp_associate, sizeof(*associate));
- return ipw_send_cmd(priv, &cmd);
+ return ipw_send_cmd_pdu(priv, IPW_CMD_ASSOCIATE, sizeof(tmp_associate),
+ &tmp_associate);
}
static int ipw_send_supported_rates(struct ipw_priv *priv,
struct ipw_supported_rates *rates)
{
- struct host_cmd cmd = {
- .cmd = IPW_CMD_SUPPORTED_RATES,
- .len = sizeof(*rates)
- };
-
if (!priv || !rates) {
IPW_ERROR("Invalid args\n");
return -1;
}
- memcpy(cmd.param, rates, sizeof(*rates));
- return ipw_send_cmd(priv, &cmd);
+ return ipw_send_cmd_pdu(priv, IPW_CMD_SUPPORTED_RATES, sizeof(*rates),
+ rates);
}
static int ipw_set_random_seed(struct ipw_priv *priv)
{
- struct host_cmd cmd = {
- .cmd = IPW_CMD_SEED_NUMBER,
- .len = sizeof(u32)
- };
+ u32 val;
if (!priv) {
IPW_ERROR("Invalid args\n");
return -1;
}
- get_random_bytes(&cmd.param, sizeof(u32));
+ get_random_bytes(&val, sizeof(val));
- return ipw_send_cmd(priv, &cmd);
+ return ipw_send_cmd_pdu(priv, IPW_CMD_SEED_NUMBER, sizeof(val), &val);
}
static int ipw_send_card_disable(struct ipw_priv *priv, u32 phy_off)
{
- struct host_cmd cmd = {
- .cmd = IPW_CMD_CARD_DISABLE,
- .len = sizeof(u32)
- };
-
if (!priv) {
IPW_ERROR("Invalid args\n");
return -1;
}
- *((u32 *) & cmd.param) = phy_off;
-
- return ipw_send_cmd(priv, &cmd);
+ return ipw_send_cmd_pdu(priv, IPW_CMD_CARD_DISABLE, sizeof(phy_off),
+ &phy_off);
}
static int ipw_send_tx_power(struct ipw_priv *priv, struct ipw_tx_power *power)
{
- struct host_cmd cmd = {
- .cmd = IPW_CMD_TX_POWER,
- .len = sizeof(*power)
- };
-
if (!priv || !power) {
IPW_ERROR("Invalid args\n");
return -1;
}
- memcpy(cmd.param, power, sizeof(*power));
- return ipw_send_cmd(priv, &cmd);
+ return ipw_send_cmd_pdu(priv, IPW_CMD_TX_POWER, sizeof(*power), power);
}
static int ipw_set_tx_power(struct ipw_priv *priv)
@@ -2247,18 +2269,14 @@
struct ipw_rts_threshold rts_threshold = {
.rts_threshold = rts,
};
- struct host_cmd cmd = {
- .cmd = IPW_CMD_RTS_THRESHOLD,
- .len = sizeof(rts_threshold)
- };
if (!priv) {
IPW_ERROR("Invalid args\n");
return -1;
}
- memcpy(cmd.param, &rts_threshold, sizeof(rts_threshold));
- return ipw_send_cmd(priv, &cmd);
+ return ipw_send_cmd_pdu(priv, IPW_CMD_RTS_THRESHOLD,
+ sizeof(rts_threshold), &rts_threshold);
}
static int ipw_send_frag_threshold(struct ipw_priv *priv, u16 frag)
@@ -2266,27 +2284,19 @@
struct ipw_frag_threshold frag_threshold = {
.frag_threshold = frag,
};
- struct host_cmd cmd = {
- .cmd = IPW_CMD_FRAG_THRESHOLD,
- .len = sizeof(frag_threshold)
- };
if (!priv) {
IPW_ERROR("Invalid args\n");
return -1;
}
- memcpy(cmd.param, &frag_threshold, sizeof(frag_threshold));
- return ipw_send_cmd(priv, &cmd);
+ return ipw_send_cmd_pdu(priv, IPW_CMD_FRAG_THRESHOLD,
+ sizeof(frag_threshold), &frag_threshold);
}
static int ipw_send_power_mode(struct ipw_priv *priv, u32 mode)
{
- struct host_cmd cmd = {
- .cmd = IPW_CMD_POWER_MODE,
- .len = sizeof(u32)
- };
- u32 *param = (u32 *) (&cmd.param);
+ u32 param;
if (!priv) {
IPW_ERROR("Invalid args\n");
@@ -2297,17 +2307,18 @@
* level */
switch (mode) {
case IPW_POWER_BATTERY:
- *param = IPW_POWER_INDEX_3;
+ param = IPW_POWER_INDEX_3;
break;
case IPW_POWER_AC:
- *param = IPW_POWER_MODE_CAM;
+ param = IPW_POWER_MODE_CAM;
break;
default:
- *param = mode;
+ param = mode;
break;
}
- return ipw_send_cmd(priv, &cmd);
+ return ipw_send_cmd_pdu(priv, IPW_CMD_POWER_MODE, sizeof(param),
+ ¶m);
}
static int ipw_send_retry_limit(struct ipw_priv *priv, u8 slimit, u8 llimit)
@@ -2316,18 +2327,14 @@
.short_retry_limit = slimit,
.long_retry_limit = llimit
};
- struct host_cmd cmd = {
- .cmd = IPW_CMD_RETRY_LIMIT,
- .len = sizeof(retry_limit)
- };
if (!priv) {
IPW_ERROR("Invalid args\n");
return -1;
}
- memcpy(cmd.param, &retry_limit, sizeof(retry_limit));
- return ipw_send_cmd(priv, &cmd);
+ return ipw_send_cmd_pdu(priv, IPW_CMD_RETRY_LIMIT, sizeof(retry_limit),
+ &retry_limit);
}
/*
@@ -2454,7 +2461,7 @@
/*
If the data looks correct, then copy it to our private
copy. Otherwise let the firmware know to perform the operation
- on it's own
+ on its own.
*/
if (priv->eeprom[EEPROM_VERSION] != 0) {
IPW_DEBUG_INFO("Writing EEPROM data into SRAM\n");
@@ -2707,22 +2714,25 @@
static int ipw_fw_dma_wait(struct ipw_priv *priv)
{
- u32 current_index = 0;
+ u32 current_index = 0, previous_index;
u32 watchdog = 0;
IPW_DEBUG_FW(">> : \n");
current_index = ipw_fw_dma_command_block_index(priv);
- IPW_DEBUG_FW_INFO("sram_desc.last_cb_index:0x%8X\n",
+ IPW_DEBUG_FW_INFO("sram_desc.last_cb_index:0x%08X\n",
(int)priv->sram_desc.last_cb_index);
while (current_index < priv->sram_desc.last_cb_index) {
udelay(50);
+ previous_index = current_index;
current_index = ipw_fw_dma_command_block_index(priv);
- watchdog++;
-
- if (watchdog > 400) {
+ if (previous_index < current_index) {
+ watchdog = 0;
+ continue;
+ }
+ if (++watchdog > 400) {
IPW_DEBUG_FW_INFO("Timeout\n");
ipw_fw_dma_dump_command_block(priv);
ipw_fw_dma_abort(priv);
@@ -2772,6 +2782,7 @@
return ipw_read32(priv, 0x90) == 0xd55555d5;
}
+/* timeout in msec, attempted in 10-msec quanta */
static int ipw_poll_bit(struct ipw_priv *priv, u32 addr, u32 mask,
int timeout)
{
@@ -2800,10 +2811,11 @@
/* stop master. typical delay - 0 */
ipw_set_bit(priv, IPW_RESET_REG, IPW_RESET_REG_STOP_MASTER);
+ /* timeout is in msec, polled in 10-msec quanta */
rc = ipw_poll_bit(priv, IPW_RESET_REG,
IPW_RESET_REG_MASTER_DISABLED, 100);
if (rc < 0) {
- IPW_ERROR("stop master failed in 10ms\n");
+ IPW_ERROR("wait for stop master failed after 100ms\n");
return -1;
}
@@ -2890,8 +2902,8 @@
mdelay(1);
/* enable ucode store */
- ipw_write_reg8(priv, DINO_CONTROL_REG, 0x0);
- ipw_write_reg8(priv, DINO_CONTROL_REG, DINO_ENABLE_CS);
+ ipw_write_reg8(priv, IPW_BASEBAND_CONTROL_STATUS, 0x0);
+ ipw_write_reg8(priv, IPW_BASEBAND_CONTROL_STATUS, DINO_ENABLE_CS);
mdelay(1);
/* write ucode */
@@ -3036,7 +3048,7 @@
rc = ipw_poll_bit(priv, IPW_RESET_REG,
IPW_RESET_REG_MASTER_DISABLED, 500);
if (rc < 0) {
- IPW_ERROR("wait for reg master disabled failed\n");
+ IPW_ERROR("wait for reg master disabled failed after 500ms\n");
return rc;
}
@@ -3209,55 +3221,31 @@
const struct firmware *firmware = NULL;
const struct firmware *ucode = NULL;
#endif
+ char *ucode_name;
+ char *fw_name;
int rc = 0, retries = 3;
-#ifdef CONFIG_PM
- if (!fw_loaded) {
-#endif
- rc = ipw_get_fw(priv, &bootfw, IPW_FW_NAME("boot"));
- if (rc)
- goto error;
-
- switch (priv->ieee->iw_mode) {
- case IW_MODE_ADHOC:
- rc = ipw_get_fw(priv, &ucode,
- IPW_FW_NAME("ibss_ucode"));
- if (rc)
- goto error;
-
- rc = ipw_get_fw(priv, &firmware, IPW_FW_NAME("ibss"));
- break;
-
+ switch (priv->ieee->iw_mode) {
+ case IW_MODE_ADHOC:
+ ucode_name = IPW_FW_NAME("ibss_ucode");
+ fw_name = IPW_FW_NAME("ibss");
+ break;
#ifdef CONFIG_IPW2200_MONITOR
- case IW_MODE_MONITOR:
- rc = ipw_get_fw(priv, &ucode,
- IPW_FW_NAME("sniffer_ucode"));
- if (rc)
- goto error;
-
- rc = ipw_get_fw(priv, &firmware,
- IPW_FW_NAME("sniffer"));
- break;
+ case IW_MODE_MONITOR:
+ ucode_name = IPW_FW_NAME("sniffer_ucode");
+ fw_name = IPW_FW_NAME("sniffer");
+ break;
#endif
- case IW_MODE_INFRA:
- rc = ipw_get_fw(priv, &ucode, IPW_FW_NAME("bss_ucode"));
- if (rc)
- goto error;
-
- rc = ipw_get_fw(priv, &firmware, IPW_FW_NAME("bss"));
- break;
-
- default:
- rc = -EINVAL;
- }
-
- if (rc)
- goto error;
-
-#ifdef CONFIG_PM
- fw_loaded = 1;
+ case IW_MODE_INFRA:
+ ucode_name = IPW_FW_NAME("bss_ucode");
+ fw_name = IPW_FW_NAME("bss");
+ break;
+ default:
+ rc = -EINVAL;
}
-#endif
+
+ if (rc < 0)
+ goto error;
if (!priv->rxq)
priv->rxq = ipw_rx_queue_alloc(priv);
@@ -3279,7 +3267,7 @@
ipw_stop_nic(priv);
rc = ipw_reset_nic(priv);
- if (rc) {
+ if (rc < 0) {
IPW_ERROR("Unable to reset NIC\n");
goto error;
}
@@ -3287,6 +3275,15 @@
ipw_zero_memory(priv, IPW_NIC_SRAM_LOWER_BOUND,
IPW_NIC_SRAM_UPPER_BOUND - IPW_NIC_SRAM_LOWER_BOUND);
+#ifdef CONFIG_PM
+ if (!fw_loaded) {
+#endif
+ rc = ipw_get_fw(priv, &bootfw, IPW_FW_NAME("boot"));
+ if (rc < 0)
+ goto error;
+#ifdef CONFIG_PM
+ }
+#endif
/* DMA the initial boot firmware into the device */
rc = ipw_load_firmware(priv, bootfw->data + sizeof(struct fw_header),
bootfw->size - sizeof(struct fw_header));
@@ -3298,7 +3295,7 @@
/* kick start the device */
ipw_start_nic(priv);
- /* wait for the device to finish it's initial startup sequence */
+ /* wait for the device to finish its initial startup sequence */
rc = ipw_poll_bit(priv, IPW_INTA_RW,
IPW_INTA_BIT_FW_INITIALIZATION_DONE, 500);
if (rc < 0) {
@@ -3310,6 +3307,16 @@
/* ack fw init done interrupt */
ipw_write32(priv, IPW_INTA_RW, IPW_INTA_BIT_FW_INITIALIZATION_DONE);
+#ifdef CONFIG_PM
+ if (!fw_loaded) {
+#endif
+ rc = ipw_get_fw(priv, &ucode, ucode_name);
+ if (rc < 0)
+ goto error;
+#ifdef CONFIG_PM
+ }
+#endif
+
/* DMA the ucode into the device */
rc = ipw_load_ucode(priv, ucode->data + sizeof(struct fw_header),
ucode->size - sizeof(struct fw_header));
@@ -3321,6 +3328,16 @@
/* stop nic */
ipw_stop_nic(priv);
+#ifdef CONFIG_PM
+ if (!fw_loaded) {
+#endif
+ rc = ipw_get_fw(priv, &firmware, fw_name);
+ if (rc < 0)
+ goto error;
+#ifdef CONFIG_PM
+ }
+#endif
+
/* DMA bss firmware into the device */
rc = ipw_load_firmware(priv, firmware->data +
sizeof(struct fw_header),
@@ -3329,11 +3346,14 @@
IPW_ERROR("Unable to load firmware: %d\n", rc);
goto error;
}
+#ifdef CONFIG_PM
+ fw_loaded = 1;
+#endif
ipw_write32(priv, IPW_EEPROM_LOAD_DISABLE, 0);
rc = ipw_queue_reset(priv);
- if (rc) {
+ if (rc < 0) {
IPW_ERROR("Unable to initialize queues\n");
goto error;
}
@@ -3362,7 +3382,7 @@
rc = ipw_poll_bit(priv, IPW_INTA_RW,
IPW_INTA_BIT_FW_INITIALIZATION_DONE, 500);
if (rc < 0) {
- IPW_ERROR("device failed to start after 500ms\n");
+ IPW_ERROR("device failed to start within 500ms\n");
goto error;
}
IPW_DEBUG_INFO("device response after %dms\n", rc);
@@ -3715,9 +3735,9 @@
static void ipw_bg_disassociate(void *data)
{
struct ipw_priv *priv = data;
- down(&priv->sem);
+ mutex_lock(&priv->mutex);
ipw_disassociate(data);
- up(&priv->sem);
+ mutex_unlock(&priv->mutex);
}
static void ipw_system_config(void *data)
@@ -4077,9 +4097,9 @@
static void ipw_bg_gather_stats(void *data)
{
struct ipw_priv *priv = data;
- down(&priv->sem);
+ mutex_lock(&priv->mutex);
ipw_gather_stats(data);
- up(&priv->sem);
+ mutex_unlock(&priv->mutex);
}
/* Missed beacon behavior:
@@ -4121,8 +4141,9 @@
return;
}
- if (missed_count > priv->roaming_threshold &&
- missed_count <= priv->disassociate_threshold) {
+ if (roaming &&
+ (missed_count > priv->roaming_threshold &&
+ missed_count <= priv->disassociate_threshold)) {
/* If we are not already roaming, set the ROAM
* bit in the status and kick off a scan.
* This can happen several times before we reach
@@ -4150,7 +4171,6 @@
}
IPW_DEBUG_NOTIF("Missed beacon: %d\n", missed_count);
-
}
/**
@@ -4911,13 +4931,13 @@
static void ipw_bg_rx_queue_replenish(void *data)
{
struct ipw_priv *priv = data;
- down(&priv->sem);
+ mutex_lock(&priv->mutex);
ipw_rx_queue_replenish(data);
- up(&priv->sem);
+ mutex_unlock(&priv->mutex);
}
/* Assumes that the skb field of the buffers in 'pool' is kept accurate.
- * If an SKB has been detached, the POOL needs to have it's SKB set to NULL
+ * If an SKB has been detached, the POOL needs to have its SKB set to NULL
* This free routine walks the list of POOL entries and if SKB is set to
* non NULL it is unmapped and freed
*/
@@ -5257,10 +5277,11 @@
if (priv->ieee->scan_age != 0 &&
time_after(jiffies, network->last_scanned + priv->ieee->scan_age)) {
IPW_DEBUG_MERGE("Network '%s (" MAC_FMT ")' excluded "
- "because of age: %lums.\n",
+ "because of age: %ums.\n",
escape_essid(network->ssid, network->ssid_len),
MAC_ARG(network->bssid),
- 1000 * (jiffies - network->last_scanned) / HZ);
+ jiffies_to_msecs(jiffies -
+ network->last_scanned));
return 0;
}
@@ -5369,7 +5390,7 @@
return;
}
- down(&priv->sem);
+ mutex_lock(&priv->mutex);
if ((priv->ieee->iw_mode == IW_MODE_ADHOC)) {
IPW_DEBUG_MERGE("remove network %s\n",
escape_essid(priv->essid,
@@ -5379,7 +5400,7 @@
ipw_disassociate(priv);
priv->assoc_network = match.network;
- up(&priv->sem);
+ mutex_unlock(&priv->mutex);
return;
}
}
@@ -5467,11 +5488,12 @@
if (network->last_associate &&
time_after(network->last_associate + (HZ * 3UL), jiffies)) {
IPW_DEBUG_ASSOC("Network '%s (" MAC_FMT ")' excluded "
- "because of storming (%lus since last "
+ "because of storming (%ums since last "
"assoc attempt).\n",
escape_essid(network->ssid, network->ssid_len),
MAC_ARG(network->bssid),
- (jiffies - network->last_associate) / HZ);
+ jiffies_to_msecs(jiffies -
+ network->last_associate));
return 0;
}
@@ -5479,10 +5501,11 @@
if (priv->ieee->scan_age != 0 &&
time_after(jiffies, network->last_scanned + priv->ieee->scan_age)) {
IPW_DEBUG_ASSOC("Network '%s (" MAC_FMT ")' excluded "
- "because of age: %lums.\n",
+ "because of age: %ums.\n",
escape_essid(network->ssid, network->ssid_len),
MAC_ARG(network->bssid),
- 1000 * (jiffies - network->last_scanned) / HZ);
+ jiffies_to_msecs(jiffies -
+ network->last_scanned));
return 0;
}
@@ -5510,8 +5533,8 @@
return 0;
}
- if (!priv->ieee->wpa_enabled && (network->wpa_ie_len > 0 ||
- network->rsn_ie_len > 0)) {
+ if (priv->ieee->wpa_enabled &&
+ network->wpa_ie_len == 0 && network->rsn_ie_len == 0) {
IPW_DEBUG_ASSOC("Network '%s (" MAC_FMT ")' excluded "
"because of WPA capability mismatch.\n",
escape_essid(network->ssid, network->ssid_len),
@@ -5671,54 +5694,44 @@
static void ipw_send_tgi_tx_key(struct ipw_priv *priv, int type, int index)
{
- struct ipw_tgi_tx_key *key;
- struct host_cmd cmd = {
- .cmd = IPW_CMD_TGI_TX_KEY,
- .len = sizeof(*key)
- };
+ struct ipw_tgi_tx_key key;
if (!(priv->ieee->sec.flags & (1 << index)))
return;
- key = (struct ipw_tgi_tx_key *)&cmd.param;
- key->key_id = index;
- memcpy(key->key, priv->ieee->sec.keys[index], SCM_TEMPORAL_KEY_LENGTH);
- key->security_type = type;
- key->station_index = 0; /* always 0 for BSS */
- key->flags = 0;
+ key.key_id = index;
+ memcpy(key.key, priv->ieee->sec.keys[index], SCM_TEMPORAL_KEY_LENGTH);
+ key.security_type = type;
+ key.station_index = 0; /* always 0 for BSS */
+ key.flags = 0;
/* 0 for new key; previous value of counter (after fatal error) */
- key->tx_counter[0] = 0;
- key->tx_counter[1] = 0;
+ key.tx_counter[0] = 0;
+ key.tx_counter[1] = 0;
- ipw_send_cmd(priv, &cmd);
+ ipw_send_cmd_pdu(priv, IPW_CMD_TGI_TX_KEY, sizeof(key), &key);
}
static void ipw_send_wep_keys(struct ipw_priv *priv, int type)
{
- struct ipw_wep_key *key;
+ struct ipw_wep_key key;
int i;
- struct host_cmd cmd = {
- .cmd = IPW_CMD_WEP_KEY,
- .len = sizeof(*key)
- };
- key = (struct ipw_wep_key *)&cmd.param;
- key->cmd_id = DINO_CMD_WEP_KEY;
- key->seq_num = 0;
+ key.cmd_id = DINO_CMD_WEP_KEY;
+ key.seq_num = 0;
/* Note: AES keys cannot be set for multiple times.
* Only set it at the first time. */
for (i = 0; i < 4; i++) {
- key->key_index = i | type;
+ key.key_index = i | type;
if (!(priv->ieee->sec.flags & (1 << i))) {
- key->key_size = 0;
+ key.key_size = 0;
continue;
}
- key->key_size = priv->ieee->sec.key_sizes[i];
- memcpy(key->key, priv->ieee->sec.keys[i], key->key_size);
+ key.key_size = priv->ieee->sec.key_sizes[i];
+ memcpy(key.key, priv->ieee->sec.keys[i], key.key_size);
- ipw_send_cmd(priv, &cmd);
+ ipw_send_cmd_pdu(priv, IPW_CMD_WEP_KEY, sizeof(key), &key);
}
}
@@ -5822,9 +5835,9 @@
static void ipw_bg_adhoc_check(void *data)
{
struct ipw_priv *priv = data;
- down(&priv->sem);
+ mutex_lock(&priv->mutex);
ipw_adhoc_check(data);
- up(&priv->sem);
+ mutex_unlock(&priv->mutex);
}
#ifdef CONFIG_IPW2200_DEBUG
@@ -6051,7 +6064,7 @@
(priv->status & STATUS_EXIT_PENDING))
return 0;
- down(&priv->sem);
+ mutex_lock(&priv->mutex);
if (priv->status & STATUS_SCANNING) {
IPW_DEBUG_HC("Concurrent scan requested. Ignoring.\n");
@@ -6159,16 +6172,16 @@
queue_delayed_work(priv->workqueue, &priv->scan_check,
IPW_SCAN_CHECK_WATCHDOG);
done:
- up(&priv->sem);
+ mutex_unlock(&priv->mutex);
return err;
}
static void ipw_bg_abort_scan(void *data)
{
struct ipw_priv *priv = data;
- down(&priv->sem);
+ mutex_lock(&priv->mutex);
ipw_abort_scan(data);
- up(&priv->sem);
+ mutex_unlock(&priv->mutex);
}
static int ipw_wpa_enable(struct ipw_priv *priv, int value)
@@ -6193,6 +6206,9 @@
} else if (value & IW_AUTH_ALG_OPEN_SYSTEM) {
sec.auth_mode = WLAN_AUTH_OPEN;
ieee->open_wep = 1;
+ } else if (value & IW_AUTH_ALG_LEAP) {
+ sec.auth_mode = WLAN_AUTH_LEAP;
+ ieee->open_wep = 1;
} else
return -EINVAL;
@@ -6204,7 +6220,8 @@
return ret;
}
-void ipw_wpa_assoc_frame(struct ipw_priv *priv, char *wpa_ie, int wpa_ie_len)
+static void ipw_wpa_assoc_frame(struct ipw_priv *priv, char *wpa_ie,
+ int wpa_ie_len)
{
/* make sure WPA is enabled */
ipw_wpa_enable(priv, 1);
@@ -6215,15 +6232,10 @@
static int ipw_set_rsn_capa(struct ipw_priv *priv,
char *capabilities, int length)
{
- struct host_cmd cmd = {
- .cmd = IPW_CMD_RSN_CAPABILITIES,
- .len = length,
- };
-
IPW_DEBUG_HC("HOST_CMD_RSN_CAPABILITIES\n");
- memcpy(cmd.param, capabilities, length);
- return ipw_send_cmd(priv, &cmd);
+ return ipw_send_cmd_pdu(priv, IPW_CMD_RSN_CAPABILITIES, length,
+ capabilities);
}
/*
@@ -6244,7 +6256,7 @@
(wrqu->data.length && extra == NULL))
return -EINVAL;
- //down(&priv->sem);
+ //mutex_lock(&priv->mutex);
//if (!ieee->wpa_enabled) {
// err = -EOPNOTSUPP;
@@ -6270,7 +6282,7 @@
ipw_wpa_assoc_frame(priv, ieee->wpa_ie, ieee->wpa_ie_len);
out:
- //up(&priv->sem);
+ //mutex_unlock(&priv->mutex);
return err;
}
@@ -6283,7 +6295,7 @@
struct ieee80211_device *ieee = priv->ieee;
int err = 0;
- //down(&priv->sem);
+ //mutex_lock(&priv->mutex);
//if (!ieee->wpa_enabled) {
// err = -EOPNOTSUPP;
@@ -6304,7 +6316,7 @@
memcpy(extra, ieee->wpa_ie, ieee->wpa_ie_len);
out:
- //up(&priv->sem);
+ //mutex_unlock(&priv->mutex);
return err;
}
@@ -6964,12 +6976,12 @@
if (priv == NULL)
return;
- down(&priv->sem);
+ mutex_lock(&priv->mutex);
if (priv->status & STATUS_ASSOCIATED)
ipw_qos_activate(priv, &(priv->assoc_network->qos_data));
- up(&priv->sem);
+ mutex_unlock(&priv->mutex);
}
static int ipw_handle_probe_response(struct net_device *dev,
@@ -7010,25 +7022,15 @@
static int ipw_send_qos_params_command(struct ipw_priv *priv, struct ieee80211_qos_parameters
*qos_param)
{
- struct host_cmd cmd = {
- .cmd = IPW_CMD_QOS_PARAMETERS,
- .len = (sizeof(struct ieee80211_qos_parameters) * 3)
- };
-
- memcpy(cmd.param, qos_param, sizeof(*qos_param) * 3);
- return ipw_send_cmd(priv, &cmd);
+ return ipw_send_cmd_pdu(priv, IPW_CMD_QOS_PARAMETERS,
+ sizeof(*qos_param) * 3, qos_param);
}
static int ipw_send_qos_info_command(struct ipw_priv *priv, struct ieee80211_qos_information_element
*qos_param)
{
- struct host_cmd cmd = {
- .cmd = IPW_CMD_WME_INFO,
- .len = sizeof(*qos_param)
- };
-
- memcpy(cmd.param, qos_param, sizeof(*qos_param));
- return ipw_send_cmd(priv, &cmd);
+ return ipw_send_cmd_pdu(priv, IPW_CMD_WME_INFO, sizeof(*qos_param),
+ qos_param);
}
#endif /* CONFIG_IPW_QOS */
@@ -7052,19 +7054,21 @@
memset(&priv->assoc_request, 0, sizeof(priv->assoc_request));
priv->assoc_request.channel = network->channel;
+ priv->assoc_request.auth_key = 0;
+
if ((priv->capability & CAP_PRIVACY_ON) &&
- (priv->capability & CAP_SHARED_KEY)) {
+ (priv->ieee->sec.auth_mode == WLAN_AUTH_SHARED_KEY)) {
priv->assoc_request.auth_type = AUTH_SHARED_KEY;
priv->assoc_request.auth_key = priv->ieee->sec.active_key;
- if ((priv->capability & CAP_PRIVACY_ON) &&
- (priv->ieee->sec.level == SEC_LEVEL_1) &&
- !(priv->ieee->host_encrypt || priv->ieee->host_decrypt))
+ if (priv->ieee->sec.level == SEC_LEVEL_1)
ipw_send_wep_keys(priv, DCW_WEP_KEY_SEC_TYPE_WEP);
- } else {
+
+ } else if ((priv->capability & CAP_PRIVACY_ON) &&
+ (priv->ieee->sec.auth_mode == WLAN_AUTH_LEAP))
+ priv->assoc_request.auth_type = AUTH_LEAP;
+ else
priv->assoc_request.auth_type = AUTH_OPEN;
- priv->assoc_request.auth_key = 0;
- }
if (priv->ieee->wpa_ie_len) {
priv->assoc_request.policy_support = 0x02; /* RSN active */
@@ -7278,9 +7282,9 @@
static void ipw_bg_roam(void *data)
{
struct ipw_priv *priv = data;
- down(&priv->sem);
+ mutex_lock(&priv->mutex);
ipw_roam(data);
- up(&priv->sem);
+ mutex_unlock(&priv->mutex);
}
static int ipw_associate(void *data)
@@ -7375,9 +7379,9 @@
static void ipw_bg_associate(void *data)
{
struct ipw_priv *priv = data;
- down(&priv->sem);
+ mutex_lock(&priv->mutex);
ipw_associate(data);
- up(&priv->sem);
+ mutex_unlock(&priv->mutex);
}
static void ipw_rebuild_decrypted_skb(struct ipw_priv *priv,
@@ -8126,7 +8130,7 @@
union iwreq_data *wrqu, char *extra)
{
struct ipw_priv *priv = ieee80211_priv(dev);
- down(&priv->sem);
+ mutex_lock(&priv->mutex);
if (priv->status & STATUS_RF_KILL_MASK)
strcpy(wrqu->name, "radio off");
else if (!(priv->status & STATUS_ASSOCIATED))
@@ -8135,7 +8139,7 @@
snprintf(wrqu->name, IFNAMSIZ, "IEEE 802.11%c",
ipw_modes[priv->assoc_request.ieee_mode]);
IPW_DEBUG_WX("Name: %s\n", wrqu->name);
- up(&priv->sem);
+ mutex_unlock(&priv->mutex);
return 0;
}
@@ -8204,9 +8208,9 @@
if (fwrq->m == 0) {
IPW_DEBUG_WX("SET Freq/Channel -> any\n");
- down(&priv->sem);
+ mutex_lock(&priv->mutex);
ret = ipw_set_channel(priv, 0);
- up(&priv->sem);
+ mutex_unlock(&priv->mutex);
return ret;
}
/* if setting by freq convert to channel */
@@ -8234,9 +8238,9 @@
}
IPW_DEBUG_WX("SET Freq/Channel -> %d \n", fwrq->m);
- down(&priv->sem);
+ mutex_lock(&priv->mutex);
ret = ipw_set_channel(priv, channel);
- up(&priv->sem);
+ mutex_unlock(&priv->mutex);
return ret;
}
@@ -8250,14 +8254,14 @@
/* If we are associated, trying to associate, or have a statically
* configured CHANNEL then return that; otherwise return ANY */
- down(&priv->sem);
+ mutex_lock(&priv->mutex);
if (priv->config & CFG_STATIC_CHANNEL ||
priv->status & (STATUS_ASSOCIATING | STATUS_ASSOCIATED))
wrqu->freq.m = priv->channel;
else
wrqu->freq.m = 0;
- up(&priv->sem);
+ mutex_unlock(&priv->mutex);
IPW_DEBUG_WX("GET Freq/Channel -> %d \n", priv->channel);
return 0;
}
@@ -8287,7 +8291,7 @@
if (wrqu->mode == priv->ieee->iw_mode)
return 0;
- down(&priv->sem);
+ mutex_lock(&priv->mutex);
ipw_sw_reset(priv, 0);
@@ -8310,7 +8314,7 @@
priv->ieee->iw_mode = wrqu->mode;
queue_work(priv->workqueue, &priv->adapter_restart);
- up(&priv->sem);
+ mutex_unlock(&priv->mutex);
return err;
}
@@ -8319,10 +8323,10 @@
union iwreq_data *wrqu, char *extra)
{
struct ipw_priv *priv = ieee80211_priv(dev);
- down(&priv->sem);
+ mutex_lock(&priv->mutex);
wrqu->mode = priv->ieee->iw_mode;
IPW_DEBUG_WX("Get MODE -> %d\n", wrqu->mode);
- up(&priv->sem);
+ mutex_unlock(&priv->mutex);
return 0;
}
@@ -8369,7 +8373,7 @@
range->avg_qual.level = 0; /* FIXME to real average level */
range->avg_qual.noise = 0;
range->avg_qual.updated = 7; /* Updated all three */
- down(&priv->sem);
+ mutex_lock(&priv->mutex);
range->num_bitrates = min(priv->rates.num_rates, (u8) IW_MAX_BITRATES);
for (i = 0; i < range->num_bitrates; i++)
@@ -8387,7 +8391,7 @@
/* Set the Wireless Extension versions */
range->we_version_compiled = WIRELESS_EXT;
- range->we_version_source = 16;
+ range->we_version_source = 18;
i = 0;
if (priv->ieee->mode & (IEEE_B | IEEE_G)) {
@@ -8411,7 +8415,7 @@
range->num_channels = i;
range->num_frequency = i;
- up(&priv->sem);
+ mutex_unlock(&priv->mutex);
/* Event capability (kernel + driver) */
range->event_capa[0] = (IW_EVENT_CAPA_K_0 |
@@ -8419,6 +8423,9 @@
IW_EVENT_CAPA_MASK(SIOCGIWAP));
range->event_capa[1] = IW_EVENT_CAPA_K_1;
+ range->enc_capa = IW_ENC_CAPA_WPA | IW_ENC_CAPA_WPA2 |
+ IW_ENC_CAPA_CIPHER_TKIP | IW_ENC_CAPA_CIPHER_CCMP;
+
IPW_DEBUG_WX("GET Range\n");
return 0;
}
@@ -8438,7 +8445,7 @@
if (wrqu->ap_addr.sa_family != ARPHRD_ETHER)
return -EINVAL;
- down(&priv->sem);
+ mutex_lock(&priv->mutex);
if (!memcmp(any, wrqu->ap_addr.sa_data, ETH_ALEN) ||
!memcmp(off, wrqu->ap_addr.sa_data, ETH_ALEN)) {
/* we disable mandatory BSSID association */
@@ -8447,14 +8454,14 @@
IPW_DEBUG_ASSOC("Attempting to associate with new "
"parameters.\n");
ipw_associate(priv);
- up(&priv->sem);
+ mutex_unlock(&priv->mutex);
return 0;
}
priv->config |= CFG_STATIC_BSSID;
if (!memcmp(priv->bssid, wrqu->ap_addr.sa_data, ETH_ALEN)) {
IPW_DEBUG_WX("BSSID set to current BSSID.\n");
- up(&priv->sem);
+ mutex_unlock(&priv->mutex);
return 0;
}
@@ -8468,7 +8475,7 @@
if (!ipw_disassociate(priv))
ipw_associate(priv);
- up(&priv->sem);
+ mutex_unlock(&priv->mutex);
return 0;
}
@@ -8479,7 +8486,7 @@
struct ipw_priv *priv = ieee80211_priv(dev);
/* If we are associated, trying to associate, or have a statically
* configured BSSID then return that; otherwise return ANY */
- down(&priv->sem);
+ mutex_lock(&priv->mutex);
if (priv->config & CFG_STATIC_BSSID ||
priv->status & (STATUS_ASSOCIATED | STATUS_ASSOCIATING)) {
wrqu->ap_addr.sa_family = ARPHRD_ETHER;
@@ -8489,7 +8496,7 @@
IPW_DEBUG_WX("Getting WAP BSSID: " MAC_FMT "\n",
MAC_ARG(wrqu->ap_addr.sa_data));
- up(&priv->sem);
+ mutex_unlock(&priv->mutex);
return 0;
}
@@ -8500,7 +8507,7 @@
struct ipw_priv *priv = ieee80211_priv(dev);
char *essid = ""; /* ANY */
int length = 0;
- down(&priv->sem);
+ mutex_lock(&priv->mutex);
if (wrqu->essid.flags && wrqu->essid.length) {
length = wrqu->essid.length - 1;
essid = extra;
@@ -8515,7 +8522,7 @@
priv->config &= ~CFG_STATIC_ESSID;
ipw_associate(priv);
}
- up(&priv->sem);
+ mutex_unlock(&priv->mutex);
return 0;
}
@@ -8525,7 +8532,7 @@
if (priv->essid_len == length && !memcmp(priv->essid, extra, length)) {
IPW_DEBUG_WX("ESSID set to current ESSID.\n");
- up(&priv->sem);
+ mutex_unlock(&priv->mutex);
return 0;
}
@@ -8540,7 +8547,7 @@
if (!ipw_disassociate(priv))
ipw_associate(priv);
- up(&priv->sem);
+ mutex_unlock(&priv->mutex);
return 0;
}
@@ -8552,7 +8559,7 @@
/* If we are associated, trying to associate, or have a statically
* configured ESSID then return that; otherwise return ANY */
- down(&priv->sem);
+ mutex_lock(&priv->mutex);
if (priv->config & CFG_STATIC_ESSID ||
priv->status & (STATUS_ASSOCIATED | STATUS_ASSOCIATING)) {
IPW_DEBUG_WX("Getting essid: '%s'\n",
@@ -8565,7 +8572,7 @@
wrqu->essid.length = 0;
wrqu->essid.flags = 0; /* active */
}
- up(&priv->sem);
+ mutex_unlock(&priv->mutex);
return 0;
}
@@ -8578,12 +8585,12 @@
IPW_DEBUG_WX("Setting nick to '%s'\n", extra);
if (wrqu->data.length > IW_ESSID_MAX_SIZE)
return -E2BIG;
- down(&priv->sem);
+ mutex_lock(&priv->mutex);
wrqu->data.length = min((size_t) wrqu->data.length, sizeof(priv->nick));
memset(priv->nick, 0, sizeof(priv->nick));
memcpy(priv->nick, extra, wrqu->data.length);
IPW_DEBUG_TRACE("<<\n");
- up(&priv->sem);
+ mutex_unlock(&priv->mutex);
return 0;
}
@@ -8594,11 +8601,11 @@
{
struct ipw_priv *priv = ieee80211_priv(dev);
IPW_DEBUG_WX("Getting nick\n");
- down(&priv->sem);
+ mutex_lock(&priv->mutex);
wrqu->data.length = strlen(priv->nick) + 1;
memcpy(extra, priv->nick, wrqu->data.length);
wrqu->data.flags = 1; /* active */
- up(&priv->sem);
+ mutex_unlock(&priv->mutex);
return 0;
}
@@ -8691,7 +8698,7 @@
apply:
IPW_DEBUG_WX("Setting rate mask to 0x%08X [%s]\n",
mask, fixed ? "fixed" : "sub-rates");
- down(&priv->sem);
+ mutex_lock(&priv->mutex);
if (mask == IEEE80211_DEFAULT_RATES_MASK) {
priv->config &= ~CFG_FIXED_RATE;
ipw_set_fixed_rate(priv, priv->ieee->mode);
@@ -8700,7 +8707,7 @@
if (priv->rates_mask == mask) {
IPW_DEBUG_WX("Mask set to current mask.\n");
- up(&priv->sem);
+ mutex_unlock(&priv->mutex);
return 0;
}
@@ -8711,7 +8718,7 @@
if (!ipw_disassociate(priv))
ipw_associate(priv);
- up(&priv->sem);
+ mutex_unlock(&priv->mutex);
return 0;
}
@@ -8720,9 +8727,9 @@
union iwreq_data *wrqu, char *extra)
{
struct ipw_priv *priv = ieee80211_priv(dev);
- down(&priv->sem);
+ mutex_lock(&priv->mutex);
wrqu->bitrate.value = priv->last_rate;
- up(&priv->sem);
+ mutex_unlock(&priv->mutex);
IPW_DEBUG_WX("GET Rate -> %d \n", wrqu->bitrate.value);
return 0;
}
@@ -8732,20 +8739,20 @@
union iwreq_data *wrqu, char *extra)
{
struct ipw_priv *priv = ieee80211_priv(dev);
- down(&priv->sem);
+ mutex_lock(&priv->mutex);
if (wrqu->rts.disabled)
priv->rts_threshold = DEFAULT_RTS_THRESHOLD;
else {
if (wrqu->rts.value < MIN_RTS_THRESHOLD ||
wrqu->rts.value > MAX_RTS_THRESHOLD) {
- up(&priv->sem);
+ mutex_unlock(&priv->mutex);
return -EINVAL;
}
priv->rts_threshold = wrqu->rts.value;
}
ipw_send_rts_threshold(priv, priv->rts_threshold);
- up(&priv->sem);
+ mutex_unlock(&priv->mutex);
IPW_DEBUG_WX("SET RTS Threshold -> %d \n", priv->rts_threshold);
return 0;
}
@@ -8755,11 +8762,11 @@
union iwreq_data *wrqu, char *extra)
{
struct ipw_priv *priv = ieee80211_priv(dev);
- down(&priv->sem);
+ mutex_lock(&priv->mutex);
wrqu->rts.value = priv->rts_threshold;
wrqu->rts.fixed = 0; /* no auto select */
wrqu->rts.disabled = (wrqu->rts.value == DEFAULT_RTS_THRESHOLD);
- up(&priv->sem);
+ mutex_unlock(&priv->mutex);
IPW_DEBUG_WX("GET RTS Threshold -> %d \n", wrqu->rts.value);
return 0;
}
@@ -8771,7 +8778,7 @@
struct ipw_priv *priv = ieee80211_priv(dev);
int err = 0;
- down(&priv->sem);
+ mutex_lock(&priv->mutex);
if (ipw_radio_kill_sw(priv, wrqu->power.disabled)) {
err = -EINPROGRESS;
goto out;
@@ -8794,7 +8801,7 @@
priv->tx_power = wrqu->power.value;
err = ipw_set_tx_power(priv);
out:
- up(&priv->sem);
+ mutex_unlock(&priv->mutex);
return err;
}
@@ -8803,12 +8810,12 @@
union iwreq_data *wrqu, char *extra)
{
struct ipw_priv *priv = ieee80211_priv(dev);
- down(&priv->sem);
+ mutex_lock(&priv->mutex);
wrqu->power.value = priv->tx_power;
wrqu->power.fixed = 1;
wrqu->power.flags = IW_TXPOW_DBM;
wrqu->power.disabled = (priv->status & STATUS_RF_KILL_MASK) ? 1 : 0;
- up(&priv->sem);
+ mutex_unlock(&priv->mutex);
IPW_DEBUG_WX("GET TX Power -> %s %d \n",
wrqu->power.disabled ? "OFF" : "ON", wrqu->power.value);
@@ -8821,13 +8828,13 @@
union iwreq_data *wrqu, char *extra)
{
struct ipw_priv *priv = ieee80211_priv(dev);
- down(&priv->sem);
+ mutex_lock(&priv->mutex);
if (wrqu->frag.disabled)
priv->ieee->fts = DEFAULT_FTS;
else {
if (wrqu->frag.value < MIN_FRAG_THRESHOLD ||
wrqu->frag.value > MAX_FRAG_THRESHOLD) {
- up(&priv->sem);
+ mutex_unlock(&priv->mutex);
return -EINVAL;
}
@@ -8835,7 +8842,7 @@
}
ipw_send_frag_threshold(priv, wrqu->frag.value);
- up(&priv->sem);
+ mutex_unlock(&priv->mutex);
IPW_DEBUG_WX("SET Frag Threshold -> %d \n", wrqu->frag.value);
return 0;
}
@@ -8845,11 +8852,11 @@
union iwreq_data *wrqu, char *extra)
{
struct ipw_priv *priv = ieee80211_priv(dev);
- down(&priv->sem);
+ mutex_lock(&priv->mutex);
wrqu->frag.value = priv->ieee->fts;
wrqu->frag.fixed = 0; /* no auto select */
wrqu->frag.disabled = (wrqu->frag.value == DEFAULT_FTS);
- up(&priv->sem);
+ mutex_unlock(&priv->mutex);
IPW_DEBUG_WX("GET Frag Threshold -> %d \n", wrqu->frag.value);
return 0;
@@ -8870,7 +8877,7 @@
if (wrqu->retry.value < 0 || wrqu->retry.value > 255)
return -EINVAL;
- down(&priv->sem);
+ mutex_lock(&priv->mutex);
if (wrqu->retry.flags & IW_RETRY_MIN)
priv->short_retry_limit = (u8) wrqu->retry.value;
else if (wrqu->retry.flags & IW_RETRY_MAX)
@@ -8882,7 +8889,7 @@
ipw_send_retry_limit(priv, priv->short_retry_limit,
priv->long_retry_limit);
- up(&priv->sem);
+ mutex_unlock(&priv->mutex);
IPW_DEBUG_WX("SET retry limit -> short:%d long:%d\n",
priv->short_retry_limit, priv->long_retry_limit);
return 0;
@@ -8894,11 +8901,11 @@
{
struct ipw_priv *priv = ieee80211_priv(dev);
- down(&priv->sem);
+ mutex_lock(&priv->mutex);
wrqu->retry.disabled = 0;
if ((wrqu->retry.flags & IW_RETRY_TYPE) == IW_RETRY_LIFETIME) {
- up(&priv->sem);
+ mutex_unlock(&priv->mutex);
return -EINVAL;
}
@@ -8912,7 +8919,7 @@
wrqu->retry.flags = IW_RETRY_LIMIT;
wrqu->retry.value = priv->short_retry_limit;
}
- up(&priv->sem);
+ mutex_unlock(&priv->mutex);
IPW_DEBUG_WX("GET retry -> %d \n", wrqu->retry.value);
@@ -8929,7 +8936,7 @@
(priv->status & STATUS_EXIT_PENDING))
return 0;
- down(&priv->sem);
+ mutex_lock(&priv->mutex);
if (priv->status & STATUS_RF_KILL_MASK) {
IPW_DEBUG_HC("Aborting scan due to RF kill activation\n");
@@ -8981,7 +8988,7 @@
priv->status |= STATUS_SCANNING;
done:
- up(&priv->sem);
+ mutex_unlock(&priv->mutex);
return err;
}
@@ -9024,7 +9031,7 @@
int ret;
u32 cap = priv->capability;
- down(&priv->sem);
+ mutex_lock(&priv->mutex);
ret = ieee80211_wx_set_encode(priv->ieee, info, wrqu, key);
/* In IBSS mode, we need to notify the firmware to update
@@ -9034,7 +9041,7 @@
priv->status & STATUS_ASSOCIATED)
ipw_disassociate(priv);
- up(&priv->sem);
+ mutex_unlock(&priv->mutex);
return ret;
}
@@ -9052,17 +9059,17 @@
{
struct ipw_priv *priv = ieee80211_priv(dev);
int err;
- down(&priv->sem);
+ mutex_lock(&priv->mutex);
if (wrqu->power.disabled) {
priv->power_mode = IPW_POWER_LEVEL(priv->power_mode);
err = ipw_send_power_mode(priv, IPW_POWER_MODE_CAM);
if (err) {
IPW_DEBUG_WX("failed setting power mode.\n");
- up(&priv->sem);
+ mutex_unlock(&priv->mutex);
return err;
}
IPW_DEBUG_WX("SET Power Management Mode -> off\n");
- up(&priv->sem);
+ mutex_unlock(&priv->mutex);
return 0;
}
@@ -9074,7 +9081,7 @@
default: /* Otherwise we don't support it */
IPW_DEBUG_WX("SET PM Mode: %X not supported.\n",
wrqu->power.flags);
- up(&priv->sem);
+ mutex_unlock(&priv->mutex);
return -EOPNOTSUPP;
}
@@ -9087,12 +9094,12 @@
err = ipw_send_power_mode(priv, IPW_POWER_LEVEL(priv->power_mode));
if (err) {
IPW_DEBUG_WX("failed setting power mode.\n");
- up(&priv->sem);
+ mutex_unlock(&priv->mutex);
return err;
}
IPW_DEBUG_WX("SET Power Management Mode -> 0x%02X\n", priv->power_mode);
- up(&priv->sem);
+ mutex_unlock(&priv->mutex);
return 0;
}
@@ -9101,13 +9108,13 @@
union iwreq_data *wrqu, char *extra)
{
struct ipw_priv *priv = ieee80211_priv(dev);
- down(&priv->sem);
+ mutex_lock(&priv->mutex);
if (!(priv->power_mode & IPW_POWER_ENABLED))
wrqu->power.disabled = 1;
else
wrqu->power.disabled = 0;
- up(&priv->sem);
+ mutex_unlock(&priv->mutex);
IPW_DEBUG_WX("GET Power Management Mode -> %02X\n", priv->power_mode);
return 0;
@@ -9120,7 +9127,7 @@
struct ipw_priv *priv = ieee80211_priv(dev);
int mode = *(int *)extra;
int err;
- down(&priv->sem);
+ mutex_lock(&priv->mutex);
if ((mode < 1) || (mode > IPW_POWER_LIMIT)) {
mode = IPW_POWER_AC;
priv->power_mode = mode;
@@ -9133,11 +9140,11 @@
if (err) {
IPW_DEBUG_WX("failed setting power mode.\n");
- up(&priv->sem);
+ mutex_unlock(&priv->mutex);
return err;
}
}
- up(&priv->sem);
+ mutex_unlock(&priv->mutex);
return 0;
}
@@ -9186,7 +9193,7 @@
IPW_WARNING("Attempt to set invalid wireless mode: %d\n", mode);
return -EINVAL;
}
- down(&priv->sem);
+ mutex_lock(&priv->mutex);
if (priv->adapter == IPW_2915ABG) {
priv->ieee->abg_true = 1;
if (mode & IEEE_A) {
@@ -9198,7 +9205,7 @@
if (mode & IEEE_A) {
IPW_WARNING("Attempt to set 2200BG into "
"802.11a mode\n");
- up(&priv->sem);
+ mutex_unlock(&priv->mutex);
return -EINVAL;
}
@@ -9235,7 +9242,7 @@
IPW_DEBUG_WX("PRIV SET MODE: %c%c%c\n",
mode & IEEE_A ? 'a' : '.',
mode & IEEE_B ? 'b' : '.', mode & IEEE_G ? 'g' : '.');
- up(&priv->sem);
+ mutex_unlock(&priv->mutex);
return 0;
}
@@ -9244,7 +9251,7 @@
union iwreq_data *wrqu, char *extra)
{
struct ipw_priv *priv = ieee80211_priv(dev);
- down(&priv->sem);
+ mutex_lock(&priv->mutex);
switch (priv->ieee->mode) {
case IEEE_A:
strncpy(extra, "802.11a (1)", MAX_WX_STRING);
@@ -9275,7 +9282,7 @@
IPW_DEBUG_WX("PRIV GET MODE: %s\n", extra);
wrqu->data.length = strlen(extra) + 1;
- up(&priv->sem);
+ mutex_unlock(&priv->mutex);
return 0;
}
@@ -9286,7 +9293,7 @@
{
struct ipw_priv *priv = ieee80211_priv(dev);
int mode = *(int *)extra;
- down(&priv->sem);
+ mutex_lock(&priv->mutex);
/* Switching from SHORT -> LONG requires a disassociation */
if (mode == 1) {
if (!(priv->config & CFG_PREAMBLE_LONG)) {
@@ -9305,11 +9312,11 @@
priv->config &= ~CFG_PREAMBLE_LONG;
goto done;
}
- up(&priv->sem);
+ mutex_unlock(&priv->mutex);
return -EINVAL;
done:
- up(&priv->sem);
+ mutex_unlock(&priv->mutex);
return 0;
}
@@ -9318,12 +9325,12 @@
union iwreq_data *wrqu, char *extra)
{
struct ipw_priv *priv = ieee80211_priv(dev);
- down(&priv->sem);
+ mutex_lock(&priv->mutex);
if (priv->config & CFG_PREAMBLE_LONG)
snprintf(wrqu->name, IFNAMSIZ, "long (1)");
else
snprintf(wrqu->name, IFNAMSIZ, "auto (0)");
- up(&priv->sem);
+ mutex_unlock(&priv->mutex);
return 0;
}
@@ -9335,7 +9342,7 @@
struct ipw_priv *priv = ieee80211_priv(dev);
int *parms = (int *)extra;
int enable = (parms[0] > 0);
- down(&priv->sem);
+ mutex_lock(&priv->mutex);
IPW_DEBUG_WX("SET MONITOR: %d %d\n", enable, parms[1]);
if (enable) {
if (priv->ieee->iw_mode != IW_MODE_MONITOR) {
@@ -9350,13 +9357,13 @@
ipw_set_channel(priv, parms[1]);
} else {
if (priv->ieee->iw_mode != IW_MODE_MONITOR) {
- up(&priv->sem);
+ mutex_unlock(&priv->mutex);
return 0;
}
priv->net_dev->type = ARPHRD_ETHER;
queue_work(priv->workqueue, &priv->adapter_restart);
}
- up(&priv->sem);
+ mutex_unlock(&priv->mutex);
return 0;
}
@@ -9386,7 +9393,7 @@
IPW_DEBUG_WX("SW_RESET\n");
- down(&priv->sem);
+ mutex_lock(&priv->mutex);
ret = ipw_sw_reset(priv, 0);
if (!ret) {
@@ -9398,9 +9405,9 @@
* module parameter, so take appropriate action */
ipw_radio_kill_sw(priv, priv->status & STATUS_RF_KILL_SW);
- up(&priv->sem);
+ mutex_unlock(&priv->mutex);
ieee80211_wx_set_encode(priv->ieee, info, &wrqu_sec, NULL);
- down(&priv->sem);
+ mutex_lock(&priv->mutex);
if (!(priv->status & STATUS_RF_KILL_MASK)) {
/* Configuration likely changed -- force [re]association */
@@ -9410,7 +9417,7 @@
ipw_associate(priv);
}
- up(&priv->sem);
+ mutex_unlock(&priv->mutex);
return 0;
}
@@ -9586,7 +9593,7 @@
static void init_sys_config(struct ipw_sys_config *sys_config)
{
memset(sys_config, 0, sizeof(struct ipw_sys_config));
- sys_config->bt_coexistence = 1; /* We may need to look into prvStaBtConfig */
+ sys_config->bt_coexistence = 0;
sys_config->answer_broadcast_ssid_probe = 0;
sys_config->accept_all_data_frames = 0;
sys_config->accept_non_directed_frames = 1;
@@ -9607,11 +9614,11 @@
struct ipw_priv *priv = ieee80211_priv(dev);
IPW_DEBUG_INFO("dev->open\n");
/* we should be verifying the device is ready to be opened */
- down(&priv->sem);
+ mutex_lock(&priv->mutex);
if (!(priv->status & STATUS_RF_KILL_MASK) &&
(priv->status & STATUS_ASSOCIATED))
netif_start_queue(dev);
- up(&priv->sem);
+ mutex_unlock(&priv->mutex);
return 0;
}
@@ -9890,13 +9897,13 @@
struct sockaddr *addr = p;
if (!is_valid_ether_addr(addr->sa_data))
return -EADDRNOTAVAIL;
- down(&priv->sem);
+ mutex_lock(&priv->mutex);
priv->config |= CFG_CUSTOM_MAC;
memcpy(priv->mac_addr, addr->sa_data, ETH_ALEN);
printk(KERN_INFO "%s: Setting MAC to " MAC_FMT "\n",
priv->net_dev->name, MAC_ARG(priv->mac_addr));
queue_work(priv->workqueue, &priv->adapter_restart);
- up(&priv->sem);
+ mutex_unlock(&priv->mutex);
return 0;
}
@@ -9940,9 +9947,9 @@
if (eeprom->offset + eeprom->len > IPW_EEPROM_IMAGE_SIZE)
return -EINVAL;
- down(&p->sem);
+ mutex_lock(&p->mutex);
memcpy(bytes, &p->eeprom[eeprom->offset], eeprom->len);
- up(&p->sem);
+ mutex_unlock(&p->mutex);
return 0;
}
@@ -9954,12 +9961,12 @@
if (eeprom->offset + eeprom->len > IPW_EEPROM_IMAGE_SIZE)
return -EINVAL;
- down(&p->sem);
+ mutex_lock(&p->mutex);
memcpy(&p->eeprom[eeprom->offset], bytes, eeprom->len);
for (i = IPW_EEPROM_DATA;
i < IPW_EEPROM_DATA + IPW_EEPROM_IMAGE_SIZE; i++)
ipw_write8(p, i, p->eeprom[i]);
- up(&p->sem);
+ mutex_unlock(&p->mutex);
return 0;
}
@@ -10054,12 +10061,12 @@
static void ipw_bg_rf_kill(void *data)
{
struct ipw_priv *priv = data;
- down(&priv->sem);
+ mutex_lock(&priv->mutex);
ipw_rf_kill(data);
- up(&priv->sem);
+ mutex_unlock(&priv->mutex);
}
-void ipw_link_up(struct ipw_priv *priv)
+static void ipw_link_up(struct ipw_priv *priv)
{
priv->last_seq_num = -1;
priv->last_frag_num = -1;
@@ -10089,12 +10096,12 @@
static void ipw_bg_link_up(void *data)
{
struct ipw_priv *priv = data;
- down(&priv->sem);
+ mutex_lock(&priv->mutex);
ipw_link_up(data);
- up(&priv->sem);
+ mutex_unlock(&priv->mutex);
}
-void ipw_link_down(struct ipw_priv *priv)
+static void ipw_link_down(struct ipw_priv *priv)
{
ipw_led_link_down(priv);
netif_carrier_off(priv->net_dev);
@@ -10117,9 +10124,9 @@
static void ipw_bg_link_down(void *data)
{
struct ipw_priv *priv = data;
- down(&priv->sem);
+ mutex_lock(&priv->mutex);
ipw_link_down(data);
- up(&priv->sem);
+ mutex_unlock(&priv->mutex);
}
static int ipw_setup_deferred_work(struct ipw_priv *priv)
@@ -10292,6 +10299,20 @@
/* set basic system config settings */
init_sys_config(&priv->sys_config);
+
+ /* Support Bluetooth if we have BT h/w on board, and user wants to.
+ * Does not support BT priority yet (don't abort or defer our Tx) */
+ if (bt_coexist) {
+ unsigned char bt_caps = priv->eeprom[EEPROM_SKU_CAPABILITY];
+
+ if (bt_caps & EEPROM_SKU_CAP_BT_CHANNEL_SIG)
+ priv->sys_config.bt_coexistence
+ |= CFG_BT_COEXISTENCE_SIGNAL_CHNL;
+ if (bt_caps & EEPROM_SKU_CAP_BT_OOB)
+ priv->sys_config.bt_coexistence
+ |= CFG_BT_COEXISTENCE_OOB;
+ }
+
if (priv->ieee->iw_mode == IW_MODE_ADHOC)
priv->sys_config.answer_broadcast_ssid_probe = 1;
else
@@ -10782,9 +10803,9 @@
static void ipw_bg_up(void *data)
{
struct ipw_priv *priv = data;
- down(&priv->sem);
+ mutex_lock(&priv->mutex);
ipw_up(data);
- up(&priv->sem);
+ mutex_unlock(&priv->mutex);
}
static void ipw_deinit(struct ipw_priv *priv)
@@ -10853,23 +10874,23 @@
static void ipw_bg_down(void *data)
{
struct ipw_priv *priv = data;
- down(&priv->sem);
+ mutex_lock(&priv->mutex);
ipw_down(data);
- up(&priv->sem);
+ mutex_unlock(&priv->mutex);
}
/* Called by register_netdev() */
static int ipw_net_init(struct net_device *dev)
{
struct ipw_priv *priv = ieee80211_priv(dev);
- down(&priv->sem);
+ mutex_lock(&priv->mutex);
if (ipw_up(priv)) {
- up(&priv->sem);
+ mutex_unlock(&priv->mutex);
return -EIO;
}
- up(&priv->sem);
+ mutex_unlock(&priv->mutex);
return 0;
}
@@ -10959,7 +10980,7 @@
for (i = 0; i < IPW_IBSS_MAC_HASH_SIZE; i++)
INIT_LIST_HEAD(&priv->ibss_mac_hash[i]);
- init_MUTEX(&priv->sem);
+ mutex_init(&priv->mutex);
if (pci_enable_device(pdev)) {
err = -ENODEV;
goto out_free_ieee80211;
@@ -11017,7 +11038,7 @@
SET_MODULE_OWNER(net_dev);
SET_NETDEV_DEV(net_dev, &pdev->dev);
- down(&priv->sem);
+ mutex_lock(&priv->mutex);
priv->ieee->hard_start_xmit = ipw_net_hard_start_xmit;
priv->ieee->set_security = shim__set_security;
@@ -11050,11 +11071,11 @@
err = sysfs_create_group(&pdev->dev.kobj, &ipw_attribute_group);
if (err) {
IPW_ERROR("failed to create sysfs device attributes\n");
- up(&priv->sem);
+ mutex_unlock(&priv->mutex);
goto out_release_irq;
}
- up(&priv->sem);
+ mutex_unlock(&priv->mutex);
err = register_netdev(net_dev);
if (err) {
IPW_ERROR("failed to register network device\n");
@@ -11091,13 +11112,13 @@
if (!priv)
return;
- down(&priv->sem);
+ mutex_lock(&priv->mutex);
priv->status |= STATUS_EXIT_PENDING;
ipw_down(priv);
sysfs_remove_group(&pdev->dev.kobj, &ipw_attribute_group);
- up(&priv->sem);
+ mutex_unlock(&priv->mutex);
unregister_netdev(priv->net_dev);
@@ -11281,12 +11302,18 @@
MODULE_PARM_DESC(mode, "network mode (0=BSS,1=IBSS)");
#endif
+module_param(bt_coexist, int, 0444);
+MODULE_PARM_DESC(bt_coexist, "enable bluetooth coexistence (default off)");
+
module_param(hwcrypto, int, 0444);
-MODULE_PARM_DESC(hwcrypto, "enable hardware crypto (default on)");
+MODULE_PARM_DESC(hwcrypto, "enable hardware crypto (default off)");
module_param(cmdlog, int, 0444);
MODULE_PARM_DESC(cmdlog,
"allocate a ring buffer for logging firmware commands");
+module_param(roaming, int, 0444);
+MODULE_PARM_DESC(roaming, "enable roaming support (default on)");
+
module_exit(ipw_exit);
module_init(ipw_init);
diff --git a/drivers/net/wireless/ipw2200.h b/drivers/net/wireless/ipw2200.h
index e65620a..5405ba1 100644
--- a/drivers/net/wireless/ipw2200.h
+++ b/drivers/net/wireless/ipw2200.h
@@ -33,6 +33,7 @@
#include <linux/moduleparam.h>
#include <linux/config.h>
#include <linux/init.h>
+#include <linux/mutex.h>
#include <linux/pci.h>
#include <linux/netdevice.h>
@@ -46,6 +47,7 @@
#include <linux/firmware.h>
#include <linux/wireless.h>
#include <linux/dma-mapping.h>
+#include <linux/jiffies.h>
#include <asm/io.h>
#include <net/ieee80211.h>
@@ -852,7 +854,7 @@
u16 dwell_time[IPW_SCAN_TYPES];
} __attribute__ ((packed));
-extern inline u8 ipw_get_scan_type(struct ipw_scan_request_ext *scan, u8 index)
+static inline u8 ipw_get_scan_type(struct ipw_scan_request_ext *scan, u8 index)
{
if (index % 2)
return scan->scan_type[index / 2] & 0x0F;
@@ -860,7 +862,7 @@
return (scan->scan_type[index / 2] & 0xF0) >> 4;
}
-extern inline void ipw_set_scan_type(struct ipw_scan_request_ext *scan,
+static inline void ipw_set_scan_type(struct ipw_scan_request_ext *scan,
u8 index, u8 scan_type)
{
if (index % 2)
@@ -1120,7 +1122,7 @@
struct ieee80211_device *ieee;
spinlock_t lock;
- struct semaphore sem;
+ struct mutex mutex;
/* basic pci-network driver stuff */
struct pci_dev *pci_dev;
@@ -1406,13 +1408,6 @@
* Register bit definitions
*/
-/* Dino control registers bits */
-
-#define DINO_ENABLE_SYSTEM 0x80
-#define DINO_ENABLE_CS 0x40
-#define DINO_RXFIFO_DATA 0x01
-#define DINO_CONTROL_REG 0x00200000
-
#define IPW_INTA_RW 0x00000008
#define IPW_INTA_MASK_R 0x0000000C
#define IPW_INDIRECT_ADDR 0x00000010
@@ -1459,6 +1454,11 @@
#define IPW_DOMAIN_0_END 0x1000
#define CLX_MEM_BAR_SIZE 0x1000
+/* Dino/baseband control registers bits */
+
+#define DINO_ENABLE_SYSTEM 0x80 /* 1 = baseband processor on, 0 = reset */
+#define DINO_ENABLE_CS 0x40 /* 1 = enable ucode load */
+#define DINO_RXFIFO_DATA 0x01 /* 1 = data available */
#define IPW_BASEBAND_CONTROL_STATUS 0X00200000
#define IPW_BASEBAND_TX_FIFO_WRITE 0X00200004
#define IPW_BASEBAND_RX_FIFO_READ 0X00200004
@@ -1567,13 +1567,18 @@
#define EEPROM_BSS_CHANNELS_BG (GET_EEPROM_ADDR(0x2c,LSB)) /* 2 bytes */
#define EEPROM_HW_VERSION (GET_EEPROM_ADDR(0x72,LSB)) /* 2 bytes */
-/* NIC type as found in the one byte EEPROM_NIC_TYPE offset*/
+/* NIC type as found in the one byte EEPROM_NIC_TYPE offset */
#define EEPROM_NIC_TYPE_0 0
#define EEPROM_NIC_TYPE_1 1
#define EEPROM_NIC_TYPE_2 2
#define EEPROM_NIC_TYPE_3 3
#define EEPROM_NIC_TYPE_4 4
+/* Bluetooth Coexistence capabilities as found in EEPROM_SKU_CAPABILITY */
+#define EEPROM_SKU_CAP_BT_CHANNEL_SIG 0x01 /* we can tell BT our channel # */
+#define EEPROM_SKU_CAP_BT_PRIORITY 0x02 /* BT can take priority over us */
+#define EEPROM_SKU_CAP_BT_OOB 0x04 /* we can signal BT out-of-band */
+
#define FW_MEM_REG_LOWER_BOUND 0x00300000
#define FW_MEM_REG_EEPROM_ACCESS (FW_MEM_REG_LOWER_BOUND + 0x40)
#define IPW_EVENT_REG (FW_MEM_REG_LOWER_BOUND + 0x04)
@@ -1658,9 +1663,10 @@
IPW_FW_ERROR_FATAL_ERROR
};
-#define AUTH_OPEN 0
-#define AUTH_SHARED_KEY 1
-#define AUTH_IGNORE 3
+#define AUTH_OPEN 0
+#define AUTH_SHARED_KEY 1
+#define AUTH_LEAP 2
+#define AUTH_IGNORE 3
#define HC_ASSOCIATE 0
#define HC_REASSOCIATE 1
@@ -1860,7 +1866,7 @@
u8 cmd;
u8 len;
u16 reserved;
- u32 param[TFD_CMD_IMMEDIATE_PAYLOAD_LENGTH];
+ u32 *param;
} __attribute__ ((packed));
struct ipw_cmd_log {
@@ -1869,21 +1875,23 @@
struct host_cmd cmd;
};
-#define CFG_BT_COEXISTENCE_MIN 0x00
-#define CFG_BT_COEXISTENCE_DEFER 0x02
-#define CFG_BT_COEXISTENCE_KILL 0x04
-#define CFG_BT_COEXISTENCE_WME_OVER_BT 0x08
-#define CFG_BT_COEXISTENCE_OOB 0x10
-#define CFG_BT_COEXISTENCE_MAX 0xFF
-#define CFG_BT_COEXISTENCE_DEF 0x80 /* read Bt from EEPROM */
+/* SysConfig command parameters ... */
+/* bt_coexistence param */
+#define CFG_BT_COEXISTENCE_SIGNAL_CHNL 0x01 /* tell BT our chnl # */
+#define CFG_BT_COEXISTENCE_DEFER 0x02 /* defer our Tx if BT traffic */
+#define CFG_BT_COEXISTENCE_KILL 0x04 /* kill our Tx if BT traffic */
+#define CFG_BT_COEXISTENCE_WME_OVER_BT 0x08 /* multimedia extensions */
+#define CFG_BT_COEXISTENCE_OOB 0x10 /* signal BT via out-of-band */
-#define CFG_CTS_TO_ITSELF_ENABLED_MIN 0x0
-#define CFG_CTS_TO_ITSELF_ENABLED_MAX 0x1
+/* clear-to-send to self param */
+#define CFG_CTS_TO_ITSELF_ENABLED_MIN 0x00
+#define CFG_CTS_TO_ITSELF_ENABLED_MAX 0x01
#define CFG_CTS_TO_ITSELF_ENABLED_DEF CFG_CTS_TO_ITSELF_ENABLED_MIN
-#define CFG_SYS_ANTENNA_BOTH 0x000
-#define CFG_SYS_ANTENNA_A 0x001
-#define CFG_SYS_ANTENNA_B 0x003
+/* Antenna diversity param (h/w can select best antenna, based on signal) */
+#define CFG_SYS_ANTENNA_BOTH 0x00 /* NIC selects best antenna */
+#define CFG_SYS_ANTENNA_A 0x01 /* force antenna A */
+#define CFG_SYS_ANTENNA_B 0x03 /* force antenna B */
/*
* The definitions below were lifted off the ipw2100 driver, which only
diff --git a/drivers/net/wireless/netwave_cs.c b/drivers/net/wireless/netwave_cs.c
index bf6271e..75ce6dd 100644
--- a/drivers/net/wireless/netwave_cs.c
+++ b/drivers/net/wireless/netwave_cs.c
@@ -55,10 +55,8 @@
#include <linux/etherdevice.h>
#include <linux/skbuff.h>
#include <linux/bitops.h>
-#ifdef CONFIG_NET_RADIO
#include <linux/wireless.h>
#include <net/iw_handler.h>
-#endif
#include <pcmcia/cs_types.h>
#include <pcmcia/cs.h>
diff --git a/drivers/net/wireless/strip.c b/drivers/net/wireless/strip.c
index 18baacf..18a4458 100644
--- a/drivers/net/wireless/strip.c
+++ b/drivers/net/wireless/strip.c
@@ -112,7 +112,7 @@
#include <linux/ip.h>
#include <linux/tcp.h>
#include <linux/time.h>
-
+#include <linux/jiffies.h>
/************************************************************************/
/* Useful structures and definitions */
@@ -1569,7 +1569,7 @@
del_timer(&strip_info->idle_timer);
- if (jiffies - strip_info->pps_timer > HZ) {
+ if (time_after(jiffies, strip_info->pps_timer + HZ)) {
unsigned long t = jiffies - strip_info->pps_timer;
unsigned long rx_pps_count = (strip_info->rx_pps_count * HZ * 8 + t / 2) / t;
unsigned long tx_pps_count = (strip_info->tx_pps_count * HZ * 8 + t / 2) / t;
diff --git a/drivers/net/wireless/wavelan.p.h b/drivers/net/wireless/wavelan.p.h
index 166e28b..5cb0bc8 100644
--- a/drivers/net/wireless/wavelan.p.h
+++ b/drivers/net/wireless/wavelan.p.h
@@ -98,11 +98,7 @@
* characteristics of the hardware. Applications such as mobile IP may
* take advantage of it.
*
- * You will need to enable the CONFIG_NET_RADIO define in the kernel
- * configuration to enable the wireless extensions (this is the one
- * giving access to the radio network device choice).
- *
- * It might also be a good idea as well to fetch the wireless tools to
+ * It might be a good idea as well to fetch the wireless tools to
* configure the device and play a bit.
*/
diff --git a/drivers/net/wireless/wavelan_cs.p.h b/drivers/net/wireless/wavelan_cs.p.h
index f2d5975..451f627 100644
--- a/drivers/net/wireless/wavelan_cs.p.h
+++ b/drivers/net/wireless/wavelan_cs.p.h
@@ -99,11 +99,7 @@
* caracteristics of the hardware in a standard way and support for
* applications for taking advantage of it (like Mobile IP).
*
- * You will need to enable the CONFIG_NET_RADIO define in the kernel
- * configuration to enable the wireless extensions (this is the one
- * giving access to the radio network device choice).
- *
- * It might also be a good idea as well to fetch the wireless tools to
+ * It might be a good idea as well to fetch the wireless tools to
* configure the device and play a bit.
*/
@@ -440,11 +436,8 @@
#include <linux/ioport.h>
#include <linux/fcntl.h>
#include <linux/ethtool.h>
-
-#ifdef CONFIG_NET_RADIO
#include <linux/wireless.h> /* Wireless extensions */
#include <net/iw_handler.h> /* New driver API */
-#endif
/* Pcmcia headers that we need */
#include <pcmcia/cs_types.h>
diff --git a/drivers/net/yellowfin.c b/drivers/net/yellowfin.c
index 1c25065..75d56bf 100644
--- a/drivers/net/yellowfin.c
+++ b/drivers/net/yellowfin.c
@@ -69,8 +69,8 @@
static int dma_ctrl = 0x00CAC277; /* Override when loading module! */
static int fifo_cfg = 0x0028;
#else
-static int dma_ctrl = 0x004A0263; /* Constrained by errata */
-static int fifo_cfg = 0x0020; /* Bypass external Tx FIFO. */
+static const int dma_ctrl = 0x004A0263; /* Constrained by errata */
+static const int fifo_cfg = 0x0020; /* Bypass external Tx FIFO. */
#endif
/* Set the copy breakpoint for the copy-only-tiny-frames scheme.
@@ -266,7 +266,7 @@
int drv_flags; /* Driver use, intended as capability flags. */
};
-static struct pci_id_info pci_id_tbl[] = {
+static const struct pci_id_info pci_id_tbl[] = {
{"Yellowfin G-NIC Gigabit Ethernet", { 0x07021000, 0xffffffff},
PCI_IOTYPE, YELLOWFIN_SIZE,
FullTxStatus | IsGigabit | HasMulticastBug | HasMACAddrBug | DontUseEeprom},
diff --git a/drivers/net/zorro8390.c b/drivers/net/zorro8390.c
index 8ab6e12..7610216 100644
--- a/drivers/net/zorro8390.c
+++ b/drivers/net/zorro8390.c
@@ -27,6 +27,7 @@
#include <linux/netdevice.h>
#include <linux/etherdevice.h>
#include <linux/zorro.h>
+#include <linux/jiffies.h>
#include <asm/system.h>
#include <asm/irq.h>
@@ -151,7 +152,7 @@
z_writeb(z_readb(ioaddr + NE_RESET), ioaddr + NE_RESET);
while ((z_readb(ioaddr + NE_EN0_ISR) & ENISR_RESET) == 0)
- if (jiffies - reset_start_time > 2*HZ/100) {
+ if (time_after(jiffies, reset_start_time + 2*HZ/100)) {
printk(KERN_WARNING " not found (no reset ack).\n");
return -ENODEV;
}
@@ -273,7 +274,7 @@
/* This check _should_not_ be necessary, omit eventually. */
while ((z_readb(NE_BASE+NE_EN0_ISR) & ENISR_RESET) == 0)
- if (jiffies - reset_start_time > 2*HZ/100) {
+ if (time_after(jiffies, reset_start_time + 2*HZ/100)) {
printk(KERN_WARNING "%s: ne_reset_8390() did not complete.\n",
dev->name);
break;
@@ -400,7 +401,7 @@
dma_start = jiffies;
while ((z_readb(NE_BASE + NE_EN0_ISR) & ENISR_RDC) == 0)
- if (jiffies - dma_start > 2*HZ/100) { /* 20ms */
+ if (time_after(jiffies, dma_start + 2*HZ/100)) { /* 20ms */
printk(KERN_ERR "%s: timeout waiting for Tx RDC.\n",
dev->name);
zorro8390_reset_8390(dev);
diff --git a/include/linux/arcdevice.h b/include/linux/arcdevice.h
index 7198f12..231ba09 100644
--- a/include/linux/arcdevice.h
+++ b/include/linux/arcdevice.h
@@ -206,7 +206,6 @@
extern struct ArcProto *arc_proto_map[256], *arc_proto_default,
*arc_bcast_proto, *arc_raw_proto;
-extern struct ArcProto arc_proto_null;
/*
@@ -334,17 +333,9 @@
#define arcnet_dump_skb(dev,skb,desc) ;
#endif
-#if (ARCNET_DEBUG_MAX & D_RX) || (ARCNET_DEBUG_MAX & D_TX)
-void arcnet_dump_packet(struct net_device *dev, int bufnum, char *desc,
- int take_arcnet_lock);
-#else
-#define arcnet_dump_packet(dev, bufnum, desc,take_arcnet_lock) ;
-#endif
-
void arcnet_unregister_proto(struct ArcProto *proto);
irqreturn_t arcnet_interrupt(int irq, void *dev_id, struct pt_regs *regs);
struct net_device *alloc_arcdev(char *name);
-void arcnet_rx(struct net_device *dev, int bufnum);
#endif /* __KERNEL__ */
#endif /* _LINUX_ARCDEVICE_H */
diff --git a/include/linux/if.h b/include/linux/if.h
index ce627d9..12c6f6d 100644
--- a/include/linux/if.h
+++ b/include/linux/if.h
@@ -52,6 +52,9 @@
/* Private (from user) interface flags (netdevice->priv_flags). */
#define IFF_802_1Q_VLAN 0x1 /* 802.1Q VLAN device. */
#define IFF_EBRIDGE 0x2 /* Ethernet bridging device. */
+#define IFF_SLAVE_INACTIVE 0x4 /* bonding slave not the curr. active */
+#define IFF_MASTER_8023AD 0x8 /* bonding master, 802.3ad. */
+#define IFF_MASTER_ALB 0x10 /* bonding master, balance-alb. */
#define IF_GET_IFACE 0x0001 /* for querying only */
#define IF_GET_PROTO 0x0002
diff --git a/include/linux/if_ether.h b/include/linux/if_ether.h
index 7a92c1c..ab08f35 100644
--- a/include/linux/if_ether.h
+++ b/include/linux/if_ether.h
@@ -61,6 +61,7 @@
#define ETH_P_8021Q 0x8100 /* 802.1Q VLAN Extended Header */
#define ETH_P_IPX 0x8137 /* IPX over DIX */
#define ETH_P_IPV6 0x86DD /* IPv6 over bluebook */
+#define ETH_P_SLOW 0x8809 /* Slow Protocol. See 802.3ad 43B */
#define ETH_P_WCCP 0x883E /* Web-cache coordination protocol
* defined in draft-wilson-wrec-wccp-v2-00.txt */
#define ETH_P_PPP_DISC 0x8863 /* PPPoE discovery messages */
diff --git a/include/linux/mv643xx.h b/include/linux/mv643xx.h
index 0b08cd6..955d306 100644
--- a/include/linux/mv643xx.h
+++ b/include/linux/mv643xx.h
@@ -1214,6 +1214,7 @@
#define MV643XX_ETH_FORCE_BP_MODE_NO_JAM 0
#define MV643XX_ETH_FORCE_BP_MODE_JAM_TX (1<<7)
#define MV643XX_ETH_FORCE_BP_MODE_JAM_TX_ON_RX_ERR (1<<8)
+#define MV643XX_ETH_SERIAL_PORT_CONTROL_RESERVED (1<<9)
#define MV643XX_ETH_FORCE_LINK_FAIL 0
#define MV643XX_ETH_DO_NOT_FORCE_LINK_FAIL (1<<10)
#define MV643XX_ETH_RETRANSMIT_16_ATTEMPTS 0
@@ -1243,6 +1244,8 @@
#define MV643XX_ETH_SET_MII_SPEED_TO_10 0
#define MV643XX_ETH_SET_MII_SPEED_TO_100 (1<<24)
+#define MV643XX_ETH_MAX_RX_PACKET_MASK (0x7<<17)
+
#define MV643XX_ETH_PORT_SERIAL_CONTROL_DEFAULT_VALUE \
MV643XX_ETH_DO_NOT_FORCE_LINK_PASS | \
MV643XX_ETH_ENABLE_AUTO_NEG_FOR_DUPLX | \
@@ -1285,23 +1288,15 @@
#define MV643XX_ETH_NAME "mv643xx_eth"
struct mv643xx_eth_platform_data {
- /*
- * Non-values for mac_addr, phy_addr, port_config, etc.
- * override the default value. Setting the corresponding
- * force_* field, causes the default value to be overridden
- * even when zero.
- */
- unsigned int force_phy_addr:1;
- unsigned int force_port_config:1;
- unsigned int force_port_config_extend:1;
- unsigned int force_port_sdma_config:1;
- unsigned int force_port_serial_control:1;
- int phy_addr;
char *mac_addr; /* pointer to mac address */
- u32 port_config;
- u32 port_config_extend;
- u32 port_sdma_config;
- u32 port_serial_control;
+ u16 force_phy_addr; /* force override if phy_addr == 0 */
+ u16 phy_addr;
+
+ /* If speed is 0, then speed and duplex are autonegotiated. */
+ int speed; /* 0, SPEED_10, SPEED_100, SPEED_1000 */
+ int duplex; /* DUPLEX_HALF or DUPLEX_FULL */
+
+ /* non-zero values of the following fields override defaults */
u32 tx_queue_size;
u32 rx_queue_size;
u32 tx_sram_addr;
diff --git a/include/net/ieee80211.h b/include/net/ieee80211.h
index 9a92aef..4725ff8 100644
--- a/include/net/ieee80211.h
+++ b/include/net/ieee80211.h
@@ -220,6 +220,7 @@
/* Authentication algorithms */
#define WLAN_AUTH_OPEN 0
#define WLAN_AUTH_SHARED_KEY 1
+#define WLAN_AUTH_LEAP 2
#define WLAN_AUTH_CHALLENGE_LEN 128
@@ -299,6 +300,23 @@
WLAN_REASON_CIPHER_SUITE_REJECTED = 24,
};
+/* Action categories - 802.11h */
+enum ieee80211_actioncategories {
+ WLAN_ACTION_SPECTRUM_MGMT = 0,
+ /* Reserved 1-127 */
+ /* Error 128-255 */
+};
+
+/* Action details - 802.11h */
+enum ieee80211_actiondetails {
+ WLAN_ACTION_CATEGORY_MEASURE_REQUEST = 0,
+ WLAN_ACTION_CATEGORY_MEASURE_REPORT = 1,
+ WLAN_ACTION_CATEGORY_TPC_REQUEST = 2,
+ WLAN_ACTION_CATEGORY_TPC_REPORT = 3,
+ WLAN_ACTION_CATEGORY_CHANNEL_SWITCH = 4,
+ /* 5 - 255 Reserved */
+};
+
#define IEEE80211_STATMASK_SIGNAL (1<<0)
#define IEEE80211_STATMASK_RSSI (1<<1)
#define IEEE80211_STATMASK_NOISE (1<<2)
@@ -377,6 +395,8 @@
u8 mask;
u8 freq;
u16 len;
+ u64 tsf;
+ u32 beacon_time;
};
/* IEEE 802.11 requires that STA supports concurrent reception of at least
@@ -608,6 +628,28 @@
struct ieee80211_info_element info_element[0];
} __attribute__ ((packed));
+struct ieee80211_channel_switch {
+ u8 id;
+ u8 len;
+ u8 mode;
+ u8 channel;
+ u8 count;
+} __attribute__ ((packed));
+
+struct ieee80211_action {
+ struct ieee80211_hdr_3addr header;
+ u8 category;
+ u8 action;
+ union {
+ struct ieee80211_action_exchange {
+ u8 token;
+ struct ieee80211_info_element info_element[0];
+ } exchange;
+ struct ieee80211_channel_switch channel_switch;
+
+ } format;
+} __attribute__ ((packed));
+
struct ieee80211_disassoc {
struct ieee80211_hdr_3addr header;
__le16 reason;
@@ -692,7 +734,15 @@
/* QoS structure */
#define NETWORK_HAS_QOS_PARAMETERS (1<<3)
#define NETWORK_HAS_QOS_INFORMATION (1<<4)
-#define NETWORK_HAS_QOS_MASK (NETWORK_HAS_QOS_PARAMETERS | NETWORK_HAS_QOS_INFORMATION)
+#define NETWORK_HAS_QOS_MASK (NETWORK_HAS_QOS_PARAMETERS | \
+ NETWORK_HAS_QOS_INFORMATION)
+
+/* 802.11h */
+#define NETWORK_HAS_POWER_CONSTRAINT (1<<5)
+#define NETWORK_HAS_CSA (1<<6)
+#define NETWORK_HAS_QUIET (1<<7)
+#define NETWORK_HAS_IBSS_DFS (1<<8)
+#define NETWORK_HAS_TPC_REPORT (1<<9)
#define QOS_QUEUE_NUM 4
#define QOS_OUI_LEN 3
@@ -748,6 +798,91 @@
/*******************************************************/
+enum { /* ieee80211_basic_report.map */
+ IEEE80211_BASIC_MAP_BSS = (1 << 0),
+ IEEE80211_BASIC_MAP_OFDM = (1 << 1),
+ IEEE80211_BASIC_MAP_UNIDENTIFIED = (1 << 2),
+ IEEE80211_BASIC_MAP_RADAR = (1 << 3),
+ IEEE80211_BASIC_MAP_UNMEASURED = (1 << 4),
+ /* Bits 5-7 are reserved */
+
+};
+struct ieee80211_basic_report {
+ u8 channel;
+ __le64 start_time;
+ __le16 duration;
+ u8 map;
+} __attribute__ ((packed));
+
+enum { /* ieee80211_measurement_request.mode */
+ /* Bit 0 is reserved */
+ IEEE80211_MEASUREMENT_ENABLE = (1 << 1),
+ IEEE80211_MEASUREMENT_REQUEST = (1 << 2),
+ IEEE80211_MEASUREMENT_REPORT = (1 << 3),
+ /* Bits 4-7 are reserved */
+};
+
+enum {
+ IEEE80211_REPORT_BASIC = 0, /* required */
+ IEEE80211_REPORT_CCA = 1, /* optional */
+ IEEE80211_REPORT_RPI = 2, /* optional */
+ /* 3-255 reserved */
+};
+
+struct ieee80211_measurement_params {
+ u8 channel;
+ __le64 start_time;
+ __le16 duration;
+} __attribute__ ((packed));
+
+struct ieee80211_measurement_request {
+ struct ieee80211_info_element ie;
+ u8 token;
+ u8 mode;
+ u8 type;
+ struct ieee80211_measurement_params params[0];
+} __attribute__ ((packed));
+
+struct ieee80211_measurement_report {
+ struct ieee80211_info_element ie;
+ u8 token;
+ u8 mode;
+ u8 type;
+ union {
+ struct ieee80211_basic_report basic[0];
+ } u;
+} __attribute__ ((packed));
+
+struct ieee80211_tpc_report {
+ u8 transmit_power;
+ u8 link_margin;
+} __attribute__ ((packed));
+
+struct ieee80211_channel_map {
+ u8 channel;
+ u8 map;
+} __attribute__ ((packed));
+
+struct ieee80211_ibss_dfs {
+ struct ieee80211_info_element ie;
+ u8 owner[ETH_ALEN];
+ u8 recovery_interval;
+ struct ieee80211_channel_map channel_map[0];
+};
+
+struct ieee80211_csa {
+ u8 mode;
+ u8 channel;
+ u8 count;
+} __attribute__ ((packed));
+
+struct ieee80211_quiet {
+ u8 count;
+ u8 period;
+ u8 duration;
+ u8 offset;
+} __attribute__ ((packed));
+
struct ieee80211_network {
/* These entries are used to identify a unique network */
u8 bssid[ETH_ALEN];
@@ -767,7 +902,7 @@
u8 rates_ex_len;
unsigned long last_scanned;
u8 mode;
- u8 flags;
+ u32 flags;
u32 last_associate;
u32 time_stamp[2];
u16 beacon_interval;
@@ -779,6 +914,25 @@
u8 rsn_ie[MAX_WPA_IE_LEN];
size_t rsn_ie_len;
struct ieee80211_tim_parameters tim;
+
+ /* 802.11h info */
+
+ /* Power Constraint - mandatory if spctrm mgmt required */
+ u8 power_constraint;
+
+ /* TPC Report - mandatory if spctrm mgmt required */
+ struct ieee80211_tpc_report tpc_report;
+
+ /* IBSS DFS - mandatory if spctrm mgmt required and IBSS
+ * NOTE: This is variable length and so must be allocated dynamically */
+ struct ieee80211_ibss_dfs *ibss_dfs;
+
+ /* Channel Switch Announcement - optional if spctrm mgmt required */
+ struct ieee80211_csa csa;
+
+ /* Quiet - optional if spctrm mgmt required */
+ struct ieee80211_quiet quiet;
+
struct list_head list;
};
@@ -924,7 +1078,10 @@
int (*handle_auth) (struct net_device * dev,
struct ieee80211_auth * auth);
int (*handle_deauth) (struct net_device * dev,
- struct ieee80211_auth * auth);
+ struct ieee80211_deauth * auth);
+ int (*handle_action) (struct net_device * dev,
+ struct ieee80211_action * action,
+ struct ieee80211_rx_stats * stats);
int (*handle_disassoc) (struct net_device * dev,
struct ieee80211_disassoc * assoc);
int (*handle_beacon) (struct net_device * dev,
@@ -1093,6 +1250,7 @@
extern void ieee80211_rx_mgt(struct ieee80211_device *ieee,
struct ieee80211_hdr_4addr *header,
struct ieee80211_rx_stats *stats);
+extern void ieee80211_network_reset(struct ieee80211_network *network);
/* ieee80211_geo.c */
extern const struct ieee80211_geo *ieee80211_get_geo(struct ieee80211_device
@@ -1105,6 +1263,11 @@
extern int ieee80211_channel_to_index(struct ieee80211_device *ieee,
u8 channel);
extern u8 ieee80211_freq_to_channel(struct ieee80211_device *ieee, u32 freq);
+extern u8 ieee80211_get_channel_flags(struct ieee80211_device *ieee,
+ u8 channel);
+extern const struct ieee80211_channel *ieee80211_get_channel(struct
+ ieee80211_device
+ *ieee, u8 channel);
/* ieee80211_wx.c */
extern int ieee80211_wx_get_scan(struct ieee80211_device *ieee,
@@ -1122,6 +1285,14 @@
extern int ieee80211_wx_get_encodeext(struct ieee80211_device *ieee,
struct iw_request_info *info,
union iwreq_data *wrqu, char *extra);
+extern int ieee80211_wx_set_auth(struct net_device *dev,
+ struct iw_request_info *info,
+ union iwreq_data *wrqu,
+ char *extra);
+extern int ieee80211_wx_get_auth(struct net_device *dev,
+ struct iw_request_info *info,
+ union iwreq_data *wrqu,
+ char *extra);
static inline void ieee80211_increment_scans(struct ieee80211_device *ieee)
{
diff --git a/include/net/ieee80211_crypt.h b/include/net/ieee80211_crypt.h
index cd82c3e..eb476414 100644
--- a/include/net/ieee80211_crypt.h
+++ b/include/net/ieee80211_crypt.h
@@ -47,7 +47,8 @@
/* deinitialize crypto context and free allocated private data */
void (*deinit) (void *priv);
- int (*build_iv) (struct sk_buff * skb, int hdr_len, void *priv);
+ int (*build_iv) (struct sk_buff * skb, int hdr_len,
+ u8 *key, int keylen, void *priv);
/* encrypt/decrypt return < 0 on error or >= 0 on success. The return
* value from decrypt_mpdu is passed as the keyidx value for
diff --git a/net/Kconfig b/net/Kconfig
index 5126f58..4193cdc 100644
--- a/net/Kconfig
+++ b/net/Kconfig
@@ -224,6 +224,9 @@
source "net/bluetooth/Kconfig"
source "net/ieee80211/Kconfig"
+config WIRELESS_EXT
+ bool
+
endif # if NET
endmenu # Networking
diff --git a/net/core/Makefile b/net/core/Makefile
index 630da0f..79fe12c 100644
--- a/net/core/Makefile
+++ b/net/core/Makefile
@@ -14,5 +14,5 @@
obj-$(CONFIG_SYSFS) += net-sysfs.o
obj-$(CONFIG_NET_DIVERT) += dv.o
obj-$(CONFIG_NET_PKTGEN) += pktgen.o
-obj-$(CONFIG_NET_RADIO) += wireless.o
+obj-$(CONFIG_WIRELESS_EXT) += wireless.o
obj-$(CONFIG_NETPOLL) += netpoll.o
diff --git a/net/core/dev.c b/net/core/dev.c
index 2afb0de..ef56c035 100644
--- a/net/core/dev.c
+++ b/net/core/dev.c
@@ -110,10 +110,8 @@
#include <linux/netpoll.h>
#include <linux/rcupdate.h>
#include <linux/delay.h>
-#ifdef CONFIG_NET_RADIO
-#include <linux/wireless.h> /* Note : will define WIRELESS_EXT */
+#include <linux/wireless.h>
#include <net/iw_handler.h>
-#endif /* CONFIG_NET_RADIO */
#include <asm/current.h>
/*
@@ -1448,8 +1446,29 @@
{
struct net_device *dev = skb->dev;
- if (dev->master)
+ if (dev->master) {
+ /*
+ * On bonding slaves other than the currently active
+ * slave, suppress duplicates except for 802.3ad
+ * ETH_P_SLOW and alb non-mcast/bcast.
+ */
+ if (dev->priv_flags & IFF_SLAVE_INACTIVE) {
+ if (dev->master->priv_flags & IFF_MASTER_ALB) {
+ if (skb->pkt_type != PACKET_BROADCAST &&
+ skb->pkt_type != PACKET_MULTICAST)
+ goto keep;
+ }
+
+ if (dev->master->priv_flags & IFF_MASTER_8023AD &&
+ skb->protocol == __constant_htons(ETH_P_SLOW))
+ goto keep;
+
+ kfree_skb(skb);
+ return NULL;
+ }
+keep:
skb->dev = dev->master;
+ }
return dev;
}
@@ -1593,6 +1612,9 @@
orig_dev = skb_bond(skb);
+ if (!orig_dev)
+ return NET_RX_DROP;
+
__get_cpu_var(netdev_rx_stat).total++;
skb->h.raw = skb->nh.raw = skb->data;
@@ -2028,7 +2050,7 @@
.release = seq_release,
};
-#ifdef WIRELESS_EXT
+#ifdef CONFIG_WIRELESS_EXT
extern int wireless_proc_init(void);
#else
#define wireless_proc_init() 0
@@ -2582,7 +2604,7 @@
ret = -EFAULT;
return ret;
}
-#ifdef WIRELESS_EXT
+#ifdef CONFIG_WIRELESS_EXT
/* Take care of Wireless Extensions */
if (cmd >= SIOCIWFIRST && cmd <= SIOCIWLAST) {
/* If command is `set a parameter', or
@@ -2603,7 +2625,7 @@
ret = -EFAULT;
return ret;
}
-#endif /* WIRELESS_EXT */
+#endif /* CONFIG_WIRELESS_EXT */
return -EINVAL;
}
}
diff --git a/net/ieee80211/ieee80211_crypt.c b/net/ieee80211/ieee80211_crypt.c
index ecc9bb1..cb71d79 100644
--- a/net/ieee80211/ieee80211_crypt.c
+++ b/net/ieee80211/ieee80211_crypt.c
@@ -18,7 +18,6 @@
#include <linux/string.h>
#include <net/ieee80211.h>
-
MODULE_AUTHOR("Jouni Malinen");
MODULE_DESCRIPTION("HostAP crypto");
MODULE_LICENSE("GPL");
@@ -33,11 +32,11 @@
void ieee80211_crypt_deinit_entries(struct ieee80211_device *ieee, int force)
{
- struct ieee80211_crypt_data *entry, *next;
+ struct ieee80211_crypt_data *entry, *next;
unsigned long flags;
spin_lock_irqsave(&ieee->lock, flags);
- list_for_each_entry_safe(entry, next, &ieee->crypt_deinit_list, list) {
+ list_for_each_entry_safe(entry, next, &ieee->crypt_deinit_list, list) {
if (atomic_read(&entry->refcnt) != 0 && !force)
continue;
@@ -141,9 +140,9 @@
spin_unlock_irqrestore(&ieee80211_crypto_lock, flags);
return -EINVAL;
- found:
+ found:
printk(KERN_DEBUG "ieee80211_crypt: unregistered algorithm "
- "'%s'\n", ops->name);
+ "'%s'\n", ops->name);
list_del(&alg->list);
spin_unlock_irqrestore(&ieee80211_crypto_lock, flags);
kfree(alg);
@@ -163,7 +162,7 @@
spin_unlock_irqrestore(&ieee80211_crypto_lock, flags);
return NULL;
- found:
+ found:
spin_unlock_irqrestore(&ieee80211_crypto_lock, flags);
return alg->ops;
}
diff --git a/net/ieee80211/ieee80211_crypt_ccmp.c b/net/ieee80211/ieee80211_crypt_ccmp.c
index 4702217..097bcea 100644
--- a/net/ieee80211/ieee80211_crypt_ccmp.c
+++ b/net/ieee80211/ieee80211_crypt_ccmp.c
@@ -190,7 +190,8 @@
ieee80211_ccmp_aes_encrypt(tfm, b0, s0);
}
-static int ieee80211_ccmp_hdr(struct sk_buff *skb, int hdr_len, void *priv)
+static int ieee80211_ccmp_hdr(struct sk_buff *skb, int hdr_len,
+ u8 *aeskey, int keylen, void *priv)
{
struct ieee80211_ccmp_data *key = priv;
int i;
@@ -199,6 +200,9 @@
if (skb_headroom(skb) < CCMP_HDR_LEN || skb->len < hdr_len)
return -1;
+ if (aeskey != NULL && keylen >= CCMP_TK_LEN)
+ memcpy(aeskey, key->key, CCMP_TK_LEN);
+
pos = skb_push(skb, CCMP_HDR_LEN);
memmove(pos, pos + CCMP_HDR_LEN, hdr_len);
pos += hdr_len;
@@ -238,7 +242,7 @@
return -1;
data_len = skb->len - hdr_len;
- len = ieee80211_ccmp_hdr(skb, hdr_len, priv);
+ len = ieee80211_ccmp_hdr(skb, hdr_len, NULL, 0, priv);
if (len < 0)
return -1;
diff --git a/net/ieee80211/ieee80211_crypt_tkip.c b/net/ieee80211/ieee80211_crypt_tkip.c
index e098832..93def94 100644
--- a/net/ieee80211/ieee80211_crypt_tkip.c
+++ b/net/ieee80211/ieee80211_crypt_tkip.c
@@ -80,10 +80,9 @@
{
struct ieee80211_tkip_data *priv;
- priv = kmalloc(sizeof(*priv), GFP_ATOMIC);
+ priv = kzalloc(sizeof(*priv), GFP_ATOMIC);
if (priv == NULL)
goto fail;
- memset(priv, 0, sizeof(*priv));
priv->key_idx = key_idx;
@@ -271,34 +270,33 @@
#endif
}
-static u8 *ieee80211_tkip_hdr(struct sk_buff *skb, int hdr_len, void *priv)
+static int ieee80211_tkip_hdr(struct sk_buff *skb, int hdr_len,
+ u8 * rc4key, int keylen, void *priv)
{
struct ieee80211_tkip_data *tkey = priv;
int len;
- u8 *rc4key, *pos, *icv;
+ u8 *pos;
struct ieee80211_hdr_4addr *hdr;
- u32 crc;
hdr = (struct ieee80211_hdr_4addr *)skb->data;
if (skb_headroom(skb) < 8 || skb->len < hdr_len)
- return NULL;
+ return -1;
+
+ if (rc4key == NULL || keylen < 16)
+ return -1;
if (!tkey->tx_phase1_done) {
tkip_mixing_phase1(tkey->tx_ttak, tkey->key, hdr->addr2,
tkey->tx_iv32);
tkey->tx_phase1_done = 1;
}
- rc4key = kmalloc(16, GFP_ATOMIC);
- if (!rc4key)
- return NULL;
tkip_mixing_phase2(rc4key, tkey->key, tkey->tx_ttak, tkey->tx_iv16);
len = skb->len - hdr_len;
pos = skb_push(skb, 8);
memmove(pos, pos + 8, hdr_len);
pos += hdr_len;
- icv = skb_put(skb, 4);
*pos++ = *rc4key;
*pos++ = *(rc4key + 1);
@@ -309,28 +307,28 @@
*pos++ = (tkey->tx_iv32 >> 16) & 0xff;
*pos++ = (tkey->tx_iv32 >> 24) & 0xff;
- crc = ~crc32_le(~0, pos, len);
- icv[0] = crc;
- icv[1] = crc >> 8;
- icv[2] = crc >> 16;
- icv[3] = crc >> 24;
+ tkey->tx_iv16++;
+ if (tkey->tx_iv16 == 0) {
+ tkey->tx_phase1_done = 0;
+ tkey->tx_iv32++;
+ }
- return rc4key;
+ return 8;
}
static int ieee80211_tkip_encrypt(struct sk_buff *skb, int hdr_len, void *priv)
{
struct ieee80211_tkip_data *tkey = priv;
int len;
- const u8 *rc4key;
- u8 *pos;
+ u8 rc4key[16], *pos, *icv;
+ u32 crc;
struct scatterlist sg;
if (tkey->flags & IEEE80211_CRYPTO_TKIP_COUNTERMEASURES) {
if (net_ratelimit()) {
struct ieee80211_hdr_4addr *hdr =
(struct ieee80211_hdr_4addr *)skb->data;
- printk(KERN_DEBUG "TKIP countermeasures: dropped "
+ printk(KERN_DEBUG ": TKIP countermeasures: dropped "
"TX packet to " MAC_FMT "\n",
MAC_ARG(hdr->addr1));
}
@@ -343,22 +341,23 @@
len = skb->len - hdr_len;
pos = skb->data + hdr_len;
- rc4key = ieee80211_tkip_hdr(skb, hdr_len, priv);
- if (!rc4key)
+ if ((ieee80211_tkip_hdr(skb, hdr_len, rc4key, 16, priv)) < 0)
return -1;
+ icv = skb_put(skb, 4);
+
+ crc = ~crc32_le(~0, pos, len);
+ icv[0] = crc;
+ icv[1] = crc >> 8;
+ icv[2] = crc >> 16;
+ icv[3] = crc >> 24;
+
crypto_cipher_setkey(tkey->tfm_arc4, rc4key, 16);
sg.page = virt_to_page(pos);
sg.offset = offset_in_page(pos);
sg.length = len + 4;
crypto_cipher_encrypt(tkey->tfm_arc4, &sg, &sg, len + 4);
- tkey->tx_iv16++;
- if (tkey->tx_iv16 == 0) {
- tkey->tx_phase1_done = 0;
- tkey->tx_iv32++;
- }
-
return 0;
}
@@ -379,7 +378,7 @@
if (tkey->flags & IEEE80211_CRYPTO_TKIP_COUNTERMEASURES) {
if (net_ratelimit()) {
- printk(KERN_DEBUG "TKIP countermeasures: dropped "
+ printk(KERN_DEBUG ": TKIP countermeasures: dropped "
"received packet from " MAC_FMT "\n",
MAC_ARG(hdr->addr2));
}
@@ -695,6 +694,7 @@
.name = "TKIP",
.init = ieee80211_tkip_init,
.deinit = ieee80211_tkip_deinit,
+ .build_iv = ieee80211_tkip_hdr,
.encrypt_mpdu = ieee80211_tkip_encrypt,
.decrypt_mpdu = ieee80211_tkip_decrypt,
.encrypt_msdu = ieee80211_michael_mic_add,
diff --git a/net/ieee80211/ieee80211_crypt_wep.c b/net/ieee80211/ieee80211_crypt_wep.c
index f8dca31..649e581 100644
--- a/net/ieee80211/ieee80211_crypt_wep.c
+++ b/net/ieee80211/ieee80211_crypt_wep.c
@@ -76,7 +76,8 @@
}
/* Add WEP IV/key info to a frame that has at least 4 bytes of headroom */
-static int prism2_wep_build_iv(struct sk_buff *skb, int hdr_len, void *priv)
+static int prism2_wep_build_iv(struct sk_buff *skb, int hdr_len,
+ u8 *key, int keylen, void *priv)
{
struct prism2_wep_data *wep = priv;
u32 klen, len;
@@ -131,7 +132,7 @@
return -1;
/* add the IV to the frame */
- if (prism2_wep_build_iv(skb, hdr_len, priv))
+ if (prism2_wep_build_iv(skb, hdr_len, NULL, 0, priv))
return -1;
/* Copy the IV into the first 3 bytes of the key */
diff --git a/net/ieee80211/ieee80211_geo.c b/net/ieee80211/ieee80211_geo.c
index 610cc5c..192243a 100644
--- a/net/ieee80211/ieee80211_geo.c
+++ b/net/ieee80211/ieee80211_geo.c
@@ -50,7 +50,8 @@
/* Driver needs to initialize the geography map before using
* these helper functions */
- BUG_ON(ieee->geo.bg_channels == 0 && ieee->geo.a_channels == 0);
+ if (ieee->geo.bg_channels == 0 && ieee->geo.a_channels == 0)
+ return 0;
if (ieee->freq_band & IEEE80211_24GHZ_BAND)
for (i = 0; i < ieee->geo.bg_channels; i++)
@@ -58,13 +59,15 @@
* this is a B only channel, we don't see it
* as valid. */
if ((ieee->geo.bg[i].channel == channel) &&
+ !(ieee->geo.bg[i].flags & IEEE80211_CH_INVALID) &&
(!(ieee->mode & IEEE_G) ||
!(ieee->geo.bg[i].flags & IEEE80211_CH_B_ONLY)))
return IEEE80211_24GHZ_BAND;
if (ieee->freq_band & IEEE80211_52GHZ_BAND)
for (i = 0; i < ieee->geo.a_channels; i++)
- if (ieee->geo.a[i].channel == channel)
+ if ((ieee->geo.a[i].channel == channel) &&
+ !(ieee->geo.a[i].flags & IEEE80211_CH_INVALID))
return IEEE80211_52GHZ_BAND;
return 0;
@@ -76,7 +79,8 @@
/* Driver needs to initialize the geography map before using
* these helper functions */
- BUG_ON(ieee->geo.bg_channels == 0 && ieee->geo.a_channels == 0);
+ if (ieee->geo.bg_channels == 0 && ieee->geo.a_channels == 0)
+ return -1;
if (ieee->freq_band & IEEE80211_24GHZ_BAND)
for (i = 0; i < ieee->geo.bg_channels; i++)
@@ -97,7 +101,8 @@
/* Driver needs to initialize the geography map before using
* these helper functions */
- BUG_ON(ieee->geo.bg_channels == 0 && ieee->geo.a_channels == 0);
+ if (ieee->geo.bg_channels == 0 && ieee->geo.a_channels == 0)
+ return 0;
freq /= 100000;
@@ -133,6 +138,41 @@
return &ieee->geo;
}
+u8 ieee80211_get_channel_flags(struct ieee80211_device * ieee, u8 channel)
+{
+ int index = ieee80211_channel_to_index(ieee, channel);
+
+ if (index == -1)
+ return IEEE80211_CH_INVALID;
+
+ if (channel <= IEEE80211_24GHZ_CHANNELS)
+ return ieee->geo.bg[index].flags;
+
+ return ieee->geo.a[index].flags;
+}
+
+static const struct ieee80211_channel bad_channel = {
+ .channel = 0,
+ .flags = IEEE80211_CH_INVALID,
+ .max_power = 0,
+};
+
+const struct ieee80211_channel *ieee80211_get_channel(struct ieee80211_device
+ *ieee, u8 channel)
+{
+ int index = ieee80211_channel_to_index(ieee, channel);
+
+ if (index == -1)
+ return &bad_channel;
+
+ if (channel <= IEEE80211_24GHZ_CHANNELS)
+ return &ieee->geo.bg[index];
+
+ return &ieee->geo.a[index];
+}
+
+EXPORT_SYMBOL(ieee80211_get_channel);
+EXPORT_SYMBOL(ieee80211_get_channel_flags);
EXPORT_SYMBOL(ieee80211_is_valid_channel);
EXPORT_SYMBOL(ieee80211_freq_to_channel);
EXPORT_SYMBOL(ieee80211_channel_to_index);
diff --git a/net/ieee80211/ieee80211_module.c b/net/ieee80211/ieee80211_module.c
index 90d18b7..2cb84d8 100644
--- a/net/ieee80211/ieee80211_module.c
+++ b/net/ieee80211/ieee80211_module.c
@@ -82,10 +82,28 @@
return 0;
}
+void ieee80211_network_reset(struct ieee80211_network *network)
+{
+ if (!network)
+ return;
+
+ if (network->ibss_dfs) {
+ kfree(network->ibss_dfs);
+ network->ibss_dfs = NULL;
+ }
+}
+
static inline void ieee80211_networks_free(struct ieee80211_device *ieee)
{
+ int i;
+
if (!ieee->networks)
return;
+
+ for (i = 0; i < MAX_NETWORK_COUNT; i++)
+ if (ieee->networks[i].ibss_dfs)
+ kfree(ieee->networks[i].ibss_dfs);
+
kfree(ieee->networks);
ieee->networks = NULL;
}
@@ -195,7 +213,7 @@
static int debug = 0;
u32 ieee80211_debug_level = 0;
-struct proc_dir_entry *ieee80211_proc = NULL;
+static struct proc_dir_entry *ieee80211_proc = NULL;
static int show_debug_level(char *page, char **start, off_t offset,
int count, int *eof, void *data)
diff --git a/net/ieee80211/ieee80211_rx.c b/net/ieee80211/ieee80211_rx.c
index b410ab8..6b8469d 100644
--- a/net/ieee80211/ieee80211_rx.c
+++ b/net/ieee80211/ieee80211_rx.c
@@ -369,8 +369,8 @@
/* Put this code here so that we avoid duplicating it in all
* Rx paths. - Jean II */
+#ifdef CONFIG_WIRELESS_EXT
#ifdef IW_WIRELESS_SPY /* defined in iw_handler.h */
-#ifdef CONFIG_NET_RADIO
/* If spy monitoring on */
if (ieee->spy_data.spy_number > 0) {
struct iw_quality wstats;
@@ -397,8 +397,8 @@
/* Update spy records */
wireless_spy_update(ieee->dev, hdr->addr2, &wstats);
}
-#endif /* CONFIG_NET_RADIO */
#endif /* IW_WIRELESS_SPY */
+#endif /* CONFIG_WIRELESS_EXT */
#ifdef NOT_YET
hostap_update_rx_stats(local->ap, hdr, rx_stats);
@@ -574,7 +574,7 @@
/* skb: hdr + (possibly fragmented) plaintext payload */
// PR: FIXME: hostap has additional conditions in the "if" below:
// ieee->host_decrypt && (fc & IEEE80211_FCTL_PROTECTED) &&
- if ((frag != 0 || (fc & IEEE80211_FCTL_MOREFRAGS))) {
+ if ((frag != 0) || (fc & IEEE80211_FCTL_MOREFRAGS)) {
int flen;
struct sk_buff *frag_skb = ieee80211_frag_cache_get(ieee, hdr);
IEEE80211_DEBUG_FRAG("Rx Fragment received (%u)\n", frag);
@@ -754,7 +754,14 @@
memset(skb->cb, 0, sizeof(skb->cb));
skb->dev = dev;
skb->ip_summed = CHECKSUM_NONE; /* 802.11 crc not sufficient */
- netif_rx(skb);
+ if (netif_rx(skb) == NET_RX_DROP) {
+ /* netif_rx always succeeds, but it might drop
+ * the packet. If it drops the packet, we log that
+ * in our stats. */
+ IEEE80211_DEBUG_DROP
+ ("RX: netif_rx dropped the packet\n");
+ stats->rx_dropped++;
+ }
}
rx_exit:
@@ -930,6 +937,45 @@
return rc;
}
+#ifdef CONFIG_IEEE80211_DEBUG
+#define MFIE_STRING(x) case MFIE_TYPE_ ##x: return #x
+
+static const char *get_info_element_string(u16 id)
+{
+ switch (id) {
+ MFIE_STRING(SSID);
+ MFIE_STRING(RATES);
+ MFIE_STRING(FH_SET);
+ MFIE_STRING(DS_SET);
+ MFIE_STRING(CF_SET);
+ MFIE_STRING(TIM);
+ MFIE_STRING(IBSS_SET);
+ MFIE_STRING(COUNTRY);
+ MFIE_STRING(HOP_PARAMS);
+ MFIE_STRING(HOP_TABLE);
+ MFIE_STRING(REQUEST);
+ MFIE_STRING(CHALLENGE);
+ MFIE_STRING(POWER_CONSTRAINT);
+ MFIE_STRING(POWER_CAPABILITY);
+ MFIE_STRING(TPC_REQUEST);
+ MFIE_STRING(TPC_REPORT);
+ MFIE_STRING(SUPP_CHANNELS);
+ MFIE_STRING(CSA);
+ MFIE_STRING(MEASURE_REQUEST);
+ MFIE_STRING(MEASURE_REPORT);
+ MFIE_STRING(QUIET);
+ MFIE_STRING(IBSS_DFS);
+ MFIE_STRING(ERP_INFO);
+ MFIE_STRING(RSN);
+ MFIE_STRING(RATES_EX);
+ MFIE_STRING(GENERIC);
+ MFIE_STRING(QOS_PARAMETER);
+ default:
+ return "UNKNOWN";
+ }
+}
+#endif
+
static int ieee80211_parse_info_param(struct ieee80211_info_element
*info_element, u16 length,
struct ieee80211_network *network)
@@ -1040,7 +1086,9 @@
break;
case MFIE_TYPE_TIM:
- IEEE80211_DEBUG_MGMT("MFIE_TYPE_TIM: ignored\n");
+ network->tim.tim_count = info_element->data[0];
+ network->tim.tim_period = info_element->data[1];
+ IEEE80211_DEBUG_MGMT("MFIE_TYPE_TIM: partially ignored\n");
break;
case MFIE_TYPE_ERP_INFO:
@@ -1091,10 +1139,49 @@
printk(KERN_ERR
"QoS Error need to parse QOS_PARAMETER IE\n");
break;
+ /* 802.11h */
+ case MFIE_TYPE_POWER_CONSTRAINT:
+ network->power_constraint = info_element->data[0];
+ network->flags |= NETWORK_HAS_POWER_CONSTRAINT;
+ break;
+
+ case MFIE_TYPE_CSA:
+ network->power_constraint = info_element->data[0];
+ network->flags |= NETWORK_HAS_CSA;
+ break;
+
+ case MFIE_TYPE_QUIET:
+ network->quiet.count = info_element->data[0];
+ network->quiet.period = info_element->data[1];
+ network->quiet.duration = info_element->data[2];
+ network->quiet.offset = info_element->data[3];
+ network->flags |= NETWORK_HAS_QUIET;
+ break;
+
+ case MFIE_TYPE_IBSS_DFS:
+ if (network->ibss_dfs)
+ break;
+ network->ibss_dfs =
+ kmalloc(info_element->len, GFP_ATOMIC);
+ if (!network->ibss_dfs)
+ return 1;
+ memcpy(network->ibss_dfs, info_element->data,
+ info_element->len);
+ network->flags |= NETWORK_HAS_IBSS_DFS;
+ break;
+
+ case MFIE_TYPE_TPC_REPORT:
+ network->tpc_report.transmit_power =
+ info_element->data[0];
+ network->tpc_report.link_margin = info_element->data[1];
+ network->flags |= NETWORK_HAS_TPC_REPORT;
+ break;
default:
- IEEE80211_DEBUG_MGMT("unsupported IE %d\n",
- info_element->id);
+ IEEE80211_DEBUG_MGMT
+ ("Unsupported info element: %s (%d)\n",
+ get_info_element_string(info_element->id),
+ info_element->id);
break;
}
@@ -1110,7 +1197,9 @@
static int ieee80211_handle_assoc_resp(struct ieee80211_device *ieee, struct ieee80211_assoc_response
*frame, struct ieee80211_rx_stats *stats)
{
- struct ieee80211_network network_resp;
+ struct ieee80211_network network_resp = {
+ .ibss_dfs = NULL,
+ };
struct ieee80211_network *network = &network_resp;
struct net_device *dev = ieee->dev;
@@ -1253,6 +1342,9 @@
int qos_active;
u8 old_param;
+ ieee80211_network_reset(dst);
+ dst->ibss_dfs = src->ibss_dfs;
+
memcpy(&dst->stats, &src->stats, sizeof(struct ieee80211_rx_stats));
dst->capability = src->capability;
memcpy(dst->rates, src->rates, src->rates_len);
@@ -1269,6 +1361,7 @@
dst->listen_interval = src->listen_interval;
dst->atim_window = src->atim_window;
dst->erp_value = src->erp_value;
+ dst->tim = src->tim;
memcpy(dst->wpa_ie, src->wpa_ie, src->wpa_ie_len);
dst->wpa_ie_len = src->wpa_ie_len;
@@ -1313,7 +1406,9 @@
*stats)
{
struct net_device *dev = ieee->dev;
- struct ieee80211_network network;
+ struct ieee80211_network network = {
+ .ibss_dfs = NULL,
+ };
struct ieee80211_network *target;
struct ieee80211_network *oldest = NULL;
#ifdef CONFIG_IEEE80211_DEBUG
@@ -1386,6 +1481,7 @@
escape_essid(target->ssid,
target->ssid_len),
MAC_ARG(target->bssid));
+ ieee80211_network_reset(target);
} else {
/* Otherwise just pull from the free list */
target = list_entry(ieee->network_free_list.next,
@@ -1402,6 +1498,7 @@
"BEACON" : "PROBE RESPONSE");
#endif
memcpy(target, &network, sizeof(*target));
+ network.ibss_dfs = NULL;
list_add_tail(&target->list, &ieee->network_list);
} else {
IEEE80211_DEBUG_SCAN("Updating '%s' (" MAC_FMT ") via %s.\n",
@@ -1411,6 +1508,7 @@
is_beacon(beacon->header.frame_ctl) ?
"BEACON" : "PROBE RESPONSE");
update_network(target, &network);
+ network.ibss_dfs = NULL;
}
spin_unlock_irqrestore(&ieee->lock, flags);
@@ -1495,10 +1593,43 @@
header);
break;
+ case IEEE80211_STYPE_ACTION:
+ IEEE80211_DEBUG_MGMT("ACTION\n");
+ if (ieee->handle_action)
+ ieee->handle_action(ieee->dev,
+ (struct ieee80211_action *)
+ header, stats);
+ break;
+
+ case IEEE80211_STYPE_REASSOC_REQ:
+ IEEE80211_DEBUG_MGMT("received reassoc (%d)\n",
+ WLAN_FC_GET_STYPE(le16_to_cpu
+ (header->frame_ctl)));
+
+ IEEE80211_WARNING("%s: IEEE80211_REASSOC_REQ received\n",
+ ieee->dev->name);
+ if (ieee->handle_reassoc_request != NULL)
+ ieee->handle_reassoc_request(ieee->dev,
+ (struct ieee80211_reassoc_request *)
+ header);
+ break;
+
+ case IEEE80211_STYPE_ASSOC_REQ:
+ IEEE80211_DEBUG_MGMT("received assoc (%d)\n",
+ WLAN_FC_GET_STYPE(le16_to_cpu
+ (header->frame_ctl)));
+
+ IEEE80211_WARNING("%s: IEEE80211_ASSOC_REQ received\n",
+ ieee->dev->name);
+ if (ieee->handle_assoc_request != NULL)
+ ieee->handle_assoc_request(ieee->dev);
+ break;
+
case IEEE80211_STYPE_DEAUTH:
- printk("DEAUTH from AP\n");
+ IEEE80211_DEBUG_MGMT("DEAUTH\n");
if (ieee->handle_deauth != NULL)
- ieee->handle_deauth(ieee->dev, (struct ieee80211_auth *)
+ ieee->handle_deauth(ieee->dev,
+ (struct ieee80211_deauth *)
header);
break;
default:
diff --git a/net/ieee80211/ieee80211_tx.c b/net/ieee80211/ieee80211_tx.c
index 8fdd943..8b4332f 100644
--- a/net/ieee80211/ieee80211_tx.c
+++ b/net/ieee80211/ieee80211_tx.c
@@ -56,7 +56,18 @@
`--------------------------------------------------| |------'
Total: 28 non-data bytes `----.----'
|
- .- 'Frame data' expands to <---------------------------'
+ .- 'Frame data' expands, if WEP enabled, to <----------'
+ |
+ V
+ ,-----------------------.
+Bytes | 4 | 0-2296 | 4 |
+ |-----|-----------|-----|
+Desc. | IV | Encrypted | ICV |
+ | | Packet | |
+ `-----| |-----'
+ `-----.-----'
+ |
+ .- 'Encrypted Packet' expands to
|
V
,---------------------------------------------------.
@@ -65,18 +76,7 @@
Desc. | SNAP | SNAP | Control |Eth Tunnel| Type | IP |
| DSAP | SSAP | | | | Packet |
| 0xAA | 0xAA |0x03 (UI)|0x00-00-F8| | |
- `-----------------------------------------| |
-Total: 8 non-data bytes `----.----'
- |
- .- 'IP Packet' expands, if WEP enabled, to <--'
- |
- V
- ,-----------------------.
-Bytes | 4 | 0-2296 | 4 |
- |-----|-----------|-----|
-Desc. | IV | Encrypted | ICV |
- | | IP Packet | |
- `-----------------------'
+ `----------------------------------------------------
Total: 8 non-data bytes
802.3 Ethernet Data Frame
@@ -470,7 +470,9 @@
atomic_inc(&crypt->refcnt);
if (crypt->ops->build_iv)
crypt->ops->build_iv(skb_frag, hdr_len,
- crypt->priv);
+ ieee->sec.keys[ieee->sec.active_key],
+ ieee->sec.key_sizes[ieee->sec.active_key],
+ crypt->priv);
atomic_dec(&crypt->refcnt);
}
diff --git a/net/ieee80211/ieee80211_wx.c b/net/ieee80211/ieee80211_wx.c
index f87c6b8..af7f9bb 100644
--- a/net/ieee80211/ieee80211_wx.c
+++ b/net/ieee80211/ieee80211_wx.c
@@ -149,9 +149,7 @@
iwe.u.qual.updated |= IW_QUAL_QUAL_INVALID |
IW_QUAL_LEVEL_INVALID;
iwe.u.qual.qual = 0;
- iwe.u.qual.level = 0;
} else {
- iwe.u.qual.level = network->stats.rssi;
if (ieee->perfect_rssi == ieee->worst_rssi)
iwe.u.qual.qual = 100;
else
@@ -179,6 +177,13 @@
iwe.u.qual.noise = network->stats.noise;
}
+ if (!(network->stats.mask & IEEE80211_STATMASK_SIGNAL)) {
+ iwe.u.qual.updated |= IW_QUAL_LEVEL_INVALID;
+ iwe.u.qual.level = 0;
+ } else {
+ iwe.u.qual.level = network->stats.signal;
+ }
+
start = iwe_stream_add_event(start, stop, &iwe, IW_EV_QUAL_LEN);
iwe.cmd = IWEVCUSTOM;
@@ -188,33 +193,21 @@
if (iwe.u.data.length)
start = iwe_stream_add_point(start, stop, &iwe, custom);
+ memset(&iwe, 0, sizeof(iwe));
if (network->wpa_ie_len) {
- char buf[MAX_WPA_IE_LEN * 2 + 30];
-
- u8 *p = buf;
- p += sprintf(p, "wpa_ie=");
- for (i = 0; i < network->wpa_ie_len; i++) {
- p += sprintf(p, "%02x", network->wpa_ie[i]);
- }
-
- memset(&iwe, 0, sizeof(iwe));
- iwe.cmd = IWEVCUSTOM;
- iwe.u.data.length = strlen(buf);
+ char buf[MAX_WPA_IE_LEN];
+ memcpy(buf, network->wpa_ie, network->wpa_ie_len);
+ iwe.cmd = IWEVGENIE;
+ iwe.u.data.length = network->wpa_ie_len;
start = iwe_stream_add_point(start, stop, &iwe, buf);
}
+ memset(&iwe, 0, sizeof(iwe));
if (network->rsn_ie_len) {
- char buf[MAX_WPA_IE_LEN * 2 + 30];
-
- u8 *p = buf;
- p += sprintf(p, "rsn_ie=");
- for (i = 0; i < network->rsn_ie_len; i++) {
- p += sprintf(p, "%02x", network->rsn_ie[i]);
- }
-
- memset(&iwe, 0, sizeof(iwe));
- iwe.cmd = IWEVCUSTOM;
- iwe.u.data.length = strlen(buf);
+ char buf[MAX_WPA_IE_LEN];
+ memcpy(buf, network->rsn_ie, network->rsn_ie_len);
+ iwe.cmd = IWEVGENIE;
+ iwe.u.data.length = network->rsn_ie_len;
start = iwe_stream_add_point(start, stop, &iwe, buf);
}
@@ -229,6 +222,28 @@
if (iwe.u.data.length)
start = iwe_stream_add_point(start, stop, &iwe, custom);
+ /* Add spectrum management information */
+ iwe.cmd = -1;
+ p = custom;
+ p += snprintf(p, MAX_CUSTOM_LEN - (p - custom), " Channel flags: ");
+
+ if (ieee80211_get_channel_flags(ieee, network->channel) &
+ IEEE80211_CH_INVALID) {
+ iwe.cmd = IWEVCUSTOM;
+ p += snprintf(p, MAX_CUSTOM_LEN - (p - custom), "INVALID ");
+ }
+
+ if (ieee80211_get_channel_flags(ieee, network->channel) &
+ IEEE80211_CH_RADAR_DETECT) {
+ iwe.cmd = IWEVCUSTOM;
+ p += snprintf(p, MAX_CUSTOM_LEN - (p - custom), "DFS ");
+ }
+
+ if (iwe.cmd == IWEVCUSTOM) {
+ iwe.u.data.length = p - custom;
+ start = iwe_stream_add_point(start, stop, &iwe, custom);
+ }
+
return start;
}
@@ -734,9 +749,98 @@
return 0;
}
+int ieee80211_wx_set_auth(struct net_device *dev,
+ struct iw_request_info *info,
+ union iwreq_data *wrqu,
+ char *extra)
+{
+ struct ieee80211_device *ieee = netdev_priv(dev);
+ unsigned long flags;
+ int err = 0;
+
+ spin_lock_irqsave(&ieee->lock, flags);
+
+ switch (wrqu->param.flags & IW_AUTH_INDEX) {
+ case IW_AUTH_WPA_VERSION:
+ case IW_AUTH_CIPHER_PAIRWISE:
+ case IW_AUTH_CIPHER_GROUP:
+ case IW_AUTH_KEY_MGMT:
+ /*
+ * Host AP driver does not use these parameters and allows
+ * wpa_supplicant to control them internally.
+ */
+ break;
+ case IW_AUTH_TKIP_COUNTERMEASURES:
+ break; /* FIXME */
+ case IW_AUTH_DROP_UNENCRYPTED:
+ ieee->drop_unencrypted = !!wrqu->param.value;
+ break;
+ case IW_AUTH_80211_AUTH_ALG:
+ break; /* FIXME */
+ case IW_AUTH_WPA_ENABLED:
+ ieee->privacy_invoked = ieee->wpa_enabled = !!wrqu->param.value;
+ break;
+ case IW_AUTH_RX_UNENCRYPTED_EAPOL:
+ ieee->ieee802_1x = !!wrqu->param.value;
+ break;
+ case IW_AUTH_PRIVACY_INVOKED:
+ ieee->privacy_invoked = !!wrqu->param.value;
+ break;
+ default:
+ err = -EOPNOTSUPP;
+ break;
+ }
+ spin_unlock_irqrestore(&ieee->lock, flags);
+ return err;
+}
+
+int ieee80211_wx_get_auth(struct net_device *dev,
+ struct iw_request_info *info,
+ union iwreq_data *wrqu,
+ char *extra)
+{
+ struct ieee80211_device *ieee = netdev_priv(dev);
+ unsigned long flags;
+ int err = 0;
+
+ spin_lock_irqsave(&ieee->lock, flags);
+
+ switch (wrqu->param.flags & IW_AUTH_INDEX) {
+ case IW_AUTH_WPA_VERSION:
+ case IW_AUTH_CIPHER_PAIRWISE:
+ case IW_AUTH_CIPHER_GROUP:
+ case IW_AUTH_KEY_MGMT:
+ case IW_AUTH_TKIP_COUNTERMEASURES: /* FIXME */
+ case IW_AUTH_80211_AUTH_ALG: /* FIXME */
+ /*
+ * Host AP driver does not use these parameters and allows
+ * wpa_supplicant to control them internally.
+ */
+ err = -EOPNOTSUPP;
+ break;
+ case IW_AUTH_DROP_UNENCRYPTED:
+ wrqu->param.value = ieee->drop_unencrypted;
+ break;
+ case IW_AUTH_WPA_ENABLED:
+ wrqu->param.value = ieee->wpa_enabled;
+ break;
+ case IW_AUTH_RX_UNENCRYPTED_EAPOL:
+ wrqu->param.value = ieee->ieee802_1x;
+ break;
+ default:
+ err = -EOPNOTSUPP;
+ break;
+ }
+ spin_unlock_irqrestore(&ieee->lock, flags);
+ return err;
+}
+
EXPORT_SYMBOL(ieee80211_wx_set_encodeext);
EXPORT_SYMBOL(ieee80211_wx_get_encodeext);
EXPORT_SYMBOL(ieee80211_wx_get_scan);
EXPORT_SYMBOL(ieee80211_wx_set_encode);
EXPORT_SYMBOL(ieee80211_wx_get_encode);
+
+EXPORT_SYMBOL_GPL(ieee80211_wx_set_auth);
+EXPORT_SYMBOL_GPL(ieee80211_wx_get_auth);
diff --git a/net/socket.c b/net/socket.c
index a00851f..7e1bdef 100644
--- a/net/socket.c
+++ b/net/socket.c
@@ -84,10 +84,7 @@
#include <linux/compat.h>
#include <linux/kmod.h>
#include <linux/audit.h>
-
-#ifdef CONFIG_NET_RADIO
-#include <linux/wireless.h> /* Note : will define WIRELESS_EXT */
-#endif /* CONFIG_NET_RADIO */
+#include <linux/wireless.h>
#include <asm/uaccess.h>
#include <asm/unistd.h>
@@ -840,11 +837,11 @@
if (cmd >= SIOCDEVPRIVATE && cmd <= (SIOCDEVPRIVATE + 15)) {
err = dev_ioctl(cmd, argp);
} else
-#ifdef WIRELESS_EXT
+#ifdef CONFIG_WIRELESS_EXT
if (cmd >= SIOCIWFIRST && cmd <= SIOCIWLAST) {
err = dev_ioctl(cmd, argp);
} else
-#endif /* WIRELESS_EXT */
+#endif /* CONFIG_WIRELESS_EXT */
switch (cmd) {
case FIOSETOWN:
case SIOCSPGRP: