pcmcia: split up modify_configuration() into two fixup functions
pcmcia_modify_configuration() was only used by two drivers to fix up
one issue each: setting the Vpp to a different value, and reducing
the IO width to 8 bit. Introduce two explicitly named functions
handling these things, and remove one further typedef.
CC: netdev@vger.kernel.org
CC: linux-mtd@lists.infradead.org
Tested-by: Wolfram Sang <w.sang@pengutronix.de>
Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
diff --git a/drivers/pcmcia/pcmcia_resource.c b/drivers/pcmcia/pcmcia_resource.c
index bf16a1c..14b1a95 100644
--- a/drivers/pcmcia/pcmcia_resource.c
+++ b/drivers/pcmcia/pcmcia_resource.c
@@ -226,92 +226,90 @@
EXPORT_SYMBOL(pcmcia_map_mem_page);
-/** pcmcia_modify_configuration
+/**
+ * pcmcia_fixup_iowidth() - reduce io width to 8bit
*
- * Modify a locked socket configuration
+ * pcmcia_fixup_iowidth() allows a PCMCIA device driver to reduce the
+ * IO width to 8bit after having called pcmcia_request_configuration()
+ * previously.
*/
-int pcmcia_modify_configuration(struct pcmcia_device *p_dev,
- modconf_t *mod)
+int pcmcia_fixup_iowidth(struct pcmcia_device *p_dev)
{
- struct pcmcia_socket *s;
- config_t *c;
- int ret;
-
- s = p_dev->socket;
+ struct pcmcia_socket *s = p_dev->socket;
+ pccard_io_map io_off = { 0, 0, 0, 0, 1 };
+ pccard_io_map io_on;
+ int i, ret = 0;
mutex_lock(&s->ops_mutex);
- c = p_dev->function_config;
- if (!(s->state & SOCKET_PRESENT)) {
- dev_dbg(&p_dev->dev, "No card present\n");
- ret = -ENODEV;
- goto unlock;
- }
- if (!(c->state & CONFIG_LOCKED)) {
- dev_dbg(&p_dev->dev, "Configuration isnt't locked\n");
+ dev_dbg(&p_dev->dev, "fixup iowidth to 8bit\n");
+
+ if (!(s->state & SOCKET_PRESENT) ||
+ !(p_dev->function_config->state & CONFIG_LOCKED)) {
+ dev_dbg(&p_dev->dev, "No card? Config not locked?\n");
ret = -EACCES;
goto unlock;
}
- if (mod->Attributes & (CONF_IRQ_CHANGE_VALID | CONF_VCC_CHANGE_VALID)) {
- dev_dbg(&p_dev->dev,
- "changing Vcc or IRQ is not allowed at this time\n");
- ret = -EINVAL;
- goto unlock;
+ io_on.speed = io_speed;
+ for (i = 0; i < MAX_IO_WIN; i++) {
+ if (!s->io[i].res)
+ continue;
+ io_off.map = i;
+ io_on.map = i;
+
+ io_on.flags = MAP_ACTIVE | IO_DATA_PATH_WIDTH_8;
+ io_on.start = s->io[i].res->start;
+ io_on.stop = s->io[i].res->end;
+
+ s->ops->set_io_map(s, &io_off);
+ mdelay(40);
+ s->ops->set_io_map(s, &io_on);
}
-
- /* We only allow changing Vpp1 and Vpp2 to the same value */
- if ((mod->Attributes & CONF_VPP1_CHANGE_VALID) &&
- (mod->Attributes & CONF_VPP2_CHANGE_VALID)) {
- if (mod->Vpp1 != mod->Vpp2) {
- dev_dbg(&p_dev->dev,
- "Vpp1 and Vpp2 must be the same\n");
- ret = -EINVAL;
- goto unlock;
- }
- s->socket.Vpp = mod->Vpp1;
- if (s->ops->set_socket(s, &s->socket)) {
- dev_printk(KERN_WARNING, &p_dev->dev,
- "Unable to set VPP\n");
- ret = -EIO;
- goto unlock;
- }
- } else if ((mod->Attributes & CONF_VPP1_CHANGE_VALID) ||
- (mod->Attributes & CONF_VPP2_CHANGE_VALID)) {
- dev_dbg(&p_dev->dev,
- "changing Vcc is not allowed at this time\n");
- ret = -EINVAL;
- goto unlock;
- }
-
- if (mod->Attributes & CONF_IO_CHANGE_WIDTH) {
- pccard_io_map io_off = { 0, 0, 0, 0, 1 };
- pccard_io_map io_on;
- int i;
-
- io_on.speed = io_speed;
- for (i = 0; i < MAX_IO_WIN; i++) {
- if (!s->io[i].res)
- continue;
- io_off.map = i;
- io_on.map = i;
-
- io_on.flags = MAP_ACTIVE | IO_DATA_PATH_WIDTH_8;
- io_on.start = s->io[i].res->start;
- io_on.stop = s->io[i].res->end;
-
- s->ops->set_io_map(s, &io_off);
- mdelay(40);
- s->ops->set_io_map(s, &io_on);
- }
- }
- ret = 0;
unlock:
mutex_unlock(&s->ops_mutex);
return ret;
-} /* modify_configuration */
-EXPORT_SYMBOL(pcmcia_modify_configuration);
+}
+EXPORT_SYMBOL(pcmcia_fixup_iowidth);
+
+
+/**
+ * pcmcia_fixup_vpp() - set Vpp to a new voltage level
+ *
+ * pcmcia_fixup_vpp() allows a PCMCIA device driver to set Vpp to
+ * a new voltage level between calls to pcmcia_request_configuration()
+ * and pcmcia_disable_device().
+ */
+int pcmcia_fixup_vpp(struct pcmcia_device *p_dev, unsigned char new_vpp)
+{
+ struct pcmcia_socket *s = p_dev->socket;
+ int ret = 0;
+
+ mutex_lock(&s->ops_mutex);
+
+ dev_dbg(&p_dev->dev, "fixup Vpp to %d\n", new_vpp);
+
+ if (!(s->state & SOCKET_PRESENT) ||
+ !(p_dev->function_config->state & CONFIG_LOCKED)) {
+ dev_dbg(&p_dev->dev, "No card? Config not locked?\n");
+ ret = -EACCES;
+ goto unlock;
+ }
+
+ s->socket.Vpp = new_vpp;
+ if (s->ops->set_socket(s, &s->socket)) {
+ dev_warn(&p_dev->dev, "Unable to set VPP\n");
+ ret = -EIO;
+ goto unlock;
+ }
+
+unlock:
+ mutex_unlock(&s->ops_mutex);
+
+ return ret;
+}
+EXPORT_SYMBOL(pcmcia_fixup_vpp);
int pcmcia_release_configuration(struct pcmcia_device *p_dev)