drivers/rtc/rtc-pcf8523.c - kernel/msm-4.9 - Gitiles

 /*
  * Copyright (C) 2012 Avionic Design GmbH
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
  * published by the Free Software Foundation.
  */

 #include <linux/bcd.h>
 #include <linux/i2c.h>
 #include <linux/module.h>
 #include <linux/rtc.h>
 #include <linux/of.h>

 #define DRIVER_NAME "rtc-pcf8523"

 #define REG_CONTROL1 0x00
 #define REG_CONTROL1_CAP_SEL (1 << 7)
 #define REG_CONTROL1_STOP    (1 << 5)

 #define REG_CONTROL3 0x02
 #define REG_CONTROL3_PM_BLD (1 << 7) /* battery low detection disabled */
 #define REG_CONTROL3_PM_VDD (1 << 6) /* switch-over disabled */
 #define REG_CONTROL3_PM_DSM (1 << 5) /* direct switching mode */
 #define REG_CONTROL3_PM_MASK 0xe0
 #define REG_CONTROL3_BLF (1 << 2) /* battery low bit, read-only */

 #define REG_SECONDS  0x03
 #define REG_SECONDS_OS (1 << 7)

 #define REG_MINUTES  0x04
 #define REG_HOURS    0x05
 #define REG_DAYS     0x06
 #define REG_WEEKDAYS 0x07
 #define REG_MONTHS   0x08
 #define REG_YEARS    0x09

 struct pcf8523 {
 	struct rtc_device *rtc;
 };

 static int pcf8523_read(struct i2c_client *client, u8 reg, u8 *valuep)
 {
 	struct i2c_msg msgs[2];
 	u8 value = 0;
 	int err;

 	msgs[0].addr = client->addr;
 	msgs[0].flags = 0;
 	msgs[0].len = sizeof(reg);
 	msgs[0].buf = &reg;

 	msgs[1].addr = client->addr;
 	msgs[1].flags = I2C_M_RD;
 	msgs[1].len = sizeof(value);
 	msgs[1].buf = &value;

 	err = i2c_transfer(client->adapter, msgs, ARRAY_SIZE(msgs));
 	if (err < 0)
 		return err;

 	*valuep = value;

 	return 0;
 }

 static int pcf8523_write(struct i2c_client *client, u8 reg, u8 value)
 {
 	u8 buffer[2] = { reg, value };
 	struct i2c_msg msg;
 	int err;

 	msg.addr = client->addr;
 	msg.flags = 0;
 	msg.len = sizeof(buffer);
 	msg.buf = buffer;

 	err = i2c_transfer(client->adapter, &msg, 1);
 	if (err < 0)
 		return err;

 	return 0;
 }

 static int pcf8523_select_capacitance(struct i2c_client *client, bool high)
 {
 	u8 value;
 	int err;

 	err = pcf8523_read(client, REG_CONTROL1, &value);
 	if (err < 0)
 		return err;

 	if (!high)
 		value &= ~REG_CONTROL1_CAP_SEL;
 	else
 		value |= REG_CONTROL1_CAP_SEL;

 	err = pcf8523_write(client, REG_CONTROL1, value);
 	if (err < 0)
 		return err;

 	return err;
 }

 static int pcf8523_set_pm(struct i2c_client *client, u8 pm)
 {
 	u8 value;
 	int err;

 	err = pcf8523_read(client, REG_CONTROL3, &value);
 	if (err < 0)
 		return err;

 	value = (value & ~REG_CONTROL3_PM_MASK) | pm;

 	err = pcf8523_write(client, REG_CONTROL3, value);
 	if (err < 0)
 		return err;

 	return 0;
 }

 static int pcf8523_stop_rtc(struct i2c_client *client)
 {
 	u8 value;
 	int err;

 	err = pcf8523_read(client, REG_CONTROL1, &value);
 	if (err < 0)
 		return err;

 	value |= REG_CONTROL1_STOP;

 	err = pcf8523_write(client, REG_CONTROL1, value);
 	if (err < 0)
 		return err;

 	return 0;
 }

 static int pcf8523_start_rtc(struct i2c_client *client)
 {
 	u8 value;
 	int err;

 	err = pcf8523_read(client, REG_CONTROL1, &value);
 	if (err < 0)
 		return err;

 	value &= ~REG_CONTROL1_STOP;

 	err = pcf8523_write(client, REG_CONTROL1, value);
 	if (err < 0)
 		return err;

 	return 0;
 }

 static int pcf8523_rtc_read_time(struct device *dev, struct rtc_time *tm)
 {
 	struct i2c_client *client = to_i2c_client(dev);
 	u8 start = REG_SECONDS, regs[7];
 	struct i2c_msg msgs[2];
 	int err;

 	msgs[0].addr = client->addr;
 	msgs[0].flags = 0;
 	msgs[0].len = 1;
 	msgs[0].buf = &start;

 	msgs[1].addr = client->addr;
 	msgs[1].flags = I2C_M_RD;
 	msgs[1].len = sizeof(regs);
 	msgs[1].buf = regs;

 	err = i2c_transfer(client->adapter, msgs, ARRAY_SIZE(msgs));
 	if (err < 0)
 		return err;

 	if (regs[0] & REG_SECONDS_OS) {
 		/*
 		 * If the oscillator was stopped, try to clear the flag. Upon
 		 * power-up the flag is always set, but if we cannot clear it
 		 * the oscillator isn't running properly for some reason. The
 		 * sensible thing therefore is to return an error, signalling
 		 * that the clock cannot be assumed to be correct.
 		 */

 		regs[0] &= ~REG_SECONDS_OS;

 		err = pcf8523_write(client, REG_SECONDS, regs[0]);
 		if (err < 0)
 			return err;

 		err = pcf8523_read(client, REG_SECONDS, &regs[0]);
 		if (err < 0)
 			return err;

 		if (regs[0] & REG_SECONDS_OS)
 			return -EAGAIN;
 	}

 	tm->tm_sec = bcd2bin(regs[0] & 0x7f);
 	tm->tm_min = bcd2bin(regs[1] & 0x7f);
 	tm->tm_hour = bcd2bin(regs[2] & 0x3f);
 	tm->tm_mday = bcd2bin(regs[3] & 0x3f);
 	tm->tm_wday = regs[4] & 0x7;
 	tm->tm_mon = bcd2bin(regs[5] & 0x1f);
 	tm->tm_year = bcd2bin(regs[6]) + 100;

 	return rtc_valid_tm(tm);
 }

 static int pcf8523_rtc_set_time(struct device *dev, struct rtc_time *tm)
 {
 	struct i2c_client *client = to_i2c_client(dev);
 	struct i2c_msg msg;
 	u8 regs[8];
 	int err;

 	err = pcf8523_stop_rtc(client);
 	if (err < 0)
 		return err;

 	regs[0] = REG_SECONDS;
 	regs[1] = bin2bcd(tm->tm_sec);
 	regs[2] = bin2bcd(tm->tm_min);
 	regs[3] = bin2bcd(tm->tm_hour);
 	regs[4] = bin2bcd(tm->tm_mday);
 	regs[5] = tm->tm_wday;
 	regs[6] = bin2bcd(tm->tm_mon);
 	regs[7] = bin2bcd(tm->tm_year - 100);

 	msg.addr = client->addr;
 	msg.flags = 0;
 	msg.len = sizeof(regs);
 	msg.buf = regs;

 	err = i2c_transfer(client->adapter, &msg, 1);
 	if (err < 0) {
 		/*
 		 * If the time cannot be set, restart the RTC anyway. Note
 		 * that errors are ignored if the RTC cannot be started so
 		 * that we have a chance to propagate the original error.
 		 */
 		pcf8523_start_rtc(client);
 		return err;
 	}

 	return pcf8523_start_rtc(client);
 }

 #ifdef CONFIG_RTC_INTF_DEV
 static int pcf8523_rtc_ioctl(struct device *dev, unsigned int cmd,
 			     unsigned long arg)
 {
 	struct i2c_client *client = to_i2c_client(dev);
 	u8 value;
 	int ret = 0, err;

 	switch (cmd) {
 	case RTC_VL_READ:
 		err = pcf8523_read(client, REG_CONTROL3, &value);
 		if (err < 0)
 			return err;

 		if (value & REG_CONTROL3_BLF)
 			ret = 1;

 		if (copy_to_user((void __user *)arg, &ret, sizeof(int)))
 			return -EFAULT;

 		return 0;
 	default:
 		return -ENOIOCTLCMD;
 	}
 }
 #else
 #define pcf8523_rtc_ioctl NULL
 #endif

 static const struct rtc_class_ops pcf8523_rtc_ops = {
 	.read_time = pcf8523_rtc_read_time,
 	.set_time = pcf8523_rtc_set_time,
 	.ioctl = pcf8523_rtc_ioctl,
 };

 static int pcf8523_probe(struct i2c_client *client,
 			 const struct i2c_device_id *id)
 {
 	struct pcf8523 *pcf;
 	int err;

 	if (!i2c_check_functionality(client->adapter, I2C_FUNC_I2C))
 		return -ENODEV;

 	pcf = devm_kzalloc(&client->dev, sizeof(*pcf), GFP_KERNEL);
 	if (!pcf)
 		return -ENOMEM;

 	err = pcf8523_select_capacitance(client, true);
 	if (err < 0)
 		return err;

 	err = pcf8523_set_pm(client, 0);
 	if (err < 0)
 		return err;

 	pcf->rtc = rtc_device_register(DRIVER_NAME, &client->dev,
 				       &pcf8523_rtc_ops, THIS_MODULE);
 	if (IS_ERR(pcf->rtc))
 		return PTR_ERR(pcf->rtc);

 	i2c_set_clientdata(client, pcf);

 	return 0;
 }

 static int pcf8523_remove(struct i2c_client *client)
 {
 	struct pcf8523 *pcf = i2c_get_clientdata(client);

 	rtc_device_unregister(pcf->rtc);

 	return 0;
 }

 static const struct i2c_device_id pcf8523_id[] = {
 	{ "pcf8523", 0 },
 	{ }
 };
 MODULE_DEVICE_TABLE(i2c, pcf8523_id);

 #ifdef CONFIG_OF
 static const struct of_device_id pcf8523_of_match[] = {
 	{ .compatible = "nxp,pcf8523" },
 	{ }
 };
 MODULE_DEVICE_TABLE(of, pcf8523_of_match);
 #endif

 static struct i2c_driver pcf8523_driver = {
 	.driver = {
 		.name = DRIVER_NAME,
 		.owner = THIS_MODULE,
 		.of_match_table = of_match_ptr(pcf8523_of_match),
 	},
 	.probe = pcf8523_probe,
 	.remove = pcf8523_remove,
 	.id_table = pcf8523_id,
 };
 module_i2c_driver(pcf8523_driver);

 MODULE_AUTHOR("Thierry Reding <thierry.reding@avionic-design.de>");
 MODULE_DESCRIPTION("NXP PCF8523 RTC driver");
 MODULE_LICENSE("GPL v2");
	/*
	* Copyright (C) 2012 Avionic Design GmbH
	*
	* This program is free software; you can redistribute it and/or modify
	* it under the terms of the GNU General Public License version 2 as
	* published by the Free Software Foundation.
	*/

	#include <linux/bcd.h>
	#include <linux/i2c.h>
	#include <linux/module.h>
	#include <linux/rtc.h>
	#include <linux/of.h>

	#define DRIVER_NAME "rtc-pcf8523"

	#define REG_CONTROL1 0x00
	#define REG_CONTROL1_CAP_SEL (1 << 7)
	#define REG_CONTROL1_STOP (1 << 5)

	#define REG_CONTROL3 0x02
	#define REG_CONTROL3_PM_BLD (1 << 7) /* battery low detection disabled */
	#define REG_CONTROL3_PM_VDD (1 << 6) /* switch-over disabled */
	#define REG_CONTROL3_PM_DSM (1 << 5) /* direct switching mode */
	#define REG_CONTROL3_PM_MASK 0xe0
	#define REG_CONTROL3_BLF (1 << 2) /* battery low bit, read-only */

	#define REG_SECONDS 0x03
	#define REG_SECONDS_OS (1 << 7)

	#define REG_MINUTES 0x04
	#define REG_HOURS 0x05
	#define REG_DAYS 0x06
	#define REG_WEEKDAYS 0x07
	#define REG_MONTHS 0x08
	#define REG_YEARS 0x09

	struct pcf8523 {
	struct rtc_device *rtc;
	};

	static int pcf8523_read(struct i2c_client client, u8 reg, u8 valuep)
	{
	struct i2c_msg msgs[2];
	u8 value = 0;
	int err;

	msgs[0].addr = client->addr;
	msgs[0].flags = 0;
	msgs[0].len = sizeof(reg);
	msgs[0].buf = ®

	msgs[1].addr = client->addr;
	msgs[1].flags = I2C_M_RD;
	msgs[1].len = sizeof(value);
	msgs[1].buf = &value;

	err = i2c_transfer(client->adapter, msgs, ARRAY_SIZE(msgs));
	if (err < 0)
	return err;

	*valuep = value;

	return 0;
	}

	static int pcf8523_write(struct i2c_client *client, u8 reg, u8 value)
	{
	u8 buffer[2] = { reg, value };
	struct i2c_msg msg;
	int err;

	msg.addr = client->addr;
	msg.flags = 0;
	msg.len = sizeof(buffer);
	msg.buf = buffer;

	err = i2c_transfer(client->adapter, &msg, 1);
	if (err < 0)
	return err;

	return 0;
	}

	static int pcf8523_select_capacitance(struct i2c_client *client, bool high)
	{
	u8 value;
	int err;

	err = pcf8523_read(client, REG_CONTROL1, &value);
	if (err < 0)
	return err;

	if (!high)
	value &= ~REG_CONTROL1_CAP_SEL;
	else
	value \|= REG_CONTROL1_CAP_SEL;

	err = pcf8523_write(client, REG_CONTROL1, value);
	if (err < 0)
	return err;

	return err;
	}

	static int pcf8523_set_pm(struct i2c_client *client, u8 pm)
	{
	u8 value;
	int err;

	err = pcf8523_read(client, REG_CONTROL3, &value);
	if (err < 0)
	return err;

	value = (value & ~REG_CONTROL3_PM_MASK) \| pm;

	err = pcf8523_write(client, REG_CONTROL3, value);
	if (err < 0)
	return err;

	return 0;
	}

	static int pcf8523_stop_rtc(struct i2c_client *client)
	{
	u8 value;
	int err;

	err = pcf8523_read(client, REG_CONTROL1, &value);
	if (err < 0)
	return err;

	value \|= REG_CONTROL1_STOP;

	err = pcf8523_write(client, REG_CONTROL1, value);
	if (err < 0)
	return err;

	return 0;
	}

	static int pcf8523_start_rtc(struct i2c_client *client)
	{
	u8 value;
	int err;

	err = pcf8523_read(client, REG_CONTROL1, &value);
	if (err < 0)
	return err;

	value &= ~REG_CONTROL1_STOP;

	err = pcf8523_write(client, REG_CONTROL1, value);
	if (err < 0)
	return err;

	return 0;
	}

	static int pcf8523_rtc_read_time(struct device dev, struct rtc_time tm)
	{
	struct i2c_client *client = to_i2c_client(dev);
	u8 start = REG_SECONDS, regs[7];
	struct i2c_msg msgs[2];
	int err;

	msgs[0].addr = client->addr;
	msgs[0].flags = 0;
	msgs[0].len = 1;
	msgs[0].buf = &start;

	msgs[1].addr = client->addr;
	msgs[1].flags = I2C_M_RD;
	msgs[1].len = sizeof(regs);
	msgs[1].buf = regs;

	err = i2c_transfer(client->adapter, msgs, ARRAY_SIZE(msgs));
	if (err < 0)
	return err;

	if (regs[0] & REG_SECONDS_OS) {
	/*
	* If the oscillator was stopped, try to clear the flag. Upon
	* power-up the flag is always set, but if we cannot clear it
	* the oscillator isn't running properly for some reason. The
	* sensible thing therefore is to return an error, signalling
	* that the clock cannot be assumed to be correct.
	*/

	regs[0] &= ~REG_SECONDS_OS;

	err = pcf8523_write(client, REG_SECONDS, regs[0]);
	if (err < 0)
	return err;

	err = pcf8523_read(client, REG_SECONDS, &regs[0]);
	if (err < 0)
	return err;

	if (regs[0] & REG_SECONDS_OS)
	return -EAGAIN;
	}

	tm->tm_sec = bcd2bin(regs[0] & 0x7f);
	tm->tm_min = bcd2bin(regs[1] & 0x7f);
	tm->tm_hour = bcd2bin(regs[2] & 0x3f);
	tm->tm_mday = bcd2bin(regs[3] & 0x3f);
	tm->tm_wday = regs[4] & 0x7;
	tm->tm_mon = bcd2bin(regs[5] & 0x1f);
	tm->tm_year = bcd2bin(regs[6]) + 100;

	return rtc_valid_tm(tm);
	}

	static int pcf8523_rtc_set_time(struct device dev, struct rtc_time tm)
	{
	struct i2c_client *client = to_i2c_client(dev);
	struct i2c_msg msg;
	u8 regs[8];
	int err;

	err = pcf8523_stop_rtc(client);
	if (err < 0)
	return err;

	regs[0] = REG_SECONDS;
	regs[1] = bin2bcd(tm->tm_sec);
	regs[2] = bin2bcd(tm->tm_min);
	regs[3] = bin2bcd(tm->tm_hour);
	regs[4] = bin2bcd(tm->tm_mday);
	regs[5] = tm->tm_wday;
	regs[6] = bin2bcd(tm->tm_mon);
	regs[7] = bin2bcd(tm->tm_year - 100);

	msg.addr = client->addr;
	msg.flags = 0;
	msg.len = sizeof(regs);
	msg.buf = regs;

	err = i2c_transfer(client->adapter, &msg, 1);
	if (err < 0) {
	/*
	* If the time cannot be set, restart the RTC anyway. Note
	* that errors are ignored if the RTC cannot be started so
	* that we have a chance to propagate the original error.
	*/
	pcf8523_start_rtc(client);
	return err;
	}

	return pcf8523_start_rtc(client);
	}

	#ifdef CONFIG_RTC_INTF_DEV
	static int pcf8523_rtc_ioctl(struct device *dev, unsigned int cmd,
	unsigned long arg)
	{
	struct i2c_client *client = to_i2c_client(dev);
	u8 value;
	int ret = 0, err;

	switch (cmd) {
	case RTC_VL_READ:
	err = pcf8523_read(client, REG_CONTROL3, &value);
	if (err < 0)
	return err;

	if (value & REG_CONTROL3_BLF)
	ret = 1;

	if (copy_to_user((void __user *)arg, &ret, sizeof(int)))
	return -EFAULT;

	return 0;
	default:
	return -ENOIOCTLCMD;
	}
	}
	#else
	#define pcf8523_rtc_ioctl NULL
	#endif

	static const struct rtc_class_ops pcf8523_rtc_ops = {
	.read_time = pcf8523_rtc_read_time,
	.set_time = pcf8523_rtc_set_time,
	.ioctl = pcf8523_rtc_ioctl,
	};

	static int pcf8523_probe(struct i2c_client *client,
	const struct i2c_device_id *id)
	{
	struct pcf8523 *pcf;
	int err;

	if (!i2c_check_functionality(client->adapter, I2C_FUNC_I2C))
	return -ENODEV;

	pcf = devm_kzalloc(&client->dev, sizeof(*pcf), GFP_KERNEL);
	if (!pcf)
	return -ENOMEM;

	err = pcf8523_select_capacitance(client, true);
	if (err < 0)
	return err;

	err = pcf8523_set_pm(client, 0);
	if (err < 0)
	return err;

	pcf->rtc = rtc_device_register(DRIVER_NAME, &client->dev,
	&pcf8523_rtc_ops, THIS_MODULE);
	if (IS_ERR(pcf->rtc))
	return PTR_ERR(pcf->rtc);

	i2c_set_clientdata(client, pcf);

	return 0;
	}

	static int pcf8523_remove(struct i2c_client *client)
	{
	struct pcf8523 *pcf = i2c_get_clientdata(client);

	rtc_device_unregister(pcf->rtc);

	return 0;
	}

	static const struct i2c_device_id pcf8523_id[] = {
	{ "pcf8523", 0 },
	{ }
	};
	MODULE_DEVICE_TABLE(i2c, pcf8523_id);

	#ifdef CONFIG_OF
	static const struct of_device_id pcf8523_of_match[] = {
	{ .compatible = "nxp,pcf8523" },
	{ }
	};
	MODULE_DEVICE_TABLE(of, pcf8523_of_match);
	#endif

	static struct i2c_driver pcf8523_driver = {
	.driver = {
	.name = DRIVER_NAME,
	.owner = THIS_MODULE,
	.of_match_table = of_match_ptr(pcf8523_of_match),
	},
	.probe = pcf8523_probe,
	.remove = pcf8523_remove,
	.id_table = pcf8523_id,
	};
	module_i2c_driver(pcf8523_driver);

	MODULE_AUTHOR("Thierry Reding <thierry.reding@avionic-design.de>");
	MODULE_DESCRIPTION("NXP PCF8523 RTC driver");
	MODULE_LICENSE("GPL v2");