Merge branch 'fixes-for-3.7' of git://gitorious.org/linux-can/linux-can
Marc Kleine-Budde says:
====================
here are two patches for the v3.7 release cycle. A patch by Wolfgang Grandegger
for the flexcan driver, which switches off a workaround on the imx6q that is
not needed, because the hardware is not affected by that bug. And a patch by
Stephane Grosjean which updates the pci device table for the peak pci sja1000
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
diff --git a/drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_main.c b/drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_main.c
index a8854d0..4c4fe5b 100644
--- a/drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_main.c
+++ b/drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_main.c
@@ -1930,12 +1930,12 @@
struct net_device *netdev = adapter->netdev;
struct pch_gbe_tx_ring *tx_ring = adapter->tx_ring;
struct pch_gbe_rx_ring *rx_ring = adapter->rx_ring;
- int err;
+ int err = -EINVAL;
/* Ensure we have a valid MAC */
if (!is_valid_ether_addr(adapter->hw.mac.addr)) {
pr_err("Error: Invalid MAC address\n");
- return -EINVAL;
+ goto out;
}
/* hardware has been reset, we need to reload some things */
@@ -1948,13 +1948,13 @@
err = pch_gbe_request_irq(adapter);
if (err) {
- pr_err("Error: can't bring device up\n");
- return err;
+ pr_err("Error: can't bring device up - irq request failed\n");
+ goto out;
}
err = pch_gbe_alloc_rx_buffers_pool(adapter, rx_ring, rx_ring->count);
if (err) {
- pr_err("Error: can't bring device up\n");
- return err;
+ pr_err("Error: can't bring device up - alloc rx buffers pool failed\n");
+ goto freeirq;
}
pch_gbe_alloc_tx_buffers(adapter, tx_ring);
pch_gbe_alloc_rx_buffers(adapter, rx_ring, rx_ring->count);
@@ -1969,6 +1969,11 @@
netif_start_queue(adapter->netdev);
return 0;
+
+freeirq:
+ pch_gbe_free_irq(adapter);
+out:
+ return err;
}
/**
diff --git a/drivers/net/ethernet/ti/Kconfig b/drivers/net/ethernet/ti/Kconfig
index b26cbda..2c41894 100644
--- a/drivers/net/ethernet/ti/Kconfig
+++ b/drivers/net/ethernet/ti/Kconfig
@@ -5,7 +5,7 @@
config NET_VENDOR_TI
bool "Texas Instruments (TI) devices"
default y
- depends on PCI || EISA || AR7 || (ARM && (ARCH_DAVINCI || ARCH_OMAP3))
+ depends on PCI || EISA || AR7 || (ARM && (ARCH_DAVINCI || ARCH_OMAP3 || SOC_AM33XX))
---help---
If you have a network (Ethernet) card belonging to this class, say Y
and read the Ethernet-HOWTO, available from
diff --git a/net/ipv6/route.c b/net/ipv6/route.c
index 7c7e963..b1e6cf0 100644
--- a/net/ipv6/route.c
+++ b/net/ipv6/route.c
@@ -219,7 +219,7 @@
};
static const u32 ip6_template_metrics[RTAX_MAX] = {
- [RTAX_HOPLIMIT - 1] = 255,
+ [RTAX_HOPLIMIT - 1] = 0,
};
static const struct rt6_info ip6_null_entry_template = {
@@ -1232,7 +1232,7 @@
rt->rt6i_dst.addr = fl6->daddr;
rt->rt6i_dst.plen = 128;
rt->rt6i_idev = idev;
- dst_metric_set(&rt->dst, RTAX_HOPLIMIT, 255);
+ dst_metric_set(&rt->dst, RTAX_HOPLIMIT, 0);
spin_lock_bh(&icmp6_dst_lock);
rt->dst.next = icmp6_dst_gc_list;