staging: comedi: adl_pci6208: fix the digital i/o subdevice
The PCI-6208 board has 4 digital outputs and 4 digital inputs.
The support for the digital i/o subdevice was commented out and
the code was just cut-and-paste from the skel driver. Enable
the digital i/o subdevice by uncommenting the code and fixing
the insn_bits and insn_config functions.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
diff --git a/drivers/staging/comedi/drivers/adl_pci6208.c b/drivers/staging/comedi/drivers/adl_pci6208.c
index 13cdbcc..e3f459b 100644
--- a/drivers/staging/comedi/drivers/adl_pci6208.c
+++ b/drivers/staging/comedi/drivers/adl_pci6208.c
@@ -137,54 +137,45 @@
return i;
}
-/* DIO devices are slightly special. Although it is possible to
- * implement the insn_read/insn_write interface, it is much more
- * useful to applications if you implement the insn_bits interface.
- * This allows packed reading/writing of the DIO channels. The
- * comedi core can convert between insn_bits and insn_read/write */
-/* static int pci6208_dio_insn_bits(struct comedi_device *dev,
- * struct comedi_subdevice *s, */
-/* struct comedi_insn *insn,unsigned int *data) */
-/* { */
- /* The insn data is a mask in data[0] and the new data
- * in data[1], each channel cooresponding to a bit. */
-/* if(data[0]){ */
-/* s->state &= ~data[0]; */
-/* s->state |= data[0]&data[1]; */
- /* Write out the new digital output lines */
- /* outw(s->state,dev->iobase + SKEL_DIO); */
-/* } */
+static int pci6208_dio_insn_bits(struct comedi_device *dev,
+ struct comedi_subdevice *s,
+ struct comedi_insn *insn,
+ unsigned int *data)
+{
+ unsigned int mask = data[0] & PCI6208_DIO_DO_MASK;
+ unsigned int bits = data[1];
- /* on return, data[1] contains the value of the digital
- * input and output lines. */
- /* data[1]=inw(dev->iobase + SKEL_DIO); */
- /* or we could just return the software copy of the output values if
- * it was a purely digital output subdevice */
- /* data[1]=s->state; */
+ if (mask) {
+ s->state &= ~mask;
+ s->state |= bits & mask;
-/* return insn->n; */
-/* } */
+ outw(s->state, dev->iobase + PCI6208_DIO);
+ }
-/* static int pci6208_dio_insn_config(struct comedi_device *dev,
- * struct comedi_subdevice *s, */
-/* struct comedi_insn *insn,unsigned int *data) */
-/* { */
-/* int chan=CR_CHAN(insn->chanspec); */
+ s->state = inw(dev->iobase + PCI6208_DIO);
+ data[1] = s->state;
- /* The input or output configuration of each digital line is
- * configured by a special insn_config instruction. chanspec
- * contains the channel to be changed, and data[0] contains the
- * value COMEDI_INPUT or COMEDI_OUTPUT. */
+ return insn->n;
+}
-/* if(data[0]==COMEDI_OUTPUT){ */
-/* s->io_bits |= 1<<chan; */
-/* }else{ */
-/* s->io_bits &= ~(1<<chan); */
-/* } */
- /* outw(s->io_bits,dev->iobase + SKEL_DIO_CONFIG); */
+static int pci6208_dio_insn_config(struct comedi_device *dev,
+ struct comedi_subdevice *s,
+ struct comedi_insn *insn,
+ unsigned int *data)
+{
+ int chan = CR_CHAN(insn->chanspec);
+ unsigned int mask = 1 << chan;
-/* return 1; */
-/* } */
+ switch (data[0]) {
+ case INSN_CONFIG_DIO_QUERY:
+ data[1] = (s->io_bits & mask) ? COMEDI_OUTPUT : COMEDI_INPUT;
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ return insn->n;
+}
static struct pci_dev *pci6208_find_device(struct comedi_device *dev,
struct comedi_devconfig *it)
@@ -268,15 +259,18 @@
s->insn_write = pci6208_ao_winsn;
s->insn_read = pci6208_ao_rinsn;
- /* s=dev->subdevices+1; */
+ s = dev->subdevices + 1;
/* digital i/o subdevice */
- /* s->type=COMEDI_SUBD_DIO; */
- /* s->subdev_flags=SDF_READABLE|SDF_WRITABLE; */
- /* s->n_chan=16; */
- /* s->maxdata=1; */
- /* s->range_table=&range_digital; */
- /* s->insn_bits = pci6208_dio_insn_bits; */
- /* s->insn_config = pci6208_dio_insn_config; */
+ s->type = COMEDI_SUBD_DIO;
+ s->subdev_flags = SDF_READABLE | SDF_WRITABLE;
+ s->n_chan = 8;
+ s->maxdata = 1;
+ s->range_table = &range_digital;
+ s->insn_bits = pci6208_dio_insn_bits;
+ s->insn_config = pci6208_dio_insn_config;
+
+ s->io_bits = 0x0f;
+ s->state = inw(dev->iobase + PCI6208_DIO);
dev_info(dev->class_dev, "%s: %s, I/O base=0x%04lx\n",
dev->driver->driver_name, dev->board_name, dev->iobase);