[media] em28xx: Add support for Terratec Cinergy T2 Stick HD
Terratec Cinergy T2 Stick HD [eb1a:8179] is a USB DVB-T/T2/C tuner that
contains following components:
* Empia EM28178 USB bridge
* Silicon Labs Si2168-A30 demodulator
* Silicon Labs Si2146-A10 tuner
I don't have the remote, so the RC_MAP is a best guess based on the pictures of
the remote controllers and other supported Terratec devices with a similar
remote.
[Antti: Resolved conflict caused by Leadtek VC100 patch]
Signed-off-by: Olli Salonen <olli.salonen@iki.fi>
Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
diff --git a/drivers/media/usb/em28xx/em28xx-cards.c b/drivers/media/usb/em28xx/em28xx-cards.c
index 3c97bf1..5f747a5 100644
--- a/drivers/media/usb/em28xx/em28xx-cards.c
+++ b/drivers/media/usb/em28xx/em28xx-cards.c
@@ -479,6 +479,20 @@
{-1, -1, -1, -1},
};
+static struct em28xx_reg_seq terratec_t2_stick_hd[] = {
+ {EM2874_R80_GPIO_P0_CTRL, 0xff, 0xff, 0},
+ {0x0d, 0xff, 0xff, 600},
+ {EM2874_R80_GPIO_P0_CTRL, 0xfc, 0xff, 10},
+ {EM2874_R80_GPIO_P0_CTRL, 0xbc, 0xff, 100},
+ {EM2874_R80_GPIO_P0_CTRL, 0xfc, 0xff, 100},
+ {EM2874_R80_GPIO_P0_CTRL, 0x00, 0xff, 300},
+ {EM2874_R80_GPIO_P0_CTRL, 0xf8, 0xff, 100},
+ {EM2874_R80_GPIO_P0_CTRL, 0xfc, 0xff, 300},
+ {0x0d, 0x42, 0xff, 1000},
+ {EM2874_R5F_TS_ENABLE, 0x85, 0xff, 0},
+ {-1, -1, -1, -1},
+};
+
/*
* Button definitions
*/
@@ -2257,6 +2271,17 @@
.amux = EM28XX_AMUX_LINE_IN,
} },
},
+ /* eb1a:8179 Terratec Cinergy T2 Stick HD.
+ * Empia EM28178, Silicon Labs Si2168, Silicon Labs Si2146 */
+ [EM28178_BOARD_TERRATEC_T2_STICK_HD] = {
+ .name = "Terratec Cinergy T2 Stick HD",
+ .def_i2c_bus = 1,
+ .i2c_speed = EM28XX_I2C_CLK_WAIT_ENABLE | EM28XX_I2C_FREQ_400_KHZ,
+ .tuner_type = TUNER_ABSENT,
+ .tuner_gpio = terratec_t2_stick_hd,
+ .has_dvb = 1,
+ .ir_codes = RC_MAP_TERRATEC_SLIM_2,
+ },
};
EXPORT_SYMBOL_GPL(em28xx_boards);
@@ -2440,6 +2465,8 @@
.driver_info = EM28178_BOARD_PCTV_292E },
{ USB_DEVICE(0x0413, 0x6f07),
.driver_info = EM2861_BOARD_LEADTEK_VC100 },
+ { USB_DEVICE(0xeb1a, 0x8179),
+ .driver_info = EM28178_BOARD_TERRATEC_T2_STICK_HD },
{ },
};
MODULE_DEVICE_TABLE(usb, em28xx_id_table);
diff --git a/drivers/media/usb/em28xx/em28xx-dvb.c b/drivers/media/usb/em28xx/em28xx-dvb.c
index 5a94f17..0b8823d 100644
--- a/drivers/media/usb/em28xx/em28xx-dvb.c
+++ b/drivers/media/usb/em28xx/em28xx-dvb.c
@@ -1604,6 +1604,65 @@
dvb->fe[0]->ops.set_lna = em28xx_pctv_292e_set_lna;
}
break;
+ case EM28178_BOARD_TERRATEC_T2_STICK_HD:
+ {
+ struct i2c_adapter *adapter;
+ struct i2c_client *client;
+ struct i2c_board_info info;
+ struct si2168_config si2168_config;
+ struct si2157_config si2157_config;
+
+ /* attach demod */
+ memset(&si2168_config, 0, sizeof(si2168_config));
+ si2168_config.i2c_adapter = &adapter;
+ si2168_config.fe = &dvb->fe[0];
+ si2168_config.ts_mode = SI2168_TS_PARALLEL;
+ memset(&info, 0, sizeof(struct i2c_board_info));
+ strlcpy(info.type, "si2168", I2C_NAME_SIZE);
+ info.addr = 0x64;
+ info.platform_data = &si2168_config;
+ request_module(info.type);
+ client = i2c_new_device(&dev->i2c_adap[dev->def_i2c_bus], &info);
+ if (client == NULL || client->dev.driver == NULL) {
+ result = -ENODEV;
+ goto out_free;
+ }
+
+ if (!try_module_get(client->dev.driver->owner)) {
+ i2c_unregister_device(client);
+ result = -ENODEV;
+ goto out_free;
+ }
+
+ dvb->i2c_client_demod = client;
+
+ /* attach tuner */
+ memset(&si2157_config, 0, sizeof(si2157_config));
+ si2157_config.fe = dvb->fe[0];
+ memset(&info, 0, sizeof(struct i2c_board_info));
+ strlcpy(info.type, "si2146", I2C_NAME_SIZE);
+ info.addr = 0x60;
+ info.platform_data = &si2157_config;
+ request_module("si2157");
+ client = i2c_new_device(adapter, &info);
+ if (client == NULL || client->dev.driver == NULL) {
+ module_put(dvb->i2c_client_demod->dev.driver->owner);
+ i2c_unregister_device(dvb->i2c_client_demod);
+ result = -ENODEV;
+ goto out_free;
+ }
+
+ if (!try_module_get(client->dev.driver->owner)) {
+ i2c_unregister_device(client);
+ module_put(dvb->i2c_client_demod->dev.driver->owner);
+ i2c_unregister_device(dvb->i2c_client_demod);
+ result = -ENODEV;
+ goto out_free;
+ }
+
+ dvb->i2c_client_tuner = client;
+ }
+ break;
default:
em28xx_errdev("/2: The frontend of your DVB/ATSC card"
" isn't supported yet\n");
diff --git a/drivers/media/usb/em28xx/em28xx.h b/drivers/media/usb/em28xx/em28xx.h
index 05e7f7c..8c970be 100644
--- a/drivers/media/usb/em28xx/em28xx.h
+++ b/drivers/media/usb/em28xx/em28xx.h
@@ -142,6 +142,7 @@
#define EM2874_BOARD_KWORLD_UB435Q_V3 93
#define EM28178_BOARD_PCTV_292E 94
#define EM2861_BOARD_LEADTEK_VC100 95
+#define EM28178_BOARD_TERRATEC_T2_STICK_HD 96
/* Limits minimum and default number of buffers */
#define EM28XX_MIN_BUF 4