net/mlx4_core: Add basic support for QP max-rate limiting
Add the low-level device commands and definitions used for QP max-rate limiting.
This is done through the following elements:
- read rate-limit device caps in QUERY_DEV_CAP: number of different
rates and the min/max rates in Kbs/Mbs/Gbs units
- enhance the QP context struct to contain rate limit units and value
- allow to do run time rate-limit setting to QPs through the
update-qp firmware command
- QP rate-limiting is disallowed for VFs
Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
diff --git a/drivers/net/ethernet/mellanox/mlx4/fw.c b/drivers/net/ethernet/mellanox/mlx4/fw.c
index 242bcee..4a471f5 100644
--- a/drivers/net/ethernet/mellanox/mlx4/fw.c
+++ b/drivers/net/ethernet/mellanox/mlx4/fw.c
@@ -144,7 +144,8 @@
[19] = "Performance optimized for limited rule configuration flow steering support",
[20] = "Recoverable error events support",
[21] = "Port Remap support",
- [22] = "QCN support"
+ [22] = "QCN support",
+ [23] = "QP rate limiting support"
};
int i;
@@ -697,6 +698,10 @@
#define QUERY_DEV_CAP_MAD_DEMUX_OFFSET 0xb0
#define QUERY_DEV_CAP_DMFS_HIGH_RATE_QPN_BASE_OFFSET 0xa8
#define QUERY_DEV_CAP_DMFS_HIGH_RATE_QPN_RANGE_OFFSET 0xac
+#define QUERY_DEV_CAP_QP_RATE_LIMIT_NUM_OFFSET 0xcc
+#define QUERY_DEV_CAP_QP_RATE_LIMIT_MAX_OFFSET 0xd0
+#define QUERY_DEV_CAP_QP_RATE_LIMIT_MIN_OFFSET 0xd2
+
dev_cap->flags2 = 0;
mailbox = mlx4_alloc_cmd_mailbox(dev);
@@ -904,6 +909,18 @@
QUERY_DEV_CAP_DMFS_HIGH_RATE_QPN_RANGE_OFFSET);
dev_cap->dmfs_high_rate_qpn_range &= MGM_QPN_MASK;
+ MLX4_GET(size, outbox, QUERY_DEV_CAP_QP_RATE_LIMIT_NUM_OFFSET);
+ dev_cap->rl_caps.num_rates = size;
+ if (dev_cap->rl_caps.num_rates) {
+ dev_cap->flags2 |= MLX4_DEV_CAP_FLAG2_QP_RATE_LIMIT;
+ MLX4_GET(size, outbox, QUERY_DEV_CAP_QP_RATE_LIMIT_MAX_OFFSET);
+ dev_cap->rl_caps.max_val = size & 0xfff;
+ dev_cap->rl_caps.max_unit = size >> 14;
+ MLX4_GET(size, outbox, QUERY_DEV_CAP_QP_RATE_LIMIT_MIN_OFFSET);
+ dev_cap->rl_caps.min_val = size & 0xfff;
+ dev_cap->rl_caps.min_unit = size >> 14;
+ }
+
MLX4_GET(field32, outbox, QUERY_DEV_CAP_EXT_2_FLAGS_OFFSET);
if (field32 & (1 << 16))
dev_cap->flags2 |= MLX4_DEV_CAP_FLAG2_UPDATE_QP;
@@ -979,6 +996,15 @@
dev_cap->dmfs_high_rate_qpn_base);
mlx4_dbg(dev, "DMFS high rate steer QPn range: %d\n",
dev_cap->dmfs_high_rate_qpn_range);
+
+ if (dev_cap->flags2 & MLX4_DEV_CAP_FLAG2_QP_RATE_LIMIT) {
+ struct mlx4_rate_limit_caps *rl_caps = &dev_cap->rl_caps;
+
+ mlx4_dbg(dev, "QP Rate-Limit: #rates %d, unit/val max %d/%d, min %d/%d\n",
+ rl_caps->num_rates, rl_caps->max_unit, rl_caps->max_val,
+ rl_caps->min_unit, rl_caps->min_val);
+ }
+
dump_dev_cap_flags(dev, dev_cap->flags);
dump_dev_cap_flags2(dev, dev_cap->flags2);
}
@@ -1075,6 +1101,7 @@
u64 flags;
int err = 0;
u8 field;
+ u16 field16;
u32 bmme_flags, field32;
int real_port;
int slave_port;
@@ -1158,6 +1185,10 @@
field &= 0xfe;
MLX4_PUT(outbox->buf, field, QUERY_DEV_CAP_ECN_QCN_VER_OFFSET);
+ /* turn off QP max-rate limiting for guests */
+ field16 = 0;
+ MLX4_PUT(outbox->buf, field16, QUERY_DEV_CAP_QP_RATE_LIMIT_NUM_OFFSET);
+
return 0;
}
diff --git a/drivers/net/ethernet/mellanox/mlx4/fw.h b/drivers/net/ethernet/mellanox/mlx4/fw.h
index f44f7f6..863655b 100644
--- a/drivers/net/ethernet/mellanox/mlx4/fw.h
+++ b/drivers/net/ethernet/mellanox/mlx4/fw.h
@@ -127,6 +127,7 @@
u32 max_counters;
u32 dmfs_high_rate_qpn_base;
u32 dmfs_high_rate_qpn_range;
+ struct mlx4_rate_limit_caps rl_caps;
struct mlx4_port_cap port_cap[MLX4_MAX_PORTS + 1];
};
diff --git a/drivers/net/ethernet/mellanox/mlx4/main.c b/drivers/net/ethernet/mellanox/mlx4/main.c
index 7e48722..43aa767 100644
--- a/drivers/net/ethernet/mellanox/mlx4/main.c
+++ b/drivers/net/ethernet/mellanox/mlx4/main.c
@@ -489,6 +489,8 @@
dev->caps.dmfs_high_rate_qpn_range = MLX4_A0_STEERING_TABLE_SIZE;
}
+ dev->caps.rl_caps = dev_cap->rl_caps;
+
dev->caps.reserved_qps_cnt[MLX4_QP_REGION_RSS_RAW_ETH] =
dev->caps.dmfs_high_rate_qpn_range;
diff --git a/drivers/net/ethernet/mellanox/mlx4/qp.c b/drivers/net/ethernet/mellanox/mlx4/qp.c
index eda29db..69e4462 100644
--- a/drivers/net/ethernet/mellanox/mlx4/qp.c
+++ b/drivers/net/ethernet/mellanox/mlx4/qp.c
@@ -442,6 +442,11 @@
cmd->qp_context.param3 |= cpu_to_be32(MLX4_STRIP_VLAN);
}
+ if (attr & MLX4_UPDATE_QP_RATE_LIMIT) {
+ qp_mask |= 1ULL << MLX4_UPD_QP_MASK_RATE_LIMIT;
+ cmd->qp_context.rate_limit_params = cpu_to_be16((params->rate_unit << 14) | params->rate_val);
+ }
+
cmd->primary_addr_path_mask = cpu_to_be64(pri_addr_path_mask);
cmd->qp_mask = cpu_to_be64(qp_mask);
diff --git a/drivers/net/ethernet/mellanox/mlx4/resource_tracker.c b/drivers/net/ethernet/mellanox/mlx4/resource_tracker.c
index d43e259..c258f86 100644
--- a/drivers/net/ethernet/mellanox/mlx4/resource_tracker.c
+++ b/drivers/net/ethernet/mellanox/mlx4/resource_tracker.c
@@ -2947,8 +2947,12 @@
qp_type = (be32_to_cpu(qp_ctx->flags) >> 16) & 0xff;
optpar = be32_to_cpu(*(__be32 *) inbox->buf);
- if (slave != mlx4_master_func_num(dev))
+ if (slave != mlx4_master_func_num(dev)) {
qp_ctx->params2 &= ~MLX4_QP_BIT_FPP;
+ /* setting QP rate-limit is disallowed for VFs */
+ if (qp_ctx->rate_limit_params)
+ return -EPERM;
+ }
switch (qp_type) {
case MLX4_QP_ST_RC: