| /* |
| em28xx-cards.c - driver for Empia EM2800/EM2820/2840 USB |
| video capture devices |
| |
| Copyright (C) 2005 Ludovico Cavedon <cavedon@sssup.it> |
| Markus Rechberger <mrechberger@gmail.com> |
| Mauro Carvalho Chehab <mchehab@infradead.org> |
| Sascha Sommer <saschasommer@freenet.de> |
| Copyright (C) 2012 Frank Schäfer <fschaefer.oss@googlemail.com> |
| |
| This program is free software; you can redistribute it and/or modify |
| it under the terms of the GNU General Public License as published by |
| the Free Software Foundation; either version 2 of the License, or |
| (at your option) any later version. |
| |
| This program is distributed in the hope that it will be useful, |
| but WITHOUT ANY WARRANTY; without even the implied warranty of |
| MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| GNU General Public License for more details. |
| |
| You should have received a copy of the GNU General Public License |
| along with this program; if not, write to the Free Software |
| Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. |
| */ |
| |
| #include <linux/init.h> |
| #include <linux/module.h> |
| #include <linux/slab.h> |
| #include <linux/delay.h> |
| #include <linux/i2c.h> |
| #include <linux/usb.h> |
| #include <media/tuner.h> |
| #include <media/msp3400.h> |
| #include <media/saa7115.h> |
| #include <media/tvp5150.h> |
| #include <media/tvaudio.h> |
| #include <media/i2c-addr.h> |
| #include <media/tveeprom.h> |
| #include <media/v4l2-clk.h> |
| #include <media/v4l2-common.h> |
| |
| #include "em28xx.h" |
| |
| #define DRIVER_NAME "em28xx" |
| |
| static int tuner = -1; |
| module_param(tuner, int, 0444); |
| MODULE_PARM_DESC(tuner, "tuner type"); |
| |
| static unsigned int disable_ir; |
| module_param(disable_ir, int, 0444); |
| MODULE_PARM_DESC(disable_ir, "disable infrared remote support"); |
| |
| static unsigned int disable_usb_speed_check; |
| module_param(disable_usb_speed_check, int, 0444); |
| MODULE_PARM_DESC(disable_usb_speed_check, |
| "override min bandwidth requirement of 480M bps"); |
| |
| static unsigned int card[] = {[0 ... (EM28XX_MAXBOARDS - 1)] = -1U }; |
| module_param_array(card, int, NULL, 0444); |
| MODULE_PARM_DESC(card, "card type"); |
| |
| static int usb_xfer_mode = -1; |
| module_param(usb_xfer_mode, int, 0444); |
| MODULE_PARM_DESC(usb_xfer_mode, |
| "USB transfer mode for frame data (-1 = auto, 0 = prefer isoc, 1 = prefer bulk)"); |
| |
| |
| /* Bitmask marking allocated devices from 0 to EM28XX_MAXBOARDS - 1 */ |
| static unsigned long em28xx_devused; |
| |
| struct em28xx_hash_table { |
| unsigned long hash; |
| unsigned int model; |
| unsigned int tuner; |
| }; |
| |
| static void em28xx_pre_card_setup(struct em28xx *dev); |
| |
| /* |
| * Reset sequences for analog/digital modes |
| */ |
| |
| /* Reset for the most [analog] boards */ |
| static struct em28xx_reg_seq default_analog[] = { |
| {EM2820_R08_GPIO_CTRL, 0x6d, ~EM_GPIO_4, 10}, |
| { -1, -1, -1, -1}, |
| }; |
| |
| /* Reset for the most [digital] boards */ |
| static struct em28xx_reg_seq default_digital[] = { |
| {EM2820_R08_GPIO_CTRL, 0x6e, ~EM_GPIO_4, 10}, |
| { -1, -1, -1, -1}, |
| }; |
| |
| /* Board Hauppauge WinTV HVR 900 analog */ |
| static struct em28xx_reg_seq hauppauge_wintv_hvr_900_analog[] = { |
| {EM2820_R08_GPIO_CTRL, 0x2d, ~EM_GPIO_4, 10}, |
| { 0x05, 0xff, 0x10, 10}, |
| { -1, -1, -1, -1}, |
| }; |
| |
| /* Board Hauppauge WinTV HVR 900 digital */ |
| static struct em28xx_reg_seq hauppauge_wintv_hvr_900_digital[] = { |
| {EM2820_R08_GPIO_CTRL, 0x2e, ~EM_GPIO_4, 10}, |
| {EM2880_R04_GPO, 0x04, 0x0f, 10}, |
| {EM2880_R04_GPO, 0x0c, 0x0f, 10}, |
| { -1, -1, -1, -1}, |
| }; |
| |
| /* Board Hauppauge WinTV HVR 900 (R2) digital */ |
| static struct em28xx_reg_seq hauppauge_wintv_hvr_900R2_digital[] = { |
| {EM2820_R08_GPIO_CTRL, 0x2e, ~EM_GPIO_4, 10}, |
| {EM2880_R04_GPO, 0x0c, 0x0f, 10}, |
| { -1, -1, -1, -1}, |
| }; |
| |
| /* Boards - EM2880 MSI DIGIVOX AD and EM2880_BOARD_MSI_DIGIVOX_AD_II */ |
| static struct em28xx_reg_seq em2880_msi_digivox_ad_analog[] = { |
| {EM2820_R08_GPIO_CTRL, 0x69, ~EM_GPIO_4, 10}, |
| { -1, -1, -1, -1}, |
| }; |
| |
| /* Boards - EM2880 MSI DIGIVOX AD and EM2880_BOARD_MSI_DIGIVOX_AD_II */ |
| |
| /* Board - EM2870 Kworld 355u |
| Analog - No input analog */ |
| |
| /* Board - EM2882 Kworld 315U digital */ |
| static struct em28xx_reg_seq em2882_kworld_315u_digital[] = { |
| {EM2820_R08_GPIO_CTRL, 0xff, 0xff, 10}, |
| {EM2820_R08_GPIO_CTRL, 0xfe, 0xff, 10}, |
| {EM2880_R04_GPO, 0x04, 0xff, 10}, |
| {EM2880_R04_GPO, 0x0c, 0xff, 10}, |
| {EM2820_R08_GPIO_CTRL, 0x7e, 0xff, 10}, |
| { -1, -1, -1, -1}, |
| }; |
| |
| static struct em28xx_reg_seq em2882_kworld_315u_tuner_gpio[] = { |
| {EM2880_R04_GPO, 0x08, 0xff, 10}, |
| {EM2880_R04_GPO, 0x0c, 0xff, 10}, |
| {EM2880_R04_GPO, 0x08, 0xff, 10}, |
| {EM2880_R04_GPO, 0x0c, 0xff, 10}, |
| { -1, -1, -1, -1}, |
| }; |
| |
| static struct em28xx_reg_seq kworld_330u_analog[] = { |
| {EM2820_R08_GPIO_CTRL, 0x6d, ~EM_GPIO_4, 10}, |
| {EM2880_R04_GPO, 0x00, 0xff, 10}, |
| { -1, -1, -1, -1}, |
| }; |
| |
| static struct em28xx_reg_seq kworld_330u_digital[] = { |
| {EM2820_R08_GPIO_CTRL, 0x6e, ~EM_GPIO_4, 10}, |
| {EM2880_R04_GPO, 0x08, 0xff, 10}, |
| { -1, -1, -1, -1}, |
| }; |
| |
| /* Evga inDtube |
| GPIO0 - Enable digital power (s5h1409) - low to enable |
| GPIO1 - Enable analog power (tvp5150/emp202) - low to enable |
| GPIO4 - xc3028 reset |
| GOP3 - s5h1409 reset |
| */ |
| static struct em28xx_reg_seq evga_indtube_analog[] = { |
| {EM2820_R08_GPIO_CTRL, 0x79, 0xff, 60}, |
| { -1, -1, -1, -1}, |
| }; |
| |
| static struct em28xx_reg_seq evga_indtube_digital[] = { |
| {EM2820_R08_GPIO_CTRL, 0x7a, 0xff, 1}, |
| {EM2880_R04_GPO, 0x04, 0xff, 10}, |
| {EM2880_R04_GPO, 0x0c, 0xff, 1}, |
| { -1, -1, -1, -1}, |
| }; |
| |
| /* |
| * KWorld PlusTV 340U and UB435-Q (ATSC) GPIOs map: |
| * EM_GPIO_0 - currently unknown |
| * EM_GPIO_1 - LED disable/enable (1 = off, 0 = on) |
| * EM_GPIO_2 - currently unknown |
| * EM_GPIO_3 - currently unknown |
| * EM_GPIO_4 - TDA18271HD/C1 tuner (1 = active, 0 = in reset) |
| * EM_GPIO_5 - LGDT3304 ATSC/QAM demod (1 = active, 0 = in reset) |
| * EM_GPIO_6 - currently unknown |
| * EM_GPIO_7 - currently unknown |
| */ |
| static struct em28xx_reg_seq kworld_a340_digital[] = { |
| {EM2820_R08_GPIO_CTRL, 0x6d, ~EM_GPIO_4, 10}, |
| { -1, -1, -1, -1}, |
| }; |
| |
| /* Pinnacle Hybrid Pro eb1a:2881 */ |
| static struct em28xx_reg_seq pinnacle_hybrid_pro_analog[] = { |
| {EM2820_R08_GPIO_CTRL, 0xfd, ~EM_GPIO_4, 10}, |
| { -1, -1, -1, -1}, |
| }; |
| |
| static struct em28xx_reg_seq pinnacle_hybrid_pro_digital[] = { |
| {EM2820_R08_GPIO_CTRL, 0x6e, ~EM_GPIO_4, 10}, |
| {EM2880_R04_GPO, 0x04, 0xff, 100},/* zl10353 reset */ |
| {EM2880_R04_GPO, 0x0c, 0xff, 1}, |
| { -1, -1, -1, -1}, |
| }; |
| |
| static struct em28xx_reg_seq terratec_cinergy_USB_XS_FR_analog[] = { |
| {EM2820_R08_GPIO_CTRL, 0x6d, ~EM_GPIO_4, 10}, |
| {EM2880_R04_GPO, 0x00, 0xff, 10}, |
| { -1, -1, -1, -1}, |
| }; |
| |
| static struct em28xx_reg_seq terratec_cinergy_USB_XS_FR_digital[] = { |
| {EM2820_R08_GPIO_CTRL, 0x6e, ~EM_GPIO_4, 10}, |
| {EM2880_R04_GPO, 0x08, 0xff, 10}, |
| { -1, -1, -1, -1}, |
| }; |
| |
| /* eb1a:2868 Reddo DVB-C USB TV Box |
| GPIO4 - CU1216L NIM |
| Other GPIOs seems to be don't care. */ |
| static struct em28xx_reg_seq reddo_dvb_c_usb_box[] = { |
| {EM2820_R08_GPIO_CTRL, 0xfe, 0xff, 10}, |
| {EM2820_R08_GPIO_CTRL, 0xde, 0xff, 10}, |
| {EM2820_R08_GPIO_CTRL, 0xfe, 0xff, 10}, |
| {EM2820_R08_GPIO_CTRL, 0xff, 0xff, 10}, |
| {EM2820_R08_GPIO_CTRL, 0x7f, 0xff, 10}, |
| {EM2820_R08_GPIO_CTRL, 0x6f, 0xff, 10}, |
| {EM2820_R08_GPIO_CTRL, 0xff, 0xff, 10}, |
| { -1, -1, -1, -1}, |
| }; |
| |
| /* Callback for the most boards */ |
| static struct em28xx_reg_seq default_tuner_gpio[] = { |
| {EM2820_R08_GPIO_CTRL, EM_GPIO_4, EM_GPIO_4, 10}, |
| {EM2820_R08_GPIO_CTRL, 0, EM_GPIO_4, 10}, |
| {EM2820_R08_GPIO_CTRL, EM_GPIO_4, EM_GPIO_4, 10}, |
| { -1, -1, -1, -1}, |
| }; |
| |
| /* Mute/unmute */ |
| static struct em28xx_reg_seq compro_unmute_tv_gpio[] = { |
| {EM2820_R08_GPIO_CTRL, 5, 7, 10}, |
| { -1, -1, -1, -1}, |
| }; |
| |
| static struct em28xx_reg_seq compro_unmute_svid_gpio[] = { |
| {EM2820_R08_GPIO_CTRL, 4, 7, 10}, |
| { -1, -1, -1, -1}, |
| }; |
| |
| static struct em28xx_reg_seq compro_mute_gpio[] = { |
| {EM2820_R08_GPIO_CTRL, 6, 7, 10}, |
| { -1, -1, -1, -1}, |
| }; |
| |
| /* Terratec AV350 */ |
| static struct em28xx_reg_seq terratec_av350_mute_gpio[] = { |
| {EM2820_R08_GPIO_CTRL, 0xff, 0x7f, 10}, |
| { -1, -1, -1, -1}, |
| }; |
| |
| static struct em28xx_reg_seq terratec_av350_unmute_gpio[] = { |
| {EM2820_R08_GPIO_CTRL, 0xff, 0xff, 10}, |
| { -1, -1, -1, -1}, |
| }; |
| |
| static struct em28xx_reg_seq silvercrest_reg_seq[] = { |
| {EM2820_R08_GPIO_CTRL, 0xff, 0xff, 10}, |
| {EM2820_R08_GPIO_CTRL, 0x01, 0xf7, 10}, |
| { -1, -1, -1, -1}, |
| }; |
| |
| static struct em28xx_reg_seq vc211a_enable[] = { |
| {EM2820_R08_GPIO_CTRL, 0xff, 0x07, 10}, |
| {EM2820_R08_GPIO_CTRL, 0xff, 0x0f, 10}, |
| {EM2820_R08_GPIO_CTRL, 0xff, 0x0b, 10}, |
| { -1, -1, -1, -1}, |
| }; |
| |
| static struct em28xx_reg_seq dikom_dk300_digital[] = { |
| {EM2820_R08_GPIO_CTRL, 0x6e, ~EM_GPIO_4, 10}, |
| {EM2880_R04_GPO, 0x08, 0xff, 10}, |
| { -1, -1, -1, -1}, |
| }; |
| |
| |
| /* Reset for the most [digital] boards */ |
| static struct em28xx_reg_seq leadership_digital[] = { |
| {EM2874_R80_GPIO_P0_CTRL, 0x70, 0xff, 10}, |
| { -1, -1, -1, -1}, |
| }; |
| |
| static struct em28xx_reg_seq leadership_reset[] = { |
| {EM2874_R80_GPIO_P0_CTRL, 0xf0, 0xff, 10}, |
| {EM2874_R80_GPIO_P0_CTRL, 0xb0, 0xff, 10}, |
| {EM2874_R80_GPIO_P0_CTRL, 0xf0, 0xff, 10}, |
| { -1, -1, -1, -1}, |
| }; |
| |
| /* 2013:024f PCTV nanoStick T2 290e |
| * GPIO_6 - demod reset |
| * GPIO_7 - LED |
| */ |
| static struct em28xx_reg_seq pctv_290e[] = { |
| {EM2874_R80_GPIO_P0_CTRL, 0x00, 0xff, 80}, |
| {EM2874_R80_GPIO_P0_CTRL, 0x40, 0xff, 80}, /* GPIO_6 = 1 */ |
| {EM2874_R80_GPIO_P0_CTRL, 0xc0, 0xff, 80}, /* GPIO_7 = 1 */ |
| { -1, -1, -1, -1}, |
| }; |
| |
| #if 0 |
| static struct em28xx_reg_seq terratec_h5_gpio[] = { |
| {EM2820_R08_GPIO_CTRL, 0xff, 0xff, 10}, |
| {EM2874_R80_GPIO_P0_CTRL, 0xf6, 0xff, 100}, |
| {EM2874_R80_GPIO_P0_CTRL, 0xf2, 0xff, 50}, |
| {EM2874_R80_GPIO_P0_CTRL, 0xf6, 0xff, 50}, |
| { -1, -1, -1, -1}, |
| }; |
| |
| static struct em28xx_reg_seq terratec_h5_digital[] = { |
| {EM2874_R80_GPIO_P0_CTRL, 0xf6, 0xff, 10}, |
| {EM2874_R80_GPIO_P0_CTRL, 0xe6, 0xff, 100}, |
| {EM2874_R80_GPIO_P0_CTRL, 0xa6, 0xff, 10}, |
| { -1, -1, -1, -1}, |
| }; |
| #endif |
| |
| /* 2013:024f PCTV DVB-S2 Stick 460e |
| * GPIO_0 - POWER_ON |
| * GPIO_1 - BOOST |
| * GPIO_2 - VUV_LNB (red LED) |
| * GPIO_3 - EXT_12V |
| * GPIO_4 - INT_DEM (DEMOD GPIO_0) |
| * GPIO_5 - INT_LNB |
| * GPIO_6 - RESET_DEM |
| * GPIO_7 - LED (green LED) |
| */ |
| static struct em28xx_reg_seq pctv_460e[] = { |
| {EM2874_R80_GPIO_P0_CTRL, 0x01, 0xff, 50}, |
| { 0x0d, 0xff, 0xff, 50}, |
| {EM2874_R80_GPIO_P0_CTRL, 0x41, 0xff, 50}, /* GPIO_6=1 */ |
| { 0x0d, 0x42, 0xff, 50}, |
| {EM2874_R80_GPIO_P0_CTRL, 0x61, 0xff, 50}, /* GPIO_5=1 */ |
| { -1, -1, -1, -1}, |
| }; |
| |
| static struct em28xx_reg_seq c3tech_digital_duo_digital[] = { |
| {EM2874_R80_GPIO_P0_CTRL, 0xff, 0xff, 10}, |
| {EM2874_R80_GPIO_P0_CTRL, 0xfd, 0xff, 10}, /* xc5000 reset */ |
| {EM2874_R80_GPIO_P0_CTRL, 0xf9, 0xff, 35}, |
| {EM2874_R80_GPIO_P0_CTRL, 0xfd, 0xff, 10}, |
| {EM2874_R80_GPIO_P0_CTRL, 0xff, 0xff, 10}, |
| {EM2874_R80_GPIO_P0_CTRL, 0xfe, 0xff, 10}, |
| {EM2874_R80_GPIO_P0_CTRL, 0xbe, 0xff, 10}, |
| {EM2874_R80_GPIO_P0_CTRL, 0xfe, 0xff, 20}, |
| { -1, -1, -1, -1}, |
| }; |
| |
| #if 0 |
| static struct em28xx_reg_seq hauppauge_930c_gpio[] = { |
| {EM2874_R80_GPIO_P0_CTRL, 0x6f, 0xff, 10}, |
| {EM2874_R80_GPIO_P0_CTRL, 0x4f, 0xff, 10}, /* xc5000 reset */ |
| {EM2874_R80_GPIO_P0_CTRL, 0x6f, 0xff, 10}, |
| {EM2874_R80_GPIO_P0_CTRL, 0x4f, 0xff, 10}, |
| { -1, -1, -1, -1}, |
| }; |
| |
| static struct em28xx_reg_seq hauppauge_930c_digital[] = { |
| {EM2874_R80_GPIO_P0_CTRL, 0xf6, 0xff, 10}, |
| {EM2874_R80_GPIO_P0_CTRL, 0xe6, 0xff, 100}, |
| {EM2874_R80_GPIO_P0_CTRL, 0xa6, 0xff, 10}, |
| { -1, -1, -1, -1}, |
| }; |
| #endif |
| |
| /* 1b80:e425 MaxMedia UB425-TC |
| * 1b80:e1cc Delock 61959 |
| * GPIO_6 - demod reset, 0=active |
| * GPIO_7 - LED, 0=active |
| */ |
| static struct em28xx_reg_seq maxmedia_ub425_tc[] = { |
| {EM2874_R80_GPIO_P0_CTRL, 0x83, 0xff, 100}, |
| {EM2874_R80_GPIO_P0_CTRL, 0xc3, 0xff, 100}, /* GPIO_6 = 1 */ |
| {EM2874_R80_GPIO_P0_CTRL, 0x43, 0xff, 000}, /* GPIO_7 = 0 */ |
| { -1, -1, -1, -1}, |
| }; |
| |
| /* 2304:0242 PCTV QuatroStick (510e) |
| * GPIO_2: decoder reset, 0=active |
| * GPIO_4: decoder suspend, 0=active |
| * GPIO_6: demod reset, 0=active |
| * GPIO_7: LED, 1=active |
| */ |
| static struct em28xx_reg_seq pctv_510e[] = { |
| {EM2874_R80_GPIO_P0_CTRL, 0x10, 0xff, 100}, |
| {EM2874_R80_GPIO_P0_CTRL, 0x14, 0xff, 100}, /* GPIO_2 = 1 */ |
| {EM2874_R80_GPIO_P0_CTRL, 0x54, 0xff, 050}, /* GPIO_6 = 1 */ |
| { -1, -1, -1, -1}, |
| }; |
| |
| /* 2013:0251 PCTV QuatroStick nano (520e) |
| * GPIO_2: decoder reset, 0=active |
| * GPIO_4: decoder suspend, 0=active |
| * GPIO_6: demod reset, 0=active |
| * GPIO_7: LED, 1=active |
| */ |
| static struct em28xx_reg_seq pctv_520e[] = { |
| {EM2874_R80_GPIO_P0_CTRL, 0x10, 0xff, 100}, |
| {EM2874_R80_GPIO_P0_CTRL, 0x14, 0xff, 100}, /* GPIO_2 = 1 */ |
| {EM2874_R80_GPIO_P0_CTRL, 0x54, 0xff, 050}, /* GPIO_6 = 1 */ |
| {EM2874_R80_GPIO_P0_CTRL, 0xd4, 0xff, 000}, /* GPIO_7 = 1 */ |
| { -1, -1, -1, -1}, |
| }; |
| |
| /* |
| * Board definitions |
| */ |
| struct em28xx_board em28xx_boards[] = { |
| [EM2750_BOARD_UNKNOWN] = { |
| .name = "EM2710/EM2750/EM2751 webcam grabber", |
| .xclk = EM28XX_XCLK_FREQUENCY_20MHZ, |
| .tuner_type = TUNER_ABSENT, |
| .is_webcam = 1, |
| .input = { { |
| .type = EM28XX_VMUX_COMPOSITE1, |
| .vmux = 0, |
| .amux = EM28XX_AMUX_VIDEO, |
| .gpio = silvercrest_reg_seq, |
| } }, |
| }, |
| [EM2800_BOARD_UNKNOWN] = { |
| .name = "Unknown EM2800 video grabber", |
| .is_em2800 = 1, |
| .tda9887_conf = TDA9887_PRESENT, |
| .decoder = EM28XX_SAA711X, |
| .tuner_type = TUNER_ABSENT, |
| .input = { { |
| .type = EM28XX_VMUX_COMPOSITE1, |
| .vmux = SAA7115_COMPOSITE0, |
| .amux = EM28XX_AMUX_LINE_IN, |
| }, { |
| .type = EM28XX_VMUX_SVIDEO, |
| .vmux = SAA7115_SVIDEO3, |
| .amux = EM28XX_AMUX_LINE_IN, |
| } }, |
| }, |
| [EM2820_BOARD_UNKNOWN] = { |
| .name = "Unknown EM2750/28xx video grabber", |
| .tuner_type = TUNER_ABSENT, |
| .is_webcam = 1, /* To enable sensor probe */ |
| }, |
| [EM2750_BOARD_DLCW_130] = { |
| /* Beijing Huaqi Information Digital Technology Co., Ltd */ |
| .name = "Huaqi DLCW-130", |
| .valid = EM28XX_BOARD_NOT_VALIDATED, |
| .xclk = EM28XX_XCLK_FREQUENCY_48MHZ, |
| .tuner_type = TUNER_ABSENT, |
| .is_webcam = 1, |
| .input = { { |
| .type = EM28XX_VMUX_COMPOSITE1, |
| .vmux = 0, |
| .amux = EM28XX_AMUX_VIDEO, |
| } }, |
| }, |
| [EM2820_BOARD_KWORLD_PVRTV2800RF] = { |
| .name = "Kworld PVR TV 2800 RF", |
| .tuner_type = TUNER_TEMIC_PAL, |
| .tda9887_conf = TDA9887_PRESENT, |
| .decoder = EM28XX_SAA711X, |
| .input = { { |
| .type = EM28XX_VMUX_COMPOSITE1, |
| .vmux = SAA7115_COMPOSITE0, |
| .amux = EM28XX_AMUX_LINE_IN, |
| }, { |
| .type = EM28XX_VMUX_SVIDEO, |
| .vmux = SAA7115_SVIDEO3, |
| .amux = EM28XX_AMUX_LINE_IN, |
| } }, |
| }, |
| [EM2820_BOARD_GADMEI_TVR200] = { |
| .name = "Gadmei TVR200", |
| .tuner_type = TUNER_LG_PAL_NEW_TAPC, |
| .tda9887_conf = TDA9887_PRESENT, |
| .decoder = EM28XX_SAA711X, |
| .input = { { |
| .type = EM28XX_VMUX_TELEVISION, |
| .vmux = SAA7115_COMPOSITE2, |
| .amux = EM28XX_AMUX_LINE_IN, |
| }, { |
| .type = EM28XX_VMUX_COMPOSITE1, |
| .vmux = SAA7115_COMPOSITE0, |
| .amux = EM28XX_AMUX_LINE_IN, |
| }, { |
| .type = EM28XX_VMUX_SVIDEO, |
| .vmux = SAA7115_SVIDEO3, |
| .amux = EM28XX_AMUX_LINE_IN, |
| } }, |
| }, |
| [EM2820_BOARD_TERRATEC_CINERGY_250] = { |
| .name = "Terratec Cinergy 250 USB", |
| .tuner_type = TUNER_LG_PAL_NEW_TAPC, |
| .has_ir_i2c = 1, |
| .tda9887_conf = TDA9887_PRESENT, |
| .decoder = EM28XX_SAA711X, |
| .input = { { |
| .type = EM28XX_VMUX_TELEVISION, |
| .vmux = SAA7115_COMPOSITE2, |
| .amux = EM28XX_AMUX_VIDEO, |
| }, { |
| .type = EM28XX_VMUX_COMPOSITE1, |
| .vmux = SAA7115_COMPOSITE0, |
| .amux = EM28XX_AMUX_LINE_IN, |
| }, { |
| .type = EM28XX_VMUX_SVIDEO, |
| .vmux = SAA7115_SVIDEO3, |
| .amux = EM28XX_AMUX_LINE_IN, |
| } }, |
| }, |
| [EM2820_BOARD_PINNACLE_USB_2] = { |
| .name = "Pinnacle PCTV USB 2", |
| .tuner_type = TUNER_LG_PAL_NEW_TAPC, |
| .has_ir_i2c = 1, |
| .tda9887_conf = TDA9887_PRESENT, |
| .decoder = EM28XX_SAA711X, |
| .input = { { |
| .type = EM28XX_VMUX_TELEVISION, |
| .vmux = SAA7115_COMPOSITE2, |
| .amux = EM28XX_AMUX_VIDEO, |
| }, { |
| .type = EM28XX_VMUX_COMPOSITE1, |
| .vmux = SAA7115_COMPOSITE0, |
| .amux = EM28XX_AMUX_LINE_IN, |
| }, { |
| .type = EM28XX_VMUX_SVIDEO, |
| .vmux = SAA7115_SVIDEO3, |
| .amux = EM28XX_AMUX_LINE_IN, |
| } }, |
| }, |
| [EM2820_BOARD_HAUPPAUGE_WINTV_USB_2] = { |
| .name = "Hauppauge WinTV USB 2", |
| .tuner_type = TUNER_PHILIPS_FM1236_MK3, |
| .tda9887_conf = TDA9887_PRESENT | |
| TDA9887_PORT1_ACTIVE | |
| TDA9887_PORT2_ACTIVE, |
| .decoder = EM28XX_TVP5150, |
| .has_msp34xx = 1, |
| .has_ir_i2c = 1, |
| .input = { { |
| .type = EM28XX_VMUX_TELEVISION, |
| .vmux = TVP5150_COMPOSITE0, |
| .amux = MSP_INPUT_DEFAULT, |
| }, { |
| .type = EM28XX_VMUX_SVIDEO, |
| .vmux = TVP5150_SVIDEO, |
| .amux = MSP_INPUT(MSP_IN_SCART1, MSP_IN_TUNER1, |
| MSP_DSP_IN_SCART, MSP_DSP_IN_SCART), |
| } }, |
| }, |
| [EM2820_BOARD_DLINK_USB_TV] = { |
| .name = "D-Link DUB-T210 TV Tuner", |
| .valid = EM28XX_BOARD_NOT_VALIDATED, |
| .tuner_type = TUNER_LG_PAL_NEW_TAPC, |
| .tda9887_conf = TDA9887_PRESENT, |
| .decoder = EM28XX_SAA711X, |
| .input = { { |
| .type = EM28XX_VMUX_TELEVISION, |
| .vmux = SAA7115_COMPOSITE2, |
| .amux = EM28XX_AMUX_LINE_IN, |
| }, { |
| .type = EM28XX_VMUX_COMPOSITE1, |
| .vmux = SAA7115_COMPOSITE0, |
| .amux = EM28XX_AMUX_LINE_IN, |
| }, { |
| .type = EM28XX_VMUX_SVIDEO, |
| .vmux = SAA7115_SVIDEO3, |
| .amux = EM28XX_AMUX_LINE_IN, |
| } }, |
| }, |
| [EM2820_BOARD_HERCULES_SMART_TV_USB2] = { |
| .name = "Hercules Smart TV USB 2.0", |
| .valid = EM28XX_BOARD_NOT_VALIDATED, |
| .tuner_type = TUNER_LG_PAL_NEW_TAPC, |
| .tda9887_conf = TDA9887_PRESENT, |
| .decoder = EM28XX_SAA711X, |
| .input = { { |
| .type = EM28XX_VMUX_TELEVISION, |
| .vmux = SAA7115_COMPOSITE2, |
| .amux = EM28XX_AMUX_LINE_IN, |
| }, { |
| .type = EM28XX_VMUX_COMPOSITE1, |
| .vmux = SAA7115_COMPOSITE0, |
| .amux = EM28XX_AMUX_LINE_IN, |
| }, { |
| .type = EM28XX_VMUX_SVIDEO, |
| .vmux = SAA7115_SVIDEO3, |
| .amux = EM28XX_AMUX_LINE_IN, |
| } }, |
| }, |
| [EM2820_BOARD_PINNACLE_USB_2_FM1216ME] = { |
| .name = "Pinnacle PCTV USB 2 (Philips FM1216ME)", |
| .valid = EM28XX_BOARD_NOT_VALIDATED, |
| .tuner_type = TUNER_PHILIPS_FM1216ME_MK3, |
| .tda9887_conf = TDA9887_PRESENT, |
| .decoder = EM28XX_SAA711X, |
| .input = { { |
| .type = EM28XX_VMUX_TELEVISION, |
| .vmux = SAA7115_COMPOSITE2, |
| .amux = EM28XX_AMUX_VIDEO, |
| }, { |
| .type = EM28XX_VMUX_COMPOSITE1, |
| .vmux = SAA7115_COMPOSITE0, |
| .amux = EM28XX_AMUX_LINE_IN, |
| }, { |
| .type = EM28XX_VMUX_SVIDEO, |
| .vmux = SAA7115_SVIDEO3, |
| .amux = EM28XX_AMUX_LINE_IN, |
| } }, |
| }, |
| [EM2820_BOARD_GADMEI_UTV310] = { |
| .name = "Gadmei UTV310", |
| .valid = EM28XX_BOARD_NOT_VALIDATED, |
| .tuner_type = TUNER_TNF_5335MF, |
| .tda9887_conf = TDA9887_PRESENT, |
| .decoder = EM28XX_SAA711X, |
| .input = { { |
| .type = EM28XX_VMUX_TELEVISION, |
| .vmux = SAA7115_COMPOSITE1, |
| .amux = EM28XX_AMUX_LINE_IN, |
| }, { |
| .type = EM28XX_VMUX_COMPOSITE1, |
| .vmux = SAA7115_COMPOSITE0, |
| .amux = EM28XX_AMUX_LINE_IN, |
| }, { |
| .type = EM28XX_VMUX_SVIDEO, |
| .vmux = SAA7115_SVIDEO3, |
| .amux = EM28XX_AMUX_LINE_IN, |
| } }, |
| }, |
| [EM2820_BOARD_LEADTEK_WINFAST_USBII_DELUXE] = { |
| .name = "Leadtek Winfast USB II Deluxe", |
| .valid = EM28XX_BOARD_NOT_VALIDATED, |
| .tuner_type = TUNER_PHILIPS_FM1216ME_MK3, |
| .has_ir_i2c = 1, |
| .tvaudio_addr = 0x58, |
| .tda9887_conf = TDA9887_PRESENT | |
| TDA9887_PORT2_ACTIVE | |
| TDA9887_QSS, |
| .decoder = EM28XX_SAA711X, |
| .adecoder = EM28XX_TVAUDIO, |
| .input = { { |
| .type = EM28XX_VMUX_TELEVISION, |
| .vmux = SAA7115_COMPOSITE4, |
| .amux = EM28XX_AMUX_AUX, |
| }, { |
| .type = EM28XX_VMUX_COMPOSITE1, |
| .vmux = SAA7115_COMPOSITE5, |
| .amux = EM28XX_AMUX_LINE_IN, |
| }, { |
| .type = EM28XX_VMUX_SVIDEO, |
| .vmux = SAA7115_SVIDEO3, |
| .amux = EM28XX_AMUX_LINE_IN, |
| } }, |
| .radio = { |
| .type = EM28XX_RADIO, |
| .amux = EM28XX_AMUX_AUX, |
| } |
| }, |
| [EM2820_BOARD_VIDEOLOGY_20K14XUSB] = { |
| .name = "Videology 20K14XUSB USB2.0", |
| .valid = EM28XX_BOARD_NOT_VALIDATED, |
| .tuner_type = TUNER_ABSENT, |
| .is_webcam = 1, |
| .input = { { |
| .type = EM28XX_VMUX_COMPOSITE1, |
| .vmux = 0, |
| .amux = EM28XX_AMUX_VIDEO, |
| } }, |
| }, |
| [EM2820_BOARD_SILVERCREST_WEBCAM] = { |
| .name = "Silvercrest Webcam 1.3mpix", |
| .tuner_type = TUNER_ABSENT, |
| .is_webcam = 1, |
| .input = { { |
| .type = EM28XX_VMUX_COMPOSITE1, |
| .vmux = 0, |
| .amux = EM28XX_AMUX_VIDEO, |
| .gpio = silvercrest_reg_seq, |
| } }, |
| }, |
| [EM2821_BOARD_SUPERCOMP_USB_2] = { |
| .name = "Supercomp USB 2.0 TV", |
| .valid = EM28XX_BOARD_NOT_VALIDATED, |
| .tuner_type = TUNER_PHILIPS_FM1236_MK3, |
| .tda9887_conf = TDA9887_PRESENT | |
| TDA9887_PORT1_ACTIVE | |
| TDA9887_PORT2_ACTIVE, |
| .decoder = EM28XX_SAA711X, |
| .input = { { |
| .type = EM28XX_VMUX_TELEVISION, |
| .vmux = SAA7115_COMPOSITE2, |
| .amux = EM28XX_AMUX_LINE_IN, |
| }, { |
| .type = EM28XX_VMUX_COMPOSITE1, |
| .vmux = SAA7115_COMPOSITE0, |
| .amux = EM28XX_AMUX_VIDEO, |
| }, { |
| .type = EM28XX_VMUX_SVIDEO, |
| .vmux = SAA7115_SVIDEO3, |
| .amux = EM28XX_AMUX_LINE_IN, |
| } }, |
| }, |
| [EM2821_BOARD_USBGEAR_VD204] = { |
| .name = "Usbgear VD204v9", |
| .valid = EM28XX_BOARD_NOT_VALIDATED, |
| .tuner_type = TUNER_ABSENT, /* Capture only device */ |
| .decoder = EM28XX_SAA711X, |
| .input = { { |
| .type = EM28XX_VMUX_COMPOSITE1, |
| .vmux = SAA7115_COMPOSITE0, |
| .amux = EM28XX_AMUX_LINE_IN, |
| }, { |
| .type = EM28XX_VMUX_SVIDEO, |
| .vmux = SAA7115_SVIDEO3, |
| .amux = EM28XX_AMUX_LINE_IN, |
| } }, |
| }, |
| [EM2860_BOARD_NETGMBH_CAM] = { |
| /* Beijing Huaqi Information Digital Technology Co., Ltd */ |
| .name = "NetGMBH Cam", |
| .valid = EM28XX_BOARD_NOT_VALIDATED, |
| .tuner_type = TUNER_ABSENT, |
| .is_webcam = 1, |
| .input = { { |
| .type = EM28XX_VMUX_COMPOSITE1, |
| .vmux = 0, |
| .amux = EM28XX_AMUX_VIDEO, |
| } }, |
| }, |
| [EM2860_BOARD_TYPHOON_DVD_MAKER] = { |
| .name = "Typhoon DVD Maker", |
| .decoder = EM28XX_SAA711X, |
| .tuner_type = TUNER_ABSENT, /* Capture only device */ |
| .input = { { |
| .type = EM28XX_VMUX_COMPOSITE1, |
| .vmux = SAA7115_COMPOSITE0, |
| .amux = EM28XX_AMUX_LINE_IN, |
| }, { |
| .type = EM28XX_VMUX_SVIDEO, |
| .vmux = SAA7115_SVIDEO3, |
| .amux = EM28XX_AMUX_LINE_IN, |
| } }, |
| }, |
| [EM2860_BOARD_GADMEI_UTV330] = { |
| .name = "Gadmei UTV330", |
| .valid = EM28XX_BOARD_NOT_VALIDATED, |
| .tuner_type = TUNER_TNF_5335MF, |
| .tda9887_conf = TDA9887_PRESENT, |
| .decoder = EM28XX_SAA711X, |
| .input = { { |
| .type = EM28XX_VMUX_TELEVISION, |
| .vmux = SAA7115_COMPOSITE2, |
| .amux = EM28XX_AMUX_VIDEO, |
| }, { |
| .type = EM28XX_VMUX_COMPOSITE1, |
| .vmux = SAA7115_COMPOSITE0, |
| .amux = EM28XX_AMUX_LINE_IN, |
| }, { |
| .type = EM28XX_VMUX_SVIDEO, |
| .vmux = SAA7115_SVIDEO3, |
| .amux = EM28XX_AMUX_LINE_IN, |
| } }, |
| }, |
| [EM2861_BOARD_GADMEI_UTV330PLUS] = { |
| .name = "Gadmei UTV330+", |
| .tuner_type = TUNER_TNF_5335MF, |
| .tda9887_conf = TDA9887_PRESENT, |
| .ir_codes = RC_MAP_GADMEI_RM008Z, |
| .decoder = EM28XX_SAA711X, |
| .xclk = EM28XX_XCLK_FREQUENCY_12MHZ, |
| .input = { { |
| .type = EM28XX_VMUX_TELEVISION, |
| .vmux = SAA7115_COMPOSITE2, |
| .amux = EM28XX_AMUX_VIDEO, |
| }, { |
| .type = EM28XX_VMUX_COMPOSITE1, |
| .vmux = SAA7115_COMPOSITE0, |
| .amux = EM28XX_AMUX_LINE_IN, |
| }, { |
| .type = EM28XX_VMUX_SVIDEO, |
| .vmux = SAA7115_SVIDEO3, |
| .amux = EM28XX_AMUX_LINE_IN, |
| } }, |
| }, |
| [EM2860_BOARD_TERRATEC_HYBRID_XS] = { |
| .name = "Terratec Cinergy A Hybrid XS", |
| .valid = EM28XX_BOARD_NOT_VALIDATED, |
| .tuner_type = TUNER_XC2028, |
| .tuner_gpio = default_tuner_gpio, |
| .decoder = EM28XX_TVP5150, |
| |
| .input = { { |
| .type = EM28XX_VMUX_TELEVISION, |
| .vmux = TVP5150_COMPOSITE0, |
| .amux = EM28XX_AMUX_VIDEO, |
| .gpio = hauppauge_wintv_hvr_900_analog, |
| }, { |
| .type = EM28XX_VMUX_COMPOSITE1, |
| .vmux = TVP5150_COMPOSITE1, |
| .amux = EM28XX_AMUX_LINE_IN, |
| .gpio = hauppauge_wintv_hvr_900_analog, |
| }, { |
| .type = EM28XX_VMUX_SVIDEO, |
| .vmux = TVP5150_SVIDEO, |
| .amux = EM28XX_AMUX_LINE_IN, |
| .gpio = hauppauge_wintv_hvr_900_analog, |
| } }, |
| }, |
| [EM2861_BOARD_KWORLD_PVRTV_300U] = { |
| .name = "KWorld PVRTV 300U", |
| .valid = EM28XX_BOARD_NOT_VALIDATED, |
| .tuner_type = TUNER_XC2028, |
| .tuner_gpio = default_tuner_gpio, |
| .decoder = EM28XX_TVP5150, |
| .input = { { |
| .type = EM28XX_VMUX_TELEVISION, |
| .vmux = TVP5150_COMPOSITE0, |
| .amux = EM28XX_AMUX_VIDEO, |
| }, { |
| .type = EM28XX_VMUX_COMPOSITE1, |
| .vmux = TVP5150_COMPOSITE1, |
| .amux = EM28XX_AMUX_LINE_IN, |
| }, { |
| .type = EM28XX_VMUX_SVIDEO, |
| .vmux = TVP5150_SVIDEO, |
| .amux = EM28XX_AMUX_LINE_IN, |
| } }, |
| }, |
| [EM2861_BOARD_YAKUMO_MOVIE_MIXER] = { |
| .name = "Yakumo MovieMixer", |
| .tuner_type = TUNER_ABSENT, /* Capture only device */ |
| .decoder = EM28XX_TVP5150, |
| .input = { { |
| .type = EM28XX_VMUX_TELEVISION, |
| .vmux = TVP5150_COMPOSITE0, |
| .amux = EM28XX_AMUX_VIDEO, |
| }, { |
| .type = EM28XX_VMUX_COMPOSITE1, |
| .vmux = TVP5150_COMPOSITE1, |
| .amux = EM28XX_AMUX_LINE_IN, |
| }, { |
| .type = EM28XX_VMUX_SVIDEO, |
| .vmux = TVP5150_SVIDEO, |
| .amux = EM28XX_AMUX_LINE_IN, |
| } }, |
| }, |
| [EM2860_BOARD_TVP5150_REFERENCE_DESIGN] = { |
| .name = "EM2860/TVP5150 Reference Design", |
| .tuner_type = TUNER_ABSENT, /* Capture only device */ |
| .decoder = EM28XX_TVP5150, |
| .input = { { |
| .type = EM28XX_VMUX_COMPOSITE1, |
| .vmux = TVP5150_COMPOSITE1, |
| .amux = EM28XX_AMUX_LINE_IN, |
| }, { |
| .type = EM28XX_VMUX_SVIDEO, |
| .vmux = TVP5150_SVIDEO, |
| .amux = EM28XX_AMUX_LINE_IN, |
| } }, |
| }, |
| [EM2861_BOARD_PLEXTOR_PX_TV100U] = { |
| .name = "Plextor ConvertX PX-TV100U", |
| .tuner_type = TUNER_TNF_5335MF, |
| .xclk = EM28XX_XCLK_I2S_MSB_TIMING | |
| EM28XX_XCLK_FREQUENCY_12MHZ, |
| .tda9887_conf = TDA9887_PRESENT, |
| .decoder = EM28XX_TVP5150, |
| .has_msp34xx = 1, |
| .input = { { |
| .type = EM28XX_VMUX_TELEVISION, |
| .vmux = TVP5150_COMPOSITE0, |
| .amux = EM28XX_AMUX_LINE_IN, |
| .gpio = pinnacle_hybrid_pro_analog, |
| }, { |
| .type = EM28XX_VMUX_COMPOSITE1, |
| .vmux = TVP5150_COMPOSITE1, |
| .amux = EM28XX_AMUX_LINE_IN, |
| .gpio = pinnacle_hybrid_pro_analog, |
| }, { |
| .type = EM28XX_VMUX_SVIDEO, |
| .vmux = TVP5150_SVIDEO, |
| .amux = EM28XX_AMUX_LINE_IN, |
| .gpio = pinnacle_hybrid_pro_analog, |
| } }, |
| }, |
| |
| /* Those boards with em2870 are DVB Only*/ |
| |
| [EM2870_BOARD_TERRATEC_XS] = { |
| .name = "Terratec Cinergy T XS", |
| .valid = EM28XX_BOARD_NOT_VALIDATED, |
| .tuner_type = TUNER_XC2028, |
| .tuner_gpio = default_tuner_gpio, |
| }, |
| [EM2870_BOARD_TERRATEC_XS_MT2060] = { |
| .name = "Terratec Cinergy T XS (MT2060)", |
| .valid = EM28XX_BOARD_NOT_VALIDATED, |
| .tuner_type = TUNER_ABSENT, /* MT2060 */ |
| }, |
| [EM2870_BOARD_KWORLD_350U] = { |
| .name = "Kworld 350 U DVB-T", |
| .valid = EM28XX_BOARD_NOT_VALIDATED, |
| .tuner_type = TUNER_XC2028, |
| .tuner_gpio = default_tuner_gpio, |
| }, |
| [EM2870_BOARD_KWORLD_355U] = { |
| .name = "Kworld 355 U DVB-T", |
| .valid = EM28XX_BOARD_NOT_VALIDATED, |
| .tuner_type = TUNER_ABSENT, |
| .tuner_gpio = default_tuner_gpio, |
| .has_dvb = 1, |
| .dvb_gpio = default_digital, |
| }, |
| [EM2870_BOARD_PINNACLE_PCTV_DVB] = { |
| .name = "Pinnacle PCTV DVB-T", |
| .valid = EM28XX_BOARD_NOT_VALIDATED, |
| .tuner_type = TUNER_ABSENT, /* MT2060 */ |
| /* djh - I have serious doubts this is right... */ |
| .xclk = EM28XX_XCLK_IR_RC5_MODE | |
| EM28XX_XCLK_FREQUENCY_10MHZ, |
| }, |
| [EM2870_BOARD_COMPRO_VIDEOMATE] = { |
| .name = "Compro, VideoMate U3", |
| .valid = EM28XX_BOARD_NOT_VALIDATED, |
| .tuner_type = TUNER_ABSENT, /* MT2060 */ |
| }, |
| |
| [EM2880_BOARD_TERRATEC_HYBRID_XS_FR] = { |
| .name = "Terratec Hybrid XS Secam", |
| .has_msp34xx = 1, |
| .tuner_type = TUNER_XC2028, |
| .tuner_gpio = default_tuner_gpio, |
| .decoder = EM28XX_TVP5150, |
| .has_dvb = 1, |
| .dvb_gpio = terratec_cinergy_USB_XS_FR_digital, |
| .input = { { |
| .type = EM28XX_VMUX_TELEVISION, |
| .vmux = TVP5150_COMPOSITE0, |
| .amux = EM28XX_AMUX_VIDEO, |
| .gpio = terratec_cinergy_USB_XS_FR_analog, |
| }, { |
| .type = EM28XX_VMUX_COMPOSITE1, |
| .vmux = TVP5150_COMPOSITE1, |
| .amux = EM28XX_AMUX_LINE_IN, |
| .gpio = terratec_cinergy_USB_XS_FR_analog, |
| }, { |
| .type = EM28XX_VMUX_SVIDEO, |
| .vmux = TVP5150_SVIDEO, |
| .amux = EM28XX_AMUX_LINE_IN, |
| .gpio = terratec_cinergy_USB_XS_FR_analog, |
| } }, |
| }, |
| [EM2884_BOARD_TERRATEC_H5] = { |
| .name = "Terratec Cinergy H5", |
| .has_dvb = 1, |
| #if 0 |
| .tuner_type = TUNER_PHILIPS_TDA8290, |
| .tuner_addr = 0x41, |
| .dvb_gpio = terratec_h5_digital, /* FIXME: probably wrong */ |
| .tuner_gpio = terratec_h5_gpio, |
| #else |
| .tuner_type = TUNER_ABSENT, |
| #endif |
| .def_i2c_bus = 1, |
| .i2c_speed = EM28XX_I2C_CLK_WAIT_ENABLE | |
| EM28XX_I2C_FREQ_400_KHZ, |
| }, |
| [EM2884_BOARD_HAUPPAUGE_WINTV_HVR_930C] = { |
| .name = "Hauppauge WinTV HVR 930C", |
| .has_dvb = 1, |
| #if 0 /* FIXME: Add analog support */ |
| .tuner_type = TUNER_XC5000, |
| .tuner_addr = 0x41, |
| .dvb_gpio = hauppauge_930c_digital, |
| .tuner_gpio = hauppauge_930c_gpio, |
| #else |
| .tuner_type = TUNER_ABSENT, |
| #endif |
| .ir_codes = RC_MAP_HAUPPAUGE, |
| .def_i2c_bus = 1, |
| .i2c_speed = EM28XX_I2C_CLK_WAIT_ENABLE | |
| EM28XX_I2C_FREQ_400_KHZ, |
| }, |
| [EM2884_BOARD_C3TECH_DIGITAL_DUO] = { |
| .name = "C3 Tech Digital Duo HDTV/SDTV USB", |
| .has_dvb = 1, |
| /* FIXME: Add analog support - need a saa7136 driver */ |
| .tuner_type = TUNER_ABSENT, /* Digital-only TDA18271HD */ |
| .ir_codes = RC_MAP_EMPTY, |
| .def_i2c_bus = 1, |
| .i2c_speed = EM28XX_I2C_CLK_WAIT_ENABLE, |
| .dvb_gpio = c3tech_digital_duo_digital, |
| }, |
| [EM2884_BOARD_CINERGY_HTC_STICK] = { |
| .name = "Terratec Cinergy HTC Stick", |
| .has_dvb = 1, |
| .ir_codes = RC_MAP_NEC_TERRATEC_CINERGY_XS, |
| .tuner_type = TUNER_ABSENT, |
| .def_i2c_bus = 1, |
| .i2c_speed = EM28XX_I2C_CLK_WAIT_ENABLE | |
| EM28XX_I2C_FREQ_400_KHZ, |
| }, |
| [EM2880_BOARD_HAUPPAUGE_WINTV_HVR_900] = { |
| .name = "Hauppauge WinTV HVR 900", |
| .tda9887_conf = TDA9887_PRESENT, |
| .tuner_type = TUNER_XC2028, |
| .tuner_gpio = default_tuner_gpio, |
| .mts_firmware = 1, |
| .has_dvb = 1, |
| .dvb_gpio = hauppauge_wintv_hvr_900_digital, |
| .ir_codes = RC_MAP_HAUPPAUGE, |
| .decoder = EM28XX_TVP5150, |
| .input = { { |
| .type = EM28XX_VMUX_TELEVISION, |
| .vmux = TVP5150_COMPOSITE0, |
| .amux = EM28XX_AMUX_VIDEO, |
| .gpio = hauppauge_wintv_hvr_900_analog, |
| }, { |
| .type = EM28XX_VMUX_COMPOSITE1, |
| .vmux = TVP5150_COMPOSITE1, |
| .amux = EM28XX_AMUX_LINE_IN, |
| .gpio = hauppauge_wintv_hvr_900_analog, |
| }, { |
| .type = EM28XX_VMUX_SVIDEO, |
| .vmux = TVP5150_SVIDEO, |
| .amux = EM28XX_AMUX_LINE_IN, |
| .gpio = hauppauge_wintv_hvr_900_analog, |
| } }, |
| }, |
| [EM2880_BOARD_HAUPPAUGE_WINTV_HVR_900_R2] = { |
| .name = "Hauppauge WinTV HVR 900 (R2)", |
| .tda9887_conf = TDA9887_PRESENT, |
| .tuner_type = TUNER_XC2028, |
| .tuner_gpio = default_tuner_gpio, |
| .mts_firmware = 1, |
| .has_dvb = 1, |
| .dvb_gpio = hauppauge_wintv_hvr_900R2_digital, |
| .ir_codes = RC_MAP_HAUPPAUGE, |
| .decoder = EM28XX_TVP5150, |
| .input = { { |
| .type = EM28XX_VMUX_TELEVISION, |
| .vmux = TVP5150_COMPOSITE0, |
| .amux = EM28XX_AMUX_VIDEO, |
| .gpio = hauppauge_wintv_hvr_900_analog, |
| }, { |
| .type = EM28XX_VMUX_COMPOSITE1, |
| .vmux = TVP5150_COMPOSITE1, |
| .amux = EM28XX_AMUX_LINE_IN, |
| .gpio = hauppauge_wintv_hvr_900_analog, |
| }, { |
| .type = EM28XX_VMUX_SVIDEO, |
| .vmux = TVP5150_SVIDEO, |
| .amux = EM28XX_AMUX_LINE_IN, |
| .gpio = hauppauge_wintv_hvr_900_analog, |
| } }, |
| }, |
| [EM2883_BOARD_HAUPPAUGE_WINTV_HVR_850] = { |
| .name = "Hauppauge WinTV HVR 850", |
| .tuner_type = TUNER_XC2028, |
| .tuner_gpio = default_tuner_gpio, |
| .mts_firmware = 1, |
| .has_dvb = 1, |
| .dvb_gpio = hauppauge_wintv_hvr_900_digital, |
| .ir_codes = RC_MAP_HAUPPAUGE, |
| .decoder = EM28XX_TVP5150, |
| .input = { { |
| .type = EM28XX_VMUX_TELEVISION, |
| .vmux = TVP5150_COMPOSITE0, |
| .amux = EM28XX_AMUX_VIDEO, |
| .gpio = hauppauge_wintv_hvr_900_analog, |
| }, { |
| .type = EM28XX_VMUX_COMPOSITE1, |
| .vmux = TVP5150_COMPOSITE1, |
| .amux = EM28XX_AMUX_LINE_IN, |
| .gpio = hauppauge_wintv_hvr_900_analog, |
| }, { |
| .type = EM28XX_VMUX_SVIDEO, |
| .vmux = TVP5150_SVIDEO, |
| .amux = EM28XX_AMUX_LINE_IN, |
| .gpio = hauppauge_wintv_hvr_900_analog, |
| } }, |
| }, |
| [EM2883_BOARD_HAUPPAUGE_WINTV_HVR_950] = { |
| .name = "Hauppauge WinTV HVR 950", |
| .tuner_type = TUNER_XC2028, |
| .tuner_gpio = default_tuner_gpio, |
| .mts_firmware = 1, |
| .has_dvb = 1, |
| .dvb_gpio = hauppauge_wintv_hvr_900_digital, |
| .ir_codes = RC_MAP_HAUPPAUGE, |
| .decoder = EM28XX_TVP5150, |
| .input = { { |
| .type = EM28XX_VMUX_TELEVISION, |
| .vmux = TVP5150_COMPOSITE0, |
| .amux = EM28XX_AMUX_VIDEO, |
| .gpio = hauppauge_wintv_hvr_900_analog, |
| }, { |
| .type = EM28XX_VMUX_COMPOSITE1, |
| .vmux = TVP5150_COMPOSITE1, |
| .amux = EM28XX_AMUX_LINE_IN, |
| .gpio = hauppauge_wintv_hvr_900_analog, |
| }, { |
| .type = EM28XX_VMUX_SVIDEO, |
| .vmux = TVP5150_SVIDEO, |
| .amux = EM28XX_AMUX_LINE_IN, |
| .gpio = hauppauge_wintv_hvr_900_analog, |
| } }, |
| }, |
| [EM2880_BOARD_PINNACLE_PCTV_HD_PRO] = { |
| .name = "Pinnacle PCTV HD Pro Stick", |
| .tuner_type = TUNER_XC2028, |
| .tuner_gpio = default_tuner_gpio, |
| .mts_firmware = 1, |
| .has_dvb = 1, |
| .dvb_gpio = hauppauge_wintv_hvr_900_digital, |
| .ir_codes = RC_MAP_PINNACLE_PCTV_HD, |
| .decoder = EM28XX_TVP5150, |
| .input = { { |
| .type = EM28XX_VMUX_TELEVISION, |
| .vmux = TVP5150_COMPOSITE0, |
| .amux = EM28XX_AMUX_VIDEO, |
| .gpio = hauppauge_wintv_hvr_900_analog, |
| }, { |
| .type = EM28XX_VMUX_COMPOSITE1, |
| .vmux = TVP5150_COMPOSITE1, |
| .amux = EM28XX_AMUX_LINE_IN, |
| .gpio = hauppauge_wintv_hvr_900_analog, |
| }, { |
| .type = EM28XX_VMUX_SVIDEO, |
| .vmux = TVP5150_SVIDEO, |
| .amux = EM28XX_AMUX_LINE_IN, |
| .gpio = hauppauge_wintv_hvr_900_analog, |
| } }, |
| }, |
| [EM2880_BOARD_AMD_ATI_TV_WONDER_HD_600] = { |
| .name = "AMD ATI TV Wonder HD 600", |
| .tuner_type = TUNER_XC2028, |
| .tuner_gpio = default_tuner_gpio, |
| .mts_firmware = 1, |
| .has_dvb = 1, |
| .dvb_gpio = hauppauge_wintv_hvr_900_digital, |
| .ir_codes = RC_MAP_ATI_TV_WONDER_HD_600, |
| .decoder = EM28XX_TVP5150, |
| .input = { { |
| .type = EM28XX_VMUX_TELEVISION, |
| .vmux = TVP5150_COMPOSITE0, |
| .amux = EM28XX_AMUX_VIDEO, |
| .gpio = hauppauge_wintv_hvr_900_analog, |
| }, { |
| .type = EM28XX_VMUX_COMPOSITE1, |
| .vmux = TVP5150_COMPOSITE1, |
| .amux = EM28XX_AMUX_LINE_IN, |
| .gpio = hauppauge_wintv_hvr_900_analog, |
| }, { |
| .type = EM28XX_VMUX_SVIDEO, |
| .vmux = TVP5150_SVIDEO, |
| .amux = EM28XX_AMUX_LINE_IN, |
| .gpio = hauppauge_wintv_hvr_900_analog, |
| } }, |
| }, |
| [EM2880_BOARD_TERRATEC_HYBRID_XS] = { |
| .name = "Terratec Hybrid XS", |
| .tuner_type = TUNER_XC2028, |
| .tuner_gpio = default_tuner_gpio, |
| .decoder = EM28XX_TVP5150, |
| .has_dvb = 1, |
| .dvb_gpio = default_digital, |
| .ir_codes = RC_MAP_TERRATEC_CINERGY_XS, |
| .xclk = EM28XX_XCLK_FREQUENCY_12MHZ, /* NEC IR */ |
| .input = { { |
| .type = EM28XX_VMUX_TELEVISION, |
| .vmux = TVP5150_COMPOSITE0, |
| .amux = EM28XX_AMUX_VIDEO, |
| .gpio = default_analog, |
| }, { |
| .type = EM28XX_VMUX_COMPOSITE1, |
| .vmux = TVP5150_COMPOSITE1, |
| .amux = EM28XX_AMUX_LINE_IN, |
| .gpio = default_analog, |
| }, { |
| .type = EM28XX_VMUX_SVIDEO, |
| .vmux = TVP5150_SVIDEO, |
| .amux = EM28XX_AMUX_LINE_IN, |
| .gpio = default_analog, |
| } }, |
| }, |
| /* maybe there's a reason behind it why Terratec sells the Hybrid XS |
| as Prodigy XS with a different PID, let's keep it separated for now |
| maybe we'll need it lateron */ |
| [EM2880_BOARD_TERRATEC_PRODIGY_XS] = { |
| .name = "Terratec Prodigy XS", |
| .tuner_type = TUNER_XC2028, |
| .tuner_gpio = default_tuner_gpio, |
| .decoder = EM28XX_TVP5150, |
| .input = { { |
| .type = EM28XX_VMUX_TELEVISION, |
| .vmux = TVP5150_COMPOSITE0, |
| .amux = EM28XX_AMUX_VIDEO, |
| .gpio = hauppauge_wintv_hvr_900_analog, |
| }, { |
| .type = EM28XX_VMUX_COMPOSITE1, |
| .vmux = TVP5150_COMPOSITE1, |
| .amux = EM28XX_AMUX_LINE_IN, |
| .gpio = hauppauge_wintv_hvr_900_analog, |
| }, { |
| .type = EM28XX_VMUX_SVIDEO, |
| .vmux = TVP5150_SVIDEO, |
| .amux = EM28XX_AMUX_LINE_IN, |
| .gpio = hauppauge_wintv_hvr_900_analog, |
| } }, |
| }, |
| [EM2820_BOARD_MSI_VOX_USB_2] = { |
| .name = "MSI VOX USB 2.0", |
| .tuner_type = TUNER_LG_PAL_NEW_TAPC, |
| .tda9887_conf = TDA9887_PRESENT | |
| TDA9887_PORT1_ACTIVE | |
| TDA9887_PORT2_ACTIVE, |
| .max_range_640_480 = 1, |
| .decoder = EM28XX_SAA711X, |
| .input = { { |
| .type = EM28XX_VMUX_TELEVISION, |
| .vmux = SAA7115_COMPOSITE4, |
| .amux = EM28XX_AMUX_VIDEO, |
| }, { |
| .type = EM28XX_VMUX_COMPOSITE1, |
| .vmux = SAA7115_COMPOSITE0, |
| .amux = EM28XX_AMUX_LINE_IN, |
| }, { |
| .type = EM28XX_VMUX_SVIDEO, |
| .vmux = SAA7115_SVIDEO3, |
| .amux = EM28XX_AMUX_LINE_IN, |
| } }, |
| }, |
| [EM2800_BOARD_TERRATEC_CINERGY_200] = { |
| .name = "Terratec Cinergy 200 USB", |
| .is_em2800 = 1, |
| .has_ir_i2c = 1, |
| .tuner_type = TUNER_LG_TALN, |
| .tda9887_conf = TDA9887_PRESENT, |
| .decoder = EM28XX_SAA711X, |
| .input = { { |
| .type = EM28XX_VMUX_TELEVISION, |
| .vmux = SAA7115_COMPOSITE2, |
| .amux = EM28XX_AMUX_VIDEO, |
| }, { |
| .type = EM28XX_VMUX_COMPOSITE1, |
| .vmux = SAA7115_COMPOSITE0, |
| .amux = EM28XX_AMUX_LINE_IN, |
| }, { |
| .type = EM28XX_VMUX_SVIDEO, |
| .vmux = SAA7115_SVIDEO3, |
| .amux = EM28XX_AMUX_LINE_IN, |
| } }, |
| }, |
| [EM2800_BOARD_GRABBEEX_USB2800] = { |
| .name = "eMPIA Technology, Inc. GrabBeeX+ Video Encoder", |
| .is_em2800 = 1, |
| .decoder = EM28XX_SAA711X, |
| .tuner_type = TUNER_ABSENT, /* capture only board */ |
| .input = { { |
| .type = EM28XX_VMUX_COMPOSITE1, |
| .vmux = SAA7115_COMPOSITE0, |
| .amux = EM28XX_AMUX_LINE_IN, |
| }, { |
| .type = EM28XX_VMUX_SVIDEO, |
| .vmux = SAA7115_SVIDEO3, |
| .amux = EM28XX_AMUX_LINE_IN, |
| } }, |
| }, |
| [EM2800_BOARD_VC211A] = { |
| .name = "Actionmaster/LinXcel/Digitus VC211A", |
| .is_em2800 = 1, |
| .tuner_type = TUNER_ABSENT, /* Capture-only board */ |
| .decoder = EM28XX_SAA711X, |
| .input = { { |
| .type = EM28XX_VMUX_COMPOSITE1, |
| .vmux = SAA7115_COMPOSITE0, |
| .amux = EM28XX_AMUX_LINE_IN, |
| .gpio = vc211a_enable, |
| }, { |
| .type = EM28XX_VMUX_SVIDEO, |
| .vmux = SAA7115_SVIDEO3, |
| .amux = EM28XX_AMUX_LINE_IN, |
| .gpio = vc211a_enable, |
| } }, |
| }, |
| [EM2800_BOARD_LEADTEK_WINFAST_USBII] = { |
| .name = "Leadtek Winfast USB II", |
| .is_em2800 = 1, |
| .tuner_type = TUNER_LG_PAL_NEW_TAPC, |
| .tda9887_conf = TDA9887_PRESENT, |
| .decoder = EM28XX_SAA711X, |
| .input = { { |
| .type = EM28XX_VMUX_TELEVISION, |
| .vmux = SAA7115_COMPOSITE2, |
| .amux = EM28XX_AMUX_VIDEO, |
| }, { |
| .type = EM28XX_VMUX_COMPOSITE1, |
| .vmux = SAA7115_COMPOSITE0, |
| .amux = EM28XX_AMUX_LINE_IN, |
| }, { |
| .type = EM28XX_VMUX_SVIDEO, |
| .vmux = SAA7115_SVIDEO3, |
| .amux = EM28XX_AMUX_LINE_IN, |
| } }, |
| }, |
| [EM2800_BOARD_KWORLD_USB2800] = { |
| .name = "Kworld USB2800", |
| .is_em2800 = 1, |
| .tuner_type = TUNER_PHILIPS_FCV1236D, |
| .tda9887_conf = TDA9887_PRESENT, |
| .decoder = EM28XX_SAA711X, |
| .input = { { |
| .type = EM28XX_VMUX_TELEVISION, |
| .vmux = SAA7115_COMPOSITE2, |
| .amux = EM28XX_AMUX_VIDEO, |
| }, { |
| .type = EM28XX_VMUX_COMPOSITE1, |
| .vmux = SAA7115_COMPOSITE0, |
| .amux = EM28XX_AMUX_LINE_IN, |
| }, { |
| .type = EM28XX_VMUX_SVIDEO, |
| .vmux = SAA7115_SVIDEO3, |
| .amux = EM28XX_AMUX_LINE_IN, |
| } }, |
| }, |
| [EM2820_BOARD_PINNACLE_DVC_90] = { |
| .name = "Pinnacle Dazzle DVC 90/100/101/107 / Kaiser Baas Video to DVD maker " |
| "/ Kworld DVD Maker 2 / Plextor ConvertX PX-AV100U", |
| .tuner_type = TUNER_ABSENT, /* capture only board */ |
| .decoder = EM28XX_SAA711X, |
| .input = { { |
| .type = EM28XX_VMUX_COMPOSITE1, |
| .vmux = SAA7115_COMPOSITE0, |
| .amux = EM28XX_AMUX_LINE_IN, |
| }, { |
| .type = EM28XX_VMUX_SVIDEO, |
| .vmux = SAA7115_SVIDEO3, |
| .amux = EM28XX_AMUX_LINE_IN, |
| } }, |
| }, |
| [EM2800_BOARD_VGEAR_POCKETTV] = { |
| .name = "V-Gear PocketTV", |
| .is_em2800 = 1, |
| .tuner_type = TUNER_LG_PAL_NEW_TAPC, |
| .tda9887_conf = TDA9887_PRESENT, |
| .decoder = EM28XX_SAA711X, |
| .input = { { |
| .type = EM28XX_VMUX_TELEVISION, |
| .vmux = SAA7115_COMPOSITE2, |
| .amux = EM28XX_AMUX_VIDEO, |
| }, { |
| .type = EM28XX_VMUX_COMPOSITE1, |
| .vmux = SAA7115_COMPOSITE0, |
| .amux = EM28XX_AMUX_LINE_IN, |
| }, { |
| .type = EM28XX_VMUX_SVIDEO, |
| .vmux = SAA7115_SVIDEO3, |
| .amux = EM28XX_AMUX_LINE_IN, |
| } }, |
| }, |
| [EM2820_BOARD_PROLINK_PLAYTV_BOX4_USB2] = { |
| .name = "Pixelview PlayTV Box 4 USB 2.0", |
| .tda9887_conf = TDA9887_PRESENT, |
| .tuner_type = TUNER_YMEC_TVF_5533MF, |
| .decoder = EM28XX_SAA711X, |
| .input = { { |
| .type = EM28XX_VMUX_TELEVISION, |
| .vmux = SAA7115_COMPOSITE2, |
| .amux = EM28XX_AMUX_VIDEO, |
| .aout = EM28XX_AOUT_MONO | /* I2S */ |
| EM28XX_AOUT_MASTER, /* Line out pin */ |
| }, { |
| .type = EM28XX_VMUX_COMPOSITE1, |
| .vmux = SAA7115_COMPOSITE0, |
| .amux = EM28XX_AMUX_LINE_IN, |
| }, { |
| .type = EM28XX_VMUX_SVIDEO, |
| .vmux = SAA7115_SVIDEO3, |
| .amux = EM28XX_AMUX_LINE_IN, |
| } }, |
| }, |
| [EM2820_BOARD_PROLINK_PLAYTV_USB2] = { |
| .name = "SIIG AVTuner-PVR / Pixelview Prolink PlayTV USB 2.0", |
| .has_snapshot_button = 1, |
| .tda9887_conf = TDA9887_PRESENT, |
| .tuner_type = TUNER_YMEC_TVF_5533MF, |
| .decoder = EM28XX_SAA711X, |
| .input = { { |
| .type = EM28XX_VMUX_TELEVISION, |
| .vmux = SAA7115_COMPOSITE2, |
| .amux = EM28XX_AMUX_VIDEO, |
| .aout = EM28XX_AOUT_MONO | /* I2S */ |
| EM28XX_AOUT_MASTER, /* Line out pin */ |
| }, { |
| .type = EM28XX_VMUX_COMPOSITE1, |
| .vmux = SAA7115_COMPOSITE0, |
| .amux = EM28XX_AMUX_LINE_IN, |
| }, { |
| .type = EM28XX_VMUX_SVIDEO, |
| .vmux = SAA7115_SVIDEO3, |
| .amux = EM28XX_AMUX_LINE_IN, |
| } }, |
| }, |
| [EM2860_BOARD_SAA711X_REFERENCE_DESIGN] = { |
| .name = "EM2860/SAA711X Reference Design", |
| .has_snapshot_button = 1, |
| .tuner_type = TUNER_ABSENT, |
| .decoder = EM28XX_SAA711X, |
| .input = { { |
| .type = EM28XX_VMUX_SVIDEO, |
| .vmux = SAA7115_SVIDEO3, |
| }, { |
| .type = EM28XX_VMUX_COMPOSITE1, |
| .vmux = SAA7115_COMPOSITE0, |
| } }, |
| }, |
| |
| [EM2874_BOARD_LEADERSHIP_ISDBT] = { |
| .def_i2c_bus = 1, |
| .i2c_speed = EM28XX_I2C_CLK_WAIT_ENABLE | |
| EM28XX_I2C_FREQ_100_KHZ, |
| .xclk = EM28XX_XCLK_FREQUENCY_10MHZ, |
| .name = "EM2874 Leadership ISDBT", |
| .tuner_type = TUNER_ABSENT, |
| .tuner_gpio = leadership_reset, |
| .dvb_gpio = leadership_digital, |
| .has_dvb = 1, |
| }, |
| |
| [EM2880_BOARD_MSI_DIGIVOX_AD] = { |
| .name = "MSI DigiVox A/D", |
| .valid = EM28XX_BOARD_NOT_VALIDATED, |
| .tuner_type = TUNER_XC2028, |
| .tuner_gpio = default_tuner_gpio, |
| .decoder = EM28XX_TVP5150, |
| .input = { { |
| .type = EM28XX_VMUX_TELEVISION, |
| .vmux = TVP5150_COMPOSITE0, |
| .amux = EM28XX_AMUX_VIDEO, |
| .gpio = em2880_msi_digivox_ad_analog, |
| }, { |
| .type = EM28XX_VMUX_COMPOSITE1, |
| .vmux = TVP5150_COMPOSITE1, |
| .amux = EM28XX_AMUX_LINE_IN, |
| .gpio = em2880_msi_digivox_ad_analog, |
| }, { |
| .type = EM28XX_VMUX_SVIDEO, |
| .vmux = TVP5150_SVIDEO, |
| .amux = EM28XX_AMUX_LINE_IN, |
| .gpio = em2880_msi_digivox_ad_analog, |
| } }, |
| }, |
| [EM2880_BOARD_MSI_DIGIVOX_AD_II] = { |
| .name = "MSI DigiVox A/D II", |
| .valid = EM28XX_BOARD_NOT_VALIDATED, |
| .tuner_type = TUNER_XC2028, |
| .tuner_gpio = default_tuner_gpio, |
| .decoder = EM28XX_TVP5150, |
| .input = { { |
| .type = EM28XX_VMUX_TELEVISION, |
| .vmux = TVP5150_COMPOSITE0, |
| .amux = EM28XX_AMUX_VIDEO, |
| .gpio = em2880_msi_digivox_ad_analog, |
| }, { |
| .type = EM28XX_VMUX_COMPOSITE1, |
| .vmux = TVP5150_COMPOSITE1, |
| .amux = EM28XX_AMUX_LINE_IN, |
| .gpio = em2880_msi_digivox_ad_analog, |
| }, { |
| .type = EM28XX_VMUX_SVIDEO, |
| .vmux = TVP5150_SVIDEO, |
| .amux = EM28XX_AMUX_LINE_IN, |
| .gpio = em2880_msi_digivox_ad_analog, |
| } }, |
| }, |
| [EM2880_BOARD_KWORLD_DVB_305U] = { |
| .name = "KWorld DVB-T 305U", |
| .tuner_type = TUNER_XC2028, |
| .tuner_gpio = default_tuner_gpio, |
| .decoder = EM28XX_TVP5150, |
| .input = { { |
| .type = EM28XX_VMUX_TELEVISION, |
| .vmux = TVP5150_COMPOSITE0, |
| .amux = EM28XX_AMUX_VIDEO, |
| }, { |
| .type = EM28XX_VMUX_COMPOSITE1, |
| .vmux = TVP5150_COMPOSITE1, |
| .amux = EM28XX_AMUX_LINE_IN, |
| }, { |
| .type = EM28XX_VMUX_SVIDEO, |
| .vmux = TVP5150_SVIDEO, |
| .amux = EM28XX_AMUX_LINE_IN, |
| } }, |
| }, |
| [EM2880_BOARD_KWORLD_DVB_310U] = { |
| .name = "KWorld DVB-T 310U", |
| .tuner_type = TUNER_XC2028, |
| .tuner_gpio = default_tuner_gpio, |
| .has_dvb = 1, |
| .dvb_gpio = default_digital, |
| .mts_firmware = 1, |
| .decoder = EM28XX_TVP5150, |
| .input = { { |
| .type = EM28XX_VMUX_TELEVISION, |
| .vmux = TVP5150_COMPOSITE0, |
| .amux = EM28XX_AMUX_VIDEO, |
| .gpio = default_analog, |
| }, { |
| .type = EM28XX_VMUX_COMPOSITE1, |
| .vmux = TVP5150_COMPOSITE1, |
| .amux = EM28XX_AMUX_LINE_IN, |
| .gpio = default_analog, |
| }, { /* S-video has not been tested yet */ |
| .type = EM28XX_VMUX_SVIDEO, |
| .vmux = TVP5150_SVIDEO, |
| .amux = EM28XX_AMUX_LINE_IN, |
| .gpio = default_analog, |
| } }, |
| }, |
| [EM2882_BOARD_KWORLD_ATSC_315U] = { |
| .name = "KWorld ATSC 315U HDTV TV Box", |
| .valid = EM28XX_BOARD_NOT_VALIDATED, |
| .tuner_type = TUNER_THOMSON_DTT761X, |
| .tuner_gpio = em2882_kworld_315u_tuner_gpio, |
| .tda9887_conf = TDA9887_PRESENT, |
| .decoder = EM28XX_SAA711X, |
| .has_dvb = 1, |
| .dvb_gpio = em2882_kworld_315u_digital, |
| .ir_codes = RC_MAP_KWORLD_315U, |
| .xclk = EM28XX_XCLK_FREQUENCY_12MHZ, |
| .i2c_speed = EM28XX_I2C_CLK_WAIT_ENABLE, |
| /* Analog mode - still not ready */ |
| /*.input = { { |
| .type = EM28XX_VMUX_TELEVISION, |
| .vmux = SAA7115_COMPOSITE2, |
| .amux = EM28XX_AMUX_VIDEO, |
| .gpio = em2882_kworld_315u_analog, |
| .aout = EM28XX_AOUT_PCM_IN | EM28XX_AOUT_PCM_STEREO, |
| }, { |
| .type = EM28XX_VMUX_COMPOSITE1, |
| .vmux = SAA7115_COMPOSITE0, |
| .amux = EM28XX_AMUX_LINE_IN, |
| .gpio = em2882_kworld_315u_analog1, |
| .aout = EM28XX_AOUT_PCM_IN | EM28XX_AOUT_PCM_STEREO, |
| }, { |
| .type = EM28XX_VMUX_SVIDEO, |
| .vmux = SAA7115_SVIDEO3, |
| .amux = EM28XX_AMUX_LINE_IN, |
| .gpio = em2882_kworld_315u_analog1, |
| .aout = EM28XX_AOUT_PCM_IN | EM28XX_AOUT_PCM_STEREO, |
| } }, */ |
| }, |
| [EM2880_BOARD_EMPIRE_DUAL_TV] = { |
| .name = "Empire dual TV", |
| .tuner_type = TUNER_XC2028, |
| .tuner_gpio = default_tuner_gpio, |
| .has_dvb = 1, |
| .dvb_gpio = default_digital, |
| .mts_firmware = 1, |
| .decoder = EM28XX_TVP5150, |
| .input = { { |
| .type = EM28XX_VMUX_TELEVISION, |
| .vmux = TVP5150_COMPOSITE0, |
| .amux = EM28XX_AMUX_VIDEO, |
| .gpio = default_analog, |
| }, { |
| .type = EM28XX_VMUX_COMPOSITE1, |
| .vmux = TVP5150_COMPOSITE1, |
| .amux = EM28XX_AMUX_LINE_IN, |
| .gpio = default_analog, |
| }, { |
| .type = EM28XX_VMUX_SVIDEO, |
| .vmux = TVP5150_SVIDEO, |
| .amux = EM28XX_AMUX_LINE_IN, |
| .gpio = default_analog, |
| } }, |
| }, |
| [EM2881_BOARD_DNT_DA2_HYBRID] = { |
| .name = "DNT DA2 Hybrid", |
| .valid = EM28XX_BOARD_NOT_VALIDATED, |
| .tuner_type = TUNER_XC2028, |
| .tuner_gpio = default_tuner_gpio, |
| .decoder = EM28XX_TVP5150, |
| .input = { { |
| .type = EM28XX_VMUX_TELEVISION, |
| .vmux = TVP5150_COMPOSITE0, |
| .amux = EM28XX_AMUX_VIDEO, |
| .gpio = default_analog, |
| }, { |
| .type = EM28XX_VMUX_COMPOSITE1, |
| .vmux = TVP5150_COMPOSITE1, |
| .amux = EM28XX_AMUX_LINE_IN, |
| .gpio = default_analog, |
| }, { |
| .type = EM28XX_VMUX_SVIDEO, |
| .vmux = TVP5150_SVIDEO, |
| .amux = EM28XX_AMUX_LINE_IN, |
| .gpio = default_analog, |
| } }, |
| }, |
| [EM2881_BOARD_PINNACLE_HYBRID_PRO] = { |
| .name = "Pinnacle Hybrid Pro", |
| .tuner_type = TUNER_XC2028, |
| .tuner_gpio = default_tuner_gpio, |
| .decoder = EM28XX_TVP5150, |
| .has_dvb = 1, |
| .dvb_gpio = pinnacle_hybrid_pro_digital, |
| .input = { { |
| .type = EM28XX_VMUX_TELEVISION, |
| .vmux = TVP5150_COMPOSITE0, |
| .amux = EM28XX_AMUX_VIDEO, |
| .gpio = pinnacle_hybrid_pro_analog, |
| }, { |
| .type = EM28XX_VMUX_COMPOSITE1, |
| .vmux = TVP5150_COMPOSITE1, |
| .amux = EM28XX_AMUX_LINE_IN, |
| .gpio = pinnacle_hybrid_pro_analog, |
| }, { |
| .type = EM28XX_VMUX_SVIDEO, |
| .vmux = TVP5150_SVIDEO, |
| .amux = EM28XX_AMUX_LINE_IN, |
| .gpio = pinnacle_hybrid_pro_analog, |
| } }, |
| }, |
| [EM2882_BOARD_PINNACLE_HYBRID_PRO_330E] = { |
| .name = "Pinnacle Hybrid Pro (330e)", |
| .tuner_type = TUNER_XC2028, |
| .tuner_gpio = default_tuner_gpio, |
| .mts_firmware = 1, |
| .has_dvb = 1, |
| .dvb_gpio = hauppauge_wintv_hvr_900R2_digital, |
| .ir_codes = RC_MAP_PINNACLE_PCTV_HD, |
| .decoder = EM28XX_TVP5150, |
| .input = { { |
| .type = EM28XX_VMUX_TELEVISION, |
| .vmux = TVP5150_COMPOSITE0, |
| .amux = EM28XX_AMUX_VIDEO, |
| .gpio = hauppauge_wintv_hvr_900_analog, |
| }, { |
| .type = EM28XX_VMUX_COMPOSITE1, |
| .vmux = TVP5150_COMPOSITE1, |
| .amux = EM28XX_AMUX_LINE_IN, |
| .gpio = hauppauge_wintv_hvr_900_analog, |
| }, { |
| .type = EM28XX_VMUX_SVIDEO, |
| .vmux = TVP5150_SVIDEO, |
| .amux = EM28XX_AMUX_LINE_IN, |
| .gpio = hauppauge_wintv_hvr_900_analog, |
| } }, |
| }, |
| [EM2882_BOARD_KWORLD_VS_DVBT] = { |
| .name = "Kworld VS-DVB-T 323UR", |
| .tuner_type = TUNER_XC2028, |
| .tuner_gpio = default_tuner_gpio, |
| .decoder = EM28XX_TVP5150, |
| .mts_firmware = 1, |
| .has_dvb = 1, |
| .dvb_gpio = kworld_330u_digital, |
| .xclk = EM28XX_XCLK_FREQUENCY_12MHZ, /* NEC IR */ |
| .ir_codes = RC_MAP_KWORLD_315U, |
| .input = { { |
| .type = EM28XX_VMUX_TELEVISION, |
| .vmux = TVP5150_COMPOSITE0, |
| .amux = EM28XX_AMUX_VIDEO, |
| }, { |
| .type = EM28XX_VMUX_COMPOSITE1, |
| .vmux = TVP5150_COMPOSITE1, |
| .amux = EM28XX_AMUX_LINE_IN, |
| }, { |
| .type = EM28XX_VMUX_SVIDEO, |
| .vmux = TVP5150_SVIDEO, |
| .amux = EM28XX_AMUX_LINE_IN, |
| } }, |
| }, |
| [EM2882_BOARD_TERRATEC_HYBRID_XS] = { |
| .name = "Terratec Cinnergy Hybrid T USB XS (em2882)", |
| .tuner_type = TUNER_XC2028, |
| .tuner_gpio = default_tuner_gpio, |
| .mts_firmware = 1, |
| .decoder = EM28XX_TVP5150, |
| .has_dvb = 1, |
| .dvb_gpio = hauppauge_wintv_hvr_900_digital, |
| .ir_codes = RC_MAP_TERRATEC_CINERGY_XS, |
| .xclk = EM28XX_XCLK_FREQUENCY_12MHZ, |
| .input = { { |
| .type = EM28XX_VMUX_TELEVISION, |
| .vmux = TVP5150_COMPOSITE0, |
| .amux = EM28XX_AMUX_VIDEO, |
| .gpio = hauppauge_wintv_hvr_900_analog, |
| }, { |
| .type = EM28XX_VMUX_COMPOSITE1, |
| .vmux = TVP5150_COMPOSITE1, |
| .amux = EM28XX_AMUX_LINE_IN, |
| .gpio = hauppauge_wintv_hvr_900_analog, |
| }, { |
| .type = EM28XX_VMUX_SVIDEO, |
| .vmux = TVP5150_SVIDEO, |
| .amux = EM28XX_AMUX_LINE_IN, |
| .gpio = hauppauge_wintv_hvr_900_analog, |
| } }, |
| }, |
| [EM2882_BOARD_DIKOM_DK300] = { |
| .name = "Dikom DK300", |
| .tuner_type = TUNER_XC2028, |
| .tuner_gpio = default_tuner_gpio, |
| .decoder = EM28XX_TVP5150, |
| .mts_firmware = 1, |
| .has_dvb = 1, |
| .dvb_gpio = dikom_dk300_digital, |
| .input = { { |
| .type = EM28XX_VMUX_TELEVISION, |
| .vmux = TVP5150_COMPOSITE0, |
| .amux = EM28XX_AMUX_VIDEO, |
| .gpio = default_analog, |
| } }, |
| }, |
| [EM2883_BOARD_KWORLD_HYBRID_330U] = { |
| .name = "Kworld PlusTV HD Hybrid 330", |
| .tuner_type = TUNER_XC2028, |
| .tuner_gpio = default_tuner_gpio, |
| .decoder = EM28XX_TVP5150, |
| .mts_firmware = 1, |
| .has_dvb = 1, |
| .dvb_gpio = kworld_330u_digital, |
| .xclk = EM28XX_XCLK_FREQUENCY_12MHZ, |
| .i2c_speed = EM28XX_I2C_CLK_WAIT_ENABLE | |
| EM28XX_I2C_EEPROM_ON_BOARD | |
| EM28XX_I2C_EEPROM_KEY_VALID, |
| .input = { { |
| .type = EM28XX_VMUX_TELEVISION, |
| .vmux = TVP5150_COMPOSITE0, |
| .amux = EM28XX_AMUX_VIDEO, |
| .gpio = kworld_330u_analog, |
| .aout = EM28XX_AOUT_PCM_IN | EM28XX_AOUT_PCM_STEREO, |
| }, { |
| .type = EM28XX_VMUX_COMPOSITE1, |
| .vmux = TVP5150_COMPOSITE1, |
| .amux = EM28XX_AMUX_LINE_IN, |
| .gpio = kworld_330u_analog, |
| .aout = EM28XX_AOUT_PCM_IN | EM28XX_AOUT_PCM_STEREO, |
| }, { |
| .type = EM28XX_VMUX_SVIDEO, |
| .vmux = TVP5150_SVIDEO, |
| .amux = EM28XX_AMUX_LINE_IN, |
| .gpio = kworld_330u_analog, |
| } }, |
| }, |
| [EM2820_BOARD_COMPRO_VIDEOMATE_FORYOU] = { |
| .name = "Compro VideoMate ForYou/Stereo", |
| .tuner_type = TUNER_LG_PAL_NEW_TAPC, |
| .tvaudio_addr = 0xb0, |
| .tda9887_conf = TDA9887_PRESENT, |
| .decoder = EM28XX_TVP5150, |
| .adecoder = EM28XX_TVAUDIO, |
| .mute_gpio = compro_mute_gpio, |
| .input = { { |
| .type = EM28XX_VMUX_TELEVISION, |
| .vmux = TVP5150_COMPOSITE0, |
| .amux = EM28XX_AMUX_VIDEO, |
| .gpio = compro_unmute_tv_gpio, |
| }, { |
| .type = EM28XX_VMUX_SVIDEO, |
| .vmux = TVP5150_SVIDEO, |
| .amux = EM28XX_AMUX_LINE_IN, |
| .gpio = compro_unmute_svid_gpio, |
| } }, |
| }, |
| [EM2860_BOARD_KAIOMY_TVNPC_U2] = { |
| .name = "Kaiomy TVnPC U2", |
| .vchannels = 3, |
| .tuner_type = TUNER_XC2028, |
| .tuner_addr = 0x61, |
| .mts_firmware = 1, |
| .decoder = EM28XX_TVP5150, |
| .tuner_gpio = default_tuner_gpio, |
| .ir_codes = RC_MAP_KAIOMY, |
| .input = { { |
| .type = EM28XX_VMUX_TELEVISION, |
| .vmux = TVP5150_COMPOSITE0, |
| .amux = EM28XX_AMUX_VIDEO, |
| |
| }, { |
| .type = EM28XX_VMUX_COMPOSITE1, |
| .vmux = TVP5150_COMPOSITE1, |
| .amux = EM28XX_AMUX_LINE_IN, |
| }, { |
| .type = EM28XX_VMUX_SVIDEO, |
| .vmux = TVP5150_SVIDEO, |
| .amux = EM28XX_AMUX_LINE_IN, |
| } }, |
| .radio = { |
| .type = EM28XX_RADIO, |
| .amux = EM28XX_AMUX_LINE_IN, |
| } |
| }, |
| [EM2860_BOARD_EASYCAP] = { |
| .name = "Easy Cap Capture DC-60", |
| .vchannels = 2, |
| .tuner_type = TUNER_ABSENT, |
| .decoder = EM28XX_SAA711X, |
| .input = { { |
| .type = EM28XX_VMUX_COMPOSITE1, |
| .vmux = SAA7115_COMPOSITE0, |
| .amux = EM28XX_AMUX_LINE_IN, |
| }, { |
| .type = EM28XX_VMUX_SVIDEO, |
| .vmux = SAA7115_SVIDEO3, |
| .amux = EM28XX_AMUX_LINE_IN, |
| } }, |
| }, |
| [EM2820_BOARD_IODATA_GVMVP_SZ] = { |
| .name = "IO-DATA GV-MVP/SZ", |
| .tuner_type = TUNER_PHILIPS_FM1236_MK3, |
| .tuner_gpio = default_tuner_gpio, |
| .tda9887_conf = TDA9887_PRESENT, |
| .decoder = EM28XX_TVP5150, |
| .input = { { |
| .type = EM28XX_VMUX_TELEVISION, |
| .vmux = TVP5150_COMPOSITE0, |
| .amux = EM28XX_AMUX_VIDEO, |
| }, { /* Composite has not been tested yet */ |
| .type = EM28XX_VMUX_COMPOSITE1, |
| .vmux = TVP5150_COMPOSITE1, |
| .amux = EM28XX_AMUX_VIDEO, |
| }, { /* S-video has not been tested yet */ |
| .type = EM28XX_VMUX_SVIDEO, |
| .vmux = TVP5150_SVIDEO, |
| .amux = EM28XX_AMUX_VIDEO, |
| } }, |
| }, |
| [EM2860_BOARD_TERRATEC_GRABBY] = { |
| .name = "Terratec Grabby", |
| .vchannels = 2, |
| .tuner_type = TUNER_ABSENT, |
| .decoder = EM28XX_SAA711X, |
| .xclk = EM28XX_XCLK_FREQUENCY_12MHZ, |
| .input = { { |
| .type = EM28XX_VMUX_COMPOSITE1, |
| .vmux = SAA7115_COMPOSITE0, |
| .amux = EM28XX_AMUX_LINE_IN, |
| }, { |
| .type = EM28XX_VMUX_SVIDEO, |
| .vmux = SAA7115_SVIDEO3, |
| .amux = EM28XX_AMUX_LINE_IN, |
| } }, |
| }, |
| [EM2860_BOARD_TERRATEC_AV350] = { |
| .name = "Terratec AV350", |
| .vchannels = 2, |
| .tuner_type = TUNER_ABSENT, |
| .decoder = EM28XX_TVP5150, |
| .xclk = EM28XX_XCLK_FREQUENCY_12MHZ, |
| .mute_gpio = terratec_av350_mute_gpio, |
| .input = { { |
| .type = EM28XX_VMUX_COMPOSITE1, |
| .vmux = TVP5150_COMPOSITE1, |
| .amux = EM28XX_AUDIO_SRC_LINE, |
| .gpio = terratec_av350_unmute_gpio, |
| |
| }, { |
| .type = EM28XX_VMUX_SVIDEO, |
| .vmux = TVP5150_SVIDEO, |
| .amux = EM28XX_AUDIO_SRC_LINE, |
| .gpio = terratec_av350_unmute_gpio, |
| } }, |
| }, |
| |
| [EM2860_BOARD_ELGATO_VIDEO_CAPTURE] = { |
| .name = "Elgato Video Capture", |
| .decoder = EM28XX_SAA711X, |
| .tuner_type = TUNER_ABSENT, /* Capture only device */ |
| .input = { { |
| .type = EM28XX_VMUX_COMPOSITE1, |
| .vmux = SAA7115_COMPOSITE0, |
| .amux = EM28XX_AMUX_LINE_IN, |
| }, { |
| .type = EM28XX_VMUX_SVIDEO, |
| .vmux = SAA7115_SVIDEO3, |
| .amux = EM28XX_AMUX_LINE_IN, |
| } }, |
| }, |
| |
| [EM2882_BOARD_EVGA_INDTUBE] = { |
| .name = "Evga inDtube", |
| .tuner_type = TUNER_XC2028, |
| .tuner_gpio = default_tuner_gpio, |
| .decoder = EM28XX_TVP5150, |
| .xclk = EM28XX_XCLK_FREQUENCY_12MHZ, /* NEC IR */ |
| .mts_firmware = 1, |
| .has_dvb = 1, |
| .dvb_gpio = evga_indtube_digital, |
| .ir_codes = RC_MAP_EVGA_INDTUBE, |
| .input = { { |
| .type = EM28XX_VMUX_TELEVISION, |
| .vmux = TVP5150_COMPOSITE0, |
| .amux = EM28XX_AMUX_VIDEO, |
| .gpio = evga_indtube_analog, |
| }, { |
| .type = EM28XX_VMUX_COMPOSITE1, |
| .vmux = TVP5150_COMPOSITE1, |
| .amux = EM28XX_AMUX_LINE_IN, |
| .gpio = evga_indtube_analog, |
| }, { |
| .type = EM28XX_VMUX_SVIDEO, |
| .vmux = TVP5150_SVIDEO, |
| .amux = EM28XX_AMUX_LINE_IN, |
| .gpio = evga_indtube_analog, |
| } }, |
| }, |
| /* eb1a:2868 Empia EM2870 + Philips CU1216L NIM (Philips TDA10023 + |
| Infineon TUA6034) */ |
| [EM2870_BOARD_REDDO_DVB_C_USB_BOX] = { |
| .name = "Reddo DVB-C USB TV Box", |
| .tuner_type = TUNER_ABSENT, |
| .tuner_gpio = reddo_dvb_c_usb_box, |
| .has_dvb = 1, |
| }, |
| /* 1b80:a340 - Empia EM2870, NXP TDA18271HD and LG DT3304, sold |
| * initially as the KWorld PlusTV 340U, then as the UB435-Q. |
| * Early variants have a TDA18271HD/C1, later ones a TDA18271HD/C2 */ |
| [EM2870_BOARD_KWORLD_A340] = { |
| .name = "KWorld PlusTV 340U or UB435-Q (ATSC)", |
| .tuner_type = TUNER_ABSENT, /* Digital-only TDA18271HD */ |
| .has_dvb = 1, |
| .dvb_gpio = kworld_a340_digital, |
| .tuner_gpio = default_tuner_gpio, |
| }, |
| /* 2013:024f PCTV nanoStick T2 290e. |
| * Empia EM28174, Sony CXD2820R and NXP TDA18271HD/C2 */ |
| [EM28174_BOARD_PCTV_290E] = { |
| .name = "PCTV nanoStick T2 290e", |
| .def_i2c_bus = 1, |
| .i2c_speed = EM28XX_I2C_CLK_WAIT_ENABLE | EM28XX_I2C_FREQ_100_KHZ, |
| .tuner_type = TUNER_ABSENT, |
| .tuner_gpio = pctv_290e, |
| .has_dvb = 1, |
| .ir_codes = RC_MAP_PINNACLE_PCTV_HD, |
| }, |
| /* 2013:024f PCTV DVB-S2 Stick 460e |
| * Empia EM28174, NXP TDA10071, Conexant CX24118A and Allegro A8293 */ |
| [EM28174_BOARD_PCTV_460E] = { |
| .def_i2c_bus = 1, |
| .i2c_speed = EM28XX_I2C_CLK_WAIT_ENABLE | EM28XX_I2C_FREQ_400_KHZ, |
| .name = "PCTV DVB-S2 Stick (460e)", |
| .tuner_type = TUNER_ABSENT, |
| .tuner_gpio = pctv_460e, |
| .has_dvb = 1, |
| .ir_codes = RC_MAP_PINNACLE_PCTV_HD, |
| }, |
| /* eb1a:5006 Honestech VIDBOX NW03 |
| * Empia EM2860, Philips SAA7113, Empia EMP202, No Tuner */ |
| [EM2860_BOARD_HT_VIDBOX_NW03] = { |
| .name = "Honestech Vidbox NW03", |
| .tuner_type = TUNER_ABSENT, |
| .decoder = EM28XX_SAA711X, |
| .input = { { |
| .type = EM28XX_VMUX_COMPOSITE1, |
| .vmux = SAA7115_COMPOSITE0, |
| .amux = EM28XX_AMUX_LINE_IN, |
| }, { |
| .type = EM28XX_VMUX_SVIDEO, |
| .vmux = SAA7115_SVIDEO3, /* S-VIDEO needs confirming */ |
| .amux = EM28XX_AMUX_LINE_IN, |
| } }, |
| }, |
| /* 1b80:e425 MaxMedia UB425-TC |
| * Empia EM2874B + Micronas DRX 3913KA2 + NXP TDA18271HDC2 */ |
| [EM2874_BOARD_MAXMEDIA_UB425_TC] = { |
| .name = "MaxMedia UB425-TC", |
| .tuner_type = TUNER_ABSENT, |
| .tuner_gpio = maxmedia_ub425_tc, |
| .has_dvb = 1, |
| .ir_codes = RC_MAP_REDDO, |
| .def_i2c_bus = 1, |
| .i2c_speed = EM28XX_I2C_CLK_WAIT_ENABLE | |
| EM28XX_I2C_FREQ_400_KHZ, |
| }, |
| /* 2304:0242 PCTV QuatroStick (510e) |
| * Empia EM2884 + Micronas DRX 3926K + NXP TDA18271HDC2 */ |
| [EM2884_BOARD_PCTV_510E] = { |
| .name = "PCTV QuatroStick (510e)", |
| .tuner_type = TUNER_ABSENT, |
| .tuner_gpio = pctv_510e, |
| .has_dvb = 1, |
| .ir_codes = RC_MAP_PINNACLE_PCTV_HD, |
| .def_i2c_bus = 1, |
| .i2c_speed = EM28XX_I2C_CLK_WAIT_ENABLE | |
| EM28XX_I2C_FREQ_400_KHZ, |
| }, |
| /* 2013:0251 PCTV QuatroStick nano (520e) |
| * Empia EM2884 + Micronas DRX 3926K + NXP TDA18271HDC2 */ |
| [EM2884_BOARD_PCTV_520E] = { |
| .name = "PCTV QuatroStick nano (520e)", |
| .tuner_type = TUNER_ABSENT, |
| .tuner_gpio = pctv_520e, |
| .has_dvb = 1, |
| .ir_codes = RC_MAP_PINNACLE_PCTV_HD, |
| .def_i2c_bus = 1, |
| .i2c_speed = EM28XX_I2C_CLK_WAIT_ENABLE | |
| EM28XX_I2C_FREQ_400_KHZ, |
| }, |
| [EM2884_BOARD_TERRATEC_HTC_USB_XS] = { |
| .name = "Terratec Cinergy HTC USB XS", |
| .has_dvb = 1, |
| .ir_codes = RC_MAP_NEC_TERRATEC_CINERGY_XS, |
| .tuner_type = TUNER_ABSENT, |
| .def_i2c_bus = 1, |
| .i2c_speed = EM28XX_I2C_CLK_WAIT_ENABLE | |
| EM28XX_I2C_FREQ_400_KHZ, |
| }, |
| /* 1b80:e1cc Delock 61959 |
| * Empia EM2874B + Micronas DRX 3913KA2 + NXP TDA18271HDC2 |
| * mostly the same as MaxMedia UB-425-TC but different remote */ |
| [EM2874_BOARD_DELOCK_61959] = { |
| .name = "Delock 61959", |
| .tuner_type = TUNER_ABSENT, |
| .tuner_gpio = maxmedia_ub425_tc, |
| .has_dvb = 1, |
| .ir_codes = RC_MAP_DELOCK_61959, |
| .def_i2c_bus = 1, |
| .i2c_speed = EM28XX_I2C_CLK_WAIT_ENABLE | |
| EM28XX_I2C_FREQ_400_KHZ, |
| }, |
| }; |
| const unsigned int em28xx_bcount = ARRAY_SIZE(em28xx_boards); |
| |
| /* table of devices that work with this driver */ |
| struct usb_device_id em28xx_id_table[] = { |
| { USB_DEVICE(0xeb1a, 0x2750), |
| .driver_info = EM2750_BOARD_UNKNOWN }, |
| { USB_DEVICE(0xeb1a, 0x2751), |
| .driver_info = EM2750_BOARD_UNKNOWN }, |
| { USB_DEVICE(0xeb1a, 0x2800), |
| .driver_info = EM2800_BOARD_UNKNOWN }, |
| { USB_DEVICE(0xeb1a, 0x2710), |
| .driver_info = EM2820_BOARD_UNKNOWN }, |
| { USB_DEVICE(0xeb1a, 0x2820), |
| .driver_info = EM2820_BOARD_UNKNOWN }, |
| { USB_DEVICE(0xeb1a, 0x2821), |
| .driver_info = EM2820_BOARD_UNKNOWN }, |
| { USB_DEVICE(0xeb1a, 0x2860), |
| .driver_info = EM2820_BOARD_UNKNOWN }, |
| { USB_DEVICE(0xeb1a, 0x2861), |
| .driver_info = EM2820_BOARD_UNKNOWN }, |
| { USB_DEVICE(0xeb1a, 0x2862), |
| .driver_info = EM2820_BOARD_UNKNOWN }, |
| { USB_DEVICE(0xeb1a, 0x2863), |
| .driver_info = EM2820_BOARD_UNKNOWN }, |
| { USB_DEVICE(0xeb1a, 0x2870), |
| .driver_info = EM2820_BOARD_UNKNOWN }, |
| { USB_DEVICE(0xeb1a, 0x2881), |
| .driver_info = EM2820_BOARD_UNKNOWN }, |
| { USB_DEVICE(0xeb1a, 0x2883), |
| .driver_info = EM2820_BOARD_UNKNOWN }, |
| { USB_DEVICE(0xeb1a, 0x2868), |
| .driver_info = EM2820_BOARD_UNKNOWN }, |
| { USB_DEVICE(0xeb1a, 0x2875), |
| .driver_info = EM2820_BOARD_UNKNOWN }, |
| { USB_DEVICE(0xeb1a, 0xe300), |
| .driver_info = EM2861_BOARD_KWORLD_PVRTV_300U }, |
| { USB_DEVICE(0xeb1a, 0xe303), |
| .driver_info = EM2860_BOARD_KAIOMY_TVNPC_U2 }, |
| { USB_DEVICE(0xeb1a, 0xe305), |
| .driver_info = EM2880_BOARD_KWORLD_DVB_305U }, |
| { USB_DEVICE(0xeb1a, 0xe310), |
| .driver_info = EM2880_BOARD_MSI_DIGIVOX_AD }, |
| { USB_DEVICE(0xeb1a, 0xa313), |
| .driver_info = EM2882_BOARD_KWORLD_ATSC_315U }, |
| { USB_DEVICE(0xeb1a, 0xa316), |
| .driver_info = EM2883_BOARD_KWORLD_HYBRID_330U }, |
| { USB_DEVICE(0xeb1a, 0xe320), |
| .driver_info = EM2880_BOARD_MSI_DIGIVOX_AD_II }, |
| { USB_DEVICE(0xeb1a, 0xe323), |
| .driver_info = EM2882_BOARD_KWORLD_VS_DVBT }, |
| { USB_DEVICE(0xeb1a, 0xe350), |
| .driver_info = EM2870_BOARD_KWORLD_350U }, |
| { USB_DEVICE(0xeb1a, 0xe355), |
| .driver_info = EM2870_BOARD_KWORLD_355U }, |
| { USB_DEVICE(0xeb1a, 0x2801), |
| .driver_info = EM2800_BOARD_GRABBEEX_USB2800 }, |
| { USB_DEVICE(0xeb1a, 0xe357), |
| .driver_info = EM2870_BOARD_KWORLD_355U }, |
| { USB_DEVICE(0xeb1a, 0xe359), |
| .driver_info = EM2870_BOARD_KWORLD_355U }, |
| { USB_DEVICE(0x1b80, 0xe302), |
| .driver_info = EM2820_BOARD_PINNACLE_DVC_90 }, /* Kaiser Baas Video to DVD maker */ |
| { USB_DEVICE(0x1b80, 0xe304), |
| .driver_info = EM2820_BOARD_PINNACLE_DVC_90 }, /* Kworld DVD Maker 2 */ |
| { USB_DEVICE(0x0ccd, 0x0036), |
| .driver_info = EM2820_BOARD_TERRATEC_CINERGY_250 }, |
| { USB_DEVICE(0x0ccd, 0x004c), |
| .driver_info = EM2880_BOARD_TERRATEC_HYBRID_XS_FR }, |
| { USB_DEVICE(0x0ccd, 0x004f), |
| .driver_info = EM2860_BOARD_TERRATEC_HYBRID_XS }, |
| { USB_DEVICE(0x0ccd, 0x005e), |
| .driver_info = EM2882_BOARD_TERRATEC_HYBRID_XS }, |
| { USB_DEVICE(0x0ccd, 0x0042), |
| .driver_info = EM2882_BOARD_TERRATEC_HYBRID_XS }, |
| { USB_DEVICE(0x0ccd, 0x0043), |
| .driver_info = EM2870_BOARD_TERRATEC_XS }, |
| { USB_DEVICE(0x0ccd, 0x008e), /* Cinergy HTC USB XS Rev. 1 */ |
| .driver_info = EM2884_BOARD_TERRATEC_HTC_USB_XS }, |
| { USB_DEVICE(0x0ccd, 0x00ac), /* Cinergy HTC USB XS Rev. 2 */ |
| .driver_info = EM2884_BOARD_TERRATEC_HTC_USB_XS }, |
| { USB_DEVICE(0x0ccd, 0x10a2), /* H5 Rev. 1 */ |
| .driver_info = EM2884_BOARD_TERRATEC_H5 }, |
| { USB_DEVICE(0x0ccd, 0x10ad), /* H5 Rev. 2 */ |
| .driver_info = EM2884_BOARD_TERRATEC_H5 }, |
| { USB_DEVICE(0x0ccd, 0x10b6), /* H5 Rev. 3 */ |
| .driver_info = EM2884_BOARD_TERRATEC_H5 }, |
| { USB_DEVICE(0x0ccd, 0x0084), |
| .driver_info = EM2860_BOARD_TERRATEC_AV350 }, |
| { USB_DEVICE(0x0ccd, 0x0096), |
| .driver_info = EM2860_BOARD_TERRATEC_GRABBY }, |
| { USB_DEVICE(0x0ccd, 0x10AF), |
| .driver_info = EM2860_BOARD_TERRATEC_GRABBY }, |
| { USB_DEVICE(0x0ccd, 0x00b2), |
| .driver_info = EM2884_BOARD_CINERGY_HTC_STICK }, |
| { USB_DEVICE(0x0fd9, 0x0033), |
| .driver_info = EM2860_BOARD_ELGATO_VIDEO_CAPTURE}, |
| { USB_DEVICE(0x185b, 0x2870), |
| .driver_info = EM2870_BOARD_COMPRO_VIDEOMATE }, |
| { USB_DEVICE(0x185b, 0x2041), |
| .driver_info = EM2820_BOARD_COMPRO_VIDEOMATE_FORYOU }, |
| { USB_DEVICE(0x2040, 0x4200), |
| .driver_info = EM2820_BOARD_HAUPPAUGE_WINTV_USB_2 }, |
| { USB_DEVICE(0x2040, 0x4201), |
| .driver_info = EM2820_BOARD_HAUPPAUGE_WINTV_USB_2 }, |
| { USB_DEVICE(0x2040, 0x6500), |
| .driver_info = EM2880_BOARD_HAUPPAUGE_WINTV_HVR_900 }, |
| { USB_DEVICE(0x2040, 0x6502), |
| .driver_info = EM2880_BOARD_HAUPPAUGE_WINTV_HVR_900_R2 }, |
| { USB_DEVICE(0x2040, 0x6513), /* HCW HVR-980 */ |
| .driver_info = EM2883_BOARD_HAUPPAUGE_WINTV_HVR_950 }, |
| { USB_DEVICE(0x2040, 0x6517), /* HP HVR-950 */ |
| .driver_info = EM2883_BOARD_HAUPPAUGE_WINTV_HVR_950 }, |
| { USB_DEVICE(0x2040, 0x651b), /* RP HVR-950 */ |
| .driver_info = EM2883_BOARD_HAUPPAUGE_WINTV_HVR_950 }, |
| { USB_DEVICE(0x2040, 0x651f), |
| .driver_info = EM2883_BOARD_HAUPPAUGE_WINTV_HVR_850 }, |
| { USB_DEVICE(0x0438, 0xb002), |
| .driver_info = EM2880_BOARD_AMD_ATI_TV_WONDER_HD_600 }, |
| { USB_DEVICE(0x2001, 0xf112), |
| .driver_info = EM2820_BOARD_DLINK_USB_TV }, |
| { USB_DEVICE(0x2304, 0x0207), |
| .driver_info = EM2820_BOARD_PINNACLE_DVC_90 }, |
| { USB_DEVICE(0x2304, 0x0208), |
| .driver_info = EM2820_BOARD_PINNACLE_USB_2 }, |
| { USB_DEVICE(0x2304, 0x021a), |
| .driver_info = EM2820_BOARD_PINNACLE_DVC_90 }, |
| { USB_DEVICE(0x2304, 0x0226), |
| .driver_info = EM2882_BOARD_PINNACLE_HYBRID_PRO_330E }, |
| { USB_DEVICE(0x2304, 0x0227), |
| .driver_info = EM2880_BOARD_PINNACLE_PCTV_HD_PRO }, |
| { USB_DEVICE(0x0413, 0x6023), |
| .driver_info = EM2800_BOARD_LEADTEK_WINFAST_USBII }, |
| { USB_DEVICE(0x093b, 0xa003), |
| .driver_info = EM2820_BOARD_PINNACLE_DVC_90 }, |
| { USB_DEVICE(0x093b, 0xa005), |
| .driver_info = EM2861_BOARD_PLEXTOR_PX_TV100U }, |
| { USB_DEVICE(0x04bb, 0x0515), |
| .driver_info = EM2820_BOARD_IODATA_GVMVP_SZ }, |
| { USB_DEVICE(0xeb1a, 0x50a6), |
| .driver_info = EM2860_BOARD_GADMEI_UTV330 }, |
| { USB_DEVICE(0x1b80, 0xa340), |
| .driver_info = EM2870_BOARD_KWORLD_A340 }, |
| { USB_DEVICE(0x2013, 0x024f), |
| .driver_info = EM28174_BOARD_PCTV_290E }, |
| { USB_DEVICE(0x2013, 0x024c), |
| .driver_info = EM28174_BOARD_PCTV_460E }, |
| { USB_DEVICE(0x2040, 0x1605), |
| .driver_info = EM2884_BOARD_HAUPPAUGE_WINTV_HVR_930C }, |
| { USB_DEVICE(0x1b80, 0xe755), |
| .driver_info = EM2884_BOARD_C3TECH_DIGITAL_DUO }, |
| { USB_DEVICE(0xeb1a, 0x5006), |
| .driver_info = EM2860_BOARD_HT_VIDBOX_NW03 }, |
| { USB_DEVICE(0x1b80, 0xe309), /* Sveon STV40 */ |
| .driver_info = EM2860_BOARD_EASYCAP }, |
| { USB_DEVICE(0x1b80, 0xe425), |
| .driver_info = EM2874_BOARD_MAXMEDIA_UB425_TC }, |
| { USB_DEVICE(0x2304, 0x0242), |
| .driver_info = EM2884_BOARD_PCTV_510E }, |
| { USB_DEVICE(0x2013, 0x0251), |
| .driver_info = EM2884_BOARD_PCTV_520E }, |
| { USB_DEVICE(0x1b80, 0xe1cc), |
| .driver_info = EM2874_BOARD_DELOCK_61959 }, |
| { }, |
| }; |
| MODULE_DEVICE_TABLE(usb, em28xx_id_table); |
| |
| /* |
| * EEPROM hash table for devices with generic USB IDs |
| */ |
| static struct em28xx_hash_table em28xx_eeprom_hash[] = { |
| /* P/N: SA 60002070465 Tuner: TVF7533-MF */ |
| {0x6ce05a8f, EM2820_BOARD_PROLINK_PLAYTV_USB2, TUNER_YMEC_TVF_5533MF}, |
| {0x72cc5a8b, EM2820_BOARD_PROLINK_PLAYTV_BOX4_USB2, TUNER_YMEC_TVF_5533MF}, |
| {0x966a0441, EM2880_BOARD_KWORLD_DVB_310U, TUNER_XC2028}, |
| {0x166a0441, EM2880_BOARD_EMPIRE_DUAL_TV, TUNER_XC2028}, |
| {0xcee44a99, EM2882_BOARD_EVGA_INDTUBE, TUNER_XC2028}, |
| {0xb8846b20, EM2881_BOARD_PINNACLE_HYBRID_PRO, TUNER_XC2028}, |
| {0x63f653bd, EM2870_BOARD_REDDO_DVB_C_USB_BOX, TUNER_ABSENT}, |
| {0x4e913442, EM2882_BOARD_DIKOM_DK300, TUNER_XC2028}, |
| }; |
| |
| /* I2C devicelist hash table for devices with generic USB IDs */ |
| static struct em28xx_hash_table em28xx_i2c_hash[] = { |
| {0xb06a32c3, EM2800_BOARD_TERRATEC_CINERGY_200, TUNER_LG_PAL_NEW_TAPC}, |
| {0xf51200e3, EM2800_BOARD_VGEAR_POCKETTV, TUNER_LG_PAL_NEW_TAPC}, |
| {0x1ba50080, EM2860_BOARD_SAA711X_REFERENCE_DESIGN, TUNER_ABSENT}, |
| {0x77800080, EM2860_BOARD_TVP5150_REFERENCE_DESIGN, TUNER_ABSENT}, |
| {0xc51200e3, EM2820_BOARD_GADMEI_TVR200, TUNER_LG_PAL_NEW_TAPC}, |
| {0x4ba50080, EM2861_BOARD_GADMEI_UTV330PLUS, TUNER_TNF_5335MF}, |
| {0x6b800080, EM2874_BOARD_LEADERSHIP_ISDBT, TUNER_ABSENT}, |
| }; |
| /* NOTE: introduce a separate hash table for devices with 16 bit eeproms */ |
| |
| /* I2C possible address to saa7115, tvp5150, msp3400, tvaudio */ |
| static unsigned short saa711x_addrs[] = { |
| 0x4a >> 1, 0x48 >> 1, /* SAA7111, SAA7111A and SAA7113 */ |
| 0x42 >> 1, 0x40 >> 1, /* SAA7114, SAA7115 and SAA7118 */ |
| I2C_CLIENT_END }; |
| |
| static unsigned short tvp5150_addrs[] = { |
| 0xb8 >> 1, |
| 0xba >> 1, |
| I2C_CLIENT_END |
| }; |
| |
| static unsigned short msp3400_addrs[] = { |
| 0x80 >> 1, |
| 0x88 >> 1, |
| I2C_CLIENT_END |
| }; |
| |
| int em28xx_tuner_callback(void *ptr, int component, int command, int arg) |
| { |
| struct em28xx_i2c_bus *i2c_bus = ptr; |
| struct em28xx *dev = i2c_bus->dev; |
| int rc = 0; |
| |
| if (dev->tuner_type != TUNER_XC2028 && dev->tuner_type != TUNER_XC5000) |
| return 0; |
| |
| if (command != XC2028_TUNER_RESET && command != XC5000_TUNER_RESET) |
| return 0; |
| |
| rc = em28xx_gpio_set(dev, dev->board.tuner_gpio); |
| |
| return rc; |
| } |
| EXPORT_SYMBOL_GPL(em28xx_tuner_callback); |
| |
| static inline void em28xx_set_model(struct em28xx *dev) |
| { |
| dev->board = em28xx_boards[dev->model]; |
| |
| /* Those are the default values for the majority of boards |
| Use those values if not specified otherwise at boards entry |
| */ |
| if (!dev->board.xclk) |
| dev->board.xclk = EM28XX_XCLK_IR_RC5_MODE | |
| EM28XX_XCLK_FREQUENCY_12MHZ; |
| |
| if (!dev->board.i2c_speed) |
| dev->board.i2c_speed = EM28XX_I2C_CLK_WAIT_ENABLE | |
| EM28XX_I2C_FREQ_100_KHZ; |
| |
| /* Should be initialized early, for I2C to work */ |
| dev->def_i2c_bus = dev->board.def_i2c_bus; |
| } |
| |
| /* Since em28xx_pre_card_setup() requires a proper dev->model, |
| * this won't work for boards with generic PCI IDs |
| */ |
| static void em28xx_pre_card_setup(struct em28xx *dev) |
| { |
| /* Set the initial XCLK and I2C clock values based on the board |
| definition */ |
| em28xx_write_reg(dev, EM28XX_R0F_XCLK, dev->board.xclk & 0x7f); |
| if (!dev->board.is_em2800) |
| em28xx_write_reg(dev, EM28XX_R06_I2C_CLK, dev->board.i2c_speed); |
| msleep(50); |
| |
| /* request some modules */ |
| switch (dev->model) { |
| case EM2861_BOARD_PLEXTOR_PX_TV100U: |
| /* Sets the msp34xx I2S speed */ |
| dev->i2s_speed = 2048000; |
| break; |
| case EM2861_BOARD_KWORLD_PVRTV_300U: |
| case EM2880_BOARD_KWORLD_DVB_305U: |
| em28xx_write_reg(dev, EM2820_R08_GPIO_CTRL, 0x6d); |
| msleep(10); |
| em28xx_write_reg(dev, EM2820_R08_GPIO_CTRL, 0x7d); |
| msleep(10); |
| break; |
| case EM2870_BOARD_COMPRO_VIDEOMATE: |
| /* TODO: someone can do some cleanup here... |
| not everything's needed */ |
| em28xx_write_reg(dev, EM2880_R04_GPO, 0x00); |
| msleep(10); |
| em28xx_write_reg(dev, EM2880_R04_GPO, 0x01); |
| msleep(10); |
| em28xx_write_reg(dev, EM2820_R08_GPIO_CTRL, 0xfd); |
| mdelay(70); |
| em28xx_write_reg(dev, EM2820_R08_GPIO_CTRL, 0xfc); |
| mdelay(70); |
| em28xx_write_reg(dev, EM2820_R08_GPIO_CTRL, 0xdc); |
| mdelay(70); |
| em28xx_write_reg(dev, EM2820_R08_GPIO_CTRL, 0xfc); |
| mdelay(70); |
| break; |
| case EM2870_BOARD_TERRATEC_XS_MT2060: |
| /* this device needs some gpio writes to get the DVB-T |
| demod work */ |
| em28xx_write_reg(dev, EM2820_R08_GPIO_CTRL, 0xfe); |
| mdelay(70); |
| em28xx_write_reg(dev, EM2820_R08_GPIO_CTRL, 0xde); |
| mdelay(70); |
| em28xx_write_reg(dev, EM2820_R08_GPIO_CTRL, 0xfe); |
| mdelay(70); |
| break; |
| case EM2870_BOARD_PINNACLE_PCTV_DVB: |
| /* this device needs some gpio writes to get the |
| DVB-T demod work */ |
| em28xx_write_reg(dev, EM2820_R08_GPIO_CTRL, 0xfe); |
| mdelay(70); |
| em28xx_write_reg(dev, EM2820_R08_GPIO_CTRL, 0xde); |
| mdelay(70); |
| em28xx_write_reg(dev, EM2820_R08_GPIO_CTRL, 0xfe); |
| mdelay(70); |
| break; |
| case EM2820_BOARD_GADMEI_UTV310: |
| case EM2820_BOARD_MSI_VOX_USB_2: |
| /* enables audio for that devices */ |
| em28xx_write_reg(dev, EM2820_R08_GPIO_CTRL, 0xfd); |
| break; |
| |
| case EM2882_BOARD_KWORLD_ATSC_315U: |
| em28xx_write_reg(dev, EM2820_R08_GPIO_CTRL, 0xff); |
| msleep(10); |
| em28xx_write_reg(dev, EM2820_R08_GPIO_CTRL, 0xfe); |
| msleep(10); |
| em28xx_write_reg(dev, EM2880_R04_GPO, 0x00); |
| msleep(10); |
| em28xx_write_reg(dev, EM2880_R04_GPO, 0x08); |
| msleep(10); |
| break; |
| |
| case EM2860_BOARD_KAIOMY_TVNPC_U2: |
| em28xx_write_regs(dev, EM28XX_R0F_XCLK, "\x07", 1); |
| em28xx_write_regs(dev, EM28XX_R06_I2C_CLK, "\x40", 1); |
| em28xx_write_regs(dev, 0x0d, "\x42", 1); |
| em28xx_write_regs(dev, 0x08, "\xfd", 1); |
| msleep(10); |
| em28xx_write_regs(dev, 0x08, "\xff", 1); |
| msleep(10); |
| em28xx_write_regs(dev, 0x08, "\x7f", 1); |
| msleep(10); |
| em28xx_write_regs(dev, 0x08, "\x6b", 1); |
| |
| break; |
| case EM2860_BOARD_EASYCAP: |
| em28xx_write_regs(dev, 0x08, "\xf8", 1); |
| break; |
| |
| case EM2820_BOARD_IODATA_GVMVP_SZ: |
| em28xx_write_reg(dev, EM2820_R08_GPIO_CTRL, 0xff); |
| msleep(70); |
| em28xx_write_reg(dev, EM2820_R08_GPIO_CTRL, 0xf7); |
| msleep(10); |
| em28xx_write_reg(dev, EM2820_R08_GPIO_CTRL, 0xfe); |
| msleep(70); |
| em28xx_write_reg(dev, EM2820_R08_GPIO_CTRL, 0xfd); |
| msleep(70); |
| break; |
| } |
| |
| em28xx_gpio_set(dev, dev->board.tuner_gpio); |
| em28xx_set_mode(dev, EM28XX_ANALOG_MODE); |
| |
| /* Unlock device */ |
| em28xx_set_mode(dev, EM28XX_SUSPEND); |
| } |
| |
| static void em28xx_setup_xc3028(struct em28xx *dev, struct xc2028_ctrl *ctl) |
| { |
| memset(ctl, 0, sizeof(*ctl)); |
| |
| ctl->fname = XC2028_DEFAULT_FIRMWARE; |
| ctl->max_len = 64; |
| ctl->mts = em28xx_boards[dev->model].mts_firmware; |
| |
| switch (dev->model) { |
| case EM2880_BOARD_EMPIRE_DUAL_TV: |
| case EM2880_BOARD_HAUPPAUGE_WINTV_HVR_900: |
| case EM2882_BOARD_TERRATEC_HYBRID_XS: |
| ctl->demod = XC3028_FE_ZARLINK456; |
| break; |
| case EM2880_BOARD_TERRATEC_HYBRID_XS: |
| case EM2880_BOARD_TERRATEC_HYBRID_XS_FR: |
| case EM2881_BOARD_PINNACLE_HYBRID_PRO: |
| ctl->demod = XC3028_FE_ZARLINK456; |
| break; |
| case EM2880_BOARD_HAUPPAUGE_WINTV_HVR_900_R2: |
| case EM2882_BOARD_PINNACLE_HYBRID_PRO_330E: |
| ctl->demod = XC3028_FE_DEFAULT; |
| break; |
| case EM2880_BOARD_AMD_ATI_TV_WONDER_HD_600: |
| ctl->demod = XC3028_FE_DEFAULT; |
| ctl->fname = XC3028L_DEFAULT_FIRMWARE; |
| break; |
| case EM2883_BOARD_HAUPPAUGE_WINTV_HVR_850: |
| case EM2883_BOARD_HAUPPAUGE_WINTV_HVR_950: |
| case EM2880_BOARD_PINNACLE_PCTV_HD_PRO: |
| /* FIXME: Better to specify the needed IF */ |
| ctl->demod = XC3028_FE_DEFAULT; |
| break; |
| case EM2883_BOARD_KWORLD_HYBRID_330U: |
| case EM2882_BOARD_DIKOM_DK300: |
| case EM2882_BOARD_KWORLD_VS_DVBT: |
| ctl->demod = XC3028_FE_CHINA; |
| ctl->fname = XC2028_DEFAULT_FIRMWARE; |
| break; |
| case EM2882_BOARD_EVGA_INDTUBE: |
| ctl->demod = XC3028_FE_CHINA; |
| ctl->fname = XC3028L_DEFAULT_FIRMWARE; |
| break; |
| default: |
| ctl->demod = XC3028_FE_OREN538; |
| } |
| } |
| |
| static void em28xx_tuner_setup(struct em28xx *dev) |
| { |
| struct tuner_setup tun_setup; |
| struct v4l2_frequency f; |
| |
| if (dev->tuner_type == TUNER_ABSENT) |
| return; |
| |
| memset(&tun_setup, 0, sizeof(tun_setup)); |
| |
| tun_setup.mode_mask = T_ANALOG_TV | T_RADIO; |
| tun_setup.tuner_callback = em28xx_tuner_callback; |
| |
| if (dev->board.radio.type) { |
| tun_setup.type = dev->board.radio.type; |
| tun_setup.addr = dev->board.radio_addr; |
| |
| v4l2_device_call_all(&dev->v4l2_dev, 0, tuner, s_type_addr, &tun_setup); |
| } |
| |
| if ((dev->tuner_type != TUNER_ABSENT) && (dev->tuner_type)) { |
| tun_setup.type = dev->tuner_type; |
| tun_setup.addr = dev->tuner_addr; |
| |
| v4l2_device_call_all(&dev->v4l2_dev, 0, tuner, s_type_addr, &tun_setup); |
| } |
| |
| if (dev->tda9887_conf) { |
| struct v4l2_priv_tun_config tda9887_cfg; |
| |
| tda9887_cfg.tuner = TUNER_TDA9887; |
| tda9887_cfg.priv = &dev->tda9887_conf; |
| |
| v4l2_device_call_all(&dev->v4l2_dev, 0, tuner, s_config, &tda9887_cfg); |
| } |
| |
| if (dev->tuner_type == TUNER_XC2028) { |
| struct v4l2_priv_tun_config xc2028_cfg; |
| struct xc2028_ctrl ctl; |
| |
| memset(&xc2028_cfg, 0, sizeof(xc2028_cfg)); |
| memset(&ctl, 0, sizeof(ctl)); |
| |
| em28xx_setup_xc3028(dev, &ctl); |
| |
| xc2028_cfg.tuner = TUNER_XC2028; |
| xc2028_cfg.priv = &ctl; |
| |
| v4l2_device_call_all(&dev->v4l2_dev, 0, tuner, s_config, &xc2028_cfg); |
| } |
| |
| /* configure tuner */ |
| f.tuner = 0; |
| f.type = V4L2_TUNER_ANALOG_TV; |
| f.frequency = 9076; /* just a magic number */ |
| dev->ctl_freq = f.frequency; |
| v4l2_device_call_all(&dev->v4l2_dev, 0, tuner, s_frequency, &f); |
| } |
| |
| static int em28xx_hint_board(struct em28xx *dev) |
| { |
| int i; |
| |
| if (dev->board.is_webcam) { |
| if (dev->em28xx_sensor == EM28XX_MT9V011) { |
| dev->model = EM2820_BOARD_SILVERCREST_WEBCAM; |
| } else if (dev->em28xx_sensor == EM28XX_MT9M001 || |
| dev->em28xx_sensor == EM28XX_MT9M111) { |
| dev->model = EM2750_BOARD_UNKNOWN; |
| } |
| /* FIXME: IMPROVE ! */ |
| |
| return 0; |
| } |
| |
| /* HINT method: EEPROM |
| * |
| * This method works only for boards with eeprom. |
| * Uses a hash of all eeprom bytes. The hash should be |
| * unique for a vendor/tuner pair. |
| * There are a high chance that tuners for different |
| * video standards produce different hashes. |
| */ |
| for (i = 0; i < ARRAY_SIZE(em28xx_eeprom_hash); i++) { |
| if (dev->hash == em28xx_eeprom_hash[i].hash) { |
| dev->model = em28xx_eeprom_hash[i].model; |
| dev->tuner_type = em28xx_eeprom_hash[i].tuner; |
| |
| em28xx_errdev("Your board has no unique USB ID.\n"); |
| em28xx_errdev("A hint were successfully done, " |
| "based on eeprom hash.\n"); |
| em28xx_errdev("This method is not 100%% failproof.\n"); |
| em28xx_errdev("If the board were missdetected, " |
| "please email this log to:\n"); |
| em28xx_errdev("\tV4L Mailing List " |
| " <linux-media@vger.kernel.org>\n"); |
| em28xx_errdev("Board detected as %s\n", |
| em28xx_boards[dev->model].name); |
| |
| return 0; |
| } |
| } |
| |
| /* HINT method: I2C attached devices |
| * |
| * This method works for all boards. |
| * Uses a hash of i2c scanned devices. |
| * Devices with the same i2c attached chips will |
| * be considered equal. |
| * This method is less precise than the eeprom one. |
| */ |
| |
| /* user did not request i2c scanning => do it now */ |
| if (!dev->i2c_hash) |
| em28xx_do_i2c_scan(dev, dev->def_i2c_bus); |
| |
| for (i = 0; i < ARRAY_SIZE(em28xx_i2c_hash); i++) { |
| if (dev->i2c_hash == em28xx_i2c_hash[i].hash) { |
| dev->model = em28xx_i2c_hash[i].model; |
| dev->tuner_type = em28xx_i2c_hash[i].tuner; |
| em28xx_errdev("Your board has no unique USB ID.\n"); |
| em28xx_errdev("A hint were successfully done, " |
| "based on i2c devicelist hash.\n"); |
| em28xx_errdev("This method is not 100%% failproof.\n"); |
| em28xx_errdev("If the board were missdetected, " |
| "please email this log to:\n"); |
| em28xx_errdev("\tV4L Mailing List " |
| " <linux-media@vger.kernel.org>\n"); |
| em28xx_errdev("Board detected as %s\n", |
| em28xx_boards[dev->model].name); |
| |
| return 0; |
| } |
| } |
| |
| em28xx_errdev("Your board has no unique USB ID and thus need a " |
| "hint to be detected.\n"); |
| em28xx_errdev("You may try to use card=<n> insmod option to " |
| "workaround that.\n"); |
| em28xx_errdev("Please send an email with this log to:\n"); |
| em28xx_errdev("\tV4L Mailing List <linux-media@vger.kernel.org>\n"); |
| em28xx_errdev("Board eeprom hash is 0x%08lx\n", dev->hash); |
| em28xx_errdev("Board i2c devicelist hash is 0x%08lx\n", dev->i2c_hash); |
| |
| em28xx_errdev("Here is a list of valid choices for the card=<n>" |
| " insmod option:\n"); |
| for (i = 0; i < em28xx_bcount; i++) { |
| em28xx_errdev(" card=%d -> %s\n", |
| i, em28xx_boards[i].name); |
| } |
| return -1; |
| } |
| |
| static void em28xx_card_setup(struct em28xx *dev) |
| { |
| /* |
| * If the device can be a webcam, seek for a sensor. |
| * If sensor is not found, then it isn't a webcam. |
| */ |
| if (dev->board.is_webcam) { |
| if (em28xx_detect_sensor(dev) < 0) |
| dev->board.is_webcam = 0; |
| else |
| dev->progressive = 1; |
| } |
| |
| switch (dev->model) { |
| case EM2750_BOARD_UNKNOWN: |
| case EM2820_BOARD_UNKNOWN: |
| case EM2800_BOARD_UNKNOWN: |
| /* |
| * The K-WORLD DVB-T 310U is detected as an MSI Digivox AD. |
| * |
| * This occurs because they share identical USB vendor and |
| * product IDs. |
| * |
| * What we do here is look up the EEPROM hash of the K-WORLD |
| * and if it is found then we decide that we do not have |
| * a DIGIVOX and reset the device to the K-WORLD instead. |
| * |
| * This solution is only valid if they do not share eeprom |
| * hash identities which has not been determined as yet. |
| */ |
| if (em28xx_hint_board(dev) < 0) |
| em28xx_errdev("Board not discovered\n"); |
| else { |
| em28xx_set_model(dev); |
| em28xx_pre_card_setup(dev); |
| } |
| break; |
| default: |
| em28xx_set_model(dev); |
| } |
| |
| em28xx_info("Identified as %s (card=%d)\n", |
| dev->board.name, dev->model); |
| |
| dev->tuner_type = em28xx_boards[dev->model].tuner_type; |
| if (em28xx_boards[dev->model].tuner_addr) |
| dev->tuner_addr = em28xx_boards[dev->model].tuner_addr; |
| |
| if (em28xx_boards[dev->model].tda9887_conf) |
| dev->tda9887_conf = em28xx_boards[dev->model].tda9887_conf; |
| |
| /* request some modules */ |
| switch (dev->model) { |
| case EM2820_BOARD_HAUPPAUGE_WINTV_USB_2: |
| case EM2880_BOARD_HAUPPAUGE_WINTV_HVR_900: |
| case EM2880_BOARD_HAUPPAUGE_WINTV_HVR_900_R2: |
| case EM2883_BOARD_HAUPPAUGE_WINTV_HVR_850: |
| case EM2883_BOARD_HAUPPAUGE_WINTV_HVR_950: |
| case EM2884_BOARD_HAUPPAUGE_WINTV_HVR_930C: |
| { |
| struct tveeprom tv; |
| |
| if (dev->eedata == NULL) |
| break; |
| #if defined(CONFIG_MODULES) && defined(MODULE) |
| request_module("tveeprom"); |
| #endif |
| /* Call first TVeeprom */ |
| |
| dev->i2c_client[dev->def_i2c_bus].addr = 0xa0 >> 1; |
| tveeprom_hauppauge_analog(&dev->i2c_client[dev->def_i2c_bus], &tv, dev->eedata); |
| |
| dev->tuner_type = tv.tuner_type; |
| |
| if (tv.audio_processor == TVEEPROM_AUDPROC_MSP) { |
| dev->i2s_speed = 2048000; |
| dev->board.has_msp34xx = 1; |
| } |
| break; |
| } |
| case EM2882_BOARD_KWORLD_ATSC_315U: |
| em28xx_write_reg(dev, 0x0d, 0x42); |
| msleep(10); |
| em28xx_write_reg(dev, EM2820_R08_GPIO_CTRL, 0xfd); |
| msleep(10); |
| break; |
| case EM2820_BOARD_KWORLD_PVRTV2800RF: |
| /* GPIO enables sound on KWORLD PVR TV 2800RF */ |
| em28xx_write_reg(dev, EM2820_R08_GPIO_CTRL, 0xf9); |
| break; |
| case EM2820_BOARD_UNKNOWN: |
| case EM2800_BOARD_UNKNOWN: |
| /* |
| * The K-WORLD DVB-T 310U is detected as an MSI Digivox AD. |
| * |
| * This occurs because they share identical USB vendor and |
| * product IDs. |
| * |
| * What we do here is look up the EEPROM hash of the K-WORLD |
| * and if it is found then we decide that we do not have |
| * a DIGIVOX and reset the device to the K-WORLD instead. |
| * |
| * This solution is only valid if they do not share eeprom |
| * hash identities which has not been determined as yet. |
| */ |
| case EM2880_BOARD_MSI_DIGIVOX_AD: |
| if (!em28xx_hint_board(dev)) |
| em28xx_set_model(dev); |
| |
| /* In cases where we had to use a board hint, the call to |
| em28xx_set_mode() in em28xx_pre_card_setup() was a no-op, |
| so make the call now so the analog GPIOs are set properly |
| before probing the i2c bus. */ |
| em28xx_gpio_set(dev, dev->board.tuner_gpio); |
| em28xx_set_mode(dev, EM28XX_ANALOG_MODE); |
| break; |
| |
| /* |
| * The Dikom DK300 is detected as an Kworld VS-DVB-T 323UR. |
| * |
| * This occurs because they share identical USB vendor and |
| * product IDs. |
| * |
| * What we do here is look up the EEPROM hash of the Dikom |
| * and if it is found then we decide that we do not have |
| * a Kworld and reset the device to the Dikom instead. |
| * |
| * This solution is only valid if they do not share eeprom |
| * hash identities which has not been determined as yet. |
| */ |
| case EM2882_BOARD_KWORLD_VS_DVBT: |
| if (!em28xx_hint_board(dev)) |
| em28xx_set_model(dev); |
| |
| /* In cases where we had to use a board hint, the call to |
| em28xx_set_mode() in em28xx_pre_card_setup() was a no-op, |
| so make the call now so the analog GPIOs are set properly |
| before probing the i2c bus. */ |
| em28xx_gpio_set(dev, dev->board.tuner_gpio); |
| em28xx_set_mode(dev, EM28XX_ANALOG_MODE); |
| break; |
| } |
| |
| if (dev->board.valid == EM28XX_BOARD_NOT_VALIDATED) { |
| em28xx_errdev("\n\n"); |
| em28xx_errdev("The support for this board weren't " |
| "valid yet.\n"); |
| em28xx_errdev("Please send a report of having this working\n"); |
| em28xx_errdev("not to V4L mailing list (and/or to other " |
| "addresses)\n\n"); |
| } |
| |
| /* Free eeprom data memory */ |
| kfree(dev->eedata); |
| dev->eedata = NULL; |
| |
| /* Allow override tuner type by a module parameter */ |
| if (tuner >= 0) |
| dev->tuner_type = tuner; |
| |
| /* request some modules */ |
| if (dev->board.has_msp34xx) |
| v4l2_i2c_new_subdev(&dev->v4l2_dev, &dev->i2c_adap[dev->def_i2c_bus], |
| "msp3400", 0, msp3400_addrs); |
| |
| if (dev->board.decoder == EM28XX_SAA711X) |
| v4l2_i2c_new_subdev(&dev->v4l2_dev, &dev->i2c_adap[dev->def_i2c_bus], |
| "saa7115_auto", 0, saa711x_addrs); |
| |
| if (dev->board.decoder == EM28XX_TVP5150) |
| v4l2_i2c_new_subdev(&dev->v4l2_dev, &dev->i2c_adap[dev->def_i2c_bus], |
| "tvp5150", 0, tvp5150_addrs); |
| |
| if (dev->board.adecoder == EM28XX_TVAUDIO) |
| v4l2_i2c_new_subdev(&dev->v4l2_dev, &dev->i2c_adap[dev->def_i2c_bus], |
| "tvaudio", dev->board.tvaudio_addr, NULL); |
| |
| if (dev->board.tuner_type != TUNER_ABSENT) { |
| int has_demod = (dev->tda9887_conf & TDA9887_PRESENT); |
| |
| if (dev->board.radio.type) |
| v4l2_i2c_new_subdev(&dev->v4l2_dev, &dev->i2c_adap[dev->def_i2c_bus], |
| "tuner", dev->board.radio_addr, NULL); |
| |
| if (has_demod) |
| v4l2_i2c_new_subdev(&dev->v4l2_dev, |
| &dev->i2c_adap[dev->def_i2c_bus], "tuner", |
| 0, v4l2_i2c_tuner_addrs(ADDRS_DEMOD)); |
| if (dev->tuner_addr == 0) { |
| enum v4l2_i2c_tuner_type type = |
| has_demod ? ADDRS_TV_WITH_DEMOD : ADDRS_TV; |
| struct v4l2_subdev *sd; |
| |
| sd = v4l2_i2c_new_subdev(&dev->v4l2_dev, |
| &dev->i2c_adap[dev->def_i2c_bus], "tuner", |
| 0, v4l2_i2c_tuner_addrs(type)); |
| |
| if (sd) |
| dev->tuner_addr = v4l2_i2c_subdev_addr(sd); |
| } else { |
| v4l2_i2c_new_subdev(&dev->v4l2_dev, &dev->i2c_adap[dev->def_i2c_bus], |
| "tuner", dev->tuner_addr, NULL); |
| } |
| } |
| |
| em28xx_tuner_setup(dev); |
| |
| em28xx_init_camera(dev); |
| } |
| |
| |
| static void request_module_async(struct work_struct *work) |
| { |
| struct em28xx *dev = container_of(work, |
| struct em28xx, request_module_wk); |
| |
| /* |
| * The em28xx extensions can be modules or builtin. If the |
| * modules are already loaded or are built in, those extensions |
| * can be initialised right now. Otherwise, the module init |
| * code will do it. |
| */ |
| em28xx_init_extension(dev); |
| |
| #if defined(CONFIG_MODULES) && defined(MODULE) |
| if (dev->has_audio_class) |
| request_module("snd-usb-audio"); |
| else if (dev->has_alsa_audio) |
| request_module("em28xx-alsa"); |
| |
| if (dev->board.has_dvb) |
| request_module("em28xx-dvb"); |
| if (dev->board.has_snapshot_button || |
| ((dev->board.ir_codes || dev->board.has_ir_i2c) && !disable_ir)) |
| request_module("em28xx-rc"); |
| #endif /* CONFIG_MODULES */ |
| } |
| |
| static void request_modules(struct em28xx *dev) |
| { |
| INIT_WORK(&dev->request_module_wk, request_module_async); |
| schedule_work(&dev->request_module_wk); |
| } |
| |
| static void flush_request_modules(struct em28xx *dev) |
| { |
| flush_work(&dev->request_module_wk); |
| } |
| |
| /* |
| * em28xx_release_resources() |
| * unregisters the v4l2,i2c and usb devices |
| * called when the device gets disconnected or at module unload |
| */ |
| void em28xx_release_resources(struct em28xx *dev) |
| { |
| /*FIXME: I2C IR should be disconnected */ |
| |
| em28xx_release_analog_resources(dev); |
| |
| if (dev->def_i2c_bus) |
| em28xx_i2c_unregister(dev, 1); |
| em28xx_i2c_unregister(dev, 0); |
| if (dev->clk) |
| v4l2_clk_unregister_fixed(dev->clk); |
| |
| v4l2_ctrl_handler_free(&dev->ctrl_handler); |
| |
| v4l2_device_unregister(&dev->v4l2_dev); |
| |
| usb_put_dev(dev->udev); |
| |
| /* Mark device as unused */ |
| clear_bit(dev->devno, &em28xx_devused); |
| }; |
| |
| /* |
| * em28xx_init_dev() |
| * allocates and inits the device structs, registers i2c bus and v4l device |
| */ |
| static int em28xx_init_dev(struct em28xx *dev, struct usb_device *udev, |
| struct usb_interface *interface, |
| int minor) |
| { |
| struct v4l2_ctrl_handler *hdl = &dev->ctrl_handler; |
| int retval; |
| static const char *default_chip_name = "em28xx"; |
| const char *chip_name = default_chip_name; |
| |
| dev->udev = udev; |
| mutex_init(&dev->vb_queue_lock); |
| mutex_init(&dev->vb_vbi_queue_lock); |
| mutex_init(&dev->ctrl_urb_lock); |
| spin_lock_init(&dev->slock); |
| |
| dev->em28xx_write_regs = em28xx_write_regs; |
| dev->em28xx_read_reg = em28xx_read_reg; |
| dev->em28xx_read_reg_req_len = em28xx_read_reg_req_len; |
| dev->em28xx_write_regs_req = em28xx_write_regs_req; |
| dev->em28xx_read_reg_req = em28xx_read_reg_req; |
| dev->board.is_em2800 = em28xx_boards[dev->model].is_em2800; |
| |
| em28xx_set_model(dev); |
| |
| dev->wait_after_write = 5; |
| |
| /* Based on the Chip ID, set the device configuration */ |
| retval = em28xx_read_reg(dev, EM28XX_R0A_CHIPID); |
| if (retval > 0) { |
| dev->chip_id = retval; |
| |
| switch (dev->chip_id) { |
| case CHIP_ID_EM2800: |
| chip_name = "em2800"; |
| break; |
| case CHIP_ID_EM2710: |
| chip_name = "em2710"; |
| break; |
| case CHIP_ID_EM2750: |
| chip_name = "em2750"; |
| break; |
| case CHIP_ID_EM2765: |
| chip_name = "em2765"; |
| dev->wait_after_write = 0; |
| dev->is_em25xx = 1; |
| dev->eeprom_addrwidth_16bit = 1; |
| break; |
| case CHIP_ID_EM2820: |
| chip_name = "em2710/2820"; |
| if (le16_to_cpu(dev->udev->descriptor.idVendor) |
| == 0xeb1a) { |
| __le16 idProd = dev->udev->descriptor.idProduct; |
| if (le16_to_cpu(idProd) == 0x2710) |
| chip_name = "em2710"; |
| else if (le16_to_cpu(idProd) == 0x2820) |
| chip_name = "em2820"; |
| } |
| /* NOTE: the em2820 is used in webcams, too ! */ |
| break; |
| case CHIP_ID_EM2840: |
| chip_name = "em2840"; |
| break; |
| case CHIP_ID_EM2860: |
| chip_name = "em2860"; |
| break; |
| case CHIP_ID_EM2870: |
| chip_name = "em2870"; |
| dev->wait_after_write = 0; |
| break; |
| case CHIP_ID_EM2874: |
| chip_name = "em2874"; |
| dev->wait_after_write = 0; |
| dev->eeprom_addrwidth_16bit = 1; |
| break; |
| case CHIP_ID_EM28174: |
| chip_name = "em28174"; |
| dev->wait_after_write = 0; |
| dev->eeprom_addrwidth_16bit = 1; |
| break; |
| case CHIP_ID_EM2883: |
| chip_name = "em2882/3"; |
| dev->wait_after_write = 0; |
| break; |
| case CHIP_ID_EM2884: |
| chip_name = "em2884"; |
| dev->wait_after_write = 0; |
| dev->eeprom_addrwidth_16bit = 1; |
| break; |
| default: |
| printk(KERN_INFO DRIVER_NAME |
| ": unknown em28xx chip ID (%d)\n", dev->chip_id); |
| } |
| } |
| |
| if (chip_name != default_chip_name) |
| printk(KERN_INFO DRIVER_NAME |
| ": chip ID is %s\n", chip_name); |
| |
| /* |
| * For em2820/em2710, the name may change latter, after checking |
| * if the device has a sensor (so, it is em2710) or not. |
| */ |
| snprintf(dev->name, sizeof(dev->name), "%s #%d", chip_name, dev->devno); |
| |
| if (dev->is_audio_only) { |
| retval = em28xx_audio_setup(dev); |
| if (retval) |
| return -ENODEV; |
| em28xx_init_extension(dev); |
| |
| return 0; |
| } |
| |
| em28xx_pre_card_setup(dev); |
| |
| if (!dev->board.is_em2800) { |
| /* Resets I2C speed */ |
| retval = em28xx_write_reg(dev, EM28XX_R06_I2C_CLK, dev->board.i2c_speed); |
| if (retval < 0) { |
| em28xx_errdev("%s: em28xx_write_reg failed!" |
| " retval [%d]\n", |
| __func__, retval); |
| return retval; |
| } |
| } |
| |
| retval = v4l2_device_register(&interface->dev, &dev->v4l2_dev); |
| if (retval < 0) { |
| em28xx_errdev("Call to v4l2_device_register() failed!\n"); |
| return retval; |
| } |
| |
| v4l2_ctrl_handler_init(hdl, 8); |
| dev->v4l2_dev.ctrl_handler = hdl; |
| |
| rt_mutex_init(&dev->i2c_bus_lock); |
| |
| /* register i2c bus 0 */ |
| if (dev->board.is_em2800) |
| retval = em28xx_i2c_register(dev, 0, EM28XX_I2C_ALGO_EM2800); |
| else |
| retval = em28xx_i2c_register(dev, 0, EM28XX_I2C_ALGO_EM28XX); |
| if (retval < 0) { |
| em28xx_errdev("%s: em28xx_i2c_register bus 0 - error [%d]!\n", |
| __func__, retval); |
| goto unregister_dev; |
| } |
| |
| /* register i2c bus 1 */ |
| if (dev->def_i2c_bus) { |
| if (dev->is_em25xx) |
| retval = em28xx_i2c_register(dev, 1, |
| EM28XX_I2C_ALGO_EM25XX_BUS_B); |
| else |
| retval = em28xx_i2c_register(dev, 1, |
| EM28XX_I2C_ALGO_EM28XX); |
| if (retval < 0) { |
| em28xx_errdev("%s: em28xx_i2c_register bus 1 - error [%d]!\n", |
| __func__, retval); |
| goto unregister_dev; |
| } |
| } |
| |
| /* |
| * Default format, used for tvp5150 or saa711x output formats |
| */ |
| dev->vinmode = 0x10; |
| dev->vinctl = EM28XX_VINCTRL_INTERLACED | |
| EM28XX_VINCTRL_CCIR656_ENABLE; |
| |
| /* Do board specific init and eeprom reading */ |
| em28xx_card_setup(dev); |
| |
| /* Configure audio */ |
| retval = em28xx_audio_setup(dev); |
| if (retval < 0) { |
| em28xx_errdev("%s: Error while setting audio - error [%d]!\n", |
| __func__, retval); |
| goto fail; |
| } |
| if (dev->audio_mode.ac97 != EM28XX_NO_AC97) { |
| v4l2_ctrl_new_std(hdl, &em28xx_ctrl_ops, |
| V4L2_CID_AUDIO_MUTE, 0, 1, 1, 1); |
| v4l2_ctrl_new_std(hdl, &em28xx_ctrl_ops, |
| V4L2_CID_AUDIO_VOLUME, 0, 0x1f, 1, 0x1f); |
| } else { |
| /* install the em28xx notify callback */ |
| v4l2_ctrl_notify(v4l2_ctrl_find(hdl, V4L2_CID_AUDIO_MUTE), |
| em28xx_ctrl_notify, dev); |
| v4l2_ctrl_notify(v4l2_ctrl_find(hdl, V4L2_CID_AUDIO_VOLUME), |
| em28xx_ctrl_notify, dev); |
| } |
| |
| /* wake i2c devices */ |
| em28xx_wake_i2c(dev); |
| |
| /* init video dma queues */ |
| INIT_LIST_HEAD(&dev->vidq.active); |
| INIT_LIST_HEAD(&dev->vbiq.active); |
| |
| if (dev->board.has_msp34xx) { |
| /* Send a reset to other chips via gpio */ |
| retval = em28xx_write_reg(dev, EM2820_R08_GPIO_CTRL, 0xf7); |
| if (retval < 0) { |
| em28xx_errdev("%s: em28xx_write_reg - " |
| "msp34xx(1) failed! error [%d]\n", |
| __func__, retval); |
| goto fail; |
| } |
| msleep(3); |
| |
| retval = em28xx_write_reg(dev, EM2820_R08_GPIO_CTRL, 0xff); |
| if (retval < 0) { |
| em28xx_errdev("%s: em28xx_write_reg - " |
| "msp34xx(2) failed! error [%d]\n", |
| __func__, retval); |
| goto fail; |
| } |
| msleep(3); |
| } |
| |
| retval = em28xx_register_analog_devices(dev); |
| if (retval < 0) { |
| goto fail; |
| } |
| |
| /* Save some power by putting tuner to sleep */ |
| v4l2_device_call_all(&dev->v4l2_dev, 0, core, s_power, 0); |
| |
| return 0; |
| |
| fail: |
| if (dev->def_i2c_bus) |
| em28xx_i2c_unregister(dev, 1); |
| em28xx_i2c_unregister(dev, 0); |
| v4l2_ctrl_handler_free(&dev->ctrl_handler); |
| |
| unregister_dev: |
| v4l2_device_unregister(&dev->v4l2_dev); |
| |
| return retval; |
| } |
| |
| /* high bandwidth multiplier, as encoded in highspeed endpoint descriptors */ |
| #define hb_mult(wMaxPacketSize) (1 + (((wMaxPacketSize) >> 11) & 0x03)) |
| |
| /* |
| * em28xx_usb_probe() |
| * checks for supported devices |
| */ |
| static int em28xx_usb_probe(struct usb_interface *interface, |
| const struct usb_device_id *id) |
| { |
| struct usb_device *udev; |
| struct em28xx *dev = NULL; |
| int retval; |
| bool has_audio = false, has_video = false, has_dvb = false; |
| int i, nr, try_bulk; |
| const int ifnum = interface->altsetting[0].desc.bInterfaceNumber; |
| char *speed; |
| |
| udev = usb_get_dev(interface_to_usbdev(interface)); |
| |
| /* Check to see next free device and mark as used */ |
| do { |
| nr = find_first_zero_bit(&em28xx_devused, EM28XX_MAXBOARDS); |
| if (nr >= EM28XX_MAXBOARDS) { |
| /* No free device slots */ |
| printk(DRIVER_NAME ": Supports only %i em28xx boards.\n", |
| EM28XX_MAXBOARDS); |
| retval = -ENOMEM; |
| goto err_no_slot; |
| } |
| } while (test_and_set_bit(nr, &em28xx_devused)); |
| |
| /* Don't register audio interfaces */ |
| if (interface->altsetting[0].desc.bInterfaceClass == USB_CLASS_AUDIO) { |
| em28xx_err(DRIVER_NAME " audio device (%04x:%04x): " |
| "interface %i, class %i\n", |
| le16_to_cpu(udev->descriptor.idVendor), |
| le16_to_cpu(udev->descriptor.idProduct), |
| ifnum, |
| interface->altsetting[0].desc.bInterfaceClass); |
| |
| retval = -ENODEV; |
| goto err; |
| } |
| |
| /* allocate memory for our device state and initialize it */ |
| dev = kzalloc(sizeof(*dev), GFP_KERNEL); |
| if (dev == NULL) { |
| em28xx_err(DRIVER_NAME ": out of memory!\n"); |
| retval = -ENOMEM; |
| goto err; |
| } |
| |
| /* compute alternate max packet sizes */ |
| dev->alt_max_pkt_size_isoc = |
| kmalloc(sizeof(dev->alt_max_pkt_size_isoc[0]) * |
| interface->num_altsetting, GFP_KERNEL); |
| if (dev->alt_max_pkt_size_isoc == NULL) { |
| em28xx_errdev("out of memory!\n"); |
| kfree(dev); |
| retval = -ENOMEM; |
| goto err; |
| } |
| |
| /* Get endpoints */ |
| for (i = 0; i < interface->num_altsetting; i++) { |
| int ep; |
| |
| for (ep = 0; ep < interface->altsetting[i].desc.bNumEndpoints; ep++) { |
| const struct usb_endpoint_descriptor *e; |
| int sizedescr, size; |
| |
| e = &interface->altsetting[i].endpoint[ep].desc; |
| |
| sizedescr = le16_to_cpu(e->wMaxPacketSize); |
| size = sizedescr & 0x7ff; |
| |
| if (udev->speed == USB_SPEED_HIGH) |
| size = size * hb_mult(sizedescr); |
| |
| if (usb_endpoint_dir_in(e)) { |
| switch (e->bEndpointAddress) { |
| case 0x82: |
| has_video = true; |
| if (usb_endpoint_xfer_isoc(e)) { |
| dev->analog_ep_isoc = |
| e->bEndpointAddress; |
| dev->alt_max_pkt_size_isoc[i] = size; |
| } else if (usb_endpoint_xfer_bulk(e)) { |
| dev->analog_ep_bulk = |
| e->bEndpointAddress; |
| } |
| break; |
| case 0x83: |
| if (usb_endpoint_xfer_isoc(e)) { |
| has_audio = true; |
| } else { |
| printk(KERN_INFO DRIVER_NAME |
| ": error: skipping audio endpoint 0x83, because it uses bulk transfers !\n"); |
| } |
| break; |
| case 0x84: |
| if (has_video && |
| (usb_endpoint_xfer_bulk(e))) { |
| dev->analog_ep_bulk = |
| e->bEndpointAddress; |
| } else { |
| if (usb_endpoint_xfer_isoc(e)) { |
| if (size > dev->dvb_max_pkt_size_isoc) { |
| has_dvb = true; /* see NOTE (~) */ |
| dev->dvb_ep_isoc = e->bEndpointAddress; |
| dev->dvb_max_pkt_size_isoc = size; |
| dev->dvb_alt_isoc = i; |
| } |
| } else { |
| has_dvb = true; |
| dev->dvb_ep_bulk = e->bEndpointAddress; |
| } |
| } |
| break; |
| } |
| } |
| /* NOTE: |
| * Old logic with support for isoc transfers only was: |
| * 0x82 isoc => analog |
| * 0x83 isoc => audio |
| * 0x84 isoc => digital |
| * |
| * New logic with support for bulk transfers |
| * 0x82 isoc => analog |
| * 0x82 bulk => analog |
| * 0x83 isoc* => audio |
| * 0x84 isoc => digital |
| * 0x84 bulk => analog or digital** |
| * (*: audio should always be isoc) |
| * (**: analog, if ep 0x82 is isoc, otherwise digital) |
| * |
| * The new logic preserves backwards compatibility and |
| * reflects the endpoint configurations we have seen |
| * so far. But there might be devices for which this |
| * logic is not sufficient... |
| */ |
| /* |
| * NOTE (~): some manufacturers (e.g. Terratec) disable |
| * endpoints by setting wMaxPacketSize to 0 bytes for |
| * all alt settings. So far, we've seen this for |
| * DVB isoc endpoints only. |
| */ |
| } |
| } |
| |
| if (!(has_audio || has_video || has_dvb)) { |
| retval = -ENODEV; |
| goto err_free; |
| } |
| |
| switch (udev->speed) { |
| case USB_SPEED_LOW: |
| speed = "1.5"; |
| break; |
| case USB_SPEED_UNKNOWN: |
| case USB_SPEED_FULL: |
| speed = "12"; |
| break; |
| case USB_SPEED_HIGH: |
| speed = "480"; |
| break; |
| default: |
| speed = "unknown"; |
| } |
| |
| printk(KERN_INFO DRIVER_NAME |
| ": New device %s %s @ %s Mbps " |
| "(%04x:%04x, interface %d, class %d)\n", |
| udev->manufacturer ? udev->manufacturer : "", |
| udev->product ? udev->product : "", |
| speed, |
| le16_to_cpu(udev->descriptor.idVendor), |
| le16_to_cpu(udev->descriptor.idProduct), |
| ifnum, |
| interface->altsetting->desc.bInterfaceNumber); |
| |
| /* |
| * Make sure we have 480 Mbps of bandwidth, otherwise things like |
| * video stream wouldn't likely work, since 12 Mbps is generally |
| * not enough even for most Digital TV streams. |
| */ |
| if (udev->speed != USB_SPEED_HIGH && disable_usb_speed_check == 0) { |
| printk(DRIVER_NAME ": Device initialization failed.\n"); |
| printk(DRIVER_NAME ": Device must be connected to a high-speed" |
| " USB 2.0 port.\n"); |
| retval = -ENODEV; |
| goto err_free; |
| } |
| |
| dev->devno = nr; |
| dev->model = id->driver_info; |
| dev->alt = -1; |
| dev->is_audio_only = has_audio && !(has_video || has_dvb); |
| dev->has_alsa_audio = has_audio; |
| dev->audio_ifnum = ifnum; |
| |
| /* Checks if audio is provided by some interface */ |
| for (i = 0; i < udev->config->desc.bNumInterfaces; i++) { |
| struct usb_interface *uif = udev->config->interface[i]; |
| if (uif->altsetting[0].desc.bInterfaceClass == USB_CLASS_AUDIO) { |
| dev->has_audio_class = 1; |
| break; |
| } |
| } |
| |
| if (has_audio) |
| printk(KERN_INFO DRIVER_NAME |
| ": Audio interface %i found %s\n", |
| ifnum, |
| dev->has_audio_class ? "(USB Audio Class)" : "(Vendor Class)"); |
| if (has_video) |
| printk(KERN_INFO DRIVER_NAME |
| ": Video interface %i found:%s%s\n", |
| ifnum, |
| dev->analog_ep_bulk ? " bulk" : "", |
| dev->analog_ep_isoc ? " isoc" : ""); |
| if (has_dvb) |
| printk(KERN_INFO DRIVER_NAME |
| ": DVB interface %i found:%s%s\n", |
| ifnum, |
| dev->dvb_ep_bulk ? " bulk" : "", |
| dev->dvb_ep_isoc ? " isoc" : ""); |
| |
| dev->num_alt = interface->num_altsetting; |
| |
| if ((unsigned)card[nr] < em28xx_bcount) |
| dev->model = card[nr]; |
| |
| /* save our data pointer in this interface device */ |
| usb_set_intfdata(interface, dev); |
| |
| /* initialize videobuf2 stuff */ |
| em28xx_vb2_setup(dev); |
| |
| /* allocate device struct */ |
| mutex_init(&dev->lock); |
| mutex_lock(&dev->lock); |
| retval = em28xx_init_dev(dev, udev, interface, nr); |
| if (retval) { |
| goto unlock_and_free; |
| } |
| |
| if (usb_xfer_mode < 0) { |
| if (dev->board.is_webcam) |
| try_bulk = 1; |
| else |
| try_bulk = 0; |
| } else { |
| try_bulk = usb_xfer_mode > 0; |
| } |
| |
| /* Select USB transfer types to use */ |
| if (has_video) { |
| if (!dev->analog_ep_isoc || (try_bulk && dev->analog_ep_bulk)) |
| dev->analog_xfer_bulk = 1; |
| em28xx_info("analog set to %s mode.\n", |
| dev->analog_xfer_bulk ? "bulk" : "isoc"); |
| } |
| if (has_dvb) { |
| if (!dev->dvb_ep_isoc || (try_bulk && dev->dvb_ep_bulk)) |
| dev->dvb_xfer_bulk = 1; |
| |
| em28xx_info("dvb set to %s mode.\n", |
| dev->dvb_xfer_bulk ? "bulk" : "isoc"); |
| |
| /* pre-allocate DVB usb transfer buffers */ |
| if (dev->dvb_xfer_bulk) { |
| retval = em28xx_alloc_urbs(dev, EM28XX_DIGITAL_MODE, |
| dev->dvb_xfer_bulk, |
| EM28XX_DVB_NUM_BUFS, |
| 512, |
| EM28XX_DVB_BULK_PACKET_MULTIPLIER); |
| } else { |
| retval = em28xx_alloc_urbs(dev, EM28XX_DIGITAL_MODE, |
| dev->dvb_xfer_bulk, |
| EM28XX_DVB_NUM_BUFS, |
| dev->dvb_max_pkt_size_isoc, |
| EM28XX_DVB_NUM_ISOC_PACKETS); |
| } |
| if (retval) { |
| printk(DRIVER_NAME |
| ": Failed to pre-allocate USB transfer buffers for DVB.\n"); |
| goto unlock_and_free; |
| } |
| } |
| |
| request_modules(dev); |
| |
| /* Should be the last thing to do, to avoid newer udev's to |
| open the device before fully initializing it |
| */ |
| mutex_unlock(&dev->lock); |
| |
| return 0; |
| |
| unlock_and_free: |
| mutex_unlock(&dev->lock); |
| |
| err_free: |
| kfree(dev->alt_max_pkt_size_isoc); |
| kfree(dev); |
| |
| err: |
| clear_bit(nr, &em28xx_devused); |
| |
| err_no_slot: |
| usb_put_dev(udev); |
| return retval; |
| } |
| |
| /* |
| * em28xx_usb_disconnect() |
| * called when the device gets disconnected |
| * video device will be unregistered on v4l2_close in case it is still open |
| */ |
| static void em28xx_usb_disconnect(struct usb_interface *interface) |
| { |
| struct em28xx *dev; |
| |
| dev = usb_get_intfdata(interface); |
| usb_set_intfdata(interface, NULL); |
| |
| if (!dev) |
| return; |
| |
| dev->disconnected = 1; |
| |
| if (dev->is_audio_only) { |
| mutex_lock(&dev->lock); |
| em28xx_close_extension(dev); |
| mutex_unlock(&dev->lock); |
| return; |
| } |
| |
| em28xx_info("disconnecting %s\n", dev->vdev->name); |
| |
| flush_request_modules(dev); |
| |
| mutex_lock(&dev->lock); |
| |
| v4l2_device_disconnect(&dev->v4l2_dev); |
| |
| if (dev->users) { |
| em28xx_warn("device %s is open! Deregistration and memory deallocation are deferred on close.\n", |
| video_device_node_name(dev->vdev)); |
| |
| em28xx_uninit_usb_xfer(dev, EM28XX_ANALOG_MODE); |
| em28xx_uninit_usb_xfer(dev, EM28XX_DIGITAL_MODE); |
| } |
| |
| em28xx_close_extension(dev); |
| /* NOTE: must be called BEFORE the resources are released */ |
| |
| if (!dev->users) |
| em28xx_release_resources(dev); |
| |
| mutex_unlock(&dev->lock); |
| |
| if (!dev->users) { |
| kfree(dev->alt_max_pkt_size_isoc); |
| kfree(dev); |
| } |
| } |
| |
| static struct usb_driver em28xx_usb_driver = { |
| .name = "em28xx", |
| .probe = em28xx_usb_probe, |
| .disconnect = em28xx_usb_disconnect, |
| .id_table = em28xx_id_table, |
| }; |
| |
| module_usb_driver(em28xx_usb_driver); |