Merge master.kernel.org:/home/rmk/linux-2.6-arm

* master.kernel.org:/home/rmk/linux-2.6-arm:
  ARM: Fix wrong register in proc-arm6_7.S data abort handler
  ARM: 5909/1: ARM: Correct the FPSCR bits setting when raising exceptions
  ARM: 5904/1: ARM: Always generate the IT instruction when compiling for Thumb-2
  ARM: 5907/1: ARM: Fix the reset on the RealView PBX Development board
  mx35: add a missing comma in a pad definition
  mx25: make the FEC AHB clk secondary of the IPG
  mx25: fix time accounting
  mx25: properly initialize clocks
  mx25: remove unused mx25_clocks_init() argument
  i.MX25: implement secondary clocks for uarts and fec
  i.MX25: Allow secondary clocks in DEFINE_CLOCK
  ARM: MX3: Fixed typo in declared enum type name.
  MXC: Add AUDMUXv2 register decode to debugfs
  mx31ads: Provide an IRQ range to the WM835x on the 1133-EV1 module
  mx31ads: Provide a name for EXPIO interrupt chip
  mx31ads: Allow enable/disable of switchable supplies
diff --git a/arch/arm/Makefile b/arch/arm/Makefile
index 9e75825..356d702 100644
--- a/arch/arm/Makefile
+++ b/arch/arm/Makefile
@@ -94,7 +94,7 @@
 endif
 
 ifeq ($(CONFIG_THUMB2_KERNEL),y)
-AFLAGS_AUTOIT	:=$(call as-option,-Wa$(comma)-mimplicit-it=thumb,-Wa$(comma)-mauto-it)
+AFLAGS_AUTOIT	:=$(call as-option,-Wa$(comma)-mimplicit-it=always,-Wa$(comma)-mauto-it)
 AFLAGS_NOWARN	:=$(call as-option,-Wa$(comma)-mno-warn-deprecated,-Wa$(comma)-W)
 CFLAGS_THUMB2	:=-mthumb $(AFLAGS_AUTOIT) $(AFLAGS_NOWARN)
 AFLAGS_THUMB2	:=$(CFLAGS_THUMB2) -Wa$(comma)-mthumb
diff --git a/arch/arm/mach-mx25/clock.c b/arch/arm/mach-mx25/clock.c
index 6e838b8..6acc88b 100644
--- a/arch/arm/mach-mx25/clock.c
+++ b/arch/arm/mach-mx25/clock.c
@@ -119,6 +119,11 @@
 	return get_rate_per(8);
 }
 
+static unsigned long get_rate_gpt(struct clk *clk)
+{
+	return get_rate_per(5);
+}
+
 static unsigned long get_rate_otg(struct clk *clk)
 {
 	return 48000000; /* FIXME */
@@ -144,7 +149,7 @@
 	__raw_writel(reg, clk->enable_reg);
 }
 
-#define DEFINE_CLOCK(name, i, er, es, gr, sr)		\
+#define DEFINE_CLOCK(name, i, er, es, gr, sr, s)	\
 	static struct clk name = {			\
 		.id		= i,			\
 		.enable_reg	= CRM_BASE + er,	\
@@ -153,27 +158,30 @@
 		.set_rate	= sr,			\
 		.enable		= clk_cgcr_enable,	\
 		.disable	= clk_cgcr_disable,	\
+		.secondary	= s,			\
 	}
 
-DEFINE_CLOCK(gpt_clk,    0, CCM_CGCR0,  5, get_rate_ipg, NULL);
-DEFINE_CLOCK(cspi1_clk,  0, CCM_CGCR1,  5, get_rate_ipg, NULL);
-DEFINE_CLOCK(cspi2_clk,  0, CCM_CGCR1,  6, get_rate_ipg, NULL);
-DEFINE_CLOCK(cspi3_clk,  0, CCM_CGCR1,  7, get_rate_ipg, NULL);
-DEFINE_CLOCK(uart1_clk,  0, CCM_CGCR2, 14, get_rate_uart, NULL);
-DEFINE_CLOCK(uart2_clk,  0, CCM_CGCR2, 15, get_rate_uart, NULL);
-DEFINE_CLOCK(uart3_clk,  0, CCM_CGCR2, 16, get_rate_uart, NULL);
-DEFINE_CLOCK(uart4_clk,  0, CCM_CGCR2, 17, get_rate_uart, NULL);
-DEFINE_CLOCK(uart5_clk,  0, CCM_CGCR2, 18, get_rate_uart, NULL);
-DEFINE_CLOCK(nfc_clk,    0, CCM_CGCR0,  8, get_rate_nfc, NULL);
-DEFINE_CLOCK(usbotg_clk, 0, CCM_CGCR0, 28, get_rate_otg, NULL);
-DEFINE_CLOCK(pwm1_clk,	 0, CCM_CGCR1, 31, get_rate_ipg, NULL);
-DEFINE_CLOCK(pwm2_clk,	 0, CCM_CGCR2,  0, get_rate_ipg, NULL);
-DEFINE_CLOCK(pwm3_clk,	 0, CCM_CGCR2,  1, get_rate_ipg, NULL);
-DEFINE_CLOCK(pwm4_clk,	 0, CCM_CGCR2,  2, get_rate_ipg, NULL);
-DEFINE_CLOCK(kpp_clk,	 0, CCM_CGCR1, 28, get_rate_ipg, NULL);
-DEFINE_CLOCK(tsc_clk,	 0, CCM_CGCR2, 13, get_rate_ipg, NULL);
-DEFINE_CLOCK(i2c_clk,	 0, CCM_CGCR0,  6, get_rate_i2c, NULL);
-DEFINE_CLOCK(fec_clk,	 0, CCM_CGCR0, 23, get_rate_ipg, NULL);
+DEFINE_CLOCK(gpt_clk,    0, CCM_CGCR0,  5, get_rate_gpt, NULL, NULL);
+DEFINE_CLOCK(uart_per_clk, 0, CCM_CGCR0, 15, get_rate_uart, NULL, NULL);
+DEFINE_CLOCK(cspi1_clk,  0, CCM_CGCR1,  5, get_rate_ipg, NULL, NULL);
+DEFINE_CLOCK(cspi2_clk,  0, CCM_CGCR1,  6, get_rate_ipg, NULL, NULL);
+DEFINE_CLOCK(cspi3_clk,  0, CCM_CGCR1,  7, get_rate_ipg, NULL, NULL);
+DEFINE_CLOCK(fec_ahb_clk, 0, CCM_CGCR0, 23, NULL,	 NULL, NULL);
+DEFINE_CLOCK(uart1_clk,  0, CCM_CGCR2, 14, get_rate_uart, NULL, &uart_per_clk);
+DEFINE_CLOCK(uart2_clk,  0, CCM_CGCR2, 15, get_rate_uart, NULL, &uart_per_clk);
+DEFINE_CLOCK(uart3_clk,  0, CCM_CGCR2, 16, get_rate_uart, NULL, &uart_per_clk);
+DEFINE_CLOCK(uart4_clk,  0, CCM_CGCR2, 17, get_rate_uart, NULL, &uart_per_clk);
+DEFINE_CLOCK(uart5_clk,  0, CCM_CGCR2, 18, get_rate_uart, NULL, &uart_per_clk);
+DEFINE_CLOCK(nfc_clk,    0, CCM_CGCR0,  8, get_rate_nfc, NULL, NULL);
+DEFINE_CLOCK(usbotg_clk, 0, CCM_CGCR0, 28, get_rate_otg, NULL, NULL);
+DEFINE_CLOCK(pwm1_clk,	 0, CCM_CGCR1, 31, get_rate_ipg, NULL, NULL);
+DEFINE_CLOCK(pwm2_clk,	 0, CCM_CGCR2,  0, get_rate_ipg, NULL, NULL);
+DEFINE_CLOCK(pwm3_clk,	 0, CCM_CGCR2,  1, get_rate_ipg, NULL, NULL);
+DEFINE_CLOCK(pwm4_clk,	 0, CCM_CGCR2,  2, get_rate_ipg, NULL, NULL);
+DEFINE_CLOCK(kpp_clk,	 0, CCM_CGCR1, 28, get_rate_ipg, NULL, NULL);
+DEFINE_CLOCK(tsc_clk,	 0, CCM_CGCR2, 13, get_rate_ipg, NULL, NULL);
+DEFINE_CLOCK(i2c_clk,	 0, CCM_CGCR0,  6, get_rate_i2c, NULL, NULL);
+DEFINE_CLOCK(fec_clk,	 0, CCM_CGCR1, 15, get_rate_ipg, NULL, &fec_ahb_clk);
 
 #define _REGISTER_CLOCK(d, n, c)	\
 	{				\
@@ -208,13 +216,21 @@
 	_REGISTER_CLOCK("fec.0", NULL, fec_clk)
 };
 
-int __init mx25_clocks_init(unsigned long fref)
+int __init mx25_clocks_init(void)
 {
 	int i;
 
 	for (i = 0; i < ARRAY_SIZE(lookups); i++)
 		clkdev_add(&lookups[i]);
 
+	/* Turn off all clocks except the ones we need to survive, namely:
+	 * EMI, GPIO1-3 (CCM_CGCR1[18:16]), GPT1, IOMUXC (CCM_CGCR1[27]), IIM,
+	 * SCC
+	 */
+	__raw_writel((1 << 19), CRM_BASE + CCM_CGCR0);
+	__raw_writel((0xf << 16) | (3 << 26), CRM_BASE + CCM_CGCR1);
+	__raw_writel((1 << 5), CRM_BASE + CCM_CGCR2);
+
 	mxc_timer_init(&gpt_clk, MX25_IO_ADDRESS(MX25_GPT1_BASE_ADDR), 54);
 
 	return 0;
diff --git a/arch/arm/mach-mx25/mx25pdk.c b/arch/arm/mach-mx25/mx25pdk.c
index 921bc99..6f06089 100644
--- a/arch/arm/mach-mx25/mx25pdk.c
+++ b/arch/arm/mach-mx25/mx25pdk.c
@@ -91,7 +91,7 @@
 
 static void __init mx25pdk_timer_init(void)
 {
-	mx25_clocks_init(26000000);
+	mx25_clocks_init();
 }
 
 static struct sys_timer mx25pdk_timer = {
diff --git a/arch/arm/mach-mx3/mx31ads.c b/arch/arm/mach-mx3/mx31ads.c
index 3e7bafa..938c549 100644
--- a/arch/arm/mach-mx3/mx31ads.c
+++ b/arch/arm/mach-mx3/mx31ads.c
@@ -173,6 +173,7 @@
 }
 
 static struct irq_chip expio_irq_chip = {
+	.name = "EXPIO(CPLD)",
 	.ack = expio_ack_irq,
 	.mask = expio_mask_irq,
 	.unmask = expio_unmask_irq,
@@ -302,6 +303,7 @@
 		.min_uV = 2800000,
 		.max_uV = 2800000,
 		.valid_modes_mask = REGULATOR_MODE_NORMAL,
+		.valid_ops_mask = REGULATOR_CHANGE_STATUS,
 		.apply_uV = 1,
 	},
 };
@@ -322,6 +324,7 @@
 		.min_uV = 3300000,
 		.max_uV = 3300000,
 		.valid_modes_mask = REGULATOR_MODE_NORMAL,
+		.valid_ops_mask = REGULATOR_CHANGE_STATUS,
 		.apply_uV = 1,
 	},
 	.num_consumer_supplies = ARRAY_SIZE(ldo2_consumers),
@@ -459,6 +462,7 @@
 
 static struct wm8350_platform_data __initdata mx31_wm8350_pdata = {
 	.init = mx31_wm8350_init,
+	.irq_base = MXC_BOARD_IRQ_START + MXC_MAX_EXP_IO_LINES,
 };
 #endif
 
diff --git a/arch/arm/mach-realview/realview_pbx.c b/arch/arm/mach-realview/realview_pbx.c
index a21a4b3..d94857e 100644
--- a/arch/arm/mach-realview/realview_pbx.c
+++ b/arch/arm/mach-realview/realview_pbx.c
@@ -334,8 +334,8 @@
 	 * in the system FPGA
 	 */
 	__raw_writel(REALVIEW_SYS_LOCK_VAL, lock_ctrl);
-	__raw_writel(0x0000, reset_ctrl);
-	__raw_writel(0x0004, reset_ctrl);
+	__raw_writel(0x00F0, reset_ctrl);
+	__raw_writel(0x00F4, reset_ctrl);
 }
 
 static void __init realview_pbx_init(void)
diff --git a/arch/arm/mm/proc-arm6_7.S b/arch/arm/mm/proc-arm6_7.S
index 3f9cd3d..795dc61 100644
--- a/arch/arm/mm/proc-arm6_7.S
+++ b/arch/arm/mm/proc-arm6_7.S
@@ -41,7 +41,7 @@
 ENTRY(cpu_arm7_data_abort)
 	mrc	p15, 0, r1, c5, c0, 0		@ get FSR
 	mrc	p15, 0, r0, c6, c0, 0		@ get FAR
-	ldr	r8, [r0]			@ read arm instruction
+	ldr	r8, [r2]			@ read arm instruction
 	tst	r8, #1 << 20			@ L = 0 -> write?
 	orreq	r1, r1, #1 << 11		@ yes.
 	and	r7, r8, #15 << 24
diff --git a/arch/arm/plat-mxc/audmux-v2.c b/arch/arm/plat-mxc/audmux-v2.c
index 6f21096..b06954a 100644
--- a/arch/arm/plat-mxc/audmux-v2.c
+++ b/arch/arm/plat-mxc/audmux-v2.c
@@ -23,6 +23,7 @@
 #include <linux/err.h>
 #include <linux/io.h>
 #include <linux/clk.h>
+#include <linux/debugfs.h>
 #include <mach/audmux.h>
 #include <mach/hardware.h>
 
@@ -32,6 +33,140 @@
 #define MXC_AUDMUX_V2_PTCR(x)		((x) * 8)
 #define MXC_AUDMUX_V2_PDCR(x)		((x) * 8 + 4)
 
+#ifdef CONFIG_DEBUG_FS
+static struct dentry *audmux_debugfs_root;
+
+static int audmux_open_file(struct inode *inode, struct file *file)
+{
+	file->private_data = inode->i_private;
+	return 0;
+}
+
+/* There is an annoying discontinuity in the SSI numbering with regard
+ * to the Linux number of the devices */
+static const char *audmux_port_string(int port)
+{
+	switch (port) {
+	case MX31_AUDMUX_PORT1_SSI0:
+		return "imx-ssi.0";
+	case MX31_AUDMUX_PORT2_SSI1:
+		return "imx-ssi.1";
+	case MX31_AUDMUX_PORT3_SSI_PINS_3:
+		return "SSI3";
+	case MX31_AUDMUX_PORT4_SSI_PINS_4:
+		return "SSI4";
+	case MX31_AUDMUX_PORT5_SSI_PINS_5:
+		return "SSI5";
+	case MX31_AUDMUX_PORT6_SSI_PINS_6:
+		return "SSI6";
+	default:
+		return "UNKNOWN";
+	}
+}
+
+static ssize_t audmux_read_file(struct file *file, char __user *user_buf,
+				size_t count, loff_t *ppos)
+{
+	ssize_t ret;
+	char *buf = kmalloc(PAGE_SIZE, GFP_KERNEL);
+	int port = (int)file->private_data;
+	u32 pdcr, ptcr;
+
+	if (!buf)
+		return -ENOMEM;
+
+	if (audmux_clk)
+		clk_enable(audmux_clk);
+
+	ptcr = readl(audmux_base + MXC_AUDMUX_V2_PTCR(port));
+	pdcr = readl(audmux_base + MXC_AUDMUX_V2_PDCR(port));
+
+	if (audmux_clk)
+		clk_disable(audmux_clk);
+
+	ret = snprintf(buf, PAGE_SIZE, "PDCR: %08x\nPTCR: %08x\n",
+		       pdcr, ptcr);
+
+	if (ptcr & MXC_AUDMUX_V2_PTCR_TFSDIR)
+		ret += snprintf(buf + ret, PAGE_SIZE - ret,
+				"TxFS output from %s, ",
+				audmux_port_string((ptcr >> 27) & 0x7));
+	else
+		ret += snprintf(buf + ret, PAGE_SIZE - ret,
+				"TxFS input, ");
+
+	if (ptcr & MXC_AUDMUX_V2_PTCR_TCLKDIR)
+		ret += snprintf(buf + ret, PAGE_SIZE - ret,
+				"TxClk output from %s",
+				audmux_port_string((ptcr >> 22) & 0x7));
+	else
+		ret += snprintf(buf + ret, PAGE_SIZE - ret,
+				"TxClk input");
+
+	ret += snprintf(buf + ret, PAGE_SIZE - ret, "\n");
+
+	if (ptcr & MXC_AUDMUX_V2_PTCR_SYN) {
+		ret += snprintf(buf + ret, PAGE_SIZE - ret,
+				"Port is symmetric");
+	} else {
+		if (ptcr & MXC_AUDMUX_V2_PTCR_RFSDIR)
+			ret += snprintf(buf + ret, PAGE_SIZE - ret,
+					"RxFS output from %s, ",
+					audmux_port_string((ptcr >> 17) & 0x7));
+		else
+			ret += snprintf(buf + ret, PAGE_SIZE - ret,
+					"RxFS input, ");
+
+		if (ptcr & MXC_AUDMUX_V2_PTCR_RCLKDIR)
+			ret += snprintf(buf + ret, PAGE_SIZE - ret,
+					"RxClk output from %s",
+					audmux_port_string((ptcr >> 12) & 0x7));
+		else
+			ret += snprintf(buf + ret, PAGE_SIZE - ret,
+					"RxClk input");
+	}
+
+	ret += snprintf(buf + ret, PAGE_SIZE - ret,
+			"\nData received from %s\n",
+			audmux_port_string((pdcr >> 13) & 0x7));
+
+	ret = simple_read_from_buffer(user_buf, count, ppos, buf, ret);
+
+	kfree(buf);
+
+	return ret;
+}
+
+static const struct file_operations audmux_debugfs_fops = {
+	.open = audmux_open_file,
+	.read = audmux_read_file,
+};
+
+static void audmux_debugfs_init(void)
+{
+	int i;
+	char buf[20];
+
+	audmux_debugfs_root = debugfs_create_dir("audmux", NULL);
+	if (!audmux_debugfs_root) {
+		pr_warning("Failed to create AUDMUX debugfs root\n");
+		return;
+	}
+
+	for (i = 1; i < 8; i++) {
+		snprintf(buf, sizeof(buf), "ssi%d", i);
+		if (!debugfs_create_file(buf, 0444, audmux_debugfs_root,
+					 (void *)i, &audmux_debugfs_fops))
+			pr_warning("Failed to create AUDMUX port %d debugfs file\n",
+				   i);
+	}
+}
+#else
+static inline void audmux_debugfs_init(void)
+{
+}
+#endif
+
 int mxc_audmux_v2_configure_port(unsigned int port, unsigned int ptcr,
 		unsigned int pdcr)
 {
@@ -68,6 +203,8 @@
 	if (cpu_is_mx31() || cpu_is_mx35())
 		audmux_base = IO_ADDRESS(AUDMUX_BASE_ADDR);
 
+	audmux_debugfs_init();
+
 	return 0;
 }
 
diff --git a/arch/arm/plat-mxc/include/mach/board-mx31lite.h b/arch/arm/plat-mxc/include/mach/board-mx31lite.h
index 0184b63..2b2da03 100644
--- a/arch/arm/plat-mxc/include/mach/board-mx31lite.h
+++ b/arch/arm/plat-mxc/include/mach/board-mx31lite.h
@@ -25,7 +25,7 @@
 
 #ifndef __ASSEMBLY__
 
-enum mx31lilly_boards {
+enum mx31lite_boards {
 	MX31LITE_NOBOARD	= 0,
 	MX31LITE_DB		= 1,
 };
diff --git a/arch/arm/plat-mxc/include/mach/common.h b/arch/arm/plat-mxc/include/mach/common.h
index 286cb9b..4bf1068 100644
--- a/arch/arm/plat-mxc/include/mach/common.h
+++ b/arch/arm/plat-mxc/include/mach/common.h
@@ -32,7 +32,7 @@
 extern void mxc_timer_init(struct clk *timer_clk, void __iomem *, int);
 extern int mx1_clocks_init(unsigned long fref);
 extern int mx21_clocks_init(unsigned long lref, unsigned long fref);
-extern int mx25_clocks_init(unsigned long fref);
+extern int mx25_clocks_init(void);
 extern int mx27_clocks_init(unsigned long fref);
 extern int mx31_clocks_init(unsigned long fref);
 extern int mx35_clocks_init(void);
diff --git a/arch/arm/plat-mxc/include/mach/iomux-mx35.h b/arch/arm/plat-mxc/include/mach/iomux-mx35.h
index 00b0ac1..c88d407 100644
--- a/arch/arm/plat-mxc/include/mach/iomux-mx35.h
+++ b/arch/arm/plat-mxc/include/mach/iomux-mx35.h
@@ -671,7 +671,7 @@
 #define MX35_PAD_LD8__SDMA_SDMA_DEBUG_PC_8			IOMUX_PAD(0x634, 0x1d0, 6, 0x0,   0, NO_PAD_CTRL)
 
 #define MX35_PAD_LD9__IPU_DISPB_DAT_9				IOMUX_PAD(0x638, 0x1d4, 0, 0x0,   0, NO_PAD_CTRL)
-#define MX35_PAD_LD9__GPIO2_9					IOMUX_PAD(0x638, 0x1d4, 5, 0x8e4  0, NO_PAD_CTRL)
+#define MX35_PAD_LD9__GPIO2_9					IOMUX_PAD(0x638, 0x1d4, 5, 0x8e4, 0, NO_PAD_CTRL)
 #define MX35_PAD_LD9__SDMA_SDMA_DEBUG_PC_9			IOMUX_PAD(0x638, 0x1d4, 6, 0x0,   0, NO_PAD_CTRL)
 
 #define MX35_PAD_LD10__IPU_DISPB_DAT_10				IOMUX_PAD(0x63c, 0x1d8, 0, 0x0,   0, NO_PAD_CTRL)
diff --git a/arch/arm/plat-mxc/include/mach/irqs.h b/arch/arm/plat-mxc/include/mach/irqs.h
index ead9d59..0cb3476 100644
--- a/arch/arm/plat-mxc/include/mach/irqs.h
+++ b/arch/arm/plat-mxc/include/mach/irqs.h
@@ -37,7 +37,12 @@
  * within sensible limits.
  */
 #define MXC_BOARD_IRQ_START	(MXC_INTERNAL_IRQS + MXC_GPIO_IRQS)
+
+#ifdef CONFIG_MACH_MX31ADS_WM1133_EV1
+#define MXC_BOARD_IRQS  80
+#else
 #define MXC_BOARD_IRQS	16
+#endif
 
 #define MXC_IPU_IRQ_START	(MXC_BOARD_IRQ_START + MXC_BOARD_IRQS)
 
diff --git a/arch/arm/vfp/vfpmodule.c b/arch/arm/vfp/vfpmodule.c
index f60a540..a63c4be 100644
--- a/arch/arm/vfp/vfpmodule.c
+++ b/arch/arm/vfp/vfpmodule.c
@@ -197,10 +197,13 @@
 	}
 
 	/*
-	 * Update the FPSCR with the additional exception flags.
+	 * If any of the status flags are set, update the FPSCR.
 	 * Comparison instructions always return at least one of
 	 * these flags set.
 	 */
+	if (exceptions & (FPSCR_N|FPSCR_Z|FPSCR_C|FPSCR_V))
+		fpscr &= ~(FPSCR_N|FPSCR_Z|FPSCR_C|FPSCR_V);
+
 	fpscr |= exceptions;
 
 	fmxr(FPSCR, fpscr);