| /* |
| * konicawc.c - konica webcam driver |
| * |
| * Author: Simon Evans <spse@secret.org.uk> |
| * |
| * Copyright (C) 2002 Simon Evans |
| * |
| * Licence: GPL |
| * |
| * Driver for USB webcams based on Konica chipset. This |
| * chipset is used in Intel YC76 camera. |
| * |
| */ |
| |
| #include <linux/kernel.h> |
| #include <linux/module.h> |
| #include <linux/init.h> |
| #include <linux/input.h> |
| |
| #include "usbvideo.h" |
| |
| #define MAX_BRIGHTNESS 108 |
| #define MAX_CONTRAST 108 |
| #define MAX_SATURATION 108 |
| #define MAX_SHARPNESS 108 |
| #define MAX_WHITEBAL 372 |
| #define MAX_SPEED 6 |
| |
| |
| #define MAX_CAMERAS 1 |
| |
| #define DRIVER_VERSION "v1.4" |
| #define DRIVER_DESC "Konica Webcam driver" |
| |
| enum ctrl_req { |
| SetWhitebal = 0x01, |
| SetBrightness = 0x02, |
| SetSharpness = 0x03, |
| SetContrast = 0x04, |
| SetSaturation = 0x05, |
| }; |
| |
| |
| enum frame_sizes { |
| SIZE_160X120 = 0, |
| SIZE_160X136 = 1, |
| SIZE_176X144 = 2, |
| SIZE_320X240 = 3, |
| |
| }; |
| |
| #define MAX_FRAME_SIZE SIZE_320X240 |
| |
| static struct usbvideo *cams; |
| |
| #ifdef CONFIG_USB_DEBUG |
| static int debug; |
| #define DEBUG(n, format, arg...) \ |
| if (n <= debug) { \ |
| printk(KERN_DEBUG __FILE__ ":%s(): " format "\n", __FUNCTION__ , ## arg); \ |
| } |
| #else |
| #define DEBUG(n, arg...) |
| static const int debug = 0; |
| #endif |
| |
| |
| /* Some default values for initial camera settings, |
| can be set by modprobe */ |
| |
| static int size; |
| static int speed = 6; /* Speed (fps) 0 (slowest) to 6 (fastest) */ |
| static int brightness = MAX_BRIGHTNESS/2; |
| static int contrast = MAX_CONTRAST/2; |
| static int saturation = MAX_SATURATION/2; |
| static int sharpness = MAX_SHARPNESS/2; |
| static int whitebal = 3*(MAX_WHITEBAL/4); |
| |
| static int spd_to_iface[] = { 1, 0, 3, 2, 4, 5, 6 }; |
| |
| /* These FPS speeds are from the windows config box. They are |
| * indexed on size (0-2) and speed (0-6). Divide by 3 to get the |
| * real fps. |
| */ |
| |
| static int spd_to_fps[][7] = { { 24, 40, 48, 60, 72, 80, 100 }, |
| { 24, 40, 48, 60, 72, 80, 100 }, |
| { 18, 30, 36, 45, 54, 60, 75 }, |
| { 6, 10, 12, 15, 18, 21, 25 } }; |
| |
| struct cam_size { |
| u16 width; |
| u16 height; |
| u8 cmd; |
| }; |
| |
| static struct cam_size camera_sizes[] = { { 160, 120, 0x7 }, |
| { 160, 136, 0xa }, |
| { 176, 144, 0x4 }, |
| { 320, 240, 0x5 } }; |
| |
| struct konicawc { |
| u8 brightness; /* camera uses 0 - 9, x11 for real value */ |
| u8 contrast; /* as above */ |
| u8 saturation; /* as above */ |
| u8 sharpness; /* as above */ |
| u8 white_bal; /* 0 - 33, x11 for real value */ |
| u8 speed; /* Stored as 0 - 6, used as index in spd_to_* (above) */ |
| u8 size; /* Frame Size */ |
| int height; |
| int width; |
| struct urb *sts_urb[USBVIDEO_NUMSBUF]; |
| u8 sts_buf[USBVIDEO_NUMSBUF][FRAMES_PER_DESC]; |
| struct urb *last_data_urb; |
| int lastframe; |
| int cur_frame_size; /* number of bytes in current frame size */ |
| int maxline; /* number of lines per frame */ |
| int yplanesz; /* Number of bytes in the Y plane */ |
| unsigned int buttonsts:1; |
| #ifdef CONFIG_INPUT |
| struct input_dev input; |
| char input_physname[64]; |
| #endif |
| }; |
| |
| |
| #define konicawc_set_misc(uvd, req, value, index) konicawc_ctrl_msg(uvd, USB_DIR_OUT, req, value, index, NULL, 0) |
| #define konicawc_get_misc(uvd, req, value, index, buf, sz) konicawc_ctrl_msg(uvd, USB_DIR_IN, req, value, index, buf, sz) |
| #define konicawc_set_value(uvd, value, index) konicawc_ctrl_msg(uvd, USB_DIR_OUT, 2, value, index, NULL, 0) |
| |
| |
| static int konicawc_ctrl_msg(struct uvd *uvd, u8 dir, u8 request, u16 value, u16 index, void *buf, int len) |
| { |
| int retval = usb_control_msg(uvd->dev, |
| dir ? usb_rcvctrlpipe(uvd->dev, 0) : usb_sndctrlpipe(uvd->dev, 0), |
| request, 0x40 | dir, value, index, buf, len, 1000); |
| return retval < 0 ? retval : 0; |
| } |
| |
| |
| static inline void konicawc_camera_on(struct uvd *uvd) |
| { |
| DEBUG(0, "camera on"); |
| konicawc_set_misc(uvd, 0x2, 1, 0x0b); |
| } |
| |
| |
| static inline void konicawc_camera_off(struct uvd *uvd) |
| { |
| DEBUG(0, "camera off"); |
| konicawc_set_misc(uvd, 0x2, 0, 0x0b); |
| } |
| |
| |
| static void konicawc_set_camera_size(struct uvd *uvd) |
| { |
| struct konicawc *cam = (struct konicawc *)uvd->user_data; |
| |
| konicawc_set_misc(uvd, 0x2, camera_sizes[cam->size].cmd, 0x08); |
| cam->width = camera_sizes[cam->size].width; |
| cam->height = camera_sizes[cam->size].height; |
| cam->yplanesz = cam->height * cam->width; |
| cam->cur_frame_size = (cam->yplanesz * 3) / 2; |
| cam->maxline = cam->yplanesz / 256; |
| uvd->videosize = VIDEOSIZE(cam->width, cam->height); |
| } |
| |
| |
| static int konicawc_setup_on_open(struct uvd *uvd) |
| { |
| struct konicawc *cam = (struct konicawc *)uvd->user_data; |
| |
| DEBUG(1, "setting brightness to %d (%d)", cam->brightness, |
| cam->brightness * 11); |
| konicawc_set_value(uvd, cam->brightness, SetBrightness); |
| DEBUG(1, "setting white balance to %d (%d)", cam->white_bal, |
| cam->white_bal * 11); |
| konicawc_set_value(uvd, cam->white_bal, SetWhitebal); |
| DEBUG(1, "setting contrast to %d (%d)", cam->contrast, |
| cam->contrast * 11); |
| konicawc_set_value(uvd, cam->contrast, SetContrast); |
| DEBUG(1, "setting saturation to %d (%d)", cam->saturation, |
| cam->saturation * 11); |
| konicawc_set_value(uvd, cam->saturation, SetSaturation); |
| DEBUG(1, "setting sharpness to %d (%d)", cam->sharpness, |
| cam->sharpness * 11); |
| konicawc_set_value(uvd, cam->sharpness, SetSharpness); |
| konicawc_set_camera_size(uvd); |
| cam->lastframe = -2; |
| cam->buttonsts = 0; |
| return 0; |
| } |
| |
| |
| static void konicawc_adjust_picture(struct uvd *uvd) |
| { |
| struct konicawc *cam = (struct konicawc *)uvd->user_data; |
| |
| konicawc_camera_off(uvd); |
| DEBUG(1, "new brightness: %d", uvd->vpic.brightness); |
| uvd->vpic.brightness = (uvd->vpic.brightness > MAX_BRIGHTNESS) ? MAX_BRIGHTNESS : uvd->vpic.brightness; |
| if(cam->brightness != uvd->vpic.brightness / 11) { |
| cam->brightness = uvd->vpic.brightness / 11; |
| DEBUG(1, "setting brightness to %d (%d)", cam->brightness, |
| cam->brightness * 11); |
| konicawc_set_value(uvd, cam->brightness, SetBrightness); |
| } |
| |
| DEBUG(1, "new contrast: %d", uvd->vpic.contrast); |
| uvd->vpic.contrast = (uvd->vpic.contrast > MAX_CONTRAST) ? MAX_CONTRAST : uvd->vpic.contrast; |
| if(cam->contrast != uvd->vpic.contrast / 11) { |
| cam->contrast = uvd->vpic.contrast / 11; |
| DEBUG(1, "setting contrast to %d (%d)", cam->contrast, |
| cam->contrast * 11); |
| konicawc_set_value(uvd, cam->contrast, SetContrast); |
| } |
| konicawc_camera_on(uvd); |
| } |
| |
| |
| static int konicawc_compress_iso(struct uvd *uvd, struct urb *dataurb, struct urb *stsurb) |
| { |
| char *cdata; |
| int i, totlen = 0; |
| unsigned char *status = stsurb->transfer_buffer; |
| int keep = 0, discard = 0, bad = 0; |
| struct konicawc *cam = (struct konicawc *)uvd->user_data; |
| |
| for (i = 0; i < dataurb->number_of_packets; i++) { |
| int button = cam->buttonsts; |
| unsigned char sts; |
| int n = dataurb->iso_frame_desc[i].actual_length; |
| int st = dataurb->iso_frame_desc[i].status; |
| cdata = dataurb->transfer_buffer + |
| dataurb->iso_frame_desc[i].offset; |
| |
| /* Detect and ignore errored packets */ |
| if (st < 0) { |
| DEBUG(1, "Data error: packet=%d. len=%d. status=%d.", |
| i, n, st); |
| uvd->stats.iso_err_count++; |
| continue; |
| } |
| |
| /* Detect and ignore empty packets */ |
| if (n <= 0) { |
| uvd->stats.iso_skip_count++; |
| continue; |
| } |
| |
| /* See what the status data said about the packet */ |
| sts = *(status+stsurb->iso_frame_desc[i].offset); |
| |
| /* sts: 0x80-0xff: frame start with frame number (ie 0-7f) |
| * otherwise: |
| * bit 0 0: keep packet |
| * 1: drop packet (padding data) |
| * |
| * bit 4 0 button not clicked |
| * 1 button clicked |
| * button is used to `take a picture' (in software) |
| */ |
| |
| if(sts < 0x80) { |
| button = !!(sts & 0x40); |
| sts &= ~0x40; |
| } |
| |
| /* work out the button status, but don't do |
| anything with it for now */ |
| |
| if(button != cam->buttonsts) { |
| DEBUG(2, "button: %sclicked", button ? "" : "un"); |
| cam->buttonsts = button; |
| #ifdef CONFIG_INPUT |
| input_report_key(&cam->input, BTN_0, cam->buttonsts); |
| input_sync(&cam->input); |
| #endif |
| } |
| |
| if(sts == 0x01) { /* drop frame */ |
| discard++; |
| continue; |
| } |
| |
| if((sts > 0x01) && (sts < 0x80)) { |
| info("unknown status %2.2x", sts); |
| bad++; |
| continue; |
| } |
| if(!sts && cam->lastframe == -2) { |
| DEBUG(2, "dropping frame looking for image start"); |
| continue; |
| } |
| |
| keep++; |
| if(sts & 0x80) { /* frame start */ |
| unsigned char marker[] = { 0, 0xff, 0, 0x00 }; |
| |
| if(cam->lastframe == -2) { |
| DEBUG(2, "found initial image"); |
| cam->lastframe = -1; |
| } |
| |
| marker[3] = sts & 0x7F; |
| RingQueue_Enqueue(&uvd->dp, marker, 4); |
| totlen += 4; |
| } |
| |
| totlen += n; /* Little local accounting */ |
| RingQueue_Enqueue(&uvd->dp, cdata, n); |
| } |
| DEBUG(8, "finished: keep = %d discard = %d bad = %d added %d bytes", |
| keep, discard, bad, totlen); |
| return totlen; |
| } |
| |
| |
| static void resubmit_urb(struct uvd *uvd, struct urb *urb) |
| { |
| int i, ret; |
| for (i = 0; i < FRAMES_PER_DESC; i++) { |
| urb->iso_frame_desc[i].status = 0; |
| } |
| urb->dev = uvd->dev; |
| urb->status = 0; |
| ret = usb_submit_urb(urb, GFP_ATOMIC); |
| DEBUG(3, "submitting urb of length %d", urb->transfer_buffer_length); |
| if(ret) |
| err("usb_submit_urb error (%d)", ret); |
| |
| } |
| |
| |
| static void konicawc_isoc_irq(struct urb *urb, struct pt_regs *regs) |
| { |
| struct uvd *uvd = urb->context; |
| struct konicawc *cam = (struct konicawc *)uvd->user_data; |
| |
| /* We don't want to do anything if we are about to be removed! */ |
| if (!CAMERA_IS_OPERATIONAL(uvd)) |
| return; |
| |
| if (!uvd->streaming) { |
| DEBUG(1, "Not streaming, but interrupt!"); |
| return; |
| } |
| |
| DEBUG(3, "got frame %d len = %d buflen =%d", urb->start_frame, urb->actual_length, urb->transfer_buffer_length); |
| |
| uvd->stats.urb_count++; |
| |
| if (urb->transfer_buffer_length > 32) { |
| cam->last_data_urb = urb; |
| return; |
| } |
| /* Copy the data received into ring queue */ |
| if(cam->last_data_urb) { |
| int len = 0; |
| if(urb->start_frame != cam->last_data_urb->start_frame) |
| err("Lost sync on frames"); |
| else if (!urb->status && !cam->last_data_urb->status) |
| len = konicawc_compress_iso(uvd, cam->last_data_urb, urb); |
| |
| resubmit_urb(uvd, cam->last_data_urb); |
| resubmit_urb(uvd, urb); |
| cam->last_data_urb = NULL; |
| uvd->stats.urb_length = len; |
| uvd->stats.data_count += len; |
| if(len) |
| RingQueue_WakeUpInterruptible(&uvd->dp); |
| return; |
| } |
| return; |
| } |
| |
| |
| static int konicawc_start_data(struct uvd *uvd) |
| { |
| struct usb_device *dev = uvd->dev; |
| int i, errFlag; |
| struct konicawc *cam = (struct konicawc *)uvd->user_data; |
| int pktsz; |
| struct usb_interface *intf; |
| struct usb_host_interface *interface = NULL; |
| |
| intf = usb_ifnum_to_if(dev, uvd->iface); |
| if (intf) |
| interface = usb_altnum_to_altsetting(intf, |
| spd_to_iface[cam->speed]); |
| if (!interface) |
| return -ENXIO; |
| pktsz = le16_to_cpu(interface->endpoint[1].desc.wMaxPacketSize); |
| DEBUG(1, "pktsz = %d", pktsz); |
| if (!CAMERA_IS_OPERATIONAL(uvd)) { |
| err("Camera is not operational"); |
| return -EFAULT; |
| } |
| uvd->curframe = -1; |
| konicawc_camera_on(uvd); |
| /* Alternate interface 1 is is the biggest frame size */ |
| i = usb_set_interface(dev, uvd->iface, uvd->ifaceAltActive); |
| if (i < 0) { |
| err("usb_set_interface error"); |
| uvd->last_error = i; |
| return -EBUSY; |
| } |
| |
| /* We double buffer the Iso lists */ |
| for (i=0; i < USBVIDEO_NUMSBUF; i++) { |
| int j, k; |
| struct urb *urb = uvd->sbuf[i].urb; |
| urb->dev = dev; |
| urb->context = uvd; |
| urb->pipe = usb_rcvisocpipe(dev, uvd->video_endp); |
| urb->interval = 1; |
| urb->transfer_flags = URB_ISO_ASAP; |
| urb->transfer_buffer = uvd->sbuf[i].data; |
| urb->complete = konicawc_isoc_irq; |
| urb->number_of_packets = FRAMES_PER_DESC; |
| urb->transfer_buffer_length = pktsz * FRAMES_PER_DESC; |
| for (j=k=0; j < FRAMES_PER_DESC; j++, k += pktsz) { |
| urb->iso_frame_desc[j].offset = k; |
| urb->iso_frame_desc[j].length = pktsz; |
| } |
| |
| urb = cam->sts_urb[i]; |
| urb->dev = dev; |
| urb->context = uvd; |
| urb->pipe = usb_rcvisocpipe(dev, uvd->video_endp-1); |
| urb->interval = 1; |
| urb->transfer_flags = URB_ISO_ASAP; |
| urb->transfer_buffer = cam->sts_buf[i]; |
| urb->complete = konicawc_isoc_irq; |
| urb->number_of_packets = FRAMES_PER_DESC; |
| urb->transfer_buffer_length = FRAMES_PER_DESC; |
| for (j=0; j < FRAMES_PER_DESC; j++) { |
| urb->iso_frame_desc[j].offset = j; |
| urb->iso_frame_desc[j].length = 1; |
| } |
| } |
| |
| cam->last_data_urb = NULL; |
| |
| /* Submit all URBs */ |
| for (i=0; i < USBVIDEO_NUMSBUF; i++) { |
| errFlag = usb_submit_urb(cam->sts_urb[i], GFP_KERNEL); |
| if (errFlag) |
| err("usb_submit_isoc(%d) ret %d", i, errFlag); |
| |
| errFlag = usb_submit_urb(uvd->sbuf[i].urb, GFP_KERNEL); |
| if (errFlag) |
| err ("usb_submit_isoc(%d) ret %d", i, errFlag); |
| } |
| |
| uvd->streaming = 1; |
| DEBUG(1, "streaming=1 video_endp=$%02x", uvd->video_endp); |
| return 0; |
| } |
| |
| |
| static void konicawc_stop_data(struct uvd *uvd) |
| { |
| int i, j; |
| struct konicawc *cam; |
| |
| if ((uvd == NULL) || (!uvd->streaming) || (uvd->dev == NULL)) |
| return; |
| |
| konicawc_camera_off(uvd); |
| uvd->streaming = 0; |
| cam = (struct konicawc *)uvd->user_data; |
| cam->last_data_urb = NULL; |
| |
| /* Unschedule all of the iso td's */ |
| for (i=0; i < USBVIDEO_NUMSBUF; i++) { |
| usb_kill_urb(uvd->sbuf[i].urb); |
| usb_kill_urb(cam->sts_urb[i]); |
| } |
| |
| if (!uvd->remove_pending) { |
| /* Set packet size to 0 */ |
| j = usb_set_interface(uvd->dev, uvd->iface, uvd->ifaceAltInactive); |
| if (j < 0) { |
| err("usb_set_interface() error %d.", j); |
| uvd->last_error = j; |
| } |
| } |
| } |
| |
| |
| static void konicawc_process_isoc(struct uvd *uvd, struct usbvideo_frame *frame) |
| { |
| struct konicawc *cam = (struct konicawc *)uvd->user_data; |
| int maxline = cam->maxline; |
| int yplanesz = cam->yplanesz; |
| |
| assert(frame != NULL); |
| |
| DEBUG(5, "maxline = %d yplanesz = %d", maxline, yplanesz); |
| DEBUG(3, "Frame state = %d", frame->scanstate); |
| |
| if(frame->scanstate == ScanState_Scanning) { |
| int drop = 0; |
| int curframe; |
| int fdrops = 0; |
| DEBUG(3, "Searching for marker, queue len = %d", RingQueue_GetLength(&uvd->dp)); |
| while(RingQueue_GetLength(&uvd->dp) >= 4) { |
| if ((RING_QUEUE_PEEK(&uvd->dp, 0) == 0x00) && |
| (RING_QUEUE_PEEK(&uvd->dp, 1) == 0xff) && |
| (RING_QUEUE_PEEK(&uvd->dp, 2) == 0x00) && |
| (RING_QUEUE_PEEK(&uvd->dp, 3) < 0x80)) { |
| curframe = RING_QUEUE_PEEK(&uvd->dp, 3); |
| if(cam->lastframe >= 0) { |
| fdrops = (0x80 + curframe - cam->lastframe) & 0x7F; |
| fdrops--; |
| if(fdrops) { |
| info("Dropped %d frames (%d -> %d)", fdrops, |
| cam->lastframe, curframe); |
| } |
| } |
| cam->lastframe = curframe; |
| frame->curline = 0; |
| frame->scanstate = ScanState_Lines; |
| RING_QUEUE_DEQUEUE_BYTES(&uvd->dp, 4); |
| break; |
| } |
| RING_QUEUE_DEQUEUE_BYTES(&uvd->dp, 1); |
| drop++; |
| } |
| if(drop) |
| DEBUG(2, "dropped %d bytes looking for new frame", drop); |
| } |
| |
| if(frame->scanstate == ScanState_Scanning) |
| return; |
| |
| /* Try to move data from queue into frame buffer |
| * We get data in blocks of 384 bytes made up of: |
| * 256 Y, 64 U, 64 V. |
| * This needs to be written out as a Y plane, a U plane and a V plane. |
| */ |
| |
| while ( frame->curline < maxline && (RingQueue_GetLength(&uvd->dp) >= 384)) { |
| /* Y */ |
| RingQueue_Dequeue(&uvd->dp, frame->data + (frame->curline * 256), 256); |
| /* U */ |
| RingQueue_Dequeue(&uvd->dp, frame->data + yplanesz + (frame->curline * 64), 64); |
| /* V */ |
| RingQueue_Dequeue(&uvd->dp, frame->data + (5 * yplanesz)/4 + (frame->curline * 64), 64); |
| frame->seqRead_Length += 384; |
| frame->curline++; |
| } |
| /* See if we filled the frame */ |
| if (frame->curline == maxline) { |
| DEBUG(5, "got whole frame"); |
| |
| frame->frameState = FrameState_Done_Hold; |
| frame->curline = 0; |
| uvd->curframe = -1; |
| uvd->stats.frame_num++; |
| } |
| } |
| |
| |
| static int konicawc_find_fps(int size, int fps) |
| { |
| int i; |
| |
| fps *= 3; |
| DEBUG(1, "konica_find_fps: size = %d fps = %d", size, fps); |
| if(fps <= spd_to_fps[size][0]) |
| return 0; |
| |
| if(fps >= spd_to_fps[size][MAX_SPEED]) |
| return MAX_SPEED; |
| |
| for(i = 0; i < MAX_SPEED; i++) { |
| if((fps >= spd_to_fps[size][i]) && (fps <= spd_to_fps[size][i+1])) { |
| DEBUG(2, "fps %d between %d and %d", fps, i, i+1); |
| if( (fps - spd_to_fps[size][i]) < (spd_to_fps[size][i+1] - fps)) |
| return i; |
| else |
| return i+1; |
| } |
| } |
| return MAX_SPEED+1; |
| } |
| |
| |
| static int konicawc_set_video_mode(struct uvd *uvd, struct video_window *vw) |
| { |
| struct konicawc *cam = (struct konicawc *)uvd->user_data; |
| int newspeed = cam->speed; |
| int newsize; |
| int x = vw->width; |
| int y = vw->height; |
| int fps = vw->flags; |
| |
| if(x > 0 && y > 0) { |
| DEBUG(2, "trying to find size %d,%d", x, y); |
| for(newsize = 0; newsize <= MAX_FRAME_SIZE; newsize++) { |
| if((camera_sizes[newsize].width == x) && (camera_sizes[newsize].height == y)) |
| break; |
| } |
| } else { |
| newsize = cam->size; |
| } |
| |
| if(newsize > MAX_FRAME_SIZE) { |
| DEBUG(1, "couldn't find size %d,%d", x, y); |
| return -EINVAL; |
| } |
| |
| if(fps > 0) { |
| DEBUG(1, "trying to set fps to %d", fps); |
| newspeed = konicawc_find_fps(newsize, fps); |
| DEBUG(1, "find_fps returned %d (%d)", newspeed, spd_to_fps[newsize][newspeed]); |
| } |
| |
| if(newspeed > MAX_SPEED) |
| return -EINVAL; |
| |
| DEBUG(1, "setting size to %d speed to %d", newsize, newspeed); |
| if((newsize == cam->size) && (newspeed == cam->speed)) { |
| DEBUG(1, "Nothing to do"); |
| return 0; |
| } |
| DEBUG(0, "setting to %dx%d @ %d fps", camera_sizes[newsize].width, |
| camera_sizes[newsize].height, spd_to_fps[newsize][newspeed]/3); |
| |
| konicawc_stop_data(uvd); |
| uvd->ifaceAltActive = spd_to_iface[newspeed]; |
| DEBUG(1, "new interface = %d", uvd->ifaceAltActive); |
| cam->speed = newspeed; |
| |
| if(cam->size != newsize) { |
| cam->size = newsize; |
| konicawc_set_camera_size(uvd); |
| } |
| |
| /* Flush the input queue and clear any current frame in progress */ |
| |
| RingQueue_Flush(&uvd->dp); |
| cam->lastframe = -2; |
| if(uvd->curframe != -1) { |
| uvd->frame[uvd->curframe].curline = 0; |
| uvd->frame[uvd->curframe].seqRead_Length = 0; |
| uvd->frame[uvd->curframe].seqRead_Index = 0; |
| } |
| |
| konicawc_start_data(uvd); |
| return 0; |
| } |
| |
| |
| static int konicawc_calculate_fps(struct uvd *uvd) |
| { |
| struct konicawc *cam = uvd->user_data; |
| return spd_to_fps[cam->size][cam->speed]/3; |
| } |
| |
| |
| static void konicawc_configure_video(struct uvd *uvd) |
| { |
| struct konicawc *cam = (struct konicawc *)uvd->user_data; |
| u8 buf[2]; |
| |
| memset(&uvd->vpic, 0, sizeof(uvd->vpic)); |
| memset(&uvd->vpic_old, 0x55, sizeof(uvd->vpic_old)); |
| |
| RESTRICT_TO_RANGE(brightness, 0, MAX_BRIGHTNESS); |
| RESTRICT_TO_RANGE(contrast, 0, MAX_CONTRAST); |
| RESTRICT_TO_RANGE(saturation, 0, MAX_SATURATION); |
| RESTRICT_TO_RANGE(sharpness, 0, MAX_SHARPNESS); |
| RESTRICT_TO_RANGE(whitebal, 0, MAX_WHITEBAL); |
| |
| cam->brightness = brightness / 11; |
| cam->contrast = contrast / 11; |
| cam->saturation = saturation / 11; |
| cam->sharpness = sharpness / 11; |
| cam->white_bal = whitebal / 11; |
| |
| uvd->vpic.colour = 108; |
| uvd->vpic.hue = 108; |
| uvd->vpic.brightness = brightness; |
| uvd->vpic.contrast = contrast; |
| uvd->vpic.whiteness = whitebal; |
| uvd->vpic.depth = 6; |
| uvd->vpic.palette = VIDEO_PALETTE_YUV420P; |
| |
| memset(&uvd->vcap, 0, sizeof(uvd->vcap)); |
| strcpy(uvd->vcap.name, "Konica Webcam"); |
| uvd->vcap.type = VID_TYPE_CAPTURE; |
| uvd->vcap.channels = 1; |
| uvd->vcap.audios = 0; |
| uvd->vcap.minwidth = camera_sizes[SIZE_160X120].width; |
| uvd->vcap.minheight = camera_sizes[SIZE_160X120].height; |
| uvd->vcap.maxwidth = camera_sizes[SIZE_320X240].width; |
| uvd->vcap.maxheight = camera_sizes[SIZE_320X240].height; |
| |
| memset(&uvd->vchan, 0, sizeof(uvd->vchan)); |
| uvd->vchan.flags = 0 ; |
| uvd->vchan.tuners = 0; |
| uvd->vchan.channel = 0; |
| uvd->vchan.type = VIDEO_TYPE_CAMERA; |
| strcpy(uvd->vchan.name, "Camera"); |
| |
| /* Talk to device */ |
| DEBUG(1, "device init"); |
| if(!konicawc_get_misc(uvd, 0x3, 0, 0x10, buf, 2)) |
| DEBUG(2, "3,10 -> %2.2x %2.2x", buf[0], buf[1]); |
| if(!konicawc_get_misc(uvd, 0x3, 0, 0x10, buf, 2)) |
| DEBUG(2, "3,10 -> %2.2x %2.2x", buf[0], buf[1]); |
| if(konicawc_set_misc(uvd, 0x2, 0, 0xd)) |
| DEBUG(2, "2,0,d failed"); |
| DEBUG(1, "setting initial values"); |
| } |
| |
| |
| static int konicawc_probe(struct usb_interface *intf, const struct usb_device_id *devid) |
| { |
| struct usb_device *dev = interface_to_usbdev(intf); |
| struct uvd *uvd = NULL; |
| int ix, i, nas; |
| int actInterface=-1, inactInterface=-1, maxPS=0; |
| unsigned char video_ep = 0; |
| |
| DEBUG(1, "konicawc_probe(%p)", intf); |
| |
| /* We don't handle multi-config cameras */ |
| if (dev->descriptor.bNumConfigurations != 1) |
| return -ENODEV; |
| |
| info("Konica Webcam (rev. 0x%04x)", le16_to_cpu(dev->descriptor.bcdDevice)); |
| RESTRICT_TO_RANGE(speed, 0, MAX_SPEED); |
| |
| /* Validate found interface: must have one ISO endpoint */ |
| nas = intf->num_altsetting; |
| if (nas != 8) { |
| err("Incorrect number of alternate settings (%d) for this camera!", nas); |
| return -ENODEV; |
| } |
| /* Validate all alternate settings */ |
| for (ix=0; ix < nas; ix++) { |
| const struct usb_host_interface *interface; |
| const struct usb_endpoint_descriptor *endpoint; |
| |
| interface = &intf->altsetting[ix]; |
| i = interface->desc.bAlternateSetting; |
| if (interface->desc.bNumEndpoints != 2) { |
| err("Interface %d. has %u. endpoints!", |
| interface->desc.bInterfaceNumber, |
| (unsigned)(interface->desc.bNumEndpoints)); |
| return -ENODEV; |
| } |
| endpoint = &interface->endpoint[1].desc; |
| DEBUG(1, "found endpoint: addr: 0x%2.2x maxps = 0x%4.4x", |
| endpoint->bEndpointAddress, le16_to_cpu(endpoint->wMaxPacketSize)); |
| if (video_ep == 0) |
| video_ep = endpoint->bEndpointAddress; |
| else if (video_ep != endpoint->bEndpointAddress) { |
| err("Alternate settings have different endpoint addresses!"); |
| return -ENODEV; |
| } |
| if ((endpoint->bmAttributes & 0x03) != 0x01) { |
| err("Interface %d. has non-ISO endpoint!", |
| interface->desc.bInterfaceNumber); |
| return -ENODEV; |
| } |
| if ((endpoint->bEndpointAddress & 0x80) == 0) { |
| err("Interface %d. has ISO OUT endpoint!", |
| interface->desc.bInterfaceNumber); |
| return -ENODEV; |
| } |
| if (le16_to_cpu(endpoint->wMaxPacketSize) == 0) { |
| if (inactInterface < 0) |
| inactInterface = i; |
| else { |
| err("More than one inactive alt. setting!"); |
| return -ENODEV; |
| } |
| } else { |
| if (i == spd_to_iface[speed]) { |
| /* This one is the requested one */ |
| actInterface = i; |
| } |
| } |
| if (le16_to_cpu(endpoint->wMaxPacketSize) > maxPS) |
| maxPS = le16_to_cpu(endpoint->wMaxPacketSize); |
| } |
| if(actInterface == -1) { |
| err("Cant find required endpoint"); |
| return -ENODEV; |
| } |
| |
| DEBUG(1, "Selecting requested active setting=%d. maxPS=%d.", actInterface, maxPS); |
| |
| uvd = usbvideo_AllocateDevice(cams); |
| if (uvd != NULL) { |
| struct konicawc *cam = (struct konicawc *)(uvd->user_data); |
| /* Here uvd is a fully allocated uvd object */ |
| for(i = 0; i < USBVIDEO_NUMSBUF; i++) { |
| cam->sts_urb[i] = usb_alloc_urb(FRAMES_PER_DESC, GFP_KERNEL); |
| if(cam->sts_urb[i] == NULL) { |
| while(i--) { |
| usb_free_urb(cam->sts_urb[i]); |
| } |
| err("can't allocate urbs"); |
| return -ENOMEM; |
| } |
| } |
| cam->speed = speed; |
| RESTRICT_TO_RANGE(size, SIZE_160X120, SIZE_320X240); |
| cam->width = camera_sizes[size].width; |
| cam->height = camera_sizes[size].height; |
| cam->size = size; |
| |
| uvd->flags = 0; |
| uvd->debug = debug; |
| uvd->dev = dev; |
| uvd->iface = intf->altsetting->desc.bInterfaceNumber; |
| uvd->ifaceAltInactive = inactInterface; |
| uvd->ifaceAltActive = actInterface; |
| uvd->video_endp = video_ep; |
| uvd->iso_packet_len = maxPS; |
| uvd->paletteBits = 1L << VIDEO_PALETTE_YUV420P; |
| uvd->defaultPalette = VIDEO_PALETTE_YUV420P; |
| uvd->canvas = VIDEOSIZE(320, 240); |
| uvd->videosize = VIDEOSIZE(cam->width, cam->height); |
| |
| /* Initialize konicawc specific data */ |
| konicawc_configure_video(uvd); |
| |
| i = usbvideo_RegisterVideoDevice(uvd); |
| uvd->max_frame_size = (320 * 240 * 3)/2; |
| if (i != 0) { |
| err("usbvideo_RegisterVideoDevice() failed."); |
| uvd = NULL; |
| } |
| #ifdef CONFIG_INPUT |
| /* Register input device for button */ |
| memset(&cam->input, 0, sizeof(struct input_dev)); |
| cam->input.name = "Konicawc snapshot button"; |
| cam->input.private = cam; |
| cam->input.evbit[0] = BIT(EV_KEY); |
| cam->input.keybit[LONG(BTN_0)] = BIT(BTN_0); |
| cam->input.id.bustype = BUS_USB; |
| cam->input.id.vendor = le16_to_cpu(dev->descriptor.idVendor); |
| cam->input.id.product = le16_to_cpu(dev->descriptor.idProduct); |
| cam->input.id.version = le16_to_cpu(dev->descriptor.bcdDevice); |
| input_register_device(&cam->input); |
| |
| usb_make_path(dev, cam->input_physname, 56); |
| strcat(cam->input_physname, "/input0"); |
| cam->input.phys = cam->input_physname; |
| info("konicawc: %s on %s\n", cam->input.name, cam->input.phys); |
| #endif |
| } |
| |
| if (uvd) { |
| usb_set_intfdata (intf, uvd); |
| return 0; |
| } |
| return -EIO; |
| } |
| |
| |
| static void konicawc_free_uvd(struct uvd *uvd) |
| { |
| int i; |
| struct konicawc *cam = (struct konicawc *)uvd->user_data; |
| |
| #ifdef CONFIG_INPUT |
| input_unregister_device(&cam->input); |
| #endif |
| for (i=0; i < USBVIDEO_NUMSBUF; i++) { |
| usb_free_urb(cam->sts_urb[i]); |
| cam->sts_urb[i] = NULL; |
| } |
| } |
| |
| |
| static struct usb_device_id id_table[] = { |
| { USB_DEVICE(0x04c8, 0x0720) }, /* Intel YC 76 */ |
| { } /* Terminating entry */ |
| }; |
| |
| |
| static int __init konicawc_init(void) |
| { |
| struct usbvideo_cb cbTbl; |
| info(DRIVER_DESC " " DRIVER_VERSION); |
| memset(&cbTbl, 0, sizeof(cbTbl)); |
| cbTbl.probe = konicawc_probe; |
| cbTbl.setupOnOpen = konicawc_setup_on_open; |
| cbTbl.processData = konicawc_process_isoc; |
| cbTbl.getFPS = konicawc_calculate_fps; |
| cbTbl.setVideoMode = konicawc_set_video_mode; |
| cbTbl.startDataPump = konicawc_start_data; |
| cbTbl.stopDataPump = konicawc_stop_data; |
| cbTbl.adjustPicture = konicawc_adjust_picture; |
| cbTbl.userFree = konicawc_free_uvd; |
| return usbvideo_register( |
| &cams, |
| MAX_CAMERAS, |
| sizeof(struct konicawc), |
| "konicawc", |
| &cbTbl, |
| THIS_MODULE, |
| id_table); |
| } |
| |
| |
| static void __exit konicawc_cleanup(void) |
| { |
| usbvideo_Deregister(&cams); |
| } |
| |
| |
| MODULE_DEVICE_TABLE(usb, id_table); |
| |
| MODULE_LICENSE("GPL"); |
| MODULE_AUTHOR("Simon Evans <spse@secret.org.uk>"); |
| MODULE_DESCRIPTION(DRIVER_DESC); |
| module_param(speed, int, 0); |
| MODULE_PARM_DESC(speed, "Initial speed: 0 (slowest) - 6 (fastest)"); |
| module_param(size, int, 0); |
| MODULE_PARM_DESC(size, "Initial Size 0: 160x120 1: 160x136 2: 176x144 3: 320x240"); |
| module_param(brightness, int, 0); |
| MODULE_PARM_DESC(brightness, "Initial brightness 0 - 108"); |
| module_param(contrast, int, 0); |
| MODULE_PARM_DESC(contrast, "Initial contrast 0 - 108"); |
| module_param(saturation, int, 0); |
| MODULE_PARM_DESC(saturation, "Initial saturation 0 - 108"); |
| module_param(sharpness, int, 0); |
| MODULE_PARM_DESC(sharpness, "Initial brightness 0 - 108"); |
| module_param(whitebal, int, 0); |
| MODULE_PARM_DESC(whitebal, "Initial white balance 0 - 363"); |
| |
| #ifdef CONFIG_USB_DEBUG |
| module_param(debug, int, S_IRUGO | S_IWUSR); |
| MODULE_PARM_DESC(debug, "Debug level: 0-9 (default=0)"); |
| #endif |
| |
| module_init(konicawc_init); |
| module_exit(konicawc_cleanup); |