| /** |
| * gadget.h - DesignWare USB3 DRD Gadget Header |
| * |
| * Copyright (C) 2010-2011 Texas Instruments Incorporated - http://www.ti.com |
| * |
| * Authors: Felipe Balbi <balbi@ti.com>, |
| * Sebastian Andrzej Siewior <bigeasy@linutronix.de> |
| * |
| * Redistribution and use in source and binary forms, with or without |
| * modification, are permitted provided that the following conditions |
| * are met: |
| * 1. Redistributions of source code must retain the above copyright |
| * notice, this list of conditions, and the following disclaimer, |
| * without modification. |
| * 2. Redistributions in binary form must reproduce the above copyright |
| * notice, this list of conditions and the following disclaimer in the |
| * documentation and/or other materials provided with the distribution. |
| * 3. The names of the above-listed copyright holders may not be used |
| * to endorse or promote products derived from this software without |
| * specific prior written permission. |
| * |
| * ALTERNATIVELY, this software may be distributed under the terms of the |
| * GNU General Public License ("GPL") version 2, as published by the Free |
| * Software Foundation. |
| * |
| * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS |
| * IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, |
| * THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR |
| * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR |
| * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, |
| * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, |
| * PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR |
| * PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF |
| * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING |
| * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS |
| * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. |
| */ |
| |
| #ifndef __DRIVERS_USB_DWC3_GADGET_H |
| #define __DRIVERS_USB_DWC3_GADGET_H |
| |
| #include <linux/list.h> |
| #include <linux/usb/gadget.h> |
| #include "io.h" |
| |
| struct dwc3; |
| #define to_dwc3_ep(ep) (container_of(ep, struct dwc3_ep, endpoint)) |
| #define gadget_to_dwc(g) (container_of(g, struct dwc3, gadget)) |
| |
| /* DEPCFG parameter 1 */ |
| #define DWC3_DEPCFG_INT_NUM(n) ((n) << 0) |
| #define DWC3_DEPCFG_XFER_COMPLETE_EN (1 << 8) |
| #define DWC3_DEPCFG_XFER_IN_PROGRESS_EN (1 << 9) |
| #define DWC3_DEPCFG_XFER_NOT_READY_EN (1 << 10) |
| #define DWC3_DEPCFG_FIFO_ERROR_EN (1 << 11) |
| #define DWC3_DEPCFG_STREAM_EVENT_EN (1 << 13) |
| #define DWC3_DEPCFG_BINTERVAL_M1(n) ((n) << 16) |
| #define DWC3_DEPCFG_STREAM_CAPABLE (1 << 24) |
| #define DWC3_DEPCFG_EP_NUMBER(n) ((n) << 25) |
| #define DWC3_DEPCFG_BULK_BASED (1 << 30) |
| #define DWC3_DEPCFG_FIFO_BASED (1 << 31) |
| |
| /* DEPCFG parameter 0 */ |
| #define DWC3_DEPCFG_EP_TYPE(n) ((n) << 1) |
| #define DWC3_DEPCFG_MAX_PACKET_SIZE(n) ((n) << 3) |
| #define DWC3_DEPCFG_FIFO_NUMBER(n) ((n) << 17) |
| #define DWC3_DEPCFG_BURST_SIZE(n) ((n) << 22) |
| #define DWC3_DEPCFG_DATA_SEQ_NUM(n) ((n) << 26) |
| /* This applies for core versions earlier than 1.94a */ |
| #define DWC3_DEPCFG_IGN_SEQ_NUM (1 << 31) |
| /* These apply for core versions 1.94a and later */ |
| #define DWC3_DEPCFG_ACTION_INIT (0 << 30) |
| #define DWC3_DEPCFG_ACTION_RESTORE (1 << 30) |
| #define DWC3_DEPCFG_ACTION_MODIFY (2 << 30) |
| |
| /* DEPXFERCFG parameter 0 */ |
| #define DWC3_DEPXFERCFG_NUM_XFER_RES(n) ((n) & 0xffff) |
| |
| struct dwc3_gadget_ep_cmd_params { |
| u32 param2; |
| u32 param1; |
| u32 param0; |
| }; |
| |
| /* -------------------------------------------------------------------------- */ |
| |
| #define to_dwc3_request(r) (container_of(r, struct dwc3_request, request)) |
| |
| static inline struct dwc3_request *next_request(struct list_head *list) |
| { |
| if (list_empty(list)) |
| return NULL; |
| |
| return list_first_entry(list, struct dwc3_request, list); |
| } |
| |
| static inline void dwc3_gadget_move_request_queued(struct dwc3_request *req) |
| { |
| struct dwc3_ep *dep = req->dep; |
| |
| req->queued = true; |
| list_move_tail(&req->list, &dep->req_queued); |
| } |
| |
| void dwc3_gadget_giveback(struct dwc3_ep *dep, struct dwc3_request *req, |
| int status); |
| |
| int dwc3_gadget_set_test_mode(struct dwc3 *dwc, int mode); |
| int dwc3_gadget_set_link_state(struct dwc3 *dwc, enum dwc3_link_state state); |
| |
| void dwc3_ep0_interrupt(struct dwc3 *dwc, |
| const struct dwc3_event_depevt *event); |
| void dwc3_ep0_out_start(struct dwc3 *dwc); |
| int dwc3_gadget_ep0_set_halt(struct usb_ep *ep, int value); |
| int dwc3_gadget_ep0_queue(struct usb_ep *ep, struct usb_request *request, |
| gfp_t gfp_flags); |
| int __dwc3_gadget_ep_set_halt(struct dwc3_ep *dep, int value); |
| int dwc3_send_gadget_ep_cmd(struct dwc3 *dwc, unsigned ep, |
| unsigned cmd, struct dwc3_gadget_ep_cmd_params *params); |
| int dwc3_send_gadget_generic_command(struct dwc3 *dwc, int cmd, u32 param); |
| |
| /** |
| * dwc3_gadget_ep_get_transfer_index - Gets transfer index from HW |
| * @dwc: DesignWare USB3 Pointer |
| * @number: DWC endpoint number |
| * |
| * Caller should take care of locking |
| */ |
| static inline u32 dwc3_gadget_ep_get_transfer_index(struct dwc3 *dwc, u8 number) |
| { |
| u32 res_id; |
| |
| res_id = dwc3_readl(dwc->regs, DWC3_DEPCMD(number)); |
| |
| return DWC3_DEPCMD_GET_RSC_IDX(res_id); |
| } |
| |
| /** |
| * dwc3_gadget_event_string - returns event name |
| * @event: the event code |
| */ |
| static inline const char *dwc3_gadget_event_string(u8 event) |
| { |
| switch (event) { |
| case DWC3_DEVICE_EVENT_DISCONNECT: |
| return "Disconnect"; |
| case DWC3_DEVICE_EVENT_RESET: |
| return "Reset"; |
| case DWC3_DEVICE_EVENT_CONNECT_DONE: |
| return "Connection Done"; |
| case DWC3_DEVICE_EVENT_LINK_STATUS_CHANGE: |
| return "Link Status Change"; |
| case DWC3_DEVICE_EVENT_WAKEUP: |
| return "WakeUp"; |
| case DWC3_DEVICE_EVENT_EOPF: |
| return "End-Of-Frame"; |
| case DWC3_DEVICE_EVENT_SOF: |
| return "Start-Of-Frame"; |
| case DWC3_DEVICE_EVENT_ERRATIC_ERROR: |
| return "Erratic Error"; |
| case DWC3_DEVICE_EVENT_CMD_CMPL: |
| return "Command Complete"; |
| case DWC3_DEVICE_EVENT_OVERFLOW: |
| return "Overflow"; |
| } |
| |
| return "UNKNOWN"; |
| } |
| |
| /** |
| * dwc3_ep_event_string - returns event name |
| * @event: then event code |
| */ |
| static inline const char *dwc3_ep_event_string(u8 event) |
| { |
| switch (event) { |
| case DWC3_DEPEVT_XFERCOMPLETE: |
| return "Transfer Complete"; |
| case DWC3_DEPEVT_XFERINPROGRESS: |
| return "Transfer In-Progress"; |
| case DWC3_DEPEVT_XFERNOTREADY: |
| return "Transfer Not Ready"; |
| case DWC3_DEPEVT_RXTXFIFOEVT: |
| return "FIFO"; |
| case DWC3_DEPEVT_STREAMEVT: |
| return "Stream"; |
| case DWC3_DEPEVT_EPCMDCMPLT: |
| return "Endpoint Command Complete"; |
| } |
| |
| return "UNKNOWN"; |
| } |
| |
| #endif /* __DRIVERS_USB_DWC3_GADGET_H */ |