| /* |
| * Copyright (c) 2015-2018, The Linux Foundation. All rights reserved. |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License version 2 and |
| * only version 2 as published by the Free Software Foundation. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| */ |
| |
| #include "skeleton64.dtsi" |
| #include <dt-bindings/regulator/qcom,rpm-smd-regulator.h> |
| #include <dt-bindings/spmi/spmi.h> |
| #include <dt-bindings/interrupt-controller/arm-gic.h> |
| #include <dt-bindings/clock/msm-clocks-8952.h> |
| |
| / { |
| model = "Qualcomm Technologies, Inc. MSM8937"; |
| compatible = "qcom,msm8937"; |
| qcom,msm-id = <294 0x0>; |
| interrupt-parent = <&wakegic>; |
| |
| chosen { |
| bootargs = "sched_enable_hmp=1 kpti=0"; |
| }; |
| |
| firmware: firmware { |
| android { |
| compatible = "android,firmware"; |
| fstab { |
| compatible = "android,fstab"; |
| vendor { |
| compatible = "android,vendor"; |
| dev = "/dev/block/platform/soc/7824900.sdhci/by-name/vendor"; |
| type = "ext4"; |
| mnt_flags = "ro,barrier=1,discard"; |
| fsmgr_flags = "wait"; |
| status = "ok"; |
| }; |
| system { |
| compatible = "android,system"; |
| dev = "/dev/block/platform/soc/7824900.sdhci/by-name/system"; |
| type = "ext4"; |
| mnt_flags = "ro,barrier=1,discard"; |
| fsmgr_flags = "wait"; |
| status = "ok"; |
| }; |
| |
| }; |
| }; |
| }; |
| |
| reserved_memory: reserved-memory { |
| #address-cells = <2>; |
| #size-cells = <2>; |
| ranges; |
| |
| other_ext_mem: other_ext_region@0 { |
| compatible = "removed-dma-pool"; |
| no-map; |
| reg = <0x0 0x85b00000 0x0 0xd00000>; |
| }; |
| |
| modem_mem: modem_region@0 { |
| compatible = "removed-dma-pool"; |
| no-map; |
| reg = <0x0 0x86800000 0x0 0x5000000>; |
| }; |
| |
| adsp_fw_mem: adsp_fw_region@0 { |
| compatible = "removed-dma-pool"; |
| no-map; |
| reg = <0x0 0x8b800000 0x0 0x1100000>; |
| }; |
| |
| wcnss_fw_mem: wcnss_fw_region@0 { |
| compatible = "removed-dma-pool"; |
| no-map; |
| reg = <0x0 0x8c900000 0x0 0x700000>; |
| }; |
| |
| |
| venus_mem: venus_region@0 { |
| compatible = "shared-dma-pool"; |
| reusable; |
| alloc-ranges = <0x0 0x80000000 0x0 0x10000000>; |
| alignment = <0 0x400000>; |
| size = <0 0x0800000>; |
| }; |
| |
| secure_mem: secure_region@0 { |
| compatible = "shared-dma-pool"; |
| reusable; |
| alignment = <0 0x400000>; |
| size = <0 0x7000000>; |
| }; |
| |
| qseecom_mem: qseecom_region@0 { |
| compatible = "shared-dma-pool"; |
| reusable; |
| alignment = <0 0x400000>; |
| size = <0 0x1000000>; |
| }; |
| |
| qseecom_ta_mem: qseecom_ta_region { |
| compatible = "shared-dma-pool"; |
| alloc-ranges = <0 0x00000000 0 0xffffffff>; |
| reusable; |
| alignment = <0 0x400000>; |
| size = <0 0x1000000>; |
| }; |
| |
| adsp_mem: adsp_region@0 { |
| compatible = "shared-dma-pool"; |
| reusable; |
| alignment = <0 0x400000>; |
| size = <0 0x400000>; |
| }; |
| |
| cont_splash_mem: splash_region@83000000 { |
| reg = <0x0 0x90000000 0x0 0x1400000>; |
| }; |
| |
| dump_mem: mem_dump_region { |
| compatible = "shared-dma-pool"; |
| reusable; |
| size = <0 0x2400000>; |
| }; |
| }; |
| |
| aliases { |
| /* smdtty devices */ |
| smd1 = &smdtty_apps_fm; |
| smd2 = &smdtty_apps_riva_bt_acl; |
| smd3 = &smdtty_apps_riva_bt_cmd; |
| smd4 = &smdtty_mbalbridge; |
| smd5 = &smdtty_apps_riva_ant_cmd; |
| smd6 = &smdtty_apps_riva_ant_data; |
| smd7 = &smdtty_data1; |
| smd8 = &smdtty_data4; |
| smd11 = &smdtty_data11; |
| smd21 = &smdtty_data21; |
| smd36 = &smdtty_loopback; |
| i2c2 = &i2c_2; |
| i2c5 = &i2c_5; |
| spi3 = &spi_3; |
| i2c3 = &i2c_3; |
| sdhc1 = &sdhc_1; /* SDC1 eMMC slot */ |
| sdhc2 = &sdhc_2; /* SDC2 for SD card */ |
| }; |
| |
| soc: soc { }; |
| |
| vendor: vendor { |
| #address-cells = <1>; |
| #size-cells = <1>; |
| ranges = <0 0 0 0xffffffff>; |
| compatible = "simple-bus"; |
| }; |
| |
| |
| }; |
| |
| #include "msm8937-pinctrl.dtsi" |
| #include "msm8937-cpu.dtsi" |
| #include "msm8937-ion.dtsi" |
| #include "msm-arm-smmu-8937.dtsi" |
| #include "msm8937-smp2p.dtsi" |
| #include "msm8937-bus.dtsi" |
| #include "msm8937-vidc.dtsi" |
| #include "msm8937-pm.dtsi" |
| #include "msm8937-gpu.dtsi" |
| #include "msm8937-mdss.dtsi" |
| #include "msm8937-mdss-pll.dtsi" |
| |
| &soc { |
| #address-cells = <1>; |
| #size-cells = <1>; |
| ranges = <0 0 0 0xffffffff>; |
| compatible = "simple-bus"; |
| |
| intc: interrupt-controller@b000000 { |
| compatible = "qcom,msm-qgic2"; |
| interrupt-controller; |
| interrupt-parent = <&intc>; |
| #interrupt-cells = <3>; |
| reg = <0x0b000000 0x1000>, |
| <0x0b002000 0x1000>; |
| }; |
| |
| dcc: dcc@b3000 { |
| compatible = "qcom,dcc"; |
| reg = <0xb3000 0x1000>, |
| <0xb4000 0x2000>; |
| reg-names = "dcc-base", "dcc-ram-base"; |
| |
| clocks = <&clock_gcc clk_gcc_dcc_clk>; |
| clock-names = "apb_pclk"; |
| qcom,save-reg; |
| }; |
| |
| wakegic: wake-gic { |
| compatible = "qcom,mpm-gic-msm8937", "qcom,mpm-gic"; |
| interrupts = <GIC_SPI 171 IRQ_TYPE_EDGE_RISING>; |
| reg = <0x601d0 0x1000>, |
| <0xb011008 0x4>; /* MSM_APCS_GCC_BASE 4K */ |
| reg-names = "vmpm", "ipc"; |
| qcom,num-mpm-irqs = <64>; |
| interrupt-controller; |
| interrupt-parent = <&intc>; |
| #interrupt-cells = <3>; |
| }; |
| |
| wakegpio: wake-gpio { |
| compatible = "qcom,mpm-gpio-msm8937", "qcom,mpm-gpio"; |
| interrupt-controller; |
| interrupt-parent = <&intc>; |
| #interrupt-cells = <2>; |
| }; |
| |
| timer { |
| compatible = "arm,armv8-timer"; |
| interrupts = <1 2 0xff08>, |
| <1 3 0xff08>, |
| <1 4 0xff08>, |
| <1 1 0xff08>; |
| clock-frequency = <19200000>; |
| }; |
| |
| timer@b120000 { |
| #address-cells = <1>; |
| #size-cells = <1>; |
| ranges; |
| compatible = "arm,armv7-timer-mem"; |
| reg = <0xb120000 0x1000>; |
| clock-frequency = <19200000>; |
| |
| frame@b121000 { |
| frame-number = <0>; |
| interrupts = <0 8 0x4>, |
| <0 7 0x4>; |
| reg = <0xb121000 0x1000>, |
| <0xb122000 0x1000>; |
| }; |
| |
| frame@b123000 { |
| frame-number = <1>; |
| interrupts = <0 9 0x4>; |
| reg = <0xb123000 0x1000>; |
| status = "disabled"; |
| }; |
| |
| frame@b124000 { |
| frame-number = <2>; |
| interrupts = <0 10 0x4>; |
| reg = <0xb124000 0x1000>; |
| status = "disabled"; |
| }; |
| |
| frame@b125000 { |
| frame-number = <3>; |
| interrupts = <0 11 0x4>; |
| reg = <0xb125000 0x1000>; |
| status = "disabled"; |
| }; |
| |
| frame@b126000 { |
| frame-number = <4>; |
| interrupts = <0 12 0x4>; |
| reg = <0xb126000 0x1000>; |
| status = "disabled"; |
| }; |
| |
| frame@b127000 { |
| frame-number = <5>; |
| interrupts = <0 13 0x4>; |
| reg = <0xb127000 0x1000>; |
| status = "disabled"; |
| }; |
| |
| frame@b128000 { |
| frame-number = <6>; |
| interrupts = <0 14 0x4>; |
| reg = <0xb128000 0x1000>; |
| status = "disabled"; |
| }; |
| }; |
| |
| qcom,rmtfs_sharedmem@00000000 { |
| compatible = "qcom,sharedmem-uio"; |
| reg = <0x00000000 0x00180000>; |
| reg-names = "rmtfs"; |
| qcom,client-id = <0x00000001>; |
| }; |
| |
| restart@4ab000 { |
| compatible = "qcom,pshold"; |
| reg = <0x4ab000 0x4>, |
| <0x193d100 0x4>; |
| reg-names = "pshold-base", "tcsr-boot-misc-detect"; |
| }; |
| |
| qcom,mpm2-sleep-counter@4a3000 { |
| compatible = "qcom,mpm2-sleep-counter"; |
| reg = <0x4a3000 0x1000>; |
| clock-frequency = <32768>; |
| }; |
| |
| cpu-pmu { |
| compatible = "arm,armv8-pmuv3"; |
| interrupts = <1 7 0xff00>; |
| }; |
| |
| qcom,sps { |
| compatible = "qcom,msm_sps_4k"; |
| qcom,pipe-attr-ee; |
| }; |
| |
| thermal_zones: thermal-zones {}; |
| |
| mem_dump { |
| compatible = "qcom,mem-dump"; |
| memory-region = <&dump_mem>; |
| |
| rpm_sw_dump { |
| qcom,dump-size = <0x28000>; |
| qcom,dump-id = <0xea>; |
| }; |
| |
| pmic_dump { |
| qcom,dump-size = <0x10000>; |
| qcom,dump-id = <0xe4>; |
| }; |
| |
| vsense_dump { |
| qcom,dump-size = <0x1000>; |
| qcom,dump-id = <0xe9>; |
| }; |
| |
| tmc_etf_dump { |
| qcom,dump-size = <0x10000>; |
| qcom,dump-id = <0xf0>; |
| }; |
| |
| tmc_etr_reg_dump { |
| qcom,dump-size = <0x1000>; |
| qcom,dump-id = <0x100>; |
| }; |
| |
| tmc_etf_reg_dump { |
| qcom,dump-size = <0x1000>; |
| qcom,dump-id = <0x101>; |
| }; |
| |
| misc_data_dump { |
| qcom,dump-size = <0x1000>; |
| qcom,dump-id = <0xe8>; |
| }; |
| |
| }; |
| |
| tsens0: tsens@4a8000 { |
| compatible = "qcom,msm8937-tsens"; |
| reg = <0x4a8000 0x1000>, |
| <0x4a9000 0x1000>, |
| <0xa4000 0x1000>; |
| reg-names = "tsens_srot_physical", |
| "tsens_tm_physical", "tsens_eeprom_physical"; |
| interrupts = <0 184 0>; |
| interrupt-names = "tsens-upper-lower"; |
| #thermal-sensor-cells = <1>; |
| }; |
| |
| slim_msm: slim@c140000{ |
| cell-index = <1>; |
| compatible = "qcom,slim-ngd"; |
| reg = <0xc140000 0x2c000>, |
| <0xc104000 0x2a000>; |
| reg-names = "slimbus_physical", "slimbus_bam_physical"; |
| interrupts = <0 163 0>, <0 180 0>; |
| interrupt-names = "slimbus_irq", "slimbus_bam_irq"; |
| qcom,apps-ch-pipes = <0x600000>; |
| qcom,ea-pc = <0x230>; |
| status = "disabled"; |
| }; |
| |
| blsp1_uart2: serial@78b0000 { |
| compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm"; |
| reg = <0x78b0000 0x200>; |
| interrupts = <0 108 0>; |
| clocks = <&clock_gcc clk_gcc_blsp1_uart2_apps_clk>, |
| <&clock_gcc clk_gcc_blsp1_ahb_clk>; |
| clock-names = "core", "iface"; |
| status = "disabled"; |
| }; |
| |
| dma_blsp1: qcom,sps-dma@7884000 { /* BLSP1 */ |
| #dma-cells = <4>; |
| compatible = "qcom,sps-dma"; |
| reg = <0x7884000 0x1f000>; |
| interrupts = <0 238 0>; |
| qcom,summing-threshold = <10>; |
| }; |
| |
| dma_blsp2: qcom,sps-dma@7ac4000 { /* BLSP2 */ |
| #dma-cells = <4>; |
| compatible = "qcom,sps-dma"; |
| reg = <0x7ac4000 0x1f000>; |
| interrupts = <0 239 0>; |
| qcom,summing-threshold = <10>; |
| }; |
| |
| clock_gcc: qcom,gcc@1800000 { |
| #address-cells = <1>; |
| #size-cells = <1>; |
| compatible = "qcom,gcc-8937"; |
| reg = <0x1800000 0x80000>, |
| <0xb016000 0x00040>, |
| <0xb116000 0x00040>, |
| <0x00a6018 0x00004>; |
| reg-names = "cc_base", "apcs_c1_base", |
| "apcs_c0_base", "efuse"; |
| qcom,gfx3d_clk_src-opp-store-vcorner = <&msm_gpu>; |
| vdd_dig-supply = <&pm8937_s2_level>; |
| vdd_sr2_dig-supply = <&pm8937_s2_level_ao>; |
| vdd_sr2_pll-supply = <&pm8937_l7_ao>; |
| vdd_hf_dig-supply = <&pm8937_s2_level_ao>; |
| vdd_hf_pll-supply = <&pm8937_l7_ao>; |
| #clock-cells = <1>; |
| #reset-cells = <1>; |
| ranges; |
| qcom,spm@0 { |
| compatible = "qcom,gcc-spm-8937"; |
| reg = <0x0b111200 0x100>, |
| <0x0b011200 0x100>; |
| reg-names = "spm_c0_base", "spm_c1_base"; |
| }; |
| }; |
| |
| clock_debug: qcom,cc-debug@1874000 { |
| compatible = "qcom,cc-debug-8937"; |
| reg = <0x1874000 0x4>, |
| <0xb11101c 0x8>; |
| reg-names = "cc_base", "meas"; |
| #clock-cells = <1>; |
| }; |
| |
| clock_gcc_mdss: qcom,gcc-mdss@1800000 { |
| compatible = "qcom,gcc-mdss-8937"; |
| clocks = <&mdss_dsi0_pll clk_dsi_pll0_pixel_clk_src>, |
| <&mdss_dsi0_pll clk_dsi_pll0_byte_clk_src>, |
| <&mdss_dsi1_pll clk_dsi_pll1_pixel_clk_src>, |
| <&mdss_dsi1_pll clk_dsi_pll1_byte_clk_src>; |
| clock-names = "pclk0_src", "byte0_src", "pclk1_src", |
| "byte1_src"; |
| #clock-cells = <1>; |
| }; |
| |
| clock_cpu: qcom,cpu-clock-8939@b111050 { |
| compatible = "qcom,cpu-clock-8939"; |
| reg = <0xb011050 0x8>, |
| <0xb111050 0x8>, |
| <0xb1d1050 0x8>, |
| <0x00a412c 0x8>; |
| reg-names = "apcs-c1-rcg-base", "apcs-c0-rcg-base", |
| "apcs-cci-rcg-base", "efuse"; |
| vdd-c0-supply = <&apc_vreg_corner>; |
| vdd-c1-supply = <&apc_vreg_corner>; |
| vdd-cci-supply = <&apc_vreg_corner>; |
| clocks = <&clock_gcc clk_gpll0_ao_clk_src>, |
| <&clock_gcc clk_a53ss_c0_pll>, |
| <&clock_gcc clk_gpll0_ao_clk_src>, |
| <&clock_gcc clk_a53ss_c1_pll>, |
| <&clock_gcc clk_gpll0_ao_clk_src>, |
| <&clock_gcc clk_gpll0_ao_clk_src>; |
| clock-names = "clk-c0-4", "clk-c0-5", |
| "clk-c1-4", "clk-c1-5", |
| "clk-cci-4", "clk-cci-2"; |
| qcom,speed0-bin-v0-c0 = |
| < 0 0>, |
| < 768000000 1>, |
| < 902400000 2>, |
| < 998400000 4>, |
| < 1094400000 6>; |
| |
| qcom,speed0-bin-v0-c1 = |
| < 0 0>, |
| < 960000000 1>, |
| < 1094400000 2>, |
| < 1248000000 4>, |
| < 1344000000 5>, |
| < 1401000000 6>; |
| |
| qcom,speed0-bin-v0-cci = |
| < 0 0>, |
| < 400000000 1>, |
| < 533333333 3>; |
| |
| qcom,speed1-bin-v0-c0 = |
| < 0 0>, |
| < 768000000 1>, |
| < 902400000 2>, |
| < 998400000 4>, |
| < 1094400000 6>, |
| < 1209600000 7>; |
| |
| qcom,speed1-bin-v0-c1 = |
| < 0 0>, |
| < 960000000 1>, |
| < 1094400000 2>, |
| < 1248000000 4>, |
| < 1344000000 5>, |
| < 1401000000 6>, |
| < 1497600000 7>; |
| |
| qcom,speed1-bin-v0-cci = |
| < 0 0>, |
| < 400000000 1>, |
| < 533333333 3>; |
| |
| qcom,speed2-bin-v0-c0 = |
| < 0 0>, |
| < 768000000 1>, |
| < 902400000 2>, |
| < 998400000 3>; |
| |
| qcom,speed2-bin-v0-c1 = |
| < 0 0>, |
| < 960000000 1>, |
| < 1094400000 2>, |
| < 1209600000 3>; |
| |
| qcom,speed2-bin-v0-cci = |
| < 0 0>, |
| < 400000000 1>, |
| < 533333333 3>; |
| #clock-cells = <1>; |
| }; |
| |
| i2c_2: i2c@78b6000 { /* BLSP1 QUP2 */ |
| compatible = "qcom,i2c-msm-v2"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| reg-names = "qup_phys_addr"; |
| reg = <0x78b6000 0x600>; |
| interrupt-names = "qup_irq"; |
| interrupts = <0 96 0>; |
| qcom,clk-freq-out = <400000>; |
| qcom,clk-freq-in = <19200000>; |
| clock-names = "iface_clk", "core_clk"; |
| clocks = <&clock_gcc clk_gcc_blsp1_ahb_clk>, |
| <&clock_gcc clk_gcc_blsp1_qup2_i2c_apps_clk>; |
| |
| pinctrl-names = "i2c_active", "i2c_sleep"; |
| pinctrl-0 = <&i2c_2_active>; |
| pinctrl-1 = <&i2c_2_sleep>; |
| qcom,noise-rjct-scl = <0>; |
| qcom,noise-rjct-sda = <0>; |
| qcom,master-id = <86>; |
| dmas = <&dma_blsp1 6 64 0x20000020 0x20>, |
| <&dma_blsp1 7 32 0x20000020 0x20>; |
| dma-names = "tx", "rx"; |
| status = "disabled"; |
| }; |
| |
| i2c_3: i2c@78b7000 { /* BLSP1 QUP3 */ |
| compatible = "qcom,i2c-msm-v2"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| reg-names = "qup_phys_addr"; |
| reg = <0x78b7000 0x600>; |
| interrupt-names = "qup_irq"; |
| interrupts = <0 97 0>; |
| qcom,clk-freq-out = <400000>; |
| qcom,clk-freq-in = <19200000>; |
| clock-names = "iface_clk", "core_clk"; |
| clocks = <&clock_gcc clk_gcc_blsp1_ahb_clk>, |
| <&clock_gcc clk_gcc_blsp1_qup3_i2c_apps_clk>; |
| |
| pinctrl-names = "i2c_active", "i2c_sleep"; |
| pinctrl-0 = <&i2c_3_active>; |
| pinctrl-1 = <&i2c_3_sleep>; |
| qcom,noise-rjct-scl = <0>; |
| qcom,noise-rjct-sda = <0>; |
| qcom,master-id = <86>; |
| dmas = <&dma_blsp1 8 64 0x20000020 0x20>, |
| <&dma_blsp1 9 32 0x20000020 0x20>; |
| dma-names = "tx", "rx"; |
| status = "disabled"; |
| }; |
| |
| i2c_5: i2c@7af5000 { /* BLSP2 QUP1 */ |
| compatible = "qcom,i2c-msm-v2"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| reg-names = "qup_phys_addr"; |
| reg = <0x7af5000 0x600>; |
| interrupt-names = "qup_irq"; |
| interrupts = <0 299 0>; |
| qcom,clk-freq-out = <400000>; |
| qcom,clk-freq-in = <19200000>; |
| clock-names = "iface_clk", "core_clk"; |
| clocks = <&clock_gcc clk_gcc_blsp2_ahb_clk>, |
| <&clock_gcc clk_gcc_blsp2_qup1_i2c_apps_clk>; |
| |
| pinctrl-names = "i2c_active", "i2c_sleep"; |
| pinctrl-0 = <&i2c_5_active>; |
| pinctrl-1 = <&i2c_5_sleep>; |
| qcom,noise-rjct-scl = <0>; |
| qcom,noise-rjct-sda = <0>; |
| qcom,master-id = <84>; |
| dmas = <&dma_blsp2 4 64 0x20000020 0x20>, |
| <&dma_blsp2 5 32 0x20000020 0x20>; |
| dma-names = "tx", "rx"; |
| status = "disabled"; |
| }; |
| |
| spi_3: spi@78b7000 { /* BLSP1 QUP3 */ |
| compatible = "qcom,spi-qup-v2"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| reg-names = "spi_physical", "spi_bam_physical"; |
| reg = <0x78b7000 0x600>, |
| <0x7884000 0x1f000>; |
| interrupt-names = "spi_irq", "spi_bam_irq"; |
| interrupts = <0 97 0>, <0 238 0>; |
| spi-max-frequency = <19200000>; |
| pinctrl-names = "spi_default", "spi_sleep"; |
| pinctrl-0 = <&spi3_default &spi3_cs0_active>; |
| pinctrl-1 = <&spi3_sleep &spi3_cs0_sleep>; |
| clocks = <&clock_gcc clk_gcc_blsp1_ahb_clk>, |
| <&clock_gcc clk_gcc_blsp1_qup3_spi_apps_clk>; |
| clock-names = "iface_clk", "core_clk"; |
| qcom,infinite-mode = <0>; |
| qcom,use-bam; |
| qcom,use-pinctrl; |
| qcom,ver-reg-exists; |
| qcom,bam-consumer-pipe-index = <8>; |
| qcom,bam-producer-pipe-index = <9>; |
| qcom,master-id = <86>; |
| status = "disabled"; |
| }; |
| |
| msm_cpufreq: qcom,msm-cpufreq { |
| compatible = "qcom,msm-cpufreq"; |
| clock-names = "l2_clk", "cpu0_clk", "cpu1_clk", "cpu2_clk", |
| "cpu3_clk", "cpu4_clk", "cpu5_clk", |
| "cpu6_clk", "cpu7_clk"; |
| clocks = <&clock_cpu clk_cci_clk>, |
| <&clock_cpu clk_a53_bc_clk>, |
| <&clock_cpu clk_a53_bc_clk>, |
| <&clock_cpu clk_a53_bc_clk>, |
| <&clock_cpu clk_a53_bc_clk>, |
| <&clock_cpu clk_a53_lc_clk>, |
| <&clock_cpu clk_a53_lc_clk>, |
| <&clock_cpu clk_a53_lc_clk>, |
| <&clock_cpu clk_a53_lc_clk>; |
| |
| qcom,governor-per-policy; |
| |
| qcom,cpufreq-table-0 = |
| < 960000 >, |
| < 1094400 >, |
| < 1209600 >, |
| < 1248000 >, |
| < 1344000 >, |
| < 1401000 >, |
| < 1497600 >; |
| |
| qcom,cpufreq-table-4 = |
| < 768000 >, |
| < 902400 >, |
| < 998400 >, |
| < 1094400 >, |
| < 1209600 >; |
| }; |
| |
| cci_cache: qcom,cci { |
| compatible = "devfreq-simple-dev"; |
| clock-names = "devfreq_clk"; |
| clocks = <&clock_cpu clk_cci_clk>; |
| governor = "cpufreq"; |
| freq-tbl-khz = |
| < 400000 >, |
| < 533333 >; |
| }; |
| |
| cpubw: qcom,cpubw { |
| compatible = "qcom,devbw"; |
| governor = "cpufreq"; |
| qcom,src-dst-ports = <1 512>; |
| qcom,active-only; |
| qcom,bw-tbl = |
| < 769 /* 100.8 MHz */ >, |
| < 1611 /* 211.2 MHz */ >, |
| < 2124 /* 278.4 MHz */ >, |
| < 2929 /* 384 MHz */ >, /* SVS */ |
| < 4101 /* 537.6 MHz */ >, |
| < 4248 /* 556.8 MHz */ >, |
| < 5053 /* 662.4 MHz */ >, /* SVS+ */ |
| < 5712 /* 748.8 MHz */ >, /* NOM */ |
| < 6152 /* 806.4 MHz */ >, /* NOM+ */ |
| < 7031 /* 921.6 MHz */ >; /* TURBO */ |
| }; |
| |
| qcom,cpu-bwmon { |
| compatible = "qcom,bimc-bwmon2"; |
| reg = <0x408000 0x300>, <0x401000 0x200>; |
| reg-names = "base", "global_base"; |
| interrupts = <0 183 4>; |
| qcom,mport = <0>; |
| qcom,target-dev = <&cpubw>; |
| }; |
| |
| mincpubw: qcom,mincpubw { |
| compatible = "qcom,devbw"; |
| governor = "cpufreq"; |
| qcom,src-dst-ports = <1 512>; |
| qcom,active-only; |
| qcom,bw-tbl = |
| < 769 /* 100.8 MHz */ >, |
| < 1611 /* 211.2 MHz */ >, |
| < 2124 /* 278.4 MHz */ >, |
| < 2929 /* 384 MHz */ >, /* SVS */ |
| < 4101 /* 537.6 MHz */ >, |
| < 4248 /* 556.8 MHz */ >, |
| < 5053 /* 662.4 MHz */ >, /* SVS+ */ |
| < 5712 /* 748.8 MHz */ >, /* NOM */ |
| < 6152 /* 806.4 MHz */ >, /* NOM+ */ |
| < 7031 /* 921.6 MHz */ >; /* TURBO */ |
| }; |
| |
| devfreq-cpufreq { |
| cpubw-cpufreq { |
| target-dev = <&cpubw>; |
| cpu-to-dev-map-0 = |
| < 998400 2929 >, /* SVS */ |
| < 1094400 5053 >, /* NOM */ |
| < 1248000 5712 >, /* NOM+ */ |
| < 1344000 7031 >, |
| < 1497600 7031 >; /* TURBO */ |
| cpu-to-dev-map-4 = |
| < 806400 2929 >, /* SVS */ |
| < 902400 5053 >, /* NOM */ |
| < 998400 6152 >, /* NOM+ */ |
| < 1209600 7031 >; /* TURBO */ |
| }; |
| |
| cci-cpufreq { |
| target-dev = <&cci_cache>; |
| cpu-to-dev-map-0 = |
| < 998400 400000 >, /* SVS */ |
| < 1094400 400000 >, /* NOM */ |
| < 1248000 533333 >, /* NOM+ */ |
| < 1344000 533333 >, |
| < 1497600 533333 >; /* TURBO */ |
| cpu-to-dev-map-4 = |
| < 806400 400000 >, /* SVS */ |
| < 902400 400000 >, /* NOM */ |
| < 998400 533333 >, /* NOM+ */ |
| < 1209600 533333 >; /* TURBO */ |
| }; |
| |
| mincpubw-cpufreq { |
| target-dev = <&mincpubw>; |
| cpu-to-dev-map-0 = |
| < 1094400 2929 >, |
| < 1497600 4248 >; |
| cpu-to-dev-map-4 = |
| < 998400 2929 >, |
| < 1209600 4248 >; |
| }; |
| }; |
| |
| blsp2_uart1: uart@7aef000 { |
| compatible = "qcom,msm-hsuart-v14"; |
| reg = <0x7aef000 0x200>, |
| <0x7ac4000 0x1f000>; |
| reg-names = "core_mem", "bam_mem"; |
| interrupt-names = "core_irq", "bam_irq", "wakeup_irq"; |
| #address-cells = <0>; |
| interrupt-parent = <&blsp2_uart1>; |
| interrupts = <0 1 2>; |
| #interrupt-cells = <1>; |
| interrupt-map-mask = <0xffffffff>; |
| interrupt-map = <0 &intc 0 306 0 |
| 1 &intc 0 239 0 |
| 2 &tlmm 17 0>; |
| |
| qcom,inject-rx-on-wakeup; |
| qcom,rx-char-to-inject = <0xfd>; |
| |
| qcom,bam-tx-ep-pipe-index = <0>; |
| qcom,bam-rx-ep-pipe-index = <1>; |
| qcom,master-id = <84>; |
| clock-names = "core_clk", "iface_clk"; |
| clocks = <&clock_gcc clk_gcc_blsp2_uart1_apps_clk>, |
| <&clock_gcc clk_gcc_blsp2_ahb_clk>; |
| pinctrl-names = "sleep", "default"; |
| pinctrl-0 = <&blsp2_uart1_sleep>; |
| pinctrl-1 = <&blsp2_uart1_active>; |
| qcom,msm-bus,name = "blsp2_uart1"; |
| qcom,msm-bus,num-cases = <2>; |
| qcom,msm-bus,num-paths = <1>; |
| qcom,msm-bus,vectors-KBps = |
| <84 512 0 0>, |
| <84 512 500 800>; |
| status = "disabled"; |
| }; |
| |
| qcom,ipc-spinlock@1905000 { |
| compatible = "qcom,ipc-spinlock-sfpb"; |
| reg = <0x1905000 0x8000>; |
| qcom,num-locks = <8>; |
| }; |
| |
| qcom,smem@86300000 { |
| compatible = "qcom,smem"; |
| reg = <0x86300000 0x100000>, |
| <0xb011008 0x4>, |
| <0x60000 0x8000>, |
| <0x193d000 0x8>; |
| reg-names = "smem", "irq-reg-base", "aux-mem1", |
| "smem_targ_info_reg"; |
| qcom,mpu-enabled; |
| |
| qcom,smd-modem { |
| compatible = "qcom,smd"; |
| qcom,smd-edge = <0>; |
| qcom,smd-irq-offset = <0x0>; |
| qcom,smd-irq-bitmask = <0x1000>; |
| interrupts = <0 25 1>; |
| label = "modem"; |
| qcom,not-loadable; |
| }; |
| |
| qcom,smsm-modem { |
| compatible = "qcom,smsm"; |
| qcom,smsm-edge = <0>; |
| qcom,smsm-irq-offset = <0x0>; |
| qcom,smsm-irq-bitmask = <0x2000>; |
| interrupts = <0 26 1>; |
| }; |
| |
| qcom,smd-wcnss { |
| compatible = "qcom,smd"; |
| qcom,smd-edge = <6>; |
| qcom,smd-irq-offset = <0x0>; |
| qcom,smd-irq-bitmask = <0x20000>; |
| interrupts = <0 142 1>; |
| label = "wcnss"; |
| }; |
| |
| qcom,smsm-wcnss { |
| compatible = "qcom,smsm"; |
| qcom,smsm-edge = <6>; |
| qcom,smsm-irq-offset = <0x0>; |
| qcom,smsm-irq-bitmask = <0x80000>; |
| interrupts = <0 144 1>; |
| }; |
| |
| qcom,smd-adsp { |
| compatible = "qcom,smd"; |
| qcom,smd-edge = <1>; |
| qcom,smd-irq-offset = <0x0>; |
| qcom,smd-irq-bitmask = <0x100>; |
| interrupts = <0 289 1>; |
| label = "adsp"; |
| }; |
| |
| qcom,smsm-adsp { |
| compatible = "qcom,smsm"; |
| qcom,smsm-edge = <1>; |
| qcom,smsm-irq-offset = <0x0>; |
| qcom,smsm-irq-bitmask = <0x200>; |
| interrupts = <0 290 1>; |
| }; |
| |
| qcom,smd-rpm { |
| compatible = "qcom,smd"; |
| qcom,smd-edge = <15>; |
| qcom,smd-irq-offset = <0x0>; |
| qcom,smd-irq-bitmask = <0x1>; |
| interrupts = <0 168 1>; |
| label = "rpm"; |
| qcom,irq-no-suspend; |
| qcom,not-loadable; |
| }; |
| }; |
| |
| qcom,iris-fm { |
| compatible = "qcom,iris_fm"; |
| }; |
| |
| rpm_bus: qcom,rpm-smd { |
| compatible = "qcom,rpm-smd"; |
| rpm-channel-name = "rpm_requests"; |
| rpm-channel-type = <15>; /* SMD_APPS_RPM */ |
| }; |
| |
| usb_otg: usb@78db000 { |
| compatible = "qcom,hsusb-otg"; |
| reg = <0x78db000 0x400>, <0x6c000 0x200>; |
| reg-names = "core", "phy_csr"; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| ranges; |
| |
| interrupts = <0 134 0>,<0 140 0>; |
| interrupt-names = "core_irq", "async_irq"; |
| |
| hsusb_vdd_dig-supply = <&pm8937_l2>; |
| HSUSB_1p8-supply = <&pm8937_l7>; |
| HSUSB_3p3-supply = <&pm8937_l13>; |
| qcom,vdd-voltage-level = <0 1200000 1200000>; |
| vbus_otg-supply = <&smbcharger_charger_otg>; |
| |
| qcom,hsusb-otg-phy-type = <3>; /* SNPS Femto PHY */ |
| qcom,hsusb-otg-mode = <3>; /* OTG mode */ |
| qcom,hsusb-otg-otg-control = <2>; /* PMIC */ |
| qcom,dp-manual-pullup; |
| qcom,phy-dvdd-always-on; |
| qcom,boost-sysclk-with-streaming; |
| qcom,axi-prefetch-enable; |
| qcom,hsusb-otg-delay-lpm; |
| |
| qcom,msm-bus,name = "usb2"; |
| qcom,msm-bus,num-cases = <3>; |
| qcom,msm-bus,num-paths = <1>; |
| qcom,msm-bus,vectors-KBps = |
| <87 512 0 0>, |
| <87 512 80000 0>, |
| <87 512 6000 6000>; |
| clocks = <&clock_gcc clk_gcc_usb_hs_ahb_clk>, |
| <&clock_gcc clk_gcc_usb_hs_system_clk>, |
| <&clock_gcc clk_gcc_usb2a_phy_sleep_clk>, |
| <&clock_gcc clk_bimc_usb_a_clk>, |
| <&clock_gcc clk_snoc_usb_a_clk>, |
| <&clock_gcc clk_pnoc_usb_a_clk>, |
| <&clock_gcc clk_gcc_qusb2_phy_clk>, |
| <&clock_gcc clk_gcc_usb2_hs_phy_only_clk>, |
| <&clock_gcc clk_gcc_usb_hs_phy_cfg_ahb_clk>, |
| <&clock_gcc clk_xo_otg_clk>; |
| clock-names = "iface_clk", "core_clk", "sleep_clk", |
| "bimc_clk", "snoc_clk", "pcnoc_clk", |
| "phy_reset_clk", "phy_por_clk", "phy_csr_clk", |
| "xo"; |
| qcom,bus-clk-rate = <748800000 200000000 100000000>; |
| qcom,max-nominal-sysclk-rate = <133330000>; |
| |
| resets = <&clock_gcc GCC_USB_HS_BCR>, |
| <&clock_gcc GCC_QUSB2_PHY_BCR>, |
| <&clock_gcc GCC_USB2_HS_PHY_ONLY_BCR>; |
| reset-names = "core_reset", "phy_reset", "phy_por_reset"; |
| |
| qcom,usbbam@78c4000 { |
| compatible = "qcom,usb-bam-msm"; |
| reg = <0x78c4000 0x17000>; |
| interrupt-parent = <&intc>; |
| interrupts = <0 135 0>; |
| |
| qcom,bam-type = <1>; |
| qcom,usb-bam-num-pipes = <4>; |
| qcom,usb-bam-fifo-baseaddr = <0x08605000>; |
| qcom,ignore-core-reset-ack; |
| qcom,disable-clk-gating; |
| qcom,usb-bam-max-mbps-highspeed = <400>; |
| qcom,reset-bam-on-disconnect; |
| |
| qcom,pipe0 { |
| label = "hsusb-qdss-in-0"; |
| qcom,usb-bam-mem-type = <2>; |
| qcom,dir = <1>; |
| qcom,pipe-num = <0>; |
| qcom,peer-bam = <0>; |
| qcom,peer-bam-physical-address = <0x6044000>; |
| qcom,src-bam-pipe-index = <0>; |
| qcom,dst-bam-pipe-index = <0>; |
| qcom,data-fifo-offset = <0x0>; |
| qcom,data-fifo-size = <0xe00>; |
| qcom,descriptor-fifo-offset = <0xe00>; |
| qcom,descriptor-fifo-size = <0x200>; |
| }; |
| }; |
| }; |
| |
| qcom,wdt@b017000 { |
| compatible = "qcom,msm-watchdog"; |
| reg = <0xb017000 0x1000>; |
| reg-names = "wdt-base"; |
| interrupts = <0 3 0>, <0 4 0>; |
| qcom,bark-time = <11000>; |
| qcom,pet-time = <10000>; |
| qcom,ipi-ping; |
| qcom,wakeup-enable; |
| status = "okay"; |
| qcom,scandump-size = <0x40000>; |
| }; |
| |
| spmi_bus: qcom,spmi@200f000 { |
| compatible = "qcom,spmi-pmic-arb"; |
| reg = <0x200f000 0x1000>, |
| <0x2400000 0x800000>, |
| <0x2c00000 0x800000>, |
| <0x3800000 0x200000>, |
| <0x200a000 0x2100>; |
| reg-names = "core", "chnls", "obsrvr", "intr", "cnfg"; |
| interrupt-names = "periph_irq"; |
| interrupts = <GIC_SPI 190 IRQ_TYPE_NONE>; |
| qcom,ee = <0>; |
| qcom,channel = <0>; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| interrupt-controller; |
| #interrupt-cells = <4>; |
| cell-index = <0>; |
| }; |
| |
| qcom,chd { |
| compatible = "qcom,core-hang-detect"; |
| qcom,threshold-arr = <0xb088094 0xb098094 0xb0a8094 |
| 0xb0b8094 0xb188094 0xb198094 0xb1a8094 0xb1a8094>; |
| qcom,config-arr = <0xb08809c 0xb09809c 0xb0a809c |
| 0xb0b809c 0xb18809c 0xb19809c 0xb1a809c 0xb1b809c>; |
| }; |
| |
| qcom,msm-rtb { |
| compatible = "qcom,msm-rtb"; |
| qcom,rtb-size = <0x100000>; /* 1M EBI1 buffer */ |
| }; |
| |
| qcom,msm-imem@8600000 { |
| compatible = "qcom,msm-imem"; |
| reg = <0x08600000 0x1000>; /* Address and size of IMEM */ |
| ranges = <0x0 0x08600000 0x1000>; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| |
| mem_dump_table@10 { |
| compatible = "qcom,msm-imem-mem_dump_table"; |
| reg = <0x10 8>; |
| }; |
| |
| dload_type@18 { |
| compatible = "qcom,msm-imem-dload-type"; |
| reg = <0x18 4>; |
| }; |
| |
| restart_reason@65c { |
| compatible = "qcom,msm-imem-restart_reason"; |
| reg = <0x65c 4>; |
| }; |
| |
| boot_stats@6b0 { |
| compatible = "qcom,msm-imem-boot_stats"; |
| reg = <0x6b0 32>; |
| }; |
| |
| kaslr_offset@6d0 { |
| compatible = "qcom,msm-imem-kaslr_offset"; |
| reg = <0x6d0 12>; |
| }; |
| |
| pil@94c { |
| compatible = "qcom,msm-imem-pil"; |
| reg = <0x94c 200>; |
| }; |
| |
| diag_dload@c8 { |
| compatible = "qcom,msm-imem-diag-dload"; |
| reg = <0xc8 200>; |
| }; |
| }; |
| |
| qcom,memshare { |
| compatible = "qcom,memshare"; |
| |
| qcom,client_1 { |
| compatible = "qcom,memshare-peripheral"; |
| qcom,peripheral-size = <0x200000>; |
| qcom,client-id = <0>; |
| qcom,allocate-boot-time; |
| label = "modem"; |
| }; |
| |
| qcom,client_2 { |
| compatible = "qcom,memshare-peripheral"; |
| qcom,peripheral-size = <0x300000>; |
| qcom,client-id = <2>; |
| label = "modem"; |
| }; |
| |
| qcom,client_3 { |
| compatible = "qcom,memshare-peripheral"; |
| qcom,peripheral-size = <0x500000>; |
| qcom,client-id = <1>; |
| qcom,allocate-boot-time; |
| label = "modem"; |
| }; |
| }; |
| |
| jtag_mm0: jtagmm@61bc000 { |
| compatible = "qcom,jtagv8-mm"; |
| reg = <0x61bc000 0x1000>; |
| reg-names = "etm-base"; |
| |
| qcom,coresight-jtagmm-cpu = <&CPU0>; |
| |
| clocks = <&clock_gcc clk_qdss_clk>; |
| clock-names = "core_clk"; |
| }; |
| |
| jtag_mm1: jtagmm@61bd000 { |
| compatible = "qcom,jtagv8-mm"; |
| reg = <0x61bd000 0x1000>; |
| reg-names = "etm-base"; |
| |
| qcom,coresight-jtagmm-cpu = <&CPU1>; |
| |
| clocks = <&clock_gcc clk_qdss_clk>; |
| clock-names = "core_clk"; |
| }; |
| |
| jtag_mm2: jtagmm@61be000 { |
| compatible = "qcom,jtagv8-mm"; |
| reg = <0x61be000 0x1000>; |
| reg-names = "etm-base"; |
| |
| qcom,coresight-jtagmm-cpu = <&CPU2>; |
| |
| clocks = <&clock_gcc clk_qdss_clk>; |
| clock-names = "core_clk"; |
| }; |
| |
| jtag_mm3: jtagmm@61bf000 { |
| compatible = "qcom,jtagv8-mm"; |
| reg = <0x61bf000 0x1000>; |
| reg-names = "etm-base"; |
| |
| qcom,coresight-jtagmm-cpu = <&CPU3>; |
| |
| clocks = <&clock_gcc clk_qdss_clk>; |
| clock-names = "core_clk"; |
| }; |
| |
| jtag_mm4: jtagmm@619c000 { |
| compatible = "qcom,jtagv8-mm"; |
| reg = <0x619c000 0x1000>; |
| reg-names = "etm-base"; |
| |
| qcom,coresight-jtagmm-cpu = <&CPU4>; |
| |
| clocks = <&clock_gcc clk_qdss_clk>; |
| clock-names = "core_clk"; |
| }; |
| |
| jtag_mm5: jtagmm@619d000 { |
| compatible = "qcom,jtagv8-mm"; |
| reg = <0x619d000 0x1000>; |
| reg-names = "etm-base"; |
| |
| qcom,coresight-jtagmm-cpu = <&CPU5>; |
| |
| clocks = <&clock_gcc clk_qdss_clk>; |
| clock-names = "core_clk"; |
| }; |
| |
| jtag_mm6: jtagmm@619e000 { |
| compatible = "qcom,jtagv8-mm"; |
| reg = <0x619e000 0x1000>; |
| reg-names = "etm-base"; |
| |
| qcom,coresight-jtagmm-cpu = <&CPU6>; |
| |
| clocks = <&clock_gcc clk_qdss_clk>; |
| clock-names = "core_clk"; |
| }; |
| |
| jtag_mm7: jtagmm@619f000 { |
| compatible = "qcom,jtagv8-mm"; |
| reg = <0x619f000 0x1000>; |
| reg-names = "etm-base"; |
| |
| qcom,coresight-jtagmm-cpu = <&CPU7>; |
| |
| clocks = <&clock_gcc clk_qdss_clk>; |
| clock-names = "core_clk"; |
| }; |
| |
| qcom,smdtty { |
| compatible = "qcom,smdtty"; |
| |
| smdtty_apps_fm: qcom,smdtty-apps-fm { |
| qcom,smdtty-remote = "wcnss"; |
| qcom,smdtty-port-name = "APPS_FM"; |
| }; |
| |
| smdtty_apps_riva_bt_acl: smdtty-apps-riva-bt-acl { |
| qcom,smdtty-remote = "wcnss"; |
| qcom,smdtty-port-name = "APPS_RIVA_BT_ACL"; |
| }; |
| |
| smdtty_apps_riva_bt_cmd: qcom,smdtty-apps-riva-bt-cmd { |
| qcom,smdtty-remote = "wcnss"; |
| qcom,smdtty-port-name = "APPS_RIVA_BT_CMD"; |
| }; |
| |
| smdtty_mbalbridge: qcom,smdtty-mbalbridge { |
| qcom,smdtty-remote = "modem"; |
| qcom,smdtty-port-name = "MBALBRIDGE"; |
| }; |
| |
| smdtty_apps_riva_ant_cmd: smdtty-apps-riva-ant-cmd { |
| qcom,smdtty-remote = "wcnss"; |
| qcom,smdtty-port-name = "APPS_RIVA_ANT_CMD"; |
| }; |
| |
| smdtty_apps_riva_ant_data: smdtty-apps-riva-ant-data { |
| qcom,smdtty-remote = "wcnss"; |
| qcom,smdtty-port-name = "APPS_RIVA_ANT_DATA"; |
| }; |
| |
| smdtty_data1: qcom,smdtty-data1 { |
| qcom,smdtty-remote = "modem"; |
| qcom,smdtty-port-name = "DATA1"; |
| }; |
| |
| smdtty_data4: qcom,smdtty-data4 { |
| qcom,smdtty-remote = "modem"; |
| qcom,smdtty-port-name = "DATA4"; |
| }; |
| |
| smdtty_data11: qcom,smdtty-data11 { |
| qcom,smdtty-remote = "modem"; |
| qcom,smdtty-port-name = "DATA11"; |
| }; |
| |
| smdtty_data21: qcom,smdtty-data21 { |
| qcom,smdtty-remote = "modem"; |
| qcom,smdtty-port-name = "DATA21"; |
| }; |
| |
| smdtty_loopback: smdtty-loopback { |
| qcom,smdtty-remote = "modem"; |
| qcom,smdtty-port-name = "LOOPBACK"; |
| qcom,smdtty-dev-name = "LOOPBACK_TTY"; |
| }; |
| }; |
| |
| qcom,smdpkt { |
| compatible = "qcom,smdpkt"; |
| |
| qcom,smdpkt-data5-cntl { |
| qcom,smdpkt-remote = "modem"; |
| qcom,smdpkt-port-name = "DATA5_CNTL"; |
| qcom,smdpkt-dev-name = "smdcntl0"; |
| }; |
| |
| qcom,smdpkt-data22 { |
| qcom,smdpkt-remote = "modem"; |
| qcom,smdpkt-port-name = "DATA22"; |
| qcom,smdpkt-dev-name = "smd22"; |
| }; |
| |
| qcom,smdpkt-data40-cntl { |
| qcom,smdpkt-remote = "modem"; |
| qcom,smdpkt-port-name = "DATA40_CNTL"; |
| qcom,smdpkt-dev-name = "smdcntl8"; |
| }; |
| |
| qcom,smdpkt-data2 { |
| qcom,smdpkt-remote = "modem"; |
| qcom,smdpkt-port-name = "DATA2"; |
| qcom,smdpkt-dev-name = "at_mdm0"; |
| }; |
| |
| qcom,smdpkt-apr-apps2 { |
| qcom,smdpkt-remote = "adsp"; |
| qcom,smdpkt-port-name = "apr_apps2"; |
| qcom,smdpkt-dev-name = "apr_apps2"; |
| }; |
| |
| qcom,smdpkt-loopback { |
| qcom,smdpkt-remote = "modem"; |
| qcom,smdpkt-port-name = "LOOPBACK"; |
| qcom,smdpkt-dev-name = "smd_pkt_loopback"; |
| }; |
| }; |
| |
| qcom_tzlog: tz-log@08600720 { |
| compatible = "qcom,tz-log"; |
| reg = <0x08600720 0x2000>; |
| }; |
| |
| qcom,ipc_router { |
| compatible = "qcom,ipc_router"; |
| qcom,node-id = <1>; |
| }; |
| |
| qcom,ipc_router_modem_xprt { |
| compatible = "qcom,ipc_router_smd_xprt"; |
| qcom,ch-name = "IPCRTR"; |
| qcom,xprt-remote = "modem"; |
| qcom,xprt-linkid = <1>; |
| qcom,xprt-version = <1>; |
| qcom,fragmented-data; |
| qcom,disable-pil-loading; |
| }; |
| |
| qcom,ipc_router_q6_xprt { |
| compatible = "qcom,ipc_router_smd_xprt"; |
| qcom,ch-name = "IPCRTR"; |
| qcom,xprt-remote = "adsp"; |
| qcom,xprt-linkid = <1>; |
| qcom,xprt-version = <1>; |
| qcom,fragmented-data; |
| }; |
| |
| qcom,ipc_router_wcnss_xprt { |
| compatible = "qcom,ipc_router_smd_xprt"; |
| qcom,ch-name = "IPCRTR"; |
| qcom,xprt-remote = "wcnss"; |
| qcom,xprt-linkid = <1>; |
| qcom,xprt-version = <1>; |
| qcom,fragmented-data; |
| }; |
| |
| qcom,adsprpc-mem { |
| compatible = "qcom,msm-adsprpc-mem-region"; |
| memory-region = <&adsp_mem>; |
| }; |
| qcom,msm_fastrpc { |
| compatible = "qcom,msm-fastrpc-legacy-compute"; |
| qcom,msm_fastrpc_compute_cb { |
| compatible = "qcom,msm-fastrpc-legacy-compute-cb"; |
| label = "adsprpc-smd"; |
| iommus = <&apps_iommu 0x2008 0x7>; |
| sids = <0x8 0x9 0xa 0xb 0xc 0xd 0xe 0xf>; |
| }; |
| }; |
| |
| sdcc1_ice: sdcc1ice@7803000 { |
| compatible = "qcom,ice"; |
| reg = <0x7803000 0x8000>; |
| interrupt-names = "sdcc_ice_nonsec_level_irq", |
| "sdcc_ice_sec_level_irq"; |
| interrupts = <0 312 0>, <0 313 0>; |
| qcom,enable-ice-clk; |
| clock-names = "ice_core_clk_src", "ice_core_clk", |
| "bus_clk", "iface_clk"; |
| clocks = <&clock_gcc clk_sdcc1_ice_core_clk_src>, |
| <&clock_gcc clk_gcc_sdcc1_ice_core_clk>, |
| <&clock_gcc clk_gcc_sdcc1_apps_clk>, |
| <&clock_gcc clk_gcc_sdcc1_ahb_clk>; |
| qcom,op-freq-hz = <200000000>, <0>, <0>, <0>; |
| qcom,msm-bus,name = "sdcc_ice_noc"; |
| qcom,msm-bus,num-cases = <2>; |
| qcom,msm-bus,num-paths = <1>; |
| qcom,msm-bus,vectors-KBps = |
| <78 512 0 0>, /* No vote */ |
| <78 512 1000 0>; /* Max. bandwidth */ |
| qcom,bus-vector-names = "MIN", "MAX"; |
| qcom,instance-type = "sdcc"; |
| }; |
| |
| sdhc_1: sdhci@7824900 { |
| compatible = "qcom,sdhci-msm"; |
| reg = <0x7824900 0x500>, <0x7824000 0x800>, <0x7824e00 0x200>; |
| reg-names = "hc_mem", "core_mem", "cmdq_mem"; |
| |
| interrupts = <0 123 0>, <0 138 0>; |
| interrupt-names = "hc_irq", "pwr_irq"; |
| |
| sdhc-msm-crypto = <&sdcc1_ice>; |
| qcom,bus-width = <8>; |
| qcom,large-address-bus; |
| |
| qcom,devfreq,freq-table = <50000000 200000000>; |
| |
| qcom,pm-qos-irq-type = "affine_irq"; |
| qcom,pm-qos-irq-latency = <2 200>; |
| |
| qcom,pm-qos-cpu-groups = <0x0f 0xf0>; |
| qcom,pm-qos-cmdq-latency-us = <2 200>, <2 200>; |
| |
| qcom,pm-qos-legacy-latency-us = <2 200>, <2 200>; |
| |
| qcom,msm-bus,name = "sdhc1"; |
| qcom,msm-bus,num-cases = <9>; |
| qcom,msm-bus,num-paths = <1>; |
| qcom,msm-bus,vectors-KBps = <78 512 0 0>, /* No vote */ |
| <78 512 1046 3200>, /* 400 KB/s*/ |
| <78 512 52286 160000>, /* 20 MB/s */ |
| <78 512 65360 200000>, /* 25 MB/s */ |
| <78 512 130718 400000>, /* 50 MB/s */ |
| <78 512 130718 400000>, /* 100 MB/s */ |
| <78 512 261438 800000>, /* 200 MB/s */ |
| <78 512 261438 800000>, /* 400 MB/s */ |
| <78 512 1338562 4096000>; /* Max. bandwidth */ |
| qcom,bus-bw-vectors-bps = <0 400000 20000000 25000000 |
| 50000000 100000000 200000000 400000000 4294967295>; |
| |
| clocks = <&clock_gcc clk_gcc_sdcc1_ahb_clk>, |
| <&clock_gcc clk_gcc_sdcc1_apps_clk>, |
| <&clock_gcc clk_gcc_sdcc1_ice_core_clk>; |
| clock-names = "iface_clk", "core_clk", "ice_core_clk"; |
| qcom,ice-clk-rates = <200000000 100000000>; |
| |
| qcom,scaling-lower-bus-speed-mode = "DDR52"; |
| status = "disabled"; |
| }; |
| |
| sdhc_2: sdhci@7864900 { |
| compatible = "qcom,sdhci-msm"; |
| reg = <0x7864900 0x500>, <0x7864000 0x800>; |
| reg-names = "hc_mem", "core_mem"; |
| |
| interrupts = <0 125 0>, <0 221 0>; |
| interrupt-names = "hc_irq", "pwr_irq"; |
| |
| qcom,bus-width = <4>; |
| qcom,large-address-bus; |
| |
| qcom,pm-qos-irq-type = "affine_irq"; |
| qcom,pm-qos-irq-latency = <2 200>; |
| |
| qcom,pm-qos-cpu-groups = <0x0f 0xf0>; |
| qcom,pm-qos-legacy-latency-us = <2 200>, <2 200>; |
| |
| qcom,msm-bus,name = "sdhc2"; |
| qcom,msm-bus,num-cases = <8>; |
| qcom,msm-bus,num-paths = <1>; |
| qcom,msm-bus,vectors-KBps = <81 512 0 0>, /* No vote */ |
| <81 512 1046 3200>, /* 400 KB/s*/ |
| <81 512 52286 160000>, /* 20 MB/s */ |
| <81 512 65360 200000>, /* 25 MB/s */ |
| <81 512 130718 400000>, /* 50 MB/s */ |
| <81 512 261438 800000>, /* 100 MB/s */ |
| <81 512 261438 800000>, /* 200 MB/s */ |
| <81 512 1338562 4096000>; /* Max. bandwidth */ |
| qcom,bus-bw-vectors-bps = <0 400000 20000000 25000000 50000000 |
| 100000000 200000000 4294967295>; |
| |
| qcom,devfreq,freq-table = <50000000 200000000>; |
| clocks = <&clock_gcc clk_gcc_sdcc2_ahb_clk>, |
| <&clock_gcc clk_gcc_sdcc2_apps_clk>; |
| clock-names = "iface_clk", "core_clk"; |
| |
| status = "disabled"; |
| }; |
| |
| qcom_seecom: qseecom@85b00000 { |
| compatible = "qcom,qseecom"; |
| reg = <0x85b00000 0x800000>; |
| reg-names = "secapp-region"; |
| qcom,hlos-num-ce-hw-instances = <1>; |
| qcom,hlos-ce-hw-instance = <0>; |
| qcom,qsee-ce-hw-instance = <0>; |
| qcom,disk-encrypt-pipe-pair = <2>; |
| qcom,support-fde; |
| qcom,msm-bus,name = "qseecom-noc"; |
| qcom,msm-bus,num-cases = <4>; |
| qcom,msm-bus,num-paths = <1>; |
| qcom,support-bus-scaling; |
| qcom,msm-bus,vectors-KBps = |
| <55 512 0 0>, |
| <55 512 0 0>, |
| <55 512 120000 1200000>, |
| <55 512 393600 3936000>; |
| clocks = <&clock_gcc clk_crypto_clk_src>, |
| <&clock_gcc clk_gcc_crypto_clk>, |
| <&clock_gcc clk_gcc_crypto_ahb_clk>, |
| <&clock_gcc clk_gcc_crypto_axi_clk>; |
| clock-names = "core_clk_src", "core_clk", |
| "iface_clk", "bus_clk"; |
| qcom,ce-opp-freq = <100000000>; |
| }; |
| |
| qcom_rng: qrng@e3000 { |
| compatible = "qcom,msm-rng"; |
| reg = <0xe3000 0x1000>; |
| qcom,msm-rng-iface-clk; |
| qcom,no-qrng-config; |
| qcom,msm-bus,name = "msm-rng-noc"; |
| qcom,msm-bus,num-cases = <2>; |
| qcom,msm-bus,num-paths = <1>; |
| qcom,msm-bus,vectors-KBps = |
| <1 618 0 0>, /* No vote */ |
| <1 618 0 800>; /* 100 MB/s */ |
| clocks = <&clock_gcc clk_gcc_prng_ahb_clk>; |
| clock-names = "iface_clk"; |
| }; |
| |
| qcom_crypto: qcrypto@720000 { |
| compatible = "qcom,qcrypto"; |
| reg = <0x720000 0x20000>, |
| <0x704000 0x20000>; |
| reg-names = "crypto-base","crypto-bam-base"; |
| interrupts = <0 207 0>; |
| qcom,bam-pipe-pair = <2>; |
| qcom,ce-hw-instance = <0>; |
| qcom,ce-device = <0>; |
| qcom,ce-hw-shared; |
| qcom,clk-mgmt-sus-res; |
| qcom,msm-bus,name = "qcrypto-noc"; |
| qcom,msm-bus,num-cases = <2>; |
| qcom,msm-bus,num-paths = <1>; |
| qcom,msm-bus,vectors-KBps = |
| <55 512 0 0>, |
| <55 512 393600 393600>; |
| clocks = <&clock_gcc clk_crypto_clk_src>, |
| <&clock_gcc clk_gcc_crypto_clk>, |
| <&clock_gcc clk_gcc_crypto_ahb_clk>, |
| <&clock_gcc clk_gcc_crypto_axi_clk>; |
| clock-names = "core_clk_src", "core_clk", |
| "iface_clk", "bus_clk"; |
| qcom,use-sw-aes-cbc-ecb-ctr-algo; |
| qcom,use-sw-aes-xts-algo; |
| qcom,use-sw-aes-ccm-algo; |
| qcom,use-sw-ahash-algo; |
| qcom,use-sw-hmac-algo; |
| qcom,use-sw-aead-algo; |
| qcom,ce-opp-freq = <100000000>; |
| }; |
| |
| qcom_cedev: qcedev@720000 { |
| compatible = "qcom,qcedev"; |
| reg = <0x720000 0x20000>, |
| <0x704000 0x20000>; |
| reg-names = "crypto-base","crypto-bam-base"; |
| interrupts = <0 207 0>; |
| qcom,bam-pipe-pair = <1>; |
| qcom,ce-hw-instance = <0>; |
| qcom,ce-device = <0>; |
| qcom,ce-hw-shared; |
| qcom,msm-bus,name = "qcedev-noc"; |
| qcom,msm-bus,num-cases = <2>; |
| qcom,msm-bus,num-paths = <1>; |
| qcom,msm-bus,vectors-KBps = |
| <55 512 0 0>, |
| <55 512 393600 393600>; |
| clocks = <&clock_gcc clk_crypto_clk_src>, |
| <&clock_gcc clk_gcc_crypto_clk>, |
| <&clock_gcc clk_gcc_crypto_ahb_clk>, |
| <&clock_gcc clk_gcc_crypto_axi_clk>; |
| clock-names = "core_clk_src", "core_clk", |
| "iface_clk", "bus_clk"; |
| qcom,ce-opp-freq = <100000000>; |
| }; |
| |
| pil_mss: qcom,mss@4080000 { |
| compatible = "qcom,pil-q6v55-mss"; |
| reg = <0x04080000 0x100>, |
| <0x0194f000 0x010>, |
| <0x01950000 0x008>, |
| <0x01951000 0x008>, |
| <0x04020000 0x040>, |
| <0x01871000 0x004>; |
| reg-names = "qdsp6_base", "halt_q6", "halt_modem", "halt_nc", |
| "rmb_base", "restart_reg"; |
| |
| interrupts = <GIC_SPI 24 IRQ_TYPE_EDGE_RISING>; |
| vdd_mss-supply = <&pm8937_s1>; |
| vdd_cx-supply = <&pm8937_s2_level>; |
| vdd_cx-voltage = <RPM_SMD_REGULATOR_LEVEL_TURBO>; |
| vdd_mx-supply = <&pm8937_l3_level_ao>; |
| vdd_mx-uV = <RPM_SMD_REGULATOR_LEVEL_TURBO>; |
| vdd_pll-supply = <&pm8937_l7>; |
| qcom,vdd_pll = <1800000>; |
| vdd_mss-uV = <RPM_SMD_REGULATOR_LEVEL_TURBO>; |
| |
| clocks = <&clock_gcc clk_xo_pil_mss_clk>, |
| <&clock_gcc clk_gcc_mss_cfg_ahb_clk>, |
| <&clock_gcc clk_gcc_mss_q6_bimc_axi_clk>, |
| <&clock_gcc clk_gcc_boot_rom_ahb_clk>; |
| clock-names = "xo", "iface_clk", "bus_clk", "mem_clk"; |
| qcom,proxy-clock-names = "xo"; |
| qcom,active-clock-names = "iface_clk", "bus_clk", "mem_clk"; |
| |
| qcom,pas-id = <5>; |
| qcom,pil-mss-memsetup; |
| qcom,firmware-name = "modem"; |
| qcom,pil-self-auth; |
| qcom,override-acc-1 = <0x80800000>; |
| qcom,sysmon-id = <0>; |
| qcom,ssctl-instance-id = <0x12>; |
| qcom,qdsp6v56-1-8-inrush-current; |
| qcom,reset-clk; |
| |
| /* GPIO inputs from mss */ |
| qcom,gpio-err-fatal = <&smp2pgpio_ssr_smp2p_1_in 0 0>; |
| qcom,gpio-err-ready = <&smp2pgpio_ssr_smp2p_1_in 1 0>; |
| qcom,gpio-proxy-unvote = <&smp2pgpio_ssr_smp2p_1_in 2 0>; |
| qcom,gpio-stop-ack = <&smp2pgpio_ssr_smp2p_1_in 3 0>; |
| qcom,gpio-shutdown-ack = <&smp2pgpio_ssr_smp2p_1_in 7 0>; |
| |
| /* GPIO output to mss */ |
| qcom,gpio-force-stop = <&smp2pgpio_ssr_smp2p_1_out 0 0>; |
| |
| memory-region = <&modem_mem>; |
| }; |
| |
| qcom,lpass@c200000 { |
| compatible = "qcom,pil-tz-generic"; |
| reg = <0xc200000 0x00100>; |
| interrupts = <GIC_SPI 293 IRQ_TYPE_EDGE_RISING>; |
| |
| vdd_cx-supply = <&pm8937_s2_level>; |
| qcom,proxy-reg-names = "vdd_cx"; |
| qcom,vdd_cx-uV-uA = <RPM_SMD_REGULATOR_LEVEL_TURBO 100000>; |
| |
| clocks = <&clock_gcc clk_xo_pil_lpass_clk>, |
| <&clock_gcc clk_gcc_crypto_clk>, |
| <&clock_gcc clk_gcc_crypto_ahb_clk>, |
| <&clock_gcc clk_gcc_crypto_axi_clk>, |
| <&clock_gcc clk_crypto_clk_src>; |
| clock-names = "xo", "scm_core_clk", "scm_iface_clk", |
| "scm_bus_clk", "scm_core_clk_src"; |
| qcom,proxy-clock-names = "xo", "scm_core_clk", "scm_iface_clk", |
| "scm_bus_clk", "scm_core_clk_src"; |
| qcom,scm_core_clk_src-freq = <80000000>; |
| |
| qcom,mas-crypto = <&mas_crypto>; |
| qcom,pas-id = <1>; |
| qcom,proxy-timeout-ms = <10000>; |
| qcom,smem-id = <423>; |
| qcom,sysmon-id = <1>; |
| qcom,ssctl-instance-id = <0x14>; |
| qcom,firmware-name = "adsp"; |
| |
| /* GPIO inputs from lpass */ |
| qcom,gpio-err-fatal = <&smp2pgpio_ssr_smp2p_2_in 0 0>; |
| qcom,gpio-proxy-unvote = <&smp2pgpio_ssr_smp2p_2_in 2 0>; |
| qcom,gpio-err-ready = <&smp2pgpio_ssr_smp2p_2_in 1 0>; |
| qcom,gpio-stop-ack = <&smp2pgpio_ssr_smp2p_2_in 3 0>; |
| |
| /* GPIO output to lpass */ |
| qcom,gpio-force-stop = <&smp2pgpio_ssr_smp2p_2_out 0 0>; |
| |
| memory-region = <&adsp_fw_mem>; |
| }; |
| |
| qcom,pronto@a21b000 { |
| compatible = "qcom,pil-tz-generic"; |
| reg = <0x0a21b000 0x3000>; |
| interrupts = <GIC_SPI 149 IRQ_TYPE_EDGE_RISING>; |
| |
| vdd_pronto_pll-supply = <&pm8937_l7>; |
| proxy-reg-names = "vdd_pronto_pll"; |
| vdd_pronto_pll-uV-uA = <1800000 18000>; |
| clocks = <&clock_gcc clk_xo_pil_pronto_clk>, |
| <&clock_gcc clk_gcc_crypto_clk>, |
| <&clock_gcc clk_gcc_crypto_ahb_clk>, |
| <&clock_gcc clk_gcc_crypto_axi_clk>, |
| <&clock_gcc clk_crypto_clk_src>; |
| |
| clock-names = "xo", "scm_core_clk", "scm_iface_clk", |
| "scm_bus_clk", "scm_core_clk_src"; |
| qcom,proxy-clock-names = "xo", "scm_core_clk", "scm_iface_clk", |
| "scm_bus_clk", "scm_core_clk_src"; |
| qcom,scm_core_clk_src = <80000000>; |
| |
| qcom,mas-crypto = <&mas_crypto>; |
| qcom,pas-id = <6>; |
| qcom,proxy-timeout-ms = <10000>; |
| qcom,smem-id = <422>; |
| qcom,sysmon-id = <6>; |
| qcom,ssctl-instance-id = <0x13>; |
| qcom,firmware-name = "wcnss"; |
| |
| /* GPIO inputs from wcnss */ |
| qcom,gpio-err-fatal = <&smp2pgpio_ssr_smp2p_4_in 0 0>; |
| qcom,gpio-err-ready = <&smp2pgpio_ssr_smp2p_4_in 1 0>; |
| qcom,gpio-proxy-unvote = <&smp2pgpio_ssr_smp2p_4_in 2 0>; |
| qcom,gpio-stop-ack = <&smp2pgpio_ssr_smp2p_4_in 3 0>; |
| |
| /* GPIO output to wcnss */ |
| qcom,gpio-force-stop = <&smp2pgpio_ssr_smp2p_4_out 0 0>; |
| memory-region = <&wcnss_fw_mem>; |
| }; |
| |
| qcom,venus@1de0000 { |
| compatible = "qcom,pil-tz-generic"; |
| reg = <0x1de0000 0x4000>; |
| |
| vdd-supply = <&gdsc_venus>; |
| qcom,proxy-reg-names = "vdd"; |
| |
| clocks = <&clock_gcc clk_gcc_venus0_vcodec0_clk>, |
| <&clock_gcc clk_gcc_venus0_ahb_clk>, |
| <&clock_gcc clk_gcc_venus0_axi_clk>, |
| <&clock_gcc clk_gcc_crypto_clk>, |
| <&clock_gcc clk_gcc_crypto_ahb_clk>, |
| <&clock_gcc clk_gcc_crypto_axi_clk>, |
| <&clock_gcc clk_crypto_clk_src>; |
| |
| clock-names = "core_clk", "iface_clk", "bus_clk", |
| "scm_core_clk", "scm_iface_clk", |
| "scm_bus_clk", "scm_core_clk_src"; |
| |
| qcom,proxy-clock-names = "core_clk", "iface_clk", |
| "bus_clk", "scm_core_clk", |
| "scm_iface_clk", "scm_bus_clk", |
| "scm_core_clk_src"; |
| qcom,scm_core_clk_src-freq = <80000000>; |
| |
| qcom,msm-bus,name = "pil-venus"; |
| qcom,msm-bus,num-cases = <2>; |
| qcom,msm-bus,num-paths = <1>; |
| qcom,msm-bus,vectors-KBps = |
| <63 512 0 0>, |
| <63 512 0 304000>; |
| |
| qcom,mas-crypto = <&mas_crypto>; |
| qcom,pas-id = <9>; |
| qcom,proxy-timeout-ms = <100>; |
| qcom,firmware-name = "venus"; |
| memory-region = <&venus_mem>; |
| }; |
| |
| qcom,wcnss-wlan@0a000000 { |
| compatible = "qcom,wcnss_wlan"; |
| reg = <0x0a000000 0x280000>, |
| <0xb011008 0x04>, |
| <0x0a21b000 0x3000>, |
| <0x03204000 0x00000100>, |
| <0x03200800 0x00000200>, |
| <0x0a100400 0x00000200>, |
| <0x0a205050 0x00000200>, |
| <0x0a219000 0x00000020>, |
| <0x0a080488 0x00000008>, |
| <0x0a080fb0 0x00000008>, |
| <0x0a08040c 0x00000008>, |
| <0x0a0120a8 0x00000008>, |
| <0x0a012448 0x00000008>, |
| <0x0a080c00 0x00000001>; |
| |
| reg-names = "wcnss_mmio", "wcnss_fiq", |
| "pronto_phy_base", "riva_phy_base", |
| "riva_ccu_base", "pronto_a2xb_base", |
| "pronto_ccpu_base", "pronto_saw2_base", |
| "wlan_tx_phy_aborts","wlan_brdg_err_source", |
| "wlan_tx_status", "alarms_txctl", |
| "alarms_tactl", "pronto_mcu_base"; |
| |
| interrupts = <0 145 0 0 146 0>; |
| interrupt-names = "wcnss_wlantx_irq", "wcnss_wlanrx_irq"; |
| |
| qcom,pronto-vddmx-supply = <&pm8937_l3_level_ao>; |
| qcom,pronto-vddcx-supply = <&pm8937_s2_level>; |
| qcom,pronto-vddpx-supply = <&pm8937_l5>; |
| qcom,iris-vddxo-supply = <&pm8937_l7>; |
| qcom,iris-vddrfa-supply = <&pm8937_l19>; |
| qcom,iris-vddpa-supply = <&pm8937_l9>; |
| qcom,iris-vdddig-supply = <&pm8937_l5>; |
| |
| qcom,iris-vddxo-voltage-level = <1800000 0 1800000>; |
| qcom,iris-vddrfa-voltage-level = <1300000 0 1300000>; |
| qcom,iris-vddpa-voltage-level = <3300000 0 3300000>; |
| qcom,iris-vdddig-voltage-level = <1800000 0 1800000>; |
| |
| qcom,vddmx-voltage-level = <RPM_SMD_REGULATOR_LEVEL_TURBO |
| RPM_SMD_REGULATOR_LEVEL_NONE |
| RPM_SMD_REGULATOR_LEVEL_TURBO>; |
| qcom,vddcx-voltage-level = <RPM_SMD_REGULATOR_LEVEL_NOM |
| RPM_SMD_REGULATOR_LEVEL_NONE |
| RPM_SMD_REGULATOR_LEVEL_BINNING>; |
| qcom,vddpx-voltage-level = <1800000 0 1800000>; |
| |
| qcom,iris-vddxo-current = <10000>; |
| qcom,iris-vddrfa-current = <100000>; |
| qcom,iris-vddpa-current = <515000>; |
| qcom,iris-vdddig-current = <10000>; |
| |
| qcom,pronto-vddmx-current = <0>; |
| qcom,pronto-vddcx-current = <0>; |
| qcom,pronto-vddpx-current = <0>; |
| |
| pinctrl-names = "wcnss_default", "wcnss_sleep", |
| "wcnss_gpio_default"; |
| pinctrl-0 = <&wcnss_default>; |
| pinctrl-1 = <&wcnss_sleep>; |
| pinctrl-2 = <&wcnss_gpio_default>; |
| |
| gpios = <&tlmm 76 0>, <&tlmm 77 0>, <&tlmm 78 0>, |
| <&tlmm 79 0>, <&tlmm 80 0>; |
| |
| clocks = <&clock_gcc clk_xo_wlan_clk>, |
| <&clock_gcc clk_rf_clk2>, |
| <&clock_debug clk_gcc_debug_mux_8937>, |
| <&clock_gcc clk_wcnss_m_clk>, |
| <&clock_gcc clk_snoc_wcnss_a_clk>; |
| |
| clock-names = "xo", "rf_clk", "measure", "wcnss_debug", |
| "snoc_wcnss"; |
| |
| qcom,snoc-wcnss-clock-freq = <200000000>; |
| |
| qcom,has-autodetect-xo; |
| qcom,is-pronto-v3; |
| qcom,has-pronto-hw; |
| qcom,has-vsys-adc-channel; |
| qcom,wcnss-adc_tm = <&pm8937_adc_tm>; |
| }; |
| |
| bam_dmux: qcom,bam_dmux@4044000 { |
| compatible = "qcom,bam_dmux"; |
| reg = <0x4044000 0x19000>; |
| interrupts = <0 162 1>; |
| qcom,rx-ring-size = <32>; |
| qcom,max-rx-mtu = <4096>; |
| qcom,fast-shutdown; |
| qcom,no-cpu-affinity; |
| }; |
| |
| ssc_sensors: qcom,msm-ssc-sensors { |
| compatible = "qcom,msm-ssc-sensors"; |
| status = "ok"; |
| }; |
| |
| }; |
| |
| #include "pm8937-rpm-regulator.dtsi" |
| #include "msm8937-regulator.dtsi" |
| #include "pm8937.dtsi" |
| #include "msm8937-audio.dtsi" |
| #include "msm8937-camera.dtsi" |
| #include "msm-gdsc-8916.dtsi" |
| #include "msm8937-coresight.dtsi" |
| #include "msm8937-thermal.dtsi" |
| |
| &gdsc_venus { |
| clock-names = "bus_clk", "core_clk"; |
| clocks = <&clock_gcc clk_gcc_venus0_axi_clk>, |
| <&clock_gcc clk_gcc_venus0_vcodec0_clk>; |
| status = "okay"; |
| }; |
| |
| &gdsc_venus_core0 { |
| qcom,support-hw-trigger; |
| clock-names ="core0_clk"; |
| clocks = <&clock_gcc clk_gcc_venus0_core0_vcodec0_clk>; |
| status = "okay"; |
| }; |
| |
| &gdsc_mdss { |
| clock-names = "core_clk", "bus_clk"; |
| clocks = <&clock_gcc clk_gcc_mdss_mdp_clk>, |
| <&clock_gcc clk_gcc_mdss_axi_clk>; |
| qcom,disallow-clear; |
| status = "okay"; |
| }; |
| |
| &gdsc_jpeg { |
| clock-names = "core_clk", "bus_clk"; |
| clocks = <&clock_gcc clk_gcc_camss_jpeg0_clk>, |
| <&clock_gcc clk_gcc_camss_jpeg_axi_clk>; |
| status = "okay"; |
| }; |
| |
| &gdsc_vfe { |
| clock-names = "core_clk", "bus_clk", "micro_clk", |
| "csi_clk"; |
| clocks = <&clock_gcc clk_gcc_camss_vfe0_clk>, |
| <&clock_gcc clk_gcc_camss_vfe_axi_clk>, |
| <&clock_gcc clk_gcc_camss_micro_ahb_clk>, |
| <&clock_gcc clk_gcc_camss_csi_vfe0_clk>; |
| status = "okay"; |
| }; |
| |
| &gdsc_vfe1 { |
| clock-names = "core_clk", "bus_clk", "micro_clk", |
| "csi_clk"; |
| clocks = <&clock_gcc clk_gcc_camss_vfe1_clk>, |
| <&clock_gcc clk_gcc_camss_vfe1_axi_clk>, |
| <&clock_gcc clk_gcc_camss_micro_ahb_clk>, |
| <&clock_gcc clk_gcc_camss_csi_vfe1_clk>; |
| status = "okay"; |
| }; |
| |
| &gdsc_cpp { |
| clock-names = "core_clk", "bus_clk"; |
| clocks = <&clock_gcc clk_gcc_camss_cpp_clk>, |
| <&clock_gcc clk_gcc_camss_cpp_axi_clk>; |
| status = "okay"; |
| }; |
| |
| &gdsc_oxili_gx { |
| clock-names = "core_root_clk"; |
| clocks =<&clock_gcc clk_gfx3d_clk_src>; |
| qcom,enable-root-clk; |
| qcom,clk-dis-wait-val = <0x5>; |
| status = "okay"; |
| }; |
| |
| &gdsc_oxili_cx { |
| reg = <0x1859044 0x4>; |
| clock-names = "core_clk"; |
| clocks = <&clock_gcc clk_gcc_oxili_gfx3d_clk>; |
| status = "okay"; |
| }; |