[ARM] pxa/lpd270: convert to use new MFP API
Signed-off-by: Eric Miao <eric.miao@marvell.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
diff --git a/arch/arm/mach-pxa/lpd270.c b/arch/arm/mach-pxa/lpd270.c
index b703894..8ada6b0 100644
--- a/arch/arm/mach-pxa/lpd270.c
+++ b/arch/arm/mach-pxa/lpd270.c
@@ -40,7 +40,7 @@
#include <mach/pxa-regs.h>
#include <mach/pxa2xx-regs.h>
-#include <mach/pxa2xx-gpio.h>
+#include <mach/mfp-pxa27x.h>
#include <mach/lpd270.h>
#include <mach/audio.h>
#include <mach/pxafb.h>
@@ -51,6 +51,43 @@
#include "generic.h"
#include "devices.h"
+static unsigned long lpd270_pin_config[] __initdata = {
+ /* Chip Selects */
+ GPIO15_nCS_1, /* Mainboard Flash */
+ GPIO78_nCS_2, /* CPLD + Ethernet */
+
+ /* LCD - 16bpp Active TFT */
+ GPIO58_LCD_LDD_0,
+ GPIO59_LCD_LDD_1,
+ GPIO60_LCD_LDD_2,
+ GPIO61_LCD_LDD_3,
+ GPIO62_LCD_LDD_4,
+ GPIO63_LCD_LDD_5,
+ GPIO64_LCD_LDD_6,
+ GPIO65_LCD_LDD_7,
+ GPIO66_LCD_LDD_8,
+ GPIO67_LCD_LDD_9,
+ GPIO68_LCD_LDD_10,
+ GPIO69_LCD_LDD_11,
+ GPIO70_LCD_LDD_12,
+ GPIO71_LCD_LDD_13,
+ GPIO72_LCD_LDD_14,
+ GPIO73_LCD_LDD_15,
+ GPIO74_LCD_FCLK,
+ GPIO75_LCD_LCLK,
+ GPIO76_LCD_PCLK,
+ GPIO77_LCD_BIAS,
+ GPIO16_PWM0_OUT, /* Backlight */
+
+ /* USB Host */
+ GPIO88_USBH1_PWR,
+ GPIO89_USBH1_PEN,
+
+ /* AC97 */
+ GPIO45_AC97_SYSCLK,
+
+ GPIO1_GPIO | WAKEUP_ON_EDGE_BOTH,
+};
static unsigned int lpd270_irq_enabled;
@@ -413,10 +450,6 @@
static int lpd270_ohci_init(struct device *dev)
{
- /* setup Port1 GPIO pin. */
- pxa_gpio_mode(88 | GPIO_ALT_FN_1_IN); /* USBHPWR1 */
- pxa_gpio_mode(89 | GPIO_ALT_FN_2_OUT); /* USBHPEN1 */
-
/* Set the Power Control Polarity Low and Power Sense
Polarity Low to active low. */
UHCHR = (UHCHR | UHCHR_PCPL | UHCHR_PSPL) &
@@ -432,6 +465,8 @@
static void __init lpd270_init(void)
{
+ pxa2xx_mfp_config(ARRAY_AND_SIZE(lpd270_pin_config));
+
lpd270_flash_data[0].width = (BOOT_DEF & 1) ? 2 : 4;
lpd270_flash_data[1].width = 4;
@@ -442,12 +477,6 @@
*/
ARB_CNTRL = ARB_CORE_PARK | 0x234;
- /*
- * On LogicPD PXA270, we route AC97_SYSCLK via GPIO45.
- */
- pxa_gpio_mode(GPIO45_SYSCLK_AC97_MD);
- pxa_gpio_mode(GPIO16_PWM0_MD);
-
platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices));
pxa_set_ac97_info(NULL);
@@ -473,15 +502,6 @@
pxa_map_io();
iotable_init(lpd270_io_desc, ARRAY_SIZE(lpd270_io_desc));
- /* initialize sleep mode regs (wake-up sources, etc) */
- PGSR0 = 0x00008800;
- PGSR1 = 0x00000002;
- PGSR2 = 0x0001FC00;
- PGSR3 = 0x00001F81;
- PWER = 0xC0000002;
- PRER = 0x00000002;
- PFER = 0x00000002;
-
/* for use I SRAM as framebuffer. */
PSLR |= 0x00000F04;
PCFR = 0x00000066;