| /* |
| * Ingenic JZ4780 I2C bus driver |
| * |
| * Copyright (C) 2006 - 2009 Ingenic Semiconductor Inc. |
| * Copyright (C) 2015 Imagination Technologies |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License as published by |
| * the Free Software Foundation; either version 2 of the License, or |
| * (at your option) any later version. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| */ |
| |
| #include <linux/bitops.h> |
| #include <linux/clk.h> |
| #include <linux/completion.h> |
| #include <linux/delay.h> |
| #include <linux/errno.h> |
| #include <linux/i2c.h> |
| #include <linux/init.h> |
| #include <linux/interrupt.h> |
| #include <linux/io.h> |
| #include <linux/kernel.h> |
| #include <linux/module.h> |
| #include <linux/platform_device.h> |
| #include <linux/sched.h> |
| #include <linux/slab.h> |
| #include <linux/time.h> |
| |
| #define JZ4780_I2C_CTRL 0x00 |
| #define JZ4780_I2C_TAR 0x04 |
| #define JZ4780_I2C_SAR 0x08 |
| #define JZ4780_I2C_DC 0x10 |
| #define JZ4780_I2C_SHCNT 0x14 |
| #define JZ4780_I2C_SLCNT 0x18 |
| #define JZ4780_I2C_FHCNT 0x1C |
| #define JZ4780_I2C_FLCNT 0x20 |
| #define JZ4780_I2C_INTST 0x2C |
| #define JZ4780_I2C_INTM 0x30 |
| #define JZ4780_I2C_RXTL 0x38 |
| #define JZ4780_I2C_TXTL 0x3C |
| #define JZ4780_I2C_CINTR 0x40 |
| #define JZ4780_I2C_CRXUF 0x44 |
| #define JZ4780_I2C_CRXOF 0x48 |
| #define JZ4780_I2C_CTXOF 0x4C |
| #define JZ4780_I2C_CRXREQ 0x50 |
| #define JZ4780_I2C_CTXABRT 0x54 |
| #define JZ4780_I2C_CRXDONE 0x58 |
| #define JZ4780_I2C_CACT 0x5C |
| #define JZ4780_I2C_CSTP 0x60 |
| #define JZ4780_I2C_CSTT 0x64 |
| #define JZ4780_I2C_CGC 0x68 |
| #define JZ4780_I2C_ENB 0x6C |
| #define JZ4780_I2C_STA 0x70 |
| #define JZ4780_I2C_TXABRT 0x80 |
| #define JZ4780_I2C_DMACR 0x88 |
| #define JZ4780_I2C_DMATDLR 0x8C |
| #define JZ4780_I2C_DMARDLR 0x90 |
| #define JZ4780_I2C_SDASU 0x94 |
| #define JZ4780_I2C_ACKGC 0x98 |
| #define JZ4780_I2C_ENSTA 0x9C |
| #define JZ4780_I2C_SDAHD 0xD0 |
| |
| #define JZ4780_I2C_CTRL_STPHLD BIT(7) |
| #define JZ4780_I2C_CTRL_SLVDIS BIT(6) |
| #define JZ4780_I2C_CTRL_REST BIT(5) |
| #define JZ4780_I2C_CTRL_MATP BIT(4) |
| #define JZ4780_I2C_CTRL_SATP BIT(3) |
| #define JZ4780_I2C_CTRL_SPDF BIT(2) |
| #define JZ4780_I2C_CTRL_SPDS BIT(1) |
| #define JZ4780_I2C_CTRL_MD BIT(0) |
| |
| #define JZ4780_I2C_STA_SLVACT BIT(6) |
| #define JZ4780_I2C_STA_MSTACT BIT(5) |
| #define JZ4780_I2C_STA_RFF BIT(4) |
| #define JZ4780_I2C_STA_RFNE BIT(3) |
| #define JZ4780_I2C_STA_TFE BIT(2) |
| #define JZ4780_I2C_STA_TFNF BIT(1) |
| #define JZ4780_I2C_STA_ACT BIT(0) |
| |
| static const char * const jz4780_i2c_abrt_src[] = { |
| "ABRT_7B_ADDR_NOACK", |
| "ABRT_10ADDR1_NOACK", |
| "ABRT_10ADDR2_NOACK", |
| "ABRT_XDATA_NOACK", |
| "ABRT_GCALL_NOACK", |
| "ABRT_GCALL_READ", |
| "ABRT_HS_ACKD", |
| "SBYTE_ACKDET", |
| "ABRT_HS_NORSTRT", |
| "SBYTE_NORSTRT", |
| "ABRT_10B_RD_NORSTRT", |
| "ABRT_MASTER_DIS", |
| "ARB_LOST", |
| "SLVFLUSH_TXFIFO", |
| "SLV_ARBLOST", |
| "SLVRD_INTX", |
| }; |
| |
| #define JZ4780_I2C_INTST_IGC BIT(11) |
| #define JZ4780_I2C_INTST_ISTT BIT(10) |
| #define JZ4780_I2C_INTST_ISTP BIT(9) |
| #define JZ4780_I2C_INTST_IACT BIT(8) |
| #define JZ4780_I2C_INTST_RXDN BIT(7) |
| #define JZ4780_I2C_INTST_TXABT BIT(6) |
| #define JZ4780_I2C_INTST_RDREQ BIT(5) |
| #define JZ4780_I2C_INTST_TXEMP BIT(4) |
| #define JZ4780_I2C_INTST_TXOF BIT(3) |
| #define JZ4780_I2C_INTST_RXFL BIT(2) |
| #define JZ4780_I2C_INTST_RXOF BIT(1) |
| #define JZ4780_I2C_INTST_RXUF BIT(0) |
| |
| #define JZ4780_I2C_INTM_MIGC BIT(11) |
| #define JZ4780_I2C_INTM_MISTT BIT(10) |
| #define JZ4780_I2C_INTM_MISTP BIT(9) |
| #define JZ4780_I2C_INTM_MIACT BIT(8) |
| #define JZ4780_I2C_INTM_MRXDN BIT(7) |
| #define JZ4780_I2C_INTM_MTXABT BIT(6) |
| #define JZ4780_I2C_INTM_MRDREQ BIT(5) |
| #define JZ4780_I2C_INTM_MTXEMP BIT(4) |
| #define JZ4780_I2C_INTM_MTXOF BIT(3) |
| #define JZ4780_I2C_INTM_MRXFL BIT(2) |
| #define JZ4780_I2C_INTM_MRXOF BIT(1) |
| #define JZ4780_I2C_INTM_MRXUF BIT(0) |
| |
| #define JZ4780_I2C_DC_READ BIT(8) |
| |
| #define JZ4780_I2C_SDAHD_HDENB BIT(8) |
| |
| #define JZ4780_I2C_ENB_I2C BIT(0) |
| |
| #define JZ4780_I2CSHCNT_ADJUST(n) (((n) - 8) < 6 ? 6 : ((n) - 8)) |
| #define JZ4780_I2CSLCNT_ADJUST(n) (((n) - 1) < 8 ? 8 : ((n) - 1)) |
| #define JZ4780_I2CFHCNT_ADJUST(n) (((n) - 8) < 6 ? 6 : ((n) - 8)) |
| #define JZ4780_I2CFLCNT_ADJUST(n) (((n) - 1) < 8 ? 8 : ((n) - 1)) |
| |
| #define JZ4780_I2C_FIFO_LEN 16 |
| #define TX_LEVEL 3 |
| #define RX_LEVEL (JZ4780_I2C_FIFO_LEN - TX_LEVEL - 1) |
| |
| #define JZ4780_I2C_TIMEOUT 300 |
| |
| #define BUFSIZE 200 |
| |
| struct jz4780_i2c { |
| void __iomem *iomem; |
| int irq; |
| struct clk *clk; |
| struct i2c_adapter adap; |
| |
| /* lock to protect rbuf and wbuf between xfer_rd/wr and irq handler */ |
| spinlock_t lock; |
| |
| /* beginning of lock scope */ |
| unsigned char *rbuf; |
| int rd_total_len; |
| int rd_data_xfered; |
| int rd_cmd_xfered; |
| |
| unsigned char *wbuf; |
| int wt_len; |
| |
| int is_write; |
| int stop_hold; |
| int speed; |
| |
| int data_buf[BUFSIZE]; |
| int cmd_buf[BUFSIZE]; |
| int cmd; |
| |
| /* end of lock scope */ |
| struct completion trans_waitq; |
| }; |
| |
| static inline unsigned short jz4780_i2c_readw(struct jz4780_i2c *i2c, |
| unsigned long offset) |
| { |
| return readw(i2c->iomem + offset); |
| } |
| |
| static inline void jz4780_i2c_writew(struct jz4780_i2c *i2c, |
| unsigned long offset, unsigned short val) |
| { |
| writew(val, i2c->iomem + offset); |
| } |
| |
| static int jz4780_i2c_disable(struct jz4780_i2c *i2c) |
| { |
| unsigned short regval; |
| unsigned long loops = 5; |
| |
| jz4780_i2c_writew(i2c, JZ4780_I2C_ENB, 0); |
| |
| do { |
| regval = jz4780_i2c_readw(i2c, JZ4780_I2C_ENSTA); |
| if (!(regval & JZ4780_I2C_ENB_I2C)) |
| return 0; |
| |
| usleep_range(5000, 15000); |
| } while (--loops); |
| |
| dev_err(&i2c->adap.dev, "disable failed: ENSTA=0x%04x\n", regval); |
| return -ETIMEDOUT; |
| } |
| |
| static int jz4780_i2c_enable(struct jz4780_i2c *i2c) |
| { |
| unsigned short regval; |
| unsigned long loops = 5; |
| |
| jz4780_i2c_writew(i2c, JZ4780_I2C_ENB, 1); |
| |
| do { |
| regval = jz4780_i2c_readw(i2c, JZ4780_I2C_ENSTA); |
| if (regval & JZ4780_I2C_ENB_I2C) |
| return 0; |
| |
| usleep_range(5000, 15000); |
| } while (--loops); |
| |
| dev_err(&i2c->adap.dev, "enable failed: ENSTA=0x%04x\n", regval); |
| return -ETIMEDOUT; |
| } |
| |
| static int jz4780_i2c_set_target(struct jz4780_i2c *i2c, unsigned char address) |
| { |
| unsigned short regval; |
| unsigned long loops = 5; |
| |
| do { |
| regval = jz4780_i2c_readw(i2c, JZ4780_I2C_STA); |
| if ((regval & JZ4780_I2C_STA_TFE) && |
| !(regval & JZ4780_I2C_STA_MSTACT)) |
| break; |
| |
| usleep_range(5000, 15000); |
| } while (--loops); |
| |
| if (loops) { |
| jz4780_i2c_writew(i2c, JZ4780_I2C_TAR, address); |
| return 0; |
| } |
| |
| dev_err(&i2c->adap.dev, |
| "set device to address 0x%02x failed, STA=0x%04x\n", |
| address, regval); |
| |
| return -ENXIO; |
| } |
| |
| static int jz4780_i2c_set_speed(struct jz4780_i2c *i2c) |
| { |
| int dev_clk_khz = clk_get_rate(i2c->clk) / 1000; |
| int cnt_high = 0; /* HIGH period count of the SCL clock */ |
| int cnt_low = 0; /* LOW period count of the SCL clock */ |
| int cnt_period = 0; /* period count of the SCL clock */ |
| int setup_time = 0; |
| int hold_time = 0; |
| unsigned short tmp = 0; |
| int i2c_clk = i2c->speed; |
| |
| if (jz4780_i2c_disable(i2c)) |
| dev_dbg(&i2c->adap.dev, "i2c not disabled\n"); |
| |
| /* |
| * 1 JZ4780_I2C cycle equals to cnt_period PCLK(i2c_clk) |
| * standard mode, min LOW and HIGH period are 4700 ns and 4000 ns |
| * fast mode, min LOW and HIGH period are 1300 ns and 600 ns |
| */ |
| cnt_period = dev_clk_khz / i2c_clk; |
| |
| if (i2c_clk <= 100) |
| cnt_high = (cnt_period * 4000) / (4700 + 4000); |
| else |
| cnt_high = (cnt_period * 600) / (1300 + 600); |
| |
| cnt_low = cnt_period - cnt_high; |
| |
| /* |
| * NOTE: JZ4780_I2C_CTRL_REST can't set when i2c enabled, because |
| * normal read are 2 messages, we cannot disable i2c controller |
| * between these two messages, this means that we must always set |
| * JZ4780_I2C_CTRL_REST when init JZ4780_I2C_CTRL |
| * |
| */ |
| if (i2c_clk <= 100) { |
| tmp = JZ4780_I2C_CTRL_SPDS | JZ4780_I2C_CTRL_REST |
| | JZ4780_I2C_CTRL_SLVDIS | JZ4780_I2C_CTRL_MD; |
| jz4780_i2c_writew(i2c, JZ4780_I2C_CTRL, tmp); |
| |
| jz4780_i2c_writew(i2c, JZ4780_I2C_SHCNT, |
| JZ4780_I2CSHCNT_ADJUST(cnt_high)); |
| jz4780_i2c_writew(i2c, JZ4780_I2C_SLCNT, |
| JZ4780_I2CSLCNT_ADJUST(cnt_low)); |
| } else { |
| tmp = JZ4780_I2C_CTRL_SPDF | JZ4780_I2C_CTRL_REST |
| | JZ4780_I2C_CTRL_SLVDIS | JZ4780_I2C_CTRL_MD; |
| jz4780_i2c_writew(i2c, JZ4780_I2C_CTRL, tmp); |
| |
| jz4780_i2c_writew(i2c, JZ4780_I2C_FHCNT, |
| JZ4780_I2CFHCNT_ADJUST(cnt_high)); |
| jz4780_i2c_writew(i2c, JZ4780_I2C_FLCNT, |
| JZ4780_I2CFLCNT_ADJUST(cnt_low)); |
| } |
| |
| /* |
| * a i2c device must internally provide a hold time at least 300ns |
| * tHD:DAT |
| * Standard Mode: min=300ns, max=3450ns |
| * Fast Mode: min=0ns, max=900ns |
| * tSU:DAT |
| * Standard Mode: min=250ns, max=infinite |
| * Fast Mode: min=100(250ns is recommended), max=infinite |
| * |
| * 1i2c_clk = 10^6 / dev_clk_khz |
| * on FPGA, dev_clk_khz = 12000, so 1i2c_clk = 1000/12 = 83ns |
| * on Pisces(1008M), dev_clk_khz=126000, so 1i2c_clk = 1000 / 126 = 8ns |
| * |
| * The actual hold time is (SDAHD + 1) * (i2c_clk period). |
| * |
| * Length of setup time calculated using (SDASU - 1) * (ic_clk_period) |
| * |
| */ |
| if (i2c_clk <= 100) { /* standard mode */ |
| setup_time = 300; |
| hold_time = 400; |
| } else { |
| setup_time = 450; |
| hold_time = 450; |
| } |
| |
| hold_time = ((hold_time * dev_clk_khz) / 1000000) - 1; |
| setup_time = ((setup_time * dev_clk_khz) / 1000000) + 1; |
| |
| if (setup_time > 255) |
| setup_time = 255; |
| |
| if (setup_time <= 0) |
| setup_time = 1; |
| |
| jz4780_i2c_writew(i2c, JZ4780_I2C_SDASU, setup_time); |
| |
| if (hold_time > 255) |
| hold_time = 255; |
| |
| if (hold_time >= 0) { |
| /*i2c hold time enable */ |
| hold_time |= JZ4780_I2C_SDAHD_HDENB; |
| jz4780_i2c_writew(i2c, JZ4780_I2C_SDAHD, hold_time); |
| } else { |
| /* disable hold time */ |
| jz4780_i2c_writew(i2c, JZ4780_I2C_SDAHD, 0); |
| } |
| |
| return 0; |
| } |
| |
| static int jz4780_i2c_cleanup(struct jz4780_i2c *i2c) |
| { |
| int ret; |
| unsigned long flags; |
| unsigned short tmp; |
| |
| spin_lock_irqsave(&i2c->lock, flags); |
| |
| /* can send stop now if need */ |
| tmp = jz4780_i2c_readw(i2c, JZ4780_I2C_CTRL); |
| tmp &= ~JZ4780_I2C_CTRL_STPHLD; |
| jz4780_i2c_writew(i2c, JZ4780_I2C_CTRL, tmp); |
| |
| /* disable all interrupts first */ |
| jz4780_i2c_writew(i2c, JZ4780_I2C_INTM, 0); |
| |
| /* then clear all interrupts */ |
| jz4780_i2c_readw(i2c, JZ4780_I2C_CTXABRT); |
| jz4780_i2c_readw(i2c, JZ4780_I2C_CINTR); |
| |
| /* then disable the controller */ |
| tmp = jz4780_i2c_readw(i2c, JZ4780_I2C_CTRL); |
| tmp &= ~JZ4780_I2C_ENB_I2C; |
| jz4780_i2c_writew(i2c, JZ4780_I2C_CTRL, tmp); |
| udelay(10); |
| tmp |= JZ4780_I2C_ENB_I2C; |
| jz4780_i2c_writew(i2c, JZ4780_I2C_CTRL, tmp); |
| |
| spin_unlock_irqrestore(&i2c->lock, flags); |
| |
| ret = jz4780_i2c_disable(i2c); |
| if (ret) |
| dev_err(&i2c->adap.dev, |
| "unable to disable device during cleanup!\n"); |
| |
| if (unlikely(jz4780_i2c_readw(i2c, JZ4780_I2C_INTM) |
| & jz4780_i2c_readw(i2c, JZ4780_I2C_INTST))) |
| dev_err(&i2c->adap.dev, |
| "device has interrupts after a complete cleanup!\n"); |
| |
| return ret; |
| } |
| |
| static int jz4780_i2c_prepare(struct jz4780_i2c *i2c) |
| { |
| jz4780_i2c_set_speed(i2c); |
| return jz4780_i2c_enable(i2c); |
| } |
| |
| static void jz4780_i2c_send_rcmd(struct jz4780_i2c *i2c, int cmd_count) |
| { |
| int i; |
| |
| for (i = 0; i < cmd_count; i++) |
| jz4780_i2c_writew(i2c, JZ4780_I2C_DC, JZ4780_I2C_DC_READ); |
| } |
| |
| static void jz4780_i2c_trans_done(struct jz4780_i2c *i2c) |
| { |
| jz4780_i2c_writew(i2c, JZ4780_I2C_INTM, 0); |
| complete(&i2c->trans_waitq); |
| } |
| |
| static irqreturn_t jz4780_i2c_irq(int irqno, void *dev_id) |
| { |
| unsigned short tmp; |
| unsigned short intst; |
| unsigned short intmsk; |
| struct jz4780_i2c *i2c = dev_id; |
| unsigned long flags; |
| |
| spin_lock_irqsave(&i2c->lock, flags); |
| intmsk = jz4780_i2c_readw(i2c, JZ4780_I2C_INTM); |
| intst = jz4780_i2c_readw(i2c, JZ4780_I2C_INTST); |
| |
| intst &= intmsk; |
| |
| if (intst & JZ4780_I2C_INTST_TXABT) { |
| jz4780_i2c_trans_done(i2c); |
| goto done; |
| } |
| |
| if (intst & JZ4780_I2C_INTST_RXOF) { |
| dev_dbg(&i2c->adap.dev, "received fifo overflow!\n"); |
| jz4780_i2c_trans_done(i2c); |
| goto done; |
| } |
| |
| /* |
| * When reading, always drain RX FIFO before we send more Read |
| * Commands to avoid fifo overrun |
| */ |
| if (i2c->is_write == 0) { |
| int rd_left; |
| |
| while ((jz4780_i2c_readw(i2c, JZ4780_I2C_STA) |
| & JZ4780_I2C_STA_RFNE)) { |
| *(i2c->rbuf++) = jz4780_i2c_readw(i2c, JZ4780_I2C_DC) |
| & 0xff; |
| i2c->rd_data_xfered++; |
| if (i2c->rd_data_xfered == i2c->rd_total_len) { |
| jz4780_i2c_trans_done(i2c); |
| goto done; |
| } |
| } |
| |
| rd_left = i2c->rd_total_len - i2c->rd_data_xfered; |
| |
| if (rd_left <= JZ4780_I2C_FIFO_LEN) |
| jz4780_i2c_writew(i2c, JZ4780_I2C_RXTL, rd_left - 1); |
| } |
| |
| if (intst & JZ4780_I2C_INTST_TXEMP) { |
| if (i2c->is_write == 0) { |
| int cmd_left = i2c->rd_total_len - i2c->rd_cmd_xfered; |
| int max_send = (JZ4780_I2C_FIFO_LEN - 1) |
| - (i2c->rd_cmd_xfered |
| - i2c->rd_data_xfered); |
| int cmd_to_send = min(cmd_left, max_send); |
| |
| if (i2c->rd_cmd_xfered != 0) |
| cmd_to_send = min(cmd_to_send, |
| JZ4780_I2C_FIFO_LEN |
| - TX_LEVEL - 1); |
| |
| if (cmd_to_send) { |
| jz4780_i2c_send_rcmd(i2c, cmd_to_send); |
| i2c->rd_cmd_xfered += cmd_to_send; |
| } |
| |
| cmd_left = i2c->rd_total_len - i2c->rd_cmd_xfered; |
| if (cmd_left == 0) { |
| intmsk = jz4780_i2c_readw(i2c, JZ4780_I2C_INTM); |
| intmsk &= ~JZ4780_I2C_INTM_MTXEMP; |
| jz4780_i2c_writew(i2c, JZ4780_I2C_INTM, intmsk); |
| |
| tmp = jz4780_i2c_readw(i2c, JZ4780_I2C_CTRL); |
| tmp &= ~JZ4780_I2C_CTRL_STPHLD; |
| jz4780_i2c_writew(i2c, JZ4780_I2C_CTRL, tmp); |
| } |
| } else { |
| unsigned short data; |
| unsigned short i2c_sta; |
| |
| i2c_sta = jz4780_i2c_readw(i2c, JZ4780_I2C_STA); |
| |
| while ((i2c_sta & JZ4780_I2C_STA_TFNF) && |
| (i2c->wt_len > 0)) { |
| i2c_sta = jz4780_i2c_readw(i2c, JZ4780_I2C_STA); |
| data = *i2c->wbuf; |
| data &= ~JZ4780_I2C_DC_READ; |
| jz4780_i2c_writew(i2c, JZ4780_I2C_DC, |
| data); |
| i2c->wbuf++; |
| i2c->wt_len--; |
| } |
| |
| if (i2c->wt_len == 0) { |
| if (!i2c->stop_hold) { |
| tmp = jz4780_i2c_readw(i2c, |
| JZ4780_I2C_CTRL); |
| tmp &= ~JZ4780_I2C_CTRL_STPHLD; |
| jz4780_i2c_writew(i2c, JZ4780_I2C_CTRL, |
| tmp); |
| } |
| |
| jz4780_i2c_trans_done(i2c); |
| goto done; |
| } |
| } |
| } |
| |
| done: |
| spin_unlock_irqrestore(&i2c->lock, flags); |
| return IRQ_HANDLED; |
| } |
| |
| static void jz4780_i2c_txabrt(struct jz4780_i2c *i2c, int src) |
| { |
| int i; |
| |
| dev_err(&i2c->adap.dev, "txabrt: 0x%08x\n", src); |
| dev_err(&i2c->adap.dev, "device addr=%x\n", |
| jz4780_i2c_readw(i2c, JZ4780_I2C_TAR)); |
| dev_err(&i2c->adap.dev, "send cmd count:%d %d\n", |
| i2c->cmd, i2c->cmd_buf[i2c->cmd]); |
| dev_err(&i2c->adap.dev, "receive data count:%d %d\n", |
| i2c->cmd, i2c->data_buf[i2c->cmd]); |
| |
| for (i = 0; i < 16; i++) { |
| if (src & BIT(i)) |
| dev_dbg(&i2c->adap.dev, "I2C TXABRT[%d]=%s\n", |
| i, jz4780_i2c_abrt_src[i]); |
| } |
| } |
| |
| static inline int jz4780_i2c_xfer_read(struct jz4780_i2c *i2c, |
| unsigned char *buf, int len, int cnt, |
| int idx) |
| { |
| int ret = 0; |
| long timeout; |
| int wait_time = JZ4780_I2C_TIMEOUT * (len + 5); |
| unsigned short tmp; |
| unsigned long flags; |
| |
| memset(buf, 0, len); |
| |
| spin_lock_irqsave(&i2c->lock, flags); |
| |
| i2c->stop_hold = 0; |
| i2c->is_write = 0; |
| i2c->rbuf = buf; |
| i2c->rd_total_len = len; |
| i2c->rd_data_xfered = 0; |
| i2c->rd_cmd_xfered = 0; |
| |
| if (len <= JZ4780_I2C_FIFO_LEN) |
| jz4780_i2c_writew(i2c, JZ4780_I2C_RXTL, len - 1); |
| else |
| jz4780_i2c_writew(i2c, JZ4780_I2C_RXTL, RX_LEVEL); |
| |
| jz4780_i2c_writew(i2c, JZ4780_I2C_TXTL, TX_LEVEL); |
| |
| jz4780_i2c_writew(i2c, JZ4780_I2C_INTM, |
| JZ4780_I2C_INTM_MRXFL | JZ4780_I2C_INTM_MTXEMP |
| | JZ4780_I2C_INTM_MTXABT | JZ4780_I2C_INTM_MRXOF); |
| |
| tmp = jz4780_i2c_readw(i2c, JZ4780_I2C_CTRL); |
| tmp |= JZ4780_I2C_CTRL_STPHLD; |
| jz4780_i2c_writew(i2c, JZ4780_I2C_CTRL, tmp); |
| |
| spin_unlock_irqrestore(&i2c->lock, flags); |
| |
| timeout = wait_for_completion_timeout(&i2c->trans_waitq, |
| msecs_to_jiffies(wait_time)); |
| |
| if (!timeout) { |
| dev_err(&i2c->adap.dev, "irq read timeout\n"); |
| dev_dbg(&i2c->adap.dev, "send cmd count:%d %d\n", |
| i2c->cmd, i2c->cmd_buf[i2c->cmd]); |
| dev_dbg(&i2c->adap.dev, "receive data count:%d %d\n", |
| i2c->cmd, i2c->data_buf[i2c->cmd]); |
| ret = -EIO; |
| } |
| |
| tmp = jz4780_i2c_readw(i2c, JZ4780_I2C_TXABRT); |
| if (tmp) { |
| jz4780_i2c_txabrt(i2c, tmp); |
| ret = -EIO; |
| } |
| |
| return ret; |
| } |
| |
| static inline int jz4780_i2c_xfer_write(struct jz4780_i2c *i2c, |
| unsigned char *buf, int len, |
| int cnt, int idx) |
| { |
| int ret = 0; |
| int wait_time = JZ4780_I2C_TIMEOUT * (len + 5); |
| long timeout; |
| unsigned short tmp; |
| unsigned long flags; |
| |
| spin_lock_irqsave(&i2c->lock, flags); |
| |
| if (idx < (cnt - 1)) |
| i2c->stop_hold = 1; |
| else |
| i2c->stop_hold = 0; |
| |
| i2c->is_write = 1; |
| i2c->wbuf = buf; |
| i2c->wt_len = len; |
| |
| jz4780_i2c_writew(i2c, JZ4780_I2C_TXTL, TX_LEVEL); |
| |
| jz4780_i2c_writew(i2c, JZ4780_I2C_INTM, JZ4780_I2C_INTM_MTXEMP |
| | JZ4780_I2C_INTM_MTXABT); |
| |
| tmp = jz4780_i2c_readw(i2c, JZ4780_I2C_CTRL); |
| tmp |= JZ4780_I2C_CTRL_STPHLD; |
| jz4780_i2c_writew(i2c, JZ4780_I2C_CTRL, tmp); |
| |
| spin_unlock_irqrestore(&i2c->lock, flags); |
| |
| timeout = wait_for_completion_timeout(&i2c->trans_waitq, |
| msecs_to_jiffies(wait_time)); |
| if (timeout && !i2c->stop_hold) { |
| unsigned short i2c_sta; |
| int write_in_process; |
| |
| timeout = JZ4780_I2C_TIMEOUT * 100; |
| for (; timeout > 0; timeout--) { |
| i2c_sta = jz4780_i2c_readw(i2c, JZ4780_I2C_STA); |
| |
| write_in_process = (i2c_sta & JZ4780_I2C_STA_MSTACT) || |
| !(i2c_sta & JZ4780_I2C_STA_TFE); |
| if (!write_in_process) |
| break; |
| udelay(10); |
| } |
| } |
| |
| if (!timeout) { |
| dev_err(&i2c->adap.dev, "write wait timeout\n"); |
| ret = -EIO; |
| } |
| |
| tmp = jz4780_i2c_readw(i2c, JZ4780_I2C_TXABRT); |
| if (tmp) { |
| jz4780_i2c_txabrt(i2c, tmp); |
| ret = -EIO; |
| } |
| |
| return ret; |
| } |
| |
| static int jz4780_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg *msg, |
| int count) |
| { |
| int i = -EIO; |
| int ret = 0; |
| struct jz4780_i2c *i2c = adap->algo_data; |
| |
| ret = jz4780_i2c_prepare(i2c); |
| if (ret) { |
| dev_err(&i2c->adap.dev, "I2C prepare failed\n"); |
| goto out; |
| } |
| |
| if (msg->addr != jz4780_i2c_readw(i2c, JZ4780_I2C_TAR)) { |
| ret = jz4780_i2c_set_target(i2c, msg->addr); |
| if (ret) |
| goto out; |
| } |
| for (i = 0; i < count; i++, msg++) { |
| if (msg->flags & I2C_M_RD) |
| ret = jz4780_i2c_xfer_read(i2c, msg->buf, msg->len, |
| count, i); |
| else |
| ret = jz4780_i2c_xfer_write(i2c, msg->buf, msg->len, |
| count, i); |
| |
| if (ret) |
| goto out; |
| } |
| |
| ret = i; |
| |
| out: |
| jz4780_i2c_cleanup(i2c); |
| return ret; |
| } |
| |
| static u32 jz4780_i2c_functionality(struct i2c_adapter *adap) |
| { |
| return I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL; |
| } |
| |
| static const struct i2c_algorithm jz4780_i2c_algorithm = { |
| .master_xfer = jz4780_i2c_xfer, |
| .functionality = jz4780_i2c_functionality, |
| }; |
| |
| static const struct of_device_id jz4780_i2c_of_matches[] = { |
| { .compatible = "ingenic,jz4780-i2c", }, |
| { /* sentinel */ } |
| }; |
| |
| static int jz4780_i2c_probe(struct platform_device *pdev) |
| { |
| int ret = 0; |
| unsigned int clk_freq = 0; |
| unsigned short tmp; |
| struct resource *r; |
| struct jz4780_i2c *i2c; |
| |
| i2c = devm_kzalloc(&pdev->dev, sizeof(struct jz4780_i2c), GFP_KERNEL); |
| if (!i2c) |
| return -ENOMEM; |
| |
| i2c->adap.owner = THIS_MODULE; |
| i2c->adap.algo = &jz4780_i2c_algorithm; |
| i2c->adap.algo_data = i2c; |
| i2c->adap.retries = 5; |
| i2c->adap.dev.parent = &pdev->dev; |
| i2c->adap.dev.of_node = pdev->dev.of_node; |
| sprintf(i2c->adap.name, "%s", pdev->name); |
| |
| init_completion(&i2c->trans_waitq); |
| spin_lock_init(&i2c->lock); |
| |
| r = platform_get_resource(pdev, IORESOURCE_MEM, 0); |
| i2c->iomem = devm_ioremap_resource(&pdev->dev, r); |
| if (IS_ERR(i2c->iomem)) |
| return PTR_ERR(i2c->iomem); |
| |
| platform_set_drvdata(pdev, i2c); |
| |
| i2c->clk = devm_clk_get(&pdev->dev, NULL); |
| if (IS_ERR(i2c->clk)) |
| return PTR_ERR(i2c->clk); |
| |
| ret = clk_prepare_enable(i2c->clk); |
| if (ret) |
| return ret; |
| |
| ret = of_property_read_u32(pdev->dev.of_node, "clock-frequency", |
| &clk_freq); |
| if (ret) { |
| dev_err(&pdev->dev, "clock-frequency not specified in DT\n"); |
| goto err; |
| } |
| |
| i2c->speed = clk_freq / 1000; |
| if (i2c->speed == 0) { |
| ret = -EINVAL; |
| dev_err(&pdev->dev, "clock-frequency minimum is 1000\n"); |
| goto err; |
| } |
| jz4780_i2c_set_speed(i2c); |
| |
| dev_info(&pdev->dev, "Bus frequency is %d KHz\n", i2c->speed); |
| |
| tmp = jz4780_i2c_readw(i2c, JZ4780_I2C_CTRL); |
| tmp &= ~JZ4780_I2C_CTRL_STPHLD; |
| jz4780_i2c_writew(i2c, JZ4780_I2C_CTRL, tmp); |
| |
| jz4780_i2c_writew(i2c, JZ4780_I2C_INTM, 0x0); |
| |
| i2c->irq = platform_get_irq(pdev, 0); |
| ret = devm_request_irq(&pdev->dev, i2c->irq, jz4780_i2c_irq, 0, |
| dev_name(&pdev->dev), i2c); |
| if (ret) |
| goto err; |
| |
| ret = i2c_add_adapter(&i2c->adap); |
| if (ret < 0) { |
| dev_err(&pdev->dev, "Failed to add bus\n"); |
| goto err; |
| } |
| |
| return 0; |
| |
| err: |
| clk_disable_unprepare(i2c->clk); |
| return ret; |
| } |
| |
| static int jz4780_i2c_remove(struct platform_device *pdev) |
| { |
| struct jz4780_i2c *i2c = platform_get_drvdata(pdev); |
| |
| clk_disable_unprepare(i2c->clk); |
| i2c_del_adapter(&i2c->adap); |
| return 0; |
| } |
| |
| static struct platform_driver jz4780_i2c_driver = { |
| .probe = jz4780_i2c_probe, |
| .remove = jz4780_i2c_remove, |
| .driver = { |
| .name = "jz4780-i2c", |
| .of_match_table = of_match_ptr(jz4780_i2c_of_matches), |
| }, |
| }; |
| |
| module_platform_driver(jz4780_i2c_driver); |
| |
| MODULE_LICENSE("GPL"); |
| MODULE_AUTHOR("ztyan<ztyan@ingenic.cn>"); |
| MODULE_DESCRIPTION("i2c driver for JZ4780 SoCs"); |