sh: do away with ARCH_[WANT_OPTIONAL|REQUIRE]_GPIOLIB
This replaces:
- "select ARCH_REQUIRE_GPIOLIB" with "select GPIOLIB" as this can
now be selected directly.
- "select ARCH_WANT_OPTIONAL_GPIOLIB" with no dependency: GPIOLIB
is now selectable by everyone, so we need not declare our
intent to select it.
When ordering the symbols the following rationale was used:
if the selects were in alphabetical order, I moved select GPIOLIB
to be in alphabetical order, but if the selects were not
maintained in alphabetical order, I just replaced
"select ARCH_REQUIRE_GPIOLIB" with "select GPIOLIB".
Cc: Michael Büsch <m@bues.ch>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Cc: Rich Felker <dalias@libc.org>
Cc: linux-sh@vger.kernel.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
diff --git a/arch/sh/Kconfig b/arch/sh/Kconfig
index e803a83..0d5f3a9 100644
--- a/arch/sh/Kconfig
+++ b/arch/sh/Kconfig
@@ -264,7 +264,6 @@
select CPU_HAS_FPU
select SYS_SUPPORTS_SH_CMT
select SYS_SUPPORTS_SH_MTU2
- select ARCH_WANT_OPTIONAL_GPIOLIB
select PINCTRL
config CPU_SUBTYPE_SH7206
@@ -353,7 +352,6 @@
select CPU_SH3
select CPU_HAS_DSP
select SYS_SUPPORTS_SH_CMT
- select ARCH_WANT_OPTIONAL_GPIOLIB
select USB_OHCI_SH if USB_OHCI_HCD
select PINCTRL
help
@@ -419,7 +417,6 @@
select ARCH_SHMOBILE
select ARCH_SPARSEMEM_ENABLE
select SYS_SUPPORTS_SH_CMT
- select ARCH_WANT_OPTIONAL_GPIOLIB
select PINCTRL
help
Select SH7723 if you have an SH-MobileR2 CPU.
@@ -431,7 +428,6 @@
select ARCH_SHMOBILE
select ARCH_SPARSEMEM_ENABLE
select SYS_SUPPORTS_SH_CMT
- select ARCH_WANT_OPTIONAL_GPIOLIB
select PINCTRL
help
Select SH7724 if you have an SH-MobileR2R CPU.
@@ -440,7 +436,6 @@
bool "Support SH7734 processor"
select CPU_SH4A
select CPU_SHX2
- select ARCH_WANT_OPTIONAL_GPIOLIB
select PINCTRL
help
Select SH7734 if you have a SH4A SH7734 CPU.
@@ -449,7 +444,6 @@
bool "Support SH7757 processor"
select CPU_SH4A
select CPU_SHX2
- select ARCH_WANT_OPTIONAL_GPIOLIB
select PINCTRL
help
Select SH7757 if you have a SH4A SH7757 CPU.
@@ -475,7 +469,6 @@
select CPU_SHX2
select ARCH_SPARSEMEM_ENABLE
select SYS_SUPPORTS_NUMA
- select ARCH_WANT_OPTIONAL_GPIOLIB
select PINCTRL
config CPU_SUBTYPE_SH7786
@@ -484,7 +477,6 @@
select CPU_SHX3
select CPU_HAS_PTEAEX
select GENERIC_CLOCKEVENTS_BROADCAST if SMP
- select ARCH_WANT_OPTIONAL_GPIOLIB
select USB_OHCI_SH if USB_OHCI_HCD
select USB_EHCI_SH if USB_EHCI_HCD
select PINCTRL
@@ -494,7 +486,7 @@
select CPU_SH4A
select CPU_SHX3
select GENERIC_CLOCKEVENTS_BROADCAST if SMP
- select ARCH_REQUIRE_GPIOLIB
+ select GPIOLIB
select PINCTRL
# SH4AL-DSP Processor Support
@@ -513,7 +505,6 @@
select ARCH_SPARSEMEM_ENABLE
select SYS_SUPPORTS_NUMA
select SYS_SUPPORTS_SH_CMT
- select ARCH_WANT_OPTIONAL_GPIOLIB
select PINCTRL
config CPU_SUBTYPE_SH7366
diff --git a/arch/sh/boards/Kconfig b/arch/sh/boards/Kconfig
index 5e52d53..e0db046 100644
--- a/arch/sh/boards/Kconfig
+++ b/arch/sh/boards/Kconfig
@@ -70,7 +70,7 @@
bool "SolutionEngine7724"
select SOLUTION_ENGINE
depends on CPU_SUBTYPE_SH7724
- select ARCH_REQUIRE_GPIOLIB
+ select GPIOLIB
select SND_SOC_AK4642 if SND_SIMPLE_CARD
select REGULATOR_FIXED_VOLTAGE if REGULATOR
help
@@ -174,7 +174,6 @@
depends on CPU_SUBTYPE_SH7786
select SYS_SUPPORTS_PCI
select NO_IOPORT_MAP if !PCI
- select ARCH_WANT_OPTIONAL_GPIOLIB
select HAVE_SRAM_POOL
select REGULATOR_FIXED_VOLTAGE if REGULATOR
help
@@ -190,7 +189,7 @@
config SH_SH7757LCR
bool "SH7757LCR"
depends on CPU_SUBTYPE_SH7757
- select ARCH_REQUIRE_GPIOLIB
+ select GPIOLIB
select REGULATOR_FIXED_VOLTAGE if REGULATOR
config SH_SH7785LCR
@@ -217,14 +216,14 @@
config SH_URQUELL
bool "Urquell"
depends on CPU_SUBTYPE_SH7786
- select ARCH_REQUIRE_GPIOLIB
+ select GPIOLIB
select SYS_SUPPORTS_PCI
select NO_IOPORT_MAP if !PCI
config SH_MIGOR
bool "Migo-R"
depends on CPU_SUBTYPE_SH7722
- select ARCH_REQUIRE_GPIOLIB
+ select GPIOLIB
select REGULATOR_FIXED_VOLTAGE if REGULATOR
help
Select Migo-R if configuring for the SH7722 Migo-R platform
@@ -233,7 +232,7 @@
config SH_AP325RXA
bool "AP-325RXA"
depends on CPU_SUBTYPE_SH7723
- select ARCH_REQUIRE_GPIOLIB
+ select GPIOLIB
select REGULATOR_FIXED_VOLTAGE if REGULATOR
help
Renesas "AP-325RXA" support.
@@ -242,7 +241,7 @@
config SH_KFR2R09
bool "KFR2R09"
depends on CPU_SUBTYPE_SH7724
- select ARCH_REQUIRE_GPIOLIB
+ select GPIOLIB
select REGULATOR_FIXED_VOLTAGE if REGULATOR
help
"Kit For R2R for 2009" support.
@@ -250,7 +249,7 @@
config SH_ECOVEC
bool "EcoVec"
depends on CPU_SUBTYPE_SH7724
- select ARCH_REQUIRE_GPIOLIB
+ select GPIOLIB
select SND_SOC_DA7210 if SND_SIMPLE_CARD
select REGULATOR_FIXED_VOLTAGE if REGULATOR
help
@@ -327,7 +326,7 @@
config SH_MAGIC_PANEL_R2
bool "Magic Panel R2"
depends on CPU_SUBTYPE_SH7720
- select ARCH_REQUIRE_GPIOLIB
+ select GPIOLIB
select REGULATOR_FIXED_VOLTAGE if REGULATOR
help
Select Magic Panel R2 if configuring for Magic Panel R2.
diff --git a/arch/sh/boards/mach-highlander/Kconfig b/arch/sh/boards/mach-highlander/Kconfig
index def49cc..42f5589 100644
--- a/arch/sh/boards/mach-highlander/Kconfig
+++ b/arch/sh/boards/mach-highlander/Kconfig
@@ -18,7 +18,7 @@
config SH_R7785RP
bool "R7785RP board support"
depends on CPU_SUBTYPE_SH7785
- select ARCH_REQUIRE_GPIOLIB
+ select GPIOLIB
endchoice
diff --git a/arch/sh/boards/mach-rsk/Kconfig b/arch/sh/boards/mach-rsk/Kconfig
index 458a11f..0b9b2c4 100644
--- a/arch/sh/boards/mach-rsk/Kconfig
+++ b/arch/sh/boards/mach-rsk/Kconfig
@@ -10,17 +10,17 @@
config SH_RSK7203
bool "RSK7203"
- select ARCH_REQUIRE_GPIOLIB
+ select GPIOLIB
depends on CPU_SUBTYPE_SH7203
config SH_RSK7264
bool "RSK2+SH7264"
- select ARCH_REQUIRE_GPIOLIB
+ select GPIOLIB
depends on CPU_SUBTYPE_SH7264
config SH_RSK7269
bool "RSK2+SH7269"
- select ARCH_REQUIRE_GPIOLIB
+ select GPIOLIB
depends on CPU_SUBTYPE_SH7269
endchoice