| /* |
| * This program is free software; you can redistribute it and/or modify it |
| * under the terms of the GNU General Public License version 2 as published |
| * by the Free Software Foundation. |
| * |
| * Parts of this file are based on Ralink's 2.6.21 BSP |
| * |
| * Copyright (C) 2008-2011 Gabor Juhos <juhosg@openwrt.org> |
| * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org> |
| * Copyright (C) 2013 John Crispin <blogic@openwrt.org> |
| */ |
| |
| #include <linux/kernel.h> |
| #include <linux/init.h> |
| #include <linux/module.h> |
| |
| #include <asm/mipsregs.h> |
| #include <asm/mach-ralink/ralink_regs.h> |
| #include <asm/mach-ralink/mt7620.h> |
| #include <asm/mach-ralink/pinmux.h> |
| |
| #include "common.h" |
| |
| /* analog */ |
| #define PMU0_CFG 0x88 |
| #define PMU_SW_SET BIT(28) |
| #define A_DCDC_EN BIT(24) |
| #define A_SSC_PERI BIT(19) |
| #define A_SSC_GEN BIT(18) |
| #define A_SSC_M 0x3 |
| #define A_SSC_S 16 |
| #define A_DLY_M 0x7 |
| #define A_DLY_S 8 |
| #define A_VTUNE_M 0xff |
| |
| /* digital */ |
| #define PMU1_CFG 0x8C |
| #define DIG_SW_SEL BIT(25) |
| |
| /* is this a MT7620 or a MT7628 */ |
| enum mt762x_soc_type mt762x_soc; |
| |
| /* does the board have sdram or ddram */ |
| static int dram_type; |
| |
| static struct rt2880_pmx_func i2c_grp[] = { FUNC("i2c", 0, 1, 2) }; |
| static struct rt2880_pmx_func spi_grp[] = { FUNC("spi", 0, 3, 4) }; |
| static struct rt2880_pmx_func uartlite_grp[] = { FUNC("uartlite", 0, 15, 2) }; |
| static struct rt2880_pmx_func mdio_grp[] = { FUNC("mdio", 0, 22, 2) }; |
| static struct rt2880_pmx_func rgmii1_grp[] = { FUNC("rgmii1", 0, 24, 12) }; |
| static struct rt2880_pmx_func refclk_grp[] = { FUNC("spi refclk", 0, 37, 3) }; |
| static struct rt2880_pmx_func ephy_grp[] = { FUNC("ephy", 0, 40, 5) }; |
| static struct rt2880_pmx_func rgmii2_grp[] = { FUNC("rgmii2", 0, 60, 12) }; |
| static struct rt2880_pmx_func wled_grp[] = { FUNC("wled", 0, 72, 1) }; |
| static struct rt2880_pmx_func pa_grp[] = { FUNC("pa", 0, 18, 4) }; |
| static struct rt2880_pmx_func uartf_grp[] = { |
| FUNC("uartf", MT7620_GPIO_MODE_UARTF, 7, 8), |
| FUNC("pcm uartf", MT7620_GPIO_MODE_PCM_UARTF, 7, 8), |
| FUNC("pcm i2s", MT7620_GPIO_MODE_PCM_I2S, 7, 8), |
| FUNC("i2s uartf", MT7620_GPIO_MODE_I2S_UARTF, 7, 8), |
| FUNC("pcm gpio", MT7620_GPIO_MODE_PCM_GPIO, 11, 4), |
| FUNC("gpio uartf", MT7620_GPIO_MODE_GPIO_UARTF, 7, 4), |
| FUNC("gpio i2s", MT7620_GPIO_MODE_GPIO_I2S, 7, 4), |
| }; |
| static struct rt2880_pmx_func wdt_grp[] = { |
| FUNC("wdt rst", 0, 17, 1), |
| FUNC("wdt refclk", 0, 17, 1), |
| }; |
| static struct rt2880_pmx_func pcie_rst_grp[] = { |
| FUNC("pcie rst", MT7620_GPIO_MODE_PCIE_RST, 36, 1), |
| FUNC("pcie refclk", MT7620_GPIO_MODE_PCIE_REF, 36, 1) |
| }; |
| static struct rt2880_pmx_func nd_sd_grp[] = { |
| FUNC("nand", MT7620_GPIO_MODE_NAND, 45, 15), |
| FUNC("sd", MT7620_GPIO_MODE_SD, 45, 15) |
| }; |
| |
| static struct rt2880_pmx_group mt7620a_pinmux_data[] = { |
| GRP("i2c", i2c_grp, 1, MT7620_GPIO_MODE_I2C), |
| GRP("uartf", uartf_grp, MT7620_GPIO_MODE_UART0_MASK, |
| MT7620_GPIO_MODE_UART0_SHIFT), |
| GRP("spi", spi_grp, 1, MT7620_GPIO_MODE_SPI), |
| GRP("uartlite", uartlite_grp, 1, MT7620_GPIO_MODE_UART1), |
| GRP_G("wdt", wdt_grp, MT7620_GPIO_MODE_WDT_MASK, |
| MT7620_GPIO_MODE_WDT_GPIO, MT7620_GPIO_MODE_WDT_SHIFT), |
| GRP("mdio", mdio_grp, 1, MT7620_GPIO_MODE_MDIO), |
| GRP("rgmii1", rgmii1_grp, 1, MT7620_GPIO_MODE_RGMII1), |
| GRP("spi refclk", refclk_grp, 1, MT7620_GPIO_MODE_SPI_REF_CLK), |
| GRP_G("pcie", pcie_rst_grp, MT7620_GPIO_MODE_PCIE_MASK, |
| MT7620_GPIO_MODE_PCIE_GPIO, MT7620_GPIO_MODE_PCIE_SHIFT), |
| GRP_G("nd_sd", nd_sd_grp, MT7620_GPIO_MODE_ND_SD_MASK, |
| MT7620_GPIO_MODE_ND_SD_GPIO, MT7620_GPIO_MODE_ND_SD_SHIFT), |
| GRP("rgmii2", rgmii2_grp, 1, MT7620_GPIO_MODE_RGMII2), |
| GRP("wled", wled_grp, 1, MT7620_GPIO_MODE_WLED), |
| GRP("ephy", ephy_grp, 1, MT7620_GPIO_MODE_EPHY), |
| GRP("pa", pa_grp, 1, MT7620_GPIO_MODE_PA), |
| { 0 } |
| }; |
| |
| static struct rt2880_pmx_func pwm1_grp_mt7628[] = { |
| FUNC("sdcx", 3, 19, 1), |
| FUNC("utif", 2, 19, 1), |
| FUNC("gpio", 1, 19, 1), |
| FUNC("pwm", 0, 19, 1), |
| }; |
| |
| static struct rt2880_pmx_func pwm0_grp_mt7628[] = { |
| FUNC("sdcx", 3, 18, 1), |
| FUNC("utif", 2, 18, 1), |
| FUNC("gpio", 1, 18, 1), |
| FUNC("pwm", 0, 18, 1), |
| }; |
| |
| static struct rt2880_pmx_func uart2_grp_mt7628[] = { |
| FUNC("sdcx", 3, 20, 2), |
| FUNC("pwm", 2, 20, 2), |
| FUNC("gpio", 1, 20, 2), |
| FUNC("uart", 0, 20, 2), |
| }; |
| |
| static struct rt2880_pmx_func uart1_grp_mt7628[] = { |
| FUNC("sdcx", 3, 45, 2), |
| FUNC("pwm", 2, 45, 2), |
| FUNC("gpio", 1, 45, 2), |
| FUNC("uart", 0, 45, 2), |
| }; |
| |
| static struct rt2880_pmx_func i2c_grp_mt7628[] = { |
| FUNC("-", 3, 4, 2), |
| FUNC("debug", 2, 4, 2), |
| FUNC("gpio", 1, 4, 2), |
| FUNC("i2c", 0, 4, 2), |
| }; |
| |
| static struct rt2880_pmx_func refclk_grp_mt7628[] = { FUNC("reclk", 0, 36, 1) }; |
| static struct rt2880_pmx_func perst_grp_mt7628[] = { FUNC("perst", 0, 37, 1) }; |
| static struct rt2880_pmx_func wdt_grp_mt7628[] = { FUNC("wdt", 0, 15, 38) }; |
| static struct rt2880_pmx_func spi_grp_mt7628[] = { FUNC("spi", 0, 7, 4) }; |
| |
| static struct rt2880_pmx_func sd_mode_grp_mt7628[] = { |
| FUNC("jtag", 3, 22, 8), |
| FUNC("utif", 2, 22, 8), |
| FUNC("gpio", 1, 22, 8), |
| FUNC("sdcx", 0, 22, 8), |
| }; |
| |
| static struct rt2880_pmx_func uart0_grp_mt7628[] = { |
| FUNC("-", 3, 12, 2), |
| FUNC("-", 2, 12, 2), |
| FUNC("gpio", 1, 12, 2), |
| FUNC("uart", 0, 12, 2), |
| }; |
| |
| static struct rt2880_pmx_func i2s_grp_mt7628[] = { |
| FUNC("antenna", 3, 0, 4), |
| FUNC("pcm", 2, 0, 4), |
| FUNC("gpio", 1, 0, 4), |
| FUNC("i2s", 0, 0, 4), |
| }; |
| |
| static struct rt2880_pmx_func spi_cs1_grp_mt7628[] = { |
| FUNC("-", 3, 6, 1), |
| FUNC("refclk", 2, 6, 1), |
| FUNC("gpio", 1, 6, 1), |
| FUNC("spi", 0, 6, 1), |
| }; |
| |
| static struct rt2880_pmx_func spis_grp_mt7628[] = { |
| FUNC("pwm", 3, 14, 4), |
| FUNC("util", 2, 14, 4), |
| FUNC("gpio", 1, 14, 4), |
| FUNC("spis", 0, 14, 4), |
| }; |
| |
| static struct rt2880_pmx_func gpio_grp_mt7628[] = { |
| FUNC("pcie", 3, 11, 1), |
| FUNC("refclk", 2, 11, 1), |
| FUNC("gpio", 1, 11, 1), |
| FUNC("gpio", 0, 11, 1), |
| }; |
| |
| #define MT7628_GPIO_MODE_MASK 0x3 |
| |
| #define MT7628_GPIO_MODE_PWM1 30 |
| #define MT7628_GPIO_MODE_PWM0 28 |
| #define MT7628_GPIO_MODE_UART2 26 |
| #define MT7628_GPIO_MODE_UART1 24 |
| #define MT7628_GPIO_MODE_I2C 20 |
| #define MT7628_GPIO_MODE_REFCLK 18 |
| #define MT7628_GPIO_MODE_PERST 16 |
| #define MT7628_GPIO_MODE_WDT 14 |
| #define MT7628_GPIO_MODE_SPI 12 |
| #define MT7628_GPIO_MODE_SDMODE 10 |
| #define MT7628_GPIO_MODE_UART0 8 |
| #define MT7628_GPIO_MODE_I2S 6 |
| #define MT7628_GPIO_MODE_CS1 4 |
| #define MT7628_GPIO_MODE_SPIS 2 |
| #define MT7628_GPIO_MODE_GPIO 0 |
| |
| static struct rt2880_pmx_group mt7628an_pinmux_data[] = { |
| GRP_G("pmw1", pwm1_grp_mt7628, MT7628_GPIO_MODE_MASK, |
| 1, MT7628_GPIO_MODE_PWM1), |
| GRP_G("pmw1", pwm0_grp_mt7628, MT7628_GPIO_MODE_MASK, |
| 1, MT7628_GPIO_MODE_PWM0), |
| GRP_G("uart2", uart2_grp_mt7628, MT7628_GPIO_MODE_MASK, |
| 1, MT7628_GPIO_MODE_UART2), |
| GRP_G("uart1", uart1_grp_mt7628, MT7628_GPIO_MODE_MASK, |
| 1, MT7628_GPIO_MODE_UART1), |
| GRP_G("i2c", i2c_grp_mt7628, MT7628_GPIO_MODE_MASK, |
| 1, MT7628_GPIO_MODE_I2C), |
| GRP("refclk", refclk_grp_mt7628, 1, MT7628_GPIO_MODE_REFCLK), |
| GRP("perst", perst_grp_mt7628, 1, MT7628_GPIO_MODE_PERST), |
| GRP("wdt", wdt_grp_mt7628, 1, MT7628_GPIO_MODE_WDT), |
| GRP("spi", spi_grp_mt7628, 1, MT7628_GPIO_MODE_SPI), |
| GRP_G("sdmode", sd_mode_grp_mt7628, MT7628_GPIO_MODE_MASK, |
| 1, MT7628_GPIO_MODE_SDMODE), |
| GRP_G("uart0", uart0_grp_mt7628, MT7628_GPIO_MODE_MASK, |
| 1, MT7628_GPIO_MODE_UART0), |
| GRP_G("i2s", i2s_grp_mt7628, MT7628_GPIO_MODE_MASK, |
| 1, MT7628_GPIO_MODE_I2S), |
| GRP_G("spi cs1", spi_cs1_grp_mt7628, MT7628_GPIO_MODE_MASK, |
| 1, MT7628_GPIO_MODE_CS1), |
| GRP_G("spis", spis_grp_mt7628, MT7628_GPIO_MODE_MASK, |
| 1, MT7628_GPIO_MODE_SPIS), |
| GRP_G("gpio", gpio_grp_mt7628, MT7628_GPIO_MODE_MASK, |
| 1, MT7628_GPIO_MODE_GPIO), |
| { 0 } |
| }; |
| |
| static __init u32 |
| mt7620_calc_rate(u32 ref_rate, u32 mul, u32 div) |
| { |
| u64 t; |
| |
| t = ref_rate; |
| t *= mul; |
| do_div(t, div); |
| |
| return t; |
| } |
| |
| #define MHZ(x) ((x) * 1000 * 1000) |
| |
| static __init unsigned long |
| mt7620_get_xtal_rate(void) |
| { |
| u32 reg; |
| |
| reg = rt_sysc_r32(SYSC_REG_SYSTEM_CONFIG0); |
| if (reg & SYSCFG0_XTAL_FREQ_SEL) |
| return MHZ(40); |
| |
| return MHZ(20); |
| } |
| |
| static __init unsigned long |
| mt7620_get_periph_rate(unsigned long xtal_rate) |
| { |
| u32 reg; |
| |
| reg = rt_sysc_r32(SYSC_REG_CLKCFG0); |
| if (reg & CLKCFG0_PERI_CLK_SEL) |
| return xtal_rate; |
| |
| return MHZ(40); |
| } |
| |
| static const u32 mt7620_clk_divider[] __initconst = { 2, 3, 4, 8 }; |
| |
| static __init unsigned long |
| mt7620_get_cpu_pll_rate(unsigned long xtal_rate) |
| { |
| u32 reg; |
| u32 mul; |
| u32 div; |
| |
| reg = rt_sysc_r32(SYSC_REG_CPLL_CONFIG0); |
| if (reg & CPLL_CFG0_BYPASS_REF_CLK) |
| return xtal_rate; |
| |
| if ((reg & CPLL_CFG0_SW_CFG) == 0) |
| return MHZ(600); |
| |
| mul = (reg >> CPLL_CFG0_PLL_MULT_RATIO_SHIFT) & |
| CPLL_CFG0_PLL_MULT_RATIO_MASK; |
| mul += 24; |
| if (reg & CPLL_CFG0_LC_CURFCK) |
| mul *= 2; |
| |
| div = (reg >> CPLL_CFG0_PLL_DIV_RATIO_SHIFT) & |
| CPLL_CFG0_PLL_DIV_RATIO_MASK; |
| |
| WARN_ON(div >= ARRAY_SIZE(mt7620_clk_divider)); |
| |
| return mt7620_calc_rate(xtal_rate, mul, mt7620_clk_divider[div]); |
| } |
| |
| static __init unsigned long |
| mt7620_get_pll_rate(unsigned long xtal_rate, unsigned long cpu_pll_rate) |
| { |
| u32 reg; |
| |
| reg = rt_sysc_r32(SYSC_REG_CPLL_CONFIG1); |
| if (reg & CPLL_CFG1_CPU_AUX1) |
| return xtal_rate; |
| |
| if (reg & CPLL_CFG1_CPU_AUX0) |
| return MHZ(480); |
| |
| return cpu_pll_rate; |
| } |
| |
| static __init unsigned long |
| mt7620_get_cpu_rate(unsigned long pll_rate) |
| { |
| u32 reg; |
| u32 mul; |
| u32 div; |
| |
| reg = rt_sysc_r32(SYSC_REG_CPU_SYS_CLKCFG); |
| |
| mul = reg & CPU_SYS_CLKCFG_CPU_FFRAC_MASK; |
| div = (reg >> CPU_SYS_CLKCFG_CPU_FDIV_SHIFT) & |
| CPU_SYS_CLKCFG_CPU_FDIV_MASK; |
| |
| return mt7620_calc_rate(pll_rate, mul, div); |
| } |
| |
| static const u32 mt7620_ocp_dividers[16] __initconst = { |
| [CPU_SYS_CLKCFG_OCP_RATIO_2] = 2, |
| [CPU_SYS_CLKCFG_OCP_RATIO_3] = 3, |
| [CPU_SYS_CLKCFG_OCP_RATIO_4] = 4, |
| [CPU_SYS_CLKCFG_OCP_RATIO_5] = 5, |
| [CPU_SYS_CLKCFG_OCP_RATIO_10] = 10, |
| }; |
| |
| static __init unsigned long |
| mt7620_get_dram_rate(unsigned long pll_rate) |
| { |
| if (dram_type == SYSCFG0_DRAM_TYPE_SDRAM) |
| return pll_rate / 4; |
| |
| return pll_rate / 3; |
| } |
| |
| static __init unsigned long |
| mt7620_get_sys_rate(unsigned long cpu_rate) |
| { |
| u32 reg; |
| u32 ocp_ratio; |
| u32 div; |
| |
| reg = rt_sysc_r32(SYSC_REG_CPU_SYS_CLKCFG); |
| |
| ocp_ratio = (reg >> CPU_SYS_CLKCFG_OCP_RATIO_SHIFT) & |
| CPU_SYS_CLKCFG_OCP_RATIO_MASK; |
| |
| if (WARN_ON(ocp_ratio >= ARRAY_SIZE(mt7620_ocp_dividers))) |
| return cpu_rate; |
| |
| div = mt7620_ocp_dividers[ocp_ratio]; |
| if (WARN(!div, "invalid divider for OCP ratio %u", ocp_ratio)) |
| return cpu_rate; |
| |
| return cpu_rate / div; |
| } |
| |
| void __init ralink_clk_init(void) |
| { |
| unsigned long xtal_rate; |
| unsigned long cpu_pll_rate; |
| unsigned long pll_rate; |
| unsigned long cpu_rate; |
| unsigned long sys_rate; |
| unsigned long dram_rate; |
| unsigned long periph_rate; |
| |
| xtal_rate = mt7620_get_xtal_rate(); |
| |
| #define RFMT(label) label ":%lu.%03luMHz " |
| #define RINT(x) ((x) / 1000000) |
| #define RFRAC(x) (((x) / 1000) % 1000) |
| |
| if (mt762x_soc == MT762X_SOC_MT7628AN) { |
| if (xtal_rate == MHZ(40)) |
| cpu_rate = MHZ(580); |
| else |
| cpu_rate = MHZ(575); |
| dram_rate = sys_rate = cpu_rate / 3; |
| periph_rate = MHZ(40); |
| |
| ralink_clk_add("10000d00.uartlite", periph_rate); |
| ralink_clk_add("10000e00.uartlite", periph_rate); |
| } else { |
| cpu_pll_rate = mt7620_get_cpu_pll_rate(xtal_rate); |
| pll_rate = mt7620_get_pll_rate(xtal_rate, cpu_pll_rate); |
| |
| cpu_rate = mt7620_get_cpu_rate(pll_rate); |
| dram_rate = mt7620_get_dram_rate(pll_rate); |
| sys_rate = mt7620_get_sys_rate(cpu_rate); |
| periph_rate = mt7620_get_periph_rate(xtal_rate); |
| |
| pr_debug(RFMT("XTAL") RFMT("CPU_PLL") RFMT("PLL"), |
| RINT(xtal_rate), RFRAC(xtal_rate), |
| RINT(cpu_pll_rate), RFRAC(cpu_pll_rate), |
| RINT(pll_rate), RFRAC(pll_rate)); |
| |
| ralink_clk_add("10000500.uart", periph_rate); |
| } |
| |
| pr_debug(RFMT("CPU") RFMT("DRAM") RFMT("SYS") RFMT("PERIPH"), |
| RINT(cpu_rate), RFRAC(cpu_rate), |
| RINT(dram_rate), RFRAC(dram_rate), |
| RINT(sys_rate), RFRAC(sys_rate), |
| RINT(periph_rate), RFRAC(periph_rate)); |
| #undef RFRAC |
| #undef RINT |
| #undef RFMT |
| |
| ralink_clk_add("cpu", cpu_rate); |
| ralink_clk_add("10000100.timer", periph_rate); |
| ralink_clk_add("10000120.watchdog", periph_rate); |
| ralink_clk_add("10000b00.spi", sys_rate); |
| ralink_clk_add("10000c00.uartlite", periph_rate); |
| ralink_clk_add("10180000.wmac", xtal_rate); |
| } |
| |
| void __init ralink_of_remap(void) |
| { |
| rt_sysc_membase = plat_of_remap_node("ralink,mt7620a-sysc"); |
| rt_memc_membase = plat_of_remap_node("ralink,mt7620a-memc"); |
| |
| if (!rt_sysc_membase || !rt_memc_membase) |
| panic("Failed to remap core resources"); |
| } |
| |
| static __init void |
| mt7620_dram_init(struct ralink_soc_info *soc_info) |
| { |
| switch (dram_type) { |
| case SYSCFG0_DRAM_TYPE_SDRAM: |
| pr_info("Board has SDRAM\n"); |
| soc_info->mem_size_min = MT7620_SDRAM_SIZE_MIN; |
| soc_info->mem_size_max = MT7620_SDRAM_SIZE_MAX; |
| break; |
| |
| case SYSCFG0_DRAM_TYPE_DDR1: |
| pr_info("Board has DDR1\n"); |
| soc_info->mem_size_min = MT7620_DDR1_SIZE_MIN; |
| soc_info->mem_size_max = MT7620_DDR1_SIZE_MAX; |
| break; |
| |
| case SYSCFG0_DRAM_TYPE_DDR2: |
| pr_info("Board has DDR2\n"); |
| soc_info->mem_size_min = MT7620_DDR2_SIZE_MIN; |
| soc_info->mem_size_max = MT7620_DDR2_SIZE_MAX; |
| break; |
| default: |
| BUG(); |
| } |
| } |
| |
| static __init void |
| mt7628_dram_init(struct ralink_soc_info *soc_info) |
| { |
| switch (dram_type) { |
| case SYSCFG0_DRAM_TYPE_DDR1_MT7628: |
| pr_info("Board has DDR1\n"); |
| soc_info->mem_size_min = MT7620_DDR1_SIZE_MIN; |
| soc_info->mem_size_max = MT7620_DDR1_SIZE_MAX; |
| break; |
| |
| case SYSCFG0_DRAM_TYPE_DDR2_MT7628: |
| pr_info("Board has DDR2\n"); |
| soc_info->mem_size_min = MT7620_DDR2_SIZE_MIN; |
| soc_info->mem_size_max = MT7620_DDR2_SIZE_MAX; |
| break; |
| default: |
| BUG(); |
| } |
| } |
| |
| void prom_soc_init(struct ralink_soc_info *soc_info) |
| { |
| void __iomem *sysc = (void __iomem *) KSEG1ADDR(MT7620_SYSC_BASE); |
| unsigned char *name = NULL; |
| u32 n0; |
| u32 n1; |
| u32 rev; |
| u32 cfg0; |
| u32 pmu0; |
| u32 pmu1; |
| u32 bga; |
| |
| n0 = __raw_readl(sysc + SYSC_REG_CHIP_NAME0); |
| n1 = __raw_readl(sysc + SYSC_REG_CHIP_NAME1); |
| rev = __raw_readl(sysc + SYSC_REG_CHIP_REV); |
| bga = (rev >> CHIP_REV_PKG_SHIFT) & CHIP_REV_PKG_MASK; |
| |
| if (n0 == MT7620_CHIP_NAME0 && n1 == MT7620_CHIP_NAME1) { |
| if (bga) { |
| mt762x_soc = MT762X_SOC_MT7620A; |
| name = "MT7620A"; |
| soc_info->compatible = "ralink,mt7620a-soc"; |
| } else { |
| mt762x_soc = MT762X_SOC_MT7620N; |
| name = "MT7620N"; |
| soc_info->compatible = "ralink,mt7620n-soc"; |
| #ifdef CONFIG_PCI |
| panic("mt7620n is only supported for non pci kernels"); |
| #endif |
| } |
| } else if (n0 == MT7620_CHIP_NAME0 && n1 == MT7628_CHIP_NAME1) { |
| mt762x_soc = MT762X_SOC_MT7628AN; |
| name = "MT7628AN"; |
| soc_info->compatible = "ralink,mt7628an-soc"; |
| } else { |
| panic("mt762x: unknown SoC, n0:%08x n1:%08x\n", n0, n1); |
| } |
| |
| snprintf(soc_info->sys_type, RAMIPS_SYS_TYPE_LEN, |
| "Ralink %s ver:%u eco:%u", |
| name, |
| (rev >> CHIP_REV_VER_SHIFT) & CHIP_REV_VER_MASK, |
| (rev & CHIP_REV_ECO_MASK)); |
| |
| cfg0 = __raw_readl(sysc + SYSC_REG_SYSTEM_CONFIG0); |
| dram_type = (cfg0 >> SYSCFG0_DRAM_TYPE_SHIFT) & SYSCFG0_DRAM_TYPE_MASK; |
| |
| soc_info->mem_base = MT7620_DRAM_BASE; |
| if (mt762x_soc == MT762X_SOC_MT7628AN) |
| mt7628_dram_init(soc_info); |
| else |
| mt7620_dram_init(soc_info); |
| |
| pmu0 = __raw_readl(sysc + PMU0_CFG); |
| pmu1 = __raw_readl(sysc + PMU1_CFG); |
| |
| pr_info("Analog PMU set to %s control\n", |
| (pmu0 & PMU_SW_SET) ? ("sw") : ("hw")); |
| pr_info("Digital PMU set to %s control\n", |
| (pmu1 & DIG_SW_SEL) ? ("sw") : ("hw")); |
| |
| if (mt762x_soc == MT762X_SOC_MT7628AN) |
| rt2880_pinmux_data = mt7628an_pinmux_data; |
| else |
| rt2880_pinmux_data = mt7620a_pinmux_data; |
| } |