drivers/rtc/: use bcd2bin/bin2bcd
Change drivers/rtc/ to use the new bcd2bin/bin2bcd functions instead of
the obsolete BCD_TO_BIN/BIN_TO_BCD/BCD2BIN/BIN2BCD macros.
Signed-off-by: Adrian Bunk <bunk@kernel.org>
Acked-by: Alessandro Zummo <a.zummo@towertech.it>
Cc: David Brownell <david-b@pacbell.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
diff --git a/drivers/rtc/rtc-max6902.c b/drivers/rtc/rtc-max6902.c
index 78b2551..2f6507d 100644
--- a/drivers/rtc/rtc-max6902.c
+++ b/drivers/rtc/rtc-max6902.c
@@ -124,15 +124,15 @@
/* The chip sends data in this order:
* Seconds, Minutes, Hours, Date, Month, Day, Year */
- dt->tm_sec = BCD2BIN(chip->buf[1]);
- dt->tm_min = BCD2BIN(chip->buf[2]);
- dt->tm_hour = BCD2BIN(chip->buf[3]);
- dt->tm_mday = BCD2BIN(chip->buf[4]);
- dt->tm_mon = BCD2BIN(chip->buf[5]) - 1;
- dt->tm_wday = BCD2BIN(chip->buf[6]);
- dt->tm_year = BCD2BIN(chip->buf[7]);
+ dt->tm_sec = bcd2bin(chip->buf[1]);
+ dt->tm_min = bcd2bin(chip->buf[2]);
+ dt->tm_hour = bcd2bin(chip->buf[3]);
+ dt->tm_mday = bcd2bin(chip->buf[4]);
+ dt->tm_mon = bcd2bin(chip->buf[5]) - 1;
+ dt->tm_wday = bcd2bin(chip->buf[6]);
+ dt->tm_year = bcd2bin(chip->buf[7]);
- century = BCD2BIN(tmp) * 100;
+ century = bcd2bin(tmp) * 100;
dt->tm_year += century;
dt->tm_year -= 1900;
@@ -168,15 +168,15 @@
/* Remove write protection */
max6902_set_reg(dev, 0xF, 0);
- max6902_set_reg(dev, 0x01, BIN2BCD(dt->tm_sec));
- max6902_set_reg(dev, 0x03, BIN2BCD(dt->tm_min));
- max6902_set_reg(dev, 0x05, BIN2BCD(dt->tm_hour));
+ max6902_set_reg(dev, 0x01, bin2bcd(dt->tm_sec));
+ max6902_set_reg(dev, 0x03, bin2bcd(dt->tm_min));
+ max6902_set_reg(dev, 0x05, bin2bcd(dt->tm_hour));
- max6902_set_reg(dev, 0x07, BIN2BCD(dt->tm_mday));
- max6902_set_reg(dev, 0x09, BIN2BCD(dt->tm_mon+1));
- max6902_set_reg(dev, 0x0B, BIN2BCD(dt->tm_wday));
- max6902_set_reg(dev, 0x0D, BIN2BCD(dt->tm_year%100));
- max6902_set_reg(dev, 0x13, BIN2BCD(dt->tm_year/100));
+ max6902_set_reg(dev, 0x07, bin2bcd(dt->tm_mday));
+ max6902_set_reg(dev, 0x09, bin2bcd(dt->tm_mon+1));
+ max6902_set_reg(dev, 0x0B, bin2bcd(dt->tm_wday));
+ max6902_set_reg(dev, 0x0D, bin2bcd(dt->tm_year%100));
+ max6902_set_reg(dev, 0x13, bin2bcd(dt->tm_year/100));
/* Compulab used a delay here. However, the datasheet
* does not mention a delay being required anywhere... */