powerpc: Change u64/s64 to a long long integer type
Convert arch/powerpc/ over to long long based u64:
-#ifdef __powerpc64__
-# include <asm-generic/int-l64.h>
-#else
-# include <asm-generic/int-ll64.h>
-#endif
+#include <asm-generic/int-ll64.h>
This will avoid reoccuring spurious warnings in core kernel code that
comes when people test on their own hardware. (i.e. x86 in ~98% of the
cases) This is what x86 uses and it generally helps keep 64-bit code
32-bit clean too.
[Adjusted to not impact user mode (from paulus) - sfr]
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
diff --git a/drivers/net/pasemi_mac.c b/drivers/net/pasemi_mac.c
index 5b7a574..d0349e7 100644
--- a/drivers/net/pasemi_mac.c
+++ b/drivers/net/pasemi_mac.c
@@ -712,7 +712,7 @@
rcmdsta = read_dma_reg(PAS_DMA_RXINT_RCMDSTA(mac->dma_if));
ccmdsta = read_dma_reg(PAS_DMA_RXCHAN_CCMDSTA(chan->chno));
- printk(KERN_ERR "pasemi_mac: rx error. macrx %016lx, rx status %lx\n",
+ printk(KERN_ERR "pasemi_mac: rx error. macrx %016llx, rx status %llx\n",
macrx, *chan->status);
printk(KERN_ERR "pasemi_mac: rcmdsta %08x ccmdsta %08x\n",
@@ -730,8 +730,8 @@
cmdsta = read_dma_reg(PAS_DMA_TXCHAN_TCMDSTA(chan->chno));
- printk(KERN_ERR "pasemi_mac: tx error. mactx 0x%016lx, "\
- "tx status 0x%016lx\n", mactx, *chan->status);
+ printk(KERN_ERR "pasemi_mac: tx error. mactx 0x%016llx, "\
+ "tx status 0x%016llx\n", mactx, *chan->status);
printk(KERN_ERR "pasemi_mac: tcmdsta 0x%08x\n", cmdsta);
}
diff --git a/drivers/pcmcia/electra_cf.c b/drivers/pcmcia/electra_cf.c
index a34284b1..d187ba4 100644
--- a/drivers/pcmcia/electra_cf.c
+++ b/drivers/pcmcia/electra_cf.c
@@ -297,7 +297,7 @@
goto fail3;
}
- dev_info(device, "at mem 0x%lx io 0x%lx irq %d\n",
+ dev_info(device, "at mem 0x%lx io 0x%llx irq %d\n",
cf->mem_phys, io.start, cf->irq);
cf->active = 1;
diff --git a/drivers/scsi/ibmvscsi/ibmvscsi.c b/drivers/scsi/ibmvscsi/ibmvscsi.c
index 5c541f7..74d07d1 100644
--- a/drivers/scsi/ibmvscsi/ibmvscsi.c
+++ b/drivers/scsi/ibmvscsi/ibmvscsi.c
@@ -1061,7 +1061,7 @@
}
sdev_printk(KERN_INFO, cmd->device,
- "aborting command. lun 0x%lx, tag 0x%lx\n",
+ "aborting command. lun 0x%llx, tag 0x%llx\n",
(((u64) lun) << 48), (u64) found_evt);
wait_for_completion(&evt->comp);
@@ -1082,7 +1082,7 @@
if (rsp_rc) {
if (printk_ratelimit())
sdev_printk(KERN_WARNING, cmd->device,
- "abort code %d for task tag 0x%lx\n",
+ "abort code %d for task tag 0x%llx\n",
rsp_rc, tsk_mgmt->task_tag);
return FAILED;
}
@@ -1102,12 +1102,12 @@
if (found_evt == NULL) {
spin_unlock_irqrestore(hostdata->host->host_lock, flags);
- sdev_printk(KERN_INFO, cmd->device, "aborted task tag 0x%lx completed\n",
+ sdev_printk(KERN_INFO, cmd->device, "aborted task tag 0x%llx completed\n",
tsk_mgmt->task_tag);
return SUCCESS;
}
- sdev_printk(KERN_INFO, cmd->device, "successfully aborted task tag 0x%lx\n",
+ sdev_printk(KERN_INFO, cmd->device, "successfully aborted task tag 0x%llx\n",
tsk_mgmt->task_tag);
cmd->result = (DID_ABORT << 16);
@@ -1182,7 +1182,7 @@
return FAILED;
}
- sdev_printk(KERN_INFO, cmd->device, "resetting device. lun 0x%lx\n",
+ sdev_printk(KERN_INFO, cmd->device, "resetting device. lun 0x%llx\n",
(((u64) lun) << 48));
wait_for_completion(&evt->comp);
@@ -1203,7 +1203,7 @@
if (rsp_rc) {
if (printk_ratelimit())
sdev_printk(KERN_WARNING, cmd->device,
- "reset code %d for task tag 0x%lx\n",
+ "reset code %d for task tag 0x%llx\n",
rsp_rc, tsk_mgmt->task_tag);
return FAILED;
}