| /* |
| * tw9910 Video Driver |
| * |
| * Copyright (C) 2008 Renesas Solutions Corp. |
| * Kuninori Morimoto <morimoto.kuninori@renesas.com> |
| * |
| * Based on ov772x driver, |
| * |
| * Copyright (C) 2008 Kuninori Morimoto <morimoto.kuninori@renesas.com> |
| * Copyright 2006-7 Jonathan Corbet <corbet@lwn.net> |
| * Copyright (C) 2008 Magnus Damm |
| * Copyright (C) 2008, Guennadi Liakhovetski <kernel@pengutronix.de> |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License version 2 as |
| * published by the Free Software Foundation. |
| */ |
| |
| #include <linux/init.h> |
| #include <linux/module.h> |
| #include <linux/i2c.h> |
| #include <linux/slab.h> |
| #include <linux/kernel.h> |
| #include <linux/delay.h> |
| #include <linux/videodev2.h> |
| #include <media/v4l2-chip-ident.h> |
| #include <media/v4l2-subdev.h> |
| #include <media/soc_camera.h> |
| #include <media/tw9910.h> |
| |
| #define GET_ID(val) ((val & 0xF8) >> 3) |
| #define GET_ReV(val) (val & 0x07) |
| |
| /* |
| * register offset |
| */ |
| #define ID 0x00 /* Product ID Code Register */ |
| #define STATUS1 0x01 /* Chip Status Register I */ |
| #define INFORM 0x02 /* Input Format */ |
| #define OPFORM 0x03 /* Output Format Control Register */ |
| #define DLYCTR 0x04 /* Hysteresis and HSYNC Delay Control */ |
| #define OUTCTR1 0x05 /* Output Control I */ |
| #define ACNTL1 0x06 /* Analog Control Register 1 */ |
| #define CROP_HI 0x07 /* Cropping Register, High */ |
| #define VDELAY_LO 0x08 /* Vertical Delay Register, Low */ |
| #define VACTIVE_LO 0x09 /* Vertical Active Register, Low */ |
| #define HDELAY_LO 0x0A /* Horizontal Delay Register, Low */ |
| #define HACTIVE_LO 0x0B /* Horizontal Active Register, Low */ |
| #define CNTRL1 0x0C /* Control Register I */ |
| #define VSCALE_LO 0x0D /* Vertical Scaling Register, Low */ |
| #define SCALE_HI 0x0E /* Scaling Register, High */ |
| #define HSCALE_LO 0x0F /* Horizontal Scaling Register, Low */ |
| #define BRIGHT 0x10 /* BRIGHTNESS Control Register */ |
| #define CONTRAST 0x11 /* CONTRAST Control Register */ |
| #define SHARPNESS 0x12 /* SHARPNESS Control Register I */ |
| #define SAT_U 0x13 /* Chroma (U) Gain Register */ |
| #define SAT_V 0x14 /* Chroma (V) Gain Register */ |
| #define HUE 0x15 /* Hue Control Register */ |
| #define CORING1 0x17 |
| #define CORING2 0x18 /* Coring and IF compensation */ |
| #define VBICNTL 0x19 /* VBI Control Register */ |
| #define ACNTL2 0x1A /* Analog Control 2 */ |
| #define OUTCTR2 0x1B /* Output Control 2 */ |
| #define SDT 0x1C /* Standard Selection */ |
| #define SDTR 0x1D /* Standard Recognition */ |
| #define TEST 0x1F /* Test Control Register */ |
| #define CLMPG 0x20 /* Clamping Gain */ |
| #define IAGC 0x21 /* Individual AGC Gain */ |
| #define AGCGAIN 0x22 /* AGC Gain */ |
| #define PEAKWT 0x23 /* White Peak Threshold */ |
| #define CLMPL 0x24 /* Clamp level */ |
| #define SYNCT 0x25 /* Sync Amplitude */ |
| #define MISSCNT 0x26 /* Sync Miss Count Register */ |
| #define PCLAMP 0x27 /* Clamp Position Register */ |
| #define VCNTL1 0x28 /* Vertical Control I */ |
| #define VCNTL2 0x29 /* Vertical Control II */ |
| #define CKILL 0x2A /* Color Killer Level Control */ |
| #define COMB 0x2B /* Comb Filter Control */ |
| #define LDLY 0x2C /* Luma Delay and H Filter Control */ |
| #define MISC1 0x2D /* Miscellaneous Control I */ |
| #define LOOP 0x2E /* LOOP Control Register */ |
| #define MISC2 0x2F /* Miscellaneous Control II */ |
| #define MVSN 0x30 /* Macrovision Detection */ |
| #define STATUS2 0x31 /* Chip STATUS II */ |
| #define HFREF 0x32 /* H monitor */ |
| #define CLMD 0x33 /* CLAMP MODE */ |
| #define IDCNTL 0x34 /* ID Detection Control */ |
| #define CLCNTL1 0x35 /* Clamp Control I */ |
| #define ANAPLLCTL 0x4C |
| #define VBIMIN 0x4D |
| #define HSLOWCTL 0x4E |
| #define WSS3 0x4F |
| #define FILLDATA 0x50 |
| #define SDID 0x51 |
| #define DID 0x52 |
| #define WSS1 0x53 |
| #define WSS2 0x54 |
| #define VVBI 0x55 |
| #define LCTL6 0x56 |
| #define LCTL7 0x57 |
| #define LCTL8 0x58 |
| #define LCTL9 0x59 |
| #define LCTL10 0x5A |
| #define LCTL11 0x5B |
| #define LCTL12 0x5C |
| #define LCTL13 0x5D |
| #define LCTL14 0x5E |
| #define LCTL15 0x5F |
| #define LCTL16 0x60 |
| #define LCTL17 0x61 |
| #define LCTL18 0x62 |
| #define LCTL19 0x63 |
| #define LCTL20 0x64 |
| #define LCTL21 0x65 |
| #define LCTL22 0x66 |
| #define LCTL23 0x67 |
| #define LCTL24 0x68 |
| #define LCTL25 0x69 |
| #define LCTL26 0x6A |
| #define HSGEGIN 0x6B |
| #define HSEND 0x6C |
| #define OVSDLY 0x6D |
| #define OVSEND 0x6E |
| #define VBIDELAY 0x6F |
| |
| /* |
| * register detail |
| */ |
| |
| /* INFORM */ |
| #define FC27_ON 0x40 /* 1 : Input crystal clock frequency is 27MHz */ |
| #define FC27_FF 0x00 /* 0 : Square pixel mode. */ |
| /* Must use 24.54MHz for 60Hz field rate */ |
| /* source or 29.5MHz for 50Hz field rate */ |
| #define IFSEL_S 0x10 /* 01 : S-video decoding */ |
| #define IFSEL_C 0x00 /* 00 : Composite video decoding */ |
| /* Y input video selection */ |
| #define YSEL_M0 0x00 /* 00 : Mux0 selected */ |
| #define YSEL_M1 0x04 /* 01 : Mux1 selected */ |
| #define YSEL_M2 0x08 /* 10 : Mux2 selected */ |
| #define YSEL_M3 0x10 /* 11 : Mux3 selected */ |
| |
| /* OPFORM */ |
| #define MODE 0x80 /* 0 : CCIR601 compatible YCrCb 4:2:2 format */ |
| /* 1 : ITU-R-656 compatible data sequence format */ |
| #define LEN 0x40 /* 0 : 8-bit YCrCb 4:2:2 output format */ |
| /* 1 : 16-bit YCrCb 4:2:2 output format.*/ |
| #define LLCMODE 0x20 /* 1 : LLC output mode. */ |
| /* 0 : free-run output mode */ |
| #define AINC 0x10 /* Serial interface auto-indexing control */ |
| /* 0 : auto-increment */ |
| /* 1 : non-auto */ |
| #define VSCTL 0x08 /* 1 : Vertical out ctrl by DVALID */ |
| /* 0 : Vertical out ctrl by HACTIVE and DVALID */ |
| #define OEN 0x04 /* Output Enable together with TRI_SEL. */ |
| |
| /* OUTCTR1 */ |
| #define VSP_LO 0x00 /* 0 : VS pin output polarity is active low */ |
| #define VSP_HI 0x80 /* 1 : VS pin output polarity is active high. */ |
| /* VS pin output control */ |
| #define VSSL_VSYNC 0x00 /* 0 : VSYNC */ |
| #define VSSL_VACT 0x10 /* 1 : VACT */ |
| #define VSSL_FIELD 0x20 /* 2 : FIELD */ |
| #define VSSL_VVALID 0x30 /* 3 : VVALID */ |
| #define VSSL_ZERO 0x70 /* 7 : 0 */ |
| #define HSP_LOW 0x00 /* 0 : HS pin output polarity is active low */ |
| #define HSP_HI 0x08 /* 1 : HS pin output polarity is active high.*/ |
| /* HS pin output control */ |
| #define HSSL_HACT 0x00 /* 0 : HACT */ |
| #define HSSL_HSYNC 0x01 /* 1 : HSYNC */ |
| #define HSSL_DVALID 0x02 /* 2 : DVALID */ |
| #define HSSL_HLOCK 0x03 /* 3 : HLOCK */ |
| #define HSSL_ASYNCW 0x04 /* 4 : ASYNCW */ |
| #define HSSL_ZERO 0x07 /* 7 : 0 */ |
| |
| /* ACNTL1 */ |
| #define SRESET 0x80 /* resets the device to its default state |
| * but all register content remain unchanged. |
| * This bit is self-resetting. |
| */ |
| |
| /* VBICNTL */ |
| /* RTSEL : control the real time signal |
| * output from the MPOUT pin |
| */ |
| #define RTSEL_MASK 0x07 |
| #define RTSEL_VLOSS 0x00 /* 0000 = Video loss */ |
| #define RTSEL_HLOCK 0x01 /* 0001 = H-lock */ |
| #define RTSEL_SLOCK 0x02 /* 0010 = S-lock */ |
| #define RTSEL_VLOCK 0x03 /* 0011 = V-lock */ |
| #define RTSEL_MONO 0x04 /* 0100 = MONO */ |
| #define RTSEL_DET50 0x05 /* 0101 = DET50 */ |
| #define RTSEL_FIELD 0x06 /* 0110 = FIELD */ |
| #define RTSEL_RTCO 0x07 /* 0111 = RTCO ( Real Time Control ) */ |
| |
| /* |
| * structure |
| */ |
| |
| struct regval_list { |
| unsigned char reg_num; |
| unsigned char value; |
| }; |
| |
| struct tw9910_scale_ctrl { |
| char *name; |
| unsigned short width; |
| unsigned short height; |
| u16 hscale; |
| u16 vscale; |
| }; |
| |
| struct tw9910_cropping_ctrl { |
| u16 vdelay; |
| u16 vactive; |
| u16 hdelay; |
| u16 hactive; |
| }; |
| |
| struct tw9910_hsync_ctrl { |
| u16 start; |
| u16 end; |
| }; |
| |
| struct tw9910_priv { |
| struct v4l2_subdev subdev; |
| struct tw9910_video_info *info; |
| const struct tw9910_scale_ctrl *scale; |
| }; |
| |
| /* |
| * register settings |
| */ |
| |
| #define ENDMARKER { 0xff, 0xff } |
| |
| static const struct regval_list tw9910_default_regs[] = |
| { |
| { OPFORM, 0x00 }, |
| { OUTCTR1, VSP_LO | VSSL_VVALID | HSP_HI | HSSL_HSYNC }, |
| ENDMARKER, |
| }; |
| |
| static const struct soc_camera_data_format tw9910_color_fmt[] = { |
| { |
| .name = "VYUY", |
| .fourcc = V4L2_PIX_FMT_VYUY, |
| .depth = 16, |
| .colorspace = V4L2_COLORSPACE_SMPTE170M, |
| } |
| }; |
| |
| static const struct tw9910_scale_ctrl tw9910_ntsc_scales[] = { |
| { |
| .name = "NTSC SQ", |
| .width = 640, |
| .height = 480, |
| .hscale = 0x0100, |
| .vscale = 0x0100, |
| }, |
| { |
| .name = "NTSC CCIR601", |
| .width = 720, |
| .height = 480, |
| .hscale = 0x0100, |
| .vscale = 0x0100, |
| }, |
| { |
| .name = "NTSC SQ (CIF)", |
| .width = 320, |
| .height = 240, |
| .hscale = 0x0200, |
| .vscale = 0x0200, |
| }, |
| { |
| .name = "NTSC CCIR601 (CIF)", |
| .width = 360, |
| .height = 240, |
| .hscale = 0x0200, |
| .vscale = 0x0200, |
| }, |
| { |
| .name = "NTSC SQ (QCIF)", |
| .width = 160, |
| .height = 120, |
| .hscale = 0x0400, |
| .vscale = 0x0400, |
| }, |
| { |
| .name = "NTSC CCIR601 (QCIF)", |
| .width = 180, |
| .height = 120, |
| .hscale = 0x0400, |
| .vscale = 0x0400, |
| }, |
| }; |
| |
| static const struct tw9910_scale_ctrl tw9910_pal_scales[] = { |
| { |
| .name = "PAL SQ", |
| .width = 768, |
| .height = 576, |
| .hscale = 0x0100, |
| .vscale = 0x0100, |
| }, |
| { |
| .name = "PAL CCIR601", |
| .width = 720, |
| .height = 576, |
| .hscale = 0x0100, |
| .vscale = 0x0100, |
| }, |
| { |
| .name = "PAL SQ (CIF)", |
| .width = 384, |
| .height = 288, |
| .hscale = 0x0200, |
| .vscale = 0x0200, |
| }, |
| { |
| .name = "PAL CCIR601 (CIF)", |
| .width = 360, |
| .height = 288, |
| .hscale = 0x0200, |
| .vscale = 0x0200, |
| }, |
| { |
| .name = "PAL SQ (QCIF)", |
| .width = 192, |
| .height = 144, |
| .hscale = 0x0400, |
| .vscale = 0x0400, |
| }, |
| { |
| .name = "PAL CCIR601 (QCIF)", |
| .width = 180, |
| .height = 144, |
| .hscale = 0x0400, |
| .vscale = 0x0400, |
| }, |
| }; |
| |
| static const struct tw9910_cropping_ctrl tw9910_cropping_ctrl = { |
| .vdelay = 0x0012, |
| .vactive = 0x00F0, |
| .hdelay = 0x0010, |
| .hactive = 0x02D0, |
| }; |
| |
| static const struct tw9910_hsync_ctrl tw9910_hsync_ctrl = { |
| .start = 0x0260, |
| .end = 0x0300, |
| }; |
| |
| /* |
| * general function |
| */ |
| static struct tw9910_priv *to_tw9910(const struct i2c_client *client) |
| { |
| return container_of(i2c_get_clientdata(client), struct tw9910_priv, |
| subdev); |
| } |
| |
| static int tw9910_set_scale(struct i2c_client *client, |
| const struct tw9910_scale_ctrl *scale) |
| { |
| int ret; |
| |
| ret = i2c_smbus_write_byte_data(client, SCALE_HI, |
| (scale->vscale & 0x0F00) >> 4 | |
| (scale->hscale & 0x0F00) >> 8); |
| if (ret < 0) |
| return ret; |
| |
| ret = i2c_smbus_write_byte_data(client, HSCALE_LO, |
| scale->hscale & 0x00FF); |
| if (ret < 0) |
| return ret; |
| |
| ret = i2c_smbus_write_byte_data(client, VSCALE_LO, |
| scale->vscale & 0x00FF); |
| |
| return ret; |
| } |
| |
| static int tw9910_set_cropping(struct i2c_client *client, |
| const struct tw9910_cropping_ctrl *cropping) |
| { |
| int ret; |
| |
| ret = i2c_smbus_write_byte_data(client, CROP_HI, |
| (cropping->vdelay & 0x0300) >> 2 | |
| (cropping->vactive & 0x0300) >> 4 | |
| (cropping->hdelay & 0x0300) >> 6 | |
| (cropping->hactive & 0x0300) >> 8); |
| if (ret < 0) |
| return ret; |
| |
| ret = i2c_smbus_write_byte_data(client, VDELAY_LO, |
| cropping->vdelay & 0x00FF); |
| if (ret < 0) |
| return ret; |
| |
| ret = i2c_smbus_write_byte_data(client, VACTIVE_LO, |
| cropping->vactive & 0x00FF); |
| if (ret < 0) |
| return ret; |
| |
| ret = i2c_smbus_write_byte_data(client, HDELAY_LO, |
| cropping->hdelay & 0x00FF); |
| if (ret < 0) |
| return ret; |
| |
| ret = i2c_smbus_write_byte_data(client, HACTIVE_LO, |
| cropping->hactive & 0x00FF); |
| |
| return ret; |
| } |
| |
| static int tw9910_set_hsync(struct i2c_client *client, |
| const struct tw9910_hsync_ctrl *hsync) |
| { |
| int ret; |
| |
| /* bit 10 - 3 */ |
| ret = i2c_smbus_write_byte_data(client, HSGEGIN, |
| (hsync->start & 0x07F8) >> 3); |
| if (ret < 0) |
| return ret; |
| |
| /* bit 10 - 3 */ |
| ret = i2c_smbus_write_byte_data(client, HSEND, |
| (hsync->end & 0x07F8) >> 3); |
| if (ret < 0) |
| return ret; |
| |
| /* bit 2 - 0 */ |
| ret = i2c_smbus_read_byte_data(client, HSLOWCTL); |
| if (ret < 0) |
| return ret; |
| |
| ret = i2c_smbus_write_byte_data(client, HSLOWCTL, |
| (ret & 0x88) | |
| (hsync->start & 0x0007) << 4 | |
| (hsync->end & 0x0007)); |
| |
| return ret; |
| } |
| |
| static int tw9910_write_array(struct i2c_client *client, |
| const struct regval_list *vals) |
| { |
| while (vals->reg_num != 0xff) { |
| int ret = i2c_smbus_write_byte_data(client, |
| vals->reg_num, |
| vals->value); |
| if (ret < 0) |
| return ret; |
| vals++; |
| } |
| return 0; |
| } |
| |
| static int tw9910_mask_set(struct i2c_client *client, u8 command, |
| u8 mask, u8 set) |
| { |
| s32 val = i2c_smbus_read_byte_data(client, command); |
| if (val < 0) |
| return val; |
| |
| val &= ~mask; |
| val |= set & mask; |
| |
| return i2c_smbus_write_byte_data(client, command, val); |
| } |
| |
| static void tw9910_reset(struct i2c_client *client) |
| { |
| i2c_smbus_write_byte_data(client, ACNTL1, SRESET); |
| msleep(1); |
| } |
| |
| static const struct tw9910_scale_ctrl* |
| tw9910_select_norm(struct soc_camera_device *icd, u32 width, u32 height) |
| { |
| const struct tw9910_scale_ctrl *scale; |
| const struct tw9910_scale_ctrl *ret = NULL; |
| v4l2_std_id norm = icd->vdev->current_norm; |
| __u32 diff = 0xffffffff, tmp; |
| int size, i; |
| |
| if (norm & V4L2_STD_NTSC) { |
| scale = tw9910_ntsc_scales; |
| size = ARRAY_SIZE(tw9910_ntsc_scales); |
| } else if (norm & V4L2_STD_PAL) { |
| scale = tw9910_pal_scales; |
| size = ARRAY_SIZE(tw9910_pal_scales); |
| } else { |
| return NULL; |
| } |
| |
| for (i = 0; i < size; i++) { |
| tmp = abs(width - scale[i].width) + |
| abs(height - scale[i].height); |
| if (tmp < diff) { |
| diff = tmp; |
| ret = scale + i; |
| } |
| } |
| |
| return ret; |
| } |
| |
| /* |
| * soc_camera_ops function |
| */ |
| static int tw9910_s_stream(struct v4l2_subdev *sd, int enable) |
| { |
| struct i2c_client *client = sd->priv; |
| struct tw9910_priv *priv = to_tw9910(client); |
| |
| if (!enable) |
| return 0; |
| |
| if (!priv->scale) { |
| dev_err(&client->dev, "norm select error\n"); |
| return -EPERM; |
| } |
| |
| dev_dbg(&client->dev, "%s %dx%d\n", |
| priv->scale->name, |
| priv->scale->width, |
| priv->scale->height); |
| |
| return 0; |
| } |
| |
| static int tw9910_set_bus_param(struct soc_camera_device *icd, |
| unsigned long flags) |
| { |
| return 0; |
| } |
| |
| static unsigned long tw9910_query_bus_param(struct soc_camera_device *icd) |
| { |
| struct i2c_client *client = to_i2c_client(to_soc_camera_control(icd)); |
| struct tw9910_priv *priv = to_tw9910(client); |
| struct soc_camera_link *icl = to_soc_camera_link(icd); |
| unsigned long flags = SOCAM_PCLK_SAMPLE_RISING | SOCAM_MASTER | |
| SOCAM_VSYNC_ACTIVE_HIGH | SOCAM_HSYNC_ACTIVE_HIGH | |
| SOCAM_DATA_ACTIVE_HIGH | priv->info->buswidth; |
| |
| return soc_camera_apply_sensor_flags(icl, flags); |
| } |
| |
| static int tw9910_s_std(struct v4l2_subdev *sd, v4l2_std_id norm) |
| { |
| int ret = -EINVAL; |
| |
| if (norm & (V4L2_STD_NTSC | V4L2_STD_PAL)) |
| ret = 0; |
| |
| return ret; |
| } |
| |
| static int tw9910_enum_input(struct soc_camera_device *icd, |
| struct v4l2_input *inp) |
| { |
| inp->type = V4L2_INPUT_TYPE_TUNER; |
| inp->std = V4L2_STD_UNKNOWN; |
| strcpy(inp->name, "Video"); |
| |
| return 0; |
| } |
| |
| static int tw9910_g_chip_ident(struct v4l2_subdev *sd, |
| struct v4l2_dbg_chip_ident *id) |
| { |
| id->ident = V4L2_IDENT_TW9910; |
| id->revision = 0; |
| |
| return 0; |
| } |
| |
| #ifdef CONFIG_VIDEO_ADV_DEBUG |
| static int tw9910_g_register(struct v4l2_subdev *sd, |
| struct v4l2_dbg_register *reg) |
| { |
| struct i2c_client *client = sd->priv; |
| int ret; |
| |
| if (reg->reg > 0xff) |
| return -EINVAL; |
| |
| ret = i2c_smbus_read_byte_data(client, reg->reg); |
| if (ret < 0) |
| return ret; |
| |
| /* ret = int |
| * reg->val = __u64 |
| */ |
| reg->val = (__u64)ret; |
| |
| return 0; |
| } |
| |
| static int tw9910_s_register(struct v4l2_subdev *sd, |
| struct v4l2_dbg_register *reg) |
| { |
| struct i2c_client *client = sd->priv; |
| |
| if (reg->reg > 0xff || |
| reg->val > 0xff) |
| return -EINVAL; |
| |
| return i2c_smbus_write_byte_data(client, reg->reg, reg->val); |
| } |
| #endif |
| |
| static int tw9910_s_crop(struct v4l2_subdev *sd, struct v4l2_crop *a) |
| { |
| struct v4l2_rect *rect = &a->c; |
| struct i2c_client *client = sd->priv; |
| struct tw9910_priv *priv = to_tw9910(client); |
| struct soc_camera_device *icd = client->dev.platform_data; |
| int ret = -EINVAL; |
| u8 val; |
| |
| /* |
| * select suitable norm |
| */ |
| priv->scale = tw9910_select_norm(icd, rect->width, rect->height); |
| if (!priv->scale) |
| goto tw9910_set_fmt_error; |
| |
| /* |
| * reset hardware |
| */ |
| tw9910_reset(client); |
| ret = tw9910_write_array(client, tw9910_default_regs); |
| if (ret < 0) |
| goto tw9910_set_fmt_error; |
| |
| /* |
| * set bus width |
| */ |
| val = 0x00; |
| if (SOCAM_DATAWIDTH_16 == priv->info->buswidth) |
| val = LEN; |
| |
| ret = tw9910_mask_set(client, OPFORM, LEN, val); |
| if (ret < 0) |
| goto tw9910_set_fmt_error; |
| |
| /* |
| * select MPOUT behavior |
| */ |
| switch (priv->info->mpout) { |
| case TW9910_MPO_VLOSS: |
| val = RTSEL_VLOSS; break; |
| case TW9910_MPO_HLOCK: |
| val = RTSEL_HLOCK; break; |
| case TW9910_MPO_SLOCK: |
| val = RTSEL_SLOCK; break; |
| case TW9910_MPO_VLOCK: |
| val = RTSEL_VLOCK; break; |
| case TW9910_MPO_MONO: |
| val = RTSEL_MONO; break; |
| case TW9910_MPO_DET50: |
| val = RTSEL_DET50; break; |
| case TW9910_MPO_FIELD: |
| val = RTSEL_FIELD; break; |
| case TW9910_MPO_RTCO: |
| val = RTSEL_RTCO; break; |
| default: |
| val = 0; |
| } |
| |
| ret = tw9910_mask_set(client, VBICNTL, RTSEL_MASK, val); |
| if (ret < 0) |
| goto tw9910_set_fmt_error; |
| |
| /* |
| * set scale |
| */ |
| ret = tw9910_set_scale(client, priv->scale); |
| if (ret < 0) |
| goto tw9910_set_fmt_error; |
| |
| /* |
| * set cropping |
| */ |
| ret = tw9910_set_cropping(client, &tw9910_cropping_ctrl); |
| if (ret < 0) |
| goto tw9910_set_fmt_error; |
| |
| /* |
| * set hsync |
| */ |
| ret = tw9910_set_hsync(client, &tw9910_hsync_ctrl); |
| if (ret < 0) |
| goto tw9910_set_fmt_error; |
| |
| rect->width = priv->scale->width; |
| rect->height = priv->scale->height; |
| rect->left = 0; |
| rect->top = 0; |
| |
| return ret; |
| |
| tw9910_set_fmt_error: |
| |
| tw9910_reset(client); |
| priv->scale = NULL; |
| |
| return ret; |
| } |
| |
| static int tw9910_g_crop(struct v4l2_subdev *sd, struct v4l2_crop *a) |
| { |
| struct i2c_client *client = sd->priv; |
| struct tw9910_priv *priv = to_tw9910(client); |
| |
| if (!priv->scale) { |
| int ret; |
| struct v4l2_crop crop = { |
| .c = { |
| .left = 0, |
| .top = 0, |
| .width = 640, |
| .height = 480, |
| }, |
| }; |
| ret = tw9910_s_crop(sd, &crop); |
| if (ret < 0) |
| return ret; |
| } |
| |
| a->c.left = 0; |
| a->c.top = 0; |
| a->c.width = priv->scale->width; |
| a->c.height = priv->scale->height; |
| a->type = V4L2_BUF_TYPE_VIDEO_CAPTURE; |
| |
| return 0; |
| } |
| |
| static int tw9910_cropcap(struct v4l2_subdev *sd, struct v4l2_cropcap *a) |
| { |
| a->bounds.left = 0; |
| a->bounds.top = 0; |
| a->bounds.width = 768; |
| a->bounds.height = 576; |
| a->defrect.left = 0; |
| a->defrect.top = 0; |
| a->defrect.width = 640; |
| a->defrect.height = 480; |
| a->type = V4L2_BUF_TYPE_VIDEO_CAPTURE; |
| a->pixelaspect.numerator = 1; |
| a->pixelaspect.denominator = 1; |
| |
| return 0; |
| } |
| |
| static int tw9910_g_fmt(struct v4l2_subdev *sd, struct v4l2_format *f) |
| { |
| struct i2c_client *client = sd->priv; |
| struct tw9910_priv *priv = to_tw9910(client); |
| struct v4l2_pix_format *pix = &f->fmt.pix; |
| |
| if (!priv->scale) { |
| int ret; |
| struct v4l2_crop crop = { |
| .c = { |
| .left = 0, |
| .top = 0, |
| .width = 640, |
| .height = 480, |
| }, |
| }; |
| ret = tw9910_s_crop(sd, &crop); |
| if (ret < 0) |
| return ret; |
| } |
| |
| f->type = V4L2_BUF_TYPE_VIDEO_CAPTURE; |
| |
| pix->width = priv->scale->width; |
| pix->height = priv->scale->height; |
| pix->pixelformat = V4L2_PIX_FMT_VYUY; |
| pix->colorspace = V4L2_COLORSPACE_SMPTE170M; |
| pix->field = V4L2_FIELD_INTERLACED; |
| |
| return 0; |
| } |
| |
| static int tw9910_s_fmt(struct v4l2_subdev *sd, struct v4l2_format *f) |
| { |
| struct i2c_client *client = sd->priv; |
| struct tw9910_priv *priv = to_tw9910(client); |
| struct v4l2_pix_format *pix = &f->fmt.pix; |
| /* See tw9910_s_crop() - no proper cropping support */ |
| struct v4l2_crop a = { |
| .c = { |
| .left = 0, |
| .top = 0, |
| .width = pix->width, |
| .height = pix->height, |
| }, |
| }; |
| int i, ret; |
| |
| /* |
| * check color format |
| */ |
| for (i = 0; i < ARRAY_SIZE(tw9910_color_fmt); i++) |
| if (pix->pixelformat == tw9910_color_fmt[i].fourcc) |
| break; |
| |
| if (i == ARRAY_SIZE(tw9910_color_fmt)) |
| return -EINVAL; |
| |
| ret = tw9910_s_crop(sd, &a); |
| if (!ret) { |
| pix->width = priv->scale->width; |
| pix->height = priv->scale->height; |
| } |
| return ret; |
| } |
| |
| static int tw9910_try_fmt(struct v4l2_subdev *sd, struct v4l2_format *f) |
| { |
| struct i2c_client *client = sd->priv; |
| struct soc_camera_device *icd = client->dev.platform_data; |
| struct v4l2_pix_format *pix = &f->fmt.pix; |
| const struct tw9910_scale_ctrl *scale; |
| |
| if (V4L2_FIELD_ANY == pix->field) { |
| pix->field = V4L2_FIELD_INTERLACED; |
| } else if (V4L2_FIELD_INTERLACED != pix->field) { |
| dev_err(&client->dev, "Field type invalid.\n"); |
| return -EINVAL; |
| } |
| |
| /* |
| * select suitable norm |
| */ |
| scale = tw9910_select_norm(icd, pix->width, pix->height); |
| if (!scale) |
| return -EINVAL; |
| |
| pix->width = scale->width; |
| pix->height = scale->height; |
| |
| return 0; |
| } |
| |
| static int tw9910_video_probe(struct soc_camera_device *icd, |
| struct i2c_client *client) |
| { |
| struct tw9910_priv *priv = to_tw9910(client); |
| s32 val; |
| |
| /* |
| * We must have a parent by now. And it cannot be a wrong one. |
| * So this entire test is completely redundant. |
| */ |
| if (!icd->dev.parent || |
| to_soc_camera_host(icd->dev.parent)->nr != icd->iface) |
| return -ENODEV; |
| |
| /* |
| * tw9910 only use 8 or 16 bit bus width |
| */ |
| if (SOCAM_DATAWIDTH_16 != priv->info->buswidth && |
| SOCAM_DATAWIDTH_8 != priv->info->buswidth) { |
| dev_err(&client->dev, "bus width error\n"); |
| return -ENODEV; |
| } |
| |
| icd->formats = tw9910_color_fmt; |
| icd->num_formats = ARRAY_SIZE(tw9910_color_fmt); |
| |
| /* |
| * check and show Product ID |
| */ |
| val = i2c_smbus_read_byte_data(client, ID); |
| |
| if (0x0B != GET_ID(val) || |
| 0x00 != GET_ReV(val)) { |
| dev_err(&client->dev, |
| "Product ID error %x:%x\n", GET_ID(val), GET_ReV(val)); |
| return -ENODEV; |
| } |
| |
| dev_info(&client->dev, |
| "tw9910 Product ID %0x:%0x\n", GET_ID(val), GET_ReV(val)); |
| |
| icd->vdev->tvnorms = V4L2_STD_NTSC | V4L2_STD_PAL; |
| icd->vdev->current_norm = V4L2_STD_NTSC; |
| |
| return 0; |
| } |
| |
| static struct soc_camera_ops tw9910_ops = { |
| .set_bus_param = tw9910_set_bus_param, |
| .query_bus_param = tw9910_query_bus_param, |
| .enum_input = tw9910_enum_input, |
| }; |
| |
| static struct v4l2_subdev_core_ops tw9910_subdev_core_ops = { |
| .g_chip_ident = tw9910_g_chip_ident, |
| .s_std = tw9910_s_std, |
| #ifdef CONFIG_VIDEO_ADV_DEBUG |
| .g_register = tw9910_g_register, |
| .s_register = tw9910_s_register, |
| #endif |
| }; |
| |
| static struct v4l2_subdev_video_ops tw9910_subdev_video_ops = { |
| .s_stream = tw9910_s_stream, |
| .g_fmt = tw9910_g_fmt, |
| .s_fmt = tw9910_s_fmt, |
| .try_fmt = tw9910_try_fmt, |
| .cropcap = tw9910_cropcap, |
| .g_crop = tw9910_g_crop, |
| .s_crop = tw9910_s_crop, |
| }; |
| |
| static struct v4l2_subdev_ops tw9910_subdev_ops = { |
| .core = &tw9910_subdev_core_ops, |
| .video = &tw9910_subdev_video_ops, |
| }; |
| |
| /* |
| * i2c_driver function |
| */ |
| |
| static int tw9910_probe(struct i2c_client *client, |
| const struct i2c_device_id *did) |
| |
| { |
| struct tw9910_priv *priv; |
| struct tw9910_video_info *info; |
| struct soc_camera_device *icd = client->dev.platform_data; |
| struct i2c_adapter *adapter = |
| to_i2c_adapter(client->dev.parent); |
| struct soc_camera_link *icl; |
| int ret; |
| |
| if (!icd) { |
| dev_err(&client->dev, "TW9910: missing soc-camera data!\n"); |
| return -EINVAL; |
| } |
| |
| icl = to_soc_camera_link(icd); |
| if (!icl) |
| return -EINVAL; |
| |
| info = container_of(icl, struct tw9910_video_info, link); |
| |
| if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA)) { |
| dev_err(&client->dev, |
| "I2C-Adapter doesn't support " |
| "I2C_FUNC_SMBUS_BYTE_DATA\n"); |
| return -EIO; |
| } |
| |
| priv = kzalloc(sizeof(*priv), GFP_KERNEL); |
| if (!priv) |
| return -ENOMEM; |
| |
| priv->info = info; |
| |
| v4l2_i2c_subdev_init(&priv->subdev, client, &tw9910_subdev_ops); |
| |
| icd->ops = &tw9910_ops; |
| icd->iface = info->link.bus_id; |
| |
| ret = tw9910_video_probe(icd, client); |
| if (ret) { |
| icd->ops = NULL; |
| i2c_set_clientdata(client, NULL); |
| kfree(priv); |
| } |
| |
| return ret; |
| } |
| |
| static int tw9910_remove(struct i2c_client *client) |
| { |
| struct tw9910_priv *priv = to_tw9910(client); |
| struct soc_camera_device *icd = client->dev.platform_data; |
| |
| icd->ops = NULL; |
| i2c_set_clientdata(client, NULL); |
| kfree(priv); |
| return 0; |
| } |
| |
| static const struct i2c_device_id tw9910_id[] = { |
| { "tw9910", 0 }, |
| { } |
| }; |
| MODULE_DEVICE_TABLE(i2c, tw9910_id); |
| |
| static struct i2c_driver tw9910_i2c_driver = { |
| .driver = { |
| .name = "tw9910", |
| }, |
| .probe = tw9910_probe, |
| .remove = tw9910_remove, |
| .id_table = tw9910_id, |
| }; |
| |
| /* |
| * module function |
| */ |
| static int __init tw9910_module_init(void) |
| { |
| return i2c_add_driver(&tw9910_i2c_driver); |
| } |
| |
| static void __exit tw9910_module_exit(void) |
| { |
| i2c_del_driver(&tw9910_i2c_driver); |
| } |
| |
| module_init(tw9910_module_init); |
| module_exit(tw9910_module_exit); |
| |
| MODULE_DESCRIPTION("SoC Camera driver for tw9910"); |
| MODULE_AUTHOR("Kuninori Morimoto"); |
| MODULE_LICENSE("GPL v2"); |