| /** |
| * tpci200.c |
| * |
| * driver for the TEWS TPCI-200 device |
| * |
| * Copyright (C) 2009-2012 CERN (www.cern.ch) |
| * Author: Nicolas Serafini, EIC2 SA |
| * Author: Samuel Iglesias Gonsalvez <siglesias@igalia.com> |
| * |
| * This program is free software; you can redistribute it and/or modify it |
| * under the terms of the GNU General Public License as published by the Free |
| * Software Foundation; version 2 of the License. |
| */ |
| |
| #include <linux/module.h> |
| #include <linux/slab.h> |
| #include "tpci200.h" |
| |
| static const u16 tpci200_status_timeout[] = { |
| TPCI200_A_TIMEOUT, |
| TPCI200_B_TIMEOUT, |
| TPCI200_C_TIMEOUT, |
| TPCI200_D_TIMEOUT, |
| }; |
| |
| static const u16 tpci200_status_error[] = { |
| TPCI200_A_ERROR, |
| TPCI200_B_ERROR, |
| TPCI200_C_ERROR, |
| TPCI200_D_ERROR, |
| }; |
| |
| static const size_t tpci200_space_size[IPACK_SPACE_COUNT] = { |
| [IPACK_IO_SPACE] = TPCI200_IO_SPACE_SIZE, |
| [IPACK_ID_SPACE] = TPCI200_ID_SPACE_SIZE, |
| [IPACK_INT_SPACE] = TPCI200_INT_SPACE_SIZE, |
| [IPACK_MEM8_SPACE] = TPCI200_MEM8_SPACE_SIZE, |
| [IPACK_MEM16_SPACE] = TPCI200_MEM16_SPACE_SIZE, |
| }; |
| |
| static const size_t tpci200_space_interval[IPACK_SPACE_COUNT] = { |
| [IPACK_IO_SPACE] = TPCI200_IO_SPACE_INTERVAL, |
| [IPACK_ID_SPACE] = TPCI200_ID_SPACE_INTERVAL, |
| [IPACK_INT_SPACE] = TPCI200_INT_SPACE_INTERVAL, |
| [IPACK_MEM8_SPACE] = TPCI200_MEM8_SPACE_INTERVAL, |
| [IPACK_MEM16_SPACE] = TPCI200_MEM16_SPACE_INTERVAL, |
| }; |
| |
| static struct tpci200_board *check_slot(struct ipack_device *dev) |
| { |
| struct tpci200_board *tpci200; |
| |
| if (dev == NULL) |
| return NULL; |
| |
| |
| tpci200 = dev_get_drvdata(dev->bus->parent); |
| |
| if (tpci200 == NULL) { |
| dev_info(&dev->dev, "carrier board not found\n"); |
| return NULL; |
| } |
| |
| if (dev->slot >= TPCI200_NB_SLOT) { |
| dev_info(&dev->dev, |
| "Slot [%d:%d] doesn't exist! Last tpci200 slot is %d.\n", |
| dev->bus->bus_nr, dev->slot, TPCI200_NB_SLOT-1); |
| return NULL; |
| } |
| |
| return tpci200; |
| } |
| |
| static void tpci200_clear_mask(struct tpci200_board *tpci200, |
| __le16 __iomem *addr, u16 mask) |
| { |
| unsigned long flags; |
| spin_lock_irqsave(&tpci200->regs_lock, flags); |
| iowrite16(ioread16(addr) & (~mask), addr); |
| spin_unlock_irqrestore(&tpci200->regs_lock, flags); |
| } |
| |
| static void tpci200_set_mask(struct tpci200_board *tpci200, |
| __le16 __iomem *addr, u16 mask) |
| { |
| unsigned long flags; |
| spin_lock_irqsave(&tpci200->regs_lock, flags); |
| iowrite16(ioread16(addr) | mask, addr); |
| spin_unlock_irqrestore(&tpci200->regs_lock, flags); |
| } |
| |
| static void tpci200_unregister(struct tpci200_board *tpci200) |
| { |
| free_irq(tpci200->info->pdev->irq, (void *) tpci200); |
| |
| pci_iounmap(tpci200->info->pdev, tpci200->info->interface_regs); |
| pci_iounmap(tpci200->info->pdev, tpci200->info->cfg_regs); |
| |
| pci_release_region(tpci200->info->pdev, TPCI200_IP_INTERFACE_BAR); |
| pci_release_region(tpci200->info->pdev, TPCI200_IO_ID_INT_SPACES_BAR); |
| pci_release_region(tpci200->info->pdev, TPCI200_MEM16_SPACE_BAR); |
| pci_release_region(tpci200->info->pdev, TPCI200_MEM8_SPACE_BAR); |
| pci_release_region(tpci200->info->pdev, TPCI200_CFG_MEM_BAR); |
| |
| pci_disable_device(tpci200->info->pdev); |
| pci_dev_put(tpci200->info->pdev); |
| } |
| |
| static void tpci200_enable_irq(struct tpci200_board *tpci200, |
| int islot) |
| { |
| tpci200_set_mask(tpci200, |
| &tpci200->info->interface_regs->control[islot], |
| TPCI200_INT0_EN | TPCI200_INT1_EN); |
| } |
| |
| static void tpci200_disable_irq(struct tpci200_board *tpci200, |
| int islot) |
| { |
| tpci200_clear_mask(tpci200, |
| &tpci200->info->interface_regs->control[islot], |
| TPCI200_INT0_EN | TPCI200_INT1_EN); |
| } |
| |
| static irqreturn_t tpci200_slot_irq(struct slot_irq *slot_irq) |
| { |
| irqreturn_t ret; |
| |
| if (!slot_irq) |
| return -ENODEV; |
| ret = slot_irq->handler(slot_irq->arg); |
| |
| return ret; |
| } |
| |
| static irqreturn_t tpci200_interrupt(int irq, void *dev_id) |
| { |
| struct tpci200_board *tpci200 = (struct tpci200_board *) dev_id; |
| struct slot_irq *slot_irq; |
| irqreturn_t ret; |
| u16 status_reg; |
| int i; |
| |
| /* Read status register */ |
| status_reg = ioread16(&tpci200->info->interface_regs->status); |
| |
| /* Did we cause the interrupt? */ |
| if (!(status_reg & TPCI200_SLOT_INT_MASK)) |
| return IRQ_NONE; |
| |
| /* callback to the IRQ handler for the corresponding slot */ |
| rcu_read_lock(); |
| for (i = 0; i < TPCI200_NB_SLOT; i++) { |
| if (!(status_reg & ((TPCI200_A_INT0 | TPCI200_A_INT1) << (2 * i)))) |
| continue; |
| slot_irq = rcu_dereference(tpci200->slots[i].irq); |
| ret = tpci200_slot_irq(slot_irq); |
| if (ret == -ENODEV) { |
| dev_info(&tpci200->info->pdev->dev, |
| "No registered ISR for slot [%d:%d]!. IRQ will be disabled.\n", |
| tpci200->number, i); |
| tpci200_disable_irq(tpci200, i); |
| } |
| } |
| rcu_read_unlock(); |
| |
| return IRQ_HANDLED; |
| } |
| |
| static int tpci200_free_irq(struct ipack_device *dev) |
| { |
| struct slot_irq *slot_irq; |
| struct tpci200_board *tpci200; |
| |
| tpci200 = check_slot(dev); |
| if (tpci200 == NULL) |
| return -EINVAL; |
| |
| if (mutex_lock_interruptible(&tpci200->mutex)) |
| return -ERESTARTSYS; |
| |
| if (tpci200->slots[dev->slot].irq == NULL) { |
| mutex_unlock(&tpci200->mutex); |
| return -EINVAL; |
| } |
| |
| tpci200_disable_irq(tpci200, dev->slot); |
| slot_irq = tpci200->slots[dev->slot].irq; |
| /* uninstall handler */ |
| RCU_INIT_POINTER(tpci200->slots[dev->slot].irq, NULL); |
| synchronize_rcu(); |
| kfree(slot_irq); |
| mutex_unlock(&tpci200->mutex); |
| return 0; |
| } |
| |
| static int tpci200_request_irq(struct ipack_device *dev, |
| irqreturn_t (*handler)(void *), void *arg) |
| { |
| int res = 0; |
| struct slot_irq *slot_irq; |
| struct tpci200_board *tpci200; |
| |
| tpci200 = check_slot(dev); |
| if (tpci200 == NULL) |
| return -EINVAL; |
| |
| if (mutex_lock_interruptible(&tpci200->mutex)) |
| return -ERESTARTSYS; |
| |
| if (tpci200->slots[dev->slot].irq != NULL) { |
| dev_err(&dev->dev, |
| "Slot [%d:%d] IRQ already registered !\n", |
| dev->bus->bus_nr, |
| dev->slot); |
| res = -EINVAL; |
| goto out_unlock; |
| } |
| |
| slot_irq = kzalloc(sizeof(struct slot_irq), GFP_KERNEL); |
| if (slot_irq == NULL) { |
| dev_err(&dev->dev, |
| "Slot [%d:%d] unable to allocate memory for IRQ !\n", |
| dev->bus->bus_nr, dev->slot); |
| res = -ENOMEM; |
| goto out_unlock; |
| } |
| |
| /* |
| * WARNING: Setup Interrupt Vector in the IndustryPack device |
| * before an IRQ request. |
| * Read the User Manual of your IndustryPack device to know |
| * where to write the vector in memory. |
| */ |
| slot_irq->handler = handler; |
| slot_irq->arg = arg; |
| slot_irq->holder = dev; |
| |
| rcu_assign_pointer(tpci200->slots[dev->slot].irq, slot_irq); |
| tpci200_enable_irq(tpci200, dev->slot); |
| |
| out_unlock: |
| mutex_unlock(&tpci200->mutex); |
| return res; |
| } |
| |
| static int tpci200_register(struct tpci200_board *tpci200) |
| { |
| int i; |
| int res; |
| phys_addr_t ioidint_base; |
| unsigned short slot_ctrl; |
| |
| if (pci_enable_device(tpci200->info->pdev) < 0) |
| return -ENODEV; |
| |
| /* Request IP interface register (Bar 2) */ |
| res = pci_request_region(tpci200->info->pdev, TPCI200_IP_INTERFACE_BAR, |
| "Carrier IP interface registers"); |
| if (res) { |
| dev_err(&tpci200->info->pdev->dev, |
| "(bn 0x%X, sn 0x%X) failed to allocate PCI resource for BAR 2 !", |
| tpci200->info->pdev->bus->number, |
| tpci200->info->pdev->devfn); |
| goto out_disable_pci; |
| } |
| |
| /* Request IO ID INT space (Bar 3) */ |
| res = pci_request_region(tpci200->info->pdev, |
| TPCI200_IO_ID_INT_SPACES_BAR, |
| "Carrier IO ID INT space"); |
| if (res) { |
| dev_err(&tpci200->info->pdev->dev, |
| "(bn 0x%X, sn 0x%X) failed to allocate PCI resource for BAR 3 !", |
| tpci200->info->pdev->bus->number, |
| tpci200->info->pdev->devfn); |
| goto out_release_ip_space; |
| } |
| |
| /* Request MEM8 space (Bar 5) */ |
| res = pci_request_region(tpci200->info->pdev, TPCI200_MEM8_SPACE_BAR, |
| "Carrier MEM8 space"); |
| if (res) { |
| dev_err(&tpci200->info->pdev->dev, |
| "(bn 0x%X, sn 0x%X) failed to allocate PCI resource for BAR 5!", |
| tpci200->info->pdev->bus->number, |
| tpci200->info->pdev->devfn); |
| goto out_release_ioid_int_space; |
| } |
| |
| /* Request MEM16 space (Bar 4) */ |
| res = pci_request_region(tpci200->info->pdev, TPCI200_MEM16_SPACE_BAR, |
| "Carrier MEM16 space"); |
| if (res) { |
| dev_err(&tpci200->info->pdev->dev, |
| "(bn 0x%X, sn 0x%X) failed to allocate PCI resource for BAR 4!", |
| tpci200->info->pdev->bus->number, |
| tpci200->info->pdev->devfn); |
| goto out_release_mem8_space; |
| } |
| |
| /* Map internal tpci200 driver user space */ |
| tpci200->info->interface_regs = |
| ioremap_nocache(pci_resource_start(tpci200->info->pdev, |
| TPCI200_IP_INTERFACE_BAR), |
| TPCI200_IFACE_SIZE); |
| |
| /* Initialize lock that protects interface_regs */ |
| spin_lock_init(&tpci200->regs_lock); |
| |
| ioidint_base = pci_resource_start(tpci200->info->pdev, |
| TPCI200_IO_ID_INT_SPACES_BAR); |
| tpci200->mod_mem[IPACK_IO_SPACE] = ioidint_base + TPCI200_IO_SPACE_OFF; |
| tpci200->mod_mem[IPACK_ID_SPACE] = ioidint_base + TPCI200_ID_SPACE_OFF; |
| tpci200->mod_mem[IPACK_INT_SPACE] = |
| ioidint_base + TPCI200_INT_SPACE_OFF; |
| tpci200->mod_mem[IPACK_MEM8_SPACE] = |
| pci_resource_start(tpci200->info->pdev, |
| TPCI200_MEM8_SPACE_BAR); |
| tpci200->mod_mem[IPACK_MEM16_SPACE] = |
| pci_resource_start(tpci200->info->pdev, |
| TPCI200_MEM16_SPACE_BAR); |
| |
| /* Set the default parameters of the slot |
| * INT0 disabled, level sensitive |
| * INT1 disabled, level sensitive |
| * error interrupt disabled |
| * timeout interrupt disabled |
| * recover time disabled |
| * clock rate 8 MHz |
| */ |
| slot_ctrl = 0; |
| for (i = 0; i < TPCI200_NB_SLOT; i++) |
| writew(slot_ctrl, &tpci200->info->interface_regs->control[i]); |
| |
| res = request_irq(tpci200->info->pdev->irq, |
| tpci200_interrupt, IRQF_SHARED, |
| KBUILD_MODNAME, (void *) tpci200); |
| if (res) { |
| dev_err(&tpci200->info->pdev->dev, |
| "(bn 0x%X, sn 0x%X) unable to register IRQ !", |
| tpci200->info->pdev->bus->number, |
| tpci200->info->pdev->devfn); |
| goto out_release_ioid_int_space; |
| } |
| |
| return 0; |
| |
| out_release_mem8_space: |
| pci_release_region(tpci200->info->pdev, TPCI200_MEM8_SPACE_BAR); |
| out_release_ioid_int_space: |
| pci_release_region(tpci200->info->pdev, TPCI200_IO_ID_INT_SPACES_BAR); |
| out_release_ip_space: |
| pci_release_region(tpci200->info->pdev, TPCI200_IP_INTERFACE_BAR); |
| out_disable_pci: |
| pci_disable_device(tpci200->info->pdev); |
| return res; |
| } |
| |
| static int tpci200_get_clockrate(struct ipack_device *dev) |
| { |
| struct tpci200_board *tpci200 = check_slot(dev); |
| __le16 __iomem *addr; |
| |
| if (!tpci200) |
| return -ENODEV; |
| |
| addr = &tpci200->info->interface_regs->control[dev->slot]; |
| return (ioread16(addr) & TPCI200_CLK32) ? 32 : 8; |
| } |
| |
| static int tpci200_set_clockrate(struct ipack_device *dev, int mherz) |
| { |
| struct tpci200_board *tpci200 = check_slot(dev); |
| __le16 __iomem *addr; |
| |
| if (!tpci200) |
| return -ENODEV; |
| |
| addr = &tpci200->info->interface_regs->control[dev->slot]; |
| |
| switch (mherz) { |
| case 8: |
| tpci200_clear_mask(tpci200, addr, TPCI200_CLK32); |
| break; |
| case 32: |
| tpci200_set_mask(tpci200, addr, TPCI200_CLK32); |
| break; |
| default: |
| return -EINVAL; |
| } |
| return 0; |
| } |
| |
| static int tpci200_get_error(struct ipack_device *dev) |
| { |
| struct tpci200_board *tpci200 = check_slot(dev); |
| __le16 __iomem *addr; |
| u16 mask; |
| |
| if (!tpci200) |
| return -ENODEV; |
| |
| addr = &tpci200->info->interface_regs->status; |
| mask = tpci200_status_error[dev->slot]; |
| return (ioread16(addr) & mask) ? 1 : 0; |
| } |
| |
| static int tpci200_get_timeout(struct ipack_device *dev) |
| { |
| struct tpci200_board *tpci200 = check_slot(dev); |
| __le16 __iomem *addr; |
| u16 mask; |
| |
| if (!tpci200) |
| return -ENODEV; |
| |
| addr = &tpci200->info->interface_regs->status; |
| mask = tpci200_status_timeout[dev->slot]; |
| |
| return (ioread16(addr) & mask) ? 1 : 0; |
| } |
| |
| static int tpci200_reset_timeout(struct ipack_device *dev) |
| { |
| struct tpci200_board *tpci200 = check_slot(dev); |
| __le16 __iomem *addr; |
| u16 mask; |
| |
| if (!tpci200) |
| return -ENODEV; |
| |
| addr = &tpci200->info->interface_regs->status; |
| mask = tpci200_status_timeout[dev->slot]; |
| |
| iowrite16(mask, addr); |
| return 0; |
| } |
| |
| static void tpci200_uninstall(struct tpci200_board *tpci200) |
| { |
| tpci200_unregister(tpci200); |
| kfree(tpci200->slots); |
| } |
| |
| static const struct ipack_bus_ops tpci200_bus_ops = { |
| .request_irq = tpci200_request_irq, |
| .free_irq = tpci200_free_irq, |
| .get_clockrate = tpci200_get_clockrate, |
| .set_clockrate = tpci200_set_clockrate, |
| .get_error = tpci200_get_error, |
| .get_timeout = tpci200_get_timeout, |
| .reset_timeout = tpci200_reset_timeout, |
| }; |
| |
| static int tpci200_install(struct tpci200_board *tpci200) |
| { |
| int res; |
| |
| tpci200->slots = kzalloc( |
| TPCI200_NB_SLOT * sizeof(struct tpci200_slot), GFP_KERNEL); |
| if (tpci200->slots == NULL) |
| return -ENOMEM; |
| |
| res = tpci200_register(tpci200); |
| if (res) { |
| kfree(tpci200->slots); |
| tpci200->slots = NULL; |
| return res; |
| } |
| |
| mutex_init(&tpci200->mutex); |
| return 0; |
| } |
| |
| static void tpci200_release_device(struct ipack_device *dev) |
| { |
| kfree(dev); |
| } |
| |
| static int tpci200_create_device(struct tpci200_board *tpci200, int i) |
| { |
| enum ipack_space space; |
| struct ipack_device *dev = |
| kzalloc(sizeof(struct ipack_device), GFP_KERNEL); |
| if (!dev) |
| return -ENOMEM; |
| dev->slot = i; |
| dev->bus = tpci200->info->ipack_bus; |
| dev->release = tpci200_release_device; |
| |
| for (space = 0; space < IPACK_SPACE_COUNT; space++) { |
| dev->region[space].start = |
| tpci200->mod_mem[space] |
| + tpci200_space_interval[space] * i; |
| dev->region[space].size = tpci200_space_size[space]; |
| } |
| return ipack_device_register(dev); |
| } |
| |
| static int tpci200_pci_probe(struct pci_dev *pdev, |
| const struct pci_device_id *id) |
| { |
| int ret, i; |
| struct tpci200_board *tpci200; |
| u32 reg32; |
| |
| tpci200 = kzalloc(sizeof(struct tpci200_board), GFP_KERNEL); |
| if (!tpci200) |
| return -ENOMEM; |
| |
| tpci200->info = kzalloc(sizeof(struct tpci200_infos), GFP_KERNEL); |
| if (!tpci200->info) { |
| ret = -ENOMEM; |
| goto out_err_info; |
| } |
| |
| pci_dev_get(pdev); |
| |
| /* Obtain a mapping of the carrier's PCI configuration registers */ |
| ret = pci_request_region(pdev, TPCI200_CFG_MEM_BAR, |
| KBUILD_MODNAME " Configuration Memory"); |
| if (ret) { |
| dev_err(&pdev->dev, "Failed to allocate PCI Configuration Memory"); |
| ret = -EBUSY; |
| goto out_err_pci_request; |
| } |
| tpci200->info->cfg_regs = ioremap_nocache( |
| pci_resource_start(pdev, TPCI200_CFG_MEM_BAR), |
| pci_resource_len(pdev, TPCI200_CFG_MEM_BAR)); |
| if (!tpci200->info->cfg_regs) { |
| dev_err(&pdev->dev, "Failed to map PCI Configuration Memory"); |
| ret = -EFAULT; |
| goto out_err_ioremap; |
| } |
| |
| /* Disable byte swapping for 16 bit IP module access. This will ensure |
| * that the Industrypack big endian byte order is preserved by the |
| * carrier. */ |
| reg32 = ioread32(tpci200->info->cfg_regs + LAS1_DESC); |
| reg32 |= 1 << LAS_BIT_BIGENDIAN; |
| iowrite32(reg32, tpci200->info->cfg_regs + LAS1_DESC); |
| |
| reg32 = ioread32(tpci200->info->cfg_regs + LAS2_DESC); |
| reg32 |= 1 << LAS_BIT_BIGENDIAN; |
| iowrite32(reg32, tpci200->info->cfg_regs + LAS2_DESC); |
| |
| /* Save struct pci_dev pointer */ |
| tpci200->info->pdev = pdev; |
| tpci200->info->id_table = (struct pci_device_id *)id; |
| |
| /* register the device and initialize it */ |
| ret = tpci200_install(tpci200); |
| if (ret) { |
| dev_err(&pdev->dev, "error during tpci200 install\n"); |
| ret = -ENODEV; |
| goto out_err_install; |
| } |
| |
| /* Register the carrier in the industry pack bus driver */ |
| tpci200->info->ipack_bus = ipack_bus_register(&pdev->dev, |
| TPCI200_NB_SLOT, |
| &tpci200_bus_ops); |
| if (!tpci200->info->ipack_bus) { |
| dev_err(&pdev->dev, |
| "error registering the carrier on ipack driver\n"); |
| ret = -EFAULT; |
| goto out_err_bus_register; |
| } |
| |
| /* save the bus number given by ipack to logging purpose */ |
| tpci200->number = tpci200->info->ipack_bus->bus_nr; |
| dev_set_drvdata(&pdev->dev, tpci200); |
| |
| for (i = 0; i < TPCI200_NB_SLOT; i++) |
| tpci200_create_device(tpci200, i); |
| return 0; |
| |
| out_err_bus_register: |
| tpci200_uninstall(tpci200); |
| out_err_install: |
| iounmap(tpci200->info->cfg_regs); |
| out_err_ioremap: |
| pci_release_region(pdev, TPCI200_CFG_MEM_BAR); |
| out_err_pci_request: |
| pci_dev_put(pdev); |
| kfree(tpci200->info); |
| out_err_info: |
| kfree(tpci200); |
| return ret; |
| } |
| |
| static void __tpci200_pci_remove(struct tpci200_board *tpci200) |
| { |
| ipack_bus_unregister(tpci200->info->ipack_bus); |
| tpci200_uninstall(tpci200); |
| |
| kfree(tpci200->info); |
| kfree(tpci200); |
| } |
| |
| static void tpci200_pci_remove(struct pci_dev *dev) |
| { |
| struct tpci200_board *tpci200 = pci_get_drvdata(dev); |
| |
| __tpci200_pci_remove(tpci200); |
| } |
| |
| static DEFINE_PCI_DEVICE_TABLE(tpci200_idtable) = { |
| { TPCI200_VENDOR_ID, TPCI200_DEVICE_ID, TPCI200_SUBVENDOR_ID, |
| TPCI200_SUBDEVICE_ID }, |
| { 0, }, |
| }; |
| |
| MODULE_DEVICE_TABLE(pci, tpci200_idtable); |
| |
| static struct pci_driver tpci200_pci_drv = { |
| .name = "tpci200", |
| .id_table = tpci200_idtable, |
| .probe = tpci200_pci_probe, |
| .remove = tpci200_pci_remove, |
| }; |
| |
| module_pci_driver(tpci200_pci_drv); |
| |
| MODULE_DESCRIPTION("TEWS TPCI-200 device driver"); |
| MODULE_LICENSE("GPL"); |