| /* |
| * ezx.c - Common code for the EZX platform. |
| * |
| * Copyright (C) 2005-2006 Harald Welte <laforge@openezx.org>, |
| * 2007-2008 Daniel Ribeiro <drwyrm@gmail.com>, |
| * 2007-2008 Stefan Schmidt <stefan@datenfreihafen.org> |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License version 2 as |
| * published by the Free Software Foundation. |
| * |
| */ |
| |
| #include <linux/kernel.h> |
| #include <linux/init.h> |
| #include <linux/platform_device.h> |
| #include <linux/delay.h> |
| #include <linux/pwm_backlight.h> |
| #include <linux/input.h> |
| |
| #include <asm/setup.h> |
| #include <mach/pxafb.h> |
| #include <mach/ohci.h> |
| #include <mach/i2c.h> |
| #include <mach/pxa27x_keypad.h> |
| |
| #include <mach/mfp-pxa27x.h> |
| #include <mach/pxa-regs.h> |
| #include <mach/pxa2xx-regs.h> |
| #include <asm/mach-types.h> |
| #include <asm/mach/arch.h> |
| |
| #include "devices.h" |
| #include "generic.h" |
| |
| static struct platform_pwm_backlight_data ezx_backlight_data = { |
| .pwm_id = 0, |
| .max_brightness = 1023, |
| .dft_brightness = 1023, |
| .pwm_period_ns = 78770, |
| }; |
| |
| static struct platform_device ezx_backlight_device = { |
| .name = "pwm-backlight", |
| .dev = { |
| .parent = &pxa27x_device_pwm0.dev, |
| .platform_data = &ezx_backlight_data, |
| }, |
| }; |
| |
| static struct pxafb_mode_info mode_ezx_old = { |
| .pixclock = 150000, |
| .xres = 240, |
| .yres = 320, |
| .bpp = 16, |
| .hsync_len = 10, |
| .left_margin = 20, |
| .right_margin = 10, |
| .vsync_len = 2, |
| .upper_margin = 3, |
| .lower_margin = 2, |
| .sync = 0, |
| }; |
| |
| static struct pxafb_mach_info ezx_fb_info_1 = { |
| .modes = &mode_ezx_old, |
| .num_modes = 1, |
| .lcd_conn = LCD_COLOR_TFT_16BPP, |
| }; |
| |
| static struct pxafb_mode_info mode_72r89803y01 = { |
| .pixclock = 192308, |
| .xres = 240, |
| .yres = 320, |
| .bpp = 32, |
| .depth = 18, |
| .hsync_len = 10, |
| .left_margin = 20, |
| .right_margin = 10, |
| .vsync_len = 2, |
| .upper_margin = 3, |
| .lower_margin = 2, |
| .sync = 0, |
| }; |
| |
| static struct pxafb_mach_info ezx_fb_info_2 = { |
| .modes = &mode_72r89803y01, |
| .num_modes = 1, |
| .lcd_conn = LCD_COLOR_TFT_18BPP, |
| }; |
| |
| static struct platform_device *devices[] __initdata = { |
| &ezx_backlight_device, |
| }; |
| |
| static unsigned long ezx_pin_config[] __initdata = { |
| /* PWM backlight */ |
| GPIO16_PWM0_OUT, |
| |
| /* BTUART */ |
| GPIO42_BTUART_RXD, |
| GPIO43_BTUART_TXD, |
| GPIO44_BTUART_CTS, |
| GPIO45_BTUART_RTS, |
| |
| /* I2C */ |
| GPIO117_I2C_SCL, |
| GPIO118_I2C_SDA, |
| |
| /* PCAP SSP */ |
| GPIO29_SSP1_SCLK, |
| GPIO25_SSP1_TXD, |
| GPIO26_SSP1_RXD, |
| GPIO24_GPIO, /* pcap chip select */ |
| GPIO1_GPIO, /* pcap interrupt */ |
| GPIO4_GPIO, /* WDI_AP */ |
| GPIO55_GPIO, /* SYS_RESTART */ |
| |
| /* MMC */ |
| GPIO32_MMC_CLK, |
| GPIO92_MMC_DAT_0, |
| GPIO109_MMC_DAT_1, |
| GPIO110_MMC_DAT_2, |
| GPIO111_MMC_DAT_3, |
| GPIO112_MMC_CMD, |
| GPIO11_GPIO, /* mmc detect */ |
| |
| /* usb to external transceiver */ |
| GPIO34_USB_P2_2, |
| GPIO35_USB_P2_1, |
| GPIO36_USB_P2_4, |
| GPIO39_USB_P2_6, |
| GPIO40_USB_P2_5, |
| GPIO53_USB_P2_3, |
| |
| /* usb to Neptune GSM chip */ |
| GPIO30_USB_P3_2, |
| GPIO31_USB_P3_6, |
| GPIO90_USB_P3_5, |
| GPIO91_USB_P3_1, |
| GPIO56_USB_P3_4, |
| GPIO113_USB_P3_3, |
| }; |
| |
| #if defined(CONFIG_MACH_EZX_A780) || defined(CONFIG_MACH_EZX_E680) |
| static unsigned long gen1_pin_config[] __initdata = { |
| /* flip / lockswitch */ |
| GPIO12_GPIO, |
| |
| /* bluetooth (bcm2035) */ |
| GPIO14_GPIO | WAKEUP_ON_LEVEL_HIGH, /* HOSTWAKE */ |
| GPIO48_GPIO, /* RESET */ |
| GPIO28_GPIO, /* WAKEUP */ |
| |
| /* Neptune handshake */ |
| GPIO0_GPIO | WAKEUP_ON_LEVEL_HIGH, /* BP_RDY */ |
| GPIO57_GPIO, /* AP_RDY */ |
| GPIO13_GPIO | WAKEUP_ON_LEVEL_HIGH, /* WDI */ |
| GPIO3_GPIO | WAKEUP_ON_LEVEL_HIGH, /* WDI2 */ |
| GPIO82_GPIO, /* RESET */ |
| GPIO99_GPIO, /* TC_MM_EN */ |
| |
| /* sound */ |
| GPIO52_SSP3_SCLK, |
| GPIO83_SSP3_SFRM, |
| GPIO81_SSP3_TXD, |
| GPIO89_SSP3_RXD, |
| |
| /* ssp2 pins to in */ |
| GPIO22_GPIO, /* SSP2_SCLK */ |
| GPIO37_GPIO, /* SSP2_SFRM */ |
| GPIO38_GPIO, /* SSP2_TXD */ |
| GPIO88_GPIO, /* SSP2_RXD */ |
| |
| /* camera */ |
| GPIO23_CIF_MCLK, |
| GPIO54_CIF_PCLK, |
| GPIO85_CIF_LV, |
| GPIO84_CIF_FV, |
| GPIO27_CIF_DD_0, |
| GPIO114_CIF_DD_1, |
| GPIO51_CIF_DD_2, |
| GPIO115_CIF_DD_3, |
| GPIO95_CIF_DD_4, |
| GPIO94_CIF_DD_5, |
| GPIO17_CIF_DD_6, |
| GPIO108_CIF_DD_7, |
| GPIO50_GPIO, /* CAM_EN */ |
| GPIO19_GPIO, /* CAM_RST */ |
| |
| /* EMU */ |
| GPIO120_GPIO, /* EMU_MUX1 */ |
| GPIO119_GPIO, /* EMU_MUX2 */ |
| GPIO86_GPIO, /* SNP_INT_CTL */ |
| GPIO87_GPIO, /* SNP_INT_IN */ |
| }; |
| #endif |
| |
| #if defined(CONFIG_MACH_EZX_A1200) || defined(CONFIG_MACH_EZX_A910) || \ |
| defined(CONFIG_MACH_EZX_E2) || defined(CONFIG_MACH_EZX_E6) |
| static unsigned long gen2_pin_config[] __initdata = { |
| /* flip / lockswitch */ |
| GPIO15_GPIO, |
| |
| /* EOC */ |
| GPIO10_GPIO, |
| |
| /* bluetooth (bcm2045) */ |
| GPIO13_GPIO | WAKEUP_ON_LEVEL_HIGH, /* HOSTWAKE */ |
| GPIO37_GPIO, /* RESET */ |
| GPIO57_GPIO, /* WAKEUP */ |
| |
| /* Neptune handshake */ |
| GPIO0_GPIO | WAKEUP_ON_LEVEL_HIGH, /* BP_RDY */ |
| GPIO96_GPIO, /* AP_RDY */ |
| GPIO3_GPIO | WAKEUP_ON_LEVEL_HIGH, /* WDI */ |
| GPIO116_GPIO, /* RESET */ |
| GPIO41_GPIO, /* BP_FLASH */ |
| |
| /* sound */ |
| GPIO52_SSP3_SCLK, |
| GPIO83_SSP3_SFRM, |
| GPIO81_SSP3_TXD, |
| GPIO82_SSP3_RXD, |
| |
| /* ssp2 pins to in */ |
| GPIO22_GPIO, /* SSP2_SCLK */ |
| GPIO14_GPIO, /* SSP2_SFRM */ |
| GPIO38_GPIO, /* SSP2_TXD */ |
| GPIO88_GPIO, /* SSP2_RXD */ |
| |
| /* camera */ |
| GPIO23_CIF_MCLK, |
| GPIO54_CIF_PCLK, |
| GPIO85_CIF_LV, |
| GPIO84_CIF_FV, |
| GPIO27_CIF_DD_0, |
| GPIO114_CIF_DD_1, |
| GPIO51_CIF_DD_2, |
| GPIO115_CIF_DD_3, |
| GPIO95_CIF_DD_4, |
| GPIO48_CIF_DD_5, |
| GPIO93_CIF_DD_6, |
| GPIO12_CIF_DD_7, |
| GPIO50_GPIO, /* CAM_EN */ |
| GPIO28_GPIO, /* CAM_RST */ |
| GPIO17_GPIO, /* CAM_FLASH */ |
| }; |
| #endif |
| |
| #ifdef CONFIG_MACH_EZX_A780 |
| static unsigned long a780_pin_config[] __initdata = { |
| /* keypad */ |
| GPIO93_KP_DKIN_0 | WAKEUP_ON_LEVEL_HIGH, |
| GPIO100_KP_MKIN_0 | WAKEUP_ON_LEVEL_HIGH, |
| GPIO101_KP_MKIN_1 | WAKEUP_ON_LEVEL_HIGH, |
| GPIO102_KP_MKIN_2 | WAKEUP_ON_LEVEL_HIGH, |
| GPIO97_KP_MKIN_3 | WAKEUP_ON_LEVEL_HIGH, |
| GPIO98_KP_MKIN_4 | WAKEUP_ON_LEVEL_HIGH, |
| GPIO103_KP_MKOUT_0, |
| GPIO104_KP_MKOUT_1, |
| GPIO105_KP_MKOUT_2, |
| GPIO106_KP_MKOUT_3, |
| GPIO107_KP_MKOUT_4, |
| |
| /* attenuate sound */ |
| GPIO96_GPIO, |
| }; |
| #endif |
| |
| #ifdef CONFIG_MACH_EZX_E680 |
| static unsigned long e680_pin_config[] __initdata = { |
| /* keypad */ |
| GPIO93_KP_DKIN_0 | WAKEUP_ON_LEVEL_HIGH, |
| GPIO96_KP_DKIN_3 | WAKEUP_ON_LEVEL_HIGH, |
| GPIO97_KP_DKIN_4 | WAKEUP_ON_LEVEL_HIGH, |
| GPIO98_KP_DKIN_5 | WAKEUP_ON_LEVEL_HIGH, |
| GPIO100_KP_MKIN_0 | WAKEUP_ON_LEVEL_HIGH, |
| GPIO101_KP_MKIN_1 | WAKEUP_ON_LEVEL_HIGH, |
| GPIO102_KP_MKIN_2 | WAKEUP_ON_LEVEL_HIGH, |
| GPIO103_KP_MKOUT_0, |
| GPIO104_KP_MKOUT_1, |
| GPIO105_KP_MKOUT_2, |
| GPIO106_KP_MKOUT_3, |
| |
| /* MIDI */ |
| GPIO79_GPIO, /* VA_SEL_BUL */ |
| GPIO80_GPIO, /* FLT_SEL_BUL */ |
| GPIO78_GPIO, /* MIDI_RESET */ |
| GPIO33_GPIO, /* MIDI_CS */ |
| GPIO15_GPIO, /* MIDI_IRQ */ |
| GPIO49_GPIO, /* MIDI_NPWE */ |
| GPIO18_GPIO, /* MIDI_RDY */ |
| |
| /* leds */ |
| GPIO46_GPIO, |
| GPIO47_GPIO, |
| }; |
| #endif |
| |
| #ifdef CONFIG_MACH_EZX_A1200 |
| static unsigned long a1200_pin_config[] __initdata = { |
| /* keypad */ |
| GPIO100_KP_MKIN_0 | WAKEUP_ON_LEVEL_HIGH, |
| GPIO101_KP_MKIN_1 | WAKEUP_ON_LEVEL_HIGH, |
| GPIO102_KP_MKIN_2 | WAKEUP_ON_LEVEL_HIGH, |
| GPIO97_KP_MKIN_3 | WAKEUP_ON_LEVEL_HIGH, |
| GPIO98_KP_MKIN_4 | WAKEUP_ON_LEVEL_HIGH, |
| GPIO103_KP_MKOUT_0, |
| GPIO104_KP_MKOUT_1, |
| GPIO105_KP_MKOUT_2, |
| GPIO106_KP_MKOUT_3, |
| GPIO107_KP_MKOUT_4, |
| GPIO108_KP_MKOUT_5, |
| }; |
| #endif |
| |
| #ifdef CONFIG_MACH_EZX_A910 |
| static unsigned long a910_pin_config[] __initdata = { |
| /* keypad */ |
| GPIO100_KP_MKIN_0 | WAKEUP_ON_LEVEL_HIGH, |
| GPIO101_KP_MKIN_1 | WAKEUP_ON_LEVEL_HIGH, |
| GPIO102_KP_MKIN_2 | WAKEUP_ON_LEVEL_HIGH, |
| GPIO97_KP_MKIN_3 | WAKEUP_ON_LEVEL_HIGH, |
| GPIO98_KP_MKIN_4 | WAKEUP_ON_LEVEL_HIGH, |
| GPIO103_KP_MKOUT_0, |
| GPIO104_KP_MKOUT_1, |
| GPIO105_KP_MKOUT_2, |
| GPIO106_KP_MKOUT_3, |
| GPIO107_KP_MKOUT_4, |
| GPIO108_KP_MKOUT_5, |
| |
| /* WLAN */ |
| GPIO89_GPIO, /* RESET */ |
| GPIO33_GPIO, /* WAKEUP */ |
| GPIO94_GPIO | WAKEUP_ON_LEVEL_HIGH, /* HOSTWAKE */ |
| |
| /* MMC CS */ |
| GPIO20_GPIO, |
| }; |
| #endif |
| |
| #ifdef CONFIG_MACH_EZX_E2 |
| static unsigned long e2_pin_config[] __initdata = { |
| /* keypad */ |
| GPIO100_KP_MKIN_0 | WAKEUP_ON_LEVEL_HIGH, |
| GPIO101_KP_MKIN_1 | WAKEUP_ON_LEVEL_HIGH, |
| GPIO102_KP_MKIN_2 | WAKEUP_ON_LEVEL_HIGH, |
| GPIO97_KP_MKIN_3 | WAKEUP_ON_LEVEL_HIGH, |
| GPIO98_KP_MKIN_4 | WAKEUP_ON_LEVEL_HIGH, |
| GPIO103_KP_MKOUT_0, |
| GPIO104_KP_MKOUT_1, |
| GPIO105_KP_MKOUT_2, |
| GPIO106_KP_MKOUT_3, |
| GPIO107_KP_MKOUT_4, |
| GPIO108_KP_MKOUT_5, |
| }; |
| #endif |
| |
| #ifdef CONFIG_MACH_EZX_E6 |
| static unsigned long e6_pin_config[] __initdata = { |
| /* keypad */ |
| GPIO100_KP_MKIN_0 | WAKEUP_ON_LEVEL_HIGH, |
| GPIO101_KP_MKIN_1 | WAKEUP_ON_LEVEL_HIGH, |
| GPIO102_KP_MKIN_2 | WAKEUP_ON_LEVEL_HIGH, |
| GPIO97_KP_MKIN_3 | WAKEUP_ON_LEVEL_HIGH, |
| GPIO98_KP_MKIN_4 | WAKEUP_ON_LEVEL_HIGH, |
| GPIO103_KP_MKOUT_0, |
| GPIO104_KP_MKOUT_1, |
| GPIO105_KP_MKOUT_2, |
| GPIO106_KP_MKOUT_3, |
| GPIO107_KP_MKOUT_4, |
| GPIO108_KP_MKOUT_5, |
| }; |
| #endif |
| |
| /* KEYPAD */ |
| #ifdef CONFIG_MACH_EZX_A780 |
| static unsigned int a780_key_map[] = { |
| KEY(0, 0, KEY_SEND), |
| KEY(0, 1, KEY_BACK), |
| KEY(0, 2, KEY_END), |
| KEY(0, 3, KEY_PAGEUP), |
| KEY(0, 4, KEY_UP), |
| |
| KEY(1, 0, KEY_NUMERIC_1), |
| KEY(1, 1, KEY_NUMERIC_2), |
| KEY(1, 2, KEY_NUMERIC_3), |
| KEY(1, 3, KEY_SELECT), |
| KEY(1, 4, KEY_KPENTER), |
| |
| KEY(2, 0, KEY_NUMERIC_4), |
| KEY(2, 1, KEY_NUMERIC_5), |
| KEY(2, 2, KEY_NUMERIC_6), |
| KEY(2, 3, KEY_RECORD), |
| KEY(2, 4, KEY_LEFT), |
| |
| KEY(3, 0, KEY_NUMERIC_7), |
| KEY(3, 1, KEY_NUMERIC_8), |
| KEY(3, 2, KEY_NUMERIC_9), |
| KEY(3, 3, KEY_HOME), |
| KEY(3, 4, KEY_RIGHT), |
| |
| KEY(4, 0, KEY_NUMERIC_STAR), |
| KEY(4, 1, KEY_NUMERIC_0), |
| KEY(4, 2, KEY_NUMERIC_POUND), |
| KEY(4, 3, KEY_PAGEDOWN), |
| KEY(4, 4, KEY_DOWN), |
| }; |
| |
| static struct pxa27x_keypad_platform_data a780_keypad_platform_data = { |
| .matrix_key_rows = 5, |
| .matrix_key_cols = 5, |
| .matrix_key_map = a780_key_map, |
| .matrix_key_map_size = ARRAY_SIZE(a780_key_map), |
| |
| .direct_key_map = { KEY_CAMERA }, |
| .direct_key_num = 1, |
| |
| .debounce_interval = 30, |
| }; |
| #endif /* CONFIG_MACH_EZX_A780 */ |
| |
| #ifdef CONFIG_MACH_EZX_E680 |
| static unsigned int e680_key_map[] = { |
| KEY(0, 0, KEY_UP), |
| KEY(0, 1, KEY_RIGHT), |
| KEY(0, 2, KEY_RESERVED), |
| KEY(0, 3, KEY_SEND), |
| |
| KEY(1, 0, KEY_DOWN), |
| KEY(1, 1, KEY_LEFT), |
| KEY(1, 2, KEY_PAGEUP), |
| KEY(1, 3, KEY_PAGEDOWN), |
| |
| KEY(2, 0, KEY_RESERVED), |
| KEY(2, 1, KEY_RESERVED), |
| KEY(2, 2, KEY_RESERVED), |
| KEY(2, 3, KEY_KPENTER), |
| }; |
| |
| static struct pxa27x_keypad_platform_data e680_keypad_platform_data = { |
| .matrix_key_rows = 3, |
| .matrix_key_cols = 4, |
| .matrix_key_map = e680_key_map, |
| .matrix_key_map_size = ARRAY_SIZE(e680_key_map), |
| |
| .direct_key_map = { |
| KEY_CAMERA, |
| KEY_RESERVED, |
| KEY_RESERVED, |
| KEY_F1, |
| KEY_CANCEL, |
| KEY_F2, |
| }, |
| .direct_key_num = 6, |
| |
| .debounce_interval = 30, |
| }; |
| #endif /* CONFIG_MACH_EZX_E680 */ |
| |
| #ifdef CONFIG_MACH_EZX_A1200 |
| static unsigned int a1200_key_map[] = { |
| KEY(0, 0, KEY_RESERVED), |
| KEY(0, 1, KEY_RIGHT), |
| KEY(0, 2, KEY_PAGEDOWN), |
| KEY(0, 3, KEY_RESERVED), |
| KEY(0, 4, KEY_RESERVED), |
| KEY(0, 5, KEY_RESERVED), |
| |
| KEY(1, 0, KEY_RESERVED), |
| KEY(1, 1, KEY_DOWN), |
| KEY(1, 2, KEY_CAMERA), |
| KEY(1, 3, KEY_RESERVED), |
| KEY(1, 4, KEY_RESERVED), |
| KEY(1, 5, KEY_RESERVED), |
| |
| KEY(2, 0, KEY_RESERVED), |
| KEY(2, 1, KEY_KPENTER), |
| KEY(2, 2, KEY_RECORD), |
| KEY(2, 3, KEY_RESERVED), |
| KEY(2, 4, KEY_RESERVED), |
| KEY(2, 5, KEY_SELECT), |
| |
| KEY(3, 0, KEY_RESERVED), |
| KEY(3, 1, KEY_UP), |
| KEY(3, 2, KEY_SEND), |
| KEY(3, 3, KEY_RESERVED), |
| KEY(3, 4, KEY_RESERVED), |
| KEY(3, 5, KEY_RESERVED), |
| |
| KEY(4, 0, KEY_RESERVED), |
| KEY(4, 1, KEY_LEFT), |
| KEY(4, 2, KEY_PAGEUP), |
| KEY(4, 3, KEY_RESERVED), |
| KEY(4, 4, KEY_RESERVED), |
| KEY(4, 5, KEY_RESERVED), |
| }; |
| |
| static struct pxa27x_keypad_platform_data a1200_keypad_platform_data = { |
| .matrix_key_rows = 5, |
| .matrix_key_cols = 6, |
| .matrix_key_map = a1200_key_map, |
| .matrix_key_map_size = ARRAY_SIZE(a1200_key_map), |
| |
| .debounce_interval = 30, |
| }; |
| #endif /* CONFIG_MACH_EZX_A1200 */ |
| |
| #ifdef CONFIG_MACH_EZX_E6 |
| static unsigned int e6_key_map[] = { |
| KEY(0, 0, KEY_RESERVED), |
| KEY(0, 1, KEY_RIGHT), |
| KEY(0, 2, KEY_PAGEDOWN), |
| KEY(0, 3, KEY_RESERVED), |
| KEY(0, 4, KEY_RESERVED), |
| KEY(0, 5, KEY_NEXTSONG), |
| |
| KEY(1, 0, KEY_RESERVED), |
| KEY(1, 1, KEY_DOWN), |
| KEY(1, 2, KEY_PROG1), |
| KEY(1, 3, KEY_RESERVED), |
| KEY(1, 4, KEY_RESERVED), |
| KEY(1, 5, KEY_RESERVED), |
| |
| KEY(2, 0, KEY_RESERVED), |
| KEY(2, 1, KEY_ENTER), |
| KEY(2, 2, KEY_CAMERA), |
| KEY(2, 3, KEY_RESERVED), |
| KEY(2, 4, KEY_RESERVED), |
| KEY(2, 5, KEY_WWW), |
| |
| KEY(3, 0, KEY_RESERVED), |
| KEY(3, 1, KEY_UP), |
| KEY(3, 2, KEY_SEND), |
| KEY(3, 3, KEY_RESERVED), |
| KEY(3, 4, KEY_RESERVED), |
| KEY(3, 5, KEY_PLAYPAUSE), |
| |
| KEY(4, 0, KEY_RESERVED), |
| KEY(4, 1, KEY_LEFT), |
| KEY(4, 2, KEY_PAGEUP), |
| KEY(4, 3, KEY_RESERVED), |
| KEY(4, 4, KEY_RESERVED), |
| KEY(4, 5, KEY_PREVIOUSSONG), |
| }; |
| |
| static struct pxa27x_keypad_platform_data e6_keypad_platform_data = { |
| .matrix_key_rows = 5, |
| .matrix_key_cols = 6, |
| .matrix_key_map = e6_key_map, |
| .matrix_key_map_size = ARRAY_SIZE(e6_key_map), |
| |
| .debounce_interval = 30, |
| }; |
| #endif /* CONFIG_MACH_EZX_E6 */ |
| |
| #ifdef CONFIG_MACH_EZX_A910 |
| static unsigned int a910_key_map[] = { |
| KEY(0, 0, KEY_NUMERIC_6), |
| KEY(0, 1, KEY_RIGHT), |
| KEY(0, 2, KEY_PAGEDOWN), |
| KEY(0, 3, KEY_KPENTER), |
| KEY(0, 4, KEY_NUMERIC_5), |
| KEY(0, 5, KEY_CAMERA), |
| |
| KEY(1, 0, KEY_NUMERIC_8), |
| KEY(1, 1, KEY_DOWN), |
| KEY(1, 2, KEY_RESERVED), |
| KEY(1, 3, KEY_F1), /* Left SoftKey */ |
| KEY(1, 4, KEY_NUMERIC_STAR), |
| KEY(1, 5, KEY_RESERVED), |
| |
| KEY(2, 0, KEY_NUMERIC_7), |
| KEY(2, 1, KEY_NUMERIC_9), |
| KEY(2, 2, KEY_RECORD), |
| KEY(2, 3, KEY_F2), /* Right SoftKey */ |
| KEY(2, 4, KEY_BACK), |
| KEY(2, 5, KEY_SELECT), |
| |
| KEY(3, 0, KEY_NUMERIC_2), |
| KEY(3, 1, KEY_UP), |
| KEY(3, 2, KEY_SEND), |
| KEY(3, 3, KEY_NUMERIC_0), |
| KEY(3, 4, KEY_NUMERIC_1), |
| KEY(3, 5, KEY_RECORD), |
| |
| KEY(4, 0, KEY_NUMERIC_4), |
| KEY(4, 1, KEY_LEFT), |
| KEY(4, 2, KEY_PAGEUP), |
| KEY(4, 3, KEY_NUMERIC_POUND), |
| KEY(4, 4, KEY_NUMERIC_3), |
| KEY(4, 5, KEY_RESERVED), |
| }; |
| |
| static struct pxa27x_keypad_platform_data a910_keypad_platform_data = { |
| .matrix_key_rows = 5, |
| .matrix_key_cols = 6, |
| .matrix_key_map = a910_key_map, |
| .matrix_key_map_size = ARRAY_SIZE(a910_key_map), |
| |
| .debounce_interval = 30, |
| }; |
| #endif /* CONFIG_MACH_EZX_A910 */ |
| |
| #ifdef CONFIG_MACH_EZX_E2 |
| static unsigned int e2_key_map[] = { |
| KEY(0, 0, KEY_NUMERIC_6), |
| KEY(0, 1, KEY_RIGHT), |
| KEY(0, 2, KEY_NUMERIC_9), |
| KEY(0, 3, KEY_NEXTSONG), |
| KEY(0, 4, KEY_NUMERIC_5), |
| KEY(0, 5, KEY_F1), /* Left SoftKey */ |
| |
| KEY(1, 0, KEY_NUMERIC_8), |
| KEY(1, 1, KEY_DOWN), |
| KEY(1, 2, KEY_RESERVED), |
| KEY(1, 3, KEY_PAGEUP), |
| KEY(1, 4, KEY_NUMERIC_STAR), |
| KEY(1, 5, KEY_F2), /* Right SoftKey */ |
| |
| KEY(2, 0, KEY_NUMERIC_7), |
| KEY(2, 1, KEY_KPENTER), |
| KEY(2, 2, KEY_RECORD), |
| KEY(2, 3, KEY_PAGEDOWN), |
| KEY(2, 4, KEY_BACK), |
| KEY(2, 5, KEY_NUMERIC_0), |
| |
| KEY(3, 0, KEY_NUMERIC_2), |
| KEY(3, 1, KEY_UP), |
| KEY(3, 2, KEY_SEND), |
| KEY(3, 3, KEY_PLAYPAUSE), |
| KEY(3, 4, KEY_NUMERIC_1), |
| KEY(3, 5, KEY_SOUND), /* Music SoftKey */ |
| |
| KEY(4, 0, KEY_NUMERIC_4), |
| KEY(4, 1, KEY_LEFT), |
| KEY(4, 2, KEY_NUMERIC_POUND), |
| KEY(4, 3, KEY_PREVIOUSSONG), |
| KEY(4, 4, KEY_NUMERIC_3), |
| KEY(4, 5, KEY_RESERVED), |
| }; |
| |
| static struct pxa27x_keypad_platform_data e2_keypad_platform_data = { |
| .matrix_key_rows = 5, |
| .matrix_key_cols = 6, |
| .matrix_key_map = e2_key_map, |
| .matrix_key_map_size = ARRAY_SIZE(e2_key_map), |
| |
| .debounce_interval = 30, |
| }; |
| #endif /* CONFIG_MACH_EZX_E2 */ |
| |
| #ifdef CONFIG_MACH_EZX_A780 |
| static void __init a780_init(void) |
| { |
| pxa2xx_mfp_config(ARRAY_AND_SIZE(ezx_pin_config)); |
| pxa2xx_mfp_config(ARRAY_AND_SIZE(gen1_pin_config)); |
| pxa2xx_mfp_config(ARRAY_AND_SIZE(a780_pin_config)); |
| |
| pxa_set_i2c_info(NULL); |
| |
| set_pxa_fb_info(&ezx_fb_info_1); |
| |
| pxa_set_keypad_info(&a780_keypad_platform_data); |
| |
| platform_add_devices(devices, ARRAY_SIZE(devices)); |
| } |
| |
| MACHINE_START(EZX_A780, "Motorola EZX A780") |
| .phys_io = 0x40000000, |
| .io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc, |
| .boot_params = 0xa0000100, |
| .map_io = pxa_map_io, |
| .init_irq = pxa27x_init_irq, |
| .timer = &pxa_timer, |
| .init_machine = a780_init, |
| MACHINE_END |
| #endif |
| |
| #ifdef CONFIG_MACH_EZX_E680 |
| static void __init e680_init(void) |
| { |
| pxa2xx_mfp_config(ARRAY_AND_SIZE(ezx_pin_config)); |
| pxa2xx_mfp_config(ARRAY_AND_SIZE(gen1_pin_config)); |
| pxa2xx_mfp_config(ARRAY_AND_SIZE(e680_pin_config)); |
| |
| pxa_set_i2c_info(NULL); |
| |
| set_pxa_fb_info(&ezx_fb_info_1); |
| |
| pxa_set_keypad_info(&e680_keypad_platform_data); |
| |
| platform_add_devices(devices, ARRAY_SIZE(devices)); |
| } |
| |
| MACHINE_START(EZX_E680, "Motorola EZX E680") |
| .phys_io = 0x40000000, |
| .io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc, |
| .boot_params = 0xa0000100, |
| .map_io = pxa_map_io, |
| .init_irq = pxa27x_init_irq, |
| .timer = &pxa_timer, |
| .init_machine = e680_init, |
| MACHINE_END |
| #endif |
| |
| #ifdef CONFIG_MACH_EZX_A1200 |
| static void __init a1200_init(void) |
| { |
| pxa2xx_mfp_config(ARRAY_AND_SIZE(ezx_pin_config)); |
| pxa2xx_mfp_config(ARRAY_AND_SIZE(gen2_pin_config)); |
| pxa2xx_mfp_config(ARRAY_AND_SIZE(a1200_pin_config)); |
| |
| pxa_set_i2c_info(NULL); |
| |
| set_pxa_fb_info(&ezx_fb_info_2); |
| |
| pxa_set_keypad_info(&a1200_keypad_platform_data); |
| |
| platform_add_devices(devices, ARRAY_SIZE(devices)); |
| } |
| |
| MACHINE_START(EZX_A1200, "Motorola EZX A1200") |
| .phys_io = 0x40000000, |
| .io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc, |
| .boot_params = 0xa0000100, |
| .map_io = pxa_map_io, |
| .init_irq = pxa27x_init_irq, |
| .timer = &pxa_timer, |
| .init_machine = a1200_init, |
| MACHINE_END |
| #endif |
| |
| #ifdef CONFIG_MACH_EZX_A910 |
| static void __init a910_init(void) |
| { |
| pxa2xx_mfp_config(ARRAY_AND_SIZE(ezx_pin_config)); |
| pxa2xx_mfp_config(ARRAY_AND_SIZE(gen2_pin_config)); |
| pxa2xx_mfp_config(ARRAY_AND_SIZE(a910_pin_config)); |
| |
| pxa_set_i2c_info(NULL); |
| |
| set_pxa_fb_info(&ezx_fb_info_2); |
| |
| pxa_set_keypad_info(&a910_keypad_platform_data); |
| |
| platform_add_devices(devices, ARRAY_SIZE(devices)); |
| } |
| |
| MACHINE_START(EZX_A910, "Motorola EZX A910") |
| .phys_io = 0x40000000, |
| .io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc, |
| .boot_params = 0xa0000100, |
| .map_io = pxa_map_io, |
| .init_irq = pxa27x_init_irq, |
| .timer = &pxa_timer, |
| .init_machine = a910_init, |
| MACHINE_END |
| #endif |
| |
| #ifdef CONFIG_MACH_EZX_E6 |
| static void __init e6_init(void) |
| { |
| pxa2xx_mfp_config(ARRAY_AND_SIZE(ezx_pin_config)); |
| pxa2xx_mfp_config(ARRAY_AND_SIZE(gen2_pin_config)); |
| pxa2xx_mfp_config(ARRAY_AND_SIZE(e6_pin_config)); |
| |
| pxa_set_i2c_info(NULL); |
| |
| set_pxa_fb_info(&ezx_fb_info_2); |
| |
| pxa_set_keypad_info(&e6_keypad_platform_data); |
| |
| platform_add_devices(devices, ARRAY_SIZE(devices)); |
| } |
| |
| MACHINE_START(EZX_E6, "Motorola EZX E6") |
| .phys_io = 0x40000000, |
| .io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc, |
| .boot_params = 0xa0000100, |
| .map_io = pxa_map_io, |
| .init_irq = pxa27x_init_irq, |
| .timer = &pxa_timer, |
| .init_machine = e6_init, |
| MACHINE_END |
| #endif |
| |
| #ifdef CONFIG_MACH_EZX_E2 |
| static void __init e2_init(void) |
| { |
| pxa2xx_mfp_config(ARRAY_AND_SIZE(ezx_pin_config)); |
| pxa2xx_mfp_config(ARRAY_AND_SIZE(gen2_pin_config)); |
| pxa2xx_mfp_config(ARRAY_AND_SIZE(e2_pin_config)); |
| |
| pxa_set_i2c_info(NULL); |
| |
| set_pxa_fb_info(&ezx_fb_info_2); |
| |
| pxa_set_keypad_info(&e2_keypad_platform_data); |
| |
| platform_add_devices(devices, ARRAY_SIZE(devices)); |
| } |
| |
| MACHINE_START(EZX_E2, "Motorola EZX E2") |
| .phys_io = 0x40000000, |
| .io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc, |
| .boot_params = 0xa0000100, |
| .map_io = pxa_map_io, |
| .init_irq = pxa27x_init_irq, |
| .timer = &pxa_timer, |
| .init_machine = e2_init, |
| MACHINE_END |
| #endif |