dma: dw: add PCI part of the driver
This is the PCI part of the DesignWare DMAC driver. The controller is usually
used in the Intel hardware such as Intel Medfield.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
diff --git a/drivers/dma/dw/Kconfig b/drivers/dma/dw/Kconfig
index efd9e02..db2b41f 100644
--- a/drivers/dma/dw/Kconfig
+++ b/drivers/dma/dw/Kconfig
@@ -15,6 +15,15 @@
Support the Synopsys DesignWare AHB DMA controller. This
can be integrated in chips such as the Atmel AT32ap7000.
+config DW_DMAC_PCI
+ tristate "Synopsys DesignWare AHB DMA PCI driver"
+ depends on PCI
+ select DW_DMAC_CORE
+ help
+ Support the Synopsys DesignWare AHB DMA controller on the
+ platfroms that enumerate it as a PCI device. For example,
+ Intel Medfield has integrated this GPDMA controller.
+
config DW_DMAC_BIG_ENDIAN_IO
bool "Use big endian I/O register access"
default y if AVR32
diff --git a/drivers/dma/dw/Makefile b/drivers/dma/dw/Makefile
index 47f3674..3eebd1c 100644
--- a/drivers/dma/dw/Makefile
+++ b/drivers/dma/dw/Makefile
@@ -3,3 +3,6 @@
obj-$(CONFIG_DW_DMAC) += dw_dmac.o
dw_dmac-objs := platform.o
+
+obj-$(CONFIG_DW_DMAC_PCI) += dw_dmac_pci.o
+dw_dmac_pci-objs := pci.o
diff --git a/drivers/dma/dw/pci.c b/drivers/dma/dw/pci.c
new file mode 100644
index 0000000..e89fc24
--- /dev/null
+++ b/drivers/dma/dw/pci.c
@@ -0,0 +1,101 @@
+/*
+ * PCI driver for the Synopsys DesignWare DMA Controller
+ *
+ * Copyright (C) 2013 Intel Corporation
+ * Author: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/module.h>
+#include <linux/pci.h>
+#include <linux/device.h>
+
+#include "internal.h"
+
+static struct dw_dma_platform_data dw_pci_pdata = {
+ .is_private = 1,
+ .chan_allocation_order = CHAN_ALLOCATION_ASCENDING,
+ .chan_priority = CHAN_PRIORITY_ASCENDING,
+};
+
+static int dw_pci_probe(struct pci_dev *pdev, const struct pci_device_id *pid)
+{
+ struct dw_dma_chip *chip;
+ struct dw_dma_platform_data *pdata = (void *)pid->driver_data;
+ int ret;
+
+ ret = pcim_enable_device(pdev);
+ if (ret)
+ return ret;
+
+ ret = pcim_iomap_regions(pdev, 1 << 0, pci_name(pdev));
+ if (ret) {
+ dev_err(&pdev->dev, "I/O memory remapping failed\n");
+ return ret;
+ }
+
+ pci_set_master(pdev);
+ pci_try_set_mwi(pdev);
+
+ ret = pci_set_dma_mask(pdev, DMA_BIT_MASK(32));
+ if (ret)
+ return ret;
+
+ ret = pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(32));
+ if (ret)
+ return ret;
+
+ chip = devm_kzalloc(&pdev->dev, sizeof(*chip), GFP_KERNEL);
+ if (!chip)
+ return -ENOMEM;
+
+ chip->dev = &pdev->dev;
+ chip->regs = pcim_iomap_table(pdev)[0];
+ chip->irq = pdev->irq;
+
+ ret = dw_dma_probe(chip, pdata);
+ if (ret)
+ return ret;
+
+ pci_set_drvdata(pdev, chip);
+
+ return 0;
+}
+
+static void dw_pci_remove(struct pci_dev *pdev)
+{
+ struct dw_dma_chip *chip = pci_get_drvdata(pdev);
+ int ret;
+
+ ret = dw_dma_remove(chip);
+ if (ret)
+ dev_warn(&pdev->dev, "can't remove device properly: %d\n", ret);
+}
+
+static DEFINE_PCI_DEVICE_TABLE(dw_pci_id_table) = {
+ /* Medfield */
+ { PCI_VDEVICE(INTEL, 0x0827), (kernel_ulong_t)&dw_pci_pdata },
+ { PCI_VDEVICE(INTEL, 0x0830), (kernel_ulong_t)&dw_pci_pdata },
+
+ /* BayTrail */
+ { PCI_VDEVICE(INTEL, 0x0f06), (kernel_ulong_t)&dw_pci_pdata },
+ { PCI_VDEVICE(INTEL, 0x0f40), (kernel_ulong_t)&dw_pci_pdata },
+ { }
+};
+MODULE_DEVICE_TABLE(pci, dw_pci_id_table);
+
+static struct pci_driver dw_pci_driver = {
+ .name = "dw_dmac_pci",
+ .id_table = dw_pci_id_table,
+ .probe = dw_pci_probe,
+ .remove = dw_pci_remove,
+};
+
+module_pci_driver(dw_pci_driver);
+
+MODULE_LICENSE("GPL v2");
+MODULE_DESCRIPTION("Synopsys DesignWare DMA Controller PCI driver");
+MODULE_AUTHOR("Andy Shevchenko <andriy.shevchenko@linux.intel.com>");