qlcnic: Add support for 84xx adapters to load firmware from file
o Use appropriate firmware image file name based on device IDs.
Signed-off-by: Pratik Pujar <pratik.pujar@qlogic.com>
Signed-off-by: Himanshu Madhani <himanshu.madhani@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
diff --git a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_hw.h b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_hw.h
index b89b074..d4c58c6 100644
--- a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_hw.h
+++ b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_hw.h
@@ -84,9 +84,11 @@
/* Firmware image definitions */
#define QLC_83XX_BOOTLOADER_FLASH_ADDR 0x10000
#define QLC_83XX_FW_FILE_NAME "83xx_fw.bin"
+#define QLC_84XX_FW_FILE_NAME "84xx_fw.bin"
#define QLC_83XX_BOOT_FROM_FLASH 0
#define QLC_83XX_BOOT_FROM_FILE 0x12345678
+#define QLC_FW_FILE_NAME_LEN 20
#define QLC_83XX_MAX_RESET_SEQ_ENTRIES 16
#define QLC_83XX_MBX_POST_BC_OP 0x1
diff --git a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_init.c b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_init.c
index c97e2e0..f23e667 100644
--- a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_init.c
+++ b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_init.c
@@ -1948,12 +1948,36 @@
dev_err(&p_dev->pdev->dev, "%s: failed\n", __func__);
}
+static inline void qlcnic_83xx_get_fw_file_name(struct qlcnic_adapter *adapter,
+ char *file_name)
+{
+ struct pci_dev *pdev = adapter->pdev;
+
+ memset(file_name, 0, QLC_FW_FILE_NAME_LEN);
+
+ switch (pdev->device) {
+ case PCI_DEVICE_ID_QLOGIC_QLE834X:
+ strncpy(file_name, QLC_83XX_FW_FILE_NAME,
+ QLC_FW_FILE_NAME_LEN);
+ break;
+ case PCI_DEVICE_ID_QLOGIC_QLE844X:
+ strncpy(file_name, QLC_84XX_FW_FILE_NAME,
+ QLC_FW_FILE_NAME_LEN);
+ break;
+ default:
+ dev_err(&pdev->dev, "%s: Invalid device id\n",
+ __func__);
+ }
+}
+
static int qlcnic_83xx_load_fw_image_from_host(struct qlcnic_adapter *adapter)
{
+ char fw_file_name[QLC_FW_FILE_NAME_LEN];
int err = -EIO;
- if (request_firmware(&adapter->ahw->fw_info.fw,
- QLC_83XX_FW_FILE_NAME, &(adapter->pdev->dev))) {
+ qlcnic_83xx_get_fw_file_name(adapter, fw_file_name);
+ if (request_firmware(&adapter->ahw->fw_info.fw, fw_file_name,
+ &(adapter->pdev->dev))) {
dev_err(&adapter->pdev->dev,
"No file FW image, loading flash FW image.\n");
QLC_SHARED_REG_WR32(adapter, QLCNIC_FW_IMG_VALID,