tdfxfb: move I2C functionality into the tdfxfb
The I2C functionality provided by the i2c-voodoo3 driver is moved into the
tdfxfb (frame buffer driver for Voodoo3 cards). This way there is no
conflict between the i2c driver and the fb driver.
The tdfxfb does not make use from the DDC functionality yet but provides
all the functionality of the i2c-voodoo3 driver.
Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl>
Acked-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
diff --git a/drivers/video/tdfxfb.c b/drivers/video/tdfxfb.c
index ee64771..bc6f916 100644
--- a/drivers/video/tdfxfb.c
+++ b/drivers/video/tdfxfb.c
@@ -10,6 +10,12 @@
* Created : Thu Sep 23 18:17:43 1999, hmallat
* Last modified: Tue Nov 2 21:19:47 1999, hmallat
*
+ * I2C part copied from the i2c-voodoo3.c driver by:
+ * Frodo Looijaard <frodol@dds.nl>,
+ * Philip Edelbrock <phil@netroedge.com>,
+ * Ralph Metzler <rjkm@thp.uni-koeln.de>, and
+ * Mark D. Studebaker <mdsxyz123@yahoo.com>
+ *
* Lots of the information here comes from the Daryll Strauss' Banshee
* patches to the XF86 server, and the rest comes from the 3dfx
* Banshee specification. I'm very much indebted to Daryll for his
@@ -1167,6 +1173,190 @@
#endif
};
+#ifdef CONFIG_FB_3DFX_I2C
+/* The voo GPIO registers don't have individual masks for each bit
+ so we always have to read before writing. */
+
+static void tdfxfb_i2c_setscl(void *data, int val)
+{
+ struct tdfxfb_i2c_chan *chan = data;
+ struct tdfx_par *par = chan->par;
+ unsigned int r;
+
+ r = tdfx_inl(par, VIDSERPARPORT);
+ if (val)
+ r |= I2C_SCL_OUT;
+ else
+ r &= ~I2C_SCL_OUT;
+ tdfx_outl(par, VIDSERPARPORT, r);
+ tdfx_inl(par, VIDSERPARPORT); /* flush posted write */
+}
+
+static void tdfxfb_i2c_setsda(void *data, int val)
+{
+ struct tdfxfb_i2c_chan *chan = data;
+ struct tdfx_par *par = chan->par;
+ unsigned int r;
+
+ r = tdfx_inl(par, VIDSERPARPORT);
+ if (val)
+ r |= I2C_SDA_OUT;
+ else
+ r &= ~I2C_SDA_OUT;
+ tdfx_outl(par, VIDSERPARPORT, r);
+ tdfx_inl(par, VIDSERPARPORT); /* flush posted write */
+}
+
+/* The GPIO pins are open drain, so the pins always remain outputs.
+ We rely on the i2c-algo-bit routines to set the pins high before
+ reading the input from other chips. */
+
+static int tdfxfb_i2c_getscl(void *data)
+{
+ struct tdfxfb_i2c_chan *chan = data;
+ struct tdfx_par *par = chan->par;
+
+ return (0 != (tdfx_inl(par, VIDSERPARPORT) & I2C_SCL_IN));
+}
+
+static int tdfxfb_i2c_getsda(void *data)
+{
+ struct tdfxfb_i2c_chan *chan = data;
+ struct tdfx_par *par = chan->par;
+
+ return (0 != (tdfx_inl(par, VIDSERPARPORT) & I2C_SDA_IN));
+}
+
+static void tdfxfb_ddc_setscl(void *data, int val)
+{
+ struct tdfxfb_i2c_chan *chan = data;
+ struct tdfx_par *par = chan->par;
+ unsigned int r;
+
+ r = tdfx_inl(par, VIDSERPARPORT);
+ if (val)
+ r |= DDC_SCL_OUT;
+ else
+ r &= ~DDC_SCL_OUT;
+ tdfx_outl(par, VIDSERPARPORT, r);
+ tdfx_inl(par, VIDSERPARPORT); /* flush posted write */
+}
+
+static void tdfxfb_ddc_setsda(void *data, int val)
+{
+ struct tdfxfb_i2c_chan *chan = data;
+ struct tdfx_par *par = chan->par;
+ unsigned int r;
+
+ r = tdfx_inl(par, VIDSERPARPORT);
+ if (val)
+ r |= DDC_SDA_OUT;
+ else
+ r &= ~DDC_SDA_OUT;
+ tdfx_outl(par, VIDSERPARPORT, r);
+ tdfx_inl(par, VIDSERPARPORT); /* flush posted write */
+}
+
+static int tdfxfb_ddc_getscl(void *data)
+{
+ struct tdfxfb_i2c_chan *chan = data;
+ struct tdfx_par *par = chan->par;
+
+ return (0 != (tdfx_inl(par, VIDSERPARPORT) & DDC_SCL_IN));
+}
+
+static int tdfxfb_ddc_getsda(void *data)
+{
+ struct tdfxfb_i2c_chan *chan = data;
+ struct tdfx_par *par = chan->par;
+
+ return (0 != (tdfx_inl(par, VIDSERPARPORT) & DDC_SDA_IN));
+}
+
+static int __devinit tdfxfb_setup_ddc_bus(struct tdfxfb_i2c_chan *chan,
+ const char *name, struct device *dev)
+{
+ int rc;
+
+ strlcpy(chan->adapter.name, name, sizeof(chan->adapter.name));
+ chan->adapter.owner = THIS_MODULE;
+ chan->adapter.class = I2C_CLASS_DDC;
+ chan->adapter.algo_data = &chan->algo;
+ chan->adapter.dev.parent = dev;
+ chan->algo.setsda = tdfxfb_ddc_setsda;
+ chan->algo.setscl = tdfxfb_ddc_setscl;
+ chan->algo.getsda = tdfxfb_ddc_getsda;
+ chan->algo.getscl = tdfxfb_ddc_getscl;
+ chan->algo.udelay = 10;
+ chan->algo.timeout = msecs_to_jiffies(500);
+ chan->algo.data = chan;
+
+ i2c_set_adapdata(&chan->adapter, chan);
+
+ rc = i2c_bit_add_bus(&chan->adapter);
+ if (rc == 0)
+ DPRINTK("I2C bus %s registered.\n", name);
+ else
+ chan->par = NULL;
+
+ return rc;
+}
+
+static int __devinit tdfxfb_setup_i2c_bus(struct tdfxfb_i2c_chan *chan,
+ const char *name, struct device *dev)
+{
+ int rc;
+
+ strlcpy(chan->adapter.name, name, sizeof(chan->adapter.name));
+ chan->adapter.owner = THIS_MODULE;
+ chan->adapter.class = I2C_CLASS_TV_ANALOG;
+ chan->adapter.algo_data = &chan->algo;
+ chan->adapter.dev.parent = dev;
+ chan->algo.setsda = tdfxfb_i2c_setsda;
+ chan->algo.setscl = tdfxfb_i2c_setscl;
+ chan->algo.getsda = tdfxfb_i2c_getsda;
+ chan->algo.getscl = tdfxfb_i2c_getscl;
+ chan->algo.udelay = 10;
+ chan->algo.timeout = msecs_to_jiffies(500);
+ chan->algo.data = chan;
+
+ i2c_set_adapdata(&chan->adapter, chan);
+
+ rc = i2c_bit_add_bus(&chan->adapter);
+ if (rc == 0)
+ DPRINTK("I2C bus %s registered.\n", name);
+ else
+ chan->par = NULL;
+
+ return rc;
+}
+
+static void __devinit tdfxfb_create_i2c_busses(struct fb_info *info)
+{
+ struct tdfx_par *par = info->par;
+
+ tdfx_outl(par, VIDINFORMAT, 0x8160);
+ tdfx_outl(par, VIDSERPARPORT, 0xcffc0020);
+
+ par->chan[0].par = par;
+ par->chan[1].par = par;
+
+ tdfxfb_setup_ddc_bus(&par->chan[0], "Voodoo3-DDC", info->dev);
+ tdfxfb_setup_i2c_bus(&par->chan[1], "Voodoo3-I2C", info->dev);
+}
+
+static void tdfxfb_delete_i2c_busses(struct tdfx_par *par)
+{
+ if (par->chan[0].par)
+ i2c_del_adapter(&par->chan[0].adapter);
+ par->chan[0].par = NULL;
+
+ if (par->chan[1].par)
+ i2c_del_adapter(&par->chan[1].adapter);
+ par->chan[1].par = NULL;
+}
+#endif /* CONFIG_FB_3DFX_I2C */
+
/**
* tdfxfb_probe - Device Initializiation
*
@@ -1284,7 +1474,9 @@
if (hwcursor)
info->fix.smem_len = (info->fix.smem_len - 1024) &
(PAGE_MASK << 1);
-
+#ifdef CONFIG_FB_3DFX_I2C
+ tdfxfb_create_i2c_busses(info);
+#endif
if (!mode_option)
mode_option = "640x480@60";
@@ -1315,6 +1507,9 @@
return 0;
out_err_iobase:
+#ifdef CONFIG_FB_3DFX_I2C
+ tdfxfb_delete_i2c_busses(default_par);
+#endif
if (default_par->mtrr_handle >= 0)
mtrr_del(default_par->mtrr_handle, info->fix.smem_start,
info->fix.smem_len);
@@ -1379,6 +1574,9 @@
struct tdfx_par *par = info->par;
unregister_framebuffer(info);
+#ifdef CONFIG_FB_3DFX_I2C
+ tdfxfb_delete_i2c_busses(par);
+#endif
if (par->mtrr_handle >= 0)
mtrr_del(par->mtrr_handle, info->fix.smem_start,
info->fix.smem_len);