include/linux/suspend.h - kernel/msm-4.9 - Gitiles

 #ifndef _LINUX_SUSPEND_H
 #define _LINUX_SUSPEND_H

 #if defined(CONFIG_X86) || defined(CONFIG_FRV) || defined(CONFIG_PPC32) || defined(CONFIG_PPC64)
 #include <asm/suspend.h>
 #endif
 #include <linux/swap.h>
 #include <linux/notifier.h>
 #include <linux/init.h>
 #include <linux/pm.h>
 #include <linux/mm.h>
 #include <asm/errno.h>

 #if defined(CONFIG_PM_SLEEP) && defined(CONFIG_VT) && defined(CONFIG_VT_CONSOLE)
 extern void pm_set_vt_switch(int);
 extern int pm_prepare_console(void);
 extern void pm_restore_console(void);
 #else
 static inline void pm_set_vt_switch(int do_switch)
 {
 }

 static inline int pm_prepare_console(void)
 {
 	return 0;
 }

 static inline void pm_restore_console(void)
 {
 }
 #endif

 typedef int __bitwise suspend_state_t;

 #define PM_SUSPEND_ON		((__force suspend_state_t) 0)
 #define PM_SUSPEND_STANDBY	((__force suspend_state_t) 1)
 #define PM_SUSPEND_MEM		((__force suspend_state_t) 3)
 #define PM_SUSPEND_MAX		((__force suspend_state_t) 4)

 /**
  * struct platform_suspend_ops - Callbacks for managing platform dependent
  *	system sleep states.
  *
  * @valid: Callback to determine if given system sleep state is supported by
  *	the platform.
  *	Valid (ie. supported) states are advertised in /sys/power/state.  Note
  *	that it still may be impossible to enter given system sleep state if the
  *	conditions aren't right.
  *	There is the %suspend_valid_only_mem function available that can be
  *	assigned to this if the platform only supports mem sleep.
  *
  * @begin: Initialise a transition to given system sleep state.
  *	@begin() is executed right prior to suspending devices.  The information
  *	conveyed to the platform code by @begin() should be disregarded by it as
  *	soon as @end() is executed.  If @begin() fails (ie. returns nonzero),
  *	@prepare(), @enter() and @finish() will not be called by the PM core.
  *	This callback is optional.  However, if it is implemented, the argument
  *	passed to @enter() is redundant and should be ignored.
  *
  * @prepare: Prepare the platform for entering the system sleep state indicated
  *	by @begin().
  *	@prepare() is called right after devices have been suspended (ie. the
  *	appropriate .suspend() method has been executed for each device) and
  *	before the nonboot CPUs are disabled (it is executed with IRQs enabled).
  *	This callback is optional.  It returns 0 on success or a negative
  *	error code otherwise, in which case the system cannot enter the desired
  *	sleep state (@enter() and @finish() will not be called in that case).
  *
  * @enter: Enter the system sleep state indicated by @begin() or represented by
  *	the argument if @begin() is not implemented.
  *	This callback is mandatory.  It returns 0 on success or a negative
  *	error code otherwise, in which case the system cannot enter the desired
  *	sleep state.
  *
  * @finish: Called when the system has just left a sleep state, right after
  *	the nonboot CPUs have been enabled and before devices are resumed (it is
  *	executed with IRQs enabled).
  *	This callback is optional, but should be implemented by the platforms
  *	that implement @prepare().  If implemented, it is always called after
  *	@enter() (even if @enter() fails).
  *
  * @end: Called by the PM core right after resuming devices, to indicate to
  *	the platform that the system has returned to the working state or
  *	the transition to the sleep state has been aborted.
  *	This callback is optional, but should be implemented by the platforms
  *	that implement @begin(), but platforms implementing @begin() should
  *	also provide a @end() which cleans up transitions aborted before
  *	@enter().
  *
  * @recover: Recover the platform from a suspend failure.
  *	Called by the PM core if the suspending of devices fails.
  *	This callback is optional and should only be implemented by platforms
  *	which require special recovery actions in that situation.
  */
 struct platform_suspend_ops {
 	int (*valid)(suspend_state_t state);
 	int (*begin)(suspend_state_t state);
 	int (*prepare)(void);
 	int (*enter)(suspend_state_t state);
 	void (*finish)(void);
 	void (*end)(void);
 	void (*recover)(void);
 };

 #ifdef CONFIG_SUSPEND
 /**
  * suspend_set_ops - set platform dependent suspend operations
  * @ops: The new suspend operations to set.
  */
 extern void suspend_set_ops(struct platform_suspend_ops *ops);
 extern int suspend_valid_only_mem(suspend_state_t state);

 /**
  * arch_suspend_disable_irqs - disable IRQs for suspend
  *
  * Disables IRQs (in the default case). This is a weak symbol in the common
  * code and thus allows architectures to override it if more needs to be
  * done. Not called for suspend to disk.
  */
 extern void arch_suspend_disable_irqs(void);

 /**
  * arch_suspend_enable_irqs - enable IRQs after suspend
  *
  * Enables IRQs (in the default case). This is a weak symbol in the common
  * code and thus allows architectures to override it if more needs to be
  * done. Not called for suspend to disk.
  */
 extern void arch_suspend_enable_irqs(void);

 extern int pm_suspend(suspend_state_t state);
 #else /* !CONFIG_SUSPEND */
 #define suspend_valid_only_mem	NULL

 static inline void suspend_set_ops(struct platform_suspend_ops *ops) {}
 static inline int pm_suspend(suspend_state_t state) { return -ENOSYS; }
 #endif /* !CONFIG_SUSPEND */

 /* struct pbe is used for creating lists of pages that should be restored
  * atomically during the resume from disk, because the page frames they have
  * occupied before the suspend are in use.
  */
 struct pbe {
 	void *address;		/* address of the copy */
 	void *orig_address;	/* original address of a page */
 	struct pbe *next;
 };

 /* mm/page_alloc.c */
 extern void mark_free_pages(struct zone *zone);

 /**
  * struct platform_hibernation_ops - hibernation platform support
  *
  * The methods in this structure allow a platform to carry out special
  * operations required by it during a hibernation transition.
  *
  * All the methods below, except for @recover(), must be implemented.
  *
  * @begin: Tell the platform driver that we're starting hibernation.
  *	Called right after shrinking memory and before freezing devices.
  *
  * @end: Called by the PM core right after resuming devices, to indicate to
  *	the platform that the system has returned to the working state.
  *
  * @pre_snapshot: Prepare the platform for creating the hibernation image.
  *	Called right after devices have been frozen and before the nonboot
  *	CPUs are disabled (runs with IRQs on).
  *
  * @finish: Restore the previous state of the platform after the hibernation
  *	image has been created *or* put the platform into the normal operation
  *	mode after the hibernation (the same method is executed in both cases).
  *	Called right after the nonboot CPUs have been enabled and before
  *	thawing devices (runs with IRQs on).
  *
  * @prepare: Prepare the platform for entering the low power state.
  *	Called right after the hibernation image has been saved and before
  *	devices are prepared for entering the low power state.
  *
  * @enter: Put the system into the low power state after the hibernation image
  *	has been saved to disk.
  *	Called after the nonboot CPUs have been disabled and all of the low
  *	level devices have been shut down (runs with IRQs off).
  *
  * @leave: Perform the first stage of the cleanup after the system sleep state
  *	indicated by @set_target() has been left.
  *	Called right after the control has been passed from the boot kernel to
  *	the image kernel, before the nonboot CPUs are enabled and before devices
  *	are resumed.  Executed with interrupts disabled.
  *
  * @pre_restore: Prepare system for the restoration from a hibernation image.
  *	Called right after devices have been frozen and before the nonboot
  *	CPUs are disabled (runs with IRQs on).
  *
  * @restore_cleanup: Clean up after a failing image restoration.
  *	Called right after the nonboot CPUs have been enabled and before
  *	thawing devices (runs with IRQs on).
  *
  * @recover: Recover the platform from a failure to suspend devices.
  *	Called by the PM core if the suspending of devices during hibernation
  *	fails.  This callback is optional and should only be implemented by
  *	platforms which require special recovery actions in that situation.
  */
 struct platform_hibernation_ops {
 	int (*begin)(void);
 	void (*end)(void);
 	int (*pre_snapshot)(void);
 	void (*finish)(void);
 	int (*prepare)(void);
 	int (*enter)(void);
 	void (*leave)(void);
 	int (*pre_restore)(void);
 	void (*restore_cleanup)(void);
 	void (*recover)(void);
 };

 #ifdef CONFIG_HIBERNATION
 /* kernel/power/snapshot.c */
 extern void __register_nosave_region(unsigned long b, unsigned long e, int km);
 static inline void __init register_nosave_region(unsigned long b, unsigned long e)
 {
 	__register_nosave_region(b, e, 0);
 }
 static inline void __init register_nosave_region_late(unsigned long b, unsigned long e)
 {
 	__register_nosave_region(b, e, 1);
 }
 extern int swsusp_page_is_forbidden(struct page *);
 extern void swsusp_set_page_free(struct page *);
 extern void swsusp_unset_page_free(struct page *);
 extern unsigned long get_safe_page(gfp_t gfp_mask);

 extern void hibernation_set_ops(struct platform_hibernation_ops *ops);
 extern int hibernate(void);
 extern int hibernate_nvs_register(unsigned long start, unsigned long size);
 extern int hibernate_nvs_alloc(void);
 extern void hibernate_nvs_free(void);
 extern void hibernate_nvs_save(void);
 extern void hibernate_nvs_restore(void);
 #else /* CONFIG_HIBERNATION */
 static inline int swsusp_page_is_forbidden(struct page *p) { return 0; }
 static inline void swsusp_set_page_free(struct page *p) {}
 static inline void swsusp_unset_page_free(struct page *p) {}

 static inline void hibernation_set_ops(struct platform_hibernation_ops *ops) {}
 static inline int hibernate(void) { return -ENOSYS; }
 static inline int hibernate_nvs_register(unsigned long a, unsigned long b)
 {
 	return 0;
 }
 static inline int hibernate_nvs_alloc(void) { return 0; }
 static inline void hibernate_nvs_free(void) {}
 static inline void hibernate_nvs_save(void) {}
 static inline void hibernate_nvs_restore(void) {}
 #endif /* CONFIG_HIBERNATION */

 #ifdef CONFIG_PM_SLEEP
 void save_processor_state(void);
 void restore_processor_state(void);

 /* kernel/power/main.c */
 extern int register_pm_notifier(struct notifier_block *nb);
 extern int unregister_pm_notifier(struct notifier_block *nb);

 #define pm_notifier(fn, pri) {				\
 	static struct notifier_block fn##_nb =			\
 		{ .notifier_call = fn, .priority = pri };	\
 	register_pm_notifier(&fn##_nb);			\
 }
 #else /* !CONFIG_PM_SLEEP */

 static inline int register_pm_notifier(struct notifier_block *nb)
 {
 	return 0;
 }

 static inline int unregister_pm_notifier(struct notifier_block *nb)
 {
 	return 0;
 }

 #define pm_notifier(fn, pri)	do { (void)(fn); } while (0)
 #endif /* !CONFIG_PM_SLEEP */

 #ifndef CONFIG_HIBERNATION
 static inline void register_nosave_region(unsigned long b, unsigned long e)
 {
 }
 static inline void register_nosave_region_late(unsigned long b, unsigned long e)
 {
 }
 #endif

 extern struct mutex pm_mutex;

 #endif /* _LINUX_SUSPEND_H */
	#ifndef _LINUX_SUSPEND_H
	#define _LINUX_SUSPEND_H

	#if defined(CONFIG_X86) \|\| defined(CONFIG_FRV) \|\| defined(CONFIG_PPC32) \|\| defined(CONFIG_PPC64)
	#include <asm/suspend.h>
	#endif
	#include <linux/swap.h>
	#include <linux/notifier.h>
	#include <linux/init.h>
	#include <linux/pm.h>
	#include <linux/mm.h>
	#include <asm/errno.h>

	#if defined(CONFIG_PM_SLEEP) && defined(CONFIG_VT) && defined(CONFIG_VT_CONSOLE)
	extern void pm_set_vt_switch(int);
	extern int pm_prepare_console(void);
	extern void pm_restore_console(void);
	#else
	static inline void pm_set_vt_switch(int do_switch)
	{
	}

	static inline int pm_prepare_console(void)
	{
	return 0;
	}

	static inline void pm_restore_console(void)
	{
	}
	#endif

	typedef int __bitwise suspend_state_t;

	#define PM_SUSPEND_ON ((__force suspend_state_t) 0)
	#define PM_SUSPEND_STANDBY ((__force suspend_state_t) 1)
	#define PM_SUSPEND_MEM ((__force suspend_state_t) 3)
	#define PM_SUSPEND_MAX ((__force suspend_state_t) 4)

	/**
	* struct platform_suspend_ops - Callbacks for managing platform dependent
	* system sleep states.
	*
	* @valid: Callback to determine if given system sleep state is supported by
	* the platform.
	* Valid (ie. supported) states are advertised in /sys/power/state. Note
	* that it still may be impossible to enter given system sleep state if the
	* conditions aren't right.
	* There is the %suspend_valid_only_mem function available that can be
	* assigned to this if the platform only supports mem sleep.
	*
	* @begin: Initialise a transition to given system sleep state.
	* @begin() is executed right prior to suspending devices. The information
	* conveyed to the platform code by @begin() should be disregarded by it as
	* soon as @end() is executed. If @begin() fails (ie. returns nonzero),
	* @prepare(), @enter() and @finish() will not be called by the PM core.
	* This callback is optional. However, if it is implemented, the argument
	* passed to @enter() is redundant and should be ignored.
	*
	* @prepare: Prepare the platform for entering the system sleep state indicated
	* by @begin().
	* @prepare() is called right after devices have been suspended (ie. the
	* appropriate .suspend() method has been executed for each device) and
	* before the nonboot CPUs are disabled (it is executed with IRQs enabled).
	* This callback is optional. It returns 0 on success or a negative
	* error code otherwise, in which case the system cannot enter the desired
	* sleep state (@enter() and @finish() will not be called in that case).
	*
	* @enter: Enter the system sleep state indicated by @begin() or represented by
	* the argument if @begin() is not implemented.
	* This callback is mandatory. It returns 0 on success or a negative
	* error code otherwise, in which case the system cannot enter the desired
	* sleep state.
	*
	* @finish: Called when the system has just left a sleep state, right after
	* the nonboot CPUs have been enabled and before devices are resumed (it is
	* executed with IRQs enabled).
	* This callback is optional, but should be implemented by the platforms
	* that implement @prepare(). If implemented, it is always called after
	* @enter() (even if @enter() fails).
	*
	* @end: Called by the PM core right after resuming devices, to indicate to
	* the platform that the system has returned to the working state or
	* the transition to the sleep state has been aborted.
	* This callback is optional, but should be implemented by the platforms
	* that implement @begin(), but platforms implementing @begin() should
	* also provide a @end() which cleans up transitions aborted before
	* @enter().
	*
	* @recover: Recover the platform from a suspend failure.
	* Called by the PM core if the suspending of devices fails.
	* This callback is optional and should only be implemented by platforms
	* which require special recovery actions in that situation.
	*/
	struct platform_suspend_ops {
	int (*valid)(suspend_state_t state);
	int (*begin)(suspend_state_t state);
	int (*prepare)(void);
	int (*enter)(suspend_state_t state);
	void (*finish)(void);
	void (*end)(void);
	void (*recover)(void);
	};

	#ifdef CONFIG_SUSPEND
	/**
	* suspend_set_ops - set platform dependent suspend operations
	* @ops: The new suspend operations to set.
	*/
	extern void suspend_set_ops(struct platform_suspend_ops *ops);
	extern int suspend_valid_only_mem(suspend_state_t state);

	/**
	* arch_suspend_disable_irqs - disable IRQs for suspend
	*
	* Disables IRQs (in the default case). This is a weak symbol in the common
	* code and thus allows architectures to override it if more needs to be
	* done. Not called for suspend to disk.
	*/
	extern void arch_suspend_disable_irqs(void);

	/**
	* arch_suspend_enable_irqs - enable IRQs after suspend
	*
	* Enables IRQs (in the default case). This is a weak symbol in the common
	* code and thus allows architectures to override it if more needs to be
	* done. Not called for suspend to disk.
	*/
	extern void arch_suspend_enable_irqs(void);

	extern int pm_suspend(suspend_state_t state);
	#else /* !CONFIG_SUSPEND */
	#define suspend_valid_only_mem NULL

	static inline void suspend_set_ops(struct platform_suspend_ops *ops) {}
	static inline int pm_suspend(suspend_state_t state) { return -ENOSYS; }
	#endif /* !CONFIG_SUSPEND */

	/* struct pbe is used for creating lists of pages that should be restored
	* atomically during the resume from disk, because the page frames they have
	* occupied before the suspend are in use.
	*/
	struct pbe {
	void address; / address of the copy */
	void orig_address; / original address of a page */
	struct pbe *next;
	};

	/* mm/page_alloc.c */
	extern void mark_free_pages(struct zone *zone);

	/**
	* struct platform_hibernation_ops - hibernation platform support
	*
	* The methods in this structure allow a platform to carry out special
	* operations required by it during a hibernation transition.
	*
	* All the methods below, except for @recover(), must be implemented.
	*
	* @begin: Tell the platform driver that we're starting hibernation.
	* Called right after shrinking memory and before freezing devices.
	*
	* @end: Called by the PM core right after resuming devices, to indicate to
	* the platform that the system has returned to the working state.
	*
	* @pre_snapshot: Prepare the platform for creating the hibernation image.
	* Called right after devices have been frozen and before the nonboot
	* CPUs are disabled (runs with IRQs on).
	*
	* @finish: Restore the previous state of the platform after the hibernation
	* image has been created or put the platform into the normal operation
	* mode after the hibernation (the same method is executed in both cases).
	* Called right after the nonboot CPUs have been enabled and before
	* thawing devices (runs with IRQs on).
	*
	* @prepare: Prepare the platform for entering the low power state.
	* Called right after the hibernation image has been saved and before
	* devices are prepared for entering the low power state.
	*
	* @enter: Put the system into the low power state after the hibernation image
	* has been saved to disk.
	* Called after the nonboot CPUs have been disabled and all of the low
	* level devices have been shut down (runs with IRQs off).
	*
	* @leave: Perform the first stage of the cleanup after the system sleep state
	* indicated by @set_target() has been left.
	* Called right after the control has been passed from the boot kernel to
	* the image kernel, before the nonboot CPUs are enabled and before devices
	* are resumed. Executed with interrupts disabled.
	*
	* @pre_restore: Prepare system for the restoration from a hibernation image.
	* Called right after devices have been frozen and before the nonboot
	* CPUs are disabled (runs with IRQs on).
	*
	* @restore_cleanup: Clean up after a failing image restoration.
	* Called right after the nonboot CPUs have been enabled and before
	* thawing devices (runs with IRQs on).
	*
	* @recover: Recover the platform from a failure to suspend devices.
	* Called by the PM core if the suspending of devices during hibernation
	* fails. This callback is optional and should only be implemented by
	* platforms which require special recovery actions in that situation.
	*/
	struct platform_hibernation_ops {
	int (*begin)(void);
	void (*end)(void);
	int (*pre_snapshot)(void);
	void (*finish)(void);
	int (*prepare)(void);
	int (*enter)(void);
	void (*leave)(void);
	int (*pre_restore)(void);
	void (*restore_cleanup)(void);
	void (*recover)(void);
	};

	#ifdef CONFIG_HIBERNATION
	/* kernel/power/snapshot.c */
	extern void __register_nosave_region(unsigned long b, unsigned long e, int km);
	static inline void __init register_nosave_region(unsigned long b, unsigned long e)
	{
	__register_nosave_region(b, e, 0);
	}
	static inline void __init register_nosave_region_late(unsigned long b, unsigned long e)
	{
	__register_nosave_region(b, e, 1);
	}
	extern int swsusp_page_is_forbidden(struct page *);
	extern void swsusp_set_page_free(struct page *);
	extern void swsusp_unset_page_free(struct page *);
	extern unsigned long get_safe_page(gfp_t gfp_mask);

	extern void hibernation_set_ops(struct platform_hibernation_ops *ops);
	extern int hibernate(void);
	extern int hibernate_nvs_register(unsigned long start, unsigned long size);
	extern int hibernate_nvs_alloc(void);
	extern void hibernate_nvs_free(void);
	extern void hibernate_nvs_save(void);
	extern void hibernate_nvs_restore(void);
	#else /* CONFIG_HIBERNATION */
	static inline int swsusp_page_is_forbidden(struct page *p) { return 0; }
	static inline void swsusp_set_page_free(struct page *p) {}
	static inline void swsusp_unset_page_free(struct page *p) {}

	static inline void hibernation_set_ops(struct platform_hibernation_ops *ops) {}
	static inline int hibernate(void) { return -ENOSYS; }
	static inline int hibernate_nvs_register(unsigned long a, unsigned long b)
	{
	return 0;
	}
	static inline int hibernate_nvs_alloc(void) { return 0; }
	static inline void hibernate_nvs_free(void) {}
	static inline void hibernate_nvs_save(void) {}
	static inline void hibernate_nvs_restore(void) {}
	#endif /* CONFIG_HIBERNATION */

	#ifdef CONFIG_PM_SLEEP
	void save_processor_state(void);
	void restore_processor_state(void);

	/* kernel/power/main.c */
	extern int register_pm_notifier(struct notifier_block *nb);
	extern int unregister_pm_notifier(struct notifier_block *nb);

	#define pm_notifier(fn, pri) { \
	static struct notifier_block fn##_nb = \
	{ .notifier_call = fn, .priority = pri }; \
	register_pm_notifier(&fn##_nb); \
	}
	#else /* !CONFIG_PM_SLEEP */

	static inline int register_pm_notifier(struct notifier_block *nb)
	{
	return 0;
	}

	static inline int unregister_pm_notifier(struct notifier_block *nb)
	{
	return 0;
	}

	#define pm_notifier(fn, pri) do { (void)(fn); } while (0)
	#endif /* !CONFIG_PM_SLEEP */

	#ifndef CONFIG_HIBERNATION
	static inline void register_nosave_region(unsigned long b, unsigned long e)
	{
	}
	static inline void register_nosave_region_late(unsigned long b, unsigned long e)
	{
	}
	#endif

	extern struct mutex pm_mutex;

	#endif /* _LINUX_SUSPEND_H */