diff --git a/drivers/video/arcfb.c b/drivers/video/arcfb.c
index c22e8d3..a1d58e9 100644
--- a/drivers/video/arcfb.c
+++ b/drivers/video/arcfb.c
@@ -336,8 +336,8 @@
 }
 
 /*
- * here we start the process of spliting out the fb update into
- * individual blocks of pixels. we end up spliting into 64x64 blocks
+ * here we start the process of splitting out the fb update into
+ * individual blocks of pixels. we end up splitting into 64x64 blocks
  * and finally down to 64x8 pages.
  */
 static void arcfb_lcd_update(struct arcfb_par *par, unsigned int dx,
diff --git a/drivers/video/atmel_lcdfb.c b/drivers/video/atmel_lcdfb.c
index d99505b..1505539 100644
--- a/drivers/video/atmel_lcdfb.c
+++ b/drivers/video/atmel_lcdfb.c
@@ -939,7 +939,7 @@
 		 * up a splash image.
 		 */
 	} else {
-		/* alocate memory buffer */
+		/* allocate memory buffer */
 		ret = atmel_lcdfb_alloc_video_memory(sinfo);
 		if (ret < 0) {
 			dev_err(dev, "cannot allocate framebuffer: %d\n", ret);
diff --git a/drivers/video/aty/atyfb_base.c b/drivers/video/aty/atyfb_base.c
index 622f12b..3f2e8c1 100644
--- a/drivers/video/aty/atyfb_base.c
+++ b/drivers/video/aty/atyfb_base.c
@@ -863,7 +863,7 @@
 
 	if ((xres > 1600) || (yres > 1200)) {
 		FAIL("MACH64 chips are designed for max 1600x1200\n"
-		     "select anoter resolution.");
+		     "select another resolution.");
 	}
 	h_sync_strt = h_disp + var->right_margin;
 	h_sync_end = h_sync_strt + var->hsync_len;
diff --git a/drivers/video/aty/radeon_base.c b/drivers/video/aty/radeon_base.c
index ce1506b..9e279ee 100644
--- a/drivers/video/aty/radeon_base.c
+++ b/drivers/video/aty/radeon_base.c
@@ -2018,7 +2018,7 @@
           if ((rinfo->family == CHIP_FAMILY_RS100) ||
               (rinfo->family == CHIP_FAMILY_RS200)) {
              /* This is to workaround the asic bug for RMX, some versions
-                of BIOS dosen't have this register initialized correctly.
+                of BIOS doesn't have this register initialized correctly.
              */
              OUTREGP(CRTC_MORE_CNTL, CRTC_H_CUTOFF_ACTIVE_EN,
                      ~CRTC_H_CUTOFF_ACTIVE_EN);
diff --git a/drivers/video/bfin_adv7393fb.c b/drivers/video/bfin_adv7393fb.c
index 1a268a2..633e9fe 100644
--- a/drivers/video/bfin_adv7393fb.c
+++ b/drivers/video/bfin_adv7393fb.c
@@ -58,7 +58,7 @@
  */
 
 static struct bfin_adv7393_fb_par {
-	/* structure holding blackfin / adv7393 paramters when
+	/* structure holding blackfin / adv7393 parameters when
 	   screen is blanked */
 	struct {
 		u8 Mode;	/* ntsc/pal/? */
diff --git a/drivers/video/cirrusfb.c b/drivers/video/cirrusfb.c
index 738c8ce..bc67d05 100644
--- a/drivers/video/cirrusfb.c
+++ b/drivers/video/cirrusfb.c
@@ -1611,7 +1611,7 @@
 	/* ext. display controls: ext.adr. wrap */
 	vga_wcrt(cinfo->regbase, CL_CRT1B, 0x02);
 
-	/* Set/Reset registes: - */
+	/* Set/Reset registers: - */
 	vga_wgfx(cinfo->regbase, VGA_GFX_SR_VALUE, 0x00);
 	/* Set/Reset enable: - */
 	vga_wgfx(cinfo->regbase, VGA_GFX_SR_ENABLE, 0x00);
diff --git a/drivers/video/exynos/exynos_dp_reg.c b/drivers/video/exynos/exynos_dp_reg.c
index 6548afa..7ddd67d 100644
--- a/drivers/video/exynos/exynos_dp_reg.c
+++ b/drivers/video/exynos/exynos_dp_reg.c
@@ -717,7 +717,7 @@
 
 			/*
 			 * If Rx sends defer, Tx sends only reads
-			 * request without sending addres
+			 * request without sending address
 			 */
 			if (!defer)
 				retval = exynos_dp_select_i2c_device(dp,
diff --git a/drivers/video/exynos/exynos_mipi_dsi.c b/drivers/video/exynos/exynos_mipi_dsi.c
index 557091d..115e1b0 100644
--- a/drivers/video/exynos/exynos_mipi_dsi.c
+++ b/drivers/video/exynos/exynos_mipi_dsi.c
@@ -104,7 +104,7 @@
 
 	/*
 	 * data from Display controller(FIMD) is transferred in video mode
-	 * but in case of command mode, all settigs is updated to registers.
+	 * but in case of command mode, all settings are updated to registers.
 	 */
 	exynos_mipi_dsi_stand_by(dsim, 1);
 }
diff --git a/drivers/video/i740fb.c b/drivers/video/i740fb.c
index fe574d8..ff3f880 100644
--- a/drivers/video/i740fb.c
+++ b/drivers/video/i740fb.c
@@ -497,7 +497,7 @@
 
 	mem = vxres * vyres * ((bpp + 1) / 8);
 	if (mem > info->screen_size) {
-		dev_err(info->device, "not enough video memory (%d KB requested, %ld KB avaliable)\n",
+		dev_err(info->device, "not enough video memory (%d KB requested, %ld KB available)\n",
 			mem >> 10, info->screen_size >> 10);
 		return -ENOMEM;
 	}
@@ -728,7 +728,7 @@
 	i740outreg_mask(par, VGA_SEQ_I, VGA_SEQ_CLOCK_MODE, 0x20, 0x20);
 
 	i740inb(par, 0x3DA);
-	i740outb(par, VGA_ATT_W, 0x00);	/* enable pallete access */
+	i740outb(par, VGA_ATT_W, 0x00);	/* enable palette access */
 }
 
 static void vga_unprotect(struct i740fb_par *par)
@@ -737,7 +737,7 @@
 	i740outreg_mask(par, VGA_SEQ_I, VGA_SEQ_CLOCK_MODE, 0, 0x20);
 
 	i740inb(par, 0x3DA);
-	i740outb(par, VGA_ATT_W, 0x20);	/* disable pallete access */
+	i740outb(par, VGA_ATT_W, 0x20);	/* disable palette access */
 }
 
 static int i740fb_set_par(struct fb_info *info)
diff --git a/drivers/video/s3c-fb.c b/drivers/video/s3c-fb.c
index f310516..e5331fc 100644
--- a/drivers/video/s3c-fb.c
+++ b/drivers/video/s3c-fb.c
@@ -189,7 +189,7 @@
 
 /**
  * struct s3c_fb - overall hardware state of the hardware
- * @slock: The spinlock protection for this data sturcture.
+ * @slock: The spinlock protection for this data sturucture.
  * @dev: The device that we bound to, for printing, etc.
  * @bus_clk: The clk (hclk) feeding our interface and possibly pixclk.
  * @lcd_clk: The clk (sclk) feeding pixclk.
diff --git a/drivers/video/savage/savagefb_driver.c b/drivers/video/savage/savagefb_driver.c
index cee7803..b4c2e21 100644
--- a/drivers/video/savage/savagefb_driver.c
+++ b/drivers/video/savage/savagefb_driver.c
@@ -662,7 +662,7 @@
 	vga_out8(0x3c4, 0x18, par);
 	reg->SR18 = vga_in8(0x3c5, par);
 
-	/* Save flat panel expansion regsters. */
+	/* Save flat panel expansion registers. */
 	if (par->chip == S3_SAVAGE_MX) {
 		int i;
 
@@ -815,7 +815,7 @@
 	vga_out8(0x3c4, 0x18, par);
 	vga_out8(0x3c5, reg->SR18, par);
 
-	/* Save flat panel expansion regsters. */
+	/* Save flat panel expansion registers. */
 	if (par->chip == S3_SAVAGE_MX) {
 		int i;
 
@@ -1318,7 +1318,7 @@
 	vga_out8(0x3c4, 0x15, par);
 	vga_out8(0x3c5, reg->SR15, par);
 
-	/* Restore flat panel expansion regsters. */
+	/* Restore flat panel expansion registers. */
 	if (par->chip == S3_SAVAGE_MX) {
 		int i;
 
diff --git a/drivers/video/smscufx.c b/drivers/video/smscufx.c
index 2e4c249..538e5ef 100644
--- a/drivers/video/smscufx.c
+++ b/drivers/video/smscufx.c
@@ -1002,7 +1002,7 @@
 	/* TODO: Help propose a standard fb.h ioctl to report mmap damage */
 	if (cmd == UFX_IOCTL_REPORT_DAMAGE) {
 		/* If we have a damage-aware client, turn fb_defio "off"
-		 * To avoid perf imact of unecessary page fault handling.
+		 * To avoid perf imact of unnecessary page fault handling.
 		 * Done by resetting the delay for this fb_info to a very
 		 * long period. Pages will become writable and stay that way.
 		 * Reset to normal value when all clients have closed this fb.
@@ -1466,7 +1466,7 @@
 	/* all FF's in the first 16 bytes indicates nothing is connected */
 	for (i = 0; i < 16; i++) {
 		if (edid[i] != 0xFF) {
-			pr_debug("edid data read succesfully");
+			pr_debug("edid data read successfully");
 			return EDID_LENGTH;
 		}
 	}
diff --git a/drivers/video/sunxvr500.c b/drivers/video/sunxvr500.c
index b9c2b94..eb931b8 100644
--- a/drivers/video/sunxvr500.c
+++ b/drivers/video/sunxvr500.c
@@ -12,7 +12,7 @@
 
 #include <asm/io.h>
 
-/* XXX This device has a 'dev-comm' property which aparently is
+/* XXX This device has a 'dev-comm' property which apparently is
  * XXX a pointer into the openfirmware's address space which is
  * XXX a shared area the kernel driver can use to keep OBP
  * XXX informed about the current resolution setting.  The idea