| /* |
| * f_ncm.c -- USB CDC Network (NCM) link function driver |
| * |
| * Copyright (C) 2010 Nokia Corporation |
| * Contact: Yauheni Kaliuta <yauheni.kaliuta@nokia.com> |
| * |
| * The driver borrows from f_ecm.c which is: |
| * |
| * Copyright (C) 2003-2005,2008 David Brownell |
| * Copyright (C) 2008 Nokia Corporation |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License as published by |
| * the Free Software Foundation; either version 2 of the License, or |
| * (at your option) any later version. |
| */ |
| |
| #include <linux/kernel.h> |
| #include <linux/module.h> |
| #include <linux/device.h> |
| #include <linux/etherdevice.h> |
| #include <linux/crc32.h> |
| |
| #include <linux/usb/cdc.h> |
| |
| #include "u_ether.h" |
| #include "u_ether_configfs.h" |
| #include "u_ncm.h" |
| |
| /* |
| * This function is a "CDC Network Control Model" (CDC NCM) Ethernet link. |
| * NCM is intended to be used with high-speed network attachments. |
| * |
| * Note that NCM requires the use of "alternate settings" for its data |
| * interface. This means that the set_alt() method has real work to do, |
| * and also means that a get_alt() method is required. |
| */ |
| |
| /* to trigger crc/non-crc ndp signature */ |
| |
| #define NCM_NDP_HDR_CRC_MASK 0x01000000 |
| #define NCM_NDP_HDR_CRC 0x01000000 |
| #define NCM_NDP_HDR_NOCRC 0x00000000 |
| |
| enum ncm_notify_state { |
| NCM_NOTIFY_NONE, /* don't notify */ |
| NCM_NOTIFY_CONNECT, /* issue CONNECT next */ |
| NCM_NOTIFY_SPEED, /* issue SPEED_CHANGE next */ |
| }; |
| |
| struct f_ncm { |
| struct gether port; |
| u8 ctrl_id, data_id; |
| |
| char ethaddr[14]; |
| |
| struct usb_ep *notify; |
| struct usb_request *notify_req; |
| u8 notify_state; |
| bool is_open; |
| |
| const struct ndp_parser_opts *parser_opts; |
| bool is_crc; |
| u32 ndp_sign; |
| |
| /* |
| * for notification, it is accessed from both |
| * callback and ethernet open/close |
| */ |
| spinlock_t lock; |
| |
| struct net_device *netdev; |
| |
| /* For multi-frame NDP TX */ |
| struct sk_buff *skb_tx_data; |
| struct sk_buff *skb_tx_ndp; |
| u16 ndp_dgram_count; |
| bool timer_force_tx; |
| struct tasklet_struct tx_tasklet; |
| struct hrtimer task_timer; |
| |
| bool timer_stopping; |
| }; |
| |
| static inline struct f_ncm *func_to_ncm(struct usb_function *f) |
| { |
| return container_of(f, struct f_ncm, port.func); |
| } |
| |
| /* peak (theoretical) bulk transfer rate in bits-per-second */ |
| static inline unsigned ncm_bitrate(struct usb_gadget *g) |
| { |
| if (gadget_is_dualspeed(g) && g->speed == USB_SPEED_HIGH) |
| return 13 * 512 * 8 * 1000 * 8; |
| else |
| return 19 * 64 * 1 * 1000 * 8; |
| } |
| |
| /*-------------------------------------------------------------------------*/ |
| |
| /* |
| * We cannot group frames so use just the minimal size which ok to put |
| * one max-size ethernet frame. |
| * If the host can group frames, allow it to do that, 16K is selected, |
| * because it's used by default by the current linux host driver |
| */ |
| #define NTB_DEFAULT_IN_SIZE 16384 |
| #define NTB_OUT_SIZE 16384 |
| |
| /* Allocation for storing the NDP, 32 should suffice for a |
| * 16k packet. This allows a maximum of 32 * 507 Byte packets to |
| * be transmitted in a single 16kB skb, though when sending full size |
| * packets this limit will be plenty. |
| * Smaller packets are not likely to be trying to maximize the |
| * throughput and will be mstly sending smaller infrequent frames. |
| */ |
| #define TX_MAX_NUM_DPE 32 |
| |
| /* Delay for the transmit to wait before sending an unfilled NTB frame. */ |
| #define TX_TIMEOUT_NSECS 300000 |
| |
| #define FORMATS_SUPPORTED (USB_CDC_NCM_NTB16_SUPPORTED | \ |
| USB_CDC_NCM_NTB32_SUPPORTED) |
| |
| static struct usb_cdc_ncm_ntb_parameters ntb_parameters = { |
| .wLength = cpu_to_le16(sizeof(ntb_parameters)), |
| .bmNtbFormatsSupported = cpu_to_le16(FORMATS_SUPPORTED), |
| .dwNtbInMaxSize = cpu_to_le32(NTB_DEFAULT_IN_SIZE), |
| .wNdpInDivisor = cpu_to_le16(4), |
| .wNdpInPayloadRemainder = cpu_to_le16(0), |
| .wNdpInAlignment = cpu_to_le16(4), |
| |
| .dwNtbOutMaxSize = cpu_to_le32(NTB_OUT_SIZE), |
| .wNdpOutDivisor = cpu_to_le16(4), |
| .wNdpOutPayloadRemainder = cpu_to_le16(0), |
| .wNdpOutAlignment = cpu_to_le16(4), |
| }; |
| |
| /* |
| * Use wMaxPacketSize big enough to fit CDC_NOTIFY_SPEED_CHANGE in one |
| * packet, to simplify cancellation; and a big transfer interval, to |
| * waste less bandwidth. |
| */ |
| |
| #define NCM_STATUS_INTERVAL_MS 32 |
| #define NCM_STATUS_BYTECOUNT 16 /* 8 byte header + data */ |
| |
| static struct usb_interface_assoc_descriptor ncm_iad_desc = { |
| .bLength = sizeof ncm_iad_desc, |
| .bDescriptorType = USB_DT_INTERFACE_ASSOCIATION, |
| |
| /* .bFirstInterface = DYNAMIC, */ |
| .bInterfaceCount = 2, /* control + data */ |
| .bFunctionClass = USB_CLASS_COMM, |
| .bFunctionSubClass = USB_CDC_SUBCLASS_NCM, |
| .bFunctionProtocol = USB_CDC_PROTO_NONE, |
| /* .iFunction = DYNAMIC */ |
| }; |
| |
| /* interface descriptor: */ |
| |
| static struct usb_interface_descriptor ncm_control_intf = { |
| .bLength = sizeof ncm_control_intf, |
| .bDescriptorType = USB_DT_INTERFACE, |
| |
| /* .bInterfaceNumber = DYNAMIC */ |
| .bNumEndpoints = 1, |
| .bInterfaceClass = USB_CLASS_COMM, |
| .bInterfaceSubClass = USB_CDC_SUBCLASS_NCM, |
| .bInterfaceProtocol = USB_CDC_PROTO_NONE, |
| /* .iInterface = DYNAMIC */ |
| }; |
| |
| static struct usb_cdc_header_desc ncm_header_desc = { |
| .bLength = sizeof ncm_header_desc, |
| .bDescriptorType = USB_DT_CS_INTERFACE, |
| .bDescriptorSubType = USB_CDC_HEADER_TYPE, |
| |
| .bcdCDC = cpu_to_le16(0x0110), |
| }; |
| |
| static struct usb_cdc_union_desc ncm_union_desc = { |
| .bLength = sizeof(ncm_union_desc), |
| .bDescriptorType = USB_DT_CS_INTERFACE, |
| .bDescriptorSubType = USB_CDC_UNION_TYPE, |
| /* .bMasterInterface0 = DYNAMIC */ |
| /* .bSlaveInterface0 = DYNAMIC */ |
| }; |
| |
| static struct usb_cdc_ether_desc ecm_desc = { |
| .bLength = sizeof ecm_desc, |
| .bDescriptorType = USB_DT_CS_INTERFACE, |
| .bDescriptorSubType = USB_CDC_ETHERNET_TYPE, |
| |
| /* this descriptor actually adds value, surprise! */ |
| /* .iMACAddress = DYNAMIC */ |
| .bmEthernetStatistics = cpu_to_le32(0), /* no statistics */ |
| .wMaxSegmentSize = cpu_to_le16(ETH_FRAME_LEN), |
| .wNumberMCFilters = cpu_to_le16(0), |
| .bNumberPowerFilters = 0, |
| }; |
| |
| #define NCAPS (USB_CDC_NCM_NCAP_ETH_FILTER | USB_CDC_NCM_NCAP_CRC_MODE) |
| |
| static struct usb_cdc_ncm_desc ncm_desc = { |
| .bLength = sizeof ncm_desc, |
| .bDescriptorType = USB_DT_CS_INTERFACE, |
| .bDescriptorSubType = USB_CDC_NCM_TYPE, |
| |
| .bcdNcmVersion = cpu_to_le16(0x0100), |
| /* can process SetEthernetPacketFilter */ |
| .bmNetworkCapabilities = NCAPS, |
| }; |
| |
| /* the default data interface has no endpoints ... */ |
| |
| static struct usb_interface_descriptor ncm_data_nop_intf = { |
| .bLength = sizeof ncm_data_nop_intf, |
| .bDescriptorType = USB_DT_INTERFACE, |
| |
| .bInterfaceNumber = 1, |
| .bAlternateSetting = 0, |
| .bNumEndpoints = 0, |
| .bInterfaceClass = USB_CLASS_CDC_DATA, |
| .bInterfaceSubClass = 0, |
| .bInterfaceProtocol = USB_CDC_NCM_PROTO_NTB, |
| /* .iInterface = DYNAMIC */ |
| }; |
| |
| /* ... but the "real" data interface has two bulk endpoints */ |
| |
| static struct usb_interface_descriptor ncm_data_intf = { |
| .bLength = sizeof ncm_data_intf, |
| .bDescriptorType = USB_DT_INTERFACE, |
| |
| .bInterfaceNumber = 1, |
| .bAlternateSetting = 1, |
| .bNumEndpoints = 2, |
| .bInterfaceClass = USB_CLASS_CDC_DATA, |
| .bInterfaceSubClass = 0, |
| .bInterfaceProtocol = USB_CDC_NCM_PROTO_NTB, |
| /* .iInterface = DYNAMIC */ |
| }; |
| |
| /* full speed support: */ |
| |
| static struct usb_endpoint_descriptor fs_ncm_notify_desc = { |
| .bLength = USB_DT_ENDPOINT_SIZE, |
| .bDescriptorType = USB_DT_ENDPOINT, |
| |
| .bEndpointAddress = USB_DIR_IN, |
| .bmAttributes = USB_ENDPOINT_XFER_INT, |
| .wMaxPacketSize = cpu_to_le16(NCM_STATUS_BYTECOUNT), |
| .bInterval = NCM_STATUS_INTERVAL_MS, |
| }; |
| |
| static struct usb_endpoint_descriptor fs_ncm_in_desc = { |
| .bLength = USB_DT_ENDPOINT_SIZE, |
| .bDescriptorType = USB_DT_ENDPOINT, |
| |
| .bEndpointAddress = USB_DIR_IN, |
| .bmAttributes = USB_ENDPOINT_XFER_BULK, |
| }; |
| |
| static struct usb_endpoint_descriptor fs_ncm_out_desc = { |
| .bLength = USB_DT_ENDPOINT_SIZE, |
| .bDescriptorType = USB_DT_ENDPOINT, |
| |
| .bEndpointAddress = USB_DIR_OUT, |
| .bmAttributes = USB_ENDPOINT_XFER_BULK, |
| }; |
| |
| static struct usb_descriptor_header *ncm_fs_function[] = { |
| (struct usb_descriptor_header *) &ncm_iad_desc, |
| /* CDC NCM control descriptors */ |
| (struct usb_descriptor_header *) &ncm_control_intf, |
| (struct usb_descriptor_header *) &ncm_header_desc, |
| (struct usb_descriptor_header *) &ncm_union_desc, |
| (struct usb_descriptor_header *) &ecm_desc, |
| (struct usb_descriptor_header *) &ncm_desc, |
| (struct usb_descriptor_header *) &fs_ncm_notify_desc, |
| /* data interface, altsettings 0 and 1 */ |
| (struct usb_descriptor_header *) &ncm_data_nop_intf, |
| (struct usb_descriptor_header *) &ncm_data_intf, |
| (struct usb_descriptor_header *) &fs_ncm_in_desc, |
| (struct usb_descriptor_header *) &fs_ncm_out_desc, |
| NULL, |
| }; |
| |
| /* high speed support: */ |
| |
| static struct usb_endpoint_descriptor hs_ncm_notify_desc = { |
| .bLength = USB_DT_ENDPOINT_SIZE, |
| .bDescriptorType = USB_DT_ENDPOINT, |
| |
| .bEndpointAddress = USB_DIR_IN, |
| .bmAttributes = USB_ENDPOINT_XFER_INT, |
| .wMaxPacketSize = cpu_to_le16(NCM_STATUS_BYTECOUNT), |
| .bInterval = USB_MS_TO_HS_INTERVAL(NCM_STATUS_INTERVAL_MS), |
| }; |
| static struct usb_endpoint_descriptor hs_ncm_in_desc = { |
| .bLength = USB_DT_ENDPOINT_SIZE, |
| .bDescriptorType = USB_DT_ENDPOINT, |
| |
| .bEndpointAddress = USB_DIR_IN, |
| .bmAttributes = USB_ENDPOINT_XFER_BULK, |
| .wMaxPacketSize = cpu_to_le16(512), |
| }; |
| |
| static struct usb_endpoint_descriptor hs_ncm_out_desc = { |
| .bLength = USB_DT_ENDPOINT_SIZE, |
| .bDescriptorType = USB_DT_ENDPOINT, |
| |
| .bEndpointAddress = USB_DIR_OUT, |
| .bmAttributes = USB_ENDPOINT_XFER_BULK, |
| .wMaxPacketSize = cpu_to_le16(512), |
| }; |
| |
| static struct usb_descriptor_header *ncm_hs_function[] = { |
| (struct usb_descriptor_header *) &ncm_iad_desc, |
| /* CDC NCM control descriptors */ |
| (struct usb_descriptor_header *) &ncm_control_intf, |
| (struct usb_descriptor_header *) &ncm_header_desc, |
| (struct usb_descriptor_header *) &ncm_union_desc, |
| (struct usb_descriptor_header *) &ecm_desc, |
| (struct usb_descriptor_header *) &ncm_desc, |
| (struct usb_descriptor_header *) &hs_ncm_notify_desc, |
| /* data interface, altsettings 0 and 1 */ |
| (struct usb_descriptor_header *) &ncm_data_nop_intf, |
| (struct usb_descriptor_header *) &ncm_data_intf, |
| (struct usb_descriptor_header *) &hs_ncm_in_desc, |
| (struct usb_descriptor_header *) &hs_ncm_out_desc, |
| NULL, |
| }; |
| |
| /* string descriptors: */ |
| |
| #define STRING_CTRL_IDX 0 |
| #define STRING_MAC_IDX 1 |
| #define STRING_DATA_IDX 2 |
| #define STRING_IAD_IDX 3 |
| |
| static struct usb_string ncm_string_defs[] = { |
| [STRING_CTRL_IDX].s = "CDC Network Control Model (NCM)", |
| [STRING_MAC_IDX].s = "", |
| [STRING_DATA_IDX].s = "CDC Network Data", |
| [STRING_IAD_IDX].s = "CDC NCM", |
| { } /* end of list */ |
| }; |
| |
| static struct usb_gadget_strings ncm_string_table = { |
| .language = 0x0409, /* en-us */ |
| .strings = ncm_string_defs, |
| }; |
| |
| static struct usb_gadget_strings *ncm_strings[] = { |
| &ncm_string_table, |
| NULL, |
| }; |
| |
| /* |
| * Here are options for NCM Datagram Pointer table (NDP) parser. |
| * There are 2 different formats: NDP16 and NDP32 in the spec (ch. 3), |
| * in NDP16 offsets and sizes fields are 1 16bit word wide, |
| * in NDP32 -- 2 16bit words wide. Also signatures are different. |
| * To make the parser code the same, put the differences in the structure, |
| * and switch pointers to the structures when the format is changed. |
| */ |
| |
| struct ndp_parser_opts { |
| u32 nth_sign; |
| u32 ndp_sign; |
| unsigned nth_size; |
| unsigned ndp_size; |
| unsigned dpe_size; |
| unsigned ndplen_align; |
| /* sizes in u16 units */ |
| unsigned dgram_item_len; /* index or length */ |
| unsigned block_length; |
| unsigned ndp_index; |
| unsigned reserved1; |
| unsigned reserved2; |
| unsigned next_ndp_index; |
| }; |
| |
| #define INIT_NDP16_OPTS { \ |
| .nth_sign = USB_CDC_NCM_NTH16_SIGN, \ |
| .ndp_sign = USB_CDC_NCM_NDP16_NOCRC_SIGN, \ |
| .nth_size = sizeof(struct usb_cdc_ncm_nth16), \ |
| .ndp_size = sizeof(struct usb_cdc_ncm_ndp16), \ |
| .dpe_size = sizeof(struct usb_cdc_ncm_dpe16), \ |
| .ndplen_align = 4, \ |
| .dgram_item_len = 1, \ |
| .block_length = 1, \ |
| .ndp_index = 1, \ |
| .reserved1 = 0, \ |
| .reserved2 = 0, \ |
| .next_ndp_index = 1, \ |
| } |
| |
| |
| #define INIT_NDP32_OPTS { \ |
| .nth_sign = USB_CDC_NCM_NTH32_SIGN, \ |
| .ndp_sign = USB_CDC_NCM_NDP32_NOCRC_SIGN, \ |
| .nth_size = sizeof(struct usb_cdc_ncm_nth32), \ |
| .ndp_size = sizeof(struct usb_cdc_ncm_ndp32), \ |
| .dpe_size = sizeof(struct usb_cdc_ncm_dpe32), \ |
| .ndplen_align = 8, \ |
| .dgram_item_len = 2, \ |
| .block_length = 2, \ |
| .ndp_index = 2, \ |
| .reserved1 = 1, \ |
| .reserved2 = 2, \ |
| .next_ndp_index = 2, \ |
| } |
| |
| static const struct ndp_parser_opts ndp16_opts = INIT_NDP16_OPTS; |
| static const struct ndp_parser_opts ndp32_opts = INIT_NDP32_OPTS; |
| |
| static inline void put_ncm(__le16 **p, unsigned size, unsigned val) |
| { |
| switch (size) { |
| case 1: |
| put_unaligned_le16((u16)val, *p); |
| break; |
| case 2: |
| put_unaligned_le32((u32)val, *p); |
| |
| break; |
| default: |
| BUG(); |
| } |
| |
| *p += size; |
| } |
| |
| static inline unsigned get_ncm(__le16 **p, unsigned size) |
| { |
| unsigned tmp; |
| |
| switch (size) { |
| case 1: |
| tmp = get_unaligned_le16(*p); |
| break; |
| case 2: |
| tmp = get_unaligned_le32(*p); |
| break; |
| default: |
| BUG(); |
| } |
| |
| *p += size; |
| return tmp; |
| } |
| |
| /*-------------------------------------------------------------------------*/ |
| |
| static inline void ncm_reset_values(struct f_ncm *ncm) |
| { |
| ncm->parser_opts = &ndp16_opts; |
| ncm->is_crc = false; |
| ncm->port.cdc_filter = DEFAULT_FILTER; |
| |
| /* doesn't make sense for ncm, fixed size used */ |
| ncm->port.header_len = 0; |
| |
| ncm->port.fixed_out_len = le32_to_cpu(ntb_parameters.dwNtbOutMaxSize); |
| ncm->port.fixed_in_len = NTB_DEFAULT_IN_SIZE; |
| } |
| |
| /* |
| * Context: ncm->lock held |
| */ |
| static void ncm_do_notify(struct f_ncm *ncm) |
| { |
| struct usb_request *req = ncm->notify_req; |
| struct usb_cdc_notification *event; |
| struct usb_composite_dev *cdev = ncm->port.func.config->cdev; |
| __le32 *data; |
| int status; |
| |
| /* notification already in flight? */ |
| if (!req) |
| return; |
| |
| event = req->buf; |
| switch (ncm->notify_state) { |
| case NCM_NOTIFY_NONE: |
| return; |
| |
| case NCM_NOTIFY_CONNECT: |
| event->bNotificationType = USB_CDC_NOTIFY_NETWORK_CONNECTION; |
| if (ncm->is_open) |
| event->wValue = cpu_to_le16(1); |
| else |
| event->wValue = cpu_to_le16(0); |
| event->wLength = 0; |
| req->length = sizeof *event; |
| |
| DBG(cdev, "notify connect %s\n", |
| ncm->is_open ? "true" : "false"); |
| ncm->notify_state = NCM_NOTIFY_NONE; |
| break; |
| |
| case NCM_NOTIFY_SPEED: |
| event->bNotificationType = USB_CDC_NOTIFY_SPEED_CHANGE; |
| event->wValue = cpu_to_le16(0); |
| event->wLength = cpu_to_le16(8); |
| req->length = NCM_STATUS_BYTECOUNT; |
| |
| /* SPEED_CHANGE data is up/down speeds in bits/sec */ |
| data = req->buf + sizeof *event; |
| data[0] = cpu_to_le32(ncm_bitrate(cdev->gadget)); |
| data[1] = data[0]; |
| |
| DBG(cdev, "notify speed %d\n", ncm_bitrate(cdev->gadget)); |
| ncm->notify_state = NCM_NOTIFY_CONNECT; |
| break; |
| } |
| event->bmRequestType = 0xA1; |
| event->wIndex = cpu_to_le16(ncm->ctrl_id); |
| |
| ncm->notify_req = NULL; |
| /* |
| * In double buffering if there is a space in FIFO, |
| * completion callback can be called right after the call, |
| * so unlocking |
| */ |
| spin_unlock(&ncm->lock); |
| status = usb_ep_queue(ncm->notify, req, GFP_ATOMIC); |
| spin_lock(&ncm->lock); |
| if (status < 0) { |
| ncm->notify_req = req; |
| DBG(cdev, "notify --> %d\n", status); |
| } |
| } |
| |
| /* |
| * Context: ncm->lock held |
| */ |
| static void ncm_notify(struct f_ncm *ncm) |
| { |
| /* |
| * NOTE on most versions of Linux, host side cdc-ethernet |
| * won't listen for notifications until its netdevice opens. |
| * The first notification then sits in the FIFO for a long |
| * time, and the second one is queued. |
| * |
| * If ncm_notify() is called before the second (CONNECT) |
| * notification is sent, then it will reset to send the SPEED |
| * notificaion again (and again, and again), but it's not a problem |
| */ |
| ncm->notify_state = NCM_NOTIFY_SPEED; |
| ncm_do_notify(ncm); |
| } |
| |
| static void ncm_notify_complete(struct usb_ep *ep, struct usb_request *req) |
| { |
| struct f_ncm *ncm = req->context; |
| struct usb_composite_dev *cdev = ncm->port.func.config->cdev; |
| struct usb_cdc_notification *event = req->buf; |
| |
| spin_lock(&ncm->lock); |
| switch (req->status) { |
| case 0: |
| VDBG(cdev, "Notification %02x sent\n", |
| event->bNotificationType); |
| break; |
| case -ECONNRESET: |
| case -ESHUTDOWN: |
| ncm->notify_state = NCM_NOTIFY_NONE; |
| break; |
| default: |
| DBG(cdev, "event %02x --> %d\n", |
| event->bNotificationType, req->status); |
| break; |
| } |
| ncm->notify_req = req; |
| ncm_do_notify(ncm); |
| spin_unlock(&ncm->lock); |
| } |
| |
| static void ncm_ep0out_complete(struct usb_ep *ep, struct usb_request *req) |
| { |
| /* now for SET_NTB_INPUT_SIZE only */ |
| unsigned in_size; |
| struct usb_function *f = req->context; |
| struct f_ncm *ncm = func_to_ncm(f); |
| struct usb_composite_dev *cdev = ep->driver_data; |
| |
| req->context = NULL; |
| if (req->status || req->actual != req->length) { |
| DBG(cdev, "Bad control-OUT transfer\n"); |
| goto invalid; |
| } |
| |
| in_size = get_unaligned_le32(req->buf); |
| if (in_size < USB_CDC_NCM_NTB_MIN_IN_SIZE || |
| in_size > le32_to_cpu(ntb_parameters.dwNtbInMaxSize)) { |
| DBG(cdev, "Got wrong INPUT SIZE (%d) from host\n", in_size); |
| goto invalid; |
| } |
| |
| ncm->port.fixed_in_len = in_size; |
| VDBG(cdev, "Set NTB INPUT SIZE %d\n", in_size); |
| return; |
| |
| invalid: |
| usb_ep_set_halt(ep); |
| return; |
| } |
| |
| static int ncm_setup(struct usb_function *f, const struct usb_ctrlrequest *ctrl) |
| { |
| struct f_ncm *ncm = func_to_ncm(f); |
| struct usb_composite_dev *cdev = f->config->cdev; |
| struct usb_request *req = cdev->req; |
| int value = -EOPNOTSUPP; |
| u16 w_index = le16_to_cpu(ctrl->wIndex); |
| u16 w_value = le16_to_cpu(ctrl->wValue); |
| u16 w_length = le16_to_cpu(ctrl->wLength); |
| |
| /* |
| * composite driver infrastructure handles everything except |
| * CDC class messages; interface activation uses set_alt(). |
| */ |
| switch ((ctrl->bRequestType << 8) | ctrl->bRequest) { |
| case ((USB_DIR_OUT | USB_TYPE_CLASS | USB_RECIP_INTERFACE) << 8) |
| | USB_CDC_SET_ETHERNET_PACKET_FILTER: |
| /* |
| * see 6.2.30: no data, wIndex = interface, |
| * wValue = packet filter bitmap |
| */ |
| if (w_length != 0 || w_index != ncm->ctrl_id) |
| goto invalid; |
| DBG(cdev, "packet filter %02x\n", w_value); |
| /* |
| * REVISIT locking of cdc_filter. This assumes the UDC |
| * driver won't have a concurrent packet TX irq running on |
| * another CPU; or that if it does, this write is atomic... |
| */ |
| ncm->port.cdc_filter = w_value; |
| value = 0; |
| break; |
| /* |
| * and optionally: |
| * case USB_CDC_SEND_ENCAPSULATED_COMMAND: |
| * case USB_CDC_GET_ENCAPSULATED_RESPONSE: |
| * case USB_CDC_SET_ETHERNET_MULTICAST_FILTERS: |
| * case USB_CDC_SET_ETHERNET_PM_PATTERN_FILTER: |
| * case USB_CDC_GET_ETHERNET_PM_PATTERN_FILTER: |
| * case USB_CDC_GET_ETHERNET_STATISTIC: |
| */ |
| |
| case ((USB_DIR_IN | USB_TYPE_CLASS | USB_RECIP_INTERFACE) << 8) |
| | USB_CDC_GET_NTB_PARAMETERS: |
| |
| if (w_length == 0 || w_value != 0 || w_index != ncm->ctrl_id) |
| goto invalid; |
| value = w_length > sizeof ntb_parameters ? |
| sizeof ntb_parameters : w_length; |
| memcpy(req->buf, &ntb_parameters, value); |
| VDBG(cdev, "Host asked NTB parameters\n"); |
| break; |
| |
| case ((USB_DIR_IN | USB_TYPE_CLASS | USB_RECIP_INTERFACE) << 8) |
| | USB_CDC_GET_NTB_INPUT_SIZE: |
| |
| if (w_length < 4 || w_value != 0 || w_index != ncm->ctrl_id) |
| goto invalid; |
| put_unaligned_le32(ncm->port.fixed_in_len, req->buf); |
| value = 4; |
| VDBG(cdev, "Host asked INPUT SIZE, sending %d\n", |
| ncm->port.fixed_in_len); |
| break; |
| |
| case ((USB_DIR_OUT | USB_TYPE_CLASS | USB_RECIP_INTERFACE) << 8) |
| | USB_CDC_SET_NTB_INPUT_SIZE: |
| { |
| if (w_length != 4 || w_value != 0 || w_index != ncm->ctrl_id) |
| goto invalid; |
| req->complete = ncm_ep0out_complete; |
| req->length = w_length; |
| req->context = f; |
| |
| value = req->length; |
| break; |
| } |
| |
| case ((USB_DIR_IN | USB_TYPE_CLASS | USB_RECIP_INTERFACE) << 8) |
| | USB_CDC_GET_NTB_FORMAT: |
| { |
| uint16_t format; |
| |
| if (w_length < 2 || w_value != 0 || w_index != ncm->ctrl_id) |
| goto invalid; |
| format = (ncm->parser_opts == &ndp16_opts) ? 0x0000 : 0x0001; |
| put_unaligned_le16(format, req->buf); |
| value = 2; |
| VDBG(cdev, "Host asked NTB FORMAT, sending %d\n", format); |
| break; |
| } |
| |
| case ((USB_DIR_OUT | USB_TYPE_CLASS | USB_RECIP_INTERFACE) << 8) |
| | USB_CDC_SET_NTB_FORMAT: |
| { |
| if (w_length != 0 || w_index != ncm->ctrl_id) |
| goto invalid; |
| switch (w_value) { |
| case 0x0000: |
| ncm->parser_opts = &ndp16_opts; |
| DBG(cdev, "NCM16 selected\n"); |
| break; |
| case 0x0001: |
| ncm->parser_opts = &ndp32_opts; |
| DBG(cdev, "NCM32 selected\n"); |
| break; |
| default: |
| goto invalid; |
| } |
| value = 0; |
| break; |
| } |
| case ((USB_DIR_IN | USB_TYPE_CLASS | USB_RECIP_INTERFACE) << 8) |
| | USB_CDC_GET_CRC_MODE: |
| { |
| uint16_t is_crc; |
| |
| if (w_length < 2 || w_value != 0 || w_index != ncm->ctrl_id) |
| goto invalid; |
| is_crc = ncm->is_crc ? 0x0001 : 0x0000; |
| put_unaligned_le16(is_crc, req->buf); |
| value = 2; |
| VDBG(cdev, "Host asked CRC MODE, sending %d\n", is_crc); |
| break; |
| } |
| |
| case ((USB_DIR_OUT | USB_TYPE_CLASS | USB_RECIP_INTERFACE) << 8) |
| | USB_CDC_SET_CRC_MODE: |
| { |
| int ndp_hdr_crc = 0; |
| |
| if (w_length != 0 || w_index != ncm->ctrl_id) |
| goto invalid; |
| switch (w_value) { |
| case 0x0000: |
| ncm->is_crc = false; |
| ndp_hdr_crc = NCM_NDP_HDR_NOCRC; |
| DBG(cdev, "non-CRC mode selected\n"); |
| break; |
| case 0x0001: |
| ncm->is_crc = true; |
| ndp_hdr_crc = NCM_NDP_HDR_CRC; |
| DBG(cdev, "CRC mode selected\n"); |
| break; |
| default: |
| goto invalid; |
| } |
| ncm->ndp_sign = ncm->parser_opts->ndp_sign | ndp_hdr_crc; |
| value = 0; |
| break; |
| } |
| |
| /* and disabled in ncm descriptor: */ |
| /* case USB_CDC_GET_NET_ADDRESS: */ |
| /* case USB_CDC_SET_NET_ADDRESS: */ |
| /* case USB_CDC_GET_MAX_DATAGRAM_SIZE: */ |
| /* case USB_CDC_SET_MAX_DATAGRAM_SIZE: */ |
| |
| default: |
| invalid: |
| DBG(cdev, "invalid control req%02x.%02x v%04x i%04x l%d\n", |
| ctrl->bRequestType, ctrl->bRequest, |
| w_value, w_index, w_length); |
| } |
| |
| /* respond with data transfer or status phase? */ |
| if (value >= 0) { |
| DBG(cdev, "ncm req%02x.%02x v%04x i%04x l%d\n", |
| ctrl->bRequestType, ctrl->bRequest, |
| w_value, w_index, w_length); |
| req->zero = 0; |
| req->length = value; |
| value = usb_ep_queue(cdev->gadget->ep0, req, GFP_ATOMIC); |
| if (value < 0) |
| ERROR(cdev, "ncm req %02x.%02x response err %d\n", |
| ctrl->bRequestType, ctrl->bRequest, |
| value); |
| } |
| |
| /* device either stalls (value < 0) or reports success */ |
| return value; |
| } |
| |
| |
| static int ncm_set_alt(struct usb_function *f, unsigned intf, unsigned alt) |
| { |
| struct f_ncm *ncm = func_to_ncm(f); |
| struct usb_composite_dev *cdev = f->config->cdev; |
| |
| /* Control interface has only altsetting 0 */ |
| if (intf == ncm->ctrl_id) { |
| if (alt != 0) |
| goto fail; |
| |
| if (ncm->notify->driver_data) { |
| DBG(cdev, "reset ncm control %d\n", intf); |
| usb_ep_disable(ncm->notify); |
| } |
| |
| if (!(ncm->notify->desc)) { |
| DBG(cdev, "init ncm ctrl %d\n", intf); |
| if (config_ep_by_speed(cdev->gadget, f, ncm->notify)) |
| goto fail; |
| } |
| usb_ep_enable(ncm->notify); |
| ncm->notify->driver_data = ncm; |
| |
| /* Data interface has two altsettings, 0 and 1 */ |
| } else if (intf == ncm->data_id) { |
| if (alt > 1) |
| goto fail; |
| |
| if (ncm->port.in_ep->driver_data) { |
| DBG(cdev, "reset ncm\n"); |
| ncm->timer_stopping = true; |
| ncm->netdev = NULL; |
| gether_disconnect(&ncm->port); |
| ncm_reset_values(ncm); |
| } |
| |
| /* |
| * CDC Network only sends data in non-default altsettings. |
| * Changing altsettings resets filters, statistics, etc. |
| */ |
| if (alt == 1) { |
| struct net_device *net; |
| |
| if (!ncm->port.in_ep->desc || |
| !ncm->port.out_ep->desc) { |
| DBG(cdev, "init ncm\n"); |
| if (config_ep_by_speed(cdev->gadget, f, |
| ncm->port.in_ep) || |
| config_ep_by_speed(cdev->gadget, f, |
| ncm->port.out_ep)) { |
| ncm->port.in_ep->desc = NULL; |
| ncm->port.out_ep->desc = NULL; |
| goto fail; |
| } |
| } |
| |
| /* TODO */ |
| /* Enable zlps by default for NCM conformance; |
| * override for musb_hdrc (avoids txdma ovhead) |
| */ |
| ncm->port.is_zlp_ok = !( |
| gadget_is_musbhdrc(cdev->gadget) |
| ); |
| ncm->port.cdc_filter = DEFAULT_FILTER; |
| DBG(cdev, "activate ncm\n"); |
| net = gether_connect(&ncm->port); |
| if (IS_ERR(net)) |
| return PTR_ERR(net); |
| ncm->netdev = net; |
| ncm->timer_stopping = false; |
| } |
| |
| spin_lock(&ncm->lock); |
| ncm_notify(ncm); |
| spin_unlock(&ncm->lock); |
| } else |
| goto fail; |
| |
| return 0; |
| fail: |
| return -EINVAL; |
| } |
| |
| /* |
| * Because the data interface supports multiple altsettings, |
| * this NCM function *MUST* implement a get_alt() method. |
| */ |
| static int ncm_get_alt(struct usb_function *f, unsigned intf) |
| { |
| struct f_ncm *ncm = func_to_ncm(f); |
| |
| if (intf == ncm->ctrl_id) |
| return 0; |
| return ncm->port.in_ep->driver_data ? 1 : 0; |
| } |
| |
| static struct sk_buff *package_for_tx(struct f_ncm *ncm) |
| { |
| __le16 *ntb_iter; |
| struct sk_buff *skb2 = NULL; |
| unsigned ndp_pad; |
| unsigned ndp_index; |
| unsigned new_len; |
| |
| const struct ndp_parser_opts *opts = ncm->parser_opts; |
| const int ndp_align = le16_to_cpu(ntb_parameters.wNdpInAlignment); |
| const int dgram_idx_len = 2 * 2 * opts->dgram_item_len; |
| |
| /* Stop the timer */ |
| hrtimer_try_to_cancel(&ncm->task_timer); |
| |
| ndp_pad = ALIGN(ncm->skb_tx_data->len, ndp_align) - |
| ncm->skb_tx_data->len; |
| ndp_index = ncm->skb_tx_data->len + ndp_pad; |
| new_len = ndp_index + dgram_idx_len + ncm->skb_tx_ndp->len; |
| |
| /* Set the final BlockLength and wNdpIndex */ |
| ntb_iter = (void *) ncm->skb_tx_data->data; |
| /* Increment pointer to BlockLength */ |
| ntb_iter += 2 + 1 + 1; |
| put_ncm(&ntb_iter, opts->block_length, new_len); |
| put_ncm(&ntb_iter, opts->ndp_index, ndp_index); |
| |
| /* Set the final NDP wLength */ |
| new_len = opts->ndp_size + |
| (ncm->ndp_dgram_count * dgram_idx_len); |
| ncm->ndp_dgram_count = 0; |
| /* Increment from start to wLength */ |
| ntb_iter = (void *) ncm->skb_tx_ndp->data; |
| ntb_iter += 2; |
| put_unaligned_le16(new_len, ntb_iter); |
| |
| /* Merge the skbs */ |
| swap(skb2, ncm->skb_tx_data); |
| if (ncm->skb_tx_data) { |
| dev_kfree_skb_any(ncm->skb_tx_data); |
| ncm->skb_tx_data = NULL; |
| } |
| |
| /* Insert NDP alignment. */ |
| ntb_iter = (void *) skb_put(skb2, ndp_pad); |
| memset(ntb_iter, 0, ndp_pad); |
| |
| /* Copy NTB across. */ |
| ntb_iter = (void *) skb_put(skb2, ncm->skb_tx_ndp->len); |
| memcpy(ntb_iter, ncm->skb_tx_ndp->data, ncm->skb_tx_ndp->len); |
| dev_kfree_skb_any(ncm->skb_tx_ndp); |
| ncm->skb_tx_ndp = NULL; |
| |
| /* Insert zero'd datagram. */ |
| ntb_iter = (void *) skb_put(skb2, dgram_idx_len); |
| memset(ntb_iter, 0, dgram_idx_len); |
| |
| return skb2; |
| } |
| |
| static struct sk_buff *ncm_wrap_ntb(struct gether *port, |
| struct sk_buff *skb) |
| { |
| struct f_ncm *ncm = func_to_ncm(&port->func); |
| struct sk_buff *skb2 = NULL; |
| int ncb_len = 0; |
| __le16 *ntb_data; |
| __le16 *ntb_ndp; |
| int dgram_pad; |
| |
| unsigned max_size = ncm->port.fixed_in_len; |
| const struct ndp_parser_opts *opts = ncm->parser_opts; |
| const int ndp_align = le16_to_cpu(ntb_parameters.wNdpInAlignment); |
| const int div = le16_to_cpu(ntb_parameters.wNdpInDivisor); |
| const int rem = le16_to_cpu(ntb_parameters.wNdpInPayloadRemainder); |
| const int dgram_idx_len = 2 * 2 * opts->dgram_item_len; |
| |
| if (!skb && !ncm->skb_tx_data) |
| return NULL; |
| |
| if (skb) { |
| /* Add the CRC if required up front */ |
| if (ncm->is_crc) { |
| uint32_t crc; |
| __le16 *crc_pos; |
| |
| crc = ~crc32_le(~0, |
| skb->data, |
| skb->len); |
| crc_pos = (void *) skb_put(skb, sizeof(uint32_t)); |
| put_unaligned_le32(crc, crc_pos); |
| } |
| |
| /* If the new skb is too big for the current NCM NTB then |
| * set the current stored skb to be sent now and clear it |
| * ready for new data. |
| * NOTE: Assume maximum align for speed of calculation. |
| */ |
| if (ncm->skb_tx_data |
| && (ncm->ndp_dgram_count >= TX_MAX_NUM_DPE |
| || (ncm->skb_tx_data->len + |
| div + rem + skb->len + |
| ncm->skb_tx_ndp->len + ndp_align + (2 * dgram_idx_len)) |
| > max_size)) { |
| skb2 = package_for_tx(ncm); |
| if (!skb2) |
| goto err; |
| } |
| |
| if (!ncm->skb_tx_data) { |
| ncb_len = opts->nth_size; |
| dgram_pad = ALIGN(ncb_len, div) + rem - ncb_len; |
| ncb_len += dgram_pad; |
| |
| /* Create a new skb for the NTH and datagrams. */ |
| ncm->skb_tx_data = alloc_skb(max_size, GFP_ATOMIC); |
| if (!ncm->skb_tx_data) |
| goto err; |
| |
| ntb_data = (void *) skb_put(ncm->skb_tx_data, ncb_len); |
| memset(ntb_data, 0, ncb_len); |
| /* dwSignature */ |
| put_unaligned_le32(opts->nth_sign, ntb_data); |
| ntb_data += 2; |
| /* wHeaderLength */ |
| put_unaligned_le16(opts->nth_size, ntb_data++); |
| |
| /* Allocate an skb for storing the NDP, |
| * TX_MAX_NUM_DPE should easily suffice for a |
| * 16k packet. |
| */ |
| ncm->skb_tx_ndp = alloc_skb((int)(opts->ndp_size |
| + opts->dpe_size |
| * TX_MAX_NUM_DPE), |
| GFP_ATOMIC); |
| if (!ncm->skb_tx_ndp) |
| goto err; |
| ntb_ndp = (void *) skb_put(ncm->skb_tx_ndp, |
| opts->ndp_size); |
| memset(ntb_ndp, 0, ncb_len); |
| /* dwSignature */ |
| put_unaligned_le32(ncm->ndp_sign, ntb_ndp); |
| ntb_ndp += 2; |
| |
| /* There is always a zeroed entry */ |
| ncm->ndp_dgram_count = 1; |
| |
| /* Note: we skip opts->next_ndp_index */ |
| } |
| |
| /* Delay the timer. */ |
| hrtimer_start(&ncm->task_timer, |
| ktime_set(0, TX_TIMEOUT_NSECS), |
| HRTIMER_MODE_REL); |
| |
| /* Add the datagram position entries */ |
| ntb_ndp = (void *) skb_put(ncm->skb_tx_ndp, dgram_idx_len); |
| memset(ntb_ndp, 0, dgram_idx_len); |
| |
| ncb_len = ncm->skb_tx_data->len; |
| dgram_pad = ALIGN(ncb_len, div) + rem - ncb_len; |
| ncb_len += dgram_pad; |
| |
| /* (d)wDatagramIndex */ |
| put_ncm(&ntb_ndp, opts->dgram_item_len, ncb_len); |
| /* (d)wDatagramLength */ |
| put_ncm(&ntb_ndp, opts->dgram_item_len, skb->len); |
| ncm->ndp_dgram_count++; |
| |
| /* Add the new data to the skb */ |
| ntb_data = (void *) skb_put(ncm->skb_tx_data, dgram_pad); |
| memset(ntb_data, 0, dgram_pad); |
| ntb_data = (void *) skb_put(ncm->skb_tx_data, skb->len); |
| memcpy(ntb_data, skb->data, skb->len); |
| dev_kfree_skb_any(skb); |
| skb = NULL; |
| |
| } else if (ncm->skb_tx_data && ncm->timer_force_tx) { |
| /* If the tx was requested because of a timeout then send */ |
| skb2 = package_for_tx(ncm); |
| if (!skb2) |
| goto err; |
| } |
| |
| return skb2; |
| |
| err: |
| ncm->netdev->stats.tx_dropped++; |
| |
| if (skb) |
| dev_kfree_skb_any(skb); |
| if (ncm->skb_tx_data) |
| dev_kfree_skb_any(ncm->skb_tx_data); |
| if (ncm->skb_tx_ndp) |
| dev_kfree_skb_any(ncm->skb_tx_ndp); |
| |
| return NULL; |
| } |
| |
| /* |
| * This transmits the NTB if there are frames waiting. |
| */ |
| static void ncm_tx_tasklet(unsigned long data) |
| { |
| struct f_ncm *ncm = (void *)data; |
| |
| if (ncm->timer_stopping) |
| return; |
| |
| /* Only send if data is available. */ |
| if (ncm->skb_tx_data) { |
| ncm->timer_force_tx = true; |
| |
| /* XXX This allowance of a NULL skb argument to ndo_start_xmit |
| * XXX is not sane. The gadget layer should be redesigned so |
| * XXX that the dev->wrap() invocations to build SKBs is transparent |
| * XXX and performed in some way outside of the ndo_start_xmit |
| * XXX interface. |
| */ |
| ncm->netdev->netdev_ops->ndo_start_xmit(NULL, ncm->netdev); |
| |
| ncm->timer_force_tx = false; |
| } |
| } |
| |
| /* |
| * The transmit should only be run if no skb data has been sent |
| * for a certain duration. |
| */ |
| static enum hrtimer_restart ncm_tx_timeout(struct hrtimer *data) |
| { |
| struct f_ncm *ncm = container_of(data, struct f_ncm, task_timer); |
| tasklet_schedule(&ncm->tx_tasklet); |
| return HRTIMER_NORESTART; |
| } |
| |
| static int ncm_unwrap_ntb(struct gether *port, |
| struct sk_buff *skb, |
| struct sk_buff_head *list) |
| { |
| struct f_ncm *ncm = func_to_ncm(&port->func); |
| __le16 *tmp = (void *) skb->data; |
| unsigned index, index2; |
| int ndp_index; |
| unsigned dg_len, dg_len2; |
| unsigned ndp_len; |
| struct sk_buff *skb2; |
| int ret = -EINVAL; |
| unsigned max_size = le32_to_cpu(ntb_parameters.dwNtbOutMaxSize); |
| const struct ndp_parser_opts *opts = ncm->parser_opts; |
| unsigned crc_len = ncm->is_crc ? sizeof(uint32_t) : 0; |
| int dgram_counter; |
| |
| /* dwSignature */ |
| if (get_unaligned_le32(tmp) != opts->nth_sign) { |
| INFO(port->func.config->cdev, "Wrong NTH SIGN, skblen %d\n", |
| skb->len); |
| print_hex_dump(KERN_INFO, "HEAD:", DUMP_PREFIX_ADDRESS, 32, 1, |
| skb->data, 32, false); |
| |
| goto err; |
| } |
| tmp += 2; |
| /* wHeaderLength */ |
| if (get_unaligned_le16(tmp++) != opts->nth_size) { |
| INFO(port->func.config->cdev, "Wrong NTB headersize\n"); |
| goto err; |
| } |
| tmp++; /* skip wSequence */ |
| |
| /* (d)wBlockLength */ |
| if (get_ncm(&tmp, opts->block_length) > max_size) { |
| INFO(port->func.config->cdev, "OUT size exceeded\n"); |
| goto err; |
| } |
| |
| ndp_index = get_ncm(&tmp, opts->ndp_index); |
| |
| /* Run through all the NDP's in the NTB */ |
| do { |
| /* NCM 3.2 */ |
| if (((ndp_index % 4) != 0) && |
| (ndp_index < opts->nth_size)) { |
| INFO(port->func.config->cdev, "Bad index: %#X\n", |
| ndp_index); |
| goto err; |
| } |
| |
| /* walk through NDP */ |
| tmp = (void *)(skb->data + ndp_index); |
| if (get_unaligned_le32(tmp) != ncm->ndp_sign) { |
| INFO(port->func.config->cdev, "Wrong NDP SIGN\n"); |
| goto err; |
| } |
| tmp += 2; |
| |
| ndp_len = get_unaligned_le16(tmp++); |
| /* |
| * NCM 3.3.1 |
| * entry is 2 items |
| * item size is 16/32 bits, opts->dgram_item_len * 2 bytes |
| * minimal: struct usb_cdc_ncm_ndpX + normal entry + zero entry |
| * Each entry is a dgram index and a dgram length. |
| */ |
| if ((ndp_len < opts->ndp_size |
| + 2 * 2 * (opts->dgram_item_len * 2)) |
| || (ndp_len % opts->ndplen_align != 0)) { |
| INFO(port->func.config->cdev, "Bad NDP length: %#X\n", |
| ndp_len); |
| goto err; |
| } |
| tmp += opts->reserved1; |
| /* Check for another NDP (d)wNextNdpIndex */ |
| ndp_index = get_ncm(&tmp, opts->next_ndp_index); |
| tmp += opts->reserved2; |
| |
| ndp_len -= opts->ndp_size; |
| index2 = get_ncm(&tmp, opts->dgram_item_len); |
| dg_len2 = get_ncm(&tmp, opts->dgram_item_len); |
| dgram_counter = 0; |
| |
| do { |
| index = index2; |
| dg_len = dg_len2; |
| if (dg_len < 14 + crc_len) { /* ethernet hdr + crc */ |
| INFO(port->func.config->cdev, |
| "Bad dgram length: %#X\n", dg_len); |
| goto err; |
| } |
| if (ncm->is_crc) { |
| uint32_t crc, crc2; |
| |
| crc = get_unaligned_le32(skb->data + |
| index + dg_len - |
| crc_len); |
| crc2 = ~crc32_le(~0, |
| skb->data + index, |
| dg_len - crc_len); |
| if (crc != crc2) { |
| INFO(port->func.config->cdev, |
| "Bad CRC\n"); |
| goto err; |
| } |
| } |
| |
| index2 = get_ncm(&tmp, opts->dgram_item_len); |
| dg_len2 = get_ncm(&tmp, opts->dgram_item_len); |
| |
| /* |
| * Copy the data into a new skb. |
| * This ensures the truesize is correct |
| */ |
| skb2 = netdev_alloc_skb_ip_align(ncm->netdev, |
| dg_len - crc_len); |
| if (skb2 == NULL) |
| goto err; |
| memcpy(skb_put(skb2, dg_len - crc_len), |
| skb->data + index, dg_len - crc_len); |
| |
| skb_queue_tail(list, skb2); |
| |
| ndp_len -= 2 * (opts->dgram_item_len * 2); |
| |
| dgram_counter++; |
| |
| if (index2 == 0 || dg_len2 == 0) |
| break; |
| } while (ndp_len > 2 * (opts->dgram_item_len * 2)); |
| } while (ndp_index); |
| |
| dev_kfree_skb_any(skb); |
| |
| VDBG(port->func.config->cdev, |
| "Parsed NTB with %d frames\n", dgram_counter); |
| return 0; |
| err: |
| skb_queue_purge(list); |
| dev_kfree_skb_any(skb); |
| return ret; |
| } |
| |
| static void ncm_disable(struct usb_function *f) |
| { |
| struct f_ncm *ncm = func_to_ncm(f); |
| struct usb_composite_dev *cdev = f->config->cdev; |
| |
| DBG(cdev, "ncm deactivated\n"); |
| |
| if (ncm->port.in_ep->driver_data) { |
| ncm->timer_stopping = true; |
| ncm->netdev = NULL; |
| gether_disconnect(&ncm->port); |
| } |
| |
| if (ncm->notify->driver_data) { |
| usb_ep_disable(ncm->notify); |
| ncm->notify->driver_data = NULL; |
| ncm->notify->desc = NULL; |
| } |
| } |
| |
| /*-------------------------------------------------------------------------*/ |
| |
| /* |
| * Callbacks let us notify the host about connect/disconnect when the |
| * net device is opened or closed. |
| * |
| * For testing, note that link states on this side include both opened |
| * and closed variants of: |
| * |
| * - disconnected/unconfigured |
| * - configured but inactive (data alt 0) |
| * - configured and active (data alt 1) |
| * |
| * Each needs to be tested with unplug, rmmod, SET_CONFIGURATION, and |
| * SET_INTERFACE (altsetting). Remember also that "configured" doesn't |
| * imply the host is actually polling the notification endpoint, and |
| * likewise that "active" doesn't imply it's actually using the data |
| * endpoints for traffic. |
| */ |
| |
| static void ncm_open(struct gether *geth) |
| { |
| struct f_ncm *ncm = func_to_ncm(&geth->func); |
| |
| DBG(ncm->port.func.config->cdev, "%s\n", __func__); |
| |
| spin_lock(&ncm->lock); |
| ncm->is_open = true; |
| ncm_notify(ncm); |
| spin_unlock(&ncm->lock); |
| } |
| |
| static void ncm_close(struct gether *geth) |
| { |
| struct f_ncm *ncm = func_to_ncm(&geth->func); |
| |
| DBG(ncm->port.func.config->cdev, "%s\n", __func__); |
| |
| spin_lock(&ncm->lock); |
| ncm->is_open = false; |
| ncm_notify(ncm); |
| spin_unlock(&ncm->lock); |
| } |
| |
| /*-------------------------------------------------------------------------*/ |
| |
| /* ethernet function driver setup/binding */ |
| |
| static int ncm_bind(struct usb_configuration *c, struct usb_function *f) |
| { |
| struct usb_composite_dev *cdev = c->cdev; |
| struct f_ncm *ncm = func_to_ncm(f); |
| struct usb_string *us; |
| int status; |
| struct usb_ep *ep; |
| struct f_ncm_opts *ncm_opts; |
| |
| if (!can_support_ecm(cdev->gadget)) |
| return -EINVAL; |
| |
| ncm_opts = container_of(f->fi, struct f_ncm_opts, func_inst); |
| /* |
| * in drivers/usb/gadget/configfs.c:configfs_composite_bind() |
| * configurations are bound in sequence with list_for_each_entry, |
| * in each configuration its functions are bound in sequence |
| * with list_for_each_entry, so we assume no race condition |
| * with regard to ncm_opts->bound access |
| */ |
| if (!ncm_opts->bound) { |
| mutex_lock(&ncm_opts->lock); |
| gether_set_gadget(ncm_opts->net, cdev->gadget); |
| status = gether_register_netdev(ncm_opts->net); |
| mutex_unlock(&ncm_opts->lock); |
| if (status) |
| return status; |
| ncm_opts->bound = true; |
| } |
| us = usb_gstrings_attach(cdev, ncm_strings, |
| ARRAY_SIZE(ncm_string_defs)); |
| if (IS_ERR(us)) |
| return PTR_ERR(us); |
| ncm_control_intf.iInterface = us[STRING_CTRL_IDX].id; |
| ncm_data_nop_intf.iInterface = us[STRING_DATA_IDX].id; |
| ncm_data_intf.iInterface = us[STRING_DATA_IDX].id; |
| ecm_desc.iMACAddress = us[STRING_MAC_IDX].id; |
| ncm_iad_desc.iFunction = us[STRING_IAD_IDX].id; |
| |
| /* allocate instance-specific interface IDs */ |
| status = usb_interface_id(c, f); |
| if (status < 0) |
| goto fail; |
| ncm->ctrl_id = status; |
| ncm_iad_desc.bFirstInterface = status; |
| |
| ncm_control_intf.bInterfaceNumber = status; |
| ncm_union_desc.bMasterInterface0 = status; |
| |
| status = usb_interface_id(c, f); |
| if (status < 0) |
| goto fail; |
| ncm->data_id = status; |
| |
| ncm_data_nop_intf.bInterfaceNumber = status; |
| ncm_data_intf.bInterfaceNumber = status; |
| ncm_union_desc.bSlaveInterface0 = status; |
| |
| status = -ENODEV; |
| |
| /* allocate instance-specific endpoints */ |
| ep = usb_ep_autoconfig(cdev->gadget, &fs_ncm_in_desc); |
| if (!ep) |
| goto fail; |
| ncm->port.in_ep = ep; |
| ep->driver_data = cdev; /* claim */ |
| |
| ep = usb_ep_autoconfig(cdev->gadget, &fs_ncm_out_desc); |
| if (!ep) |
| goto fail; |
| ncm->port.out_ep = ep; |
| ep->driver_data = cdev; /* claim */ |
| |
| ep = usb_ep_autoconfig(cdev->gadget, &fs_ncm_notify_desc); |
| if (!ep) |
| goto fail; |
| ncm->notify = ep; |
| ep->driver_data = cdev; /* claim */ |
| |
| status = -ENOMEM; |
| |
| /* allocate notification request and buffer */ |
| ncm->notify_req = usb_ep_alloc_request(ep, GFP_KERNEL); |
| if (!ncm->notify_req) |
| goto fail; |
| ncm->notify_req->buf = kmalloc(NCM_STATUS_BYTECOUNT, GFP_KERNEL); |
| if (!ncm->notify_req->buf) |
| goto fail; |
| ncm->notify_req->context = ncm; |
| ncm->notify_req->complete = ncm_notify_complete; |
| |
| /* |
| * support all relevant hardware speeds... we expect that when |
| * hardware is dual speed, all bulk-capable endpoints work at |
| * both speeds |
| */ |
| hs_ncm_in_desc.bEndpointAddress = fs_ncm_in_desc.bEndpointAddress; |
| hs_ncm_out_desc.bEndpointAddress = fs_ncm_out_desc.bEndpointAddress; |
| hs_ncm_notify_desc.bEndpointAddress = |
| fs_ncm_notify_desc.bEndpointAddress; |
| |
| status = usb_assign_descriptors(f, ncm_fs_function, ncm_hs_function, |
| NULL); |
| /* |
| * NOTE: all that is done without knowing or caring about |
| * the network link ... which is unavailable to this code |
| * until we're activated via set_alt(). |
| */ |
| |
| ncm->port.open = ncm_open; |
| ncm->port.close = ncm_close; |
| |
| tasklet_init(&ncm->tx_tasklet, ncm_tx_tasklet, (unsigned long) ncm); |
| hrtimer_init(&ncm->task_timer, CLOCK_MONOTONIC, HRTIMER_MODE_REL); |
| ncm->task_timer.function = ncm_tx_timeout; |
| |
| DBG(cdev, "CDC Network: %s speed IN/%s OUT/%s NOTIFY/%s\n", |
| gadget_is_dualspeed(c->cdev->gadget) ? "dual" : "full", |
| ncm->port.in_ep->name, ncm->port.out_ep->name, |
| ncm->notify->name); |
| return 0; |
| |
| fail: |
| usb_free_all_descriptors(f); |
| if (ncm->notify_req) { |
| kfree(ncm->notify_req->buf); |
| usb_ep_free_request(ncm->notify, ncm->notify_req); |
| } |
| |
| /* we might as well release our claims on endpoints */ |
| if (ncm->notify) |
| ncm->notify->driver_data = NULL; |
| if (ncm->port.out_ep) |
| ncm->port.out_ep->driver_data = NULL; |
| if (ncm->port.in_ep) |
| ncm->port.in_ep->driver_data = NULL; |
| |
| ERROR(cdev, "%s: can't bind, err %d\n", f->name, status); |
| |
| return status; |
| } |
| |
| static inline struct f_ncm_opts *to_f_ncm_opts(struct config_item *item) |
| { |
| return container_of(to_config_group(item), struct f_ncm_opts, |
| func_inst.group); |
| } |
| |
| /* f_ncm_item_ops */ |
| USB_ETHERNET_CONFIGFS_ITEM(ncm); |
| |
| /* f_ncm_opts_dev_addr */ |
| USB_ETHERNET_CONFIGFS_ITEM_ATTR_DEV_ADDR(ncm); |
| |
| /* f_ncm_opts_host_addr */ |
| USB_ETHERNET_CONFIGFS_ITEM_ATTR_HOST_ADDR(ncm); |
| |
| /* f_ncm_opts_qmult */ |
| USB_ETHERNET_CONFIGFS_ITEM_ATTR_QMULT(ncm); |
| |
| /* f_ncm_opts_ifname */ |
| USB_ETHERNET_CONFIGFS_ITEM_ATTR_IFNAME(ncm); |
| |
| static struct configfs_attribute *ncm_attrs[] = { |
| &f_ncm_opts_dev_addr.attr, |
| &f_ncm_opts_host_addr.attr, |
| &f_ncm_opts_qmult.attr, |
| &f_ncm_opts_ifname.attr, |
| NULL, |
| }; |
| |
| static struct config_item_type ncm_func_type = { |
| .ct_item_ops = &ncm_item_ops, |
| .ct_attrs = ncm_attrs, |
| .ct_owner = THIS_MODULE, |
| }; |
| |
| static void ncm_free_inst(struct usb_function_instance *f) |
| { |
| struct f_ncm_opts *opts; |
| |
| opts = container_of(f, struct f_ncm_opts, func_inst); |
| if (opts->bound) |
| gether_cleanup(netdev_priv(opts->net)); |
| else |
| free_netdev(opts->net); |
| kfree(opts); |
| } |
| |
| static struct usb_function_instance *ncm_alloc_inst(void) |
| { |
| struct f_ncm_opts *opts; |
| |
| opts = kzalloc(sizeof(*opts), GFP_KERNEL); |
| if (!opts) |
| return ERR_PTR(-ENOMEM); |
| mutex_init(&opts->lock); |
| opts->func_inst.free_func_inst = ncm_free_inst; |
| opts->net = gether_setup_default(); |
| if (IS_ERR(opts->net)) { |
| struct net_device *net = opts->net; |
| kfree(opts); |
| return ERR_CAST(net); |
| } |
| |
| config_group_init_type_name(&opts->func_inst.group, "", &ncm_func_type); |
| |
| return &opts->func_inst; |
| } |
| |
| static void ncm_free(struct usb_function *f) |
| { |
| struct f_ncm *ncm; |
| struct f_ncm_opts *opts; |
| |
| ncm = func_to_ncm(f); |
| opts = container_of(f->fi, struct f_ncm_opts, func_inst); |
| kfree(ncm); |
| mutex_lock(&opts->lock); |
| opts->refcnt--; |
| mutex_unlock(&opts->lock); |
| } |
| |
| static void ncm_unbind(struct usb_configuration *c, struct usb_function *f) |
| { |
| struct f_ncm *ncm = func_to_ncm(f); |
| |
| DBG(c->cdev, "ncm unbind\n"); |
| |
| hrtimer_cancel(&ncm->task_timer); |
| tasklet_kill(&ncm->tx_tasklet); |
| |
| ncm_string_defs[0].id = 0; |
| usb_free_all_descriptors(f); |
| |
| kfree(ncm->notify_req->buf); |
| usb_ep_free_request(ncm->notify, ncm->notify_req); |
| } |
| |
| static struct usb_function *ncm_alloc(struct usb_function_instance *fi) |
| { |
| struct f_ncm *ncm; |
| struct f_ncm_opts *opts; |
| int status; |
| |
| /* allocate and initialize one new instance */ |
| ncm = kzalloc(sizeof(*ncm), GFP_KERNEL); |
| if (!ncm) |
| return ERR_PTR(-ENOMEM); |
| |
| opts = container_of(fi, struct f_ncm_opts, func_inst); |
| mutex_lock(&opts->lock); |
| opts->refcnt++; |
| |
| /* export host's Ethernet address in CDC format */ |
| status = gether_get_host_addr_cdc(opts->net, ncm->ethaddr, |
| sizeof(ncm->ethaddr)); |
| if (status < 12) { /* strlen("01234567890a") */ |
| kfree(ncm); |
| mutex_unlock(&opts->lock); |
| return ERR_PTR(-EINVAL); |
| } |
| ncm_string_defs[STRING_MAC_IDX].s = ncm->ethaddr; |
| |
| spin_lock_init(&ncm->lock); |
| ncm_reset_values(ncm); |
| ncm->port.ioport = netdev_priv(opts->net); |
| mutex_unlock(&opts->lock); |
| ncm->port.is_fixed = true; |
| ncm->port.supports_multi_frame = true; |
| |
| ncm->port.func.name = "cdc_network"; |
| /* descriptors are per-instance copies */ |
| ncm->port.func.bind = ncm_bind; |
| ncm->port.func.unbind = ncm_unbind; |
| ncm->port.func.set_alt = ncm_set_alt; |
| ncm->port.func.get_alt = ncm_get_alt; |
| ncm->port.func.setup = ncm_setup; |
| ncm->port.func.disable = ncm_disable; |
| ncm->port.func.free_func = ncm_free; |
| |
| ncm->port.wrap = ncm_wrap_ntb; |
| ncm->port.unwrap = ncm_unwrap_ntb; |
| |
| return &ncm->port.func; |
| } |
| |
| DECLARE_USB_FUNCTION_INIT(ncm, ncm_alloc_inst, ncm_alloc); |
| MODULE_LICENSE("GPL"); |
| MODULE_AUTHOR("Yauheni Kaliuta"); |