fec: add FEC platform support to ColdFire CPU's setup code
m68knommu: add FEC platform support to ColdFire CPU's setup code
Move the per-CPU FEC driver setup code into the actual platform
setup code for each ColdFire CPU varient.
Signed-off-by: Greg Ungerer <gerg@uclinux.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
diff --git a/arch/m68knommu/platform/532x/config.c b/arch/m68knommu/platform/532x/config.c
index a347623..591f2f8 100644
--- a/arch/m68knommu/platform/532x/config.c
+++ b/arch/m68knommu/platform/532x/config.c
@@ -61,8 +61,38 @@
.dev.platform_data = m532x_uart_platform,
};
+static struct resource m532x_fec_resources[] = {
+ {
+ .start = 0xfc030000,
+ .end = 0xfc0307ff,
+ .flags = IORESOURCE_MEM,
+ },
+ {
+ .start = 64 + 36,
+ .end = 64 + 36,
+ .flags = IORESOURCE_IRQ,
+ },
+ {
+ .start = 64 + 40,
+ .end = 64 + 40,
+ .flags = IORESOURCE_IRQ,
+ },
+ {
+ .start = 64 + 42,
+ .end = 64 + 42,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device m532x_fec = {
+ .name = "fec",
+ .id = 0,
+ .num_resources = ARRAY_SIZE(m532x_fec_resources),
+ .resource = m532x_fec_resources,
+};
static struct platform_device *m532x_devices[] __initdata = {
&m532x_uart,
+ &m532x_fec,
};
/***************************************************************************/
@@ -93,6 +123,24 @@
for (line = 0; (line < nrlines); line++)
m532x_uart_init_line(line, m532x_uart_platform[line].irq);
}
+/***************************************************************************/
+
+static void __init m532x_fec_init(void)
+{
+ /* Unmask FEC interrupts at ColdFire interrupt controller */
+ MCF_INTC0_ICR36 = 0x2;
+ MCF_INTC0_ICR40 = 0x2;
+ MCF_INTC0_ICR42 = 0x2;
+
+ MCF_INTC0_IMRH &= ~(MCF_INTC_IMRH_INT_MASK36 |
+ MCF_INTC_IMRH_INT_MASK40 | MCF_INTC_IMRH_INT_MASK42);
+
+ /* Set multi-function pins to ethernet mode for fec0 */
+ MCF_GPIO_PAR_FECI2C |= (MCF_GPIO_PAR_FECI2C_PAR_MDC_EMDC |
+ MCF_GPIO_PAR_FECI2C_PAR_MDIO_EMDIO);
+ MCF_GPIO_PAR_FEC = (MCF_GPIO_PAR_FEC_PAR_FEC_7W_FEC |
+ MCF_GPIO_PAR_FEC_PAR_FEC_MII_FEC);
+}
/***************************************************************************/
@@ -150,6 +198,7 @@
static int __init init_BSP(void)
{
m532x_uarts_init();
+ m532x_fec_init();
platform_add_devices(m532x_devices, ARRAY_SIZE(m532x_devices));
return 0;
}