drivers/input/misc/ati_remote2.c - kernel/msm-4.9 - Gitiles

 /*
  * ati_remote2 - ATI/Philips USB RF remote driver
  *
  * Copyright (C) 2005 Ville Syrjala <syrjala@sci.fi>
  * Copyright (C) 2007 Peter Stokes <linux@dadeos.freeserve.co.uk>
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2
  * as published by the Free Software Foundation.
  */

 #include <linux/usb/input.h>

 #define DRIVER_DESC    "ATI/Philips USB RF remote driver"
 #define DRIVER_VERSION "0.2"

 MODULE_DESCRIPTION(DRIVER_DESC);
 MODULE_VERSION(DRIVER_VERSION);
 MODULE_AUTHOR("Ville Syrjala <syrjala@sci.fi>");
 MODULE_LICENSE("GPL");

 /*
  * ATI Remote Wonder II Channel Configuration
  *
  * The remote control can by assigned one of sixteen "channels" in order to facilitate
  * the use of multiple remote controls within range of each other.
  * A remote's "channel" may be altered by pressing and holding the "PC" button for
  * approximately 3 seconds, after which the button will slowly flash the count of the
  * currently configured "channel", using the numeric keypad enter a number between 1 and
  * 16 and then the "PC" button again, the button will slowly flash the count of the
  * newly configured "channel".
  */

 static unsigned int channel_mask = 0xFFFF;
 module_param(channel_mask, uint, 0644);
 MODULE_PARM_DESC(channel_mask, "Bitmask of channels to accept <15:Channel16>...<1:Channel2><0:Channel1>");

 static unsigned int mode_mask = 0x1F;
 module_param(mode_mask, uint, 0644);
 MODULE_PARM_DESC(mode_mask, "Bitmask of modes to accept <4:PC><3:AUX4><2:AUX3><1:AUX2><0:AUX1>");

 static struct usb_device_id ati_remote2_id_table[] = {
 	{ USB_DEVICE(0x0471, 0x0602) },	/* ATI Remote Wonder II */
 	{ }
 };
 MODULE_DEVICE_TABLE(usb, ati_remote2_id_table);

 static struct {
 	int hw_code;
 	int key_code;
 } ati_remote2_key_table[] = {
 	{ 0x00, KEY_0 },
 	{ 0x01, KEY_1 },
 	{ 0x02, KEY_2 },
 	{ 0x03, KEY_3 },
 	{ 0x04, KEY_4 },
 	{ 0x05, KEY_5 },
 	{ 0x06, KEY_6 },
 	{ 0x07, KEY_7 },
 	{ 0x08, KEY_8 },
 	{ 0x09, KEY_9 },
 	{ 0x0c, KEY_POWER },
 	{ 0x0d, KEY_MUTE },
 	{ 0x10, KEY_VOLUMEUP },
 	{ 0x11, KEY_VOLUMEDOWN },
 	{ 0x20, KEY_CHANNELUP },
 	{ 0x21, KEY_CHANNELDOWN },
 	{ 0x28, KEY_FORWARD },
 	{ 0x29, KEY_REWIND },
 	{ 0x2c, KEY_PLAY },
 	{ 0x30, KEY_PAUSE },
 	{ 0x31, KEY_STOP },
 	{ 0x37, KEY_RECORD },
 	{ 0x38, KEY_DVD },
 	{ 0x39, KEY_TV },
 	{ 0x54, KEY_MENU },
 	{ 0x58, KEY_UP },
 	{ 0x59, KEY_DOWN },
 	{ 0x5a, KEY_LEFT },
 	{ 0x5b, KEY_RIGHT },
 	{ 0x5c, KEY_OK },
 	{ 0x78, KEY_A },
 	{ 0x79, KEY_B },
 	{ 0x7a, KEY_C },
 	{ 0x7b, KEY_D },
 	{ 0x7c, KEY_E },
 	{ 0x7d, KEY_F },
 	{ 0x82, KEY_ENTER },
 	{ 0x8e, KEY_VENDOR },
 	{ 0x96, KEY_COFFEE },
 	{ 0xa9, BTN_LEFT },
 	{ 0xaa, BTN_RIGHT },
 	{ 0xbe, KEY_QUESTION },
 	{ 0xd5, KEY_FRONT },
 	{ 0xd0, KEY_EDIT },
 	{ 0xf9, KEY_INFO },
 	{ (0x00 << 8) | 0x3f, KEY_PROG1 },
 	{ (0x01 << 8) | 0x3f, KEY_PROG2 },
 	{ (0x02 << 8) | 0x3f, KEY_PROG3 },
 	{ (0x03 << 8) | 0x3f, KEY_PROG4 },
 	{ (0x04 << 8) | 0x3f, KEY_PC },
 	{ 0, KEY_RESERVED }
 };

 struct ati_remote2 {
 	struct input_dev *idev;
 	struct usb_device *udev;

 	struct usb_interface *intf[2];
 	struct usb_endpoint_descriptor *ep[2];
 	struct urb *urb[2];
 	void *buf[2];
 	dma_addr_t buf_dma[2];

 	unsigned long jiffies;
 	int mode;

 	char name[64];
 	char phys[64];
 };

 static int ati_remote2_probe(struct usb_interface *interface, const struct usb_device_id *id);
 static void ati_remote2_disconnect(struct usb_interface *interface);

 static struct usb_driver ati_remote2_driver = {
 	.name       = "ati_remote2",
 	.probe      = ati_remote2_probe,
 	.disconnect = ati_remote2_disconnect,
 	.id_table   = ati_remote2_id_table,
 };

 static int ati_remote2_open(struct input_dev *idev)
 {
 	struct ati_remote2 *ar2 = input_get_drvdata(idev);
 	int r;

 	r = usb_submit_urb(ar2->urb[0], GFP_KERNEL);
 	if (r) {
 		dev_err(&ar2->intf[0]->dev,
 			"%s: usb_submit_urb() = %d\n", __FUNCTION__, r);
 		return r;
 	}
 	r = usb_submit_urb(ar2->urb[1], GFP_KERNEL);
 	if (r) {
 		usb_kill_urb(ar2->urb[0]);
 		dev_err(&ar2->intf[1]->dev,
 			"%s: usb_submit_urb() = %d\n", __FUNCTION__, r);
 		return r;
 	}

 	return 0;
 }

 static void ati_remote2_close(struct input_dev *idev)
 {
 	struct ati_remote2 *ar2 = input_get_drvdata(idev);

 	usb_kill_urb(ar2->urb[0]);
 	usb_kill_urb(ar2->urb[1]);
 }

 static void ati_remote2_input_mouse(struct ati_remote2 *ar2)
 {
 	struct input_dev *idev = ar2->idev;
 	u8 *data = ar2->buf[0];
 	int channel, mode;

 	channel = data[0] >> 4;

 	if (!((1 << channel) & channel_mask))
 		return;

 	mode = data[0] & 0x0F;

 	if (mode > 4) {
 		dev_err(&ar2->intf[0]->dev,
 			"Unknown mode byte (%02x %02x %02x %02x)\n",
 			data[3], data[2], data[1], data[0]);
 		return;
 	}

 	if (!((1 << mode) & mode_mask))
 		return;

 	input_event(idev, EV_REL, REL_X, (s8) data[1]);
 	input_event(idev, EV_REL, REL_Y, (s8) data[2]);
 	input_sync(idev);
 }

 static int ati_remote2_lookup(unsigned int hw_code)
 {
 	int i;

 	for (i = 0; ati_remote2_key_table[i].key_code != KEY_RESERVED; i++)
 		if (ati_remote2_key_table[i].hw_code == hw_code)
 			return i;

 	return -1;
 }

 static void ati_remote2_input_key(struct ati_remote2 *ar2)
 {
 	struct input_dev *idev = ar2->idev;
 	u8 *data = ar2->buf[1];
 	int channel, mode, hw_code, index;

 	channel = data[0] >> 4;

 	if (!((1 << channel) & channel_mask))
 		return;

 	mode = data[0] & 0x0F;

 	if (mode > 4) {
 		dev_err(&ar2->intf[1]->dev,
 			"Unknown mode byte (%02x %02x %02x %02x)\n",
 			data[3], data[2], data[1], data[0]);
 		return;
 	}

 	hw_code = data[2];
 	/*
 	 * Mode keys (AUX1-AUX4, PC) all generate the same code byte.
 	 * Use the mode byte to figure out which one was pressed.
 	 */
 	if (hw_code == 0x3f) {
 		/*
 		 * For some incomprehensible reason the mouse pad generates
 		 * events which look identical to the events from the last
 		 * pressed mode key. Naturally we don't want to generate key
 		 * events for the mouse pad so we filter out any subsequent
 		 * events from the same mode key.
 		 */
 		if (ar2->mode == mode)
 			return;

 		if (data[1] == 0)
 			ar2->mode = mode;

 		hw_code |= mode << 8;
 	}

 	if (!((1 << mode) & mode_mask))
 		return;

 	index = ati_remote2_lookup(hw_code);
 	if (index < 0) {
 		dev_err(&ar2->intf[1]->dev,
 			"Unknown code byte (%02x %02x %02x %02x)\n",
 			data[3], data[2], data[1], data[0]);
 		return;
 	}

 	switch (data[1]) {
 	case 0:	/* release */
 		break;
 	case 1:	/* press */
 		ar2->jiffies = jiffies + msecs_to_jiffies(idev->rep[REP_DELAY]);
 		break;
 	case 2:	/* repeat */

 		/* No repeat for mouse buttons. */
 		if (ati_remote2_key_table[index].key_code == BTN_LEFT ||
 		    ati_remote2_key_table[index].key_code == BTN_RIGHT)
 			return;

 		if (!time_after_eq(jiffies, ar2->jiffies))
 			return;

 		ar2->jiffies = jiffies + msecs_to_jiffies(idev->rep[REP_PERIOD]);
 		break;
 	default:
 		dev_err(&ar2->intf[1]->dev,
 			"Unknown state byte (%02x %02x %02x %02x)\n",
 			data[3], data[2], data[1], data[0]);
 		return;
 	}

 	input_event(idev, EV_KEY, ati_remote2_key_table[index].key_code, data[1]);
 	input_sync(idev);
 }

 static void ati_remote2_complete_mouse(struct urb *urb)
 {
 	struct ati_remote2 *ar2 = urb->context;
 	int r;

 	switch (urb->status) {
 	case 0:
 		ati_remote2_input_mouse(ar2);
 		break;
 	case -ENOENT:
 	case -EILSEQ:
 	case -ECONNRESET:
 	case -ESHUTDOWN:
 		dev_dbg(&ar2->intf[0]->dev,
 			"%s(): urb status = %d\n", __FUNCTION__, urb->status);
 		return;
 	default:
 		dev_err(&ar2->intf[0]->dev,
 			"%s(): urb status = %d\n", __FUNCTION__, urb->status);
 	}

 	r = usb_submit_urb(urb, GFP_ATOMIC);
 	if (r)
 		dev_err(&ar2->intf[0]->dev,
 			"%s(): usb_submit_urb() = %d\n", __FUNCTION__, r);
 }

 static void ati_remote2_complete_key(struct urb *urb)
 {
 	struct ati_remote2 *ar2 = urb->context;
 	int r;

 	switch (urb->status) {
 	case 0:
 		ati_remote2_input_key(ar2);
 		break;
 	case -ENOENT:
 	case -EILSEQ:
 	case -ECONNRESET:
 	case -ESHUTDOWN:
 		dev_dbg(&ar2->intf[1]->dev,
 			"%s(): urb status = %d\n", __FUNCTION__, urb->status);
 		return;
 	default:
 		dev_err(&ar2->intf[1]->dev,
 			"%s(): urb status = %d\n", __FUNCTION__, urb->status);
 	}

 	r = usb_submit_urb(urb, GFP_ATOMIC);
 	if (r)
 		dev_err(&ar2->intf[1]->dev,
 			"%s(): usb_submit_urb() = %d\n", __FUNCTION__, r);
 }

 static int ati_remote2_input_init(struct ati_remote2 *ar2)
 {
 	struct input_dev *idev;
 	int i, retval;

 	idev = input_allocate_device();
 	if (!idev)
 		return -ENOMEM;

 	ar2->idev = idev;
 	input_set_drvdata(idev, ar2);

 	idev->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_REP) | BIT_MASK(EV_REL);
 	idev->keybit[BIT_WORD(BTN_MOUSE)] = BIT_MASK(BTN_LEFT) |
 		BIT_MASK(BTN_RIGHT);
 	idev->relbit[0] = BIT_MASK(REL_X) | BIT_MASK(REL_Y);
 	for (i = 0; ati_remote2_key_table[i].key_code != KEY_RESERVED; i++)
 		set_bit(ati_remote2_key_table[i].key_code, idev->keybit);

 	idev->rep[REP_DELAY]  = 250;
 	idev->rep[REP_PERIOD] = 33;

 	idev->open = ati_remote2_open;
 	idev->close = ati_remote2_close;

 	idev->name = ar2->name;
 	idev->phys = ar2->phys;

 	usb_to_input_id(ar2->udev, &idev->id);
 	idev->dev.parent = &ar2->udev->dev;

 	retval = input_register_device(idev);
 	if (retval)
 		input_free_device(idev);

 	return retval;
 }

 static int ati_remote2_urb_init(struct ati_remote2 *ar2)
 {
 	struct usb_device *udev = ar2->udev;
 	int i, pipe, maxp;

 	for (i = 0; i < 2; i++) {
 		ar2->buf[i] = usb_buffer_alloc(udev, 4, GFP_KERNEL, &ar2->buf_dma[i]);
 		if (!ar2->buf[i])
 			return -ENOMEM;

 		ar2->urb[i] = usb_alloc_urb(0, GFP_KERNEL);
 		if (!ar2->urb[i])
 			return -ENOMEM;

 		pipe = usb_rcvintpipe(udev, ar2->ep[i]->bEndpointAddress);
 		maxp = usb_maxpacket(udev, pipe, usb_pipeout(pipe));
 		maxp = maxp > 4 ? 4 : maxp;

 		usb_fill_int_urb(ar2->urb[i], udev, pipe, ar2->buf[i], maxp,
 				 i ? ati_remote2_complete_key : ati_remote2_complete_mouse,
 				 ar2, ar2->ep[i]->bInterval);
 		ar2->urb[i]->transfer_dma = ar2->buf_dma[i];
 		ar2->urb[i]->transfer_flags |= URB_NO_TRANSFER_DMA_MAP;
 	}

 	return 0;
 }

 static void ati_remote2_urb_cleanup(struct ati_remote2 *ar2)
 {
 	int i;

 	for (i = 0; i < 2; i++) {
 		usb_free_urb(ar2->urb[i]);
 		usb_buffer_free(ar2->udev, 4, ar2->buf[i], ar2->buf_dma[i]);
 	}
 }

 static int ati_remote2_setup(struct ati_remote2 *ar2)
 {
 	int r, i, channel;

 	/*
 	 * Configure receiver to only accept input from remote "channel"
 	 *  channel == 0  -> Accept input from any remote channel
 	 *  channel == 1  -> Only accept input from remote channel 1
 	 *  channel == 2  -> Only accept input from remote channel 2
 	 *  ...
 	 *  channel == 16 -> Only accept input from remote channel 16
 	 */

 	channel = 0;
 	for (i = 0; i < 16; i++) {
 		if ((1 << i) & channel_mask) {
 			if (!(~(1 << i) & 0xFFFF & channel_mask))
 				channel = i + 1;
 			break;
 		}
 	}

 	r = usb_control_msg(ar2->udev, usb_sndctrlpipe(ar2->udev, 0),
 			    0x20,
 			    USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_INTERFACE,
 			    channel, 0x0, NULL, 0, USB_CTRL_SET_TIMEOUT);
 	if (r) {
 		dev_err(&ar2->udev->dev, "%s - failed to set channel due to error: %d\n",
 			__FUNCTION__, r);
 		return r;
 	}

 	return 0;
 }

 static int ati_remote2_probe(struct usb_interface *interface, const struct usb_device_id *id)
 {
 	struct usb_device *udev = interface_to_usbdev(interface);
 	struct usb_host_interface *alt = interface->cur_altsetting;
 	struct ati_remote2 *ar2;
 	int r;

 	if (alt->desc.bInterfaceNumber)
 		return -ENODEV;

 	ar2 = kzalloc(sizeof (struct ati_remote2), GFP_KERNEL);
 	if (!ar2)
 		return -ENOMEM;

 	ar2->udev = udev;

 	ar2->intf[0] = interface;
 	ar2->ep[0] = &alt->endpoint[0].desc;

 	ar2->intf[1] = usb_ifnum_to_if(udev, 1);
 	r = usb_driver_claim_interface(&ati_remote2_driver, ar2->intf[1], ar2);
 	if (r)
 		goto fail1;
 	alt = ar2->intf[1]->cur_altsetting;
 	ar2->ep[1] = &alt->endpoint[0].desc;

 	r = ati_remote2_urb_init(ar2);
 	if (r)
 		goto fail2;

 	r = ati_remote2_setup(ar2);
 	if (r)
 		goto fail2;

 	usb_make_path(udev, ar2->phys, sizeof(ar2->phys));
 	strlcat(ar2->phys, "/input0", sizeof(ar2->phys));

 	strlcat(ar2->name, "ATI Remote Wonder II", sizeof(ar2->name));

 	r = ati_remote2_input_init(ar2);
 	if (r)
 		goto fail2;

 	usb_set_intfdata(interface, ar2);

 	return 0;

  fail2:
 	ati_remote2_urb_cleanup(ar2);

 	usb_driver_release_interface(&ati_remote2_driver, ar2->intf[1]);
  fail1:
 	kfree(ar2);

 	return r;
 }

 static void ati_remote2_disconnect(struct usb_interface *interface)
 {
 	struct ati_remote2 *ar2;
 	struct usb_host_interface *alt = interface->cur_altsetting;

 	if (alt->desc.bInterfaceNumber)
 		return;

 	ar2 = usb_get_intfdata(interface);
 	usb_set_intfdata(interface, NULL);

 	input_unregister_device(ar2->idev);

 	ati_remote2_urb_cleanup(ar2);

 	usb_driver_release_interface(&ati_remote2_driver, ar2->intf[1]);

 	kfree(ar2);
 }

 static int __init ati_remote2_init(void)
 {
 	int r;

 	r = usb_register(&ati_remote2_driver);
 	if (r)
 		printk(KERN_ERR "ati_remote2: usb_register() = %d\n", r);
 	else
 		printk(KERN_INFO "ati_remote2: " DRIVER_DESC " " DRIVER_VERSION "\n");

 	return r;
 }

 static void __exit ati_remote2_exit(void)
 {
 	usb_deregister(&ati_remote2_driver);
 }

 module_init(ati_remote2_init);
 module_exit(ati_remote2_exit);
	/*
	* ati_remote2 - ATI/Philips USB RF remote driver
	*
	* Copyright (C) 2005 Ville Syrjala <syrjala@sci.fi>
	* Copyright (C) 2007 Peter Stokes <linux@dadeos.freeserve.co.uk>
	*
	* This program is free software; you can redistribute it and/or modify
	* it under the terms of the GNU General Public License version 2
	* as published by the Free Software Foundation.
	*/

	#include <linux/usb/input.h>

	#define DRIVER_DESC "ATI/Philips USB RF remote driver"
	#define DRIVER_VERSION "0.2"

	MODULE_DESCRIPTION(DRIVER_DESC);
	MODULE_VERSION(DRIVER_VERSION);
	MODULE_AUTHOR("Ville Syrjala <syrjala@sci.fi>");
	MODULE_LICENSE("GPL");

	/*
	* ATI Remote Wonder II Channel Configuration
	*
	* The remote control can by assigned one of sixteen "channels" in order to facilitate
	* the use of multiple remote controls within range of each other.
	* A remote's "channel" may be altered by pressing and holding the "PC" button for
	* approximately 3 seconds, after which the button will slowly flash the count of the
	* currently configured "channel", using the numeric keypad enter a number between 1 and
	* 16 and then the "PC" button again, the button will slowly flash the count of the
	* newly configured "channel".
	*/

	static unsigned int channel_mask = 0xFFFF;
	module_param(channel_mask, uint, 0644);
	MODULE_PARM_DESC(channel_mask, "Bitmask of channels to accept <15:Channel16>...<1:Channel2><0:Channel1>");

	static unsigned int mode_mask = 0x1F;
	module_param(mode_mask, uint, 0644);
	MODULE_PARM_DESC(mode_mask, "Bitmask of modes to accept <4:PC><3:AUX4><2:AUX3><1:AUX2><0:AUX1>");

	static struct usb_device_id ati_remote2_id_table[] = {
	{ USB_DEVICE(0x0471, 0x0602) }, /* ATI Remote Wonder II */
	{ }
	};
	MODULE_DEVICE_TABLE(usb, ati_remote2_id_table);

	static struct {
	int hw_code;
	int key_code;
	} ati_remote2_key_table[] = {
	{ 0x00, KEY_0 },
	{ 0x01, KEY_1 },
	{ 0x02, KEY_2 },
	{ 0x03, KEY_3 },
	{ 0x04, KEY_4 },
	{ 0x05, KEY_5 },
	{ 0x06, KEY_6 },
	{ 0x07, KEY_7 },
	{ 0x08, KEY_8 },
	{ 0x09, KEY_9 },
	{ 0x0c, KEY_POWER },
	{ 0x0d, KEY_MUTE },
	{ 0x10, KEY_VOLUMEUP },
	{ 0x11, KEY_VOLUMEDOWN },
	{ 0x20, KEY_CHANNELUP },
	{ 0x21, KEY_CHANNELDOWN },
	{ 0x28, KEY_FORWARD },
	{ 0x29, KEY_REWIND },
	{ 0x2c, KEY_PLAY },
	{ 0x30, KEY_PAUSE },
	{ 0x31, KEY_STOP },
	{ 0x37, KEY_RECORD },
	{ 0x38, KEY_DVD },
	{ 0x39, KEY_TV },
	{ 0x54, KEY_MENU },
	{ 0x58, KEY_UP },
	{ 0x59, KEY_DOWN },
	{ 0x5a, KEY_LEFT },
	{ 0x5b, KEY_RIGHT },
	{ 0x5c, KEY_OK },
	{ 0x78, KEY_A },
	{ 0x79, KEY_B },
	{ 0x7a, KEY_C },
	{ 0x7b, KEY_D },
	{ 0x7c, KEY_E },
	{ 0x7d, KEY_F },
	{ 0x82, KEY_ENTER },
	{ 0x8e, KEY_VENDOR },
	{ 0x96, KEY_COFFEE },
	{ 0xa9, BTN_LEFT },
	{ 0xaa, BTN_RIGHT },
	{ 0xbe, KEY_QUESTION },
	{ 0xd5, KEY_FRONT },
	{ 0xd0, KEY_EDIT },
	{ 0xf9, KEY_INFO },
	{ (0x00 << 8) \| 0x3f, KEY_PROG1 },
	{ (0x01 << 8) \| 0x3f, KEY_PROG2 },
	{ (0x02 << 8) \| 0x3f, KEY_PROG3 },
	{ (0x03 << 8) \| 0x3f, KEY_PROG4 },
	{ (0x04 << 8) \| 0x3f, KEY_PC },
	{ 0, KEY_RESERVED }
	};

	struct ati_remote2 {
	struct input_dev *idev;
	struct usb_device *udev;

	struct usb_interface *intf[2];
	struct usb_endpoint_descriptor *ep[2];
	struct urb *urb[2];
	void *buf[2];
	dma_addr_t buf_dma[2];

	unsigned long jiffies;
	int mode;

	char name[64];
	char phys[64];
	};

	static int ati_remote2_probe(struct usb_interface interface, const struct usb_device_id id);
	static void ati_remote2_disconnect(struct usb_interface *interface);

	static struct usb_driver ati_remote2_driver = {
	.name = "ati_remote2",
	.probe = ati_remote2_probe,
	.disconnect = ati_remote2_disconnect,
	.id_table = ati_remote2_id_table,
	};

	static int ati_remote2_open(struct input_dev *idev)
	{
	struct ati_remote2 *ar2 = input_get_drvdata(idev);
	int r;

	r = usb_submit_urb(ar2->urb[0], GFP_KERNEL);
	if (r) {
	dev_err(&ar2->intf[0]->dev,
	"%s: usb_submit_urb() = %d\n", __FUNCTION__, r);
	return r;
	}
	r = usb_submit_urb(ar2->urb[1], GFP_KERNEL);
	if (r) {
	usb_kill_urb(ar2->urb[0]);
	dev_err(&ar2->intf[1]->dev,
	"%s: usb_submit_urb() = %d\n", __FUNCTION__, r);
	return r;
	}

	return 0;
	}

	static void ati_remote2_close(struct input_dev *idev)
	{
	struct ati_remote2 *ar2 = input_get_drvdata(idev);

	usb_kill_urb(ar2->urb[0]);
	usb_kill_urb(ar2->urb[1]);
	}

	static void ati_remote2_input_mouse(struct ati_remote2 *ar2)
	{
	struct input_dev *idev = ar2->idev;
	u8 *data = ar2->buf[0];
	int channel, mode;

	channel = data[0] >> 4;

	if (!((1 << channel) & channel_mask))
	return;

	mode = data[0] & 0x0F;

	if (mode > 4) {
	dev_err(&ar2->intf[0]->dev,
	"Unknown mode byte (%02x %02x %02x %02x)\n",
	data[3], data[2], data[1], data[0]);
	return;
	}

	if (!((1 << mode) & mode_mask))
	return;

	input_event(idev, EV_REL, REL_X, (s8) data[1]);
	input_event(idev, EV_REL, REL_Y, (s8) data[2]);
	input_sync(idev);
	}

	static int ati_remote2_lookup(unsigned int hw_code)
	{
	int i;

	for (i = 0; ati_remote2_key_table[i].key_code != KEY_RESERVED; i++)
	if (ati_remote2_key_table[i].hw_code == hw_code)
	return i;

	return -1;
	}

	static void ati_remote2_input_key(struct ati_remote2 *ar2)
	{
	struct input_dev *idev = ar2->idev;
	u8 *data = ar2->buf[1];
	int channel, mode, hw_code, index;

	channel = data[0] >> 4;

	if (!((1 << channel) & channel_mask))
	return;

	mode = data[0] & 0x0F;

	if (mode > 4) {
	dev_err(&ar2->intf[1]->dev,
	"Unknown mode byte (%02x %02x %02x %02x)\n",
	data[3], data[2], data[1], data[0]);
	return;
	}

	hw_code = data[2];
	/*
	* Mode keys (AUX1-AUX4, PC) all generate the same code byte.
	* Use the mode byte to figure out which one was pressed.
	*/
	if (hw_code == 0x3f) {
	/*
	* For some incomprehensible reason the mouse pad generates
	* events which look identical to the events from the last
	* pressed mode key. Naturally we don't want to generate key
	* events for the mouse pad so we filter out any subsequent
	* events from the same mode key.
	*/
	if (ar2->mode == mode)
	return;

	if (data[1] == 0)
	ar2->mode = mode;

	hw_code \|= mode << 8;
	}

	if (!((1 << mode) & mode_mask))
	return;

	index = ati_remote2_lookup(hw_code);
	if (index < 0) {
	dev_err(&ar2->intf[1]->dev,
	"Unknown code byte (%02x %02x %02x %02x)\n",
	data[3], data[2], data[1], data[0]);
	return;
	}

	switch (data[1]) {
	case 0: /* release */
	break;
	case 1: /* press */
	ar2->jiffies = jiffies + msecs_to_jiffies(idev->rep[REP_DELAY]);
	break;
	case 2: /* repeat */

	/* No repeat for mouse buttons. */
	if (ati_remote2_key_table[index].key_code == BTN_LEFT \|\|
	ati_remote2_key_table[index].key_code == BTN_RIGHT)
	return;

	if (!time_after_eq(jiffies, ar2->jiffies))
	return;

	ar2->jiffies = jiffies + msecs_to_jiffies(idev->rep[REP_PERIOD]);
	break;
	default:
	dev_err(&ar2->intf[1]->dev,
	"Unknown state byte (%02x %02x %02x %02x)\n",
	data[3], data[2], data[1], data[0]);
	return;
	}

	input_event(idev, EV_KEY, ati_remote2_key_table[index].key_code, data[1]);
	input_sync(idev);
	}

	static void ati_remote2_complete_mouse(struct urb *urb)
	{
	struct ati_remote2 *ar2 = urb->context;
	int r;

	switch (urb->status) {
	case 0:
	ati_remote2_input_mouse(ar2);
	break;
	case -ENOENT:
	case -EILSEQ:
	case -ECONNRESET:
	case -ESHUTDOWN:
	dev_dbg(&ar2->intf[0]->dev,
	"%s(): urb status = %d\n", __FUNCTION__, urb->status);
	return;
	default:
	dev_err(&ar2->intf[0]->dev,
	"%s(): urb status = %d\n", __FUNCTION__, urb->status);
	}

	r = usb_submit_urb(urb, GFP_ATOMIC);
	if (r)
	dev_err(&ar2->intf[0]->dev,
	"%s(): usb_submit_urb() = %d\n", __FUNCTION__, r);
	}

	static void ati_remote2_complete_key(struct urb *urb)
	{
	struct ati_remote2 *ar2 = urb->context;
	int r;

	switch (urb->status) {
	case 0:
	ati_remote2_input_key(ar2);
	break;
	case -ENOENT:
	case -EILSEQ:
	case -ECONNRESET:
	case -ESHUTDOWN:
	dev_dbg(&ar2->intf[1]->dev,
	"%s(): urb status = %d\n", __FUNCTION__, urb->status);
	return;
	default:
	dev_err(&ar2->intf[1]->dev,
	"%s(): urb status = %d\n", __FUNCTION__, urb->status);
	}

	r = usb_submit_urb(urb, GFP_ATOMIC);
	if (r)
	dev_err(&ar2->intf[1]->dev,
	"%s(): usb_submit_urb() = %d\n", __FUNCTION__, r);
	}

	static int ati_remote2_input_init(struct ati_remote2 *ar2)
	{
	struct input_dev *idev;
	int i, retval;

	idev = input_allocate_device();
	if (!idev)
	return -ENOMEM;

	ar2->idev = idev;
	input_set_drvdata(idev, ar2);

	idev->evbit[0] = BIT_MASK(EV_KEY) \| BIT_MASK(EV_REP) \| BIT_MASK(EV_REL);
	idev->keybit[BIT_WORD(BTN_MOUSE)] = BIT_MASK(BTN_LEFT) \|
	BIT_MASK(BTN_RIGHT);
	idev->relbit[0] = BIT_MASK(REL_X) \| BIT_MASK(REL_Y);
	for (i = 0; ati_remote2_key_table[i].key_code != KEY_RESERVED; i++)
	set_bit(ati_remote2_key_table[i].key_code, idev->keybit);

	idev->rep[REP_DELAY] = 250;
	idev->rep[REP_PERIOD] = 33;

	idev->open = ati_remote2_open;
	idev->close = ati_remote2_close;

	idev->name = ar2->name;
	idev->phys = ar2->phys;

	usb_to_input_id(ar2->udev, &idev->id);
	idev->dev.parent = &ar2->udev->dev;

	retval = input_register_device(idev);
	if (retval)
	input_free_device(idev);

	return retval;
	}

	static int ati_remote2_urb_init(struct ati_remote2 *ar2)
	{
	struct usb_device *udev = ar2->udev;
	int i, pipe, maxp;

	for (i = 0; i < 2; i++) {
	ar2->buf[i] = usb_buffer_alloc(udev, 4, GFP_KERNEL, &ar2->buf_dma[i]);
	if (!ar2->buf[i])
	return -ENOMEM;

	ar2->urb[i] = usb_alloc_urb(0, GFP_KERNEL);
	if (!ar2->urb[i])
	return -ENOMEM;

	pipe = usb_rcvintpipe(udev, ar2->ep[i]->bEndpointAddress);
	maxp = usb_maxpacket(udev, pipe, usb_pipeout(pipe));
	maxp = maxp > 4 ? 4 : maxp;

	usb_fill_int_urb(ar2->urb[i], udev, pipe, ar2->buf[i], maxp,
	i ? ati_remote2_complete_key : ati_remote2_complete_mouse,
	ar2, ar2->ep[i]->bInterval);
	ar2->urb[i]->transfer_dma = ar2->buf_dma[i];
	ar2->urb[i]->transfer_flags \|= URB_NO_TRANSFER_DMA_MAP;
	}

	return 0;
	}

	static void ati_remote2_urb_cleanup(struct ati_remote2 *ar2)
	{
	int i;

	for (i = 0; i < 2; i++) {
	usb_free_urb(ar2->urb[i]);
	usb_buffer_free(ar2->udev, 4, ar2->buf[i], ar2->buf_dma[i]);
	}
	}

	static int ati_remote2_setup(struct ati_remote2 *ar2)
	{
	int r, i, channel;

	/*
	* Configure receiver to only accept input from remote "channel"
	* channel == 0 -> Accept input from any remote channel
	* channel == 1 -> Only accept input from remote channel 1
	* channel == 2 -> Only accept input from remote channel 2
	* ...
	* channel == 16 -> Only accept input from remote channel 16
	*/

	channel = 0;
	for (i = 0; i < 16; i++) {
	if ((1 << i) & channel_mask) {
	if (!(~(1 << i) & 0xFFFF & channel_mask))
	channel = i + 1;
	break;
	}
	}

	r = usb_control_msg(ar2->udev, usb_sndctrlpipe(ar2->udev, 0),
	0x20,
	USB_DIR_OUT \| USB_TYPE_VENDOR \| USB_RECIP_INTERFACE,
	channel, 0x0, NULL, 0, USB_CTRL_SET_TIMEOUT);
	if (r) {
	dev_err(&ar2->udev->dev, "%s - failed to set channel due to error: %d\n",
	__FUNCTION__, r);
	return r;
	}

	return 0;
	}

	static int ati_remote2_probe(struct usb_interface interface, const struct usb_device_id id)
	{
	struct usb_device *udev = interface_to_usbdev(interface);
	struct usb_host_interface *alt = interface->cur_altsetting;
	struct ati_remote2 *ar2;
	int r;

	if (alt->desc.bInterfaceNumber)
	return -ENODEV;

	ar2 = kzalloc(sizeof (struct ati_remote2), GFP_KERNEL);
	if (!ar2)
	return -ENOMEM;

	ar2->udev = udev;

	ar2->intf[0] = interface;
	ar2->ep[0] = &alt->endpoint[0].desc;

	ar2->intf[1] = usb_ifnum_to_if(udev, 1);
	r = usb_driver_claim_interface(&ati_remote2_driver, ar2->intf[1], ar2);
	if (r)
	goto fail1;
	alt = ar2->intf[1]->cur_altsetting;
	ar2->ep[1] = &alt->endpoint[0].desc;

	r = ati_remote2_urb_init(ar2);
	if (r)
	goto fail2;

	r = ati_remote2_setup(ar2);
	if (r)
	goto fail2;

	usb_make_path(udev, ar2->phys, sizeof(ar2->phys));
	strlcat(ar2->phys, "/input0", sizeof(ar2->phys));

	strlcat(ar2->name, "ATI Remote Wonder II", sizeof(ar2->name));

	r = ati_remote2_input_init(ar2);
	if (r)
	goto fail2;

	usb_set_intfdata(interface, ar2);

	return 0;

	fail2:
	ati_remote2_urb_cleanup(ar2);

	usb_driver_release_interface(&ati_remote2_driver, ar2->intf[1]);
	fail1:
	kfree(ar2);

	return r;
	}

	static void ati_remote2_disconnect(struct usb_interface *interface)
	{
	struct ati_remote2 *ar2;
	struct usb_host_interface *alt = interface->cur_altsetting;

	if (alt->desc.bInterfaceNumber)
	return;

	ar2 = usb_get_intfdata(interface);
	usb_set_intfdata(interface, NULL);

	input_unregister_device(ar2->idev);

	ati_remote2_urb_cleanup(ar2);

	usb_driver_release_interface(&ati_remote2_driver, ar2->intf[1]);

	kfree(ar2);
	}

	static int __init ati_remote2_init(void)
	{
	int r;

	r = usb_register(&ati_remote2_driver);
	if (r)
	printk(KERN_ERR "ati_remote2: usb_register() = %d\n", r);
	else
	printk(KERN_INFO "ati_remote2: " DRIVER_DESC " " DRIVER_VERSION "\n");

	return r;
	}

	static void __exit ati_remote2_exit(void)
	{
	usb_deregister(&ati_remote2_driver);
	}

	module_init(ati_remote2_init);
	module_exit(ati_remote2_exit);