diff --git a/drivers/regulator/Kconfig b/drivers/regulator/Kconfig
index 4e932cc..1c6320c 100644
--- a/drivers/regulator/Kconfig
+++ b/drivers/regulator/Kconfig
@@ -172,6 +172,14 @@
 	  This driver controls a Maxim 8660/8661 voltage output
 	  regulator via I2C bus.
 
+config REGULATOR_MAX8907
+	tristate "Maxim 8907 voltage regulator"
+	depends on MFD_MAX8907
+	help
+	  This driver controls a Maxim 8907 voltage output regulator
+	  via I2C bus. The provided regulator is suitable for Tegra
+	  chip to control Step-Down DC-DC and LDOs.
+
 config REGULATOR_MAX8925
 	tristate "Maxim MAX8925 Power Management IC"
 	depends on MFD_MAX8925
diff --git a/drivers/regulator/Makefile b/drivers/regulator/Makefile
index 3342615..3a0dbc5 100644
--- a/drivers/regulator/Makefile
+++ b/drivers/regulator/Makefile
@@ -30,6 +30,7 @@
 obj-$(CONFIG_REGULATOR_MAX1586) += max1586.o
 obj-$(CONFIG_REGULATOR_MAX8649)	+= max8649.o
 obj-$(CONFIG_REGULATOR_MAX8660) += max8660.o
+obj-$(CONFIG_REGULATOR_MAX8907) += max8907-regulator.o
 obj-$(CONFIG_REGULATOR_MAX8925) += max8925-regulator.o
 obj-$(CONFIG_REGULATOR_MAX8952) += max8952.o
 obj-$(CONFIG_REGULATOR_MAX8997) += max8997.o
diff --git a/drivers/regulator/max8907-regulator.c b/drivers/regulator/max8907-regulator.c
new file mode 100644
index 0000000..bd3b28b
--- /dev/null
+++ b/drivers/regulator/max8907-regulator.c
@@ -0,0 +1,383 @@
+/*
+ * max8907-regulator.c -- support regulators in max8907
+ *
+ * Copyright (C) 2010 Gyungoh Yoo <jack.yoo@maxim-ic.com>
+ * Copyright (C) 2010-2012, NVIDIA CORPORATION. All rights reserved.
+ *
+ * Portions based on drivers/regulator/tps65910-regulator.c,
+ *     Copyright 2010 Texas Instruments Inc.
+ *     Author: Graeme Gregory <gg@slimlogic.co.uk>
+ *     Author: Jorge Eduardo Candelaria <jedu@slimlogic.co.uk>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/err.h>
+#include <linux/init.h>
+#include <linux/mfd/core.h>
+#include <linux/mfd/max8907.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/regulator/driver.h>
+#include <linux/regulator/machine.h>
+#include <linux/regulator/of_regulator.h>
+#include <linux/regmap.h>
+#include <linux/slab.h>
+
+#define MAX8907_II2RR_VERSION_MASK	0xF0
+#define MAX8907_II2RR_VERSION_REV_A	0x00
+#define MAX8907_II2RR_VERSION_REV_B	0x10
+#define MAX8907_II2RR_VERSION_REV_C	0x30
+
+struct max8907_regulator {
+	struct regulator_desc desc[MAX8907_NUM_REGULATORS];
+	struct regulator_dev *rdev[MAX8907_NUM_REGULATORS];
+};
+
+#define REG_MBATT() \
+	[MAX8907_MBATT] = { \
+		.name = "MBATT", \
+		.supply_name = "mbatt", \
+		.id = MAX8907_MBATT, \
+		.ops = &max8907_mbatt_ops, \
+		.type = REGULATOR_VOLTAGE, \
+		.owner = THIS_MODULE, \
+	}
+
+#define REG_LDO(ids, supply, base, min, max, step) \
+	[MAX8907_##ids] = { \
+		.name = #ids, \
+		.supply_name = supply, \
+		.id = MAX8907_##ids, \
+		.n_voltages = ((max) - (min)) / (step) + 1, \
+		.ops = &max8907_ldo_ops, \
+		.type = REGULATOR_VOLTAGE, \
+		.owner = THIS_MODULE, \
+		.min_uV = (min), \
+		.uV_step = (step), \
+		.vsel_reg = (base) + MAX8907_VOUT, \
+		.vsel_mask = 0x3f, \
+		.enable_reg = (base) + MAX8907_CTL, \
+		.enable_mask = MAX8907_MASK_LDO_EN, \
+	}
+
+#define REG_FIXED(ids, supply, voltage) \
+	[MAX8907_##ids] = { \
+		.name = #ids, \
+		.supply_name = supply, \
+		.id = MAX8907_##ids, \
+		.n_voltages = 1, \
+		.ops = &max8907_fixed_ops, \
+		.type = REGULATOR_VOLTAGE, \
+		.owner = THIS_MODULE, \
+		.min_uV = (voltage), \
+	}
+
+#define REG_OUT5V(ids, supply, base, voltage) \
+	[MAX8907_##ids] = { \
+		.name = #ids, \
+		.supply_name = supply, \
+		.id = MAX8907_##ids, \
+		.n_voltages = 1, \
+		.ops = &max8907_out5v_ops, \
+		.type = REGULATOR_VOLTAGE, \
+		.owner = THIS_MODULE, \
+		.min_uV = (voltage), \
+		.enable_reg = (base), \
+		.enable_mask = MAX8907_MASK_OUT5V_EN, \
+	}
+
+#define REG_BBAT(ids, supply, base, min, max, step) \
+	[MAX8907_##ids] = { \
+		.name = #ids, \
+		.supply_name = supply, \
+		.id = MAX8907_##ids, \
+		.n_voltages = ((max) - (min)) / (step) + 1, \
+		.ops = &max8907_bbat_ops, \
+		.type = REGULATOR_VOLTAGE, \
+		.owner = THIS_MODULE, \
+		.min_uV = (min), \
+		.uV_step = (step), \
+		.vsel_reg = (base), \
+		.vsel_mask = MAX8907_MASK_VBBATTCV, \
+	}
+
+#define LDO_750_50(id, supply, base) REG_LDO(id, supply, (base), \
+			750000, 3900000, 50000)
+#define LDO_650_25(id, supply, base) REG_LDO(id, supply, (base), \
+			650000, 2225000, 25000)
+
+static struct regulator_ops max8907_mbatt_ops = {
+};
+
+static struct regulator_ops max8907_ldo_ops = {
+	.list_voltage = regulator_list_voltage_linear,
+	.set_voltage_sel = regulator_set_voltage_sel_regmap,
+	.get_voltage_sel = regulator_get_voltage_sel_regmap,
+	.enable = regulator_enable_regmap,
+	.disable = regulator_disable_regmap,
+	.is_enabled = regulator_is_enabled_regmap,
+};
+
+static struct regulator_ops max8907_ldo_hwctl_ops = {
+	.list_voltage = regulator_list_voltage_linear,
+	.set_voltage_sel = regulator_set_voltage_sel_regmap,
+	.get_voltage_sel = regulator_get_voltage_sel_regmap,
+};
+
+static struct regulator_ops max8907_fixed_ops = {
+	.list_voltage = regulator_list_voltage_linear,
+};
+
+static struct regulator_ops max8907_out5v_ops = {
+	.list_voltage = regulator_list_voltage_linear,
+	.enable = regulator_enable_regmap,
+	.disable = regulator_disable_regmap,
+	.is_enabled = regulator_is_enabled_regmap,
+};
+
+static struct regulator_ops max8907_out5v_hwctl_ops = {
+	.list_voltage = regulator_list_voltage_linear,
+};
+
+static struct regulator_ops max8907_bbat_ops = {
+	.list_voltage = regulator_list_voltage_linear,
+	.set_voltage_sel = regulator_set_voltage_sel_regmap,
+	.get_voltage_sel = regulator_get_voltage_sel_regmap,
+};
+
+static struct regulator_desc max8907_regulators[] = {
+	REG_MBATT(),
+	REG_LDO(SD1, "in-v1", MAX8907_REG_SDCTL1, 650000, 2225000, 25000),
+	REG_LDO(SD2, "in-v2", MAX8907_REG_SDCTL2, 637500, 1425000, 12500),
+	REG_LDO(SD3, "in-v3", MAX8907_REG_SDCTL3, 750000, 3900000, 50000),
+	LDO_750_50(LDO1, "in1", MAX8907_REG_LDOCTL1),
+	LDO_650_25(LDO2, "in2", MAX8907_REG_LDOCTL2),
+	LDO_650_25(LDO3, "in3", MAX8907_REG_LDOCTL3),
+	LDO_750_50(LDO4, "in4", MAX8907_REG_LDOCTL4),
+	LDO_750_50(LDO5, "in5", MAX8907_REG_LDOCTL5),
+	LDO_750_50(LDO6, "in6", MAX8907_REG_LDOCTL6),
+	LDO_750_50(LDO7, "in7", MAX8907_REG_LDOCTL7),
+	LDO_750_50(LDO8, "in8", MAX8907_REG_LDOCTL8),
+	LDO_750_50(LDO9, "in9", MAX8907_REG_LDOCTL9),
+	LDO_750_50(LDO10, "in10", MAX8907_REG_LDOCTL10),
+	LDO_750_50(LDO11, "in11", MAX8907_REG_LDOCTL11),
+	LDO_750_50(LDO12, "in12", MAX8907_REG_LDOCTL12),
+	LDO_750_50(LDO13, "in13", MAX8907_REG_LDOCTL13),
+	LDO_750_50(LDO14, "in14", MAX8907_REG_LDOCTL14),
+	LDO_750_50(LDO15, "in15", MAX8907_REG_LDOCTL15),
+	LDO_750_50(LDO16, "in16", MAX8907_REG_LDOCTL16),
+	LDO_650_25(LDO17, "in17", MAX8907_REG_LDOCTL17),
+	LDO_650_25(LDO18, "in18", MAX8907_REG_LDOCTL18),
+	LDO_750_50(LDO19, "in19", MAX8907_REG_LDOCTL19),
+	LDO_750_50(LDO20, "in20", MAX8907_REG_LDOCTL20),
+	REG_OUT5V(OUT5V, "mbatt", MAX8907_REG_OUT5VEN, 5000000),
+	REG_OUT5V(OUT33V, "mbatt",  MAX8907_REG_OUT33VEN, 3300000),
+	REG_BBAT(BBAT, "MBATT", MAX8907_REG_BBAT_CNFG,
+						2400000, 3000000, 200000),
+	REG_FIXED(SDBY, "MBATT", 1200000),
+	REG_FIXED(VRTC, "MBATT", 3300000),
+};
+
+#ifdef CONFIG_OF
+
+#define MATCH(_name, _id) \
+	[MAX8907_##_id] = { \
+		.name = #_name, \
+		.driver_data = (void *)&max8907_regulators[MAX8907_##_id], \
+	}
+
+static struct of_regulator_match max8907_matches[] = {
+	MATCH(mbatt, MBATT),
+	MATCH(sd1, SD1),
+	MATCH(sd2, SD2),
+	MATCH(sd3, SD3),
+	MATCH(ldo1, LDO1),
+	MATCH(ldo2, LDO2),
+	MATCH(ldo3, LDO3),
+	MATCH(ldo4, LDO4),
+	MATCH(ldo5, LDO5),
+	MATCH(ldo6, LDO6),
+	MATCH(ldo7, LDO7),
+	MATCH(ldo8, LDO8),
+	MATCH(ldo9, LDO9),
+	MATCH(ldo10, LDO10),
+	MATCH(ldo11, LDO11),
+	MATCH(ldo12, LDO12),
+	MATCH(ldo13, LDO13),
+	MATCH(ldo14, LDO14),
+	MATCH(ldo15, LDO15),
+	MATCH(ldo16, LDO16),
+	MATCH(ldo17, LDO17),
+	MATCH(ldo18, LDO18),
+	MATCH(ldo19, LDO19),
+	MATCH(ldo20, LDO20),
+	MATCH(out5v, OUT5V),
+	MATCH(out33v, OUT33V),
+	MATCH(bbat, BBAT),
+	MATCH(sdby, SDBY),
+	MATCH(vrtc, VRTC),
+};
+
+static int max8907_regulator_parse_dt(struct platform_device *pdev)
+{
+	struct device_node *np = pdev->dev.parent->of_node;
+	struct device_node *regulators;
+	int ret;
+
+	if (!pdev->dev.parent->of_node)
+		return 0;
+
+	regulators = of_find_node_by_name(np, "regulators");
+	if (!regulators) {
+		dev_err(&pdev->dev, "regulators node not found\n");
+		return -EINVAL;
+	}
+
+	ret = of_regulator_match(pdev->dev.parent, regulators,
+				 max8907_matches,
+				 ARRAY_SIZE(max8907_matches));
+	if (ret < 0) {
+		dev_err(&pdev->dev, "Error parsing regulator init data: %d\n",
+			ret);
+		return ret;
+	}
+
+	return 0;
+}
+#else
+static int max8907_regulator_parse_dt(struct platform_device *pdev)
+{
+	return 0;
+}
+#endif
+
+static __devinit int max8907_regulator_probe(struct platform_device *pdev)
+{
+	struct max8907 *max8907 = dev_get_drvdata(pdev->dev.parent);
+	struct max8907_platform_data *pdata = dev_get_platdata(max8907->dev);
+	int ret;
+	struct max8907_regulator *pmic;
+	unsigned int val;
+	int i;
+	struct regulator_config config = {};
+	struct regulator_init_data *idata;
+	const char *mbatt_rail_name = NULL;
+
+	ret = max8907_regulator_parse_dt(pdev);
+	if (ret)
+		return ret;
+
+	pmic = devm_kzalloc(&pdev->dev, sizeof(*pmic), GFP_KERNEL);
+	if (!pmic) {
+		dev_err(&pdev->dev, "Failed to alloc pmic\n");
+		return -ENOMEM;
+	}
+	platform_set_drvdata(pdev, pmic);
+
+	memcpy(pmic->desc, max8907_regulators, sizeof(pmic->desc));
+
+	/* Backwards compatibility with MAX8907B; SD1 uses different voltages */
+	regmap_read(max8907->regmap_gen, MAX8907_REG_II2RR, &val);
+	if ((val & MAX8907_II2RR_VERSION_MASK) ==
+	    MAX8907_II2RR_VERSION_REV_B) {
+		pmic->desc[MAX8907_SD1].min_uV = 637500;
+		pmic->desc[MAX8907_SD1].uV_step = 12500;
+		pmic->desc[MAX8907_SD1].n_voltages = (1425000 - 637500) / 12500;
+	}
+
+	for (i = 0; i < MAX8907_NUM_REGULATORS; i++) {
+		config.dev = pdev->dev.parent;
+		if (pdata)
+			idata = pdata->init_data[i];
+		else
+			idata = max8907_matches[i].init_data;
+		config.init_data = idata;
+		config.driver_data = pmic;
+		config.regmap = max8907->regmap_gen;
+		config.of_node = max8907_matches[i].of_node;
+
+		switch (pmic->desc[i].id) {
+		case MAX8907_MBATT:
+			mbatt_rail_name = idata->constraints.name;
+			break;
+		case MAX8907_BBAT:
+		case MAX8907_SDBY:
+		case MAX8907_VRTC:
+			idata->supply_regulator = mbatt_rail_name;
+			break;
+		}
+
+		if (pmic->desc[i].ops == &max8907_ldo_ops) {
+			regmap_read(config.regmap, pmic->desc[i].enable_reg,
+				    &val);
+			if ((val & MAX8907_MASK_LDO_SEQ) !=
+			    MAX8907_MASK_LDO_SEQ)
+				pmic->desc[i].ops = &max8907_ldo_hwctl_ops;
+		} else if (pmic->desc[i].ops == &max8907_out5v_ops) {
+			regmap_read(config.regmap, pmic->desc[i].enable_reg,
+				    &val);
+			if ((val & (MAX8907_MASK_OUT5V_VINEN |
+						MAX8907_MASK_OUT5V_ENSRC)) !=
+			    MAX8907_MASK_OUT5V_ENSRC)
+				pmic->desc[i].ops = &max8907_out5v_hwctl_ops;
+		}
+
+		pmic->rdev[i] = regulator_register(&pmic->desc[i], &config);
+		if (IS_ERR(pmic->rdev[i])) {
+			dev_err(&pdev->dev,
+				"failed to register %s regulator\n",
+				pmic->desc[i].name);
+			ret = PTR_ERR(pmic->rdev[i]);
+			goto err_unregister_regulator;
+		}
+	}
+
+	return 0;
+
+err_unregister_regulator:
+	while (--i >= 0)
+		regulator_unregister(pmic->rdev[i]);
+	return ret;
+}
+
+static __devexit int max8907_regulator_remove(struct platform_device *pdev)
+{
+	struct max8907_regulator *pmic;
+	int i;
+
+	for (i = 0; i < MAX8907_NUM_REGULATORS; i++)
+		regulator_unregister(pmic->rdev[i]);
+
+	return 0;
+}
+
+static struct platform_driver max8907_regulator_driver = {
+	.driver = {
+		   .name = "max8907-regulator",
+		   .owner = THIS_MODULE,
+		   },
+	.probe = max8907_regulator_probe,
+	.remove = __devexit_p(max8907_regulator_remove),
+};
+
+static int __init max8907_regulator_init(void)
+{
+	return platform_driver_register(&max8907_regulator_driver);
+}
+
+subsys_initcall(max8907_regulator_init);
+
+static void __exit max8907_reg_exit(void)
+{
+	platform_driver_unregister(&max8907_regulator_driver);
+}
+
+module_exit(max8907_reg_exit);
+
+MODULE_DESCRIPTION("MAX8907 regulator driver");
+MODULE_AUTHOR("Gyungoh Yoo <jack.yoo@maxim-ic.com>");
+MODULE_LICENSE("GPL v2");