blob: 7fc220aaff1433f25502dc297fc67f2707e40448 [file] [log] [blame]
menuconfig NVMEM
tristate "NVMEM Support"
help
Support for NVMEM(Non Volatile Memory) devices like EEPROM, EFUSES...
This framework is designed to provide a generic interface to NVMEM
from both the Linux Kernel and the userspace.
This driver can also be built as a module. If so, the module
will be called nvmem_core.
If unsure, say no.
if NVMEM
config NVMEM_SYSFS
bool "/sys/bus/nvmem/devices/*/nvmem (sysfs interface)"
depends on SYSFS
default y
help
Say Y here to add a sysfs interface for NVMEM.
This interface is mostly used by userspace applications to
read/write directly into nvmem.
config NVMEM_IMX_OCOTP
tristate "i.MX6 On-Chip OTP Controller support"
depends on SOC_IMX6 || COMPILE_TEST
depends on HAS_IOMEM
help
This is a driver for the On-Chip OTP Controller (OCOTP) available on
i.MX6 SoCs, providing access to 4 Kbits of one-time programmable
eFuses.
This driver can also be built as a module. If so, the module
will be called nvmem-imx-ocotp.
config NVMEM_LPC18XX_EEPROM
tristate "NXP LPC18XX EEPROM Memory Support"
depends on ARCH_LPC18XX || COMPILE_TEST
depends on HAS_IOMEM
help
Say Y here to include support for NXP LPC18xx EEPROM memory found in
NXP LPC185x/3x and LPC435x/3x/2x/1x devices.
To compile this driver as a module, choose M here: the module
will be called nvmem_lpc18xx_eeprom.
config NVMEM_MXS_OCOTP
tristate "Freescale MXS On-Chip OTP Memory Support"
depends on ARCH_MXS || COMPILE_TEST
depends on HAS_IOMEM
help
If you say Y here, you will get readonly access to the
One Time Programmable memory pages that are stored
on the Freescale i.MX23/i.MX28 processor.
This driver can also be built as a module. If so, the module
will be called nvmem-mxs-ocotp.
config MTK_EFUSE
tristate "Mediatek SoCs EFUSE support"
depends on ARCH_MEDIATEK || COMPILE_TEST
depends on HAS_IOMEM
help
This is a driver to access hardware related data like sensor
calibration, HDMI impedance etc.
This driver can also be built as a module. If so, the module
will be called efuse-mtk.
config QCOM_QFPROM
tristate "QCOM QFPROM Support"
depends on ARCH_QCOM || COMPILE_TEST
depends on HAS_IOMEM
help
Say y here to enable QFPROM support. The QFPROM provides access
functions for QFPROM data to rest of the drivers via nvmem interface.
This driver can also be built as a module. If so, the module
will be called nvmem_qfprom.
config ROCKCHIP_EFUSE
tristate "Rockchip eFuse Support"
depends on ARCH_ROCKCHIP || COMPILE_TEST
depends on HAS_IOMEM
help
This is a simple drive to dump specified values of Rockchip SoC
from eFuse, such as cpu-leakage.
This driver can also be built as a module. If so, the module
will be called nvmem_rockchip_efuse.
config NVMEM_SPMI_SDAM
tristate "SPMI SDAM Support"
depends on SPMI
help
This driver supports the Shared Direct Access Memory Module on
Qualcomm Technologies, Inc. PMICs. It provides the clients
an interface to read/write to the SDAM module's shared memory.
config NVMEM_SUNXI_SID
tristate "Allwinner SoCs SID support"
depends on ARCH_SUNXI
help
This is a driver for the 'security ID' available on various Allwinner
devices.
This driver can also be built as a module. If so, the module
will be called nvmem_sunxi_sid.
config NVMEM_VF610_OCOTP
tristate "VF610 SoC OCOTP support"
depends on SOC_VF610 || COMPILE_TEST
depends on HAS_IOMEM
help
This is a driver for the 'OCOTP' peripheral available on Vybrid
devices like VF5xx and VF6xx.
This driver can also be build as a module. If so, the module will
be called nvmem-vf610-ocotp.
config MESON_EFUSE
tristate "Amlogic eFuse Support"
depends on (ARCH_MESON || COMPILE_TEST) && MESON_SM
help
This is a driver to retrieve specific values from the eFuse found on
the Amlogic Meson SoCs.
This driver can also be built as a module. If so, the module
will be called nvmem_meson_efuse.
endif