blob: 07b2e96840643b6e8490125a1238d365e36e7833 [file] [log] [blame]
/*
* Copyright (c) 2016 Intel Corporation
*
* Permission to use, copy, modify, distribute, and sell this software and its
* documentation for any purpose is hereby granted without fee, provided that
* the above copyright notice appear in all copies and that both that copyright
* notice and this permission notice appear in supporting documentation, and
* that the name of the copyright holders not be used in advertising or
* publicity pertaining to distribution of the software without specific,
* written prior permission. The copyright holders make no representations
* about the suitability of this software for any purpose. It is provided "as
* is" without express or implied warranty.
*
* THE COPYRIGHT HOLDERS DISCLAIM ALL WARRANTIES WITH REGARD TO THIS SOFTWARE,
* INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS, IN NO
* EVENT SHALL THE COPYRIGHT HOLDERS BE LIABLE FOR ANY SPECIAL, INDIRECT OR
* CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE,
* DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER
* TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE
* OF THIS SOFTWARE.
*/
#ifndef __DRM_BRIDGE_H__
#define __DRM_BRIDGE_H__
#include <linux/list.h>
#include <linux/ctype.h>
#include <drm/drm_mode_object.h>
#include <drm/drm_modes.h>
struct drm_bridge;
/**
* struct drm_bridge_funcs - drm_bridge control functions
*/
struct drm_bridge_funcs {
/**
* @attach:
*
* This callback is invoked whenever our bridge is being attached to a
* &drm_encoder.
*
* The attach callback is optional.
*
* RETURNS:
*
* Zero on success, error code on failure.
*/
int (*attach)(struct drm_bridge *bridge);
/**
* @detach:
*
* This callback is invoked whenever our bridge is being detached from a
* &drm_encoder.
*
* The detach callback is optional.
*/
void (*detach)(struct drm_bridge *bridge);
/**
* @connector_init:
*
* This callback is used to init the connector from bridge side. In some
* cases connector and bridge are created in different modules, and the
* connector ops might need extra info from bridge. This callback offers
* the opportunity to overwrite connector's behavior in external bridge.
*
* The connector_init callback is optional.
*
* RETURNS:
*
* Zero on success, error code on failure.
*/
int (*connector_init)(struct drm_bridge *bridge,
struct drm_connector *connector);
/**
* @mode_fixup:
*
* This callback is used to validate and adjust a mode. The paramater
* mode is the display mode that should be fed to the next element in
* the display chain, either the final &drm_connector or the next
* &drm_bridge. The parameter adjusted_mode is the input mode the bridge
* requires. It can be modified by this callback and does not need to
* match mode.
*
* This is the only hook that allows a bridge to reject a modeset. If
* this function passes all other callbacks must succeed for this
* configuration.
*
* The mode_fixup callback is optional.
*
* NOTE:
*
* This function is called in the check phase of atomic modesets, which
* can be aborted for any reason (including on userspace's request to
* just check whether a configuration would be possible). Drivers MUST
* NOT touch any persistent state (hardware or software) or data
* structures except the passed in @state parameter.
*
* RETURNS:
*
* True if an acceptable configuration is possible, false if the modeset
* operation should be rejected.
*/
bool (*mode_fixup)(struct drm_bridge *bridge,
const struct drm_display_mode *mode,
struct drm_display_mode *adjusted_mode);
/**
* @disable:
*
* This callback should disable the bridge. It is called right before
* the preceding element in the display pipe is disabled. If the
* preceding element is a bridge this means it's called before that
* bridge's ->disable() function. If the preceding element is a
* &drm_encoder it's called right before the encoder's ->disable(),
* ->prepare() or ->dpms() hook from struct &drm_encoder_helper_funcs.
*
* The bridge can assume that the display pipe (i.e. clocks and timing
* signals) feeding it is still running when this callback is called.
*
* The disable callback is optional.
*/
void (*disable)(struct drm_bridge *bridge);
/**
* @post_disable:
*
* This callback should disable the bridge. It is called right after
* the preceding element in the display pipe is disabled. If the
* preceding element is a bridge this means it's called after that
* bridge's ->post_disable() function. If the preceding element is a
* &drm_encoder it's called right after the encoder's ->disable(),
* ->prepare() or ->dpms() hook from struct &drm_encoder_helper_funcs.
*
* The bridge must assume that the display pipe (i.e. clocks and timing
* singals) feeding it is no longer running when this callback is
* called.
*
* The post_disable callback is optional.
*/
void (*post_disable)(struct drm_bridge *bridge);
/**
* @mode_set:
*
* This callback should set the given mode on the bridge. It is called
* after the ->mode_set() callback for the preceding element in the
* display pipeline has been called already. The display pipe (i.e.
* clocks and timing signals) is off when this function is called.
*/
void (*mode_set)(struct drm_bridge *bridge,
struct drm_display_mode *mode,
struct drm_display_mode *adjusted_mode);
/**
* @pre_enable:
*
* This callback should enable the bridge. It is called right before
* the preceding element in the display pipe is enabled. If the
* preceding element is a bridge this means it's called before that
* bridge's ->pre_enable() function. If the preceding element is a
* &drm_encoder it's called right before the encoder's ->enable(),
* ->commit() or ->dpms() hook from struct &drm_encoder_helper_funcs.
*
* The display pipe (i.e. clocks and timing signals) feeding this bridge
* will not yet be running when this callback is called. The bridge must
* not enable the display link feeding the next bridge in the chain (if
* there is one) when this callback is called.
*
* The pre_enable callback is optional.
*/
void (*pre_enable)(struct drm_bridge *bridge);
/**
* @enable:
*
* This callback should enable the bridge. It is called right after
* the preceding element in the display pipe is enabled. If the
* preceding element is a bridge this means it's called after that
* bridge's ->enable() function. If the preceding element is a
* &drm_encoder it's called right after the encoder's ->enable(),
* ->commit() or ->dpms() hook from struct &drm_encoder_helper_funcs.
*
* The bridge can assume that the display pipe (i.e. clocks and timing
* signals) feeding it is running when this callback is called. This
* callback must enable the display link feeding the next bridge in the
* chain if there is one.
*
* The enable callback is optional.
*/
void (*enable)(struct drm_bridge *bridge);
};
/**
* struct drm_bridge - central DRM bridge control structure
* @dev: DRM device this bridge belongs to
* @encoder: encoder to which this bridge is connected
* @next: the next bridge in the encoder chain
* @of_node: device node pointer to the bridge
* @list: to keep track of all added bridges
* @funcs: control functions
* @driver_private: pointer to the bridge driver's internal context
*/
struct drm_bridge {
struct drm_device *dev;
struct drm_encoder *encoder;
struct drm_bridge *next;
#ifdef CONFIG_OF
struct device_node *of_node;
#endif
struct list_head list;
const struct drm_bridge_funcs *funcs;
void *driver_private;
};
int drm_bridge_add(struct drm_bridge *bridge);
void drm_bridge_remove(struct drm_bridge *bridge);
struct drm_bridge *of_drm_find_bridge(struct device_node *np);
int drm_bridge_attach(struct drm_device *dev, struct drm_bridge *bridge);
void drm_bridge_detach(struct drm_bridge *bridge);
bool drm_bridge_mode_fixup(struct drm_bridge *bridge,
const struct drm_display_mode *mode,
struct drm_display_mode *adjusted_mode);
void drm_bridge_disable(struct drm_bridge *bridge);
void drm_bridge_post_disable(struct drm_bridge *bridge);
void drm_bridge_mode_set(struct drm_bridge *bridge,
struct drm_display_mode *mode,
struct drm_display_mode *adjusted_mode);
void drm_bridge_pre_enable(struct drm_bridge *bridge);
void drm_bridge_enable(struct drm_bridge *bridge);
int drm_bridge_connector_init(struct drm_bridge *bridge,
struct drm_connector *connector);
#endif