blob: 9aae5679ffb225e8ff48b60ea8875802785c0436 [file] [log] [blame]
Peter Meerwald75cb2e12012-03-23 15:02:10 -07001/*
2 * Copyright 2011 bct electronic GmbH
3 *
4 * Author: Peter Meerwald <p.meerwald@bct-electronic.com>
5 *
6 * Based on leds-pca955x.c
7 *
8 * This file is subject to the terms and conditions of version 2 of
9 * the GNU General Public License. See the file COPYING in the main
10 * directory of this archive for more details.
11 *
12 * LED driver for the PCA9633 I2C LED driver (7-bit slave address 0x62)
13 *
14 */
15
16#include <linux/module.h>
17#include <linux/delay.h>
18#include <linux/string.h>
19#include <linux/ctype.h>
20#include <linux/leds.h>
21#include <linux/err.h>
22#include <linux/i2c.h>
23#include <linux/workqueue.h>
24#include <linux/slab.h>
Peter Meerwald2f73c3922012-09-24 14:53:49 +080025#include <linux/platform_data/leds-pca9633.h>
Peter Meerwald75cb2e12012-03-23 15:02:10 -070026
27/* LED select registers determine the source that drives LED outputs */
28#define PCA9633_LED_OFF 0x0 /* LED driver off */
29#define PCA9633_LED_ON 0x1 /* LED driver on */
30#define PCA9633_LED_PWM 0x2 /* Controlled through PWM */
31#define PCA9633_LED_GRP_PWM 0x3 /* Controlled through PWM/GRPPWM */
32
33#define PCA9633_MODE1 0x00
34#define PCA9633_MODE2 0x01
35#define PCA9633_PWM_BASE 0x02
36#define PCA9633_LEDOUT 0x08
37
38static const struct i2c_device_id pca9633_id[] = {
39 { "pca9633", 0 },
40 { }
41};
42MODULE_DEVICE_TABLE(i2c, pca9633_id);
43
44struct pca9633_led {
45 struct i2c_client *client;
46 struct work_struct work;
47 enum led_brightness brightness;
48 struct led_classdev led_cdev;
49 int led_num; /* 0 .. 3 potentially */
50 char name[32];
51};
52
53static void pca9633_led_work(struct work_struct *work)
54{
55 struct pca9633_led *pca9633 = container_of(work,
56 struct pca9633_led, work);
57 u8 ledout = i2c_smbus_read_byte_data(pca9633->client, PCA9633_LEDOUT);
58 int shift = 2 * pca9633->led_num;
59 u8 mask = 0x3 << shift;
60
61 switch (pca9633->brightness) {
62 case LED_FULL:
63 i2c_smbus_write_byte_data(pca9633->client, PCA9633_LEDOUT,
64 (ledout & ~mask) | (PCA9633_LED_ON << shift));
65 break;
66 case LED_OFF:
67 i2c_smbus_write_byte_data(pca9633->client, PCA9633_LEDOUT,
68 ledout & ~mask);
69 break;
70 default:
71 i2c_smbus_write_byte_data(pca9633->client,
72 PCA9633_PWM_BASE + pca9633->led_num,
73 pca9633->brightness);
74 i2c_smbus_write_byte_data(pca9633->client, PCA9633_LEDOUT,
75 (ledout & ~mask) | (PCA9633_LED_PWM << shift));
76 break;
77 }
78}
79
80static void pca9633_led_set(struct led_classdev *led_cdev,
81 enum led_brightness value)
82{
83 struct pca9633_led *pca9633;
84
85 pca9633 = container_of(led_cdev, struct pca9633_led, led_cdev);
86
87 pca9633->brightness = value;
88
89 /*
90 * Must use workqueue for the actual I/O since I2C operations
91 * can sleep.
92 */
93 schedule_work(&pca9633->work);
94}
95
Bill Pemberton98ea1ea2012-11-19 13:23:02 -050096static int pca9633_probe(struct i2c_client *client,
Peter Meerwald75cb2e12012-03-23 15:02:10 -070097 const struct i2c_device_id *id)
98{
99 struct pca9633_led *pca9633;
Peter Meerwald2f73c3922012-09-24 14:53:49 +0800100 struct pca9633_platform_data *pdata;
Peter Meerwald75cb2e12012-03-23 15:02:10 -0700101 int i, err;
102
Peter Meerwald75cb2e12012-03-23 15:02:10 -0700103 pdata = client->dev.platform_data;
104
105 if (pdata) {
Peter Meerwald2f73c3922012-09-24 14:53:49 +0800106 if (pdata->leds.num_leds <= 0 || pdata->leds.num_leds > 4) {
Peter Meerwald75cb2e12012-03-23 15:02:10 -0700107 dev_err(&client->dev, "board info must claim at most 4 LEDs");
108 return -EINVAL;
109 }
110 }
111
Bryan Wu983ce882012-07-04 11:40:10 +0800112 pca9633 = devm_kzalloc(&client->dev, 4 * sizeof(*pca9633), GFP_KERNEL);
Peter Meerwald75cb2e12012-03-23 15:02:10 -0700113 if (!pca9633)
114 return -ENOMEM;
115
116 i2c_set_clientdata(client, pca9633);
117
118 for (i = 0; i < 4; i++) {
119 pca9633[i].client = client;
120 pca9633[i].led_num = i;
121
122 /* Platform data can specify LED names and default triggers */
Peter Meerwald2f73c3922012-09-24 14:53:49 +0800123 if (pdata && i < pdata->leds.num_leds) {
124 if (pdata->leds.leds[i].name)
Peter Meerwald75cb2e12012-03-23 15:02:10 -0700125 snprintf(pca9633[i].name,
126 sizeof(pca9633[i].name), "pca9633:%s",
Peter Meerwald2f73c3922012-09-24 14:53:49 +0800127 pdata->leds.leds[i].name);
128 if (pdata->leds.leds[i].default_trigger)
Peter Meerwald75cb2e12012-03-23 15:02:10 -0700129 pca9633[i].led_cdev.default_trigger =
Peter Meerwald2f73c3922012-09-24 14:53:49 +0800130 pdata->leds.leds[i].default_trigger;
Peter Meerwald75cb2e12012-03-23 15:02:10 -0700131 } else {
132 snprintf(pca9633[i].name, sizeof(pca9633[i].name),
133 "pca9633:%d", i);
134 }
135
136 pca9633[i].led_cdev.name = pca9633[i].name;
137 pca9633[i].led_cdev.brightness_set = pca9633_led_set;
138
139 INIT_WORK(&pca9633[i].work, pca9633_led_work);
140
141 err = led_classdev_register(&client->dev, &pca9633[i].led_cdev);
142 if (err < 0)
143 goto exit;
144 }
145
146 /* Disable LED all-call address and set normal mode */
147 i2c_smbus_write_byte_data(client, PCA9633_MODE1, 0x00);
148
Peter Meerwald2f73c3922012-09-24 14:53:49 +0800149 /* Configure output: open-drain or totem pole (push-pull) */
150 if (pdata && pdata->outdrv == PCA9633_OPEN_DRAIN)
151 i2c_smbus_write_byte_data(client, PCA9633_MODE2, 0x01);
152
Peter Meerwald75cb2e12012-03-23 15:02:10 -0700153 /* Turn off LEDs */
154 i2c_smbus_write_byte_data(client, PCA9633_LEDOUT, 0x00);
155
156 return 0;
157
158exit:
159 while (i--) {
160 led_classdev_unregister(&pca9633[i].led_cdev);
161 cancel_work_sync(&pca9633[i].work);
162 }
163
Peter Meerwald75cb2e12012-03-23 15:02:10 -0700164 return err;
165}
166
Bill Pemberton678e8a62012-11-19 13:26:00 -0500167static int pca9633_remove(struct i2c_client *client)
Peter Meerwald75cb2e12012-03-23 15:02:10 -0700168{
169 struct pca9633_led *pca9633 = i2c_get_clientdata(client);
170 int i;
171
172 for (i = 0; i < 4; i++) {
173 led_classdev_unregister(&pca9633[i].led_cdev);
174 cancel_work_sync(&pca9633[i].work);
175 }
176
Peter Meerwald75cb2e12012-03-23 15:02:10 -0700177 return 0;
178}
179
180static struct i2c_driver pca9633_driver = {
181 .driver = {
182 .name = "leds-pca9633",
183 .owner = THIS_MODULE,
184 },
185 .probe = pca9633_probe,
Bill Pembertondf07cf82012-11-19 13:20:20 -0500186 .remove = pca9633_remove,
Peter Meerwald75cb2e12012-03-23 15:02:10 -0700187 .id_table = pca9633_id,
188};
189
190module_i2c_driver(pca9633_driver);
191
192MODULE_AUTHOR("Peter Meerwald <p.meerwald@bct-electronic.com>");
193MODULE_DESCRIPTION("PCA9633 LED driver");
194MODULE_LICENSE("GPL v2");