blob: 228903403cfcf78334184cf5aa3df2f99285a706 [file] [log] [blame]
Linus Torvalds1da177e2005-04-16 15:20:36 -07001/*
2 * Device driver for the i2c thermostat found on the iBook G4, Albook G4
3 *
4 * Copyright (C) 2003, 2004 Colin Leroy, Rasmus Rohde, Benjamin Herrenschmidt
5 *
6 * Documentation from
7 * http://www.analog.com/UploadedFiles/Data_Sheets/115254175ADT7467_pra.pdf
8 * http://www.analog.com/UploadedFiles/Data_Sheets/3686221171167ADT7460_b.pdf
9 *
10 */
11
Linus Torvalds1da177e2005-04-16 15:20:36 -070012#include <linux/types.h>
13#include <linux/module.h>
14#include <linux/errno.h>
15#include <linux/kernel.h>
16#include <linux/delay.h>
17#include <linux/sched.h>
18#include <linux/i2c.h>
19#include <linux/slab.h>
20#include <linux/init.h>
21#include <linux/spinlock.h>
22#include <linux/smp_lock.h>
23#include <linux/wait.h>
24#include <linux/suspend.h>
25#include <linux/kthread.h>
26#include <linux/moduleparam.h>
Nigel Cunningham7dfb7102006-12-06 20:34:23 -080027#include <linux/freezer.h>
Linus Torvalds1da177e2005-04-16 15:20:36 -070028
29#include <asm/prom.h>
30#include <asm/machdep.h>
31#include <asm/io.h>
32#include <asm/system.h>
33#include <asm/sections.h>
Benjamin Herrenschmidt7eebde72006-11-11 17:24:59 +110034#include <asm/of_platform.h>
Linus Torvalds1da177e2005-04-16 15:20:36 -070035
36#undef DEBUG
37
38#define CONFIG_REG 0x40
39#define MANUAL_MASK 0xe0
40#define AUTO_MASK 0x20
41
Colin Leroyd20c5072005-05-25 12:31:35 -070042static u8 TEMP_REG[3] = {0x26, 0x25, 0x27}; /* local, sensor1, sensor2 */
43static u8 LIMIT_REG[3] = {0x6b, 0x6a, 0x6c}; /* local, sensor1, sensor2 */
Linus Torvalds1da177e2005-04-16 15:20:36 -070044static u8 MANUAL_MODE[2] = {0x5c, 0x5d};
45static u8 REM_CONTROL[2] = {0x00, 0x40};
46static u8 FAN_SPEED[2] = {0x28, 0x2a};
47static u8 FAN_SPD_SET[2] = {0x30, 0x31};
48
Colin Leroyd20c5072005-05-25 12:31:35 -070049static u8 default_limits_local[3] = {70, 50, 70}; /* local, sensor1, sensor2 */
50static u8 default_limits_chip[3] = {80, 65, 80}; /* local, sensor1, sensor2 */
Olaf Hering87275852007-02-10 21:35:12 +010051static const char *sensor_location[3];
Linus Torvalds1da177e2005-04-16 15:20:36 -070052
Olaf Hering87275852007-02-10 21:35:12 +010053static int limit_adjust;
Linus Torvalds1da177e2005-04-16 15:20:36 -070054static int fan_speed = -1;
Olaf Hering87275852007-02-10 21:35:12 +010055static int verbose;
Linus Torvalds1da177e2005-04-16 15:20:36 -070056
57MODULE_AUTHOR("Colin Leroy <colin@colino.net>");
58MODULE_DESCRIPTION("Driver for ADT746x thermostat in iBook G4 and "
59 "Powerbook G4 Alu");
60MODULE_LICENSE("GPL");
61
62module_param(limit_adjust, int, 0644);
Colin Leroyd20c5072005-05-25 12:31:35 -070063MODULE_PARM_DESC(limit_adjust,"Adjust maximum temperatures (50 sensor1, 70 sensor2) "
Linus Torvalds1da177e2005-04-16 15:20:36 -070064 "by N degrees.");
65
66module_param(fan_speed, int, 0644);
67MODULE_PARM_DESC(fan_speed,"Specify starting fan speed (0-255) "
68 "(default 64)");
69
Ben Collins9f6d4b02006-01-06 00:11:40 -080070module_param(verbose, bool, 0);
71MODULE_PARM_DESC(verbose,"Verbose log operations "
72 "(default 0)");
73
Linus Torvalds1da177e2005-04-16 15:20:36 -070074struct thermostat {
75 struct i2c_client clt;
76 u8 temps[3];
77 u8 cached_temp[3];
78 u8 initial_limits[3];
79 u8 limits[3];
80 int last_speed[2];
81 int last_var[2];
82};
83
84static enum {ADT7460, ADT7467} therm_type;
85static int therm_bus, therm_address;
86static struct of_device * of_dev;
87static struct thermostat* thermostat;
88static struct task_struct *thread_therm = NULL;
89
90static int attach_one_thermostat(struct i2c_adapter *adapter, int addr,
91 int busno);
92
93static void write_both_fan_speed(struct thermostat *th, int speed);
94static void write_fan_speed(struct thermostat *th, int speed, int fan);
95
96static int
97write_reg(struct thermostat* th, int reg, u8 data)
98{
99 u8 tmp[2];
100 int rc;
101
102 tmp[0] = reg;
103 tmp[1] = data;
104 rc = i2c_master_send(&th->clt, (const char *)tmp, 2);
105 if (rc < 0)
106 return rc;
107 if (rc != 2)
108 return -ENODEV;
109 return 0;
110}
111
112static int
113read_reg(struct thermostat* th, int reg)
114{
115 u8 reg_addr, data;
116 int rc;
117
118 reg_addr = (u8)reg;
119 rc = i2c_master_send(&th->clt, &reg_addr, 1);
120 if (rc < 0)
121 return rc;
122 if (rc != 1)
123 return -ENODEV;
124 rc = i2c_master_recv(&th->clt, (char *)&data, 1);
125 if (rc < 0)
126 return rc;
127 return data;
128}
129
130static int
131attach_thermostat(struct i2c_adapter *adapter)
132{
133 unsigned long bus_no;
134
135 if (strncmp(adapter->name, "uni-n", 5))
136 return -ENODEV;
137 bus_no = simple_strtoul(adapter->name + 6, NULL, 10);
138 if (bus_no != therm_bus)
139 return -ENODEV;
140 return attach_one_thermostat(adapter, therm_address, bus_no);
141}
142
143static int
144detach_thermostat(struct i2c_adapter *adapter)
145{
146 struct thermostat* th;
147 int i;
148
149 if (thermostat == NULL)
150 return 0;
151
152 th = thermostat;
153
154 if (thread_therm != NULL) {
155 kthread_stop(thread_therm);
156 }
Ben Collins9f6d4b02006-01-06 00:11:40 -0800157
Linus Torvalds1da177e2005-04-16 15:20:36 -0700158 printk(KERN_INFO "adt746x: Putting max temperatures back from "
159 "%d, %d, %d to %d, %d, %d\n",
160 th->limits[0], th->limits[1], th->limits[2],
161 th->initial_limits[0], th->initial_limits[1],
162 th->initial_limits[2]);
Ben Collins9f6d4b02006-01-06 00:11:40 -0800163
Linus Torvalds1da177e2005-04-16 15:20:36 -0700164 for (i = 0; i < 3; i++)
165 write_reg(th, LIMIT_REG[i], th->initial_limits[i]);
166
167 write_both_fan_speed(th, -1);
168
169 i2c_detach_client(&th->clt);
170
171 thermostat = NULL;
172
173 kfree(th);
174
175 return 0;
176}
177
178static struct i2c_driver thermostat_driver = {
Laurent Riffarda33ca232005-11-26 20:40:34 +0100179 .driver = {
Laurent Riffarda33ca232005-11-26 20:40:34 +0100180 .name = "therm_adt746x",
181 },
Linus Torvalds1da177e2005-04-16 15:20:36 -0700182 .attach_adapter = attach_thermostat,
183 .detach_adapter = detach_thermostat,
184};
185
186static int read_fan_speed(struct thermostat *th, u8 addr)
187{
188 u8 tmp[2];
189 u16 res;
190
191 /* should start with low byte */
192 tmp[1] = read_reg(th, addr);
193 tmp[0] = read_reg(th, addr + 1);
194
195 res = tmp[1] + (tmp[0] << 8);
196 /* "a value of 0xffff means that the fan has stopped" */
197 return (res == 0xffff ? 0 : (90000*60)/res);
198}
199
200static void write_both_fan_speed(struct thermostat *th, int speed)
201{
202 write_fan_speed(th, speed, 0);
203 if (therm_type == ADT7460)
204 write_fan_speed(th, speed, 1);
205}
206
207static void write_fan_speed(struct thermostat *th, int speed, int fan)
208{
209 u8 manual;
210
211 if (speed > 0xff)
212 speed = 0xff;
213 else if (speed < -1)
214 speed = 0;
215
216 if (therm_type == ADT7467 && fan == 1)
217 return;
218
219 if (th->last_speed[fan] != speed) {
Ben Collins9f6d4b02006-01-06 00:11:40 -0800220 if (verbose) {
221 if (speed == -1)
222 printk(KERN_DEBUG "adt746x: Setting speed to automatic "
223 "for %s fan.\n", sensor_location[fan+1]);
224 else
225 printk(KERN_DEBUG "adt746x: Setting speed to %d "
226 "for %s fan.\n", speed, sensor_location[fan+1]);
227 }
Linus Torvalds1da177e2005-04-16 15:20:36 -0700228 } else
229 return;
230
231 if (speed >= 0) {
232 manual = read_reg(th, MANUAL_MODE[fan]);
233 write_reg(th, MANUAL_MODE[fan], manual|MANUAL_MASK);
234 write_reg(th, FAN_SPD_SET[fan], speed);
235 } else {
236 /* back to automatic */
237 if(therm_type == ADT7460) {
238 manual = read_reg(th,
239 MANUAL_MODE[fan]) & (~MANUAL_MASK);
240
241 write_reg(th,
242 MANUAL_MODE[fan], manual|REM_CONTROL[fan]);
243 } else {
244 manual = read_reg(th, MANUAL_MODE[fan]);
245 write_reg(th, MANUAL_MODE[fan], manual&(~AUTO_MASK));
246 }
247 }
248
249 th->last_speed[fan] = speed;
250}
251
252static void read_sensors(struct thermostat *th)
253{
254 int i = 0;
255
256 for (i = 0; i < 3; i++)
257 th->temps[i] = read_reg(th, TEMP_REG[i]);
258}
259
260#ifdef DEBUG
261static void display_stats(struct thermostat *th)
262{
263 if (th->temps[0] != th->cached_temp[0]
264 || th->temps[1] != th->cached_temp[1]
265 || th->temps[2] != th->cached_temp[2]) {
266 printk(KERN_INFO "adt746x: Temperature infos:"
267 " thermostats: %d,%d,%d;"
268 " limits: %d,%d,%d;"
269 " fan speed: %d RPM\n",
270 th->temps[0], th->temps[1], th->temps[2],
271 th->limits[0], th->limits[1], th->limits[2],
272 read_fan_speed(th, FAN_SPEED[0]));
273 }
274 th->cached_temp[0] = th->temps[0];
275 th->cached_temp[1] = th->temps[1];
276 th->cached_temp[2] = th->temps[2];
277}
278#endif
279
280static void update_fans_speed (struct thermostat *th)
281{
282 int lastvar = 0; /* last variation, for iBook */
283 int i = 0;
284
285 /* we don't care about local sensor, so we start at sensor 1 */
286 for (i = 1; i < 3; i++) {
287 int started = 0;
288 int fan_number = (therm_type == ADT7460 && i == 2);
289 int var = th->temps[i] - th->limits[i];
290
291 if (var > -1) {
292 int step = (255 - fan_speed) / 7;
293 int new_speed = 0;
294
295 /* hysteresis : change fan speed only if variation is
296 * more than two degrees */
297 if (abs(var - th->last_var[fan_number]) < 2)
298 continue;
299
300 started = 1;
301 new_speed = fan_speed + ((var-1)*step);
302
303 if (new_speed < fan_speed)
304 new_speed = fan_speed;
305 if (new_speed > 255)
306 new_speed = 255;
307
Ben Collins9f6d4b02006-01-06 00:11:40 -0800308 if (verbose)
309 printk(KERN_DEBUG "adt746x: Setting fans speed to %d "
310 "(limit exceeded by %d on %s) \n",
311 new_speed, var,
312 sensor_location[fan_number+1]);
Linus Torvalds1da177e2005-04-16 15:20:36 -0700313 write_both_fan_speed(th, new_speed);
314 th->last_var[fan_number] = var;
315 } else if (var < -2) {
Colin Leroyd20c5072005-05-25 12:31:35 -0700316 /* don't stop fan if sensor2 is cold and sensor1 is not
Linus Torvalds1da177e2005-04-16 15:20:36 -0700317 * so cold (lastvar >= -1) */
318 if (i == 2 && lastvar < -1) {
319 if (th->last_speed[fan_number] != 0)
Ben Collins9f6d4b02006-01-06 00:11:40 -0800320 if (verbose)
321 printk(KERN_DEBUG "adt746x: Stopping "
322 "fans.\n");
Linus Torvalds1da177e2005-04-16 15:20:36 -0700323 write_both_fan_speed(th, 0);
324 }
325 }
326
327 lastvar = var;
328
329 if (started)
330 return; /* we don't want to re-stop the fan
Colin Leroyd20c5072005-05-25 12:31:35 -0700331 * if sensor1 is heating and sensor2 is not */
Linus Torvalds1da177e2005-04-16 15:20:36 -0700332 }
333}
334
335static int monitor_task(void *arg)
336{
337 struct thermostat* th = arg;
338
339 while(!kthread_should_stop()) {
Christoph Lameter3e1d1d22005-06-24 23:13:50 -0700340 try_to_freeze();
Linus Torvalds1da177e2005-04-16 15:20:36 -0700341 msleep_interruptible(2000);
342
343#ifndef DEBUG
344 if (fan_speed != -1)
345 read_sensors(th);
346#else
347 read_sensors(th);
348#endif
349
350 if (fan_speed != -1)
351 update_fans_speed(th);
352
353#ifdef DEBUG
354 display_stats(th);
355#endif
356
357 }
358
359 return 0;
360}
361
362static void set_limit(struct thermostat *th, int i)
363{
Colin Leroyd20c5072005-05-25 12:31:35 -0700364 /* Set sensor1 limit higher to avoid powerdowns */
Linus Torvalds1da177e2005-04-16 15:20:36 -0700365 th->limits[i] = default_limits_chip[i] + limit_adjust;
366 write_reg(th, LIMIT_REG[i], th->limits[i]);
367
368 /* set our limits to normal */
369 th->limits[i] = default_limits_local[i] + limit_adjust;
370}
371
372static int attach_one_thermostat(struct i2c_adapter *adapter, int addr,
373 int busno)
374{
375 struct thermostat* th;
376 int rc;
377 int i;
378
379 if (thermostat)
380 return 0;
381
382 th = (struct thermostat *)
383 kmalloc(sizeof(struct thermostat), GFP_KERNEL);
384
385 if (!th)
386 return -ENOMEM;
387
388 memset(th, 0, sizeof(*th));
389 th->clt.addr = addr;
390 th->clt.adapter = adapter;
391 th->clt.driver = &thermostat_driver;
392 strcpy(th->clt.name, "thermostat");
393
394 rc = read_reg(th, 0);
395 if (rc < 0) {
396 printk(KERN_ERR "adt746x: Thermostat failed to read config "
397 "from bus %d !\n",
398 busno);
399 kfree(th);
400 return -ENODEV;
401 }
402
403 /* force manual control to start the fan quieter */
404 if (fan_speed == -1)
405 fan_speed = 64;
406
407 if(therm_type == ADT7460) {
408 printk(KERN_INFO "adt746x: ADT7460 initializing\n");
409 /* The 7460 needs to be started explicitly */
410 write_reg(th, CONFIG_REG, 1);
411 } else
412 printk(KERN_INFO "adt746x: ADT7467 initializing\n");
413
414 for (i = 0; i < 3; i++) {
415 th->initial_limits[i] = read_reg(th, LIMIT_REG[i]);
416 set_limit(th, i);
417 }
Ben Collins9f6d4b02006-01-06 00:11:40 -0800418
Linus Torvalds1da177e2005-04-16 15:20:36 -0700419 printk(KERN_INFO "adt746x: Lowering max temperatures from %d, %d, %d"
420 " to %d, %d, %d\n",
421 th->initial_limits[0], th->initial_limits[1],
422 th->initial_limits[2], th->limits[0], th->limits[1],
423 th->limits[2]);
424
425 thermostat = th;
426
427 if (i2c_attach_client(&th->clt)) {
428 printk(KERN_INFO "adt746x: Thermostat failed to attach "
429 "client !\n");
430 thermostat = NULL;
431 kfree(th);
432 return -ENODEV;
433 }
434
435 /* be sure to really write fan speed the first time */
436 th->last_speed[0] = -2;
437 th->last_speed[1] = -2;
438 th->last_var[0] = -80;
439 th->last_var[1] = -80;
440
441 if (fan_speed != -1) {
442 /* manual mode, stop fans */
443 write_both_fan_speed(th, 0);
444 } else {
445 /* automatic mode */
446 write_both_fan_speed(th, -1);
447 }
448
449 thread_therm = kthread_run(monitor_task, th, "kfand");
450
451 if (thread_therm == ERR_PTR(-ENOMEM)) {
452 printk(KERN_INFO "adt746x: Kthread creation failed\n");
453 thread_therm = NULL;
454 return -ENOMEM;
455 }
456
457 return 0;
458}
459
460/*
461 * Now, unfortunately, sysfs doesn't give us a nice void * we could
462 * pass around to the attribute functions, so we don't really have
463 * choice but implement a bunch of them...
464 *
Yani Ioannoue404e272005-05-17 06:42:58 -0400465 * FIXME, it does now...
Linus Torvalds1da177e2005-04-16 15:20:36 -0700466 */
467#define BUILD_SHOW_FUNC_INT(name, data) \
Yani Ioannoue404e272005-05-17 06:42:58 -0400468static ssize_t show_##name(struct device *dev, struct device_attribute *attr, char *buf) \
Linus Torvalds1da177e2005-04-16 15:20:36 -0700469{ \
470 return sprintf(buf, "%d\n", data); \
471}
472
Colin Leroyd20c5072005-05-25 12:31:35 -0700473#define BUILD_SHOW_FUNC_STR(name, data) \
Yani Ioannoue404e272005-05-17 06:42:58 -0400474static ssize_t show_##name(struct device *dev, struct device_attribute *attr, char *buf) \
Colin Leroyd20c5072005-05-25 12:31:35 -0700475{ \
476 return sprintf(buf, "%s\n", data); \
477}
478
Linus Torvalds1da177e2005-04-16 15:20:36 -0700479#define BUILD_SHOW_FUNC_FAN(name, data) \
Yani Ioannoue404e272005-05-17 06:42:58 -0400480static ssize_t show_##name(struct device *dev, struct device_attribute *attr, char *buf) \
Linus Torvalds1da177e2005-04-16 15:20:36 -0700481{ \
482 return sprintf(buf, "%d (%d rpm)\n", \
483 thermostat->last_speed[data], \
484 read_fan_speed(thermostat, FAN_SPEED[data]) \
485 ); \
486}
487
488#define BUILD_STORE_FUNC_DEG(name, data) \
Yani Ioannoue404e272005-05-17 06:42:58 -0400489static ssize_t store_##name(struct device *dev, struct device_attribute *attr, const char *buf, size_t n) \
Linus Torvalds1da177e2005-04-16 15:20:36 -0700490{ \
491 int val; \
492 int i; \
493 val = simple_strtol(buf, NULL, 10); \
Colin Leroyd20c5072005-05-25 12:31:35 -0700494 printk(KERN_INFO "Adjusting limits by %d degrees\n", val); \
Linus Torvalds1da177e2005-04-16 15:20:36 -0700495 limit_adjust = val; \
496 for (i=0; i < 3; i++) \
497 set_limit(thermostat, i); \
498 return n; \
499}
500
501#define BUILD_STORE_FUNC_INT(name, data) \
Yani Ioannoue404e272005-05-17 06:42:58 -0400502static ssize_t store_##name(struct device *dev, struct device_attribute *attr, const char *buf, size_t n) \
Linus Torvalds1da177e2005-04-16 15:20:36 -0700503{ \
504 u32 val; \
505 val = simple_strtoul(buf, NULL, 10); \
506 if (val < 0 || val > 255) \
507 return -EINVAL; \
508 printk(KERN_INFO "Setting specified fan speed to %d\n", val); \
509 data = val; \
510 return n; \
511}
512
Colin Leroyd20c5072005-05-25 12:31:35 -0700513BUILD_SHOW_FUNC_INT(sensor1_temperature, (read_reg(thermostat, TEMP_REG[1])))
514BUILD_SHOW_FUNC_INT(sensor2_temperature, (read_reg(thermostat, TEMP_REG[2])))
515BUILD_SHOW_FUNC_INT(sensor1_limit, thermostat->limits[1])
516BUILD_SHOW_FUNC_INT(sensor2_limit, thermostat->limits[2])
517BUILD_SHOW_FUNC_STR(sensor1_location, sensor_location[1])
518BUILD_SHOW_FUNC_STR(sensor2_location, sensor_location[2])
Linus Torvalds1da177e2005-04-16 15:20:36 -0700519
520BUILD_SHOW_FUNC_INT(specified_fan_speed, fan_speed)
Colin Leroyd20c5072005-05-25 12:31:35 -0700521BUILD_SHOW_FUNC_FAN(sensor1_fan_speed, 0)
522BUILD_SHOW_FUNC_FAN(sensor2_fan_speed, 1)
Linus Torvalds1da177e2005-04-16 15:20:36 -0700523
524BUILD_STORE_FUNC_INT(specified_fan_speed,fan_speed)
525BUILD_SHOW_FUNC_INT(limit_adjust, limit_adjust)
526BUILD_STORE_FUNC_DEG(limit_adjust, thermostat)
527
Colin Leroyd20c5072005-05-25 12:31:35 -0700528static DEVICE_ATTR(sensor1_temperature, S_IRUGO,
529 show_sensor1_temperature,NULL);
530static DEVICE_ATTR(sensor2_temperature, S_IRUGO,
531 show_sensor2_temperature,NULL);
532static DEVICE_ATTR(sensor1_limit, S_IRUGO,
533 show_sensor1_limit, NULL);
534static DEVICE_ATTR(sensor2_limit, S_IRUGO,
535 show_sensor2_limit, NULL);
536static DEVICE_ATTR(sensor1_location, S_IRUGO,
537 show_sensor1_location, NULL);
538static DEVICE_ATTR(sensor2_location, S_IRUGO,
539 show_sensor2_location, NULL);
Linus Torvalds1da177e2005-04-16 15:20:36 -0700540
541static DEVICE_ATTR(specified_fan_speed, S_IRUSR|S_IWUSR|S_IRGRP|S_IROTH,
542 show_specified_fan_speed,store_specified_fan_speed);
543
Colin Leroyd20c5072005-05-25 12:31:35 -0700544static DEVICE_ATTR(sensor1_fan_speed, S_IRUGO,
545 show_sensor1_fan_speed, NULL);
546static DEVICE_ATTR(sensor2_fan_speed, S_IRUGO,
547 show_sensor2_fan_speed, NULL);
Linus Torvalds1da177e2005-04-16 15:20:36 -0700548
549static DEVICE_ATTR(limit_adjust, S_IRUSR|S_IWUSR|S_IRGRP|S_IROTH,
550 show_limit_adjust, store_limit_adjust);
551
552
553static int __init
554thermostat_init(void)
555{
556 struct device_node* np;
Jeremy Kerr018a3d12006-07-12 15:40:29 +1000557 const u32 *prop;
Colin Leroyd20c5072005-05-25 12:31:35 -0700558 int i = 0, offset = 0;
Linus Torvalds1da177e2005-04-16 15:20:36 -0700559
560 np = of_find_node_by_name(NULL, "fan");
561 if (!np)
562 return -ENODEV;
563 if (device_is_compatible(np, "adt7460"))
564 therm_type = ADT7460;
565 else if (device_is_compatible(np, "adt7467"))
566 therm_type = ADT7467;
567 else
568 return -ENODEV;
569
Stephen Rothwell01b27262007-04-27 13:41:15 +1000570 prop = of_get_property(np, "hwsensor-params-version", NULL);
Colin Leroya8bacec2005-05-25 12:31:34 -0700571 printk(KERN_INFO "adt746x: version %d (%ssupported)\n", *prop,
572 (*prop == 1)?"":"un");
573 if (*prop != 1)
574 return -ENODEV;
575
Stephen Rothwell01b27262007-04-27 13:41:15 +1000576 prop = of_get_property(np, "reg", NULL);
Linus Torvalds1da177e2005-04-16 15:20:36 -0700577 if (!prop)
578 return -ENODEV;
579
580 /* look for bus either by path or using "reg" */
581 if (strstr(np->full_name, "/i2c-bus@") != NULL) {
582 const char *tmp_bus = (strstr(np->full_name, "/i2c-bus@") + 9);
583 therm_bus = tmp_bus[0]-'0';
584 } else {
585 therm_bus = ((*prop) >> 8) & 0x0f;
586 }
587
588 therm_address = ((*prop) & 0xff) >> 1;
589
590 printk(KERN_INFO "adt746x: Thermostat bus: %d, address: 0x%02x, "
591 "limit_adjust: %d, fan_speed: %d\n",
592 therm_bus, therm_address, limit_adjust, fan_speed);
593
Stephen Rothwell01b27262007-04-27 13:41:15 +1000594 if (of_get_property(np, "hwsensor-location", NULL)) {
Colin Leroyd20c5072005-05-25 12:31:35 -0700595 for (i = 0; i < 3; i++) {
Stephen Rothwell01b27262007-04-27 13:41:15 +1000596 sensor_location[i] = of_get_property(np,
Colin Leroyd20c5072005-05-25 12:31:35 -0700597 "hwsensor-location", NULL) + offset;
598
599 if (sensor_location[i] == NULL)
600 sensor_location[i] = "";
601
602 printk(KERN_INFO "sensor %d: %s\n", i, sensor_location[i]);
603 offset += strlen(sensor_location[i]) + 1;
604 }
605 } else {
606 sensor_location[0] = "?";
607 sensor_location[1] = "?";
608 sensor_location[2] = "?";
609 }
610
Benjamin Herrenschmidt0365ba72005-09-22 21:44:06 -0700611 of_dev = of_platform_device_create(np, "temperatures", NULL);
Linus Torvalds1da177e2005-04-16 15:20:36 -0700612
613 if (of_dev == NULL) {
614 printk(KERN_ERR "Can't register temperatures device !\n");
615 return -ENODEV;
616 }
617
Colin Leroyd20c5072005-05-25 12:31:35 -0700618 device_create_file(&of_dev->dev, &dev_attr_sensor1_temperature);
619 device_create_file(&of_dev->dev, &dev_attr_sensor2_temperature);
620 device_create_file(&of_dev->dev, &dev_attr_sensor1_limit);
621 device_create_file(&of_dev->dev, &dev_attr_sensor2_limit);
622 device_create_file(&of_dev->dev, &dev_attr_sensor1_location);
623 device_create_file(&of_dev->dev, &dev_attr_sensor2_location);
Linus Torvalds1da177e2005-04-16 15:20:36 -0700624 device_create_file(&of_dev->dev, &dev_attr_limit_adjust);
625 device_create_file(&of_dev->dev, &dev_attr_specified_fan_speed);
Colin Leroyd20c5072005-05-25 12:31:35 -0700626 device_create_file(&of_dev->dev, &dev_attr_sensor1_fan_speed);
Linus Torvalds1da177e2005-04-16 15:20:36 -0700627 if(therm_type == ADT7460)
Colin Leroyd20c5072005-05-25 12:31:35 -0700628 device_create_file(&of_dev->dev, &dev_attr_sensor2_fan_speed);
Linus Torvalds1da177e2005-04-16 15:20:36 -0700629
Benjamin Herrenschmidt4d6c5882006-04-21 15:04:22 +1000630#ifndef CONFIG_I2C_POWERMAC
631 request_module("i2c-powermac");
Linus Torvalds1da177e2005-04-16 15:20:36 -0700632#endif
633
634 return i2c_add_driver(&thermostat_driver);
635}
636
637static void __exit
638thermostat_exit(void)
639{
640 if (of_dev) {
Colin Leroyd20c5072005-05-25 12:31:35 -0700641 device_remove_file(&of_dev->dev, &dev_attr_sensor1_temperature);
642 device_remove_file(&of_dev->dev, &dev_attr_sensor2_temperature);
643 device_remove_file(&of_dev->dev, &dev_attr_sensor1_limit);
644 device_remove_file(&of_dev->dev, &dev_attr_sensor2_limit);
645 device_remove_file(&of_dev->dev, &dev_attr_sensor1_location);
646 device_remove_file(&of_dev->dev, &dev_attr_sensor2_location);
Linus Torvalds1da177e2005-04-16 15:20:36 -0700647 device_remove_file(&of_dev->dev, &dev_attr_limit_adjust);
648 device_remove_file(&of_dev->dev, &dev_attr_specified_fan_speed);
Colin Leroyd20c5072005-05-25 12:31:35 -0700649 device_remove_file(&of_dev->dev, &dev_attr_sensor1_fan_speed);
Linus Torvalds1da177e2005-04-16 15:20:36 -0700650
651 if(therm_type == ADT7460)
652 device_remove_file(&of_dev->dev,
Colin Leroyd20c5072005-05-25 12:31:35 -0700653 &dev_attr_sensor2_fan_speed);
Linus Torvalds1da177e2005-04-16 15:20:36 -0700654
655 of_device_unregister(of_dev);
656 }
657 i2c_del_driver(&thermostat_driver);
658}
659
660module_init(thermostat_init);
661module_exit(thermostat_exit);