blob: 8f5c7b90187de92b11a3ca005d04c532d934048d [file] [log] [blame]
Linus Torvalds1da177e2005-04-16 15:20:36 -07001#
2# Input misc drivers configuration
3#
4menuconfig INPUT_MISC
5 bool "Miscellaneous devices"
6 help
7 Say Y here, and a list of miscellaneous input drivers will be displayed.
8 Everything that didn't fit into the other categories is here. This option
9 doesn't affect the kernel.
10
11 If unsure, say Y.
12
13if INPUT_MISC
14
15config INPUT_PCSPKR
16 tristate "PC Speaker support"
Brian Gerst0d078f62005-10-30 14:59:20 -080017 depends on ALPHA || X86 || MIPS || PPC_PREP || PPC_CHRP || PPC_PSERIES
Linus Torvalds1da177e2005-04-16 15:20:36 -070018 help
19 Say Y here if you want the standard PC Speaker to be used for
20 bells and whistles.
21
22 If unsure, say Y.
23
24 To compile this driver as a module, choose M here: the
25 module will be called pcspkr.
26
27config INPUT_SPARCSPKR
28 tristate "SPARC Speaker support"
David S. Millera2bd4fd2006-06-23 01:44:10 -070029 depends on PCI && SPARC64
Linus Torvalds1da177e2005-04-16 15:20:36 -070030 help
31 Say Y here if you want the standard Speaker on Sparc PCI systems
32 to be used for bells and whistles.
33
34 If unsure, say Y.
35
36 To compile this driver as a module, choose M here: the
37 module will be called sparcspkr.
38
39config INPUT_M68K_BEEP
40 tristate "M68k Beeper support"
41 depends on M68K
42
Dmitry Torokhovba0acb52007-05-07 17:31:32 -040043config INPUT_IXP4XX_BEEPER
44 tristate "IXP4XX Beeper support"
45 depends on ARCH_IXP4XX
46 help
47 If you say yes here, you can connect a beeper to the
48 ixp4xx gpio pins. This is used by the LinkSys NSLU2.
49
50 If unsure, say Y.
51
52 To compile this driver as a module, choose M here: the
53 module will be called ixp4xx-beeper.
54
Yoichi Yuasabebb8a22007-02-18 01:50:18 -050055config INPUT_COBALT_BTNS
56 tristate "Cobalt button interface"
57 depends on MIPS_COBALT
Dmitry Torokhov3d29cdf2007-04-29 23:43:06 -040058 select INPUT_POLLDEV
Yoichi Yuasabebb8a22007-02-18 01:50:18 -050059 help
60 Say Y here if you want to support MIPS Cobalt button interface.
61
62 To compile this driver as a module, choose M here: the
63 module will be called cobalt_btns.
64
Dmitry Torokhov5fc146802005-11-20 00:50:06 -050065config INPUT_WISTRON_BTNS
66 tristate "x86 Wistron laptop button interface"
Andrew Mortone9fb0282005-11-20 00:50:21 -050067 depends on X86 && !X86_64
Dmitry Torokhovc2554c92007-05-22 23:48:39 -040068 select INPUT_POLLDEV
Eric Piel389679d2007-05-21 00:46:31 -040069 select NEW_LEDS
70 select LEDS_CLASS
Geert Uytterhoeven928923c2007-08-22 14:01:36 -070071 select CHECK_SIGNATURE
Dmitry Torokhov5fc146802005-11-20 00:50:06 -050072 help
Matt LaPlante01dd2fb2007-10-20 01:34:40 +020073 Say Y here for support of Wistron laptop button interfaces, used on
Eric Piel389679d2007-05-21 00:46:31 -040074 laptops of various brands, including Acer and Fujitsu-Siemens. If
Matt LaPlante01dd2fb2007-10-20 01:34:40 +020075 available, mail and wifi LEDs will be controllable via /sys/class/leds.
Dmitry Torokhov5fc146802005-11-20 00:50:06 -050076
77 To compile this driver as a module, choose M here: the module will
78 be called wistron_btns.
79
Jaya Kumar31ea7ff2007-02-10 01:29:00 -050080config INPUT_ATLAS_BTNS
81 tristate "x86 Atlas button interface"
82 depends on X86 && ACPI
83 help
84 Say Y here for support of Atlas wallmount touchscreen buttons.
85 The events will show up as scancodes F1 through F9 via evdev.
86
87 To compile this driver as a module, choose M here: the module will
88 be called atlas_btns.
89
Dmitry Torokhovba0acb52007-05-07 17:31:32 -040090config INPUT_ATI_REMOTE
91 tristate "ATI / X10 USB RF remote control"
Al Viro7a86ede2007-05-15 20:36:20 +010092 depends on USB_ARCH_HAS_HCD
Dmitry Torokhovba0acb52007-05-07 17:31:32 -040093 select USB
Alessandro Zummo01387952006-01-29 21:50:40 -050094 help
Dmitry Torokhovba0acb52007-05-07 17:31:32 -040095 Say Y here if you want to use an ATI or X10 "Lola" USB remote control.
96 These are RF remotes with USB receivers.
97 The ATI remote comes with many of ATI's All-In-Wonder video cards.
98 The X10 "Lola" remote is available at:
99 <http://www.x10.com/products/lola_sg1.htm>
100 This driver provides mouse pointer, left and right mouse buttons,
101 and maps all the other remote buttons to keypress events.
Alessandro Zummo01387952006-01-29 21:50:40 -0500102
Dmitry Torokhovba0acb52007-05-07 17:31:32 -0400103 To compile this driver as a module, choose M here: the module will be
104 called ati_remote.
105
106config INPUT_ATI_REMOTE2
107 tristate "ATI / Philips USB RF remote control"
Al Viro7a86ede2007-05-15 20:36:20 +0100108 depends on USB_ARCH_HAS_HCD
Dmitry Torokhovba0acb52007-05-07 17:31:32 -0400109 select USB
110 help
111 Say Y here if you want to use an ATI or Philips USB RF remote control.
112 These are RF remotes with USB receivers.
113 ATI Remote Wonder II comes with some ATI's All-In-Wonder video cards
114 and is also available as a separate product.
115 This driver provides mouse pointer, left and right mouse buttons,
116 and maps all the other remote buttons to keypress events.
117
118 To compile this driver as a module, choose M here: the module will be
119 called ati_remote2.
120
121config INPUT_KEYSPAN_REMOTE
122 tristate "Keyspan DMR USB remote control (EXPERIMENTAL)"
123 depends on EXPERIMENTAL
Al Viro7a86ede2007-05-15 20:36:20 +0100124 depends on USB_ARCH_HAS_HCD
Dmitry Torokhovba0acb52007-05-07 17:31:32 -0400125 select USB
126 help
127 Say Y here if you want to use a Keyspan DMR USB remote control.
128 Currently only the UIA-11 type of receiver has been tested. The tag
129 on the receiver that connects to the USB port should have a P/N that
130 will tell you what type of DMR you have. The UIA-10 type is not
131 supported at this time. This driver maps all buttons to keypress
132 events.
133
134 To compile this driver as a module, choose M here: the module will
135 be called keyspan_remote.
136
137config INPUT_POWERMATE
138 tristate "Griffin PowerMate and Contour Jog support"
Al Viro7a86ede2007-05-15 20:36:20 +0100139 depends on USB_ARCH_HAS_HCD
Dmitry Torokhovba0acb52007-05-07 17:31:32 -0400140 select USB
141 help
142 Say Y here if you want to use Griffin PowerMate or Contour Jog devices.
143 These are aluminum dials which can measure clockwise and anticlockwise
144 rotation. The dial also acts as a pushbutton. The base contains an LED
145 which can be instructed to pulse or to switch to a particular intensity.
146
147 You can download userspace tools from
148 <http://sowerbutts.com/powermate/>.
Alessandro Zummo01387952006-01-29 21:50:40 -0500149
150 To compile this driver as a module, choose M here: the
Dmitry Torokhovba0acb52007-05-07 17:31:32 -0400151 module will be called powermate.
152
153config INPUT_YEALINK
154 tristate "Yealink usb-p1k voip phone"
Adrian Bunk247537b2007-09-26 20:02:52 +0200155 depends on EXPERIMENTAL
Al Viro7a86ede2007-05-15 20:36:20 +0100156 depends on USB_ARCH_HAS_HCD
Dmitry Torokhovba0acb52007-05-07 17:31:32 -0400157 select USB
158 help
159 Say Y here if you want to enable keyboard and LCD functions of the
160 Yealink usb-p1k usb phones. The audio part is enabled by the generic
161 usb sound driver, so you might want to enable that as well.
162
163 For information about how to use these additional functions, see
164 <file:Documentation/input/yealink.txt>.
165
166 To compile this driver as a module, choose M here: the module will be
167 called yealink.
Alessandro Zummo01387952006-01-29 21:50:40 -0500168
Linus Torvalds1da177e2005-04-16 15:20:36 -0700169config INPUT_UINPUT
170 tristate "User level driver support"
171 help
172 Say Y here if you want to support user level drivers for input
173 subsystem accessible under char device 10:223 - /dev/input/uinput.
174
175 To compile this driver as a module, choose M here: the
176 module will be called uinput.
177
178config HP_SDC_RTC
Yoichi Yuasabebb8a22007-02-18 01:50:18 -0500179 tristate "HP SDC Real Time Clock"
Geert Uytterhoevenda96d0b2006-10-09 22:22:37 +0200180 depends on GSC || HP300
Linus Torvalds1da177e2005-04-16 15:20:36 -0700181 select HP_SDC
182 help
183 Say Y here if you want to support the built-in real time clock
184 of the HP SDC controller.
185
186endif