blob: 7e03f41ae2c2c817f17a776ba02d0c7731f75236 [file] [log] [blame]
Linus Torvalds1da177e2005-04-16 15:20:36 -07001/*
2 * Copyright(c) 1999 - 2004 Intel Corporation. All rights reserved.
3 *
4 * This program is free software; you can redistribute it and/or modify it
5 * under the terms of the GNU General Public License as published by the Free
6 * Software Foundation; either version 2 of the License, or (at your option)
7 * any later version.
8 *
9 * This program is distributed in the hope that it will be useful, but WITHOUT
10 * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
11 * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
12 * more details.
13 *
14 * You should have received a copy of the GNU General Public License along with
15 * this program; if not, write to the Free Software Foundation, Inc., 59
16 * Temple Place - Suite 330, Boston, MA 02111-1307, USA.
17 *
18 * The full GNU General Public License is included in this distribution in the
19 * file called LICENSE.
20 *
Linus Torvalds1da177e2005-04-16 15:20:36 -070021 */
22
23//#define BONDING_DEBUG 1
24
25#include <linux/skbuff.h>
26#include <linux/if_ether.h>
27#include <linux/netdevice.h>
28#include <linux/spinlock.h>
29#include <linux/ethtool.h>
30#include <linux/if_bonding.h>
31#include <linux/pkt_sched.h>
32#include "bonding.h"
33#include "bond_3ad.h"
34
35// General definitions
36#define AD_SHORT_TIMEOUT 1
37#define AD_LONG_TIMEOUT 0
38#define AD_STANDBY 0x2
39#define AD_MAX_TX_IN_SECOND 3
40#define AD_COLLECTOR_MAX_DELAY 0
41
42// Timer definitions(43.4.4 in the 802.3ad standard)
43#define AD_FAST_PERIODIC_TIME 1
44#define AD_SLOW_PERIODIC_TIME 30
45#define AD_SHORT_TIMEOUT_TIME (3*AD_FAST_PERIODIC_TIME)
46#define AD_LONG_TIMEOUT_TIME (3*AD_SLOW_PERIODIC_TIME)
47#define AD_CHURN_DETECTION_TIME 60
48#define AD_AGGREGATE_WAIT_TIME 2
49
50// Port state definitions(43.4.2.2 in the 802.3ad standard)
51#define AD_STATE_LACP_ACTIVITY 0x1
52#define AD_STATE_LACP_TIMEOUT 0x2
53#define AD_STATE_AGGREGATION 0x4
54#define AD_STATE_SYNCHRONIZATION 0x8
55#define AD_STATE_COLLECTING 0x10
56#define AD_STATE_DISTRIBUTING 0x20
57#define AD_STATE_DEFAULTED 0x40
58#define AD_STATE_EXPIRED 0x80
59
60// Port Variables definitions used by the State Machines(43.4.7 in the 802.3ad standard)
61#define AD_PORT_BEGIN 0x1
62#define AD_PORT_LACP_ENABLED 0x2
63#define AD_PORT_ACTOR_CHURN 0x4
64#define AD_PORT_PARTNER_CHURN 0x8
65#define AD_PORT_READY 0x10
66#define AD_PORT_READY_N 0x20
67#define AD_PORT_MATCHED 0x40
68#define AD_PORT_STANDBY 0x80
69#define AD_PORT_SELECTED 0x100
70#define AD_PORT_MOVED 0x200
71
72// Port Key definitions
73// key is determined according to the link speed, duplex and
74// user key(which is yet not supported)
75// ------------------------------------------------------------
76// Port key : | User key | Speed |Duplex|
77// ------------------------------------------------------------
78// 16 6 1 0
79#define AD_DUPLEX_KEY_BITS 0x1
80#define AD_SPEED_KEY_BITS 0x3E
81#define AD_USER_KEY_BITS 0xFFC0
82
83//dalloun
84#define AD_LINK_SPEED_BITMASK_1MBPS 0x1
85#define AD_LINK_SPEED_BITMASK_10MBPS 0x2
86#define AD_LINK_SPEED_BITMASK_100MBPS 0x4
87#define AD_LINK_SPEED_BITMASK_1000MBPS 0x8
Jay Vosburgh94dbffd2006-09-22 21:52:15 -070088#define AD_LINK_SPEED_BITMASK_10000MBPS 0x10
Linus Torvalds1da177e2005-04-16 15:20:36 -070089//endalloun
90
91// compare MAC addresses
92#define MAC_ADDRESS_COMPARE(A, B) memcmp(A, B, ETH_ALEN)
93
94static struct mac_addr null_mac_addr = {{0, 0, 0, 0, 0, 0}};
95static u16 ad_ticks_per_sec;
96static const int ad_delta_in_ticks = (AD_TIMER_INTERVAL * HZ) / 1000;
97
98// ================= 3AD api to bonding and kernel code ==================
99static u16 __get_link_speed(struct port *port);
100static u8 __get_duplex(struct port *port);
101static inline void __initialize_port_locks(struct port *port);
102//conversions
Jay Vosburgh89cc76f2006-09-22 21:55:32 -0700103static void __htons_lacpdu(struct lacpdu *lacpdu);
Linus Torvalds1da177e2005-04-16 15:20:36 -0700104static u16 __ad_timer_to_ticks(u16 timer_type, u16 Par);
105
106
107// ================= ad code helper functions ==================
108//needed by ad_rx_machine(...)
109static void __record_pdu(struct lacpdu *lacpdu, struct port *port);
110static void __record_default(struct port *port);
111static void __update_selected(struct lacpdu *lacpdu, struct port *port);
112static void __update_default_selected(struct port *port);
113static void __choose_matched(struct lacpdu *lacpdu, struct port *port);
114static void __update_ntt(struct lacpdu *lacpdu, struct port *port);
115
116//needed for ad_mux_machine(..)
117static void __attach_bond_to_agg(struct port *port);
118static void __detach_bond_from_agg(struct port *port);
119static int __agg_ports_are_ready(struct aggregator *aggregator);
120static void __set_agg_ports_ready(struct aggregator *aggregator, int val);
121
122//needed for ad_agg_selection_logic(...)
123static u32 __get_agg_bandwidth(struct aggregator *aggregator);
124static struct aggregator *__get_active_agg(struct aggregator *aggregator);
125
126
127// ================= main 802.3ad protocol functions ==================
128static int ad_lacpdu_send(struct port *port);
129static int ad_marker_send(struct port *port, struct marker *marker);
130static void ad_mux_machine(struct port *port);
131static void ad_rx_machine(struct lacpdu *lacpdu, struct port *port);
132static void ad_tx_machine(struct port *port);
133static void ad_periodic_machine(struct port *port);
134static void ad_port_selection_logic(struct port *port);
135static void ad_agg_selection_logic(struct aggregator *aggregator);
136static void ad_clear_agg(struct aggregator *aggregator);
137static void ad_initialize_agg(struct aggregator *aggregator);
138static void ad_initialize_port(struct port *port, int lacp_fast);
139static void ad_initialize_lacpdu(struct lacpdu *Lacpdu);
140static void ad_enable_collecting_distributing(struct port *port);
141static void ad_disable_collecting_distributing(struct port *port);
142static void ad_marker_info_received(struct marker *marker_info, struct port *port);
143static void ad_marker_response_received(struct marker *marker, struct port *port);
144
145
146/////////////////////////////////////////////////////////////////////////////////
147// ================= api to bonding and kernel code ==================
148/////////////////////////////////////////////////////////////////////////////////
149
150/**
151 * __get_bond_by_port - get the port's bonding struct
152 * @port: the port we're looking at
153 *
154 * Return @port's bonding struct, or %NULL if it can't be found.
155 */
156static inline struct bonding *__get_bond_by_port(struct port *port)
157{
158 if (port->slave == NULL) {
159 return NULL;
160 }
161
162 return bond_get_bond_by_slave(port->slave);
163}
164
165/**
166 * __get_first_port - get the first port in the bond
167 * @bond: the bond we're looking at
168 *
169 * Return the port of the first slave in @bond, or %NULL if it can't be found.
170 */
171static inline struct port *__get_first_port(struct bonding *bond)
172{
173 if (bond->slave_cnt == 0) {
174 return NULL;
175 }
176
177 return &(SLAVE_AD_INFO(bond->first_slave).port);
178}
179
180/**
181 * __get_next_port - get the next port in the bond
182 * @port: the port we're looking at
183 *
184 * Return the port of the slave that is next in line of @port's slave in the
185 * bond, or %NULL if it can't be found.
186 */
187static inline struct port *__get_next_port(struct port *port)
188{
189 struct bonding *bond = __get_bond_by_port(port);
190 struct slave *slave = port->slave;
191
192 // If there's no bond for this port, or this is the last slave
193 if ((bond == NULL) || (slave->next == bond->first_slave)) {
194 return NULL;
195 }
196
197 return &(SLAVE_AD_INFO(slave->next).port);
198}
199
200/**
201 * __get_first_agg - get the first aggregator in the bond
202 * @bond: the bond we're looking at
203 *
204 * Return the aggregator of the first slave in @bond, or %NULL if it can't be
205 * found.
206 */
207static inline struct aggregator *__get_first_agg(struct port *port)
208{
209 struct bonding *bond = __get_bond_by_port(port);
210
211 // If there's no bond for this port, or bond has no slaves
212 if ((bond == NULL) || (bond->slave_cnt == 0)) {
213 return NULL;
214 }
215
216 return &(SLAVE_AD_INFO(bond->first_slave).aggregator);
217}
218
219/**
220 * __get_next_agg - get the next aggregator in the bond
221 * @aggregator: the aggregator we're looking at
222 *
223 * Return the aggregator of the slave that is next in line of @aggregator's
224 * slave in the bond, or %NULL if it can't be found.
225 */
226static inline struct aggregator *__get_next_agg(struct aggregator *aggregator)
227{
228 struct slave *slave = aggregator->slave;
229 struct bonding *bond = bond_get_bond_by_slave(slave);
230
231 // If there's no bond for this aggregator, or this is the last slave
232 if ((bond == NULL) || (slave->next == bond->first_slave)) {
233 return NULL;
234 }
235
236 return &(SLAVE_AD_INFO(slave->next).aggregator);
237}
238
239/**
240 * __disable_port - disable the port's slave
241 * @port: the port we're looking at
242 *
243 */
244static inline void __disable_port(struct port *port)
245{
246 bond_set_slave_inactive_flags(port->slave);
247}
248
249/**
250 * __enable_port - enable the port's slave, if it's up
251 * @port: the port we're looking at
252 *
253 */
254static inline void __enable_port(struct port *port)
255{
256 struct slave *slave = port->slave;
257
258 if ((slave->link == BOND_LINK_UP) && IS_UP(slave->dev)) {
259 bond_set_slave_active_flags(slave);
260 }
261}
262
263/**
264 * __port_is_enabled - check if the port's slave is in active state
265 * @port: the port we're looking at
266 *
267 */
268static inline int __port_is_enabled(struct port *port)
269{
270 return(port->slave->state == BOND_STATE_ACTIVE);
271}
272
273/**
274 * __get_agg_selection_mode - get the aggregator selection mode
275 * @port: the port we're looking at
276 *
277 * Get the aggregator selection mode. Can be %BANDWIDTH or %COUNT.
278 */
279static inline u32 __get_agg_selection_mode(struct port *port)
280{
281 struct bonding *bond = __get_bond_by_port(port);
282
283 if (bond == NULL) {
284 return AD_BANDWIDTH;
285 }
286
287 return BOND_AD_INFO(bond).agg_select_mode;
288}
289
290/**
291 * __check_agg_selection_timer - check if the selection timer has expired
292 * @port: the port we're looking at
293 *
294 */
295static inline int __check_agg_selection_timer(struct port *port)
296{
297 struct bonding *bond = __get_bond_by_port(port);
298
299 if (bond == NULL) {
300 return 0;
301 }
302
303 return BOND_AD_INFO(bond).agg_select_timer ? 1 : 0;
304}
305
306/**
307 * __get_rx_machine_lock - lock the port's RX machine
308 * @port: the port we're looking at
309 *
310 */
311static inline void __get_rx_machine_lock(struct port *port)
312{
313 spin_lock(&(SLAVE_AD_INFO(port->slave).rx_machine_lock));
314}
315
316/**
317 * __release_rx_machine_lock - unlock the port's RX machine
318 * @port: the port we're looking at
319 *
320 */
321static inline void __release_rx_machine_lock(struct port *port)
322{
323 spin_unlock(&(SLAVE_AD_INFO(port->slave).rx_machine_lock));
324}
325
326/**
327 * __get_link_speed - get a port's speed
328 * @port: the port we're looking at
329 *
330 * Return @port's speed in 802.3ad bitmask format. i.e. one of:
331 * 0,
332 * %AD_LINK_SPEED_BITMASK_10MBPS,
333 * %AD_LINK_SPEED_BITMASK_100MBPS,
Jay Vosburgh94dbffd2006-09-22 21:52:15 -0700334 * %AD_LINK_SPEED_BITMASK_1000MBPS,
335 * %AD_LINK_SPEED_BITMASK_10000MBPS
Linus Torvalds1da177e2005-04-16 15:20:36 -0700336 */
337static u16 __get_link_speed(struct port *port)
338{
339 struct slave *slave = port->slave;
340 u16 speed;
341
342 /* this if covers only a special case: when the configuration starts with
343 * link down, it sets the speed to 0.
344 * This is done in spite of the fact that the e100 driver reports 0 to be
345 * compatible with MVT in the future.*/
346 if (slave->link != BOND_LINK_UP) {
347 speed=0;
348 } else {
349 switch (slave->speed) {
350 case SPEED_10:
351 speed = AD_LINK_SPEED_BITMASK_10MBPS;
352 break;
353
354 case SPEED_100:
355 speed = AD_LINK_SPEED_BITMASK_100MBPS;
356 break;
357
358 case SPEED_1000:
359 speed = AD_LINK_SPEED_BITMASK_1000MBPS;
360 break;
361
Jay Vosburgh94dbffd2006-09-22 21:52:15 -0700362 case SPEED_10000:
363 speed = AD_LINK_SPEED_BITMASK_10000MBPS;
364 break;
365
Linus Torvalds1da177e2005-04-16 15:20:36 -0700366 default:
367 speed = 0; // unknown speed value from ethtool. shouldn't happen
368 break;
369 }
370 }
371
372 dprintk("Port %d Received link speed %d update from adapter\n", port->actor_port_number, speed);
373 return speed;
374}
375
376/**
377 * __get_duplex - get a port's duplex
378 * @port: the port we're looking at
379 *
380 * Return @port's duplex in 802.3ad bitmask format. i.e.:
381 * 0x01 if in full duplex
382 * 0x00 otherwise
383 */
384static u8 __get_duplex(struct port *port)
385{
386 struct slave *slave = port->slave;
387
388 u8 retval;
389
390 // handling a special case: when the configuration starts with
391 // link down, it sets the duplex to 0.
392 if (slave->link != BOND_LINK_UP) {
393 retval=0x0;
394 } else {
395 switch (slave->duplex) {
396 case DUPLEX_FULL:
397 retval=0x1;
398 dprintk("Port %d Received status full duplex update from adapter\n", port->actor_port_number);
399 break;
400 case DUPLEX_HALF:
401 default:
402 retval=0x0;
403 dprintk("Port %d Received status NOT full duplex update from adapter\n", port->actor_port_number);
404 break;
405 }
406 }
407 return retval;
408}
409
410/**
411 * __initialize_port_locks - initialize a port's RX machine spinlock
412 * @port: the port we're looking at
413 *
414 */
415static inline void __initialize_port_locks(struct port *port)
416{
417 // make sure it isn't called twice
418 spin_lock_init(&(SLAVE_AD_INFO(port->slave).rx_machine_lock));
419}
420
421//conversions
422/**
Jay Vosburgh89cc76f2006-09-22 21:55:32 -0700423 * __htons_lacpdu - convert the contents of a LACPDU to network byte order
Linus Torvalds1da177e2005-04-16 15:20:36 -0700424 * @lacpdu: the speicifed lacpdu
425 *
426 * For each multi-byte field in the lacpdu, convert its content
427 */
Jay Vosburgh89cc76f2006-09-22 21:55:32 -0700428static void __htons_lacpdu(struct lacpdu *lacpdu)
Linus Torvalds1da177e2005-04-16 15:20:36 -0700429{
430 if (lacpdu) {
Jay Vosburgh89cc76f2006-09-22 21:55:32 -0700431 lacpdu->actor_system_priority = htons(lacpdu->actor_system_priority);
432 lacpdu->actor_key = htons(lacpdu->actor_key);
433 lacpdu->actor_port_priority = htons(lacpdu->actor_port_priority);
434 lacpdu->actor_port = htons(lacpdu->actor_port);
435 lacpdu->partner_system_priority = htons(lacpdu->partner_system_priority);
436 lacpdu->partner_key = htons(lacpdu->partner_key);
437 lacpdu->partner_port_priority = htons(lacpdu->partner_port_priority);
438 lacpdu->partner_port = htons(lacpdu->partner_port);
439 lacpdu->collector_max_delay = htons(lacpdu->collector_max_delay);
Linus Torvalds1da177e2005-04-16 15:20:36 -0700440 }
441}
442
443/**
444 * __ad_timer_to_ticks - convert a given timer type to AD module ticks
445 * @timer_type: which timer to operate
446 * @par: timer parameter. see below
447 *
448 * If @timer_type is %current_while_timer, @par indicates long/short timer.
449 * If @timer_type is %periodic_timer, @par is one of %FAST_PERIODIC_TIME,
450 * %SLOW_PERIODIC_TIME.
451 */
452static u16 __ad_timer_to_ticks(u16 timer_type, u16 par)
453{
454 u16 retval=0; //to silence the compiler
455
456 switch (timer_type) {
457 case AD_CURRENT_WHILE_TIMER: // for rx machine usage
458 if (par) { // for short or long timeout
459 retval = (AD_SHORT_TIMEOUT_TIME*ad_ticks_per_sec); // short timeout
460 } else {
461 retval = (AD_LONG_TIMEOUT_TIME*ad_ticks_per_sec); // long timeout
462 }
463 break;
464 case AD_ACTOR_CHURN_TIMER: // for local churn machine
465 retval = (AD_CHURN_DETECTION_TIME*ad_ticks_per_sec);
466 break;
467 case AD_PERIODIC_TIMER: // for periodic machine
468 retval = (par*ad_ticks_per_sec); // long timeout
469 break;
470 case AD_PARTNER_CHURN_TIMER: // for remote churn machine
471 retval = (AD_CHURN_DETECTION_TIME*ad_ticks_per_sec);
472 break;
473 case AD_WAIT_WHILE_TIMER: // for selection machine
474 retval = (AD_AGGREGATE_WAIT_TIME*ad_ticks_per_sec);
475 break;
476 }
477 return retval;
478}
479
480
481/////////////////////////////////////////////////////////////////////////////////
482// ================= ad_rx_machine helper functions ==================
483/////////////////////////////////////////////////////////////////////////////////
484
485/**
486 * __record_pdu - record parameters from a received lacpdu
487 * @lacpdu: the lacpdu we've received
488 * @port: the port we're looking at
489 *
490 * Record the parameter values for the Actor carried in a received lacpdu as
491 * the current partner operational parameter values and sets
492 * actor_oper_port_state.defaulted to FALSE.
493 */
494static void __record_pdu(struct lacpdu *lacpdu, struct port *port)
495{
496 // validate lacpdu and port
497 if (lacpdu && port) {
498 // record the new parameter values for the partner operational
Jay Vosburgh89cc76f2006-09-22 21:55:32 -0700499 port->partner_oper_port_number = ntohs(lacpdu->actor_port);
500 port->partner_oper_port_priority = ntohs(lacpdu->actor_port_priority);
Linus Torvalds1da177e2005-04-16 15:20:36 -0700501 port->partner_oper_system = lacpdu->actor_system;
Jay Vosburgh89cc76f2006-09-22 21:55:32 -0700502 port->partner_oper_system_priority = ntohs(lacpdu->actor_system_priority);
503 port->partner_oper_key = ntohs(lacpdu->actor_key);
Linus Torvalds1da177e2005-04-16 15:20:36 -0700504 // zero partener's lase states
505 port->partner_oper_port_state = 0;
506 port->partner_oper_port_state |= (lacpdu->actor_state & AD_STATE_LACP_ACTIVITY);
507 port->partner_oper_port_state |= (lacpdu->actor_state & AD_STATE_LACP_TIMEOUT);
508 port->partner_oper_port_state |= (lacpdu->actor_state & AD_STATE_AGGREGATION);
509 port->partner_oper_port_state |= (lacpdu->actor_state & AD_STATE_SYNCHRONIZATION);
510 port->partner_oper_port_state |= (lacpdu->actor_state & AD_STATE_COLLECTING);
511 port->partner_oper_port_state |= (lacpdu->actor_state & AD_STATE_DISTRIBUTING);
512 port->partner_oper_port_state |= (lacpdu->actor_state & AD_STATE_DEFAULTED);
513 port->partner_oper_port_state |= (lacpdu->actor_state & AD_STATE_EXPIRED);
514
515 // set actor_oper_port_state.defaulted to FALSE
516 port->actor_oper_port_state &= ~AD_STATE_DEFAULTED;
517
518 // set the partner sync. to on if the partner is sync. and the port is matched
519 if ((port->sm_vars & AD_PORT_MATCHED) && (lacpdu->actor_state & AD_STATE_SYNCHRONIZATION)) {
520 port->partner_oper_port_state |= AD_STATE_SYNCHRONIZATION;
521 } else {
522 port->partner_oper_port_state &= ~AD_STATE_SYNCHRONIZATION;
523 }
524 }
525}
526
527/**
528 * __record_default - record default parameters
529 * @port: the port we're looking at
530 *
531 * This function records the default parameter values for the partner carried
532 * in the Partner Admin parameters as the current partner operational parameter
533 * values and sets actor_oper_port_state.defaulted to TRUE.
534 */
535static void __record_default(struct port *port)
536{
537 // validate the port
538 if (port) {
539 // record the partner admin parameters
540 port->partner_oper_port_number = port->partner_admin_port_number;
541 port->partner_oper_port_priority = port->partner_admin_port_priority;
542 port->partner_oper_system = port->partner_admin_system;
543 port->partner_oper_system_priority = port->partner_admin_system_priority;
544 port->partner_oper_key = port->partner_admin_key;
545 port->partner_oper_port_state = port->partner_admin_port_state;
546
547 // set actor_oper_port_state.defaulted to true
548 port->actor_oper_port_state |= AD_STATE_DEFAULTED;
549 }
550}
551
552/**
553 * __update_selected - update a port's Selected variable from a received lacpdu
554 * @lacpdu: the lacpdu we've received
555 * @port: the port we're looking at
556 *
557 * Update the value of the selected variable, using parameter values from a
558 * newly received lacpdu. The parameter values for the Actor carried in the
559 * received PDU are compared with the corresponding operational parameter
560 * values for the ports partner. If one or more of the comparisons shows that
561 * the value(s) received in the PDU differ from the current operational values,
562 * then selected is set to FALSE and actor_oper_port_state.synchronization is
563 * set to out_of_sync. Otherwise, selected remains unchanged.
564 */
565static void __update_selected(struct lacpdu *lacpdu, struct port *port)
566{
567 // validate lacpdu and port
568 if (lacpdu && port) {
569 // check if any parameter is different
Jay Vosburgh89cc76f2006-09-22 21:55:32 -0700570 if ((ntohs(lacpdu->actor_port) != port->partner_oper_port_number) ||
571 (ntohs(lacpdu->actor_port_priority) != port->partner_oper_port_priority) ||
Linus Torvalds1da177e2005-04-16 15:20:36 -0700572 MAC_ADDRESS_COMPARE(&(lacpdu->actor_system), &(port->partner_oper_system)) ||
Jay Vosburgh89cc76f2006-09-22 21:55:32 -0700573 (ntohs(lacpdu->actor_system_priority) != port->partner_oper_system_priority) ||
574 (ntohs(lacpdu->actor_key) != port->partner_oper_key) ||
Linus Torvalds1da177e2005-04-16 15:20:36 -0700575 ((lacpdu->actor_state & AD_STATE_AGGREGATION) != (port->partner_oper_port_state & AD_STATE_AGGREGATION))
576 ) {
577 // update the state machine Selected variable
578 port->sm_vars &= ~AD_PORT_SELECTED;
579 }
580 }
581}
582
583/**
584 * __update_default_selected - update a port's Selected variable from Partner
585 * @port: the port we're looking at
586 *
587 * This function updates the value of the selected variable, using the partner
588 * administrative parameter values. The administrative values are compared with
589 * the corresponding operational parameter values for the partner. If one or
590 * more of the comparisons shows that the administrative value(s) differ from
591 * the current operational values, then Selected is set to FALSE and
592 * actor_oper_port_state.synchronization is set to OUT_OF_SYNC. Otherwise,
593 * Selected remains unchanged.
594 */
595static void __update_default_selected(struct port *port)
596{
597 // validate the port
598 if (port) {
599 // check if any parameter is different
600 if ((port->partner_admin_port_number != port->partner_oper_port_number) ||
601 (port->partner_admin_port_priority != port->partner_oper_port_priority) ||
602 MAC_ADDRESS_COMPARE(&(port->partner_admin_system), &(port->partner_oper_system)) ||
603 (port->partner_admin_system_priority != port->partner_oper_system_priority) ||
604 (port->partner_admin_key != port->partner_oper_key) ||
605 ((port->partner_admin_port_state & AD_STATE_AGGREGATION) != (port->partner_oper_port_state & AD_STATE_AGGREGATION))
606 ) {
607 // update the state machine Selected variable
608 port->sm_vars &= ~AD_PORT_SELECTED;
609 }
610 }
611}
612
613/**
614 * __choose_matched - update a port's matched variable from a received lacpdu
615 * @lacpdu: the lacpdu we've received
616 * @port: the port we're looking at
617 *
618 * Update the value of the matched variable, using parameter values from a
619 * newly received lacpdu. Parameter values for the partner carried in the
620 * received PDU are compared with the corresponding operational parameter
621 * values for the actor. Matched is set to TRUE if all of these parameters
622 * match and the PDU parameter partner_state.aggregation has the same value as
623 * actor_oper_port_state.aggregation and lacp will actively maintain the link
624 * in the aggregation. Matched is also set to TRUE if the value of
625 * actor_state.aggregation in the received PDU is set to FALSE, i.e., indicates
626 * an individual link and lacp will actively maintain the link. Otherwise,
627 * matched is set to FALSE. LACP is considered to be actively maintaining the
628 * link if either the PDU's actor_state.lacp_activity variable is TRUE or both
629 * the actor's actor_oper_port_state.lacp_activity and the PDU's
630 * partner_state.lacp_activity variables are TRUE.
631 */
632static void __choose_matched(struct lacpdu *lacpdu, struct port *port)
633{
634 // validate lacpdu and port
635 if (lacpdu && port) {
636 // check if all parameters are alike
Jay Vosburgh89cc76f2006-09-22 21:55:32 -0700637 if (((ntohs(lacpdu->partner_port) == port->actor_port_number) &&
638 (ntohs(lacpdu->partner_port_priority) == port->actor_port_priority) &&
Linus Torvalds1da177e2005-04-16 15:20:36 -0700639 !MAC_ADDRESS_COMPARE(&(lacpdu->partner_system), &(port->actor_system)) &&
Jay Vosburgh89cc76f2006-09-22 21:55:32 -0700640 (ntohs(lacpdu->partner_system_priority) == port->actor_system_priority) &&
641 (ntohs(lacpdu->partner_key) == port->actor_oper_port_key) &&
Linus Torvalds1da177e2005-04-16 15:20:36 -0700642 ((lacpdu->partner_state & AD_STATE_AGGREGATION) == (port->actor_oper_port_state & AD_STATE_AGGREGATION))) ||
643 // or this is individual link(aggregation == FALSE)
644 ((lacpdu->actor_state & AD_STATE_AGGREGATION) == 0)
645 ) {
646 // update the state machine Matched variable
647 port->sm_vars |= AD_PORT_MATCHED;
648 } else {
649 port->sm_vars &= ~AD_PORT_MATCHED;
650 }
651 }
652}
653
654/**
655 * __update_ntt - update a port's ntt variable from a received lacpdu
656 * @lacpdu: the lacpdu we've received
657 * @port: the port we're looking at
658 *
659 * Updates the value of the ntt variable, using parameter values from a newly
660 * received lacpdu. The parameter values for the partner carried in the
661 * received PDU are compared with the corresponding operational parameter
662 * values for the Actor. If one or more of the comparisons shows that the
663 * value(s) received in the PDU differ from the current operational values,
664 * then ntt is set to TRUE. Otherwise, ntt remains unchanged.
665 */
666static void __update_ntt(struct lacpdu *lacpdu, struct port *port)
667{
668 // validate lacpdu and port
669 if (lacpdu && port) {
670 // check if any parameter is different
Jay Vosburgh89cc76f2006-09-22 21:55:32 -0700671 if ((ntohs(lacpdu->partner_port) != port->actor_port_number) ||
672 (ntohs(lacpdu->partner_port_priority) != port->actor_port_priority) ||
Linus Torvalds1da177e2005-04-16 15:20:36 -0700673 MAC_ADDRESS_COMPARE(&(lacpdu->partner_system), &(port->actor_system)) ||
Jay Vosburgh89cc76f2006-09-22 21:55:32 -0700674 (ntohs(lacpdu->partner_system_priority) != port->actor_system_priority) ||
675 (ntohs(lacpdu->partner_key) != port->actor_oper_port_key) ||
Linus Torvalds1da177e2005-04-16 15:20:36 -0700676 ((lacpdu->partner_state & AD_STATE_LACP_ACTIVITY) != (port->actor_oper_port_state & AD_STATE_LACP_ACTIVITY)) ||
677 ((lacpdu->partner_state & AD_STATE_LACP_TIMEOUT) != (port->actor_oper_port_state & AD_STATE_LACP_TIMEOUT)) ||
678 ((lacpdu->partner_state & AD_STATE_SYNCHRONIZATION) != (port->actor_oper_port_state & AD_STATE_SYNCHRONIZATION)) ||
679 ((lacpdu->partner_state & AD_STATE_AGGREGATION) != (port->actor_oper_port_state & AD_STATE_AGGREGATION))
680 ) {
681 // set ntt to be TRUE
682 port->ntt = 1;
683 }
684 }
685}
686
687/**
688 * __attach_bond_to_agg
689 * @port: the port we're looking at
690 *
691 * Handle the attaching of the port's control parser/multiplexer and the
692 * aggregator. This function does nothing since the parser/multiplexer of the
693 * receive and the parser/multiplexer of the aggregator are already combined.
694 */
695static void __attach_bond_to_agg(struct port *port)
696{
697 port=NULL; // just to satisfy the compiler
698 // This function does nothing since the parser/multiplexer of the receive
699 // and the parser/multiplexer of the aggregator are already combined
700}
701
702/**
703 * __detach_bond_from_agg
704 * @port: the port we're looking at
705 *
706 * Handle the detaching of the port's control parser/multiplexer from the
707 * aggregator. This function does nothing since the parser/multiplexer of the
708 * receive and the parser/multiplexer of the aggregator are already combined.
709 */
710static void __detach_bond_from_agg(struct port *port)
711{
712 port=NULL; // just to satisfy the compiler
713 // This function does nothing sience the parser/multiplexer of the receive
714 // and the parser/multiplexer of the aggregator are already combined
715}
716
717/**
718 * __agg_ports_are_ready - check if all ports in an aggregator are ready
719 * @aggregator: the aggregator we're looking at
720 *
721 */
722static int __agg_ports_are_ready(struct aggregator *aggregator)
723{
724 struct port *port;
725 int retval = 1;
726
727 if (aggregator) {
728 // scan all ports in this aggregator to verfy if they are all ready
729 for (port=aggregator->lag_ports; port; port=port->next_port_in_aggregator) {
730 if (!(port->sm_vars & AD_PORT_READY_N)) {
731 retval = 0;
732 break;
733 }
734 }
735 }
736
737 return retval;
738}
739
740/**
741 * __set_agg_ports_ready - set value of Ready bit in all ports of an aggregator
742 * @aggregator: the aggregator we're looking at
743 * @val: Should the ports' ready bit be set on or off
744 *
745 */
746static void __set_agg_ports_ready(struct aggregator *aggregator, int val)
747{
748 struct port *port;
749
750 for (port=aggregator->lag_ports; port; port=port->next_port_in_aggregator) {
751 if (val) {
752 port->sm_vars |= AD_PORT_READY;
753 } else {
754 port->sm_vars &= ~AD_PORT_READY;
755 }
756 }
757}
758
759/**
760 * __get_agg_bandwidth - get the total bandwidth of an aggregator
761 * @aggregator: the aggregator we're looking at
762 *
763 */
764static u32 __get_agg_bandwidth(struct aggregator *aggregator)
765{
766 u32 bandwidth=0;
767 u32 basic_speed;
768
769 if (aggregator->num_of_ports) {
770 basic_speed = __get_link_speed(aggregator->lag_ports);
771 switch (basic_speed) {
772 case AD_LINK_SPEED_BITMASK_1MBPS:
773 bandwidth = aggregator->num_of_ports;
774 break;
775 case AD_LINK_SPEED_BITMASK_10MBPS:
776 bandwidth = aggregator->num_of_ports * 10;
777 break;
778 case AD_LINK_SPEED_BITMASK_100MBPS:
779 bandwidth = aggregator->num_of_ports * 100;
780 break;
781 case AD_LINK_SPEED_BITMASK_1000MBPS:
782 bandwidth = aggregator->num_of_ports * 1000;
783 break;
Jay Vosburgh94dbffd2006-09-22 21:52:15 -0700784 case AD_LINK_SPEED_BITMASK_10000MBPS:
785 bandwidth = aggregator->num_of_ports * 10000;
786 break;
Linus Torvalds1da177e2005-04-16 15:20:36 -0700787 default:
788 bandwidth=0; // to silent the compilor ....
789 }
790 }
791 return bandwidth;
792}
793
794/**
795 * __get_active_agg - get the current active aggregator
796 * @aggregator: the aggregator we're looking at
797 *
798 */
799static struct aggregator *__get_active_agg(struct aggregator *aggregator)
800{
801 struct aggregator *retval = NULL;
802
803 for (; aggregator; aggregator = __get_next_agg(aggregator)) {
804 if (aggregator->is_active) {
805 retval = aggregator;
806 break;
807 }
808 }
809
810 return retval;
811}
812
813/**
814 * __update_lacpdu_from_port - update a port's lacpdu fields
815 * @port: the port we're looking at
816 *
817 */
818static inline void __update_lacpdu_from_port(struct port *port)
819{
820 struct lacpdu *lacpdu = &port->lacpdu;
821
822 /* update current actual Actor parameters */
823 /* lacpdu->subtype initialized
824 * lacpdu->version_number initialized
825 * lacpdu->tlv_type_actor_info initialized
826 * lacpdu->actor_information_length initialized
827 */
828
829 lacpdu->actor_system_priority = port->actor_system_priority;
830 lacpdu->actor_system = port->actor_system;
831 lacpdu->actor_key = port->actor_oper_port_key;
832 lacpdu->actor_port_priority = port->actor_port_priority;
833 lacpdu->actor_port = port->actor_port_number;
834 lacpdu->actor_state = port->actor_oper_port_state;
835
836 /* lacpdu->reserved_3_1 initialized
837 * lacpdu->tlv_type_partner_info initialized
838 * lacpdu->partner_information_length initialized
839 */
840
841 lacpdu->partner_system_priority = port->partner_oper_system_priority;
842 lacpdu->partner_system = port->partner_oper_system;
843 lacpdu->partner_key = port->partner_oper_key;
844 lacpdu->partner_port_priority = port->partner_oper_port_priority;
845 lacpdu->partner_port = port->partner_oper_port_number;
846 lacpdu->partner_state = port->partner_oper_port_state;
847
848 /* lacpdu->reserved_3_2 initialized
849 * lacpdu->tlv_type_collector_info initialized
850 * lacpdu->collector_information_length initialized
851 * collector_max_delay initialized
852 * reserved_12[12] initialized
853 * tlv_type_terminator initialized
854 * terminator_length initialized
855 * reserved_50[50] initialized
856 */
857
858 /* Convert all non u8 parameters to Big Endian for transmit */
Jay Vosburgh89cc76f2006-09-22 21:55:32 -0700859 __htons_lacpdu(lacpdu);
Linus Torvalds1da177e2005-04-16 15:20:36 -0700860}
861
862//////////////////////////////////////////////////////////////////////////////////////
863// ================= main 802.3ad protocol code ======================================
864//////////////////////////////////////////////////////////////////////////////////////
865
866/**
867 * ad_lacpdu_send - send out a lacpdu packet on a given port
868 * @port: the port we're looking at
869 *
870 * Returns: 0 on success
871 * < 0 on error
872 */
873static int ad_lacpdu_send(struct port *port)
874{
875 struct slave *slave = port->slave;
876 struct sk_buff *skb;
877 struct lacpdu_header *lacpdu_header;
878 int length = sizeof(struct lacpdu_header);
879 struct mac_addr lacpdu_multicast_address = AD_MULTICAST_LACPDU_ADDR;
880
881 skb = dev_alloc_skb(length);
882 if (!skb) {
883 return -ENOMEM;
884 }
885
886 skb->dev = slave->dev;
Arnaldo Carvalho de Melo459a98e2007-03-19 15:30:44 -0700887 skb_reset_mac_header(skb);
Arnaldo Carvalho de Melob0e380b2007-04-10 21:21:55 -0700888 skb->network_header = skb->mac_header + ETH_HLEN;
Linus Torvalds1da177e2005-04-16 15:20:36 -0700889 skb->protocol = PKT_TYPE_LACPDU;
890 skb->priority = TC_PRIO_CONTROL;
891
892 lacpdu_header = (struct lacpdu_header *)skb_put(skb, length);
893
894 lacpdu_header->ad_header.destination_address = lacpdu_multicast_address;
895 /* Note: source addres is set to be the member's PERMANENT address, because we use it
896 to identify loopback lacpdus in receive. */
897 lacpdu_header->ad_header.source_address = *((struct mac_addr *)(slave->perm_hwaddr));
898 lacpdu_header->ad_header.length_type = PKT_TYPE_LACPDU;
899
900 lacpdu_header->lacpdu = port->lacpdu; // struct copy
901
902 dev_queue_xmit(skb);
903
904 return 0;
905}
906
907/**
908 * ad_marker_send - send marker information/response on a given port
909 * @port: the port we're looking at
910 * @marker: marker data to send
911 *
912 * Returns: 0 on success
913 * < 0 on error
914 */
915static int ad_marker_send(struct port *port, struct marker *marker)
916{
917 struct slave *slave = port->slave;
918 struct sk_buff *skb;
919 struct marker_header *marker_header;
920 int length = sizeof(struct marker_header);
921 struct mac_addr lacpdu_multicast_address = AD_MULTICAST_LACPDU_ADDR;
922
923 skb = dev_alloc_skb(length + 16);
924 if (!skb) {
925 return -ENOMEM;
926 }
927
928 skb_reserve(skb, 16);
929
930 skb->dev = slave->dev;
Arnaldo Carvalho de Melo459a98e2007-03-19 15:30:44 -0700931 skb_reset_mac_header(skb);
Arnaldo Carvalho de Melob0e380b2007-04-10 21:21:55 -0700932 skb->network_header = skb->mac_header + ETH_HLEN;
Linus Torvalds1da177e2005-04-16 15:20:36 -0700933 skb->protocol = PKT_TYPE_LACPDU;
934
935 marker_header = (struct marker_header *)skb_put(skb, length);
936
937 marker_header->ad_header.destination_address = lacpdu_multicast_address;
938 /* Note: source addres is set to be the member's PERMANENT address, because we use it
939 to identify loopback MARKERs in receive. */
940 marker_header->ad_header.source_address = *((struct mac_addr *)(slave->perm_hwaddr));
941 marker_header->ad_header.length_type = PKT_TYPE_LACPDU;
942
943 marker_header->marker = *marker; // struct copy
944
945 dev_queue_xmit(skb);
946
947 return 0;
948}
949
950/**
951 * ad_mux_machine - handle a port's mux state machine
952 * @port: the port we're looking at
953 *
954 */
955static void ad_mux_machine(struct port *port)
956{
957 mux_states_t last_state;
958
959 // keep current State Machine state to compare later if it was changed
960 last_state = port->sm_mux_state;
961
962 if (port->sm_vars & AD_PORT_BEGIN) {
963 port->sm_mux_state = AD_MUX_DETACHED; // next state
964 } else {
965 switch (port->sm_mux_state) {
966 case AD_MUX_DETACHED:
967 if ((port->sm_vars & AD_PORT_SELECTED) || (port->sm_vars & AD_PORT_STANDBY)) { // if SELECTED or STANDBY
968 port->sm_mux_state = AD_MUX_WAITING; // next state
969 }
970 break;
971 case AD_MUX_WAITING:
972 // if SELECTED == FALSE return to DETACH state
973 if (!(port->sm_vars & AD_PORT_SELECTED)) { // if UNSELECTED
974 port->sm_vars &= ~AD_PORT_READY_N;
975 // in order to withhold the Selection Logic to check all ports READY_N value
976 // every callback cycle to update ready variable, we check READY_N and update READY here
977 __set_agg_ports_ready(port->aggregator, __agg_ports_are_ready(port->aggregator));
978 port->sm_mux_state = AD_MUX_DETACHED; // next state
979 break;
980 }
981
982 // check if the wait_while_timer expired
983 if (port->sm_mux_timer_counter && !(--port->sm_mux_timer_counter)) {
984 port->sm_vars |= AD_PORT_READY_N;
985 }
986
987 // in order to withhold the selection logic to check all ports READY_N value
988 // every callback cycle to update ready variable, we check READY_N and update READY here
989 __set_agg_ports_ready(port->aggregator, __agg_ports_are_ready(port->aggregator));
990
991 // if the wait_while_timer expired, and the port is in READY state, move to ATTACHED state
992 if ((port->sm_vars & AD_PORT_READY) && !port->sm_mux_timer_counter) {
993 port->sm_mux_state = AD_MUX_ATTACHED; // next state
994 }
995 break;
996 case AD_MUX_ATTACHED:
997 // check also if agg_select_timer expired(so the edable port will take place only after this timer)
998 if ((port->sm_vars & AD_PORT_SELECTED) && (port->partner_oper_port_state & AD_STATE_SYNCHRONIZATION) && !__check_agg_selection_timer(port)) {
999 port->sm_mux_state = AD_MUX_COLLECTING_DISTRIBUTING;// next state
1000 } else if (!(port->sm_vars & AD_PORT_SELECTED) || (port->sm_vars & AD_PORT_STANDBY)) { // if UNSELECTED or STANDBY
1001 port->sm_vars &= ~AD_PORT_READY_N;
1002 // in order to withhold the selection logic to check all ports READY_N value
1003 // every callback cycle to update ready variable, we check READY_N and update READY here
1004 __set_agg_ports_ready(port->aggregator, __agg_ports_are_ready(port->aggregator));
1005 port->sm_mux_state = AD_MUX_DETACHED;// next state
1006 }
1007 break;
1008 case AD_MUX_COLLECTING_DISTRIBUTING:
1009 if (!(port->sm_vars & AD_PORT_SELECTED) || (port->sm_vars & AD_PORT_STANDBY) ||
1010 !(port->partner_oper_port_state & AD_STATE_SYNCHRONIZATION)
1011 ) {
1012 port->sm_mux_state = AD_MUX_ATTACHED;// next state
1013
1014 } else {
1015 // if port state hasn't changed make
1016 // sure that a collecting distributing
1017 // port in an active aggregator is enabled
1018 if (port->aggregator &&
1019 port->aggregator->is_active &&
1020 !__port_is_enabled(port)) {
1021
1022 __enable_port(port);
1023 }
1024 }
1025 break;
1026 default: //to silence the compiler
1027 break;
1028 }
1029 }
1030
1031 // check if the state machine was changed
1032 if (port->sm_mux_state != last_state) {
1033 dprintk("Mux Machine: Port=%d, Last State=%d, Curr State=%d\n", port->actor_port_number, last_state, port->sm_mux_state);
1034 switch (port->sm_mux_state) {
1035 case AD_MUX_DETACHED:
1036 __detach_bond_from_agg(port);
1037 port->actor_oper_port_state &= ~AD_STATE_SYNCHRONIZATION;
1038 ad_disable_collecting_distributing(port);
1039 port->actor_oper_port_state &= ~AD_STATE_COLLECTING;
1040 port->actor_oper_port_state &= ~AD_STATE_DISTRIBUTING;
1041 port->ntt = 1;
1042 break;
1043 case AD_MUX_WAITING:
1044 port->sm_mux_timer_counter = __ad_timer_to_ticks(AD_WAIT_WHILE_TIMER, 0);
1045 break;
1046 case AD_MUX_ATTACHED:
1047 __attach_bond_to_agg(port);
1048 port->actor_oper_port_state |= AD_STATE_SYNCHRONIZATION;
1049 port->actor_oper_port_state &= ~AD_STATE_COLLECTING;
1050 port->actor_oper_port_state &= ~AD_STATE_DISTRIBUTING;
1051 ad_disable_collecting_distributing(port);
1052 port->ntt = 1;
1053 break;
1054 case AD_MUX_COLLECTING_DISTRIBUTING:
1055 port->actor_oper_port_state |= AD_STATE_COLLECTING;
1056 port->actor_oper_port_state |= AD_STATE_DISTRIBUTING;
1057 ad_enable_collecting_distributing(port);
1058 port->ntt = 1;
1059 break;
1060 default: //to silence the compiler
1061 break;
1062 }
1063 }
1064}
1065
1066/**
1067 * ad_rx_machine - handle a port's rx State Machine
1068 * @lacpdu: the lacpdu we've received
1069 * @port: the port we're looking at
1070 *
1071 * If lacpdu arrived, stop previous timer (if exists) and set the next state as
1072 * CURRENT. If timer expired set the state machine in the proper state.
1073 * In other cases, this function checks if we need to switch to other state.
1074 */
1075static void ad_rx_machine(struct lacpdu *lacpdu, struct port *port)
1076{
1077 rx_states_t last_state;
1078
1079 // Lock to prevent 2 instances of this function to run simultaneously(rx interrupt and periodic machine callback)
1080 __get_rx_machine_lock(port);
1081
1082 // keep current State Machine state to compare later if it was changed
1083 last_state = port->sm_rx_state;
1084
1085 // check if state machine should change state
1086 // first, check if port was reinitialized
1087 if (port->sm_vars & AD_PORT_BEGIN) {
1088 port->sm_rx_state = AD_RX_INITIALIZE; // next state
1089 }
1090 // check if port is not enabled
1091 else if (!(port->sm_vars & AD_PORT_BEGIN) && !port->is_enabled && !(port->sm_vars & AD_PORT_MOVED)) {
1092 port->sm_rx_state = AD_RX_PORT_DISABLED; // next state
1093 }
1094 // check if new lacpdu arrived
1095 else if (lacpdu && ((port->sm_rx_state == AD_RX_EXPIRED) || (port->sm_rx_state == AD_RX_DEFAULTED) || (port->sm_rx_state == AD_RX_CURRENT))) {
1096 port->sm_rx_timer_counter = 0; // zero timer
1097 port->sm_rx_state = AD_RX_CURRENT;
1098 } else {
1099 // if timer is on, and if it is expired
1100 if (port->sm_rx_timer_counter && !(--port->sm_rx_timer_counter)) {
1101 switch (port->sm_rx_state) {
1102 case AD_RX_EXPIRED:
1103 port->sm_rx_state = AD_RX_DEFAULTED; // next state
1104 break;
1105 case AD_RX_CURRENT:
1106 port->sm_rx_state = AD_RX_EXPIRED; // next state
1107 break;
1108 default: //to silence the compiler
1109 break;
1110 }
1111 } else {
1112 // if no lacpdu arrived and no timer is on
1113 switch (port->sm_rx_state) {
1114 case AD_RX_PORT_DISABLED:
1115 if (port->sm_vars & AD_PORT_MOVED) {
1116 port->sm_rx_state = AD_RX_INITIALIZE; // next state
1117 } else if (port->is_enabled && (port->sm_vars & AD_PORT_LACP_ENABLED)) {
1118 port->sm_rx_state = AD_RX_EXPIRED; // next state
1119 } else if (port->is_enabled && ((port->sm_vars & AD_PORT_LACP_ENABLED) == 0)) {
1120 port->sm_rx_state = AD_RX_LACP_DISABLED; // next state
1121 }
1122 break;
1123 default: //to silence the compiler
1124 break;
1125
1126 }
1127 }
1128 }
1129
1130 // check if the State machine was changed or new lacpdu arrived
1131 if ((port->sm_rx_state != last_state) || (lacpdu)) {
1132 dprintk("Rx Machine: Port=%d, Last State=%d, Curr State=%d\n", port->actor_port_number, last_state, port->sm_rx_state);
1133 switch (port->sm_rx_state) {
1134 case AD_RX_INITIALIZE:
1135 if (!(port->actor_oper_port_key & AD_DUPLEX_KEY_BITS)) {
1136 port->sm_vars &= ~AD_PORT_LACP_ENABLED;
1137 } else {
1138 port->sm_vars |= AD_PORT_LACP_ENABLED;
1139 }
1140 port->sm_vars &= ~AD_PORT_SELECTED;
1141 __record_default(port);
1142 port->actor_oper_port_state &= ~AD_STATE_EXPIRED;
1143 port->sm_vars &= ~AD_PORT_MOVED;
1144 port->sm_rx_state = AD_RX_PORT_DISABLED; // next state
1145
1146 /*- Fall Through -*/
1147
1148 case AD_RX_PORT_DISABLED:
1149 port->sm_vars &= ~AD_PORT_MATCHED;
1150 break;
1151 case AD_RX_LACP_DISABLED:
1152 port->sm_vars &= ~AD_PORT_SELECTED;
1153 __record_default(port);
1154 port->partner_oper_port_state &= ~AD_STATE_AGGREGATION;
1155 port->sm_vars |= AD_PORT_MATCHED;
1156 port->actor_oper_port_state &= ~AD_STATE_EXPIRED;
1157 break;
1158 case AD_RX_EXPIRED:
1159 //Reset of the Synchronization flag. (Standard 43.4.12)
1160 //This reset cause to disable this port in the COLLECTING_DISTRIBUTING state of the
1161 //mux machine in case of EXPIRED even if LINK_DOWN didn't arrive for the port.
1162 port->partner_oper_port_state &= ~AD_STATE_SYNCHRONIZATION;
1163 port->sm_vars &= ~AD_PORT_MATCHED;
1164 port->partner_oper_port_state |= AD_SHORT_TIMEOUT;
1165 port->sm_rx_timer_counter = __ad_timer_to_ticks(AD_CURRENT_WHILE_TIMER, (u16)(AD_SHORT_TIMEOUT));
1166 port->actor_oper_port_state |= AD_STATE_EXPIRED;
1167 break;
1168 case AD_RX_DEFAULTED:
1169 __update_default_selected(port);
1170 __record_default(port);
1171 port->sm_vars |= AD_PORT_MATCHED;
1172 port->actor_oper_port_state &= ~AD_STATE_EXPIRED;
1173 break;
1174 case AD_RX_CURRENT:
1175 // detect loopback situation
1176 if (!MAC_ADDRESS_COMPARE(&(lacpdu->actor_system), &(port->actor_system))) {
1177 // INFO_RECEIVED_LOOPBACK_FRAMES
Mitch Williams4e0952c2005-11-09 10:34:57 -08001178 printk(KERN_ERR DRV_NAME ": %s: An illegal loopback occurred on "
1179 "adapter (%s). Check the configuration to verify that all "
1180 "Adapters are connected to 802.3ad compliant switch ports\n",
1181 port->slave->dev->master->name, port->slave->dev->name);
Linus Torvalds1da177e2005-04-16 15:20:36 -07001182 __release_rx_machine_lock(port);
1183 return;
1184 }
1185 __update_selected(lacpdu, port);
1186 __update_ntt(lacpdu, port);
1187 __record_pdu(lacpdu, port);
1188 __choose_matched(lacpdu, port);
1189 port->sm_rx_timer_counter = __ad_timer_to_ticks(AD_CURRENT_WHILE_TIMER, (u16)(port->actor_oper_port_state & AD_STATE_LACP_TIMEOUT));
1190 port->actor_oper_port_state &= ~AD_STATE_EXPIRED;
1191 // verify that if the aggregator is enabled, the port is enabled too.
1192 //(because if the link goes down for a short time, the 802.3ad will not
1193 // catch it, and the port will continue to be disabled)
1194 if (port->aggregator && port->aggregator->is_active && !__port_is_enabled(port)) {
1195 __enable_port(port);
1196 }
1197 break;
1198 default: //to silence the compiler
1199 break;
1200 }
1201 }
1202 __release_rx_machine_lock(port);
1203}
1204
1205/**
1206 * ad_tx_machine - handle a port's tx state machine
1207 * @port: the port we're looking at
1208 *
1209 */
1210static void ad_tx_machine(struct port *port)
1211{
1212 // check if tx timer expired, to verify that we do not send more than 3 packets per second
1213 if (port->sm_tx_timer_counter && !(--port->sm_tx_timer_counter)) {
1214 // check if there is something to send
1215 if (port->ntt && (port->sm_vars & AD_PORT_LACP_ENABLED)) {
1216 __update_lacpdu_from_port(port);
1217 // send the lacpdu
1218 if (ad_lacpdu_send(port) >= 0) {
1219 dprintk("Sent LACPDU on port %d\n", port->actor_port_number);
1220 // mark ntt as false, so it will not be sent again until demanded
1221 port->ntt = 0;
1222 }
1223 }
1224 // restart tx timer(to verify that we will not exceed AD_MAX_TX_IN_SECOND
1225 port->sm_tx_timer_counter=ad_ticks_per_sec/AD_MAX_TX_IN_SECOND;
1226 }
1227}
1228
1229/**
1230 * ad_periodic_machine - handle a port's periodic state machine
1231 * @port: the port we're looking at
1232 *
1233 * Turn ntt flag on priodically to perform periodic transmission of lacpdu's.
1234 */
1235static void ad_periodic_machine(struct port *port)
1236{
1237 periodic_states_t last_state;
1238
1239 // keep current state machine state to compare later if it was changed
1240 last_state = port->sm_periodic_state;
1241
1242 // check if port was reinitialized
1243 if (((port->sm_vars & AD_PORT_BEGIN) || !(port->sm_vars & AD_PORT_LACP_ENABLED) || !port->is_enabled) ||
1244 (!(port->actor_oper_port_state & AD_STATE_LACP_ACTIVITY) && !(port->partner_oper_port_state & AD_STATE_LACP_ACTIVITY))
1245 ) {
1246 port->sm_periodic_state = AD_NO_PERIODIC; // next state
1247 }
1248 // check if state machine should change state
1249 else if (port->sm_periodic_timer_counter) {
1250 // check if periodic state machine expired
1251 if (!(--port->sm_periodic_timer_counter)) {
1252 // if expired then do tx
1253 port->sm_periodic_state = AD_PERIODIC_TX; // next state
1254 } else {
1255 // If not expired, check if there is some new timeout parameter from the partner state
1256 switch (port->sm_periodic_state) {
1257 case AD_FAST_PERIODIC:
1258 if (!(port->partner_oper_port_state & AD_STATE_LACP_TIMEOUT)) {
1259 port->sm_periodic_state = AD_SLOW_PERIODIC; // next state
1260 }
1261 break;
1262 case AD_SLOW_PERIODIC:
1263 if ((port->partner_oper_port_state & AD_STATE_LACP_TIMEOUT)) {
1264 // stop current timer
1265 port->sm_periodic_timer_counter = 0;
1266 port->sm_periodic_state = AD_PERIODIC_TX; // next state
1267 }
1268 break;
1269 default: //to silence the compiler
1270 break;
1271 }
1272 }
1273 } else {
1274 switch (port->sm_periodic_state) {
1275 case AD_NO_PERIODIC:
1276 port->sm_periodic_state = AD_FAST_PERIODIC; // next state
1277 break;
1278 case AD_PERIODIC_TX:
1279 if (!(port->partner_oper_port_state & AD_STATE_LACP_TIMEOUT)) {
1280 port->sm_periodic_state = AD_SLOW_PERIODIC; // next state
1281 } else {
1282 port->sm_periodic_state = AD_FAST_PERIODIC; // next state
1283 }
1284 break;
1285 default: //to silence the compiler
1286 break;
1287 }
1288 }
1289
1290 // check if the state machine was changed
1291 if (port->sm_periodic_state != last_state) {
1292 dprintk("Periodic Machine: Port=%d, Last State=%d, Curr State=%d\n", port->actor_port_number, last_state, port->sm_periodic_state);
1293 switch (port->sm_periodic_state) {
1294 case AD_NO_PERIODIC:
1295 port->sm_periodic_timer_counter = 0; // zero timer
1296 break;
1297 case AD_FAST_PERIODIC:
1298 port->sm_periodic_timer_counter = __ad_timer_to_ticks(AD_PERIODIC_TIMER, (u16)(AD_FAST_PERIODIC_TIME))-1; // decrement 1 tick we lost in the PERIODIC_TX cycle
1299 break;
1300 case AD_SLOW_PERIODIC:
1301 port->sm_periodic_timer_counter = __ad_timer_to_ticks(AD_PERIODIC_TIMER, (u16)(AD_SLOW_PERIODIC_TIME))-1; // decrement 1 tick we lost in the PERIODIC_TX cycle
1302 break;
1303 case AD_PERIODIC_TX:
1304 port->ntt = 1;
1305 break;
1306 default: //to silence the compiler
1307 break;
1308 }
1309 }
1310}
1311
1312/**
1313 * ad_port_selection_logic - select aggregation groups
1314 * @port: the port we're looking at
1315 *
1316 * Select aggregation groups, and assign each port for it's aggregetor. The
1317 * selection logic is called in the inititalization (after all the handshkes),
1318 * and after every lacpdu receive (if selected is off).
1319 */
1320static void ad_port_selection_logic(struct port *port)
1321{
1322 struct aggregator *aggregator, *free_aggregator = NULL, *temp_aggregator;
1323 struct port *last_port = NULL, *curr_port;
1324 int found = 0;
1325
1326 // if the port is already Selected, do nothing
1327 if (port->sm_vars & AD_PORT_SELECTED) {
1328 return;
1329 }
1330
1331 // if the port is connected to other aggregator, detach it
1332 if (port->aggregator) {
1333 // detach the port from its former aggregator
1334 temp_aggregator=port->aggregator;
1335 for (curr_port=temp_aggregator->lag_ports; curr_port; last_port=curr_port, curr_port=curr_port->next_port_in_aggregator) {
1336 if (curr_port == port) {
1337 temp_aggregator->num_of_ports--;
1338 if (!last_port) {// if it is the first port attached to the aggregator
1339 temp_aggregator->lag_ports=port->next_port_in_aggregator;
1340 } else {// not the first port attached to the aggregator
1341 last_port->next_port_in_aggregator=port->next_port_in_aggregator;
1342 }
1343
1344 // clear the port's relations to this aggregator
1345 port->aggregator = NULL;
1346 port->next_port_in_aggregator=NULL;
1347 port->actor_port_aggregator_identifier=0;
1348
1349 dprintk("Port %d left LAG %d\n", port->actor_port_number, temp_aggregator->aggregator_identifier);
1350 // if the aggregator is empty, clear its parameters, and set it ready to be attached
1351 if (!temp_aggregator->lag_ports) {
1352 ad_clear_agg(temp_aggregator);
1353 }
1354 break;
1355 }
1356 }
1357 if (!curr_port) { // meaning: the port was related to an aggregator but was not on the aggregator port list
Mitch Williams4e0952c2005-11-09 10:34:57 -08001358 printk(KERN_WARNING DRV_NAME ": %s: Warning: Port %d (on %s) was "
Linus Torvalds1da177e2005-04-16 15:20:36 -07001359 "related to aggregator %d but was not on its port list\n",
Mitch Williams4e0952c2005-11-09 10:34:57 -08001360 port->slave->dev->master->name,
Linus Torvalds1da177e2005-04-16 15:20:36 -07001361 port->actor_port_number, port->slave->dev->name,
1362 port->aggregator->aggregator_identifier);
1363 }
1364 }
1365 // search on all aggregators for a suitable aggregator for this port
1366 for (aggregator = __get_first_agg(port); aggregator;
1367 aggregator = __get_next_agg(aggregator)) {
1368
1369 // keep a free aggregator for later use(if needed)
1370 if (!aggregator->lag_ports) {
1371 if (!free_aggregator) {
1372 free_aggregator=aggregator;
1373 }
1374 continue;
1375 }
1376 // check if current aggregator suits us
1377 if (((aggregator->actor_oper_aggregator_key == port->actor_oper_port_key) && // if all parameters match AND
1378 !MAC_ADDRESS_COMPARE(&(aggregator->partner_system), &(port->partner_oper_system)) &&
1379 (aggregator->partner_system_priority == port->partner_oper_system_priority) &&
1380 (aggregator->partner_oper_aggregator_key == port->partner_oper_key)
1381 ) &&
1382 ((MAC_ADDRESS_COMPARE(&(port->partner_oper_system), &(null_mac_addr)) && // partner answers
1383 !aggregator->is_individual) // but is not individual OR
1384 )
1385 ) {
1386 // attach to the founded aggregator
1387 port->aggregator = aggregator;
1388 port->actor_port_aggregator_identifier=port->aggregator->aggregator_identifier;
1389 port->next_port_in_aggregator=aggregator->lag_ports;
1390 port->aggregator->num_of_ports++;
1391 aggregator->lag_ports=port;
1392 dprintk("Port %d joined LAG %d(existing LAG)\n", port->actor_port_number, port->aggregator->aggregator_identifier);
1393
1394 // mark this port as selected
1395 port->sm_vars |= AD_PORT_SELECTED;
1396 found = 1;
1397 break;
1398 }
1399 }
1400
1401 // the port couldn't find an aggregator - attach it to a new aggregator
1402 if (!found) {
1403 if (free_aggregator) {
1404 // assign port a new aggregator
1405 port->aggregator = free_aggregator;
1406 port->actor_port_aggregator_identifier=port->aggregator->aggregator_identifier;
1407
1408 // update the new aggregator's parameters
1409 // if port was responsed from the end-user
1410 if (port->actor_oper_port_key & AD_DUPLEX_KEY_BITS) {// if port is full duplex
1411 port->aggregator->is_individual = 0;
1412 } else {
1413 port->aggregator->is_individual = 1;
1414 }
1415
1416 port->aggregator->actor_admin_aggregator_key = port->actor_admin_port_key;
1417 port->aggregator->actor_oper_aggregator_key = port->actor_oper_port_key;
1418 port->aggregator->partner_system=port->partner_oper_system;
1419 port->aggregator->partner_system_priority = port->partner_oper_system_priority;
1420 port->aggregator->partner_oper_aggregator_key = port->partner_oper_key;
1421 port->aggregator->receive_state = 1;
1422 port->aggregator->transmit_state = 1;
1423 port->aggregator->lag_ports = port;
1424 port->aggregator->num_of_ports++;
1425
1426 // mark this port as selected
1427 port->sm_vars |= AD_PORT_SELECTED;
1428
1429 dprintk("Port %d joined LAG %d(new LAG)\n", port->actor_port_number, port->aggregator->aggregator_identifier);
1430 } else {
Mitch Williams4e0952c2005-11-09 10:34:57 -08001431 printk(KERN_ERR DRV_NAME ": %s: Port %d (on %s) did not find a suitable aggregator\n",
1432 port->slave->dev->master->name,
Linus Torvalds1da177e2005-04-16 15:20:36 -07001433 port->actor_port_number, port->slave->dev->name);
1434 }
1435 }
1436 // if all aggregator's ports are READY_N == TRUE, set ready=TRUE in all aggregator's ports
1437 // else set ready=FALSE in all aggregator's ports
1438 __set_agg_ports_ready(port->aggregator, __agg_ports_are_ready(port->aggregator));
1439
1440 if (!__check_agg_selection_timer(port) && (aggregator = __get_first_agg(port))) {
1441 ad_agg_selection_logic(aggregator);
1442 }
1443}
1444
1445/**
1446 * ad_agg_selection_logic - select an aggregation group for a team
1447 * @aggregator: the aggregator we're looking at
1448 *
1449 * It is assumed that only one aggregator may be selected for a team.
1450 * The logic of this function is to select (at first time) the aggregator with
1451 * the most ports attached to it, and to reselect the active aggregator only if
1452 * the previous aggregator has no more ports related to it.
1453 *
1454 * FIXME: this function MUST be called with the first agg in the bond, or
1455 * __get_active_agg() won't work correctly. This function should be better
1456 * called with the bond itself, and retrieve the first agg from it.
1457 */
1458static void ad_agg_selection_logic(struct aggregator *aggregator)
1459{
1460 struct aggregator *best_aggregator = NULL, *active_aggregator = NULL;
1461 struct aggregator *last_active_aggregator = NULL, *origin_aggregator;
1462 struct port *port;
1463 u16 num_of_aggs=0;
1464
1465 origin_aggregator = aggregator;
1466
1467 //get current active aggregator
1468 last_active_aggregator = __get_active_agg(aggregator);
1469
1470 // search for the aggregator with the most ports attached to it.
1471 do {
1472 // count how many candidate lag's we have
1473 if (aggregator->lag_ports) {
1474 num_of_aggs++;
1475 }
1476 if (aggregator->is_active && !aggregator->is_individual && // if current aggregator is the active aggregator
1477 MAC_ADDRESS_COMPARE(&(aggregator->partner_system), &(null_mac_addr))) { // and partner answers to 802.3ad PDUs
1478 if (aggregator->num_of_ports) { // if any ports attached to the current aggregator
1479 best_aggregator=NULL; // disregard the best aggregator that was chosen by now
1480 break; // stop the selection of other aggregator if there are any ports attached to this active aggregator
1481 } else { // no ports attached to this active aggregator
1482 aggregator->is_active = 0; // mark this aggregator as not active anymore
1483 }
1484 }
1485 if (aggregator->num_of_ports) { // if any ports attached
1486 if (best_aggregator) { // if there is a candidte aggregator
1487 //The reasons for choosing new best aggregator:
1488 // 1. if current agg is NOT individual and the best agg chosen so far is individual OR
1489 // current and best aggs are both individual or both not individual, AND
1490 // 2a. current agg partner reply but best agg partner do not reply OR
1491 // 2b. current agg partner reply OR current agg partner do not reply AND best agg partner also do not reply AND
1492 // current has more ports/bandwidth, or same amount of ports but current has faster ports, THEN
1493 // current agg become best agg so far
1494
1495 //if current agg is NOT individual and the best agg chosen so far is individual change best_aggregator
1496 if (!aggregator->is_individual && best_aggregator->is_individual) {
1497 best_aggregator=aggregator;
1498 }
1499 // current and best aggs are both individual or both not individual
1500 else if ((aggregator->is_individual && best_aggregator->is_individual) ||
1501 (!aggregator->is_individual && !best_aggregator->is_individual)) {
1502 // current and best aggs are both individual or both not individual AND
1503 // current agg partner reply but best agg partner do not reply
1504 if ((MAC_ADDRESS_COMPARE(&(aggregator->partner_system), &(null_mac_addr)) &&
1505 !MAC_ADDRESS_COMPARE(&(best_aggregator->partner_system), &(null_mac_addr)))) {
1506 best_aggregator=aggregator;
1507 }
1508 // current agg partner reply OR current agg partner do not reply AND best agg partner also do not reply
1509 else if (! (!MAC_ADDRESS_COMPARE(&(aggregator->partner_system), &(null_mac_addr)) &&
1510 MAC_ADDRESS_COMPARE(&(best_aggregator->partner_system), &(null_mac_addr)))) {
1511 if ((__get_agg_selection_mode(aggregator->lag_ports) == AD_BANDWIDTH)&&
1512 (__get_agg_bandwidth(aggregator) > __get_agg_bandwidth(best_aggregator))) {
1513 best_aggregator=aggregator;
1514 } else if (__get_agg_selection_mode(aggregator->lag_ports) == AD_COUNT) {
1515 if (((aggregator->num_of_ports > best_aggregator->num_of_ports) &&
1516 (aggregator->actor_oper_aggregator_key & AD_SPEED_KEY_BITS))||
1517 ((aggregator->num_of_ports == best_aggregator->num_of_ports) &&
1518 ((u16)(aggregator->actor_oper_aggregator_key & AD_SPEED_KEY_BITS) >
1519 (u16)(best_aggregator->actor_oper_aggregator_key & AD_SPEED_KEY_BITS)))) {
1520 best_aggregator=aggregator;
1521 }
1522 }
1523 }
1524 }
1525 } else {
1526 best_aggregator=aggregator;
1527 }
1528 }
1529 aggregator->is_active = 0; // mark all aggregators as not active anymore
1530 } while ((aggregator = __get_next_agg(aggregator)));
1531
1532 // if we have new aggregator selected, don't replace the old aggregator if it has an answering partner,
1533 // or if both old aggregator and new aggregator don't have answering partner
1534 if (best_aggregator) {
1535 if (last_active_aggregator && last_active_aggregator->lag_ports && last_active_aggregator->lag_ports->is_enabled &&
1536 (MAC_ADDRESS_COMPARE(&(last_active_aggregator->partner_system), &(null_mac_addr)) || // partner answers OR
1537 (!MAC_ADDRESS_COMPARE(&(last_active_aggregator->partner_system), &(null_mac_addr)) && // both old and new
1538 !MAC_ADDRESS_COMPARE(&(best_aggregator->partner_system), &(null_mac_addr)))) // partner do not answer
1539 ) {
1540 // if new aggregator has link, and old aggregator does not, replace old aggregator.(do nothing)
1541 // -> don't replace otherwise.
1542 if (!(!last_active_aggregator->actor_oper_aggregator_key && best_aggregator->actor_oper_aggregator_key)) {
1543 best_aggregator=NULL;
1544 last_active_aggregator->is_active = 1; // don't replace good old aggregator
1545
1546 }
1547 }
1548 }
1549
1550 // if there is new best aggregator, activate it
1551 if (best_aggregator) {
1552 for (aggregator = __get_first_agg(best_aggregator->lag_ports);
1553 aggregator;
1554 aggregator = __get_next_agg(aggregator)) {
1555
1556 dprintk("Agg=%d; Ports=%d; a key=%d; p key=%d; Indiv=%d; Active=%d\n",
1557 aggregator->aggregator_identifier, aggregator->num_of_ports,
1558 aggregator->actor_oper_aggregator_key, aggregator->partner_oper_aggregator_key,
1559 aggregator->is_individual, aggregator->is_active);
1560 }
1561
1562 // check if any partner replys
1563 if (best_aggregator->is_individual) {
Mitch Williams4e0952c2005-11-09 10:34:57 -08001564 printk(KERN_WARNING DRV_NAME ": %s: Warning: No 802.3ad response from "
1565 "the link partner for any adapters in the bond\n",
1566 best_aggregator->slave->dev->master->name);
Linus Torvalds1da177e2005-04-16 15:20:36 -07001567 }
1568
1569 // check if there are more than one aggregator
1570 if (num_of_aggs > 1) {
1571 dprintk("Warning: More than one Link Aggregation Group was "
1572 "found in the bond. Only one group will function in the bond\n");
1573 }
1574
1575 best_aggregator->is_active = 1;
1576 dprintk("LAG %d choosed as the active LAG\n", best_aggregator->aggregator_identifier);
1577 dprintk("Agg=%d; Ports=%d; a key=%d; p key=%d; Indiv=%d; Active=%d\n",
1578 best_aggregator->aggregator_identifier, best_aggregator->num_of_ports,
1579 best_aggregator->actor_oper_aggregator_key, best_aggregator->partner_oper_aggregator_key,
1580 best_aggregator->is_individual, best_aggregator->is_active);
1581
1582 // disable the ports that were related to the former active_aggregator
1583 if (last_active_aggregator) {
1584 for (port=last_active_aggregator->lag_ports; port; port=port->next_port_in_aggregator) {
1585 __disable_port(port);
1586 }
1587 }
1588 }
1589
1590 // if the selected aggregator is of join individuals(partner_system is NULL), enable their ports
1591 active_aggregator = __get_active_agg(origin_aggregator);
1592
1593 if (active_aggregator) {
1594 if (!MAC_ADDRESS_COMPARE(&(active_aggregator->partner_system), &(null_mac_addr))) {
1595 for (port=active_aggregator->lag_ports; port; port=port->next_port_in_aggregator) {
1596 __enable_port(port);
1597 }
1598 }
1599 }
1600}
1601
1602/**
1603 * ad_clear_agg - clear a given aggregator's parameters
1604 * @aggregator: the aggregator we're looking at
1605 *
1606 */
1607static void ad_clear_agg(struct aggregator *aggregator)
1608{
1609 if (aggregator) {
1610 aggregator->is_individual = 0;
1611 aggregator->actor_admin_aggregator_key = 0;
1612 aggregator->actor_oper_aggregator_key = 0;
1613 aggregator->partner_system = null_mac_addr;
1614 aggregator->partner_system_priority = 0;
1615 aggregator->partner_oper_aggregator_key = 0;
1616 aggregator->receive_state = 0;
1617 aggregator->transmit_state = 0;
1618 aggregator->lag_ports = NULL;
1619 aggregator->is_active = 0;
1620 aggregator->num_of_ports = 0;
1621 dprintk("LAG %d was cleared\n", aggregator->aggregator_identifier);
1622 }
1623}
1624
1625/**
1626 * ad_initialize_agg - initialize a given aggregator's parameters
1627 * @aggregator: the aggregator we're looking at
1628 *
1629 */
1630static void ad_initialize_agg(struct aggregator *aggregator)
1631{
1632 if (aggregator) {
1633 ad_clear_agg(aggregator);
1634
1635 aggregator->aggregator_mac_address = null_mac_addr;
1636 aggregator->aggregator_identifier = 0;
1637 aggregator->slave = NULL;
1638 }
1639}
1640
1641/**
1642 * ad_initialize_port - initialize a given port's parameters
1643 * @aggregator: the aggregator we're looking at
1644 * @lacp_fast: boolean. whether fast periodic should be used
1645 *
1646 */
1647static void ad_initialize_port(struct port *port, int lacp_fast)
1648{
1649 if (port) {
1650 port->actor_port_number = 1;
1651 port->actor_port_priority = 0xff;
1652 port->actor_system = null_mac_addr;
1653 port->actor_system_priority = 0xffff;
1654 port->actor_port_aggregator_identifier = 0;
1655 port->ntt = 0;
1656 port->actor_admin_port_key = 1;
1657 port->actor_oper_port_key = 1;
1658 port->actor_admin_port_state = AD_STATE_AGGREGATION | AD_STATE_LACP_ACTIVITY;
1659 port->actor_oper_port_state = AD_STATE_AGGREGATION | AD_STATE_LACP_ACTIVITY;
1660
1661 if (lacp_fast) {
1662 port->actor_oper_port_state |= AD_STATE_LACP_TIMEOUT;
1663 }
1664
1665 port->partner_admin_system = null_mac_addr;
1666 port->partner_oper_system = null_mac_addr;
1667 port->partner_admin_system_priority = 0xffff;
1668 port->partner_oper_system_priority = 0xffff;
1669 port->partner_admin_key = 1;
1670 port->partner_oper_key = 1;
1671 port->partner_admin_port_number = 1;
1672 port->partner_oper_port_number = 1;
1673 port->partner_admin_port_priority = 0xff;
1674 port->partner_oper_port_priority = 0xff;
1675 port->partner_admin_port_state = 1;
1676 port->partner_oper_port_state = 1;
1677 port->is_enabled = 1;
1678 // ****** private parameters ******
1679 port->sm_vars = 0x3;
1680 port->sm_rx_state = 0;
1681 port->sm_rx_timer_counter = 0;
1682 port->sm_periodic_state = 0;
1683 port->sm_periodic_timer_counter = 0;
1684 port->sm_mux_state = 0;
1685 port->sm_mux_timer_counter = 0;
1686 port->sm_tx_state = 0;
1687 port->sm_tx_timer_counter = 0;
1688 port->slave = NULL;
1689 port->aggregator = NULL;
1690 port->next_port_in_aggregator = NULL;
1691 port->transaction_id = 0;
1692
1693 ad_initialize_lacpdu(&(port->lacpdu));
1694 }
1695}
1696
1697/**
1698 * ad_enable_collecting_distributing - enable a port's transmit/receive
1699 * @port: the port we're looking at
1700 *
1701 * Enable @port if it's in an active aggregator
1702 */
1703static void ad_enable_collecting_distributing(struct port *port)
1704{
1705 if (port->aggregator->is_active) {
1706 dprintk("Enabling port %d(LAG %d)\n", port->actor_port_number, port->aggregator->aggregator_identifier);
1707 __enable_port(port);
1708 }
1709}
1710
1711/**
1712 * ad_disable_collecting_distributing - disable a port's transmit/receive
1713 * @port: the port we're looking at
1714 *
1715 */
1716static void ad_disable_collecting_distributing(struct port *port)
1717{
1718 if (port->aggregator && MAC_ADDRESS_COMPARE(&(port->aggregator->partner_system), &(null_mac_addr))) {
1719 dprintk("Disabling port %d(LAG %d)\n", port->actor_port_number, port->aggregator->aggregator_identifier);
1720 __disable_port(port);
1721 }
1722}
1723
1724#if 0
1725/**
1726 * ad_marker_info_send - send a marker information frame
1727 * @port: the port we're looking at
1728 *
1729 * This function does nothing since we decided not to implement send and handle
1730 * response for marker PDU's, in this stage, but only to respond to marker
1731 * information.
1732 */
1733static void ad_marker_info_send(struct port *port)
1734{
1735 struct marker marker;
1736 u16 index;
1737
1738 // fill the marker PDU with the appropriate values
1739 marker.subtype = 0x02;
1740 marker.version_number = 0x01;
1741 marker.tlv_type = AD_MARKER_INFORMATION_SUBTYPE;
1742 marker.marker_length = 0x16;
1743 // convert requester_port to Big Endian
1744 marker.requester_port = (((port->actor_port_number & 0xFF) << 8) |((u16)(port->actor_port_number & 0xFF00) >> 8));
1745 marker.requester_system = port->actor_system;
1746 // convert requester_port(u32) to Big Endian
1747 marker.requester_transaction_id = (((++port->transaction_id & 0xFF) << 24) |((port->transaction_id & 0xFF00) << 8) |((port->transaction_id & 0xFF0000) >> 8) |((port->transaction_id & 0xFF000000) >> 24));
1748 marker.pad = 0;
1749 marker.tlv_type_terminator = 0x00;
1750 marker.terminator_length = 0x00;
1751 for (index=0; index<90; index++) {
1752 marker.reserved_90[index]=0;
1753 }
1754
1755 // send the marker information
1756 if (ad_marker_send(port, &marker) >= 0) {
1757 dprintk("Sent Marker Information on port %d\n", port->actor_port_number);
1758 }
1759}
1760#endif
1761
1762/**
1763 * ad_marker_info_received - handle receive of a Marker information frame
1764 * @marker_info: Marker info received
1765 * @port: the port we're looking at
1766 *
1767 */
1768static void ad_marker_info_received(struct marker *marker_info,struct port *port)
1769{
1770 struct marker marker;
1771
1772 // copy the received marker data to the response marker
1773 //marker = *marker_info;
1774 memcpy(&marker, marker_info, sizeof(struct marker));
1775 // change the marker subtype to marker response
1776 marker.tlv_type=AD_MARKER_RESPONSE_SUBTYPE;
1777 // send the marker response
1778
1779 if (ad_marker_send(port, &marker) >= 0) {
1780 dprintk("Sent Marker Response on port %d\n", port->actor_port_number);
1781 }
1782}
1783
1784/**
1785 * ad_marker_response_received - handle receive of a marker response frame
1786 * @marker: marker PDU received
1787 * @port: the port we're looking at
1788 *
1789 * This function does nothing since we decided not to implement send and handle
1790 * response for marker PDU's, in this stage, but only to respond to marker
1791 * information.
1792 */
1793static void ad_marker_response_received(struct marker *marker, struct port *port)
1794{
1795 marker=NULL; // just to satisfy the compiler
1796 port=NULL; // just to satisfy the compiler
1797 // DO NOTHING, SINCE WE DECIDED NOT TO IMPLEMENT THIS FEATURE FOR NOW
1798}
1799
1800/**
1801 * ad_initialize_lacpdu - initialize a given lacpdu structure
1802 * @lacpdu: lacpdu structure to initialize
1803 *
1804 */
1805static void ad_initialize_lacpdu(struct lacpdu *lacpdu)
1806{
1807 u16 index;
1808
1809 // initialize lacpdu data
1810 lacpdu->subtype = 0x01;
1811 lacpdu->version_number = 0x01;
1812 lacpdu->tlv_type_actor_info = 0x01;
1813 lacpdu->actor_information_length = 0x14;
1814 // lacpdu->actor_system_priority updated on send
1815 // lacpdu->actor_system updated on send
1816 // lacpdu->actor_key updated on send
1817 // lacpdu->actor_port_priority updated on send
1818 // lacpdu->actor_port updated on send
1819 // lacpdu->actor_state updated on send
1820 lacpdu->tlv_type_partner_info = 0x02;
1821 lacpdu->partner_information_length = 0x14;
1822 for (index=0; index<=2; index++) {
1823 lacpdu->reserved_3_1[index]=0;
1824 }
1825 // lacpdu->partner_system_priority updated on send
1826 // lacpdu->partner_system updated on send
1827 // lacpdu->partner_key updated on send
1828 // lacpdu->partner_port_priority updated on send
1829 // lacpdu->partner_port updated on send
1830 // lacpdu->partner_state updated on send
1831 for (index=0; index<=2; index++) {
1832 lacpdu->reserved_3_2[index]=0;
1833 }
1834 lacpdu->tlv_type_collector_info = 0x03;
1835 lacpdu->collector_information_length= 0x10;
1836 lacpdu->collector_max_delay = AD_COLLECTOR_MAX_DELAY;
1837 for (index=0; index<=11; index++) {
1838 lacpdu->reserved_12[index]=0;
1839 }
1840 lacpdu->tlv_type_terminator = 0x00;
1841 lacpdu->terminator_length = 0;
1842 for (index=0; index<=49; index++) {
1843 lacpdu->reserved_50[index]=0;
1844 }
1845}
1846
1847//////////////////////////////////////////////////////////////////////////////////////
1848// ================= AD exported functions to the main bonding code ==================
1849//////////////////////////////////////////////////////////////////////////////////////
1850
1851// Check aggregators status in team every T seconds
1852#define AD_AGGREGATOR_SELECTION_TIMER 8
1853
1854static u16 aggregator_identifier;
1855
1856/**
1857 * bond_3ad_initialize - initialize a bond's 802.3ad parameters and structures
1858 * @bond: bonding struct to work on
1859 * @tick_resolution: tick duration (millisecond resolution)
1860 * @lacp_fast: boolean. whether fast periodic should be used
1861 *
1862 * Can be called only after the mac address of the bond is set.
1863 */
1864void bond_3ad_initialize(struct bonding *bond, u16 tick_resolution, int lacp_fast)
1865{
1866 // check that the bond is not initialized yet
1867 if (MAC_ADDRESS_COMPARE(&(BOND_AD_INFO(bond).system.sys_mac_addr), &(bond->dev->dev_addr))) {
1868
1869 aggregator_identifier = 0;
1870
1871 BOND_AD_INFO(bond).lacp_fast = lacp_fast;
1872 BOND_AD_INFO(bond).system.sys_priority = 0xFFFF;
1873 BOND_AD_INFO(bond).system.sys_mac_addr = *((struct mac_addr *)bond->dev->dev_addr);
1874
1875 // initialize how many times this module is called in one second(should be about every 100ms)
1876 ad_ticks_per_sec = tick_resolution;
1877
1878 // initialize the aggregator selection timer(to activate an aggregation selection after initialize)
1879 BOND_AD_INFO(bond).agg_select_timer = (AD_AGGREGATOR_SELECTION_TIMER * ad_ticks_per_sec);
1880 BOND_AD_INFO(bond).agg_select_mode = AD_BANDWIDTH;
1881 }
1882}
1883
1884/**
1885 * bond_3ad_bind_slave - initialize a slave's port
1886 * @slave: slave struct to work on
1887 *
1888 * Returns: 0 on success
1889 * < 0 on error
1890 */
1891int bond_3ad_bind_slave(struct slave *slave)
1892{
1893 struct bonding *bond = bond_get_bond_by_slave(slave);
1894 struct port *port;
1895 struct aggregator *aggregator;
1896
1897 if (bond == NULL) {
Mitch Williams4e0952c2005-11-09 10:34:57 -08001898 printk(KERN_ERR DRV_NAME ": %s: The slave %s is not attached to its bond\n",
1899 slave->dev->master->name, slave->dev->name);
Linus Torvalds1da177e2005-04-16 15:20:36 -07001900 return -1;
1901 }
1902
1903 //check that the slave has not been intialized yet.
1904 if (SLAVE_AD_INFO(slave).port.slave != slave) {
1905
1906 // port initialization
1907 port = &(SLAVE_AD_INFO(slave).port);
1908
1909 ad_initialize_port(port, BOND_AD_INFO(bond).lacp_fast);
1910
1911 port->slave = slave;
1912 port->actor_port_number = SLAVE_AD_INFO(slave).id;
1913 // key is determined according to the link speed, duplex and user key(which is yet not supported)
1914 // ------------------------------------------------------------
1915 // Port key : | User key | Speed |Duplex|
1916 // ------------------------------------------------------------
1917 // 16 6 1 0
1918 port->actor_admin_port_key = 0; // initialize this parameter
1919 port->actor_admin_port_key |= __get_duplex(port);
1920 port->actor_admin_port_key |= (__get_link_speed(port) << 1);
1921 port->actor_oper_port_key = port->actor_admin_port_key;
1922 // if the port is not full duplex, then the port should be not lacp Enabled
1923 if (!(port->actor_oper_port_key & AD_DUPLEX_KEY_BITS)) {
1924 port->sm_vars &= ~AD_PORT_LACP_ENABLED;
1925 }
1926 // actor system is the bond's system
1927 port->actor_system = BOND_AD_INFO(bond).system.sys_mac_addr;
1928 // tx timer(to verify that no more than MAX_TX_IN_SECOND lacpdu's are sent in one second)
1929 port->sm_tx_timer_counter = ad_ticks_per_sec/AD_MAX_TX_IN_SECOND;
1930 port->aggregator = NULL;
1931 port->next_port_in_aggregator = NULL;
1932
1933 __disable_port(port);
1934 __initialize_port_locks(port);
1935
1936
1937 // aggregator initialization
1938 aggregator = &(SLAVE_AD_INFO(slave).aggregator);
1939
1940 ad_initialize_agg(aggregator);
1941
1942 aggregator->aggregator_mac_address = *((struct mac_addr *)bond->dev->dev_addr);
1943 aggregator->aggregator_identifier = (++aggregator_identifier);
1944 aggregator->slave = slave;
1945 aggregator->is_active = 0;
1946 aggregator->num_of_ports = 0;
1947 }
1948
1949 return 0;
1950}
1951
1952/**
1953 * bond_3ad_unbind_slave - deinitialize a slave's port
1954 * @slave: slave struct to work on
1955 *
1956 * Search for the aggregator that is related to this port, remove the
1957 * aggregator and assign another aggregator for other port related to it
1958 * (if any), and remove the port.
1959 */
1960void bond_3ad_unbind_slave(struct slave *slave)
1961{
1962 struct port *port, *prev_port, *temp_port;
1963 struct aggregator *aggregator, *new_aggregator, *temp_aggregator;
1964 int select_new_active_agg = 0;
1965
1966 // find the aggregator related to this slave
1967 aggregator = &(SLAVE_AD_INFO(slave).aggregator);
1968
1969 // find the port related to this slave
1970 port = &(SLAVE_AD_INFO(slave).port);
1971
1972 // if slave is null, the whole port is not initialized
1973 if (!port->slave) {
Mitch Williams4e0952c2005-11-09 10:34:57 -08001974 printk(KERN_WARNING DRV_NAME ": Warning: %s: Trying to "
1975 "unbind an uninitialized port on %s\n",
1976 slave->dev->master->name, slave->dev->name);
Linus Torvalds1da177e2005-04-16 15:20:36 -07001977 return;
1978 }
1979
1980 dprintk("Unbinding Link Aggregation Group %d\n", aggregator->aggregator_identifier);
1981
1982 /* Tell the partner that this port is not suitable for aggregation */
1983 port->actor_oper_port_state &= ~AD_STATE_AGGREGATION;
1984 __update_lacpdu_from_port(port);
1985 ad_lacpdu_send(port);
1986
1987 // check if this aggregator is occupied
1988 if (aggregator->lag_ports) {
1989 // check if there are other ports related to this aggregator except
1990 // the port related to this slave(thats ensure us that there is a
1991 // reason to search for new aggregator, and that we will find one
1992 if ((aggregator->lag_ports != port) || (aggregator->lag_ports->next_port_in_aggregator)) {
1993 // find new aggregator for the related port(s)
1994 new_aggregator = __get_first_agg(port);
1995 for (; new_aggregator; new_aggregator = __get_next_agg(new_aggregator)) {
1996 // if the new aggregator is empty, or it connected to to our port only
1997 if (!new_aggregator->lag_ports || ((new_aggregator->lag_ports == port) && !new_aggregator->lag_ports->next_port_in_aggregator)) {
1998 break;
1999 }
2000 }
2001 // if new aggregator found, copy the aggregator's parameters
2002 // and connect the related lag_ports to the new aggregator
2003 if ((new_aggregator) && ((!new_aggregator->lag_ports) || ((new_aggregator->lag_ports == port) && !new_aggregator->lag_ports->next_port_in_aggregator))) {
2004 dprintk("Some port(s) related to LAG %d - replaceing with LAG %d\n", aggregator->aggregator_identifier, new_aggregator->aggregator_identifier);
2005
2006 if ((new_aggregator->lag_ports == port) && new_aggregator->is_active) {
Mitch Williams4e0952c2005-11-09 10:34:57 -08002007 printk(KERN_INFO DRV_NAME ": %s: Removing an active aggregator\n",
2008 aggregator->slave->dev->master->name);
Linus Torvalds1da177e2005-04-16 15:20:36 -07002009 // select new active aggregator
2010 select_new_active_agg = 1;
2011 }
2012
2013 new_aggregator->is_individual = aggregator->is_individual;
2014 new_aggregator->actor_admin_aggregator_key = aggregator->actor_admin_aggregator_key;
2015 new_aggregator->actor_oper_aggregator_key = aggregator->actor_oper_aggregator_key;
2016 new_aggregator->partner_system = aggregator->partner_system;
2017 new_aggregator->partner_system_priority = aggregator->partner_system_priority;
2018 new_aggregator->partner_oper_aggregator_key = aggregator->partner_oper_aggregator_key;
2019 new_aggregator->receive_state = aggregator->receive_state;
2020 new_aggregator->transmit_state = aggregator->transmit_state;
2021 new_aggregator->lag_ports = aggregator->lag_ports;
2022 new_aggregator->is_active = aggregator->is_active;
2023 new_aggregator->num_of_ports = aggregator->num_of_ports;
2024
2025 // update the information that is written on the ports about the aggregator
2026 for (temp_port=aggregator->lag_ports; temp_port; temp_port=temp_port->next_port_in_aggregator) {
2027 temp_port->aggregator=new_aggregator;
2028 temp_port->actor_port_aggregator_identifier = new_aggregator->aggregator_identifier;
2029 }
2030
2031 // clear the aggregator
2032 ad_clear_agg(aggregator);
2033
2034 if (select_new_active_agg) {
2035 ad_agg_selection_logic(__get_first_agg(port));
2036 }
2037 } else {
Mitch Williams4e0952c2005-11-09 10:34:57 -08002038 printk(KERN_WARNING DRV_NAME ": %s: Warning: unbinding aggregator, "
2039 "and could not find a new aggregator for its ports\n",
2040 slave->dev->master->name);
Linus Torvalds1da177e2005-04-16 15:20:36 -07002041 }
2042 } else { // in case that the only port related to this aggregator is the one we want to remove
2043 select_new_active_agg = aggregator->is_active;
2044 // clear the aggregator
2045 ad_clear_agg(aggregator);
2046 if (select_new_active_agg) {
Mitch Williams4e0952c2005-11-09 10:34:57 -08002047 printk(KERN_INFO DRV_NAME ": %s: Removing an active aggregator\n",
2048 slave->dev->master->name);
Linus Torvalds1da177e2005-04-16 15:20:36 -07002049 // select new active aggregator
2050 ad_agg_selection_logic(__get_first_agg(port));
2051 }
2052 }
2053 }
2054
2055 dprintk("Unbinding port %d\n", port->actor_port_number);
2056 // find the aggregator that this port is connected to
2057 temp_aggregator = __get_first_agg(port);
2058 for (; temp_aggregator; temp_aggregator = __get_next_agg(temp_aggregator)) {
2059 prev_port = NULL;
2060 // search the port in the aggregator's related ports
2061 for (temp_port=temp_aggregator->lag_ports; temp_port; prev_port=temp_port, temp_port=temp_port->next_port_in_aggregator) {
2062 if (temp_port == port) { // the aggregator found - detach the port from this aggregator
2063 if (prev_port) {
2064 prev_port->next_port_in_aggregator = temp_port->next_port_in_aggregator;
2065 } else {
2066 temp_aggregator->lag_ports = temp_port->next_port_in_aggregator;
2067 }
2068 temp_aggregator->num_of_ports--;
2069 if (temp_aggregator->num_of_ports==0) {
2070 select_new_active_agg = temp_aggregator->is_active;
2071 // clear the aggregator
2072 ad_clear_agg(temp_aggregator);
2073 if (select_new_active_agg) {
Mitch Williams4e0952c2005-11-09 10:34:57 -08002074 printk(KERN_INFO DRV_NAME ": %s: Removing an active aggregator\n",
2075 slave->dev->master->name);
Linus Torvalds1da177e2005-04-16 15:20:36 -07002076 // select new active aggregator
2077 ad_agg_selection_logic(__get_first_agg(port));
2078 }
2079 }
2080 break;
2081 }
2082 }
2083 }
2084 port->slave=NULL;
2085}
2086
2087/**
2088 * bond_3ad_state_machine_handler - handle state machines timeout
2089 * @bond: bonding struct to work on
2090 *
2091 * The state machine handling concept in this module is to check every tick
2092 * which state machine should operate any function. The execution order is
2093 * round robin, so when we have an interaction between state machines, the
2094 * reply of one to each other might be delayed until next tick.
2095 *
2096 * This function also complete the initialization when the agg_select_timer
2097 * times out, and it selects an aggregator for the ports that are yet not
2098 * related to any aggregator, and selects the active aggregator for a bond.
2099 */
2100void bond_3ad_state_machine_handler(struct bonding *bond)
2101{
2102 struct port *port;
2103 struct aggregator *aggregator;
2104
2105 read_lock(&bond->lock);
2106
2107 if (bond->kill_timers) {
2108 goto out;
2109 }
2110
2111 //check if there are any slaves
2112 if (bond->slave_cnt == 0) {
2113 goto re_arm;
2114 }
2115
2116 // check if agg_select_timer timer after initialize is timed out
2117 if (BOND_AD_INFO(bond).agg_select_timer && !(--BOND_AD_INFO(bond).agg_select_timer)) {
2118 // select the active aggregator for the bond
2119 if ((port = __get_first_port(bond))) {
2120 if (!port->slave) {
Mitch Williams4e0952c2005-11-09 10:34:57 -08002121 printk(KERN_WARNING DRV_NAME ": %s: Warning: bond's first port is "
2122 "uninitialized\n", bond->dev->name);
Linus Torvalds1da177e2005-04-16 15:20:36 -07002123 goto re_arm;
2124 }
2125
2126 aggregator = __get_first_agg(port);
2127 ad_agg_selection_logic(aggregator);
2128 }
2129 }
2130
2131 // for each port run the state machines
2132 for (port = __get_first_port(bond); port; port = __get_next_port(port)) {
2133 if (!port->slave) {
Mitch Williams4e0952c2005-11-09 10:34:57 -08002134 printk(KERN_WARNING DRV_NAME ": %s: Warning: Found an uninitialized "
2135 "port\n", bond->dev->name);
Linus Torvalds1da177e2005-04-16 15:20:36 -07002136 goto re_arm;
2137 }
2138
2139 ad_rx_machine(NULL, port);
2140 ad_periodic_machine(port);
2141 ad_port_selection_logic(port);
2142 ad_mux_machine(port);
2143 ad_tx_machine(port);
2144
2145 // turn off the BEGIN bit, since we already handled it
2146 if (port->sm_vars & AD_PORT_BEGIN) {
2147 port->sm_vars &= ~AD_PORT_BEGIN;
2148 }
2149 }
2150
2151re_arm:
2152 mod_timer(&(BOND_AD_INFO(bond).ad_timer), jiffies + ad_delta_in_ticks);
2153out:
2154 read_unlock(&bond->lock);
2155}
2156
2157/**
2158 * bond_3ad_rx_indication - handle a received frame
2159 * @lacpdu: received lacpdu
2160 * @slave: slave struct to work on
2161 * @length: length of the data received
2162 *
2163 * It is assumed that frames that were sent on this NIC don't returned as new
2164 * received frames (loopback). Since only the payload is given to this
2165 * function, it check for loopback.
2166 */
2167static void bond_3ad_rx_indication(struct lacpdu *lacpdu, struct slave *slave, u16 length)
2168{
2169 struct port *port;
2170
2171 if (length >= sizeof(struct lacpdu)) {
2172
2173 port = &(SLAVE_AD_INFO(slave).port);
2174
2175 if (!port->slave) {
Mitch Williams4e0952c2005-11-09 10:34:57 -08002176 printk(KERN_WARNING DRV_NAME ": %s: Warning: port of slave %s is "
2177 "uninitialized\n", slave->dev->name, slave->dev->master->name);
Linus Torvalds1da177e2005-04-16 15:20:36 -07002178 return;
2179 }
2180
2181 switch (lacpdu->subtype) {
2182 case AD_TYPE_LACPDU:
Linus Torvalds1da177e2005-04-16 15:20:36 -07002183 dprintk("Received LACPDU on port %d\n", port->actor_port_number);
2184 ad_rx_machine(lacpdu, port);
2185 break;
2186
2187 case AD_TYPE_MARKER:
2188 // No need to convert fields to Little Endian since we don't use the marker's fields.
2189
2190 switch (((struct marker *)lacpdu)->tlv_type) {
2191 case AD_MARKER_INFORMATION_SUBTYPE:
2192 dprintk("Received Marker Information on port %d\n", port->actor_port_number);
2193 ad_marker_info_received((struct marker *)lacpdu, port);
2194 break;
2195
2196 case AD_MARKER_RESPONSE_SUBTYPE:
2197 dprintk("Received Marker Response on port %d\n", port->actor_port_number);
2198 ad_marker_response_received((struct marker *)lacpdu, port);
2199 break;
2200
2201 default:
2202 dprintk("Received an unknown Marker subtype on slot %d\n", port->actor_port_number);
2203 }
2204 }
2205 }
2206}
2207
2208/**
2209 * bond_3ad_adapter_speed_changed - handle a slave's speed change indication
2210 * @slave: slave struct to work on
2211 *
2212 * Handle reselection of aggregator (if needed) for this port.
2213 */
2214void bond_3ad_adapter_speed_changed(struct slave *slave)
2215{
2216 struct port *port;
2217
2218 port = &(SLAVE_AD_INFO(slave).port);
2219
2220 // if slave is null, the whole port is not initialized
2221 if (!port->slave) {
Mitch Williams4e0952c2005-11-09 10:34:57 -08002222 printk(KERN_WARNING DRV_NAME ": Warning: %s: speed "
2223 "changed for uninitialized port on %s\n",
2224 slave->dev->master->name, slave->dev->name);
Linus Torvalds1da177e2005-04-16 15:20:36 -07002225 return;
2226 }
2227
2228 port->actor_admin_port_key &= ~AD_SPEED_KEY_BITS;
2229 port->actor_oper_port_key=port->actor_admin_port_key |= (__get_link_speed(port) << 1);
2230 dprintk("Port %d changed speed\n", port->actor_port_number);
2231 // there is no need to reselect a new aggregator, just signal the
2232 // state machines to reinitialize
2233 port->sm_vars |= AD_PORT_BEGIN;
2234}
2235
2236/**
2237 * bond_3ad_adapter_duplex_changed - handle a slave's duplex change indication
2238 * @slave: slave struct to work on
2239 *
2240 * Handle reselection of aggregator (if needed) for this port.
2241 */
2242void bond_3ad_adapter_duplex_changed(struct slave *slave)
2243{
2244 struct port *port;
2245
2246 port=&(SLAVE_AD_INFO(slave).port);
2247
2248 // if slave is null, the whole port is not initialized
2249 if (!port->slave) {
Mitch Williams4e0952c2005-11-09 10:34:57 -08002250 printk(KERN_WARNING DRV_NAME ": %s: Warning: duplex changed "
2251 "for uninitialized port on %s\n",
2252 slave->dev->master->name, slave->dev->name);
Linus Torvalds1da177e2005-04-16 15:20:36 -07002253 return;
2254 }
2255
2256 port->actor_admin_port_key &= ~AD_DUPLEX_KEY_BITS;
2257 port->actor_oper_port_key=port->actor_admin_port_key |= __get_duplex(port);
2258 dprintk("Port %d changed duplex\n", port->actor_port_number);
2259 // there is no need to reselect a new aggregator, just signal the
2260 // state machines to reinitialize
2261 port->sm_vars |= AD_PORT_BEGIN;
2262}
2263
2264/**
2265 * bond_3ad_handle_link_change - handle a slave's link status change indication
2266 * @slave: slave struct to work on
2267 * @status: whether the link is now up or down
2268 *
2269 * Handle reselection of aggregator (if needed) for this port.
2270 */
2271void bond_3ad_handle_link_change(struct slave *slave, char link)
2272{
2273 struct port *port;
2274
2275 port = &(SLAVE_AD_INFO(slave).port);
2276
2277 // if slave is null, the whole port is not initialized
2278 if (!port->slave) {
Mitch Williams4e0952c2005-11-09 10:34:57 -08002279 printk(KERN_WARNING DRV_NAME ": Warning: %s: link status changed for "
2280 "uninitialized port on %s\n",
2281 slave->dev->master->name, slave->dev->name);
Linus Torvalds1da177e2005-04-16 15:20:36 -07002282 return;
2283 }
2284
2285 // on link down we are zeroing duplex and speed since some of the adaptors(ce1000.lan) report full duplex/speed instead of N/A(duplex) / 0(speed)
2286 // on link up we are forcing recheck on the duplex and speed since some of he adaptors(ce1000.lan) report
2287 if (link == BOND_LINK_UP) {
2288 port->is_enabled = 1;
2289 port->actor_admin_port_key &= ~AD_DUPLEX_KEY_BITS;
2290 port->actor_oper_port_key=port->actor_admin_port_key |= __get_duplex(port);
2291 port->actor_admin_port_key &= ~AD_SPEED_KEY_BITS;
2292 port->actor_oper_port_key=port->actor_admin_port_key |= (__get_link_speed(port) << 1);
2293 } else {
2294 /* link has failed */
2295 port->is_enabled = 0;
2296 port->actor_admin_port_key &= ~AD_DUPLEX_KEY_BITS;
2297 port->actor_oper_port_key= (port->actor_admin_port_key &= ~AD_SPEED_KEY_BITS);
2298 }
2299 //BOND_PRINT_DBG(("Port %d changed link status to %s", port->actor_port_number, ((link == BOND_LINK_UP)?"UP":"DOWN")));
2300 // there is no need to reselect a new aggregator, just signal the
2301 // state machines to reinitialize
2302 port->sm_vars |= AD_PORT_BEGIN;
2303}
2304
Jay Vosburghff59c452006-03-27 13:27:43 -08002305/*
2306 * set link state for bonding master: if we have an active partnered
2307 * aggregator, we're up, if not, we're down. Presumes that we cannot
2308 * have an active aggregator if there are no slaves with link up.
2309 *
2310 * Called by bond_set_carrier(). Return zero if carrier state does not
2311 * change, nonzero if it does.
2312 */
2313int bond_3ad_set_carrier(struct bonding *bond)
2314{
2315 struct aggregator *agg;
2316
2317 agg = __get_active_agg(&(SLAVE_AD_INFO(bond->first_slave).aggregator));
2318 if (agg && MAC_ADDRESS_COMPARE(&agg->partner_system, &null_mac_addr)) {
2319 if (!netif_carrier_ok(bond->dev)) {
2320 netif_carrier_on(bond->dev);
2321 return 1;
2322 }
2323 return 0;
2324 }
2325
2326 if (netif_carrier_ok(bond->dev)) {
2327 netif_carrier_off(bond->dev);
2328 return 1;
2329 }
2330 return 0;
2331}
2332
Linus Torvalds1da177e2005-04-16 15:20:36 -07002333/**
2334 * bond_3ad_get_active_agg_info - get information of the active aggregator
2335 * @bond: bonding struct to work on
2336 * @ad_info: ad_info struct to fill with the bond's info
2337 *
2338 * Returns: 0 on success
2339 * < 0 on error
2340 */
2341int bond_3ad_get_active_agg_info(struct bonding *bond, struct ad_info *ad_info)
2342{
2343 struct aggregator *aggregator = NULL;
2344 struct port *port;
2345
2346 for (port = __get_first_port(bond); port; port = __get_next_port(port)) {
2347 if (port->aggregator && port->aggregator->is_active) {
2348 aggregator = port->aggregator;
2349 break;
2350 }
2351 }
2352
2353 if (aggregator) {
2354 ad_info->aggregator_id = aggregator->aggregator_identifier;
2355 ad_info->ports = aggregator->num_of_ports;
2356 ad_info->actor_key = aggregator->actor_oper_aggregator_key;
2357 ad_info->partner_key = aggregator->partner_oper_aggregator_key;
2358 memcpy(ad_info->partner_system, aggregator->partner_system.mac_addr_value, ETH_ALEN);
2359 return 0;
2360 }
2361
2362 return -1;
2363}
2364
2365int bond_3ad_xmit_xor(struct sk_buff *skb, struct net_device *dev)
2366{
2367 struct slave *slave, *start_at;
2368 struct bonding *bond = dev->priv;
Linus Torvalds1da177e2005-04-16 15:20:36 -07002369 int slave_agg_no;
2370 int slaves_in_agg;
2371 int agg_id;
2372 int i;
2373 struct ad_info ad_info;
2374 int res = 1;
2375
2376 /* make sure that the slaves list will
2377 * not change during tx
2378 */
2379 read_lock(&bond->lock);
2380
2381 if (!BOND_IS_OK(bond)) {
2382 goto out;
2383 }
2384
2385 if (bond_3ad_get_active_agg_info(bond, &ad_info)) {
Mitch Williams4e0952c2005-11-09 10:34:57 -08002386 printk(KERN_DEBUG DRV_NAME ": %s: Error: "
2387 "bond_3ad_get_active_agg_info failed\n", dev->name);
Linus Torvalds1da177e2005-04-16 15:20:36 -07002388 goto out;
2389 }
2390
2391 slaves_in_agg = ad_info.ports;
2392 agg_id = ad_info.aggregator_id;
2393
2394 if (slaves_in_agg == 0) {
2395 /*the aggregator is empty*/
Mitch Williams4e0952c2005-11-09 10:34:57 -08002396 printk(KERN_DEBUG DRV_NAME ": %s: Error: active "
2397 "aggregator is empty\n",
2398 dev->name);
Linus Torvalds1da177e2005-04-16 15:20:36 -07002399 goto out;
2400 }
2401
Jay Vosburgh169a3e62005-06-26 17:54:11 -04002402 slave_agg_no = bond->xmit_hash_policy(skb, dev, slaves_in_agg);
Linus Torvalds1da177e2005-04-16 15:20:36 -07002403
2404 bond_for_each_slave(bond, slave, i) {
2405 struct aggregator *agg = SLAVE_AD_INFO(slave).port.aggregator;
2406
2407 if (agg && (agg->aggregator_identifier == agg_id)) {
2408 slave_agg_no--;
2409 if (slave_agg_no < 0) {
2410 break;
2411 }
2412 }
2413 }
2414
2415 if (slave_agg_no >= 0) {
Mitch Williams4e0952c2005-11-09 10:34:57 -08002416 printk(KERN_ERR DRV_NAME ": %s: Error: Couldn't find a slave to tx on "
2417 "for aggregator ID %d\n", dev->name, agg_id);
Linus Torvalds1da177e2005-04-16 15:20:36 -07002418 goto out;
2419 }
2420
2421 start_at = slave;
2422
2423 bond_for_each_slave_from(bond, slave, i, start_at) {
2424 int slave_agg_id = 0;
2425 struct aggregator *agg = SLAVE_AD_INFO(slave).port.aggregator;
2426
2427 if (agg) {
2428 slave_agg_id = agg->aggregator_identifier;
2429 }
2430
2431 if (SLAVE_IS_OK(slave) && agg && (slave_agg_id == agg_id)) {
2432 res = bond_dev_queue_xmit(bond, skb, slave->dev);
2433 break;
2434 }
2435 }
2436
2437out:
2438 if (res) {
2439 /* no suitable interface, frame not sent */
2440 dev_kfree_skb(skb);
2441 }
2442 read_unlock(&bond->lock);
2443 return 0;
2444}
2445
David S. Millerf2ccd8f2005-08-09 19:34:12 -07002446int bond_3ad_lacpdu_recv(struct sk_buff *skb, struct net_device *dev, struct packet_type* ptype, struct net_device *orig_dev)
Linus Torvalds1da177e2005-04-16 15:20:36 -07002447{
2448 struct bonding *bond = dev->priv;
2449 struct slave *slave = NULL;
2450 int ret = NET_RX_DROP;
2451
David S. Millerf2ccd8f2005-08-09 19:34:12 -07002452 if (!(dev->flags & IFF_MASTER))
Linus Torvalds1da177e2005-04-16 15:20:36 -07002453 goto out;
Linus Torvalds1da177e2005-04-16 15:20:36 -07002454
2455 read_lock(&bond->lock);
David S. Millerf2ccd8f2005-08-09 19:34:12 -07002456 slave = bond_get_slave_by_dev((struct bonding *)dev->priv, orig_dev);
2457 if (!slave)
Linus Torvalds1da177e2005-04-16 15:20:36 -07002458 goto out_unlock;
Linus Torvalds1da177e2005-04-16 15:20:36 -07002459
2460 bond_3ad_rx_indication((struct lacpdu *) skb->data, slave, skb->len);
2461
2462 ret = NET_RX_SUCCESS;
2463
2464out_unlock:
2465 read_unlock(&bond->lock);
2466out:
2467 dev_kfree_skb(skb);
2468
2469 return ret;
2470}
2471