blob: 48981ca801a5527b8b2df375237d595ec98dc388 [file] [log] [blame]
Chao Xie902ca222012-05-07 11:24:01 +08001/*
2 * PXA910 Power Management Routines
3 *
4 * This software program is licensed subject to the GNU General Public License
5 * (GPL).Version 2,June 1991, available at http://www.fsf.org/copyleft/gpl.html
6 *
7 * (C) Copyright 2009 Marvell International Ltd.
8 * All Rights Reserved
9 */
10
11#include <linux/kernel.h>
12#include <linux/errno.h>
13#include <linux/err.h>
14#include <linux/time.h>
15#include <linux/delay.h>
16#include <linux/suspend.h>
17#include <linux/interrupt.h>
18#include <linux/io.h>
19#include <linux/irq.h>
20#include <asm/mach-types.h>
21#include <mach/hardware.h>
22#include <mach/cputype.h>
23#include <mach/addr-map.h>
24#include <mach/pm-pxa910.h>
25#include <mach/regs-icu.h>
26#include <mach/irqs.h>
27
28int pxa910_set_wake(struct irq_data *data, unsigned int on)
29{
30 int irq = data->irq;
31 struct irq_desc *desc = irq_to_desc(data->irq);
32 uint32_t awucrm = 0, apcr = 0;
33
34 if (unlikely(irq >= nr_irqs)) {
35 pr_err("IRQ nubmers are out of boundary!\n");
36 return -EINVAL;
37 }
38
39 if (on) {
40 if (desc->action)
41 desc->action->flags |= IRQF_NO_SUSPEND;
42 } else {
43 if (desc->action)
44 desc->action->flags &= ~IRQF_NO_SUSPEND;
45 }
46
47 /* setting wakeup sources */
48 switch (irq) {
49 /* wakeup line 2 */
50 case IRQ_PXA910_AP_GPIO:
51 awucrm = MPMU_AWUCRM_WAKEUP(2);
52 apcr |= MPMU_APCR_SLPWP2;
53 break;
54 /* wakeup line 3 */
55 case IRQ_PXA910_KEYPAD:
56 awucrm = MPMU_AWUCRM_WAKEUP(3) | MPMU_AWUCRM_KEYPRESS;
57 apcr |= MPMU_APCR_SLPWP3;
58 break;
59 case IRQ_PXA910_ROTARY:
60 awucrm = MPMU_AWUCRM_WAKEUP(3) | MPMU_AWUCRM_NEWROTARY;
61 apcr |= MPMU_APCR_SLPWP3;
62 break;
63 case IRQ_PXA910_TRACKBALL:
64 awucrm = MPMU_AWUCRM_WAKEUP(3) | MPMU_AWUCRM_TRACKBALL;
65 apcr |= MPMU_APCR_SLPWP3;
66 break;
67 /* wakeup line 4 */
68 case IRQ_PXA910_AP1_TIMER1:
69 awucrm = MPMU_AWUCRM_WAKEUP(4) | MPMU_AWUCRM_AP1_TIMER_1;
70 apcr |= MPMU_APCR_SLPWP4;
71 break;
72 case IRQ_PXA910_AP1_TIMER2:
73 awucrm = MPMU_AWUCRM_WAKEUP(4) | MPMU_AWUCRM_AP1_TIMER_2;
74 apcr |= MPMU_APCR_SLPWP4;
75 break;
76 case IRQ_PXA910_AP1_TIMER3:
77 awucrm = MPMU_AWUCRM_WAKEUP(4) | MPMU_AWUCRM_AP1_TIMER_3;
78 apcr |= MPMU_APCR_SLPWP4;
79 break;
80 case IRQ_PXA910_AP2_TIMER1:
81 awucrm = MPMU_AWUCRM_WAKEUP(4) | MPMU_AWUCRM_AP2_TIMER_1;
82 apcr |= MPMU_APCR_SLPWP4;
83 break;
84 case IRQ_PXA910_AP2_TIMER2:
85 awucrm = MPMU_AWUCRM_WAKEUP(4) | MPMU_AWUCRM_AP2_TIMER_2;
86 apcr |= MPMU_APCR_SLPWP4;
87 break;
88 case IRQ_PXA910_AP2_TIMER3:
89 awucrm = MPMU_AWUCRM_WAKEUP(4) | MPMU_AWUCRM_AP2_TIMER_3;
90 apcr |= MPMU_APCR_SLPWP4;
91 break;
92 case IRQ_PXA910_RTC_ALARM:
93 awucrm = MPMU_AWUCRM_WAKEUP(4) | MPMU_AWUCRM_RTC_ALARM;
94 apcr |= MPMU_APCR_SLPWP4;
95 break;
96 /* wakeup line 5 */
97 case IRQ_PXA910_USB1:
98 case IRQ_PXA910_USB2:
99 awucrm = MPMU_AWUCRM_WAKEUP(5);
100 apcr |= MPMU_APCR_SLPWP5;
101 break;
102 /* wakeup line 6 */
103 case IRQ_PXA910_MMC:
104 awucrm = MPMU_AWUCRM_WAKEUP(6)
105 | MPMU_AWUCRM_SDH1
106 | MPMU_AWUCRM_SDH2;
107 apcr |= MPMU_APCR_SLPWP6;
108 break;
109 /* wakeup line 7 */
110 case IRQ_PXA910_PMIC_INT:
111 awucrm = MPMU_AWUCRM_WAKEUP(7);
112 apcr |= MPMU_APCR_SLPWP7;
113 break;
114 default:
115 if (irq >= IRQ_GPIO_START && irq < IRQ_BOARD_START) {
116 awucrm = MPMU_AWUCRM_WAKEUP(2);
117 apcr |= MPMU_APCR_SLPWP2;
118 } else
119 printk(KERN_ERR "Error: no defined wake up source irq: %d\n",
120 irq);
121 }
122
123 if (on) {
124 if (awucrm) {
125 awucrm |= __raw_readl(MPMU_AWUCRM);
126 __raw_writel(awucrm, MPMU_AWUCRM);
127 }
128 if (apcr) {
129 apcr = ~apcr & __raw_readl(MPMU_APCR);
130 __raw_writel(apcr, MPMU_APCR);
131 }
132 } else {
133 if (awucrm) {
134 awucrm = ~awucrm & __raw_readl(MPMU_AWUCRM);
135 __raw_writel(awucrm, MPMU_AWUCRM);
136 }
137 if (apcr) {
138 apcr |= __raw_readl(MPMU_APCR);
139 __raw_writel(apcr, MPMU_APCR);
140 }
141 }
142 return 0;
143}
144
145void pxa910_pm_enter_lowpower_mode(int state)
146{
147 uint32_t idle_cfg, apcr;
148
149 idle_cfg = __raw_readl(APMU_MOH_IDLE_CFG);
150 apcr = __raw_readl(MPMU_APCR);
151
152 apcr &= ~(MPMU_APCR_DDRCORSD | MPMU_APCR_APBSD | MPMU_APCR_AXISD
153 | MPMU_APCR_VCTCXOSD | MPMU_APCR_STBYEN);
154 idle_cfg &= ~(APMU_MOH_IDLE_CFG_MOH_IDLE
155 | APMU_MOH_IDLE_CFG_MOH_PWRDWN);
156
157 switch (state) {
158 case POWER_MODE_UDR:
159 /* only shutdown APB in UDR */
160 apcr |= MPMU_APCR_STBYEN | MPMU_APCR_APBSD;
161 /* fall through */
162 case POWER_MODE_SYS_SLEEP:
163 apcr |= MPMU_APCR_SLPEN; /* set the SLPEN bit */
164 apcr |= MPMU_APCR_VCTCXOSD; /* set VCTCXOSD */
165 /* fall through */
166 case POWER_MODE_APPS_SLEEP:
167 apcr |= MPMU_APCR_DDRCORSD; /* set DDRCORSD */
168 /* fall through */
169 case POWER_MODE_APPS_IDLE:
170 apcr |= MPMU_APCR_AXISD; /* set AXISDD bit */
171 /* fall through */
172 case POWER_MODE_CORE_EXTIDLE:
173 idle_cfg |= APMU_MOH_IDLE_CFG_MOH_IDLE;
174 idle_cfg |= APMU_MOH_IDLE_CFG_MOH_PWRDWN;
175 idle_cfg |= APMU_MOH_IDLE_CFG_MOH_PWR_SW(3)
176 | APMU_MOH_IDLE_CFG_MOH_L2_PWR_SW(3);
177 /* fall through */
178 case POWER_MODE_CORE_INTIDLE:
179 break;
180 }
181
182 /* program the memory controller hardware sleep type and auto wakeup */
183 idle_cfg |= APMU_MOH_IDLE_CFG_MOH_DIS_MC_SW_REQ;
184 idle_cfg |= APMU_MOH_IDLE_CFG_MOH_MC_WAKE_EN;
185 __raw_writel(0x0, APMU_MC_HW_SLP_TYPE); /* auto refresh */
186
187 /* set DSPSD, DTCMSD, BBSD, MSASLPEN */
188 apcr |= MPMU_APCR_DSPSD | MPMU_APCR_DTCMSD | MPMU_APCR_BBSD
189 | MPMU_APCR_MSASLPEN;
190
191 /*always set SLEPEN bit mainly for MSA*/
192 apcr |= MPMU_APCR_SLPEN;
193
194 /* finally write the registers back */
195 __raw_writel(idle_cfg, APMU_MOH_IDLE_CFG);
196 __raw_writel(apcr, MPMU_APCR);
197
198}
199
200static int pxa910_pm_enter(suspend_state_t state)
201{
202 unsigned int idle_cfg, reg = 0;
203
204 /*pmic thread not completed,exit;otherwise system can't be waked up*/
205 reg = __raw_readl(ICU_INT_CONF(IRQ_PXA910_PMIC_INT));
206 if ((reg & 0x3) == 0)
207 return -EAGAIN;
208
209 idle_cfg = __raw_readl(APMU_MOH_IDLE_CFG);
210 idle_cfg |= APMU_MOH_IDLE_CFG_MOH_PWRDWN
211 | APMU_MOH_IDLE_CFG_MOH_SRAM_PWRDWN;
212 __raw_writel(idle_cfg, APMU_MOH_IDLE_CFG);
213
214 /* disable L2 */
215 outer_disable();
216 /* wait for l2 idle */
217 while (!(readl(CIU_REG(0x8)) & (1 << 16)))
218 udelay(1);
219
220 cpu_do_idle();
221
222 /* enable L2 */
223 outer_resume();
224 /* wait for l2 idle */
225 while (!(readl(CIU_REG(0x8)) & (1 << 16)))
226 udelay(1);
227
228 idle_cfg = __raw_readl(APMU_MOH_IDLE_CFG);
229 idle_cfg &= ~(APMU_MOH_IDLE_CFG_MOH_PWRDWN
230 | APMU_MOH_IDLE_CFG_MOH_SRAM_PWRDWN);
231 __raw_writel(idle_cfg, APMU_MOH_IDLE_CFG);
232
233 return 0;
234}
235
236/*
237 * Called after processes are frozen, but before we shut down devices.
238 */
239static int pxa910_pm_prepare(void)
240{
241 pxa910_pm_enter_lowpower_mode(POWER_MODE_UDR);
242 return 0;
243}
244
245/*
246 * Called after devices are re-setup, but before processes are thawed.
247 */
248static void pxa910_pm_finish(void)
249{
250 pxa910_pm_enter_lowpower_mode(POWER_MODE_CORE_INTIDLE);
251}
252
253static int pxa910_pm_valid(suspend_state_t state)
254{
255 return ((state == PM_SUSPEND_STANDBY) || (state == PM_SUSPEND_MEM));
256}
257
258static const struct platform_suspend_ops pxa910_pm_ops = {
259 .valid = pxa910_pm_valid,
260 .prepare = pxa910_pm_prepare,
261 .enter = pxa910_pm_enter,
262 .finish = pxa910_pm_finish,
263};
264
265static int __init pxa910_pm_init(void)
266{
267 uint32_t awucrm = 0;
268
269 if (!cpu_is_pxa910())
270 return -EIO;
271
272 suspend_set_ops(&pxa910_pm_ops);
273
274 /* Set the following bits for MMP3 playback with VCTXO on */
275 __raw_writel(__raw_readl(APMU_SQU_CLK_GATE_CTRL) | (1 << 30),
276 APMU_SQU_CLK_GATE_CTRL);
277 __raw_writel(__raw_readl(MPMU_FCCR) | (1 << 28), MPMU_FCCR);
278
279 awucrm |= MPMU_AWUCRM_AP_ASYNC_INT | MPMU_AWUCRM_AP_FULL_IDLE;
280 __raw_writel(awucrm, MPMU_AWUCRM);
281
282 return 0;
283}
284
285late_initcall(pxa910_pm_init);