Maximilian Schneider | d08e973 | 2013-12-24 19:29:45 +0000 | [diff] [blame] | 1 | /* CAN driver for Geschwister Schneider USB/CAN devices. |
| 2 | * |
| 3 | * Copyright (C) 2013 Geschwister Schneider Technologie-, |
| 4 | * Entwicklungs- und Vertriebs UG (Haftungsbeschränkt). |
| 5 | * |
| 6 | * Many thanks to all socketcan devs! |
| 7 | * |
| 8 | * This program is free software; you can redistribute it and/or modify it |
| 9 | * under the terms of the GNU General Public License as published |
| 10 | * by the Free Software Foundation; version 2 of the License. |
| 11 | * |
| 12 | * This program is distributed in the hope that it will be useful, but |
| 13 | * WITHOUT ANY WARRANTY; without even the implied warranty of |
| 14 | * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU |
| 15 | * General Public License for more details. |
| 16 | */ |
| 17 | |
| 18 | #include <linux/init.h> |
| 19 | #include <linux/signal.h> |
| 20 | #include <linux/module.h> |
| 21 | #include <linux/netdevice.h> |
| 22 | #include <linux/usb.h> |
| 23 | |
| 24 | #include <linux/can.h> |
| 25 | #include <linux/can/dev.h> |
| 26 | #include <linux/can/error.h> |
| 27 | |
| 28 | /* Device specific constants */ |
| 29 | #define USB_GSUSB_1_VENDOR_ID 0x1d50 |
| 30 | #define USB_GSUSB_1_PRODUCT_ID 0x606f |
| 31 | |
| 32 | #define GSUSB_ENDPOINT_IN 1 |
| 33 | #define GSUSB_ENDPOINT_OUT 2 |
| 34 | |
| 35 | /* Device specific constants */ |
| 36 | enum gs_usb_breq { |
| 37 | GS_USB_BREQ_HOST_FORMAT = 0, |
| 38 | GS_USB_BREQ_BITTIMING, |
| 39 | GS_USB_BREQ_MODE, |
| 40 | GS_USB_BREQ_BERR, |
| 41 | GS_USB_BREQ_BT_CONST, |
| 42 | GS_USB_BREQ_DEVICE_CONFIG |
| 43 | }; |
| 44 | |
| 45 | enum gs_can_mode { |
| 46 | /* reset a channel. turns it off */ |
| 47 | GS_CAN_MODE_RESET = 0, |
| 48 | /* starts a channel */ |
| 49 | GS_CAN_MODE_START |
| 50 | }; |
| 51 | |
| 52 | enum gs_can_state { |
| 53 | GS_CAN_STATE_ERROR_ACTIVE = 0, |
| 54 | GS_CAN_STATE_ERROR_WARNING, |
| 55 | GS_CAN_STATE_ERROR_PASSIVE, |
| 56 | GS_CAN_STATE_BUS_OFF, |
| 57 | GS_CAN_STATE_STOPPED, |
| 58 | GS_CAN_STATE_SLEEPING |
| 59 | }; |
| 60 | |
| 61 | /* data types passed between host and device */ |
| 62 | struct gs_host_config { |
| 63 | u32 byte_order; |
| 64 | } __packed; |
| 65 | /* All data exchanged between host and device is exchanged in host byte order, |
| 66 | * thanks to the struct gs_host_config byte_order member, which is sent first |
| 67 | * to indicate the desired byte order. |
| 68 | */ |
| 69 | |
| 70 | struct gs_device_config { |
| 71 | u8 reserved1; |
| 72 | u8 reserved2; |
| 73 | u8 reserved3; |
| 74 | u8 icount; |
| 75 | u32 sw_version; |
| 76 | u32 hw_version; |
| 77 | } __packed; |
| 78 | |
| 79 | #define GS_CAN_MODE_NORMAL 0 |
| 80 | #define GS_CAN_MODE_LISTEN_ONLY (1<<0) |
| 81 | #define GS_CAN_MODE_LOOP_BACK (1<<1) |
| 82 | #define GS_CAN_MODE_TRIPLE_SAMPLE (1<<2) |
| 83 | #define GS_CAN_MODE_ONE_SHOT (1<<3) |
| 84 | |
| 85 | struct gs_device_mode { |
| 86 | u32 mode; |
| 87 | u32 flags; |
| 88 | } __packed; |
| 89 | |
| 90 | struct gs_device_state { |
| 91 | u32 state; |
| 92 | u32 rxerr; |
| 93 | u32 txerr; |
| 94 | } __packed; |
| 95 | |
| 96 | struct gs_device_bittiming { |
| 97 | u32 prop_seg; |
| 98 | u32 phase_seg1; |
| 99 | u32 phase_seg2; |
| 100 | u32 sjw; |
| 101 | u32 brp; |
| 102 | } __packed; |
| 103 | |
| 104 | #define GS_CAN_FEATURE_LISTEN_ONLY (1<<0) |
| 105 | #define GS_CAN_FEATURE_LOOP_BACK (1<<1) |
| 106 | #define GS_CAN_FEATURE_TRIPLE_SAMPLE (1<<2) |
| 107 | #define GS_CAN_FEATURE_ONE_SHOT (1<<3) |
| 108 | |
| 109 | struct gs_device_bt_const { |
| 110 | u32 feature; |
| 111 | u32 fclk_can; |
| 112 | u32 tseg1_min; |
| 113 | u32 tseg1_max; |
| 114 | u32 tseg2_min; |
| 115 | u32 tseg2_max; |
| 116 | u32 sjw_max; |
| 117 | u32 brp_min; |
| 118 | u32 brp_max; |
| 119 | u32 brp_inc; |
| 120 | } __packed; |
| 121 | |
| 122 | #define GS_CAN_FLAG_OVERFLOW 1 |
| 123 | |
| 124 | struct gs_host_frame { |
| 125 | u32 echo_id; |
| 126 | u32 can_id; |
| 127 | |
| 128 | u8 can_dlc; |
| 129 | u8 channel; |
| 130 | u8 flags; |
| 131 | u8 reserved; |
| 132 | |
| 133 | u8 data[8]; |
| 134 | } __packed; |
| 135 | /* The GS USB devices make use of the same flags and masks as in |
| 136 | * linux/can.h and linux/can/error.h, and no additional mapping is necessary. |
| 137 | */ |
| 138 | |
| 139 | /* Only send a max of GS_MAX_TX_URBS frames per channel at a time. */ |
| 140 | #define GS_MAX_TX_URBS 10 |
| 141 | /* Only launch a max of GS_MAX_RX_URBS usb requests at a time. */ |
| 142 | #define GS_MAX_RX_URBS 30 |
| 143 | /* Maximum number of interfaces the driver supports per device. |
| 144 | * Current hardware only supports 2 interfaces. The future may vary. |
| 145 | */ |
| 146 | #define GS_MAX_INTF 2 |
| 147 | |
| 148 | struct gs_tx_context { |
| 149 | struct gs_can *dev; |
| 150 | unsigned int echo_id; |
| 151 | }; |
| 152 | |
| 153 | struct gs_can { |
| 154 | struct can_priv can; /* must be the first member */ |
| 155 | |
| 156 | struct gs_usb *parent; |
| 157 | |
| 158 | struct net_device *netdev; |
| 159 | struct usb_device *udev; |
| 160 | struct usb_interface *iface; |
| 161 | |
| 162 | struct can_bittiming_const bt_const; |
| 163 | unsigned int channel; /* channel number */ |
| 164 | |
Nik Nyby | ae421e3 | 2015-06-29 19:09:57 -0400 | [diff] [blame] | 165 | /* This lock prevents a race condition between xmit and receive. */ |
Maximilian Schneider | d08e973 | 2013-12-24 19:29:45 +0000 | [diff] [blame] | 166 | spinlock_t tx_ctx_lock; |
| 167 | struct gs_tx_context tx_context[GS_MAX_TX_URBS]; |
| 168 | |
| 169 | struct usb_anchor tx_submitted; |
| 170 | atomic_t active_tx_urbs; |
| 171 | }; |
| 172 | |
| 173 | /* usb interface struct */ |
| 174 | struct gs_usb { |
| 175 | struct gs_can *canch[GS_MAX_INTF]; |
| 176 | struct usb_anchor rx_submitted; |
| 177 | atomic_t active_channels; |
| 178 | struct usb_device *udev; |
| 179 | }; |
| 180 | |
| 181 | /* 'allocate' a tx context. |
| 182 | * returns a valid tx context or NULL if there is no space. |
| 183 | */ |
| 184 | static struct gs_tx_context *gs_alloc_tx_context(struct gs_can *dev) |
| 185 | { |
| 186 | int i = 0; |
| 187 | unsigned long flags; |
| 188 | |
| 189 | spin_lock_irqsave(&dev->tx_ctx_lock, flags); |
| 190 | |
| 191 | for (; i < GS_MAX_TX_URBS; i++) { |
| 192 | if (dev->tx_context[i].echo_id == GS_MAX_TX_URBS) { |
| 193 | dev->tx_context[i].echo_id = i; |
| 194 | spin_unlock_irqrestore(&dev->tx_ctx_lock, flags); |
| 195 | return &dev->tx_context[i]; |
| 196 | } |
| 197 | } |
| 198 | |
| 199 | spin_unlock_irqrestore(&dev->tx_ctx_lock, flags); |
| 200 | return NULL; |
| 201 | } |
| 202 | |
| 203 | /* releases a tx context |
| 204 | */ |
| 205 | static void gs_free_tx_context(struct gs_tx_context *txc) |
| 206 | { |
| 207 | txc->echo_id = GS_MAX_TX_URBS; |
| 208 | } |
| 209 | |
| 210 | /* Get a tx context by id. |
| 211 | */ |
| 212 | static struct gs_tx_context *gs_get_tx_context(struct gs_can *dev, unsigned int id) |
| 213 | { |
| 214 | unsigned long flags; |
| 215 | |
| 216 | if (id < GS_MAX_TX_URBS) { |
| 217 | spin_lock_irqsave(&dev->tx_ctx_lock, flags); |
| 218 | if (dev->tx_context[id].echo_id == id) { |
| 219 | spin_unlock_irqrestore(&dev->tx_ctx_lock, flags); |
| 220 | return &dev->tx_context[id]; |
| 221 | } |
| 222 | spin_unlock_irqrestore(&dev->tx_ctx_lock, flags); |
| 223 | } |
| 224 | return NULL; |
| 225 | } |
| 226 | |
| 227 | static int gs_cmd_reset(struct gs_usb *gsusb, struct gs_can *gsdev) |
| 228 | { |
| 229 | struct gs_device_mode *dm; |
| 230 | struct usb_interface *intf = gsdev->iface; |
| 231 | int rc; |
| 232 | |
| 233 | dm = kzalloc(sizeof(*dm), GFP_KERNEL); |
| 234 | if (!dm) |
| 235 | return -ENOMEM; |
| 236 | |
| 237 | dm->mode = GS_CAN_MODE_RESET; |
| 238 | |
| 239 | rc = usb_control_msg(interface_to_usbdev(intf), |
| 240 | usb_sndctrlpipe(interface_to_usbdev(intf), 0), |
| 241 | GS_USB_BREQ_MODE, |
| 242 | USB_DIR_OUT|USB_TYPE_VENDOR|USB_RECIP_INTERFACE, |
| 243 | gsdev->channel, |
| 244 | 0, |
| 245 | dm, |
| 246 | sizeof(*dm), |
| 247 | 1000); |
| 248 | |
| 249 | return rc; |
| 250 | } |
| 251 | |
| 252 | static void gs_update_state(struct gs_can *dev, struct can_frame *cf) |
| 253 | { |
| 254 | struct can_device_stats *can_stats = &dev->can.can_stats; |
| 255 | |
| 256 | if (cf->can_id & CAN_ERR_RESTARTED) { |
| 257 | dev->can.state = CAN_STATE_ERROR_ACTIVE; |
| 258 | can_stats->restarts++; |
| 259 | } else if (cf->can_id & CAN_ERR_BUSOFF) { |
| 260 | dev->can.state = CAN_STATE_BUS_OFF; |
| 261 | can_stats->bus_off++; |
| 262 | } else if (cf->can_id & CAN_ERR_CRTL) { |
| 263 | if ((cf->data[1] & CAN_ERR_CRTL_TX_WARNING) || |
| 264 | (cf->data[1] & CAN_ERR_CRTL_RX_WARNING)) { |
| 265 | dev->can.state = CAN_STATE_ERROR_WARNING; |
| 266 | can_stats->error_warning++; |
| 267 | } else if ((cf->data[1] & CAN_ERR_CRTL_TX_PASSIVE) || |
| 268 | (cf->data[1] & CAN_ERR_CRTL_RX_PASSIVE)) { |
| 269 | dev->can.state = CAN_STATE_ERROR_PASSIVE; |
| 270 | can_stats->error_passive++; |
| 271 | } else { |
| 272 | dev->can.state = CAN_STATE_ERROR_ACTIVE; |
| 273 | } |
| 274 | } |
| 275 | } |
| 276 | |
Nik Nyby | ae421e3 | 2015-06-29 19:09:57 -0400 | [diff] [blame] | 277 | static void gs_usb_receive_bulk_callback(struct urb *urb) |
Maximilian Schneider | d08e973 | 2013-12-24 19:29:45 +0000 | [diff] [blame] | 278 | { |
| 279 | struct gs_usb *usbcan = urb->context; |
| 280 | struct gs_can *dev; |
| 281 | struct net_device *netdev; |
| 282 | int rc; |
| 283 | struct net_device_stats *stats; |
| 284 | struct gs_host_frame *hf = urb->transfer_buffer; |
| 285 | struct gs_tx_context *txc; |
| 286 | struct can_frame *cf; |
| 287 | struct sk_buff *skb; |
| 288 | |
| 289 | BUG_ON(!usbcan); |
| 290 | |
| 291 | switch (urb->status) { |
| 292 | case 0: /* success */ |
| 293 | break; |
| 294 | case -ENOENT: |
| 295 | case -ESHUTDOWN: |
| 296 | return; |
| 297 | default: |
| 298 | /* do not resubmit aborted urbs. eg: when device goes down */ |
| 299 | return; |
| 300 | } |
| 301 | |
| 302 | /* device reports out of range channel id */ |
| 303 | if (hf->channel >= GS_MAX_INTF) |
| 304 | goto resubmit_urb; |
| 305 | |
| 306 | dev = usbcan->canch[hf->channel]; |
| 307 | |
| 308 | netdev = dev->netdev; |
| 309 | stats = &netdev->stats; |
| 310 | |
| 311 | if (!netif_device_present(netdev)) |
| 312 | return; |
| 313 | |
| 314 | if (hf->echo_id == -1) { /* normal rx */ |
| 315 | skb = alloc_can_skb(dev->netdev, &cf); |
| 316 | if (!skb) |
| 317 | return; |
| 318 | |
| 319 | cf->can_id = hf->can_id; |
| 320 | |
| 321 | cf->can_dlc = get_can_dlc(hf->can_dlc); |
| 322 | memcpy(cf->data, hf->data, 8); |
| 323 | |
| 324 | /* ERROR frames tell us information about the controller */ |
| 325 | if (hf->can_id & CAN_ERR_FLAG) |
| 326 | gs_update_state(dev, cf); |
| 327 | |
| 328 | netdev->stats.rx_packets++; |
| 329 | netdev->stats.rx_bytes += hf->can_dlc; |
| 330 | |
| 331 | netif_rx(skb); |
| 332 | } else { /* echo_id == hf->echo_id */ |
| 333 | if (hf->echo_id >= GS_MAX_TX_URBS) { |
| 334 | netdev_err(netdev, |
| 335 | "Unexpected out of range echo id %d\n", |
| 336 | hf->echo_id); |
| 337 | goto resubmit_urb; |
| 338 | } |
| 339 | |
| 340 | netdev->stats.tx_packets++; |
| 341 | netdev->stats.tx_bytes += hf->can_dlc; |
| 342 | |
| 343 | txc = gs_get_tx_context(dev, hf->echo_id); |
| 344 | |
| 345 | /* bad devices send bad echo_ids. */ |
| 346 | if (!txc) { |
| 347 | netdev_err(netdev, |
| 348 | "Unexpected unused echo id %d\n", |
| 349 | hf->echo_id); |
| 350 | goto resubmit_urb; |
| 351 | } |
| 352 | |
| 353 | can_get_echo_skb(netdev, hf->echo_id); |
| 354 | |
| 355 | gs_free_tx_context(txc); |
| 356 | |
| 357 | netif_wake_queue(netdev); |
| 358 | } |
| 359 | |
| 360 | if (hf->flags & GS_CAN_FLAG_OVERFLOW) { |
| 361 | skb = alloc_can_err_skb(netdev, &cf); |
| 362 | if (!skb) |
| 363 | goto resubmit_urb; |
| 364 | |
| 365 | cf->can_id |= CAN_ERR_CRTL; |
| 366 | cf->can_dlc = CAN_ERR_DLC; |
| 367 | cf->data[1] = CAN_ERR_CRTL_RX_OVERFLOW; |
| 368 | stats->rx_over_errors++; |
| 369 | stats->rx_errors++; |
| 370 | netif_rx(skb); |
| 371 | } |
| 372 | |
| 373 | resubmit_urb: |
| 374 | usb_fill_bulk_urb(urb, |
| 375 | usbcan->udev, |
| 376 | usb_rcvbulkpipe(usbcan->udev, GSUSB_ENDPOINT_IN), |
| 377 | hf, |
| 378 | sizeof(struct gs_host_frame), |
Nik Nyby | ae421e3 | 2015-06-29 19:09:57 -0400 | [diff] [blame] | 379 | gs_usb_receive_bulk_callback, |
Maximilian Schneider | d08e973 | 2013-12-24 19:29:45 +0000 | [diff] [blame] | 380 | usbcan |
| 381 | ); |
| 382 | |
| 383 | rc = usb_submit_urb(urb, GFP_ATOMIC); |
| 384 | |
| 385 | /* USB failure take down all interfaces */ |
| 386 | if (rc == -ENODEV) { |
| 387 | for (rc = 0; rc < GS_MAX_INTF; rc++) { |
| 388 | if (usbcan->canch[rc]) |
| 389 | netif_device_detach(usbcan->canch[rc]->netdev); |
| 390 | } |
| 391 | } |
| 392 | } |
| 393 | |
| 394 | static int gs_usb_set_bittiming(struct net_device *netdev) |
| 395 | { |
| 396 | struct gs_can *dev = netdev_priv(netdev); |
| 397 | struct can_bittiming *bt = &dev->can.bittiming; |
| 398 | struct usb_interface *intf = dev->iface; |
| 399 | int rc; |
| 400 | struct gs_device_bittiming *dbt; |
| 401 | |
| 402 | dbt = kmalloc(sizeof(*dbt), GFP_KERNEL); |
| 403 | if (!dbt) |
| 404 | return -ENOMEM; |
| 405 | |
| 406 | dbt->prop_seg = bt->prop_seg; |
| 407 | dbt->phase_seg1 = bt->phase_seg1; |
| 408 | dbt->phase_seg2 = bt->phase_seg2; |
| 409 | dbt->sjw = bt->sjw; |
| 410 | dbt->brp = bt->brp; |
| 411 | |
| 412 | /* request bit timings */ |
| 413 | rc = usb_control_msg(interface_to_usbdev(intf), |
| 414 | usb_sndctrlpipe(interface_to_usbdev(intf), 0), |
| 415 | GS_USB_BREQ_BITTIMING, |
| 416 | USB_DIR_OUT|USB_TYPE_VENDOR|USB_RECIP_INTERFACE, |
| 417 | dev->channel, |
| 418 | 0, |
| 419 | dbt, |
| 420 | sizeof(*dbt), |
| 421 | 1000); |
| 422 | |
| 423 | kfree(dbt); |
| 424 | |
| 425 | if (rc < 0) |
| 426 | dev_err(netdev->dev.parent, "Couldn't set bittimings (err=%d)", |
| 427 | rc); |
| 428 | |
| 429 | return rc; |
| 430 | } |
| 431 | |
| 432 | static void gs_usb_xmit_callback(struct urb *urb) |
| 433 | { |
| 434 | struct gs_tx_context *txc = urb->context; |
| 435 | struct gs_can *dev = txc->dev; |
| 436 | struct net_device *netdev = dev->netdev; |
| 437 | |
| 438 | if (urb->status) |
| 439 | netdev_info(netdev, "usb xmit fail %d\n", txc->echo_id); |
| 440 | |
| 441 | usb_free_coherent(urb->dev, |
| 442 | urb->transfer_buffer_length, |
| 443 | urb->transfer_buffer, |
| 444 | urb->transfer_dma); |
| 445 | |
| 446 | atomic_dec(&dev->active_tx_urbs); |
| 447 | |
| 448 | if (!netif_device_present(netdev)) |
| 449 | return; |
| 450 | |
| 451 | if (netif_queue_stopped(netdev)) |
| 452 | netif_wake_queue(netdev); |
| 453 | } |
| 454 | |
| 455 | static netdev_tx_t gs_can_start_xmit(struct sk_buff *skb, struct net_device *netdev) |
| 456 | { |
| 457 | struct gs_can *dev = netdev_priv(netdev); |
| 458 | struct net_device_stats *stats = &dev->netdev->stats; |
| 459 | struct urb *urb; |
| 460 | struct gs_host_frame *hf; |
| 461 | struct can_frame *cf; |
| 462 | int rc; |
| 463 | unsigned int idx; |
| 464 | struct gs_tx_context *txc; |
| 465 | |
| 466 | if (can_dropped_invalid_skb(netdev, skb)) |
| 467 | return NETDEV_TX_OK; |
| 468 | |
| 469 | /* find an empty context to keep track of transmission */ |
| 470 | txc = gs_alloc_tx_context(dev); |
| 471 | if (!txc) |
| 472 | return NETDEV_TX_BUSY; |
| 473 | |
| 474 | /* create a URB, and a buffer for it */ |
| 475 | urb = usb_alloc_urb(0, GFP_ATOMIC); |
| 476 | if (!urb) { |
| 477 | netdev_err(netdev, "No memory left for URB\n"); |
| 478 | goto nomem_urb; |
| 479 | } |
| 480 | |
| 481 | hf = usb_alloc_coherent(dev->udev, sizeof(*hf), GFP_ATOMIC, |
| 482 | &urb->transfer_dma); |
| 483 | if (!hf) { |
| 484 | netdev_err(netdev, "No memory left for USB buffer\n"); |
| 485 | goto nomem_hf; |
| 486 | } |
| 487 | |
| 488 | idx = txc->echo_id; |
| 489 | |
| 490 | if (idx >= GS_MAX_TX_URBS) { |
| 491 | netdev_err(netdev, "Invalid tx context %d\n", idx); |
| 492 | goto badidx; |
| 493 | } |
| 494 | |
| 495 | hf->echo_id = idx; |
| 496 | hf->channel = dev->channel; |
| 497 | |
| 498 | cf = (struct can_frame *)skb->data; |
| 499 | |
| 500 | hf->can_id = cf->can_id; |
| 501 | hf->can_dlc = cf->can_dlc; |
| 502 | memcpy(hf->data, cf->data, cf->can_dlc); |
| 503 | |
| 504 | usb_fill_bulk_urb(urb, dev->udev, |
| 505 | usb_sndbulkpipe(dev->udev, GSUSB_ENDPOINT_OUT), |
| 506 | hf, |
| 507 | sizeof(*hf), |
| 508 | gs_usb_xmit_callback, |
| 509 | txc); |
| 510 | |
| 511 | urb->transfer_flags |= URB_NO_TRANSFER_DMA_MAP; |
| 512 | usb_anchor_urb(urb, &dev->tx_submitted); |
| 513 | |
| 514 | can_put_echo_skb(skb, netdev, idx); |
| 515 | |
| 516 | atomic_inc(&dev->active_tx_urbs); |
| 517 | |
| 518 | rc = usb_submit_urb(urb, GFP_ATOMIC); |
| 519 | if (unlikely(rc)) { /* usb send failed */ |
| 520 | atomic_dec(&dev->active_tx_urbs); |
| 521 | |
| 522 | can_free_echo_skb(netdev, idx); |
| 523 | gs_free_tx_context(txc); |
| 524 | |
| 525 | usb_unanchor_urb(urb); |
| 526 | usb_free_coherent(dev->udev, |
| 527 | sizeof(*hf), |
| 528 | hf, |
| 529 | urb->transfer_dma); |
| 530 | |
| 531 | |
| 532 | if (rc == -ENODEV) { |
| 533 | netif_device_detach(netdev); |
| 534 | } else { |
| 535 | netdev_err(netdev, "usb_submit failed (err=%d)\n", rc); |
| 536 | stats->tx_dropped++; |
| 537 | } |
| 538 | } else { |
| 539 | /* Slow down tx path */ |
| 540 | if (atomic_read(&dev->active_tx_urbs) >= GS_MAX_TX_URBS) |
| 541 | netif_stop_queue(netdev); |
| 542 | } |
| 543 | |
| 544 | /* let usb core take care of this urb */ |
| 545 | usb_free_urb(urb); |
| 546 | |
| 547 | return NETDEV_TX_OK; |
| 548 | |
| 549 | badidx: |
| 550 | usb_free_coherent(dev->udev, |
| 551 | sizeof(*hf), |
| 552 | hf, |
| 553 | urb->transfer_dma); |
| 554 | nomem_hf: |
| 555 | usb_free_urb(urb); |
| 556 | |
| 557 | nomem_urb: |
| 558 | gs_free_tx_context(txc); |
| 559 | dev_kfree_skb(skb); |
| 560 | stats->tx_dropped++; |
| 561 | return NETDEV_TX_OK; |
| 562 | } |
| 563 | |
| 564 | static int gs_can_open(struct net_device *netdev) |
| 565 | { |
| 566 | struct gs_can *dev = netdev_priv(netdev); |
| 567 | struct gs_usb *parent = dev->parent; |
| 568 | int rc, i; |
| 569 | struct gs_device_mode *dm; |
| 570 | u32 ctrlmode; |
| 571 | |
| 572 | rc = open_candev(netdev); |
| 573 | if (rc) |
| 574 | return rc; |
| 575 | |
| 576 | if (atomic_add_return(1, &parent->active_channels) == 1) { |
| 577 | for (i = 0; i < GS_MAX_RX_URBS; i++) { |
| 578 | struct urb *urb; |
| 579 | u8 *buf; |
| 580 | |
| 581 | /* alloc rx urb */ |
| 582 | urb = usb_alloc_urb(0, GFP_KERNEL); |
| 583 | if (!urb) { |
| 584 | netdev_err(netdev, |
| 585 | "No memory left for URB\n"); |
| 586 | return -ENOMEM; |
| 587 | } |
| 588 | |
| 589 | /* alloc rx buffer */ |
| 590 | buf = usb_alloc_coherent(dev->udev, |
| 591 | sizeof(struct gs_host_frame), |
| 592 | GFP_KERNEL, |
| 593 | &urb->transfer_dma); |
| 594 | if (!buf) { |
| 595 | netdev_err(netdev, |
| 596 | "No memory left for USB buffer\n"); |
| 597 | usb_free_urb(urb); |
| 598 | return -ENOMEM; |
| 599 | } |
| 600 | |
| 601 | /* fill, anchor, and submit rx urb */ |
| 602 | usb_fill_bulk_urb(urb, |
| 603 | dev->udev, |
| 604 | usb_rcvbulkpipe(dev->udev, |
| 605 | GSUSB_ENDPOINT_IN), |
| 606 | buf, |
| 607 | sizeof(struct gs_host_frame), |
Nik Nyby | ae421e3 | 2015-06-29 19:09:57 -0400 | [diff] [blame] | 608 | gs_usb_receive_bulk_callback, |
Maximilian Schneider | d08e973 | 2013-12-24 19:29:45 +0000 | [diff] [blame] | 609 | parent); |
| 610 | urb->transfer_flags |= URB_NO_TRANSFER_DMA_MAP; |
| 611 | |
| 612 | usb_anchor_urb(urb, &parent->rx_submitted); |
| 613 | |
| 614 | rc = usb_submit_urb(urb, GFP_KERNEL); |
| 615 | if (rc) { |
| 616 | if (rc == -ENODEV) |
| 617 | netif_device_detach(dev->netdev); |
| 618 | |
| 619 | netdev_err(netdev, |
| 620 | "usb_submit failed (err=%d)\n", |
| 621 | rc); |
| 622 | |
| 623 | usb_unanchor_urb(urb); |
| 624 | break; |
| 625 | } |
| 626 | |
| 627 | /* Drop reference, |
| 628 | * USB core will take care of freeing it |
| 629 | */ |
| 630 | usb_free_urb(urb); |
| 631 | } |
| 632 | } |
| 633 | |
| 634 | dm = kmalloc(sizeof(*dm), GFP_KERNEL); |
| 635 | if (!dm) |
| 636 | return -ENOMEM; |
| 637 | |
| 638 | /* flags */ |
| 639 | ctrlmode = dev->can.ctrlmode; |
| 640 | dm->flags = 0; |
| 641 | |
| 642 | if (ctrlmode & CAN_CTRLMODE_LOOPBACK) |
| 643 | dm->flags |= GS_CAN_MODE_LOOP_BACK; |
| 644 | else if (ctrlmode & CAN_CTRLMODE_LISTENONLY) |
| 645 | dm->flags |= GS_CAN_MODE_LISTEN_ONLY; |
| 646 | |
| 647 | /* Controller is not allowed to retry TX |
| 648 | * this mode is unavailable on atmels uc3c hardware |
| 649 | */ |
| 650 | if (ctrlmode & CAN_CTRLMODE_ONE_SHOT) |
| 651 | dm->flags |= GS_CAN_MODE_ONE_SHOT; |
| 652 | |
| 653 | if (ctrlmode & CAN_CTRLMODE_3_SAMPLES) |
| 654 | dm->flags |= GS_CAN_MODE_TRIPLE_SAMPLE; |
| 655 | |
| 656 | /* finally start device */ |
| 657 | dm->mode = GS_CAN_MODE_START; |
| 658 | rc = usb_control_msg(interface_to_usbdev(dev->iface), |
| 659 | usb_sndctrlpipe(interface_to_usbdev(dev->iface), 0), |
| 660 | GS_USB_BREQ_MODE, |
| 661 | USB_DIR_OUT|USB_TYPE_VENDOR|USB_RECIP_INTERFACE, |
| 662 | dev->channel, |
| 663 | 0, |
| 664 | dm, |
| 665 | sizeof(*dm), |
| 666 | 1000); |
| 667 | |
| 668 | if (rc < 0) { |
| 669 | netdev_err(netdev, "Couldn't start device (err=%d)\n", rc); |
| 670 | kfree(dm); |
| 671 | return rc; |
| 672 | } |
| 673 | |
| 674 | kfree(dm); |
| 675 | |
| 676 | dev->can.state = CAN_STATE_ERROR_ACTIVE; |
| 677 | |
| 678 | if (!(dev->can.ctrlmode & CAN_CTRLMODE_LISTENONLY)) |
| 679 | netif_start_queue(netdev); |
| 680 | |
| 681 | return 0; |
| 682 | } |
| 683 | |
| 684 | static int gs_can_close(struct net_device *netdev) |
| 685 | { |
| 686 | int rc; |
| 687 | struct gs_can *dev = netdev_priv(netdev); |
| 688 | struct gs_usb *parent = dev->parent; |
| 689 | |
| 690 | netif_stop_queue(netdev); |
| 691 | |
| 692 | /* Stop polling */ |
| 693 | if (atomic_dec_and_test(&parent->active_channels)) |
| 694 | usb_kill_anchored_urbs(&parent->rx_submitted); |
| 695 | |
| 696 | /* Stop sending URBs */ |
| 697 | usb_kill_anchored_urbs(&dev->tx_submitted); |
| 698 | atomic_set(&dev->active_tx_urbs, 0); |
| 699 | |
| 700 | /* reset the device */ |
| 701 | rc = gs_cmd_reset(parent, dev); |
| 702 | if (rc < 0) |
| 703 | netdev_warn(netdev, "Couldn't shutdown device (err=%d)", rc); |
| 704 | |
| 705 | /* reset tx contexts */ |
| 706 | for (rc = 0; rc < GS_MAX_TX_URBS; rc++) { |
| 707 | dev->tx_context[rc].dev = dev; |
| 708 | dev->tx_context[rc].echo_id = GS_MAX_TX_URBS; |
| 709 | } |
| 710 | |
| 711 | /* close the netdev */ |
| 712 | close_candev(netdev); |
| 713 | |
| 714 | return 0; |
| 715 | } |
| 716 | |
| 717 | static const struct net_device_ops gs_usb_netdev_ops = { |
| 718 | .ndo_open = gs_can_open, |
| 719 | .ndo_stop = gs_can_close, |
| 720 | .ndo_start_xmit = gs_can_start_xmit, |
Marc Kleine-Budde | 50212b4 | 2014-11-18 13:16:13 +0100 | [diff] [blame] | 721 | .ndo_change_mtu = can_change_mtu, |
Maximilian Schneider | d08e973 | 2013-12-24 19:29:45 +0000 | [diff] [blame] | 722 | }; |
| 723 | |
| 724 | static struct gs_can *gs_make_candev(unsigned int channel, struct usb_interface *intf) |
| 725 | { |
| 726 | struct gs_can *dev; |
| 727 | struct net_device *netdev; |
| 728 | int rc; |
| 729 | struct gs_device_bt_const *bt_const; |
| 730 | |
| 731 | bt_const = kmalloc(sizeof(*bt_const), GFP_KERNEL); |
| 732 | if (!bt_const) |
| 733 | return ERR_PTR(-ENOMEM); |
| 734 | |
| 735 | /* fetch bit timing constants */ |
| 736 | rc = usb_control_msg(interface_to_usbdev(intf), |
| 737 | usb_rcvctrlpipe(interface_to_usbdev(intf), 0), |
| 738 | GS_USB_BREQ_BT_CONST, |
| 739 | USB_DIR_IN|USB_TYPE_VENDOR|USB_RECIP_INTERFACE, |
| 740 | channel, |
| 741 | 0, |
| 742 | bt_const, |
| 743 | sizeof(*bt_const), |
| 744 | 1000); |
| 745 | |
| 746 | if (rc < 0) { |
| 747 | dev_err(&intf->dev, |
| 748 | "Couldn't get bit timing const for channel (err=%d)\n", |
| 749 | rc); |
| 750 | kfree(bt_const); |
| 751 | return ERR_PTR(rc); |
| 752 | } |
| 753 | |
| 754 | /* create netdev */ |
| 755 | netdev = alloc_candev(sizeof(struct gs_can), GS_MAX_TX_URBS); |
| 756 | if (!netdev) { |
| 757 | dev_err(&intf->dev, "Couldn't allocate candev\n"); |
| 758 | kfree(bt_const); |
| 759 | return ERR_PTR(-ENOMEM); |
| 760 | } |
| 761 | |
| 762 | dev = netdev_priv(netdev); |
| 763 | |
| 764 | netdev->netdev_ops = &gs_usb_netdev_ops; |
| 765 | |
| 766 | netdev->flags |= IFF_ECHO; /* we support full roundtrip echo */ |
| 767 | |
| 768 | /* dev settup */ |
| 769 | strcpy(dev->bt_const.name, "gs_usb"); |
| 770 | dev->bt_const.tseg1_min = bt_const->tseg1_min; |
| 771 | dev->bt_const.tseg1_max = bt_const->tseg1_max; |
| 772 | dev->bt_const.tseg2_min = bt_const->tseg2_min; |
| 773 | dev->bt_const.tseg2_max = bt_const->tseg2_max; |
| 774 | dev->bt_const.sjw_max = bt_const->sjw_max; |
| 775 | dev->bt_const.brp_min = bt_const->brp_min; |
| 776 | dev->bt_const.brp_max = bt_const->brp_max; |
| 777 | dev->bt_const.brp_inc = bt_const->brp_inc; |
| 778 | |
| 779 | dev->udev = interface_to_usbdev(intf); |
| 780 | dev->iface = intf; |
| 781 | dev->netdev = netdev; |
| 782 | dev->channel = channel; |
| 783 | |
| 784 | init_usb_anchor(&dev->tx_submitted); |
| 785 | atomic_set(&dev->active_tx_urbs, 0); |
| 786 | spin_lock_init(&dev->tx_ctx_lock); |
| 787 | for (rc = 0; rc < GS_MAX_TX_URBS; rc++) { |
| 788 | dev->tx_context[rc].dev = dev; |
| 789 | dev->tx_context[rc].echo_id = GS_MAX_TX_URBS; |
| 790 | } |
| 791 | |
| 792 | /* can settup */ |
| 793 | dev->can.state = CAN_STATE_STOPPED; |
| 794 | dev->can.clock.freq = bt_const->fclk_can; |
| 795 | dev->can.bittiming_const = &dev->bt_const; |
| 796 | dev->can.do_set_bittiming = gs_usb_set_bittiming; |
| 797 | |
| 798 | dev->can.ctrlmode_supported = 0; |
| 799 | |
| 800 | if (bt_const->feature & GS_CAN_FEATURE_LISTEN_ONLY) |
| 801 | dev->can.ctrlmode_supported |= CAN_CTRLMODE_LISTENONLY; |
| 802 | |
| 803 | if (bt_const->feature & GS_CAN_FEATURE_LOOP_BACK) |
| 804 | dev->can.ctrlmode_supported |= CAN_CTRLMODE_LOOPBACK; |
| 805 | |
| 806 | if (bt_const->feature & GS_CAN_FEATURE_TRIPLE_SAMPLE) |
| 807 | dev->can.ctrlmode_supported |= CAN_CTRLMODE_3_SAMPLES; |
| 808 | |
| 809 | if (bt_const->feature & GS_CAN_FEATURE_ONE_SHOT) |
| 810 | dev->can.ctrlmode_supported |= CAN_CTRLMODE_ONE_SHOT; |
| 811 | |
| 812 | kfree(bt_const); |
| 813 | |
| 814 | SET_NETDEV_DEV(netdev, &intf->dev); |
| 815 | |
| 816 | rc = register_candev(dev->netdev); |
| 817 | if (rc) { |
| 818 | free_candev(dev->netdev); |
| 819 | dev_err(&intf->dev, "Couldn't register candev (err=%d)\n", rc); |
| 820 | return ERR_PTR(rc); |
| 821 | } |
| 822 | |
| 823 | return dev; |
| 824 | } |
| 825 | |
| 826 | static void gs_destroy_candev(struct gs_can *dev) |
| 827 | { |
| 828 | unregister_candev(dev->netdev); |
| 829 | free_candev(dev->netdev); |
Maximilian Schneider | d08e973 | 2013-12-24 19:29:45 +0000 | [diff] [blame] | 830 | usb_kill_anchored_urbs(&dev->tx_submitted); |
Marc Kleine-Budde | cf68f51 | 2014-05-21 10:06:02 +0200 | [diff] [blame] | 831 | kfree(dev); |
Maximilian Schneider | d08e973 | 2013-12-24 19:29:45 +0000 | [diff] [blame] | 832 | } |
| 833 | |
| 834 | static int gs_usb_probe(struct usb_interface *intf, const struct usb_device_id *id) |
| 835 | { |
| 836 | struct gs_usb *dev; |
| 837 | int rc = -ENOMEM; |
| 838 | unsigned int icount, i; |
| 839 | struct gs_host_config *hconf; |
| 840 | struct gs_device_config *dconf; |
| 841 | |
| 842 | hconf = kmalloc(sizeof(*hconf), GFP_KERNEL); |
| 843 | if (!hconf) |
| 844 | return -ENOMEM; |
| 845 | |
| 846 | hconf->byte_order = 0x0000beef; |
| 847 | |
| 848 | /* send host config */ |
| 849 | rc = usb_control_msg(interface_to_usbdev(intf), |
| 850 | usb_sndctrlpipe(interface_to_usbdev(intf), 0), |
| 851 | GS_USB_BREQ_HOST_FORMAT, |
| 852 | USB_DIR_OUT|USB_TYPE_VENDOR|USB_RECIP_INTERFACE, |
| 853 | 1, |
| 854 | intf->altsetting[0].desc.bInterfaceNumber, |
| 855 | hconf, |
| 856 | sizeof(*hconf), |
| 857 | 1000); |
| 858 | |
| 859 | kfree(hconf); |
| 860 | |
| 861 | if (rc < 0) { |
| 862 | dev_err(&intf->dev, "Couldn't send data format (err=%d)\n", |
| 863 | rc); |
| 864 | return rc; |
| 865 | } |
| 866 | |
| 867 | dconf = kmalloc(sizeof(*dconf), GFP_KERNEL); |
| 868 | if (!dconf) |
| 869 | return -ENOMEM; |
| 870 | |
| 871 | /* read device config */ |
| 872 | rc = usb_control_msg(interface_to_usbdev(intf), |
| 873 | usb_rcvctrlpipe(interface_to_usbdev(intf), 0), |
| 874 | GS_USB_BREQ_DEVICE_CONFIG, |
| 875 | USB_DIR_IN|USB_TYPE_VENDOR|USB_RECIP_INTERFACE, |
| 876 | 1, |
| 877 | intf->altsetting[0].desc.bInterfaceNumber, |
| 878 | dconf, |
| 879 | sizeof(*dconf), |
| 880 | 1000); |
| 881 | if (rc < 0) { |
| 882 | dev_err(&intf->dev, "Couldn't get device config: (err=%d)\n", |
| 883 | rc); |
| 884 | |
| 885 | kfree(dconf); |
| 886 | |
| 887 | return rc; |
| 888 | } |
| 889 | |
| 890 | icount = dconf->icount+1; |
| 891 | |
| 892 | kfree(dconf); |
| 893 | |
| 894 | dev_info(&intf->dev, "Configuring for %d interfaces\n", icount); |
| 895 | |
| 896 | if (icount > GS_MAX_INTF) { |
| 897 | dev_err(&intf->dev, |
| 898 | "Driver cannot handle more that %d CAN interfaces\n", |
| 899 | GS_MAX_INTF); |
| 900 | return -EINVAL; |
| 901 | } |
| 902 | |
| 903 | dev = kzalloc(sizeof(*dev), GFP_KERNEL); |
Colin Ian King | 37920a7 | 2015-03-16 22:42:24 +0000 | [diff] [blame] | 904 | if (!dev) |
| 905 | return -ENOMEM; |
Maximilian Schneider | d08e973 | 2013-12-24 19:29:45 +0000 | [diff] [blame] | 906 | init_usb_anchor(&dev->rx_submitted); |
| 907 | |
| 908 | atomic_set(&dev->active_channels, 0); |
| 909 | |
| 910 | usb_set_intfdata(intf, dev); |
| 911 | dev->udev = interface_to_usbdev(intf); |
| 912 | |
| 913 | for (i = 0; i < icount; i++) { |
| 914 | dev->canch[i] = gs_make_candev(i, intf); |
| 915 | if (IS_ERR_OR_NULL(dev->canch[i])) { |
| 916 | /* on failure destroy previously created candevs */ |
| 917 | icount = i; |
| 918 | for (i = 0; i < icount; i++) { |
| 919 | gs_destroy_candev(dev->canch[i]); |
| 920 | dev->canch[i] = NULL; |
| 921 | } |
| 922 | kfree(dev); |
| 923 | return rc; |
| 924 | } |
| 925 | dev->canch[i]->parent = dev; |
| 926 | } |
| 927 | |
| 928 | return 0; |
| 929 | } |
| 930 | |
| 931 | static void gs_usb_disconnect(struct usb_interface *intf) |
| 932 | { |
| 933 | unsigned i; |
| 934 | struct gs_usb *dev = usb_get_intfdata(intf); |
| 935 | usb_set_intfdata(intf, NULL); |
| 936 | |
| 937 | if (!dev) { |
| 938 | dev_err(&intf->dev, "Disconnect (nodata)\n"); |
| 939 | return; |
| 940 | } |
| 941 | |
| 942 | for (i = 0; i < GS_MAX_INTF; i++) { |
| 943 | struct gs_can *can = dev->canch[i]; |
| 944 | |
| 945 | if (!can) |
| 946 | continue; |
| 947 | |
| 948 | gs_destroy_candev(can); |
| 949 | } |
| 950 | |
| 951 | usb_kill_anchored_urbs(&dev->rx_submitted); |
| 952 | } |
| 953 | |
| 954 | static const struct usb_device_id gs_usb_table[] = { |
| 955 | {USB_DEVICE(USB_GSUSB_1_VENDOR_ID, USB_GSUSB_1_PRODUCT_ID)}, |
| 956 | {} /* Terminating entry */ |
| 957 | }; |
| 958 | |
| 959 | MODULE_DEVICE_TABLE(usb, gs_usb_table); |
| 960 | |
| 961 | static struct usb_driver gs_usb_driver = { |
| 962 | .name = "gs_usb", |
| 963 | .probe = gs_usb_probe, |
| 964 | .disconnect = gs_usb_disconnect, |
| 965 | .id_table = gs_usb_table, |
| 966 | }; |
| 967 | |
| 968 | module_usb_driver(gs_usb_driver); |
| 969 | |
| 970 | MODULE_AUTHOR("Maximilian Schneider <mws@schneidersoft.net>"); |
| 971 | MODULE_DESCRIPTION( |
| 972 | "Socket CAN device driver for Geschwister Schneider Technologie-, " |
| 973 | "Entwicklungs- und Vertriebs UG. USB2.0 to CAN interfaces."); |
| 974 | MODULE_LICENSE("GPL v2"); |