arch/sh/boards/of-generic.c

/*
 * SH generic board support, using device tree
 *
 * Copyright (C) 2015-2016 Smart Energy Instruments, Inc.
 *
 * This file is subject to the terms and conditions of the GNU General Public
 * License.  See the file "COPYING" in the main directory of this archive
 * for more details.
 */

#include <linux/of.h>
#include <linux/of_platform.h>
#include <linux/of_fdt.h>
#include <linux/of_iommu.h>
#include <linux/clocksource.h>
#include <linux/irqchip.h>
#include <linux/clk-provider.h>
#include <asm/machvec.h>
#include <asm/rtc.h>

#ifdef CONFIG_SMP

static void dummy_smp_setup(void)
{
}

static void dummy_prepare_cpus(unsigned int max_cpus)
{
}

static void dummy_start_cpu(unsigned int cpu, unsigned long entry_point)
{
}

static unsigned int dummy_smp_processor_id(void)
{
	return 0;
}

static void dummy_send_ipi(unsigned int cpu, unsigned int message)
{
}

static struct plat_smp_ops dummy_smp_ops = {
	.smp_setup		= dummy_smp_setup,
	.prepare_cpus		= dummy_prepare_cpus,
	.start_cpu		= dummy_start_cpu,
	.smp_processor_id	= dummy_smp_processor_id,
	.send_ipi		= dummy_send_ipi,
	.cpu_die		= native_cpu_die,
	.cpu_disable		= native_cpu_disable,
	.play_dead		= native_play_dead,
};

extern const struct of_cpu_method __cpu_method_of_table[];
const struct of_cpu_method __cpu_method_of_table_sentinel
	__section(__cpu_method_of_table_end);

static void sh_of_smp_probe(void)
{
	struct device_node *np = 0;
	const char *method = 0;
	const struct of_cpu_method *m = __cpu_method_of_table;

	pr_info("SH generic board support: scanning for cpus\n");

	init_cpu_possible(cpumask_of(0));

	while ((np = of_find_node_by_type(np, "cpu"))) {
		const __be32 *cell = of_get_property(np, "reg", NULL);
		u64 id = -1;
		if (cell) id = of_read_number(cell, of_n_addr_cells(np));
		if (id < NR_CPUS) {
			if (!method)
				of_property_read_string(np, "enable-method", &method);
			set_cpu_possible(id, true);
			set_cpu_present(id, true);
			__cpu_number_map[id] = id;
			__cpu_logical_map[id] = id;
		}
	}
	if (!method) {
		np = of_find_node_by_name(NULL, "cpus");
		of_property_read_string(np, "enable-method", &method);
	}

	pr_info("CPU enable method: %s\n", method);
	if (method)
		for (; m->method; m++)
			if (!strcmp(m->method, method)) {
				register_smp_ops(m->ops);
				return;
			}

	register_smp_ops(&dummy_smp_ops);
}

#else

static void sh_of_smp_probe(void)
{
}

#endif

static void noop(void)
{
}

static int noopi(void)
{
	return 0;
}

static void __init sh_of_mem_reserve(void)
{
	early_init_fdt_reserve_self();
	early_init_fdt_scan_reserved_mem();
}

static void __init sh_of_time_init(void)
{
	pr_info("SH generic board support: scanning for clocksource devices\n");
	clocksource_probe();
}

static void __init sh_of_setup(char **cmdline_p)
{
	unflatten_device_tree();

	board_time_init = sh_of_time_init;

	sh_mv.mv_name = of_flat_dt_get_machine_name();
	if (!sh_mv.mv_name)
		sh_mv.mv_name = "Unknown SH model";

	sh_of_smp_probe();
}

static int sh_of_irq_demux(int irq)
{
	/* FIXME: eventually this should not be used at all;
	 * the interrupt controller should set_handle_irq(). */
	return irq;
}

static void __init sh_of_init_irq(void)
{
	pr_info("SH generic board support: scanning for interrupt controllers\n");
	irqchip_init();
}

static int __init sh_of_clk_init(void)
{
#ifdef CONFIG_COMMON_CLK
	/* Disabled pending move to COMMON_CLK framework. */
	pr_info("SH generic board support: scanning for clk providers\n");
	of_clk_init(NULL);
#endif
	return 0;
}

static struct sh_machine_vector __initmv sh_of_generic_mv = {
	.mv_setup	= sh_of_setup,
	.mv_name	= "devicetree", /* replaced by DT root's model */
	.mv_irq_demux	= sh_of_irq_demux,
	.mv_init_irq	= sh_of_init_irq,
	.mv_clk_init	= sh_of_clk_init,
	.mv_mode_pins	= noopi,
	.mv_mem_init	= noop,
	.mv_mem_reserve	= sh_of_mem_reserve,
};

struct sh_clk_ops;

void __init arch_init_clk_ops(struct sh_clk_ops **ops, int idx)
{
}

void __init plat_irq_setup(void)
{
}

static int __init sh_of_device_init(void)
{
	pr_info("SH generic board support: populating platform devices\n");
	if (of_have_populated_dt()) {
		of_iommu_init();
		of_platform_populate(NULL, of_default_bus_match_table,
				     NULL, NULL);
	} else {
		pr_crit("Device tree not populated\n");
	}
	return 0;
}
arch_initcall_sync(sh_of_device_init);