Javier Martinez Canillas | 6c6000c | 2015-09-30 15:53:55 +0900 | [diff] [blame] | 1 | /* |
| 2 | * Google Snow board device tree source |
| 3 | * |
| 4 | * Copyright (c) 2012 Google, Inc |
| 5 | * |
| 6 | * This program is free software; you can redistribute it and/or modify |
| 7 | * it under the terms of the GNU General Public License version 2 as |
| 8 | * published by the Free Software Foundation. |
| 9 | */ |
| 10 | |
| 11 | #include <dt-bindings/gpio/gpio.h> |
| 12 | #include <dt-bindings/clock/maxim,max77686.h> |
| 13 | #include <dt-bindings/interrupt-controller/irq.h> |
| 14 | #include <dt-bindings/input/input.h> |
| 15 | #include "exynos5250.dtsi" |
| 16 | |
| 17 | / { |
| 18 | aliases { |
| 19 | i2c104 = &i2c_104; |
| 20 | }; |
| 21 | |
| 22 | memory { |
| 23 | reg = <0x40000000 0x80000000>; |
| 24 | }; |
| 25 | |
| 26 | chosen { |
| 27 | bootargs = "console=tty1"; |
| 28 | stdout-path = "serial3:115200n8"; |
| 29 | }; |
| 30 | |
| 31 | gpio-keys { |
| 32 | compatible = "gpio-keys"; |
| 33 | pinctrl-names = "default"; |
| 34 | pinctrl-0 = <&power_key_irq &lid_irq>; |
| 35 | |
| 36 | power { |
| 37 | label = "Power"; |
| 38 | gpios = <&gpx1 3 GPIO_ACTIVE_LOW>; |
| 39 | linux,code = <KEY_POWER>; |
| 40 | gpio-key,wakeup; |
| 41 | }; |
| 42 | |
| 43 | lid-switch { |
| 44 | label = "Lid"; |
| 45 | gpios = <&gpx3 5 GPIO_ACTIVE_LOW>; |
| 46 | linux,input-type = <5>; /* EV_SW */ |
| 47 | linux,code = <0>; /* SW_LID */ |
| 48 | debounce-interval = <1>; |
| 49 | gpio-key,wakeup; |
| 50 | }; |
| 51 | }; |
| 52 | |
| 53 | vbat: vbat-fixed-regulator { |
| 54 | compatible = "regulator-fixed"; |
| 55 | regulator-name = "vbat-supply"; |
| 56 | regulator-boot-on; |
| 57 | }; |
| 58 | |
| 59 | i2c-arbitrator { |
| 60 | compatible = "i2c-arb-gpio-challenge"; |
| 61 | #address-cells = <1>; |
| 62 | #size-cells = <0>; |
| 63 | |
| 64 | i2c-parent = <&{/i2c@12CA0000}>; |
| 65 | |
| 66 | our-claim-gpio = <&gpf0 3 GPIO_ACTIVE_LOW>; |
| 67 | their-claim-gpios = <&gpe0 4 GPIO_ACTIVE_LOW>; |
| 68 | slew-delay-us = <10>; |
| 69 | wait-retry-us = <3000>; |
| 70 | wait-free-us = <50000>; |
| 71 | |
| 72 | pinctrl-names = "default"; |
| 73 | pinctrl-0 = <&arb_our_claim &arb_their_claim>; |
| 74 | |
| 75 | /* Use ID 104 as a hint that we're on physical bus 4 */ |
| 76 | i2c_104: i2c@0 { |
| 77 | reg = <0>; |
| 78 | #address-cells = <1>; |
| 79 | #size-cells = <0>; |
| 80 | |
| 81 | battery: sbs-battery@b { |
| 82 | compatible = "sbs,sbs-battery"; |
| 83 | reg = <0xb>; |
| 84 | sbs,poll-retry-count = <1>; |
| 85 | }; |
| 86 | |
| 87 | cros_ec: embedded-controller { |
| 88 | compatible = "google,cros-ec-i2c"; |
| 89 | reg = <0x1e>; |
| 90 | interrupts = <6 IRQ_TYPE_NONE>; |
| 91 | interrupt-parent = <&gpx1>; |
| 92 | pinctrl-names = "default"; |
| 93 | pinctrl-0 = <&ec_irq>; |
| 94 | wakeup-source; |
| 95 | }; |
| 96 | |
| 97 | power-regulator { |
| 98 | compatible = "ti,tps65090"; |
| 99 | reg = <0x48>; |
| 100 | |
| 101 | /* |
| 102 | * Config irq to disable internal pulls |
| 103 | * even though we run in polling mode. |
| 104 | */ |
| 105 | pinctrl-names = "default"; |
| 106 | pinctrl-0 = <&tps65090_irq>; |
| 107 | |
| 108 | vsys1-supply = <&vbat>; |
| 109 | vsys2-supply = <&vbat>; |
| 110 | vsys3-supply = <&vbat>; |
| 111 | infet1-supply = <&vbat>; |
| 112 | infet2-supply = <&vbat>; |
| 113 | infet3-supply = <&vbat>; |
| 114 | infet4-supply = <&vbat>; |
| 115 | infet5-supply = <&vbat>; |
| 116 | infet6-supply = <&vbat>; |
| 117 | infet7-supply = <&vbat>; |
| 118 | vsys-l1-supply = <&vbat>; |
| 119 | vsys-l2-supply = <&vbat>; |
| 120 | |
| 121 | regulators { |
| 122 | dcdc1 { |
| 123 | ti,enable-ext-control; |
| 124 | }; |
| 125 | dcdc2 { |
| 126 | ti,enable-ext-control; |
| 127 | }; |
| 128 | dcdc3 { |
| 129 | ti,enable-ext-control; |
| 130 | }; |
| 131 | fet1: fet1 { |
| 132 | regulator-name = "vcd_led"; |
| 133 | ti,overcurrent-wait = <3>; |
| 134 | }; |
| 135 | tps65090_fet2: fet2 { |
| 136 | regulator-name = "video_mid"; |
| 137 | regulator-always-on; |
| 138 | ti,overcurrent-wait = <3>; |
| 139 | }; |
| 140 | fet3 { |
| 141 | regulator-name = "wwan_r"; |
| 142 | regulator-always-on; |
| 143 | ti,overcurrent-wait = <3>; |
| 144 | }; |
| 145 | fet4 { |
| 146 | regulator-name = "sdcard"; |
| 147 | ti,overcurrent-wait = <3>; |
| 148 | }; |
| 149 | fet5 { |
| 150 | regulator-name = "camout"; |
| 151 | regulator-always-on; |
| 152 | ti,overcurrent-wait = <3>; |
| 153 | }; |
| 154 | fet6: fet6 { |
| 155 | regulator-name = "lcd_vdd"; |
| 156 | ti,overcurrent-wait = <3>; |
| 157 | }; |
| 158 | tps65090_fet7: fet7 { |
| 159 | regulator-name = "video_mid_1a"; |
| 160 | regulator-always-on; |
| 161 | ti,overcurrent-wait = <3>; |
| 162 | }; |
| 163 | ldo1 { |
| 164 | }; |
| 165 | ldo2 { |
| 166 | }; |
| 167 | }; |
| 168 | |
| 169 | charger { |
| 170 | compatible = "ti,tps65090-charger"; |
| 171 | }; |
| 172 | }; |
| 173 | }; |
| 174 | }; |
| 175 | |
| 176 | sound { |
| 177 | samsung,i2s-controller = <&i2s0>; |
| 178 | }; |
| 179 | |
| 180 | usb3_vbus_reg: regulator-usb3 { |
| 181 | compatible = "regulator-fixed"; |
| 182 | regulator-name = "P5.0V_USB3CON"; |
| 183 | regulator-min-microvolt = <5000000>; |
| 184 | regulator-max-microvolt = <5000000>; |
| 185 | gpio = <&gpx2 7 GPIO_ACTIVE_HIGH>; |
| 186 | pinctrl-names = "default"; |
| 187 | pinctrl-0 = <&usb3_vbus_en>; |
| 188 | enable-active-high; |
| 189 | }; |
| 190 | |
| 191 | fixed-rate-clocks { |
| 192 | xxti { |
| 193 | compatible = "samsung,clock-xxti"; |
| 194 | clock-frequency = <24000000>; |
| 195 | }; |
| 196 | }; |
| 197 | |
| 198 | backlight: backlight { |
| 199 | compatible = "pwm-backlight"; |
| 200 | pwms = <&pwm 0 1000000 0>; |
| 201 | brightness-levels = <0 100 500 1000 1500 2000 2500 2800>; |
| 202 | default-brightness-level = <7>; |
| 203 | enable-gpios = <&gpx3 0 GPIO_ACTIVE_HIGH>; |
| 204 | power-supply = <&fet1>; |
| 205 | pinctrl-0 = <&pwm0_out>; |
| 206 | pinctrl-names = "default"; |
| 207 | }; |
| 208 | |
| 209 | panel: panel { |
| 210 | compatible = "auo,b116xw03"; |
| 211 | power-supply = <&fet6>; |
| 212 | backlight = <&backlight>; |
| 213 | |
| 214 | port { |
| 215 | panel_in: endpoint { |
| 216 | remote-endpoint = <&bridge_out>; |
| 217 | }; |
| 218 | }; |
| 219 | }; |
| 220 | |
| 221 | mmc3_pwrseq: mmc3_pwrseq { |
| 222 | compatible = "mmc-pwrseq-simple"; |
| 223 | reset-gpios = <&gpx0 2 GPIO_ACTIVE_LOW>, /* WIFI_RSTn */ |
| 224 | <&gpx0 1 GPIO_ACTIVE_LOW>; /* WIFI_EN */ |
| 225 | clocks = <&max77686 MAX77686_CLK_PMIC>; |
| 226 | clock-names = "ext_clock"; |
| 227 | }; |
| 228 | }; |
| 229 | |
| 230 | &cpu0 { |
| 231 | cpu0-supply = <&buck2_reg>; |
| 232 | }; |
| 233 | |
| 234 | &dp { |
| 235 | status = "okay"; |
| 236 | pinctrl-names = "default"; |
| 237 | pinctrl-0 = <&dp_hpd>; |
| 238 | samsung,color-space = <0>; |
| 239 | samsung,dynamic-range = <0>; |
| 240 | samsung,ycbcr-coeff = <0>; |
| 241 | samsung,color-depth = <1>; |
| 242 | samsung,link-rate = <0x0a>; |
| 243 | samsung,lane-count = <2>; |
| 244 | samsung,hpd-gpio = <&gpx0 7 GPIO_ACTIVE_HIGH>; |
| 245 | |
| 246 | ports { |
| 247 | port@0 { |
| 248 | dp_out: endpoint { |
| 249 | remote-endpoint = <&bridge_in>; |
| 250 | }; |
| 251 | }; |
| 252 | }; |
| 253 | }; |
| 254 | |
| 255 | &ehci { |
| 256 | samsung,vbus-gpio = <&gpx1 1 GPIO_ACTIVE_HIGH>; |
| 257 | }; |
| 258 | |
| 259 | &fimd { |
| 260 | status = "okay"; |
| 261 | samsung,invert-vclk; |
| 262 | }; |
| 263 | |
| 264 | &hdmi { |
| 265 | hpd-gpio = <&gpx3 7 GPIO_ACTIVE_HIGH>; |
| 266 | pinctrl-names = "default"; |
| 267 | pinctrl-0 = <&hdmi_hpd_irq>; |
| 268 | phy = <&hdmiphy>; |
| 269 | ddc = <&i2c_2>; |
| 270 | hdmi-en-supply = <&tps65090_fet7>; |
| 271 | vdd-supply = <&ldo8_reg>; |
| 272 | vdd_osc-supply = <&ldo10_reg>; |
| 273 | vdd_pll-supply = <&ldo8_reg>; |
| 274 | }; |
| 275 | |
| 276 | &i2c_0 { |
| 277 | status = "okay"; |
| 278 | samsung,i2c-sda-delay = <100>; |
| 279 | samsung,i2c-max-bus-freq = <378000>; |
| 280 | |
| 281 | max77686: max77686@09 { |
| 282 | compatible = "maxim,max77686"; |
| 283 | interrupt-parent = <&gpx3>; |
| 284 | interrupts = <2 IRQ_TYPE_NONE>; |
| 285 | pinctrl-names = "default"; |
| 286 | pinctrl-0 = <&max77686_irq>; |
| 287 | wakeup-source; |
| 288 | reg = <0x09>; |
| 289 | #clock-cells = <1>; |
| 290 | |
| 291 | voltage-regulators { |
| 292 | ldo1_reg: LDO1 { |
| 293 | regulator-name = "P1.0V_LDO_OUT1"; |
| 294 | regulator-min-microvolt = <1000000>; |
| 295 | regulator-max-microvolt = <1000000>; |
| 296 | regulator-always-on; |
| 297 | }; |
| 298 | |
| 299 | ldo2_reg: LDO2 { |
| 300 | regulator-name = "P1.8V_LDO_OUT2"; |
| 301 | regulator-min-microvolt = <1800000>; |
| 302 | regulator-max-microvolt = <1800000>; |
| 303 | regulator-always-on; |
| 304 | }; |
| 305 | |
| 306 | ldo3_reg: LDO3 { |
| 307 | regulator-name = "P1.8V_LDO_OUT3"; |
| 308 | regulator-min-microvolt = <1800000>; |
| 309 | regulator-max-microvolt = <1800000>; |
| 310 | regulator-always-on; |
| 311 | }; |
| 312 | |
| 313 | ldo7_reg: LDO7 { |
| 314 | regulator-name = "P1.1V_LDO_OUT7"; |
| 315 | regulator-min-microvolt = <1100000>; |
| 316 | regulator-max-microvolt = <1100000>; |
| 317 | regulator-always-on; |
| 318 | }; |
| 319 | |
| 320 | ldo8_reg: LDO8 { |
| 321 | regulator-name = "P1.0V_LDO_OUT8"; |
| 322 | regulator-min-microvolt = <1000000>; |
| 323 | regulator-max-microvolt = <1000000>; |
| 324 | regulator-always-on; |
| 325 | }; |
| 326 | |
| 327 | ldo10_reg: LDO10 { |
| 328 | regulator-name = "P1.8V_LDO_OUT10"; |
| 329 | regulator-min-microvolt = <1800000>; |
| 330 | regulator-max-microvolt = <1800000>; |
| 331 | regulator-always-on; |
| 332 | }; |
| 333 | |
| 334 | ldo12_reg: LDO12 { |
| 335 | regulator-name = "P3.0V_LDO_OUT12"; |
| 336 | regulator-min-microvolt = <3000000>; |
| 337 | regulator-max-microvolt = <3000000>; |
| 338 | regulator-always-on; |
| 339 | }; |
| 340 | |
| 341 | ldo14_reg: LDO14 { |
| 342 | regulator-name = "P1.8V_LDO_OUT14"; |
| 343 | regulator-min-microvolt = <1800000>; |
| 344 | regulator-max-microvolt = <1800000>; |
| 345 | regulator-always-on; |
| 346 | }; |
| 347 | |
| 348 | ldo15_reg: LDO15 { |
| 349 | regulator-name = "P1.0V_LDO_OUT15"; |
| 350 | regulator-min-microvolt = <1000000>; |
| 351 | regulator-max-microvolt = <1000000>; |
| 352 | regulator-always-on; |
| 353 | }; |
| 354 | |
| 355 | ldo16_reg: LDO16 { |
| 356 | regulator-name = "P1.8V_LDO_OUT16"; |
| 357 | regulator-min-microvolt = <1800000>; |
| 358 | regulator-max-microvolt = <1800000>; |
| 359 | regulator-always-on; |
| 360 | }; |
| 361 | |
| 362 | buck1_reg: BUCK1 { |
| 363 | regulator-name = "vdd_mif"; |
| 364 | regulator-min-microvolt = <950000>; |
| 365 | regulator-max-microvolt = <1300000>; |
| 366 | regulator-always-on; |
| 367 | regulator-boot-on; |
| 368 | }; |
| 369 | |
| 370 | buck2_reg: BUCK2 { |
| 371 | regulator-name = "vdd_arm"; |
| 372 | regulator-min-microvolt = <850000>; |
| 373 | regulator-max-microvolt = <1350000>; |
| 374 | regulator-always-on; |
| 375 | regulator-boot-on; |
| 376 | }; |
| 377 | |
| 378 | buck3_reg: BUCK3 { |
| 379 | regulator-name = "vdd_int"; |
| 380 | regulator-min-microvolt = <900000>; |
| 381 | regulator-max-microvolt = <1200000>; |
| 382 | regulator-always-on; |
| 383 | regulator-boot-on; |
| 384 | }; |
| 385 | |
| 386 | buck4_reg: BUCK4 { |
| 387 | regulator-name = "vdd_g3d"; |
| 388 | regulator-min-microvolt = <850000>; |
| 389 | regulator-max-microvolt = <1300000>; |
| 390 | regulator-always-on; |
| 391 | regulator-boot-on; |
| 392 | }; |
| 393 | |
| 394 | buck5_reg: BUCK5 { |
| 395 | regulator-name = "P1.8V_BUCK_OUT5"; |
| 396 | regulator-min-microvolt = <1800000>; |
| 397 | regulator-max-microvolt = <1800000>; |
| 398 | regulator-always-on; |
| 399 | regulator-boot-on; |
| 400 | }; |
| 401 | |
| 402 | buck6_reg: BUCK6 { |
| 403 | regulator-name = "P1.35V_BUCK_OUT6"; |
| 404 | regulator-min-microvolt = <1350000>; |
| 405 | regulator-max-microvolt = <1350000>; |
| 406 | regulator-always-on; |
| 407 | }; |
| 408 | |
| 409 | buck7_reg: BUCK7 { |
| 410 | regulator-name = "P2.0V_BUCK_OUT7"; |
| 411 | regulator-min-microvolt = <2000000>; |
| 412 | regulator-max-microvolt = <2000000>; |
| 413 | regulator-always-on; |
| 414 | }; |
| 415 | |
| 416 | buck8_reg: BUCK8 { |
| 417 | regulator-name = "P2.85V_BUCK_OUT8"; |
| 418 | regulator-min-microvolt = <2850000>; |
| 419 | regulator-max-microvolt = <2850000>; |
| 420 | regulator-always-on; |
| 421 | }; |
| 422 | }; |
| 423 | }; |
| 424 | }; |
| 425 | |
| 426 | &i2c_1 { |
| 427 | status = "okay"; |
| 428 | samsung,i2c-sda-delay = <100>; |
| 429 | samsung,i2c-max-bus-freq = <378000>; |
| 430 | |
| 431 | trackpad { |
| 432 | reg = <0x67>; |
| 433 | compatible = "cypress,cyapa"; |
| 434 | interrupts = <2 IRQ_TYPE_NONE>; |
| 435 | interrupt-parent = <&gpx1>; |
| 436 | wakeup-source; |
| 437 | }; |
| 438 | }; |
| 439 | |
| 440 | /* |
| 441 | * Disabled pullups since external part has its own pullups and |
| 442 | * double-pulling gets us out of spec in some cases. |
| 443 | */ |
| 444 | &i2c2_bus { |
| 445 | samsung,pin-pud = <0>; |
| 446 | }; |
| 447 | |
| 448 | &i2c_2 { |
| 449 | status = "okay"; |
| 450 | samsung,i2c-sda-delay = <100>; |
| 451 | samsung,i2c-max-bus-freq = <66000>; |
| 452 | |
| 453 | hdmiddc@50 { |
| 454 | compatible = "samsung,exynos4210-hdmiddc"; |
| 455 | reg = <0x50>; |
| 456 | }; |
| 457 | }; |
| 458 | |
| 459 | &i2c_3 { |
| 460 | status = "okay"; |
| 461 | samsung,i2c-sda-delay = <100>; |
| 462 | samsung,i2c-max-bus-freq = <66000>; |
| 463 | }; |
| 464 | |
| 465 | &i2c_4 { |
| 466 | status = "okay"; |
| 467 | samsung,i2c-sda-delay = <100>; |
| 468 | samsung,i2c-max-bus-freq = <66000>; |
| 469 | }; |
| 470 | |
| 471 | &i2c_5 { |
| 472 | status = "okay"; |
| 473 | samsung,i2c-sda-delay = <100>; |
| 474 | samsung,i2c-max-bus-freq = <66000>; |
| 475 | }; |
| 476 | |
| 477 | &i2c_7 { |
| 478 | status = "okay"; |
| 479 | samsung,i2c-sda-delay = <100>; |
| 480 | samsung,i2c-max-bus-freq = <66000>; |
| 481 | |
| 482 | ptn3460: lvds-bridge@20 { |
| 483 | compatible = "nxp,ptn3460"; |
| 484 | reg = <0x20>; |
| 485 | powerdown-gpios = <&gpy2 5 GPIO_ACTIVE_HIGH>; |
| 486 | reset-gpios = <&gpx1 5 GPIO_ACTIVE_HIGH>; |
| 487 | edid-emulation = <5>; |
| 488 | |
| 489 | ports { |
| 490 | port@0 { |
| 491 | bridge_out: endpoint { |
| 492 | remote-endpoint = <&panel_in>; |
| 493 | }; |
| 494 | }; |
| 495 | |
| 496 | port@1 { |
| 497 | bridge_in: endpoint { |
| 498 | remote-endpoint = <&dp_out>; |
| 499 | }; |
| 500 | }; |
| 501 | }; |
| 502 | }; |
| 503 | }; |
| 504 | |
| 505 | &i2c_8 { |
| 506 | status = "okay"; |
| 507 | samsung,i2c-sda-delay = <100>; |
| 508 | samsung,i2c-max-bus-freq = <378000>; |
| 509 | |
| 510 | hdmiphy: hdmiphy@38 { |
| 511 | compatible = "samsung,exynos4212-hdmiphy"; |
| 512 | reg = <0x38>; |
| 513 | }; |
| 514 | }; |
| 515 | |
| 516 | &i2s0 { |
| 517 | status = "okay"; |
| 518 | }; |
| 519 | |
| 520 | &mmc_0 { |
| 521 | status = "okay"; |
| 522 | num-slots = <1>; |
Javier Martinez Canillas | 241658f | 2015-10-15 18:51:13 +0200 | [diff] [blame] | 523 | non-removable; |
Javier Martinez Canillas | 6c6000c | 2015-09-30 15:53:55 +0900 | [diff] [blame] | 524 | samsung,dw-mshc-ciu-div = <3>; |
| 525 | samsung,dw-mshc-sdr-timing = <2 3>; |
| 526 | samsung,dw-mshc-ddr-timing = <1 2>; |
| 527 | pinctrl-names = "default"; |
| 528 | pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_cd &sd0_bus4 &sd0_bus8>; |
| 529 | bus-width = <8>; |
| 530 | cap-mmc-highspeed; |
| 531 | }; |
| 532 | |
| 533 | &mmc_2 { |
| 534 | status = "okay"; |
| 535 | num-slots = <1>; |
| 536 | card-detect-delay = <200>; |
| 537 | samsung,dw-mshc-ciu-div = <3>; |
| 538 | samsung,dw-mshc-sdr-timing = <2 3>; |
| 539 | samsung,dw-mshc-ddr-timing = <1 2>; |
| 540 | pinctrl-names = "default"; |
| 541 | pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_cd &sd2_bus4>; |
| 542 | bus-width = <4>; |
| 543 | wp-gpios = <&gpc2 1 GPIO_ACTIVE_HIGH>; |
| 544 | cap-sd-highspeed; |
| 545 | }; |
| 546 | |
| 547 | /* |
| 548 | * On Snow we've got SIP WiFi and so can keep drive strengths low to |
| 549 | * reduce EMI. |
| 550 | */ |
| 551 | &mmc_3 { |
| 552 | status = "okay"; |
| 553 | num-slots = <1>; |
Javier Martinez Canillas | 7834827 | 2015-10-15 18:51:10 +0200 | [diff] [blame] | 554 | non-removable; |
Javier Martinez Canillas | 6c6000c | 2015-09-30 15:53:55 +0900 | [diff] [blame] | 555 | cap-sdio-irq; |
| 556 | keep-power-in-suspend; |
Javier Martinez Canillas | 6c6000c | 2015-09-30 15:53:55 +0900 | [diff] [blame] | 557 | samsung,dw-mshc-ciu-div = <3>; |
| 558 | samsung,dw-mshc-sdr-timing = <2 3>; |
| 559 | samsung,dw-mshc-ddr-timing = <1 2>; |
| 560 | pinctrl-names = "default"; |
| 561 | pinctrl-0 = <&sd3_clk &sd3_cmd &sd3_bus4 &wifi_en &wifi_rst>; |
| 562 | bus-width = <4>; |
| 563 | cap-sd-highspeed; |
| 564 | mmc-pwrseq = <&mmc3_pwrseq>; |
| 565 | }; |
| 566 | |
| 567 | &pinctrl_0 { |
| 568 | wifi_en: wifi-en { |
| 569 | samsung,pins = "gpx0-1"; |
| 570 | samsung,pin-function = <1>; |
| 571 | samsung,pin-pud = <0>; |
| 572 | samsung,pin-drv = <0>; |
| 573 | }; |
| 574 | |
| 575 | wifi_rst: wifi-rst { |
| 576 | samsung,pins = "gpx0-2"; |
| 577 | samsung,pin-function = <1>; |
| 578 | samsung,pin-pud = <0>; |
| 579 | samsung,pin-drv = <0>; |
| 580 | }; |
| 581 | |
| 582 | power_key_irq: power-key-irq { |
| 583 | samsung,pins = "gpx1-3"; |
| 584 | samsung,pin-function = <0xf>; |
| 585 | samsung,pin-pud = <0>; |
| 586 | samsung,pin-drv = <0>; |
| 587 | }; |
| 588 | |
| 589 | ec_irq: ec-irq { |
| 590 | samsung,pins = "gpx1-6"; |
| 591 | samsung,pin-function = <0>; |
| 592 | samsung,pin-pud = <0>; |
| 593 | samsung,pin-drv = <0>; |
| 594 | }; |
| 595 | |
| 596 | tps65090_irq: tps65090-irq { |
| 597 | samsung,pins = "gpx2-6"; |
| 598 | samsung,pin-function = <0>; |
| 599 | samsung,pin-pud = <0>; |
| 600 | samsung,pin-drv = <0>; |
| 601 | }; |
| 602 | |
| 603 | usb3_vbus_en: usb3-vbus-en { |
| 604 | samsung,pins = "gpx2-7"; |
| 605 | samsung,pin-function = <1>; |
| 606 | samsung,pin-pud = <0>; |
| 607 | samsung,pin-drv = <0>; |
| 608 | }; |
| 609 | |
| 610 | max77686_irq: max77686-irq { |
| 611 | samsung,pins = "gpx3-2"; |
| 612 | samsung,pin-function = <0>; |
| 613 | samsung,pin-pud = <0>; |
| 614 | samsung,pin-drv = <0>; |
| 615 | }; |
| 616 | |
| 617 | lid_irq: lid-irq { |
| 618 | samsung,pins = "gpx3-5"; |
| 619 | samsung,pin-function = <0xf>; |
| 620 | samsung,pin-pud = <0>; |
| 621 | samsung,pin-drv = <0>; |
| 622 | }; |
| 623 | |
| 624 | hdmi_hpd_irq: hdmi-hpd-irq { |
| 625 | samsung,pins = "gpx3-7"; |
| 626 | samsung,pin-function = <0>; |
| 627 | samsung,pin-pud = <1>; |
| 628 | samsung,pin-drv = <0>; |
| 629 | }; |
| 630 | }; |
| 631 | |
| 632 | &pinctrl_1 { |
| 633 | arb_their_claim: arb-their-claim { |
| 634 | samsung,pins = "gpe0-4"; |
| 635 | samsung,pin-function = <0>; |
| 636 | samsung,pin-pud = <3>; |
| 637 | samsung,pin-drv = <0>; |
| 638 | }; |
| 639 | |
| 640 | arb_our_claim: arb-our-claim { |
| 641 | samsung,pins = "gpf0-3"; |
| 642 | samsung,pin-function = <1>; |
| 643 | samsung,pin-pud = <0>; |
| 644 | samsung,pin-drv = <0>; |
| 645 | }; |
| 646 | }; |
| 647 | |
| 648 | &rtc { |
| 649 | status = "okay"; |
| 650 | clocks = <&clock CLK_RTC>, <&max77686 MAX77686_CLK_AP>; |
| 651 | clock-names = "rtc", "rtc_src"; |
| 652 | }; |
| 653 | |
| 654 | &sd3_bus4 { |
| 655 | samsung,pin-drv = <0>; |
| 656 | }; |
| 657 | |
| 658 | &sd3_clk { |
| 659 | samsung,pin-drv = <0>; |
| 660 | }; |
| 661 | |
| 662 | &sd3_cmd { |
| 663 | samsung,pin-pud = <3>; |
| 664 | samsung,pin-drv = <0>; |
| 665 | }; |
| 666 | |
| 667 | &spi_1 { |
| 668 | status = "okay"; |
| 669 | samsung,spi-src-clk = <0>; |
| 670 | num-cs = <1>; |
| 671 | cs-gpios = <&gpa2 5 GPIO_ACTIVE_HIGH>; |
| 672 | }; |
| 673 | |
| 674 | &usbdrd_dwc3 { |
| 675 | dr_mode = "host"; |
| 676 | }; |
| 677 | |
| 678 | &usbdrd_phy { |
| 679 | vbus-supply = <&usb3_vbus_reg>; |
| 680 | }; |
| 681 | |
| 682 | #include "cros-ec-keyboard.dtsi" |