blob: b6e39739a36d01e2da283e806de131a4bc18890d [file] [log] [blame]
Catalin Marinas04f70332009-06-11 13:22:39 +01001Kernel Memory Leak Detector
2===========================
3
4Introduction
5------------
6
7Kmemleak provides a way of detecting possible kernel memory leaks in a
8way similar to a tracing garbage collector
9(http://en.wikipedia.org/wiki/Garbage_collection_%28computer_science%29#Tracing_garbage_collectors),
10with the difference that the orphan objects are not freed but only
11reported via /sys/kernel/debug/kmemleak. A similar method is used by the
12Valgrind tool (memcheck --leak-check) to detect the memory leaks in
13user-space applications.
Maxin B. John06a2c452011-06-15 12:58:29 -070014
15Please check DEBUG_KMEMLEAK dependencies in lib/Kconfig.debug for supported
16architectures.
Catalin Marinas04f70332009-06-11 13:22:39 +010017
18Usage
19-----
20
21CONFIG_DEBUG_KMEMLEAK in "Kernel hacking" has to be enabled. A kernel
Catalin Marinasbab4a342009-06-26 17:38:26 +010022thread scans the memory every 10 minutes (by default) and prints the
Catalin Marinas4698c1f2009-06-26 17:38:27 +010023number of new unreferenced objects found. To display the details of all
24the possible memory leaks:
Catalin Marinas04f70332009-06-11 13:22:39 +010025
26 # mount -t debugfs nodev /sys/kernel/debug/
27 # cat /sys/kernel/debug/kmemleak
28
Catalin Marinas4698c1f2009-06-26 17:38:27 +010029To trigger an intermediate memory scan:
30
31 # echo scan > /sys/kernel/debug/kmemleak
32
Luis R. Rodriguez30b37102009-09-04 17:44:51 -070033To clear the list of all current possible memory leaks:
34
35 # echo clear > /sys/kernel/debug/kmemleak
36
37New leaks will then come up upon reading /sys/kernel/debug/kmemleak
38again.
39
Catalin Marinas04f70332009-06-11 13:22:39 +010040Note that the orphan objects are listed in the order they were allocated
41and one object at the beginning of the list may cause other subsequent
42objects to be reported as orphan.
43
44Memory scanning parameters can be modified at run-time by writing to the
45/sys/kernel/debug/kmemleak file. The following parameters are supported:
46
47 off - disable kmemleak (irreversible)
Catalin Marinase0a2a162009-06-26 17:38:25 +010048 stack=on - enable the task stacks scanning (default)
Catalin Marinas04f70332009-06-11 13:22:39 +010049 stack=off - disable the tasks stacks scanning
Catalin Marinase0a2a162009-06-26 17:38:25 +010050 scan=on - start the automatic memory scanning thread (default)
Catalin Marinas04f70332009-06-11 13:22:39 +010051 scan=off - stop the automatic memory scanning thread
Catalin Marinase0a2a162009-06-26 17:38:25 +010052 scan=<secs> - set the automatic memory scanning period in seconds
53 (default 600, 0 to stop the automatic scanning)
Catalin Marinas4698c1f2009-06-26 17:38:27 +010054 scan - trigger a memory scan
Luis R. Rodriguez30b37102009-09-04 17:44:51 -070055 clear - clear list of current memory leak suspects, done by
56 marking all current reported unreferenced objects grey
Catalin Marinas189d84e2009-08-27 14:29:15 +010057 dump=<addr> - dump information about the object found at <addr>
Catalin Marinas04f70332009-06-11 13:22:39 +010058
59Kmemleak can also be disabled at boot-time by passing "kmemleak=off" on
60the kernel command line.
61
Catalin Marinasa9d90582009-06-25 10:16:11 +010062Memory may be allocated or freed before kmemleak is initialised and
63these actions are stored in an early log buffer. The size of this buffer
64is configured via the CONFIG_DEBUG_KMEMLEAK_EARLY_LOG_SIZE option.
65
Catalin Marinas04f70332009-06-11 13:22:39 +010066Basic Algorithm
67---------------
68
69The memory allocations via kmalloc, vmalloc, kmem_cache_alloc and
70friends are traced and the pointers, together with additional
71information like size and stack trace, are stored in a prio search tree.
72The corresponding freeing function calls are tracked and the pointers
73removed from the kmemleak data structures.
74
75An allocated block of memory is considered orphan if no pointer to its
76start address or to any location inside the block can be found by
77scanning the memory (including saved registers). This means that there
78might be no way for the kernel to pass the address of the allocated
79block to a freeing function and therefore the block is considered a
80memory leak.
81
82The scanning algorithm steps:
83
84 1. mark all objects as white (remaining white objects will later be
85 considered orphan)
86 2. scan the memory starting with the data section and stacks, checking
87 the values against the addresses stored in the prio search tree. If
88 a pointer to a white object is found, the object is added to the
89 gray list
90 3. scan the gray objects for matching addresses (some white objects
91 can become gray and added at the end of the gray list) until the
92 gray set is finished
93 4. the remaining white objects are considered orphan and reported via
94 /sys/kernel/debug/kmemleak
95
96Some allocated memory blocks have pointers stored in the kernel's
97internal data structures and they cannot be detected as orphans. To
98avoid this, kmemleak can also store the number of values pointing to an
99address inside the block address range that need to be found so that the
100block is not considered a leak. One example is __vmalloc().
101
Luis R. Rodriguez30b37102009-09-04 17:44:51 -0700102Testing specific sections with kmemleak
103---------------------------------------
104
105Upon initial bootup your /sys/kernel/debug/kmemleak output page may be
106quite extensive. This can also be the case if you have very buggy code
107when doing development. To work around these situations you can use the
108'clear' command to clear all reported unreferenced objects from the
109/sys/kernel/debug/kmemleak output. By issuing a 'scan' after a 'clear'
110you can find new unreferenced objects; this should help with testing
111specific sections of code.
112
113To test a critical section on demand with a clean kmemleak do:
114
115 # echo clear > /sys/kernel/debug/kmemleak
116 ... test your kernel or modules ...
117 # echo scan > /sys/kernel/debug/kmemleak
118
119Then as usual to get your report with:
120
121 # cat /sys/kernel/debug/kmemleak
122
Catalin Marinas04f70332009-06-11 13:22:39 +0100123Kmemleak API
124------------
125
126See the include/linux/kmemleak.h header for the functions prototype.
127
128kmemleak_init - initialize kmemleak
129kmemleak_alloc - notify of a memory block allocation
Catalin Marinasf528f0b2011-09-26 17:12:53 +0100130kmemleak_alloc_percpu - notify of a percpu memory block allocation
Catalin Marinas04f70332009-06-11 13:22:39 +0100131kmemleak_free - notify of a memory block freeing
Catalin Marinasf528f0b2011-09-26 17:12:53 +0100132kmemleak_free_part - notify of a partial memory block freeing
133kmemleak_free_percpu - notify of a percpu memory block freeing
Catalin Marinas04f70332009-06-11 13:22:39 +0100134kmemleak_not_leak - mark an object as not a leak
135kmemleak_ignore - do not scan or report an object as leak
136kmemleak_scan_area - add scan areas inside a memory block
137kmemleak_no_scan - do not scan a memory block
138kmemleak_erase - erase an old value in a pointer variable
139kmemleak_alloc_recursive - as kmemleak_alloc but checks the recursiveness
140kmemleak_free_recursive - as kmemleak_free but checks the recursiveness
141
142Dealing with false positives/negatives
143--------------------------------------
144
145The false negatives are real memory leaks (orphan objects) but not
146reported by kmemleak because values found during the memory scanning
147point to such objects. To reduce the number of false negatives, kmemleak
148provides the kmemleak_ignore, kmemleak_scan_area, kmemleak_no_scan and
149kmemleak_erase functions (see above). The task stacks also increase the
150amount of false negatives and their scanning is not enabled by default.
151
152The false positives are objects wrongly reported as being memory leaks
153(orphan). For objects known not to be leaks, kmemleak provides the
154kmemleak_not_leak function. The kmemleak_ignore could also be used if
155the memory block is known not to contain other pointers and it will no
156longer be scanned.
157
158Some of the reported leaks are only transient, especially on SMP
159systems, because of pointers temporarily stored in CPU registers or
160stacks. Kmemleak defines MSECS_MIN_AGE (defaulting to 1000) representing
161the minimum age of an object to be reported as a memory leak.
162
163Limitations and Drawbacks
164-------------------------
165
166The main drawback is the reduced performance of memory allocation and
167freeing. To avoid other penalties, the memory scanning is only performed
168when the /sys/kernel/debug/kmemleak file is read. Anyway, this tool is
169intended for debugging purposes where the performance might not be the
170most important requirement.
171
172To keep the algorithm simple, kmemleak scans for values pointing to any
173address inside a block's address range. This may lead to an increased
174number of false negatives. However, it is likely that a real memory leak
175will eventually become visible.
176
177Another source of false negatives is the data stored in non-pointer
178values. In a future version, kmemleak could only scan the pointer
179members in the allocated structures. This feature would solve many of
180the false negative cases described above.
181
182The tool can report false positives. These are cases where an allocated
183block doesn't need to be freed (some cases in the init_call functions),
184the pointer is calculated by other methods than the usual container_of
185macro or the pointer is stored in a location not scanned by kmemleak.
186
Daniel Baluta21b86bd2011-04-04 14:58:03 -0700187Page allocations and ioremap are not tracked.