blob: 8918ac905a3b1face373e3a0ad456c2d3bf6d95b [file] [log] [blame]
Linus Torvalds1da177e2005-04-16 15:20:36 -07001
2 JFFS2 LOCKING DOCUMENTATION
3 ---------------------------
4
Linus Torvalds1da177e2005-04-16 15:20:36 -07005This document attempts to describe the existing locking rules for
6JFFS2. It is not expected to remain perfectly up to date, but ought to
7be fairly close.
8
9
10 alloc_sem
11 ---------
12
David Woodhouseced22072008-04-22 15:13:40 +010013The alloc_sem is a per-filesystem mutex, used primarily to ensure
Linus Torvalds1da177e2005-04-16 15:20:36 -070014contiguous allocation of space on the medium. It is automatically
15obtained during space allocations (jffs2_reserve_space()) and freed
16upon write completion (jffs2_complete_reservation()). Note that
17the garbage collector will obtain this right at the beginning of
18jffs2_garbage_collect_pass() and release it at the end, thereby
19preventing any other write activity on the file system during a
20garbage collect pass.
21
22When writing new nodes, the alloc_sem must be held until the new nodes
23have been properly linked into the data structures for the inode to
24which they belong. This is for the benefit of NAND flash - adding new
25nodes to an inode may obsolete old ones, and by holding the alloc_sem
26until this happens we ensure that any data in the write-buffer at the
27time this happens are part of the new node, not just something that
28was written afterwards. Hence, we can ensure the newly-obsoleted nodes
29don't actually get erased until the write-buffer has been flushed to
30the medium.
31
32With the introduction of NAND flash support and the write-buffer,
33the alloc_sem is also used to protect the wbuf-related members of the
34jffs2_sb_info structure. Atomically reading the wbuf_len member to see
35if the wbuf is currently holding any data is permitted, though.
36
37Ordering constraints: See f->sem.
38
39
David Woodhouseced22072008-04-22 15:13:40 +010040 File Mutex f->sem
Linus Torvalds1da177e2005-04-16 15:20:36 -070041 ---------------------
42
David Woodhouseced22072008-04-22 15:13:40 +010043This is the JFFS2-internal equivalent of the inode mutex i->i_sem.
Linus Torvalds1da177e2005-04-16 15:20:36 -070044It protects the contents of the jffs2_inode_info private inode data,
45including the linked list of node fragments (but see the notes below on
46erase_completion_lock), etc.
47
48The reason that the i_sem itself isn't used for this purpose is to
49avoid deadlocks with garbage collection -- the VFS will lock the i_sem
50before calling a function which may need to allocate space. The
51allocation may trigger garbage-collection, which may need to move a
52node belonging to the inode which was locked in the first place by the
53VFS. If the garbage collection code were to attempt to lock the i_sem
54of the inode from which it's garbage-collecting a physical node, this
55lead to deadlock, unless we played games with unlocking the i_sem
56before calling the space allocation functions.
57
58Instead of playing such games, we just have an extra internal
David Woodhouseced22072008-04-22 15:13:40 +010059mutex, which is obtained by the garbage collection code and also
Linus Torvalds1da177e2005-04-16 15:20:36 -070060by the normal file system code _after_ allocation of space.
61
62Ordering constraints:
63
64 1. Never attempt to allocate space or lock alloc_sem with
65 any f->sem held.
David Woodhouseced22072008-04-22 15:13:40 +010066 2. Never attempt to lock two file mutexes in one thread.
Linus Torvalds1da177e2005-04-16 15:20:36 -070067 No ordering rules have been made for doing so.
David Woodhouse49e91e72016-02-01 12:37:20 +000068 3. Never lock a page cache page with f->sem held.
Linus Torvalds1da177e2005-04-16 15:20:36 -070069
70
71 erase_completion_lock spinlock
72 ------------------------------
73
74This is used to serialise access to the eraseblock lists, to the
75per-eraseblock lists of physical jffs2_raw_node_ref structures, and
76(NB) the per-inode list of physical nodes. The latter is a special
77case - see below.
78
79As the MTD API no longer permits erase-completion callback functions
80to be called from bottom-half (timer) context (on the basis that nobody
81ever actually implemented such a thing), it's now sufficient to use
82a simple spin_lock() rather than spin_lock_bh().
83
84Note that the per-inode list of physical nodes (f->nodes) is a special
85case. Any changes to _valid_ nodes (i.e. ->flash_offset & 1 == 0) in
David Woodhouseced22072008-04-22 15:13:40 +010086the list are protected by the file mutex f->sem. But the erase code
87may remove _obsolete_ nodes from the list while holding only the
Linus Torvalds1da177e2005-04-16 15:20:36 -070088erase_completion_lock. So you can walk the list only while holding the
89erase_completion_lock, and can drop the lock temporarily mid-walk as
90long as the pointer you're holding is to a _valid_ node, not an
91obsolete one.
92
93The erase_completion_lock is also used to protect the c->gc_task
94pointer when the garbage collection thread exits. The code to kill the
95GC thread locks it, sends the signal, then unlocks it - while the GC
96thread itself locks it, zeroes c->gc_task, then unlocks on the exit path.
97
98
99 inocache_lock spinlock
100 ----------------------
101
102This spinlock protects the hashed list (c->inocache_list) of the
103in-core jffs2_inode_cache objects (each inode in JFFS2 has the
104correspondent jffs2_inode_cache object). So, the inocache_lock
105has to be locked while walking the c->inocache_list hash buckets.
106
David Woodhouse7d200962005-04-13 14:22:38 +0100107This spinlock also covers allocation of new inode numbers, which is
108currently just '++->highest_ino++', but might one day get more complicated
109if we need to deal with wrapping after 4 milliard inode numbers are used.
110
Linus Torvalds1da177e2005-04-16 15:20:36 -0700111Note, the f->sem guarantees that the correspondent jffs2_inode_cache
112will not be removed. So, it is allowed to access it without locking
113the inocache_lock spinlock.
114
115Ordering constraints:
116
117 If both erase_completion_lock and inocache_lock are needed, the
118 c->erase_completion has to be acquired first.
119
120
121 erase_free_sem
122 --------------
123
David Woodhouseced22072008-04-22 15:13:40 +0100124This mutex is only used by the erase code which frees obsolete node
125references and the jffs2_garbage_collect_deletion_dirent() function.
126The latter function on NAND flash must read _obsolete_ nodes to
127determine whether the 'deletion dirent' under consideration can be
Linus Torvalds1da177e2005-04-16 15:20:36 -0700128discarded or whether it is still required to show that an inode has
129been unlinked. Because reading from the flash may sleep, the
130erase_completion_lock cannot be held, so an alternative, more
131heavyweight lock was required to prevent the erase code from freeing
132the jffs2_raw_node_ref structures in question while the garbage
133collection code is looking at them.
134
135Suggestions for alternative solutions to this problem would be welcomed.
136
137
138 wbuf_sem
139 --------
140
141This read/write semaphore protects against concurrent access to the
142write-behind buffer ('wbuf') used for flash chips where we must write
143in blocks. It protects both the contents of the wbuf and the metadata
144which indicates which flash region (if any) is currently covered by
145the buffer.
146
147Ordering constraints:
148 Lock wbuf_sem last, after the alloc_sem or and f->sem.
KaiGai Kohei8b0b3392006-05-13 15:14:14 +0900149
150
151 c->xattr_sem
152 ------------
153
154This read/write semaphore protects against concurrent access to the
155xattr related objects which include stuff in superblock and ic->xref.
156In read-only path, write-semaphore is too much exclusion. It's enough
157by read-semaphore. But you must hold write-semaphore when updating,
158creating or deleting any xattr related object.
159
160Once xattr_sem released, there would be no assurance for the existence
161of those objects. Thus, a series of processes is often required to retry,
162when updating such a object is necessary under holding read semaphore.
163For example, do_jffs2_getxattr() holds read-semaphore to scan xref and
164xdatum at first. But it retries this process with holding write-semaphore
165after release read-semaphore, if it's necessary to load name/value pair
166from medium.
167
168Ordering constraints:
169 Lock xattr_sem last, after the alloc_sem.